mirror of https://gitee.com/openkylin/linux.git
32328 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Linus Torvalds
|
f3cc24942e |
Two fixes for the irq core code which are follow ups to the recent MSI
fixes:
- The WARN_ON which was put into the MSI setaffinity callback for paranoia
reasons actually triggered via a callchain which escaped when all the
possible ways to reach that code were analyzed.
The proc/irq/$N/*affinity interfaces have a quirk which came in when
ALPHA moved to the generic interface: In case that the written affinity
mask does not contain any online CPU it calls into ALPHAs magic auto
affinity setting code.
A few years later this mechanism was also made available to x86 for no
good reasons and in a way which circumvents all sanity checks for
interrupts which cannot have their affinity set from process context on
X86 due to the way the X86 interrupt delivery works.
It would be possible to make this work properly, but there is no point
in doing so. If the interrupt is not yet started then the affinity
setting has no effect and if it is started already then it is already
assigned to an online CPU so there is no point to randomly move it to
some other CPU. Just return EINVAL as the code has done before that
change forever.
- The new MSI quirk bit in the irq domain flags turned out to be already
occupied, which escaped the author and the reviewers because the already
in use bits were 0,6,2,3,4,5 listed in that order. That bit 6 was simply
overlooked because the ordering was straight forward linear
otherwise. So the new bit ended up being a duplicate. Fix it up by
switching the oddball 6 to the obvious 1.
-----BEGIN PGP SIGNATURE-----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=jvVI
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2020-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"Two fixes for the irq core code which are follow ups to the recent MSI
fixes:
- The WARN_ON which was put into the MSI setaffinity callback for
paranoia reasons actually triggered via a callchain which escaped
when all the possible ways to reach that code were analyzed.
The proc/irq/$N/*affinity interfaces have a quirk which came in
when ALPHA moved to the generic interface: In case that the written
affinity mask does not contain any online CPU it calls into ALPHAs
magic auto affinity setting code.
A few years later this mechanism was also made available to x86 for
no good reasons and in a way which circumvents all sanity checks
for interrupts which cannot have their affinity set from process
context on X86 due to the way the X86 interrupt delivery works.
It would be possible to make this work properly, but there is no
point in doing so. If the interrupt is not yet started then the
affinity setting has no effect and if it is started already then it
is already assigned to an online CPU so there is no point to
randomly move it to some other CPU. Just return EINVAL as the code
has done before that change forever.
- The new MSI quirk bit in the irq domain flags turned out to be
already occupied, which escaped the author and the reviewers
because the already in use bits were 0,6,2,3,4,5 listed in that
order.
That bit 6 was simply overlooked because the ordering was straight
forward linear otherwise. So the new bit ended up being a
duplicate.
Fix it up by switching the oddball 6 to the obvious 1"
* tag 'irq-urgent-2020-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/irqdomain: Make sure all irq domain flags are distinct
genirq/proc: Reject invalid affinity masks (again)
|
|
|
Linus Torvalds
|
591dd4c101 |
s390 updates for 5.6-rc3
- Remove ieee_emulation_warnings sysctl which is a dead code. - Avoid triggering rebuild of the kernel during make install. - Enable protected virtualization guest support in default configs. - Fix cio_ignore seq_file .next function to increase position index. And use kobj_to_dev instead of container_of in cio code. - Fix storage block address lists to contain absolute addresses in qdio code. - Few clang warnings and spelling fixes. -----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAl5RI0sACgkQjYWKoQLX FBig0Af/bJjFspbGFN+YEO+XM3AbURu0lHxq25r0EoSEc9acfS5nMrUk7OhNktND w+m/PoyOg8elB3LDkalz9IP6CZANSSoGV5aKyg3Wp06Wu//DdwAMJWqFOyosJ89z zVOSGgX3zHFarodS4suDPTEdDEcSMVVvqnz1A81dQD9QNWyVCutqYABj3OEittOD EBYchT7Qs/ObwbP+RaUa0swbrq11P8hZSAblbjkbuFpw45CdQ6rFoyJO1Tccuyh7 puNlPLpkDI15RNxC+vh+4NItcxPcIL+Qa0kltbQJLq7aq/UqLNF02vLjWluH4hG6 i6+ZzsIra5gdtdf2cPFiKo7EagpQ2w== =CRBt -----END PGP SIGNATURE----- Merge tag 's390-5.6-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Vasily Gorbik: - Remove ieee_emulation_warnings sysctl which is a dead code. - Avoid triggering rebuild of the kernel during make install. - Enable protected virtualization guest support in default configs. - Fix cio_ignore seq_file .next function to increase position index. And use kobj_to_dev instead of container_of in cio code. - Fix storage block address lists to contain absolute addresses in qdio code. - Few clang warnings and spelling fixes. * tag 's390-5.6-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/qdio: fill SBALEs with absolute addresses s390/qdio: fill SL with absolute addresses s390: remove obsolete ieee_emulation_warnings s390: make 'install' not depend on vmlinux s390/kaslr: Fix casts in get_random s390/mm: Explicitly compare PAGE_DEFAULT_KEY against zero in storage_key_init_range s390/pkey/zcrypt: spelling s/crytp/crypt/ s390/cio: use kobj_to_dev() API s390/defconfig: enable CONFIG_PROTECTED_VIRTUALIZATION_GUEST s390/cio: cio_ignore_proc_seq_next should increase position index |
|
|
Linus Torvalds
|
3dc55dba67 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from David Miller:
1) Limit xt_hashlimit hash table size to avoid OOM or hung tasks, from
Cong Wang.
2) Fix deadlock in xsk by publishing global consumer pointers when NAPI
is finished, from Magnus Karlsson.
3) Set table field properly to RT_TABLE_COMPAT when necessary, from
Jethro Beekman.
4) NLA_STRING attributes are not necessary NULL terminated, deal wiht
that in IFLA_ALT_IFNAME. From Eric Dumazet.
5) Fix checksum handling in atlantic driver, from Dmitry Bezrukov.
6) Handle mtu==0 devices properly in wireguard, from Jason A.
Donenfeld.
7) Fix several lockdep warnings in bonding, from Taehee Yoo.
8) Fix cls_flower port blocking, from Jason Baron.
9) Sanitize internal map names in libbpf, from Toke Høiland-Jørgensen.
10) Fix RDMA race in qede driver, from Michal Kalderon.
