To prepare for handling of XferComplete event, let's refactor and split
up dwc3_gadget_endpoint_transfer_in_progress() to handle TRBs completion
for different events. The handling of TRBs completion will be the same,
but the status of XferComplete event is different than XferInProgress.
No functional change in this commit.
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
While handling TRBs completion, if a END_TRANSFER command isn't
completed, don't kick new transfer or issue END_TRANSFER command.
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Set the request->is_last to each stream request to indicate that the
request is the last stream request of a transfer. The DWC3 controller
needs to know this info to properly switch streams. The current
implementation of f_tcm uses a single request per transfer, so every
stream request is the last of its stream.
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
DWC_usb32 supports MDWIDTH value larger than 255 and up to 1023. The
field HWPARAMS6[9:8] stores the upper 2-bit values of the DWC_usb32's
MDWIDTH. Check that parameter and properly get the MDWIDTH for
DWC_usb32.
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Synopsys introduces a new controller DWC_usb32. It supports dual-lane
and speed up to 20 Gbps, and the DWC3 driver will drive this controller.
Currently the driver uses a single field dwc->revision to ID both
DWC_usb3 and DWC_usb31 and their version number. This was sufficient for
two IPs, but this method doesn't work with additional IPs. As a result,
let's separate the dwc->revision field to 2 separate fields: ip and
revision. The ip field now stores the ID of the controller's IP while
the revision field stores the controller's version number.
This new scheme enforces DWC3 to compare the revision within the same IP
only. As a result, we must update all the revision check of the
controller to check its corresponding IP.
To help with this enforcement, we create a few macros to help with
the common version checks:
DWC3_IP_IS(IP)
DWC3_VER_IS(IP, VERSION)
DWC3_VER_IS_PRIOR(IP, VERSION)
DWC3_VER_IS_WITHIN(IP, LOWER_VERSION, UPPER_VERSION)
DWC3_VER_TYPE_IS_WITHIN(IP, VERSION,
LOWER_VERSION_TYPE,
UPPER_VERSION_TYPE)
The DWC_usb32 controller operates using the same programming model and
with very similar configurations as its previous controllers. Please
note that the various IP and revision checks in this patch match the
current checks for DWC_usb31 version 1.90a. Additional configurations
that are unique to DWC_usb32 are applied separately.
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
OTG port on Tegra194 supports GEN1 speeds when in device mode and GEN2
speeds when in host mode. dd port_speed_quirk that configures port to
GEN1/GEN2 speds, corresponding to the mode.
Based on work by WayneChang <waynec@nvidia.com>
Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
This commit adds support for XUSB device mode controller support on
Tegra194 SoC. This is very similar to the existing Tegra186 XUDC, with lpm
support added in addition.
Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Sparse reports a warning at set_link_state()
warning: context imbalance in set_link_state() - unexpected unlock
The root cause is the missing annotation at set_link_state()
Add the missing __must_hold(&dum->lock)
Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Sparse reports a warning at xudc_handle_setup()
warning: context imbalance in xudc_handle_setup() - unexpected unlock
The root cause is the missing annotation at xudc_handle_setup()
Add the missing __must_hold(&udc->lock) annotation
Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
module_usb_composite_driver() makes the code simpler by
eliminating boilerplate code.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Fix the following coccicheck warning:
drivers/usb/gadget/udc/omap_udc.c:2579:2-3: Unneeded semicolon
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Fix the following coccicheck warning:
drivers/usb/gadget/udc/mv_u3d_core.c:1551:5-13: WARNING: Comparison to
bool
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Fix the following coccicheck warning:
drivers/usb/gadget/udc/net2272.c:57:12-19: WARNING: Assignment of 0/1 to
bool variable
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Fix the following coccicheck warning:
drivers/usb/dwc3/drd.c:85:3-24: WARNING: Assignment of 0/1 to bool
variable
drivers/usb/dwc3/drd.c:59:2-23: WARNING: Assignment of 0/1 to bool
variable
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
The variable status is being assigned a value that is never read
and it is being updated later with a new value. The assignment
is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Clang warns:
drivers/usb/gadget/udc/s3c2410_udc.c:255:11: warning: comparison of
address of 'ep->queue' equal to a null pointer is always false
[-Wtautological-pointer-compare]
if (&ep->queue == NULL)
~~~~^~~~~ ~~~~
1 warning generated.
It is not wrong, queue is not a pointer so if ep is not NULL, the
address of queue cannot be NULL. No other driver does a check like this
and this check has been around since the driver was first introduced,
presumably with no issues so it does not seem like this check should be
something else. Just remove it.
Commit afe956c577 ("kbuild: Enable -Wtautological-compare") exposed
this but it is not the root cause of the warning.
Fixes: 3fc154b6b8 ("USB Gadget driver for Samsung s3c2410 ARM SoC")
Link: https://github.com/ClangBuiltLinux/linux/issues/1004
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Add suspend resume callbacks to notify u_serial of the bus suspend/resume
state.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Add suspend resume callbacks to notify u_serial of the bus suspend/resume
state.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Add suspend resume callbacks to handle the case seen when the bus is
suspended by the HOST, and the device opens the port (cat /dev/ttyGS0).
Gadget controller (like DWC2) doesn't accept usb requests to be queued in
this case (when in L2 state), from the gs_open() call. Error log is printed
- configfs-gadget gadget: acm ttyGS0 can't notify serial state, -11
If the HOST resumes (opens) the bus, the port still isn't functional.