11) Fix several false lockdep warnings by adding conditions to
list_for_each_entry_rcu(), from Madhuparna Bhowmik.
12) Fix sleep in atomic in mlx5 driver, from Huy Nguyen.
13) Fix potential deadlock in bpf_map_do_batch(), from Yonghong Song.
14) Hey, variables declared in switch statement before any case
statements are not initialized. I learn something every day. Get
rids of this stuff in several parts of the networking, from Kees
Cook.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (99 commits)
bnxt_en: Issue PCIe FLR in kdump kernel to cleanup pending DMAs.
bnxt_en: Improve device shutdown method.
net: netlink: cap max groups which will be considered in netlink_bind()
net: thunderx: workaround BGX TX Underflow issue
ionic: fix fw_status read
net: disable BRIDGE_NETFILTER by default
net: macb: Properly handle phylink on at91rm9200
s390/qeth: fix off-by-one in RX copybreak check
s390/qeth: don't warn for napi with 0 budget
s390/qeth: vnicc Fix EOPNOTSUPP precedence
openvswitch: Distribute switch variables for initialization
net: ip6_gre: Distribute switch variables for initialization
net: core: Distribute switch variables for initialization
udp: rehash on disconnect
net/tls: Fix to avoid gettig invalid tls record
bpf: Fix a potential deadlock with bpf_map_do_batch
bpf: Do not grab the bucket spinlock by default on htab batch ops
ice: Wait for VF to be reset/ready before configuration
ice: Don't tell the OS that link is going down
ice: Don't reject odd values of usecs set by user
...
|
|
|
Arnd Bergmann
|
412c53a680 |
y2038: remove unused time32 interfaces
No users remain, so kill these off before we grow new ones. Link: http://lkml.kernel.org/r/20200110154232.4104492-3-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Deepa Dinamani <deepa.kernel@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
David S. Miller
|
41f57cfde1 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Alexei Starovoitov says: ==================== pull-request: bpf 2020-02-19 The following pull-request contains BPF updates for your *net* tree. We've added 10 non-merge commits during the last 10 day(s) which contain a total of 10 files changed, 93 insertions(+), 31 deletions(-). The main changes are: 1) batched bpf hashtab fixes from Brian and Yonghong. 2) various selftests and libbpf fixes. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> |
|
|
Yonghong Song
|
b9aff38de2 |
bpf: Fix a potential deadlock with bpf_map_do_batch
Commit |
|
|
Brian Vazquez
|
492e0d0d6f |
bpf: Do not grab the bucket spinlock by default on htab batch ops
Grabbing the spinlock for every bucket even if it's empty, was causing
significant perfomance cost when traversing htab maps that have only a
few entries. This patch addresses the issue by checking first the
bucket_cnt, if the bucket has some entries then we go and grab the
spinlock and proceed with the batching.
Tested with a htab of size 50K and different value of populated entries.
Before:
Benchmark Time(ns) CPU(ns)
---------------------------------------------
BM_DumpHashMap/1 2759655 2752033
BM_DumpHashMap/10 2933722 2930825
BM_DumpHashMap/200 3171680 3170265
BM_DumpHashMap/500 3639607 3635511
BM_DumpHashMap/1000 4369008 4364981
BM_DumpHashMap/5k 11171919 11134028
BM_DumpHashMap/20k 69150080 69033496
BM_DumpHashMap/39k 190501036 190226162
After:
Benchmark Time(ns) CPU(ns)
---------------------------------------------
BM_DumpHashMap/1 202707 200109
BM_DumpHashMap/10 213441 210569
BM_DumpHashMap/200 478641 472350
BM_DumpHashMap/500 980061 967102
BM_DumpHashMap/1000 1863835 1839575
BM_DumpHashMap/5k 8961836 8902540
BM_DumpHashMap/20k 69761497 69322756
BM_DumpHashMap/39k 187437830 186551111
Fixes:
|
|
|
Stephen Kitt
|
140588bfed |
s390: remove obsolete ieee_emulation_warnings
s390 math emulation was removed with commit
|
|
|
Linus Torvalds
|
0a44cac810 |
dma-mapping fixes for 5.6
- give command line cma= precedence over the CONFIG_ option
(Nicolas Saenz Julienne)
- always allow 32-bit DMA, even for weirdly placed ZONE_DMA
- improve the debug printks when memory is not addressable, to help
find problems with swiotlb initialization
-----BEGIN PGP SIGNATURE-----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=NfNc
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.6' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
- give command line cma= precedence over the CONFIG_ option (Nicolas
Saenz Julienne)
- always allow 32-bit DMA, even for weirdly placed ZONE_DMA
- improve the debug printks when memory is not addressable, to help
find problems with swiotlb initialization
* tag 'dma-mapping-5.6' of git://git.infradead.org/users/hch/dma-mapping:
dma-direct: improve DMA mask overflow reporting
dma-direct: improve swiotlb error reporting
dma-direct: relax addressability checks in dma_direct_supported
dma-contiguous: CMA: give precedence to cmdline
|
|
|
Johannes Krude
|
e20d3a055a |
bpf, offload: Replace bitwise AND by logical AND in bpf_prog_offload_info_fill
This if guards whether user-space wants a copy of the offload-jited
bytecode and whether this bytecode exists. By erroneously doing a bitwise
AND instead of a logical AND on user- and kernel-space buffer-size can lead
to no data being copied to user-space especially when user-space size is a
power of two and bigger then the kernel-space buffer.
Fixes:
|
|
|
Linus Torvalds
|
ef78e5b7de |
Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Misc fixes all over the place:
- Fix NUMA over-balancing between lightly loaded nodes. This is
fallout of the big load-balancer rewrite.
- Fix the NOHZ remote loadavg update logic, which fixes anomalies
like reported 150 loadavg on mostly idle CPUs.
- Fix XFS performance/scalability
- Fix throttled groups unbound task-execution bug
- Fix PSI procfs boundary condition
- Fix the cpu.uclamp.{min,max} cgroup configuration write checks
- Fix DocBook annotations
- Fix RCU annotations
- Fix overly CPU-intensive housekeeper CPU logic loop on large CPU
counts"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix kernel-doc warning in attach_entity_load_avg()
sched/core: Annotate curr pointer in rq with __rcu
sched/psi: Fix OOB write when writing 0 bytes to PSI files
sched/fair: Allow a per-CPU kthread waking a task to stack on the same CPU, to fix XFS performance regression
sched/fair: Prevent unlimited runtime on throttled group
sched/nohz: Optimize get_nohz_timer_target()
sched/uclamp: Reject negative values in cpu_uclamp_write()
sched/fair: Allow a small load imbalance between low utilisation SD_NUMA domains
timers/nohz: Update NOHZ load in remote tick
sched/core: Don't skip remote tick for idle CPUs
|
|
|
Linus Torvalds
|
4e03e4e6d2 |
Power management fixes for 5.6-rc2
Fix three issues related to the handling of wakeup events signaled through the ACPI SCI while suspended to idle (Rafael Wysocki) and unexport an internal cpufreq variable (Yangtao Li). -----BEGIN PGP SIGNATURE----- iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAl5GbaoSHHJqd0Byand5 c29ja2kubmV0AAoJEILEb/54YlRxwHYP/iINPkW3IErX3TulA/2U+JjAK8TBsjl6 TY602el2noTddiUTvwf6AZ0N9B8QyPDLd66iC2/hGLIrM+Tg1Jd3/cZ5pwI79CYg NV7+kzW/39mscPpH/aPd5KRDXssQ2HRjBDv+GgwPsJxoycKDdppuOXDHzu87/57f oteVtP8VGwvMayZIi9d4tYO1x2vYtqd7QJioj7Ob3xMMWABjeMsputRkOzGaQfOB jOfgpWmPIePSjg6F4gGPRKgVzQmoeZvibtRLyaBe+s9go4vhKW+/X8XCoBM8ZNAM edKp8Z0FSv005GtbCcq2bukZTO4eE1KN/vFTOSzqmjuojsjN7hpu9jyUk3gga/si J7xmgo6w3L8VWGVY2Yiqo+iM/qVXvoNN06dJ8KRm0ZRq7m2iNcRvL3YksXgbACx4 a2JGzfEoQ4DTO/Vy8nHR0GCXXByddQap1uCHmLeery4BiIBDMxll76hsSZyxsaPh fqYwoHCy4NXn+Hp4zDB5y7NpUNra5xqqUVVtnPlc1RbwL9tuurBPG4QKnxB51lkR iUBV340abeqqeJEE7/txsFSB/AEzA+Ff/f/JER/WBfsYL3bwzRxadPqiQA5+QZnt TQD7vnTk5ILKBxw9dBV+HjwDXf5meGOJDuPKM1/tspT572U3K5rrmlI1ZKpnU5fB /2ZwjQviBNhq =uE2l -----END PGP SIGNATURE----- Merge tag 'pm-5.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "Fix three issues related to the handling of wakeup events signaled through the ACPI SCI while suspended to idle (Rafael Wysocki) and unexport an internal cpufreq variable (Yangtao Li)" * tag 'pm-5.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: PM: s2idle: Prevent spurious SCIs from waking up the system ACPICA: Introduce acpi_any_gpe_status_set() ACPI: PM: s2idle: Avoid possible race related to the EC GPE ACPI: EC: Fix flushing of pending work cpufreq: Make cpufreq_global_kobject static |
|
|
Thomas Gleixner
|
cba6437a18 |
genirq/proc: Reject invalid affinity masks (again)
Qian Cai reported that the WARN_ON() in the x86/msi affinity setting code, which catches cases where the affinity setting is not done on the CPU which is the current target of the interrupt, triggers during CPU hotplug stress testing. It turns out that the warning which was added with the commit addressing the MSI affinity race unearthed yet another long standing bug. If user space writes a bogus affinity mask, i.e. it contains no online CPUs, then it calls irq_select_affinity_usr(). This was introduced for ALPHA in |
|
|
Linus Torvalds
|
61a7595403 |
Various fixes:
- Fix an uninitialized variable
- Fix compile bug to bootconfig userspace tool (in tools directory)
- Suppress some error messages of bootconfig userspace tool
- Remove unneded CONFIG_LIBXBC from bootconfig
- Allocate bootconfig xbc_nodes dynamically.
To ease complaints about taking up static memory at boot up
- Use of parse_args() to parse bootconfig instead of strstr() usage
Prevents issues of double quotes containing the interested string
- Fix missing ring_buffer_nest_end() on synthetic event error path
- Return zero not -EINVAL on soft disabled synthetic event
(soft disabling must be the same as hard disabling, which returns zero)
- Consolidate synthetic event code (remove duplicate code)
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXkMTwRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qnJQAQD5aKiD6jx+zGtLsFTuZMcEGvhhUuJ6
oUaSvhKO3UqezwD/V5avKuuC0wWt//gOWDY+0+4QNjmvn1GLnaNYohs6fg0=
=NLT9
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Various fixes:
- Fix an uninitialized variable
- Fix compile bug to bootconfig userspace tool (in tools directory)
- Suppress some error messages of bootconfig userspace tool
- Remove unneded CONFIG_LIBXBC from bootconfig
- Allocate bootconfig xbc_nodes dynamically. To ease complaints about
taking up static memory at boot up
- Use of parse_args() to parse bootconfig instead of strstr() usage
Prevents issues of double quotes containing the interested string
- Fix missing ring_buffer_nest_end() on synthetic event error path
- Return zero not -EINVAL on soft disabled synthetic event (soft
disabling must be the same as hard disabling, which returns zero)
- Consolidate synthetic event code (remove duplicate code)"
* tag 'trace-v5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Consolidate trace() functions
tracing: Don't return -EINVAL when tracing soft disabled synth events
tracing: Add missing nest end to synth_event_trace_start() error case
tools/bootconfig: Suppress non-error messages
bootconfig: Allocate xbc_nodes array dynamically
bootconfig: Use parse_args() to find bootconfig and '--'
tracing/kprobe: Fix uninitialized variable bug
bootconfig: Remove unneeded CONFIG_LIBXBC
tools/bootconfig: Fix wrong __VA_ARGS__ usage
|
|
|
Randy Dunlap
|
e9f5490c35 |
sched/fair: Fix kernel-doc warning in attach_entity_load_avg()
Fix kernel-doc warning in kernel/sched/fair.c, caused by a recent
function parameter removal:
../kernel/sched/fair.c:3526: warning: Excess function parameter 'flags' description in 'attach_entity_load_avg'
Fixes:
|
|
|
Madhuparna Bhowmik
|
4104a562e0 |
sched/core: Annotate curr pointer in rq with __rcu
This patch fixes the following sparse warnings in sched/core.c and sched/membarrier.c: kernel/sched/core.c:2372:27: error: incompatible types in comparison expression kernel/sched/core.c:4061:17: error: incompatible types in comparison expression kernel/sched/core.c:6067:9: error: incompatible types in comparison expression kernel/sched/membarrier.c:108:21: error: incompatible types in comparison expression kernel/sched/membarrier.c:177:21: error: incompatible types in comparison expression kernel/sched/membarrier.c:243:21: error: incompatible types in comparison expression Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20200201125803.20245-1-madhuparnabhowmik10@gmail.com |
|
|
Suren Baghdasaryan
|
6fcca0fa48 |
sched/psi: Fix OOB write when writing 0 bytes to PSI files
Issuing write() with count parameter set to 0 on any file under /proc/pressure/ will cause an OOB write because of the access to buf[buf_size-1] when NUL-termination is performed. Fix this by checking for buf_size to be non-zero. Signed-off-by: Suren Baghdasaryan <surenb@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Link: https://lkml.kernel.org/r/20200203212216.7076-1-surenb@google.com |
|
|
Rafael J. Wysocki
|
e3728b50cd |
ACPI: PM: s2idle: Avoid possible race related to the EC GPE
It is theoretically possible for the ACPI EC GPE to be set after the
s2idle_ops->wake() called from s2idle_loop() has returned and before
the subsequent pm_wakeup_pending() check is carried out. If that
happens, the resulting wakeup event will cause the system to resume
even though it may be a spurious one.