Use suspend/resume callbacks to monitor the gadget suspended state by using
'suspended' flag. In case the port gets opened (cat /dev/ttyGS0), the I/O
stream will be delayed until the bus gets resumed by the HOST.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
When the remote wakeup interrupt is triggered, lx_state is resumed from L2
to L0 state. But when the gadget resume is called, lx_state is still L2.
This prevents the resume callback to queue any request. Any attempt
to queue a request from resume callback will result in:
- "submit request only in active state" debug message to be issued
- dwc2_hsotg_ep_queue() returns -EAGAIN
Call the gadget resume routine after the core is in L0 state.
Fixes: f81f46e1f5 ("usb: dwc2: implement hibernation during bus suspend/resume")
Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
This patch changes the function uvc_video_pump to be a separate
scheduled worker. This way the completion handler of each usb request
and every direct caller of the pump has only to schedule the worker
instead of doing the request handling by itself.
Moving the request handling to one thread solves the locking problems
between the three queueing cases in the completion handler, v4l2_qbuf
and video_enable.
Many drivers handle the completion handlers directly in their interrupt
handlers. This patch also reduces the workload on each interrupt.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
This patch corrects the SPDX License Identifier style in
header files related to Renesas USBHS Controller Drivers.
For C header files Documentation/process/license-rules.rst
mandates C-like comments (opposed to C source files where
C++ style should be used).
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46.
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Fix the following coccicheck warning:
drivers/usb/gadget/function/f_fs.c:2507:2-3: Unneeded semicolon
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
There is now a dedicated driver for these SoCs making the old compatible
obsolete.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
In order to add support for the Amlogic GXL/GXM USB Glue, this adds
the corresponding :
- PHY names
- clock names
- USB2 PHY init and mode set
- regmap setup
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
On the Amlogic GXL/GXM SoCs, the OTG PHY status signals are always
connected to the DWC3 controller, thus crashing the controller when
switching to OTG mode when port is not populated with a device/cable to
Host.
Amlogic added a bit to disconnect the OTG PHY status signals from the DWC3
to be used when switching the OTG PHY as Device to the DWC2 controller.
The drawback is that it makes the DWC3 port state machine stall and needs
a full reset of the DWC3 controller to get connect status to the port
connected to the OTG PHY, but not the other one.
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Refactor the USB init code patch to handle the Amlogic GXL/GXM needing
to initialize the OTG port as Peripheral mode for the DWC2 IP to probe
correctly.
A secondary, post_init callback is added to setup the OTG PHY mode after
powering up the PHYs and before probing the DWC2 and DWC3 controllers.
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Fix the following gcc warning:
drivers/usb/gadget/udc/gr_udc.c:51:19: warning: ‘driver_desc’ defined
but not used [-Wunused-const-variable=]
static const char driver_desc[] = DRIVER_DESC;
^~~~~~~~~~~
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Message logged by 'dev_xxx()' or 'pr_xxx()' should end with a '\n'.
Fixes: 48ba02b2e2 ("usb: gadget: add udc driver for max3420")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
This patch corrects the SPDX License Identifier style in
header files related to MediaTek USB3 Dual Role controller.
For C header files Documentation/process/license-rules.rst
mandates C-like comments (opposed to C source files where
C++ style should be used).
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46.
Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
During device mode initialization, lots of device information
are printed to console, see below. Change them as debug message.
cdns-usb3 5b130000.cdns3: Initialized ep0 support:
cdns-usb3 5b130000.cdns3: Initialized ep1out support: BULK, INT ISO
cdns-usb3 5b130000.cdns3: Initialized ep2out support: BULK, INT ISO
cdns-usb3 5b130000.cdns3: Initialized ep3out support: BULK, INT ISO
cdns-usb3 5b130000.cdns3: Initialized ep4out support: BULK, INT ISO
cdns-usb3 5b130000.cdns3: Initialized ep5out support: BULK, INT ISO
cdns-usb3 5b130000.cdns3: Initialized ep6out support: BULK, INT ISO
cdns-usb3 5b130000.cdns3: Initialized ep7out support: BULK, INT ISO
cdns-usb3 5b130000.cdns3: Initialized ep1in support: BULK, INT ISO
cdns-usb3 5b130000.cdns3: Initialized ep2in support: BULK, INT ISO
cdns-usb3 5b130000.cdns3: Initialized ep3in support: BULK, INT ISO
cdns-usb3 5b130000.cdns3: Initialized ep4in support: BULK, INT ISO
cdns-usb3 5b130000.cdns3: Initialized ep5in support: BULK, INT ISO
cdns-usb3 5b130000.cdns3: Initialized ep6in support: BULK, INT ISO
cdns-usb3 5b130000.cdns3: Initialized ep7in support: BULK, INT ISO
Reviewed-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
And delete cdsn3_hw_role_state_machine declare which doesn't
be needed.
Reviewed-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
In short, we have three kinds of role switches:
- Based on SoC: ID and VBUS
- Based on external connnctor, eg, Type-C or GPIO Connector
- Based on user choices through sysfs
Since HW handling and usb-role-switch handling are at
different places, we do not need role_override any more,
and this flag could not judge external connector case well.
With role_override deleted, We use cdns3_hw_role_switch for
the 1st use case, and usb-role-switch for the 2nd and 3rd cases.
Reviewed-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
After that, the role switch device (eg, Type-C device) could call
cdns3_role_set to finish the role switch.
Reviewed-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
If there are still pending requests because no TRB was available,
prepare more when started requests are completed.
Introduce dwc3_gadget_ep_should_continue() to check for incomplete and
pending requests to resume updating new TRBs to the controller's TRB
cache.
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Register vbus_draw to gadget ops and update corresponding vbus
draw current to usb_phy.
Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
When I switched on USB role switching for the tps6598x I completely forgot
to add the Kconfig dependency.
Ensure USB_ROLE_SWITCH is selected to prevent the typs6598x driver being
compiled in but the role-switch driver being compiled as a module, leading
to link error.
Suggested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20200520153617.610909-1-bryan.odonoghue@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function ehci_mxc_drv_probe() does not perform sufficient error
checking after executing platform_get_irq(), thus fix it.
Fixes: 7e8d5cd93f ("USB: Add EHCI support for MX27 and MX31 based boards")
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Reviewed-by: Peter Chen <peter.chen@nxp.com>
Link: https://lore.kernel.org/r/20200513132647.5456-1-tangbin@cmss.chinamobile.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The comparison of hcd->irq to less than zero for an error check will
never be true because hcd->irq is an unsigned int. Fix this by
assigning the int retval to the return of platform_get_irq and checking
this for the -ve error condition and assigning hcd->irq to retval.
Addresses-Coverity: ("Unsigned compared against 0")
Fixes: c856b4b0fd ("USB: EHCI: ehci-mv: fix error handling in mv_ehci_probe()")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20200515165453.104028-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When renesas module is not built, we get compiler warning on xhci driver
with W=1
CC [M] drivers/usb/host/xhci-rcar.o
drivers/usb/host/xhci-pci.h:13:5: warning: no previous prototype for ‘renesas_xhci_check_request_fw’ [-Wmissing-prototypes]
int renesas_xhci_check_request_fw(struct pci_dev *dev,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/usb/host/xhci-pci.h:19:6: warning: no previous prototype for ‘renesas_xhci_pci_exit’ [-Wmissing-prototypes]
void renesas_xhci_pci_exit(struct pci_dev *dev) { };
^~~~~~~~~~~~~~~~~~~~~
We have defined these symbols when CONFIG_USB_XHCI_PCI_RENESAS is not
defined, but missed making then static.
Reported-by: kbuild test robot <lkp@intel.com>
Fixes: 8bd5741e31 ("usb: renesas-xhci: Add the renesas xhci driver")
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200519093002.1152144-1-vkoul@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb_wwan_indat_callback() shouldn't resubmit rx urb if the previous urb
status is a fatal error. Or the usb controller would keep processing the
new urbs then run into interrupt storm, and has no chance to recover.
Fixes: 6c1ee66a0b ("USB-Serial: Fix error handling of usb_wwan")
Cc: stable@vger.kernel.org
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
The xhci-pci-renesas module exports symbols for xhci-pci to load the
RAM/ROM on renesas xhci controllers. We had dependency which works
when both the modules are builtin or modules.
But if xhci-pci is inbuilt and xhci-pci-renesas in module, we get below
linker error:
drivers/usb/host/xhci-pci.o: In function `xhci_pci_remove':
drivers/usb/host/xhci-pci.c:411: undefined reference to `renesas_xhci_pci_exit'
drivers/usb/host/xhci-pci.o: In function `xhci_pci_probe':
drivers/usb/host/xhci-pci.c:345: undefined reference to `renesas_xhci_check_request_fw'
Fix this by adding USB_XHCI_PCI having depends on USB_XHCI_PCI_RENESAS
|| !USB_XHCI_PCI_RENESAS so that both can be either inbuilt or modules.
Reported-by: Anders Roxell <anders.roxell@linaro.org>
Fixes: a66d21d7db ("usb: xhci: Add support for Renesas controller with memory")
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200519050622.994908-1-vkoul@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
get_unaligned_le16() is defined in linux/unaligned/access_ok.h header
but it uses symbols which may not be available, leading to build
failures on ia64. Using asm/unaligned.h seem to be the right thing
and used in other drivers.
This fixes below error reported by kbuild test robot
In file included from drivers/usb/host/xhci-pci-renesas.c:9:
>> include/linux/unaligned/access_ok.h:8:28: error: redefinition of 'get_unaligned_le16'
8 | static __always_inline u16 get_unaligned_le16(const void *p)
| ^~~~~~~~~~~~~~~~~~
In file included from arch/ia64/include/asm/unaligned.h:5,
from arch/ia64/include/asm/io.h:23,
from arch/ia64/include/asm/smp.h:21,
from include/linux/smp.h:67,
from include/linux/percpu.h:7,
from include/linux/arch_topology.h:9,
from include/linux/topology.h:30,
from include/linux/gfp.h:9,
from include/linux/xarray.h:14,
from include/linux/radix-tree.h:18,
from include/linux/idr.h:15,
from include/linux/kernfs.h:13,
from include/linux/sysfs.h:16,
from include/linux/kobject.h:20,
from include/linux/of.h:17,
from include/linux/irqdomain.h:35,
from include/linux/acpi.h:13,
from drivers/usb/host/xhci-pci-renesas.c:4:
include/linux/unaligned/le_struct.h:7:19: note: previous definition of 'get_unaligned_le16' was here
7 | static inline u16 get_unaligned_le16(const void *p)
| ^~~~~~~~~~~~~~~~~~
In file included from drivers/usb/host/xhci-pci-renesas.c:9:
include/linux/unaligned/access_ok.h:13:28: error: redefinition of 'get_unaligned_le32'
13 | static __always_inline u32 get_unaligned_le32(const void *p)
| ^~~~~~~~~~~~~~~~~~
In file included from arch/ia64/include/asm/unaligned.h:5,
from arch/ia64/include/asm/io.h:23,
from arch/ia64/include/asm/smp.h:21,
from include/linux/smp.h:67,
from include/linux/percpu.h:7,
from include/linux/arch_topology.h:9,
from include/linux/topology.h:30,
from include/linux/gfp.h:9,
from include/linux/xarray.h:14,
from include/linux/radix-tree.h:18,
from include/linux/idr.h:15,
from include/linux/kernfs.h:13,
from include/linux/sysfs.h:16,
from include/linux/kobject.h:20,
from include/linux/of.h:17,
from include/linux/irqdomain.h:35,
from include/linux/acpi.h:13,
from drivers/usb/host/xhci-pci-renesas.c:4:
include/linux/unaligned/le_struct.h:12:19: note: previous definition of 'get_unaligned_le32' was here
Fixes: 8bd5741e31 ("usb: renesas-xhci: Add the renesas xhci driver")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200516162516.385149-1-vkoul@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
uPD720201 supports ROM and allows software to program the ROM and boot
from it. Add support for detecting if ROM is present, if so load the ROM
if not programmed earlier.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200514122039.300417-5-vkoul@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some rensas controller like uPD720201 and uPD720202 need firmware to be
loaded. Add these devices in table and invoke renesas firmware loader
functions to check and load the firmware into device memory when
required.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200514122039.300417-4-vkoul@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This add a new driver for renesas xhci which is basically a firmware
loader for uPD720201 and uPD720202 w/o ROM. The xhci-pci driver will
invoke this driver for loading/unloading on relevant devices.