To avoid that race, first make the ->wake() callback in struct
platform_s2idle_ops return a bool value indicating whether or not
to let the system resume and rearrange s2idle_loop() to use that
value instad of the direct pm_wakeup_pending() call if ->wake() is
present.
Next, rework acpi_s2idle_wake() to process EC events and check
pm_wakeup_pending() before re-arming the SCI for system wakeup
to prevent it from triggering prematurely and add comments to
that function to explain the rationale for the new code flow.
Fixes:
|
|
|
Tom Zanussi
|
7276531d40 |
tracing: Consolidate trace() functions
Move the checking, buffer reserve and buffer commit code in synth_event_trace_start/end() into inline functions __synth_event_trace_start/end() so they can also be used by synth_event_trace() and synth_event_trace_array(), and then have all those functions use them. Also, change synth_event_trace_state.enabled to disabled so it only needs to be set if the event is disabled, which is not normally the case. Link: http://lkml.kernel.org/r/b1f3108d0f450e58192955a300e31d0405ab4149.1581374549.git.zanussi@kernel.org Signed-off-by: Tom Zanussi <zanussi@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> |
|
|
Tom Zanussi
|
0c62f6cd9e |
tracing: Don't return -EINVAL when tracing soft disabled synth events
There's no reason to return -EINVAL when tracing a synthetic event if
it's soft disabled - treat it the same as if it were hard disabled and
return normally.
Have synth_event_trace() and synth_event_trace_array() just return
normally, and have synth_event_trace_start set the trace state to
disabled and return.
Link: http://lkml.kernel.org/r/df5d02a1625aff97c9866506c5bada6a069982ba.1581374549.git.zanussi@kernel.org
Fixes:
|
|
|
Tom Zanussi
|
d090409abb |
tracing: Add missing nest end to synth_event_trace_start() error case
If the ring_buffer reserve in synth_event_trace_start() fails, the
matching ring_buffer_nest_end() should be called in the error code,
since nothing else will ever call it in this case.
Link: http://lkml.kernel.org/r/20abc444b3eeff76425f895815380abe7aa53ff8.1581374549.git.zanussi@kernel.org
Fixes:
|
|
|
Linus Torvalds
|
0a679e13ea |
Merge branch 'for-5.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fix from Tejun Heo: "I made a mistake while removing cgroup task list lazy init optimization making the root cgroup.procs show entries for the init_tasks. The zero entries doesn't cause critical failures but does make systemd print out warning messages during boot. Fix it by omitting init_tasks as they should be" * 'for-5.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: init_tasks shouldn't be linked to the root cgroup |
|
|
Hongbo Yao
|
2bf0eb9b3b |
bpf: Make btf_check_func_type_match() static
Fix the following sparse warning: kernel/bpf/btf.c:4131:5: warning: symbol 'btf_check_func_type_match' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Hongbo Yao <yaohongbo@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200210011441.147102-1-yaohongbo@huawei.com |
|
|
Gustavo A. R. Silva
|
10f129cb59 |
tracing/kprobe: Fix uninitialized variable bug
There is a potential execution path in which variable *ret* is returned
without being properly initialized, previously.
Fix this by initializing variable *ret* to 0.
Link: http://lkml.kernel.org/r/20200205223404.GA3379@embeddedor
Addresses-Coverity-ID: 1491142 ("Uninitialized scalar variable")
Fixes:
|
|
|
Mel Gorman
|
52262ee567 |
sched/fair: Allow a per-CPU kthread waking a task to stack on the same CPU, to fix XFS performance regression
The following XFS commit:
|
|
|
Linus Torvalds
|
89a47dd1af |
Kbuild updates for v5.6 (2nd)
- fix randconfig to generate a sane .config
- rename hostprogs-y / always to hostprogs / always-y, which are
more natual syntax.