This patch adds a firmware loader for the uPD720201K8-711-BAC-A
and uPD720202K8-711-BAA-A variant. Both of these chips are listed
in Renesas' R19UH0078EJ0500 Rev.5.00 "User's Manual: Hardware" as
devices which need the firmware loader on page 2 in order to
work as they "do not support the External ROM".
The "Firmware Download Sequence" is describe in chapter
"7.1 FW Download Interface" R19UH0078EJ0500 Rev.5.00 page 131.
The firmware "K2013080.mem" is available from a USB3.0 Host to
PCIe Adapter (PP2U-E card) "Firmware download" archive. An
alternative version can be sourced from Netgear's WNDR4700 GPL
archives.
The release notes of the PP2U-E's "Firmware Download" ver 2.0.1.3
(2012-06-15) state that the firmware is for the following devices:
- uPD720201 ES 2.0 sample whose revision ID is 2.
- uPD720201 ES 2.1 sample & CS sample & Mass product, ID is 3.
- uPD720202 ES 2.0 sample & CS sample & Mass product, ID is 2.
[vkoul: fixed comments:
used macros for timeout count and delay
removed renesas_fw_alive_check
cleaned renesas_fw_callback
removed recursion for renesas_fw_download
add register defines and field names
move to a separate file
make fw loader as sync probe so that we execute in probe and
prevent race
make xhci-pci-renesas a seprate module]
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200514122039.300417-3-vkoul@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb_hcd_pci_probe expects users to call this with driver_data set as
hc_driver, that limits the possibility of using the driver_data for
driver data.
Add hc_driver as argument to usb_hcd_pci_probe and modify the callers
ehci/ohci/xhci/uhci to pass hc_driver as argument and freeup the
driver_data used
Tested xhci driver on Dragon-board RB3, compile tested ehci, ohci and
uhci.
[For all but the xHCI parts]
[For the xhci part]
Suggested-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200514122039.300417-2-vkoul@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
FuzzUSB (a variant of syzkaller) found an illegal array access
using an incorrect index while binding a gadget with UDC.
Reference: https://www.spinics.net/lists/linux-usb/msg194331.html
This bug occurs when a size variable used for a buffer
is misused to access its strcpy-ed buffer.
Given a buffer along with its size variable (taken from user input),
from which, a new buffer is created using kstrdup().
Due to the original buffer containing 0 value in the middle,
the size of the kstrdup-ed buffer becomes smaller than that of the original.
So accessing the kstrdup-ed buffer with the same size variable
triggers memory access violation.
The fix makes sure no zero value in the buffer,
by comparing the strlen() of the orignal buffer with the size variable,
so that the access to the kstrdup-ed buffer is safe.
BUG: KASAN: slab-out-of-bounds in gadget_dev_desc_UDC_store+0x1ba/0x200
drivers/usb/gadget/configfs.c:266
Read of size 1 at addr ffff88806a55dd7e by task syz-executor.0/17208
CPU: 2 PID: 17208 Comm: syz-executor.0 Not tainted 5.6.8 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xce/0x128 lib/dump_stack.c:118
print_address_description.constprop.4+0x21/0x3c0 mm/kasan/report.c:374
__kasan_report+0x131/0x1b0 mm/kasan/report.c:506
kasan_report+0x12/0x20 mm/kasan/common.c:641
__asan_report_load1_noabort+0x14/0x20 mm/kasan/generic_report.c:132
gadget_dev_desc_UDC_store+0x1ba/0x200 drivers/usb/gadget/configfs.c:266
flush_write_buffer fs/configfs/file.c:251 [inline]
configfs_write_file+0x2f1/0x4c0 fs/configfs/file.c:283
__vfs_write+0x85/0x110 fs/read_write.c:494
vfs_write+0x1cd/0x510 fs/read_write.c:558
ksys_write+0x18a/0x220 fs/read_write.c:611
__do_sys_write fs/read_write.c:623 [inline]
__se_sys_write fs/read_write.c:620 [inline]
__x64_sys_write+0x73/0xb0 fs/read_write.c:620
do_syscall_64+0x9e/0x510 arch/x86/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Signed-off-by: Kyungtae Kim <kt0755@gmail.com>
Reported-and-tested-by: Kyungtae Kim <kt0755@gmail.com>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200510054326.GA19198@pizza01
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The main part here are the important fixes for the raw-gadget before it
becomes an ABI. We're adding support for stall/halt/wedge which is
actually pretty important in many situations. There's also a NULL
pointer deref fix.
Apart from raw-gadget, I've included some recent sparse fixes to a few
drivers.
Signed-off-by: Felipe Balbi <balbi@kernel.org>
-----BEGIN PGP SIGNATURE-----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=0P11
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-v5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus
Felipe writes:
USB: fixes for v5.7-rc6
The main part here are the important fixes for the raw-gadget before it
becomes an ABI. We're adding support for stall/halt/wedge which is
actually pretty important in many situations. There's also a NULL
pointer deref fix.
Apart from raw-gadget, I've included some recent sparse fixes to a few
drivers.
Signed-off-by: Felipe Balbi <balbi@kernel.org>
* tag 'fixes-for-v5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb:
usb: cdns3: gadget: make a bunch of functions static
usb: mtu3: constify struct debugfs_reg32
usb: gadget: udc: atmel: Make some symbols static
usb: raw-gadget: fix null-ptr-deref when reenabling endpoints
usb: raw-gadget: documentation updates
usb: raw-gadget: support stalling/halting/wedging endpoints
usb: raw-gadget: fix gadget endpoint selection
usb: raw-gadget: improve uapi headers comments
In commit 2bef9aed6f ("usb: usbfs: correct kernel->user page attribute
mismatch") we switched from always calling remap_pfn_range() to call
dma_mmap_coherent() to handle issues with systems with non-coherent USB host
controller drivers. Unfortunatly, as syzbot quickly told us, not all the world
is host controllers with DMA support, so we need to check what host controller
we are attempting to talk to before doing this type of allocation.
Thanks to Christoph for the quick idea of how to fix this.
Fixes: 2bef9aed6f ("usb: usbfs: correct kernel->user page attribute mismatch")
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jeremy Linton <jeremy.linton@arm.com>
Cc: stable <stable@vger.kernel.org>
Reported-by: syzbot+353be47c9ce21b68b7ed@syzkaller.appspotmail.com
Reviewed-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20200514112711.1858252-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On platforms with IOMMU enabled, multiple SGs can be coalesced into one
by the IOMMU driver. In that case the SG list processing as part of the
completion of a urb on a bulk endpoint can result into a NULL pointer
dereference with the below stack dump.
<6> Unable to handle kernel NULL pointer dereference at virtual address 0000000c
<6> pgd = c0004000
<6> [0000000c] *pgd=00000000
<6> Internal error: Oops: 5 [#1] PREEMPT SMP ARM
<2> PC is at xhci_queue_bulk_tx+0x454/0x80c
<2> LR is at xhci_queue_bulk_tx+0x44c/0x80c
<2> pc : [<c08907c4>] lr : [<c08907bc>] psr: 000000d3
<2> sp : ca337c80 ip : 00000000 fp : ffffffff
<2> r10: 00000000 r9 : 50037000 r8 : 00004000
<2> r7 : 00000000 r6 : 00004000 r5 : 00000000 r4 : 00000000
<2> r3 : 00000000 r2 : 00000082 r1 : c2c1a200 r0 : 00000000
<2> Flags: nzcv IRQs off FIQs off Mode SVC_32 ISA ARM Segment none
<2> Control: 10c0383d Table: b412c06a DAC: 00000051
<6> Process usb-storage (pid: 5961, stack limit = 0xca336210)
<snip>
<2> [<c08907c4>] (xhci_queue_bulk_tx)
<2> [<c0881b3c>] (xhci_urb_enqueue)
<2> [<c0831068>] (usb_hcd_submit_urb)
<2> [<c08350b4>] (usb_sg_wait)
<2> [<c089f384>] (usb_stor_bulk_transfer_sglist)
<2> [<c089f2c0>] (usb_stor_bulk_srb)
<2> [<c089fe38>] (usb_stor_Bulk_transport)
<2> [<c089f468>] (usb_stor_invoke_transport)
<2> [<c08a11b4>] (usb_stor_control_thread)
<2> [<c014a534>] (kthread)
The above NULL pointer dereference is the result of block_len and the
sent_len set to zero after the first SG of the list when IOMMU driver
is enabled. Because of this the loop of processing the SGs has run
more than num_sgs which resulted in a sg_next on the last SG of the
list which has SG_END set.
Fix this by check for the sg before any attributes of the sg are
accessed.
[modified reason for null pointer dereference in commit message subject -Mathias]
Fixes: f9c589e142 ("xhci: TD-fragment, align the unsplittable case with a bounce buffer")
Cc: stable@vger.kernel.org
Signed-off-by: Sriharsha Allenki <sallenki@codeaurora.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200514110432.25564-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the following sparse warning:
drivers/usb/cdns3/gadget.c:85:6: warning: symbol
'cdns3_clear_register_bit' was not declared. Should it be static?
drivers/usb/cdns3/gadget.c:140:26: warning: symbol
'cdns3_next_align_buf' was not declared. Should it be static?
drivers/usb/cdns3/gadget.c:151:22: warning: symbol
'cdns3_next_priv_request' was not declared. Should it be static?
drivers/usb/cdns3/gadget.c:193:5: warning: symbol 'cdns3_ring_size' was
not declared. Should it be static?
drivers/usb/cdns3/gadget.c:348:6: warning: symbol
'cdns3_move_deq_to_next_trb' was not declared. Should it be static?