- optimize scripts/kallsyms
- fix yes2modconfig and mod2yesconfig
- make multiple directory targets ('make foo/ bar/') work
-----BEGIN PGP SIGNATURE-----
iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAl47NfMVHG1hc2FoaXJv
eUBrZXJuZWwub3JnAAoJED2LAQed4NsGRGwP/3AHO8P0wGEeFKs3ziSMjs2W7/Pj
lN08Kuxm0u3LnyEEcHVUveoi+xBYqvrw0RsGgYf5S8q0Mpep7MPqbfkDUxV/0Zkj
QP2CsvOTbjdBjH7q3ojkwLcDl0Pxu9mg3eZMRXZ2WQeNXuMRw6Bicoh7ElvB1Bv/
HC+j30i2Me3cf/riQGSAsstvlXyIR8RaerR8PfRGESTysiiN76+JcHTatJHhOJL9
O6XKkzo8/CXMYKKVF4Ae4NP+WFg6E96/pAPx0Rf47RbPX9UG35L9rkzTDnk70Ms6
OhKiu3hXsRX7mkqApuoTqjge4+iiQcKZxYmMXU1vGlIRzjwg19/4YFP6pDSCcnIu
kKb8KN4o4N41N7MFS3OLZWwISA8Vw6RbtwDZ3AghDWb7EHb9oNW42mGfcAPr1+wZ
/KH6RHTzaz+5q2MgyMY1NhADFrhIT9CvDM+UJECgbokblnw7PHAnPmbsuVak9ZOH
u9ojO1HpTTuIYO6N6v4K5zQBZF1N+RvkmBnhHd8j6SksppsCoC/G62QxgXhF2YK3
FQMpATCpuyengLxWAmPEjsyyPOlrrdu9UxqNsXVy5ol40+7zpxuHwKcQKCa9urJR
rcpbIwLaBcLhHU4BmvBxUk5aZxxGV2F0O0gXTOAbT2xhd6BipZSMhUmN49SErhQm
NC/coUmQX7McxMXh
=sv4U
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- fix randconfig to generate a sane .config
- rename hostprogs-y / always to hostprogs / always-y, which are more
natual syntax.
- optimize scripts/kallsyms
- fix yes2modconfig and mod2yesconfig
- make multiple directory targets ('make foo/ bar/') work
* tag 'kbuild-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: make multiple directory targets work
kconfig: Invalidate all symbols after changing to y or m.
kallsyms: fix type of kallsyms_token_table[]
scripts/kallsyms: change table to store (strcut sym_entry *)
scripts/kallsyms: rename local variables in read_symbol()
kbuild: rename hostprogs-y/always to hostprogs/always-y
kbuild: fix the document to use extra-y for vmlinux.lds
kconfig: fix broken dependency in randconfig-generated .config
|
|
|
Linus Torvalds
|
1a2a76c268 |
A set of fixes for X86:
- Ensure that the PIT is set up when the local APIC is disable or
configured in legacy mode. This is caused by an ordering issue
introduced in the recent changes which skip PIT initialization when the
TSC and APIC frequencies are already known.
- Handle malformed SRAT tables during early ACPI parsing which caused an
infinite loop anda boot hang.
- Fix a long standing race in the affinity setting code which affects PCI
devices with non-maskable MSI interrupts. The problem is caused by the
non-atomic writes of the MSI address (destination APIC id) and data
(vector) fields which the device uses to construct the MSI message. The
non-atomic writes are mandated by PCI.
If both fields change and the device raises an interrupt after writing
address and before writing data, then the MSI block constructs a
inconsistent message which causes interrupts to be lost and subsequent
malfunction of the device.
The fix is to redirect the interrupt to the new vector on the current
CPU first and then switch it over to the new target CPU. This allows to
observe an eventually raised interrupt in the transitional stage (old
CPU, new vector) to be observed in the APIC IRR and retriggered on the
new target CPU and the new vector. The potential spurious interrupts
caused by this are harmless and can in the worst case expose a buggy
driver (all handlers have to be able to deal with spurious interrupts as
they can and do happen for various reasons).
- Add the missing suspend/resume mechanism for the HYPERV hypercall page
which prevents resume hibernation on HYPERV guests. This change got
lost before the merge window.
- Mask the IOAPIC before disabling the local APIC to prevent potentially
stale IOAPIC remote IRR bits which cause stale interrupt lines after
resume.
-----BEGIN PGP SIGNATURE-----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=WxKD
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A set of fixes for X86:
- Ensure that the PIT is set up when the local APIC is disable or
configured in legacy mode. This is caused by an ordering issue
introduced in the recent changes which skip PIT initialization when
the TSC and APIC frequencies are already known.
- Handle malformed SRAT tables during early ACPI parsing which caused
an infinite loop anda boot hang.
- Fix a long standing race in the affinity setting code which affects
PCI devices with non-maskable MSI interrupts. The problem is caused
by the non-atomic writes of the MSI address (destination APIC id)
and data (vector) fields which the device uses to construct the MSI
message. The non-atomic writes are mandated by PCI.
If both fields change and the device raises an interrupt after
writing address and before writing data, then the MSI block
constructs a inconsistent message which causes interrupts to be
lost and subsequent malfunction of the device.
The fix is to redirect the interrupt to the new vector on the
current CPU first and then switch it over to the new target CPU.
This allows to observe an eventually raised interrupt in the
transitional stage (old CPU, new vector) to be observed in the APIC
IRR and retriggered on the new target CPU and the new vector.
The potential spurious interrupts caused by this are harmless and
can in the worst case expose a buggy driver (all handlers have to
be able to deal with spurious interrupts as they can and do happen
for various reasons).
- Add the missing suspend/resume mechanism for the HYPERV hypercall
page which prevents resume hibernation on HYPERV guests. This
change got lost before the merge window.
- Mask the IOAPIC before disabling the local APIC to prevent
potentially stale IOAPIC remote IRR bits which cause stale
interrupt lines after resume"
* tag 'x86-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apic: Mask IOAPIC entries when disabling the local APIC
x86/hyperv: Suspend/resume the hypercall page for hibernation
x86/apic/msi: Plug non-maskable MSI affinity race
x86/boot: Handle malformed SRAT tables during early ACPI parsing
x86/timer: Don't skip PIT setup when APIC is disabled or in legacy mode
|
|
|
Linus Torvalds
|
f41377609a |
Two fixes for the SMP related functionality:
- Make the UP version of smp_call_function_single() match SMP semantics
when called for a not available CPU. Instead of emitting a warning and
assuming that the function call target is CPU0, return a proper error
code like the SMP version does.
- Remove a superfluous check in smp_call_function_many_cond()
-----BEGIN PGP SIGNATURE-----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=XfHp
-----END PGP SIGNATURE-----
Merge tag 'smp-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull SMP fixes from Thomas Gleixner:
"Two fixes for the SMP related functionality:
- Make the UP version of smp_call_function_single() match SMP
semantics when called for a not available CPU. Instead of emitting
a warning and assuming that the function call target is CPU0,
return a proper error code like the SMP version does.