drivers/usb/cdns3/gadget.c:514:20: warning: symbol
'cdns3_wa2_gadget_giveback' was not declared. Should it be static?
drivers/usb/cdns3/gadget.c:554:5: warning: symbol
'cdns3_wa2_gadget_ep_queue' was not declared. Should it be static?
drivers/usb/cdns3/gadget.c:839:6: warning: symbol
'cdns3_wa1_restore_cycle_bit' was not declared. Should it be static?
drivers/usb/cdns3/gadget.c:1907:6: warning: symbol
'cdns3_stream_ep_reconfig' was not declared. Should it be static?
drivers/usb/cdns3/gadget.c:1928:6: warning: symbol
'cdns3_configure_dmult' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
mtu3_prb_regs is never changed and can therefore be made const.
This allows the compiler to put it in the text section instead of the
data section.
Before:
text data bss dec hex filename
19966 7120 0 27086 69ce drivers/usb/mtu3/mtu3_debugfs.o
After:
text data bss dec hex filename
20142 6992 0 27134 69fe drivers/usb/mtu3/mtu3_debugfs.o
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Fix the following sparse warnings:
drivers/usb/gadget/udc/atmel_usba_udc.c:188:30: warning: symbol 'queue_dbg_fops' was not declared.
drivers/usb/gadget/udc/atmel_usba_udc.c:196:30: warning: symbol 'regs_dbg_fops' was not declared.
queue_dbg_fops and regs_dbg_fops have only call within atmel_usba_udc.c
They should be static
Fixes: 914a3f3b37 ("USB: add atmel_usba_udc driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Samuel Zou <zou_wei@huawei.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Currently we preassign gadget endpoints to raw-gadget endpoints during
initialization. Fix resetting this assignment in raw_ioctl_ep_disable(),
otherwise we will get null-ptr-derefs when an endpoint is reenabled.
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Raw Gadget is currently unable to stall/halt/wedge gadget endpoints,
which is required for proper emulation of certain USB classes.
This patch adds a few more ioctls:
- USB_RAW_IOCTL_EP0_STALL allows to stall control endpoint #0 when
there's a pending setup request for it.
- USB_RAW_IOCTL_SET/CLEAR_HALT/WEDGE allow to set/clear halt/wedge status
on non-control non-isochronous endpoints.
Fixes: f2c2e71764 ("usb: gadget: add raw-gadget interface")
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Currently automatic gadget endpoint selection based on required features
doesn't work. Raw Gadget tries iterating over the list of available
endpoints and finding one that has the right direction and transfer type.
Unfortunately selecting arbitrary gadget endpoints (even if they satisfy
feature requirements) doesn't work, as (depending on the UDC driver) they
might have fixed addresses, and one also needs to provide matching
endpoint addresses in the descriptors sent to the host.
The composite framework deals with this by assigning endpoint addresses
in usb_ep_autoconfig() before enumeration starts. This approach won't work
with Raw Gadget as the endpoints are supposed to be enabled after a
set_configuration/set_interface request from the host, so it's too late to
patch the endpoint descriptors that had already been sent to the host.
For Raw Gadget we take another approach. Similarly to GadgetFS, we allow
the user to make the decision as to which gadget endpoints to use.
This patch adds another Raw Gadget ioctl USB_RAW_IOCTL_EPS_INFO that
exposes information about all non-control endpoints that a currently
connected UDC has. This information includes endpoints addresses, as well
as their capabilities and limits to allow the user to choose the most
fitting gadget endpoint.
The USB_RAW_IOCTL_EP_ENABLE ioctl is updated to use the proper endpoint
validation routine usb_gadget_ep_match_desc().
These changes affect the portability of the gadgets that use Raw Gadget
when running on different UDCs. Nevertheless, as long as the user relies
on the information provided by USB_RAW_IOCTL_EPS_INFO to dynamically
choose endpoint addresses, UDC-agnostic gadgets can still be written with
Raw Gadget.
Fixes: f2c2e71764 ("usb: gadget: add raw-gadget interface")
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
According to the PMC Type C Subsystem (TCSS) Mux programming guide rev
0.6, the PMC HPD request LVL bit field is bit 4.
Fix the definition here to match the programming guide.
Since this bit field is changing, explicitly define a field for the
HPD_HIGH mode data bit.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Fixes: 6701adfa96 ("usb: typec: driver for Intel PMC mux control")
Reviewed-by: Benson Leung <bleung@chromium.org>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20200511091837.102508-1-pmalani@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add the build system changes needed to get the Broadcom STB XHCI,
EHCI and OHCI functionality working. The OHCI support does not
require anything unique to Broadcom so the standard ohci-platform
driver is being used. Also update MAINTAINERS.
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20200512150019.25903-6-alcooperx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a new EHCI driver for Broadcom STB SoC's. A new EHCI driver
was created instead of adding support to the existing ehci platform
driver because of the code required to work around bugs in the EHCI
controller. The primary workaround is for a bug where the Core
violates the SOF interval between the first two SOFs transmitted after
resume. This only happens if the resume occurs near the end of a
microframe. The fix is to intercept the ehci-hcd request to complete
RESUME and align it to the start of the next microframe.
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20200512150019.25903-5-alcooperx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for Broadcom STB SoC's to the xhci platform driver
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20200512150019.25903-4-alcooperx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds USB role switch support to the tps6598x.
The setup to initiate or accept a data-role switch is both assumed and
currently required to be baked-into the firmware as described in TI's
document here.