- Remove a superfluous check in smp_call_function_many_cond()"
* tag 'smp-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
smp/up: Make smp_call_function_single() match SMP semantics
smp: Remove superfluous cond_func check in smp_call_function_many_cond()
|
|
|
Linus Torvalds
|
ca21b9b370 |
A set of fixes and improvements for the perf subsystem:
- Kernel fixes:
- Install cgroup events to the correct CPU context to prevent a
potential list double add
- Prevent am intgeer underflow in the perf mlock acounting
- Add a missing prototyp for arch_perf_update_userpage()
- Tooling:
- Add a missing unlock in the error path of maps__insert() in perf maps.
- Fix the build with the latest libbfd
- Fix the perf parser so it does not delete parse event terms, which
caused a regression for using perf with the ARM CoreSight as the sink
confuguration was missing due to the deletion.
- Fix the double free in the perf CPU map merging test case
- Add the missing ustring support for the perf probe command
-----BEGIN PGP SIGNATURE-----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=xu7D
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
"A set of fixes and improvements for the perf subsystem:
Kernel fixes:
- Install cgroup events to the correct CPU context to prevent a
potential list double add
- Prevent an integer underflow in the perf mlock accounting
- Add a missing prototype for arch_perf_update_userpage()
Tooling:
- Add a missing unlock in the error path of maps__insert() in perf
maps.
- Fix the build with the latest libbfd
- Fix the perf parser so it does not delete parse event terms, which
caused a regression for using perf with the ARM CoreSight as the
sink configuration was missing due to the deletion.
- Fix the double free in the perf CPU map merging test case
- Add the missing ustring support for the perf probe command"
* tag 'perf-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf maps: Add missing unlock to maps__insert() error case
perf probe: Add ustring support for perf probe command
perf: Make perf able to build with latest libbfd
perf test: Fix test case Merge cpu map
perf parse: Copy string to perf_evsel_config_term
perf parse: Refactor 'struct perf_evsel_config_term'
kernel/events: Add a missing prototype for arch_perf_update_userpage()
perf/cgroups: Install cgroup events to correct cpuctx
perf/core: Fix mlock accounting in perf_mmap()
|
|
|
Linus Torvalds
|
2fbc23c738 |
Two small fixes for the time(r) subsystem:
- Handle a subtle race between the clocksource watchdog and a concurrent
clocksource watchdog stop/start sequence correctly to prevent a timer
double add bug.
- Fix the file path for the core time namespace file.
-----BEGIN PGP SIGNATURE-----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=0zFj
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"Two small fixes for the time(r) subsystem:
- Handle a subtle race between the clocksource watchdog and a
concurrent clocksource watchdog stop/start sequence correctly to
prevent a timer double add bug.
- Fix the file path for the core time namespace file"
* tag 'timers-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource: Prevent double add_timer_on() for watchdog_timer
MAINTAINERS: Correct path to time namespace source file
|
|
|
Linus Torvalds
|
f06bed87d7 |
A set of fixes for the interrupt subsystem:
- Provision only ACPI enabled redistributors on GICv3
- Use the proper command colums when building the INVALL command for the
GICv3-ITS
- Ensure the allocation of the L2 vPE table for GICv4.1
- Correct the GICv4.1 VPROBASER programming so it uses the proper size
- A set of small GICv4.1 tidy up patches
- Configuration cleanup for C-SKY interrupt chip
- Clarify the function documentation for irq_set_wake() to document that
the wakeup functionality is orthogonal to the irq disable/enable
mechanism.
-----BEGIN PGP SIGNATURE-----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=a9t/
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt fixes from Thomas Gleixner:
"A set of fixes for the interrupt subsystem:
- Provision only ACPI enabled redistributors on GICv3
- Use the proper command colums when building the INVALL command for
the GICv3-ITS
- Ensure the allocation of the L2 vPE table for GICv4.1
- Correct the GICv4.1 VPROBASER programming so it uses the proper
size
- A set of small GICv4.1 tidy up patches
- Configuration cleanup for C-SKY interrupt chip
- Clarify the function documentation for irq_set_wake() to document
that the wakeup functionality is orthogonal to the irq
disable/enable mechanism"
* tag 'irq-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3-its: Rename VPENDBASER/VPROPBASER accessors
irqchip/gic-v3-its: Remove superfluous WARN_ON
irqchip/gic-v4.1: Drop 'tmp' in inherit_vpe_l1_table_from_rd()
irqchip/gic-v4.1: Ensure L2 vPE table is allocated at RD level
irqchip/gic-v4.1: Set vpe_l1_base for all redistributors
irqchip/gic-v4.1: Fix programming of GICR_VPROPBASER_4_1_SIZE
genirq: Clarify that irq wake state is orthogonal to enable/disable
irqchip/gic-v3-its: Reference to its_invall_cmd descriptor when building INVALL
irqchip: Some Kconfig cleanup for C-SKY
irqchip/gic-v3: Only provision redistributors that are enabled in ACPI
|
|
|
Linus Torvalds
|
291abfea47 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from David Miller:
1) Unbalanced locking in mwifiex_process_country_ie, from Brian Norris.
2) Fix thermal zone registration in iwlwifi, from Andrei
Otcheretianski.
3) Fix double free_irq in sgi ioc3 eth, from Thomas Bogendoerfer.
4) Use after free in mptcp, from Florian Westphal.
5) Use after free in wireguard's root_remove_peer_lists, from Eric
Dumazet.
6) Properly access packets heads in bonding alb code, from Eric
Dumazet.
7) Fix data race in skb_queue_len(), from Qian Cai.
8) Fix regression in r8169 on some chips, from Heiner Kallweit.
9) Fix XDP program ref counting in hv_netvsc, from Haiyang Zhang.
10) Certain kinds of set link netlink operations can cause a NULL deref
in the ipv6 addrconf code. Fix from Eric Dumazet.