Link: https://www.ti.com/lit/an/slva843a/slva843a.pdf
With this change its possible to use the USB role-switch API to detect and
notify role-switches to downstream consumers.
Tested with a ChipIdea controller on a Qualcomm MSM8939.
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Nikolaus Voss <nikolaus.voss@loewensteinmedical.de>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Gustavo A. R. Silva <garsilva@embeddedor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: linux-usb@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20200511231930.2825183-2-bryan.odonoghue@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The SBU and HSL orientation may be fixed/static from the mux
PoW. Apparently the retimer may take care of the orientation
of these lines. Handling the static SBU (AUX) and HSL
orientation with device properties.
If the SBU orientation is static, a device property
"sbu-orintation" can be used. When the property exists, the
driver always sets the SBU orientation according to the
property value, and when it's not set, the driver uses the
cable plug orientation with SBU.
And with static HSL orientation, "hsl-orientation" device
property can be used in the same way.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20200507150900.12102-3-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Right now we don't report to user-space a role switch when doing a
usb_role_switch_set_role() despite having registered the uevent callbacks.
This patch switches on the notifications allowing user-space to see
role-switch change notifications and subsequently determine the current
controller data-role.
example:
PFX=/devices/platform/soc/78d9000.usb/ci_hdrc.0
root@somebox# udevadm monitor -p
KERNEL[49.894994] change $PFX/usb_role/ci_hdrc.0-role-switch (usb_role)
ACTION=change
DEVPATH=$PFX/usb_role/ci_hdrc.0-role-switch
SUBSYSTEM=usb_role
DEVTYPE=usb_role_switch
USB_ROLE_SWITCH=ci_hdrc.0-role-switch
SEQNUM=2432
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Chunfeng Yun <chunfeng.yun@mediatek.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Wen Yang <wenyang@linux.alibaba.com>
Cc: chenqiwu <chenqiwu@xiaomi.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20200508162937.2566818-1-bryan.odonoghue@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: 7d9e6f5aeb ("usb: host: ohci-sm501: init genalloc for local memory")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20200506135625.106910-1-weiyongjun1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the function platform_get_irq() failed, the negative value
returned will not be detected here. So fix error handling in
mv_ehci_probe(). And when get irq failed, the function
platform_get_irq() logs an error message, so remove redundant
message here.
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20200508114305.15740-1-tangbin@cmss.chinamobile.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Delete unused initialized value, because 'retval' will be assigined
by the function mv_ehci_enable(). And delete the extra blank lines.
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20200508142136.4232-1-tangbin@cmss.chinamobile.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the defined variable "dev" to make the code cleaner. And
delete an extra blank line.
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20200508144024.7836-1-tangbin@cmss.chinamobile.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
scsi_get_host_dev() will create a virtual device such that either
the target id is ignored from scanning (if 'this_id' is set to
something which can be reached during scanning) or if the driver
needs a scsi device for the HBA to send commands to.
Neither is true for sierra-ms; 'this_id' remains at the default
value '-1' and the created device is never ever used within
the driver.
So kill it.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20200505143019.57418-1-hare@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On the Raspberry Pi 4, after a PCI reset, VL805's firmware may either be
loaded directly from an EEPROM or, if not present, by the SoC's
VideoCore. Inform VideoCore that VL805 was just reset.
Also, as this creates a dependency between USB_PCI and VideoCore's
firmware interface, and since USB_PCI can't be set as a module neither
this can. Reflect that on the firmware interface Kconfg.
Link: https://lore.kernel.org/r/20200505161318.26200-5-nsaenzjulienne@suse.de
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
They must return the number of bytes transferred during the data stage.
Fixes: 068fbff4f8 ("usb: raw-gadget: Fix copy_to/from_user() checks")
Fixes: f2c2e71764 ("usb: gadget: add raw-gadget interface")
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Calling into the role switch API requires that these functions
are loaded, if they are in a loadable module and dwc3 itself
is built-in, this produces a link error:
drivers/usb/dwc3/drd.o: In function `dwc3_usb_role_switch_get':
drd.c:(.text+0x26): undefined reference to `usb_role_switch_get_drvdata'
drivers/usb/dwc3/drd.o: In function `dwc3_usb_role_switch_set':
drd.c:(.text+0x97): undefined reference to `usb_role_switch_get_drvdata'
drivers/usb/dwc3/drd.o: In function `dwc3_drd_init':
drd.c:(.text+0x1ca7): undefined reference to `usb_role_switch_register'
drivers/usb/dwc3/drd.o: In function `dwc3_drd_exit':
drd.c:(.text+0x1e92): undefined reference to `usb_role_switch_unregister'
Select the USB_ROLE_SWITCH symbol from dwc3 in that configuration.
Fixes: 0339f7fbc8 ("usb: dwc3: fix up for role switch API change")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
If 'usb_otg_descriptor_alloc()' fails, we must return a
negative error code -ENOMEM, not 0.
Fixes: 1156e91dd7 ("usb: gadget: ncm: allocate and init otg descriptor by otg capabilities")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
If 'usb_otg_descriptor_alloc()' fails, we must return a
negative error code -ENOMEM, not 0.
Fixes: ab6796ae98 ("usb: gadget: cdc2: allocate and init otg descriptor by otg capabilities")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Fix the following cppcheck warnings:
drivers/usb/gadget/legacy/inode.c:1364:8: style: Redundant initialization for 'value'. The initialized value is overwritten$
value = -EOPNOTSUPP;
^
drivers/usb/gadget/legacy/inode.c:1331:15: note: value is initialized
int value = -EOPNOTSUPP;
^
drivers/usb/gadget/legacy/inode.c:1364:8: note: value is overwritten
value = -EOPNOTSUPP;
^
drivers/usb/gadget/legacy/inode.c:1817:8: style: Redundant initialization for 'value'. The initialized value is overwritten$
value = -EINVAL;
^
drivers/usb/gadget/legacy/inode.c:1787:18: note: value is initialized
ssize_t value = len, length = len;
^
drivers/usb/gadget/legacy/inode.c:1817:8: note: value is overwritten
value = -EINVAL;
^
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
When the XUDC device is idle (i.e. powergated), care must be taken not
to access any registers because that would lead to a crash.
Move the call to tegra_xudc_device_mode_off() into the same conditional
as the tegra_xudc_powergate() call to make sure we only force device
mode off if the XUDC is actually powered up.
Fixes: 49db427232 ("usb: gadget: Add UDC driver for tegra XUSB device mode controller")
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
'dev' is allocated in 'net2272_probe_init()'. It must be freed in the error
handling path, as already done in the remove function (i.e.
'net2272_plat_remove()')
Fixes: 90fccb529d ("usb: gadget: Gadget directory cleanup - group UDC drivers")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
A call to 'regulator_get()' is hidden in 'twl6030_usb_ldo_init()'. A
corresponding put must be performed in the error handling path, as
already done in the remove function.
While at it, also move a 'free_irq()' call in the error handling path in
order to be consistent.
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
If 'usb_otg_descriptor_alloc()' fails, we must return an error code, not 0.
Fixes: 56023ce0fd ("usb: gadget: audio: allocate and init otg descriptor by otg capabilities")
Reviewed-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Intel Merrifield provides a DR support via PMIC which has its own
extcon driver.
Add a property string to link to that driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
The check for the HWO flag in dwc3_gadget_ep_reclaim_trb_sg()
causes us to break out of the loop before we call
dwc3_gadget_ep_reclaim_completed_trb(), which is what likely
should be clearing the HWO flag.
This can cause odd behavior where we never reclaim all the trbs
in the sg list, so we never call giveback on a usb req, and that
will causes transfer stalls.
This effectively resovles the adb stalls seen on HiKey960
after userland changes started only using AIO in adbd.
Cc: YongQin Liu <yongqin.liu@linaro.org>
Cc: Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com>
Cc: Yang Fei <fei.yang@intel.com>
Cc: Thinh Nguyen <thinhn@synopsys.com>
Cc: Tejas Joglekar <tejas.joglekar@synopsys.com>
Cc: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Cc: Jack Pham <jackp@codeaurora.org>
Cc: Josh Gao <jmgao@google.com>
Cc: Todd Kjos <tkjos@google.com>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Cc: stable@vger.kernel.org #4.20+
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Currently we check to make sure there is no error state on the extcon
handle for VBUS when writing to the HS_PHY_GENCONFIG_2 register. When using
the USB role-switch API we still need to write to this register absent an
extcon handle.
This patch makes the appropriate update to ensure the write happens if
role-switching is true.
Fixes: 05559f10ed ("usb: chipidea: add role switch class support")
Cc: stable <stable@vger.kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: linux-usb@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Link: https://lore.kernel.org/r/20200507004918.25975-2-peter.chen@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here's a fix adding a missing input sanity check and a new modem device
id.
Both have been in linux-next with no reported issues.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCXrLNGgAKCRALxc3C7H1l
CL9cAQDKplqMiVKST+Zmkj4tWjNT1cyCaUd0Ph5A6G5c3mp9KAD9FVmA8hs2ZJCe
5EbgjBaQaKcoRCTb+Gu2OZxX3AIt3ww=
=0Lm7
-----END PGP SIGNATURE-----
Merge tag 'usb-serial-5.7-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial fixes for 5.7-rc5
Here's a fix adding a missing input sanity check and a new modem device
id.
Both have been in linux-next with no reported issues.
* tag 'usb-serial-5.7-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: qcserial: Add DW5816e support
USB: serial: garmin_gps: add sanity checking for data length
The flag provided by the USB role-switch logic allow_userspace_control
allows user-space to trigger a role-switch. Several other USB controller
drivers already enable this feature. Let's switch it on for the chipidea
core now also.
Cc: Peter Chen <Peter.Chen@nxp.com>
Cc: Jun Li <jun.li@nxp.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: linux-usb@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
imx7ulp uses different USB PHY with imx7d (MXS PHY vs PICO PHY), so the
features are supported by non-core register are a little different.
For example, autoresume feature is supported by all controllers for
imx7ulp, but for imx7d, it is only supported by non-HSIC controller.
Besides, these two platforms use different HSIC controller, imx7ulp
needs software operation, but imx7d doesn't.
Signed-off-by: Peter Chen <peter.chen@nxp.com>
The bootloader may use device mode, and keep dp up. We need dp
to be pulled down before possbile charger detection operation.
Signed-off-by: Peter Chen <peter.chen@nxp.com>
imx7d (and imx8mm, imx8mn) uses Samsung PHY and USB generic PHY driver.
The USB generic PHY driver is impossible to have a charger detection
for every user, so we implement USB charger detection routine at glue
layer. After the detection has finished, it will notify USB PHY
charger framework, and the uevents will be triggered.
Signed-off-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Some vendors glue layer need to handle some events for vbus, eg,
some i.mx platforms (imx7d, imx8mm, imx8mn, etc) needs vbus event
to handle charger detection, its charger detection is finished at
glue layer code, but not at USB PHY driver.
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Thinh Nguyen