11) Don't cancel uninitialized work queue in drop monitor, from Ido
Schimmel.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits)
net: thunderx: use proper interface type for RGMII
mt76: mt7615: fix max_nss in mt7615_eeprom_parse_hw_cap
bpf: Improve bucket_log calculation logic
selftests/bpf: Test freeing sockmap/sockhash with a socket in it
bpf, sockhash: Synchronize_rcu before free'ing map
bpf, sockmap: Don't sleep while holding RCU lock on tear-down
bpftool: Don't crash on missing xlated program instructions
bpf, sockmap: Check update requirements after locking
drop_monitor: Do not cancel uninitialized work item
mlxsw: spectrum_dpipe: Add missing error path
mlxsw: core: Add validation of hardware device types for MGPIR register
mlxsw: spectrum_router: Clear offload indication from IPv6 nexthops on abort
selftests: mlxsw: Add test cases for local table route replacement
mlxsw: spectrum_router: Prevent incorrect replacement of local table routes
net: dsa: microchip: enable module autoprobe
ipv6/addrconf: fix potential NULL deref in inet6_set_link_af()
dpaa_eth: support all modes with rate adapting PHYs
net: stmmac: update pci platform data to use phy_interface
net: stmmac: xgmac: fix missing IFF_MULTICAST checki in dwxgmac2_set_filter
net: stmmac: fix missing IFF_MULTICAST check in dwmac4_set_filter
...
|
|
|
Linus Torvalds
|
c9d35ee049 |
Merge branch 'merge.nfs-fs_parse.1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs file system parameter updates from Al Viro: "Saner fs_parser.c guts and data structures. The system-wide registry of syntax types (string/enum/int32/oct32/.../etc.) is gone and so is the horror switch() in fs_parse() that would have to grow another case every time something got added to that system-wide registry. New syntax types can be added by filesystems easily now, and their namespace is that of functions - not of system-wide enum members. IOW, they can be shared or kept private and if some turn out to be widely useful, we can make them common library helpers, etc., without having to do anything whatsoever to fs_parse() itself. And we already get that kind of requests - the thing that finally pushed me into doing that was "oh, and let's add one for timeouts - things like 15s or 2h". If some filesystem really wants that, let them do it. Without somebody having to play gatekeeper for the variants blessed by direct support in fs_parse(), TYVM. Quite a bit of boilerplate is gone. And IMO the data structures make a lot more sense now. -200LoC, while we are at it" * 'merge.nfs-fs_parse.1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (25 commits) tmpfs: switch to use of invalfc() cgroup1: switch to use of errorfc() et.al. procfs: switch to use of invalfc() hugetlbfs: switch to use of invalfc() cramfs: switch to use of errofc() et.al. gfs2: switch to use of errorfc() et.al. fuse: switch to use errorfc() et.al. ceph: use errorfc() and friends instead of spelling the prefix out prefix-handling analogues of errorf() and friends turn fs_param_is_... into functions fs_parse: handle optional arguments sanely fs_parse: fold fs_parameter_desc/fs_parameter_spec fs_parser: remove fs_parameter_description name field add prefix to fs_context->log ceph_parse_param(), ceph_parse_mon_ips(): switch to passing fc_log new primitive: __fs_parse() switch rbd and libceph to p_log-based primitives struct p_log, variants of warnf() et.al. taking that one instead teach logfc() to handle prefices, give it saner calling conventions get rid of cg_invalf() ... |
|
|
David S. Miller
|
2696e1146d |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says: ==================== pull-request: bpf 2020-02-07 The following pull-request contains BPF updates for your *net* tree. We've added 15 non-merge commits during the last 10 day(s) which contain a total of 12 files changed, 114 insertions(+), 31 deletions(-). The main changes are: 1) Various BPF sockmap fixes related to RCU handling in the map's tear- down code, from Jakub Sitnicki. 2) Fix macro state explosion in BPF sk_storage map when calculating its bucket_log on allocation, from Martin KaFai Lau. 3) Fix potential BPF sockmap update race by rechecking socket's established state under lock, from Lorenz Bauer. 4) Fix crash in bpftool on missing xlated instructions when kptr_restrict sysctl is set, from Toke Høiland-Jørgensen. 5) Fix i40e's XSK wakeup code to return proper error in busy state and various misc fixes in xdpsock BPF sample code, from Maciej Fijalkowski. 6) Fix the way modifiers are skipped in BTF in the verifier while walking pointers to avoid program rejection, from Alexei Starovoitov. 7) Fix Makefile for runqslower BPF tool to i) rebuild on libbpf changes and ii) to fix undefined reference linker errors for older gcc version due to order of passed gcc parameters, from Yulia Kartseva and Song Liu. 8) Fix a trampoline_count BPF kselftest warning about missing braces around initializer, from Andrii Nakryiko. 9) Fix up redundant "HAVE" prefix from large INSN limit kernel probe in bpftool, from Michal Rostecki. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> |
|
|
Stephen Boyd
|
f9f21cea31 |
genirq: Clarify that irq wake state is orthogonal to enable/disable
There's some confusion around if an irq that's disabled with disable_irq() can still wake the system from sleep states such as "suspend to RAM". Clarify this in the kernel documentation for irq_set_irq_wake() so that it's clear that an irq can be disabled and still wake the system if it has been marked for wakeup. Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lkml.kernel.org/r/20200206191521.94559-1-swboyd@chromium.org |
|
|
Al Viro
|
58c025f0e8 |
cgroup1: switch to use of errorfc() et.al.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> |
|
|
Al Viro
|
d7167b1499 |
fs_parse: fold fs_parameter_desc/fs_parameter_spec
The former contains nothing but a pointer to an array of the latter... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> |
|
|
Eric Sandeen
|
96cafb9ccb |
fs_parser: remove fs_parameter_description name field
Unused now. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> |
|
|
Al Viro
|
fbc2d1686d |
get rid of cg_invalf()
pointless alias for invalf()... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> |
|
|
Paul E. McKenney
|
1e474b28e7 |
smp/up: Make smp_call_function_single() match SMP semantics
In CONFIG_SMP=y kernels, smp_call_function_single() returns -ENXIO when invoked for a non-existent CPU. In contrast, in CONFIG_SMP=n kernels, a splat is emitted and smp_call_function_single() otherwise silently ignores its "cpu" argument, instead pretending that the caller intended to have something happen on CPU 0. Given that there is now code that expects smp_call_function_single() to return an error if a bad CPU was specified, this difference in semantics needs to be addressed. Bring the semantics of the CONFIG_SMP=n version of smp_call_function_single() into alignment with its CONFIG_SMP=y counterpart. Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20200205143409.GA7021@paulmck-ThinkPad-P72 |
|
|
Linus Torvalds
|
d854b2d639 |
kgdb fixes for 5.6-rc1
One of the simplifications added for 5.6-rc1 has caused build regressions on some platforms (it was reported for sparc64). This pull request fixes it with a direct revert. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEELzVBU1D3lWq6cKzwfOMlXTn3iKEFAl48JNUACgkQfOMlXTn3 iKF7cA/9G3hl4IB1D2OfbbLb6lXPu+TEWDsQk7Y5CmKgbclMv+JL684TJCU7rnFB Xxjho97Cj9bqR3ZGDInxLcJrAnbaD6756UC7k5jVUIcdFFhprjdgWImyJVs6VXoe ESahpSna+Ap3ZsMBgQJUfnBbDzY/B3jmPQ8/f7qOIjBb17AdarisClk2CdbY90Gi 0dfJti65SLqE10on7Clx+9HmNkPp9Rs+1+4O9r2LW5c9b6aNop8iQPdLdl7/B2Me V9Vs5uAsLqNKBpyFuq3PG1AXzK53gK2N3wZqmOPAuKAObDM/wUqvVHaAJHqiIWN9 U+Dn9aZCIW3Mbeat4RijVT8CCoz1WEvCQM1MUk5sbgBnQ90vwSyDmJrA88GMoHtI wmP5OJL/EdghGWG9+PcFH2+axD87iEq48hxVXlB9UTtvoyjLkkiXm3WvOx2UC8rX 8tjEZvivMO3GeJBxYQUXvSFzGUeJAMZhMQm9+0qaw//SJK5GyEG0CfDDp5Ts1q2w +F689/TaygpOZGP5m1iFqhNAoR03g+NTX33/CYoa+Yplnn+j+LU4ZTlNq4vl1VY6 lATR3Eu/vLYhCqdeXaZpRx4cthEFQ3kl8tT53RU2Ip20cNQkNooHPpCpkk0vSuGx X0PV9CX/nAFWGrfbJLCW3AQ2ZTxqdl8i2Q7HzOJUJPrddppqN/U= =Pb+W -----END PGP SIGNATURE----- Merge tag 'kgdb-fixes-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux Pull kgdb fix from Daniel Thompson: "One of the simplifications added for 5.6-rc1 has caused build regressions on some platforms (it was reported for sparc64). This fixes it with a revert" * tag 'kgdb-fixes-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux: Revert "kdb: Get rid of confusing diag msg from "rd" if current task has no regs" |
|
|
Daniel Thompson
|
fcf2736c82 |
Revert "kdb: Get rid of confusing diag msg from "rd" if current task has no regs"
This reverts commit
|
|
|
Linus Torvalds
|
e310396bb8 |
Tracing updates:
- Added new "bootconfig".
Looks for a file appended to initrd to add boot config options.
This has been discussed thoroughly at Linux Plumbers.
Very useful for adding kprobes at bootup.
Only enabled if "bootconfig" is on the real kernel command line.
- Created dynamic event creation.
Merges common code between creating synthetic events and
kprobe events.
- Rename perf "ring_buffer" structure to "perf_buffer"
- Rename ftrace "ring_buffer" structure to "trace_buffer"
Had to rename existing "trace_buffer" to "array_buffer"
- Allow trace_printk() to work withing (some) tracing code.
- Sort of tracing configs to be a little better organized
- Fixed bug where ftrace_graph hash was not being protected properly
- Various other small fixes and clean ups
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXjtAURQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qshOAQDzopQmvAVrrI6oogghr8JQA30Z2yqT
i+Ld7vPWL2MV9wEA1S+zLGDSYrj8f/vsCq6BxRYT1ApO+YtmY6LTXiUejwg=
=WNds
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
- Added new "bootconfig".
This looks for a file appended to initrd to add boot config options,
and has been discussed thoroughly at Linux Plumbers.
Very useful for adding kprobes at bootup.
Only enabled if "bootconfig" is on the real kernel command line.
- Created dynamic event creation.
Merges common code between creating synthetic events and kprobe
events.
- Rename perf "ring_buffer" structure to "perf_buffer"
- Rename ftrace "ring_buffer" structure to "trace_buffer"
Had to rename existing "trace_buffer" to "array_buffer"
- Allow trace_printk() to work withing (some) tracing code.
- Sort of tracing configs to be a little better organized
- Fixed bug where ftrace_graph hash was not being protected properly
- Various other small fixes and clean ups
* tag 'trace-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (88 commits)
bootconfig: Show the number of nodes on boot message
tools/bootconfig: Show the number of bootconfig nodes
bootconfig: Add more parse error messages
bootconfig: Use bootconfig instead of boot config
ftrace: Protect ftrace_graph_hash with ftrace_sync
ftrace: Add comment to why rcu_dereference_sched() is open coded
tracing: Annotate ftrace_graph_notrace_hash pointer with __rcu
tracing: Annotate ftrace_graph_hash pointer with __rcu
bootconfig: Only load bootconfig if "bootconfig" is on the kernel cmdline
tracing: Use seq_buf for building dynevent_cmd string
tracing: Remove useless code in dynevent_arg_pair_add()
tracing: Remove check_arg() callbacks from dynevent args
tracing: Consolidate some synth_event_trace code
tracing: Fix now invalid var_ref_vals assumption in trace action
tracing: Change trace_boot to use synth_event interface
tracing: Move tracing selftests to bottom of menu
tracing: Move mmio tracer config up with the other tracers
tracing: Move tracing test module configs together
tracing: Move all function tracing configs together
tracing: Documentation for in-kernel synthetic event API
...
|
|
|
Steven Rostedt (VMware)
|
54a16ff6f2 |
ftrace: Protect ftrace_graph_hash with ftrace_sync
As function_graph tracer can run when RCU is not "watching", it can not be
protected by synchronize_rcu() it requires running a task on each CPU before
it can be freed. Calling schedule_on_each_cpu(ftrace_sync) needs to be used.
Link: https://lore.kernel.org/r/20200205131110.GT2935@paulmck-ThinkPad-P72
Cc: stable@vger.kernel.org
Fixes:
|
|
|
Steven Rostedt (VMware)
|
16052dd5bd |
ftrace: Add comment to why rcu_dereference_sched() is open coded
Because the function graph tracer can execute in sections where RCU is not "watching", the rcu_dereference_sched() for the has needs to be open coded. This is fine because the RCU "flavor" of the ftrace hash is protected by its own RCU handling (it does its own little synchronization on every CPU and does not rely on RCU sched). Acked-by: Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> |
|
|
Amol Grover
|
fd0e6852c4 |
tracing: Annotate ftrace_graph_notrace_hash pointer with __rcu
Fix following instances of sparse error kernel/trace/ftrace.c:5667:29: error: incompatible types in comparison kernel/trace/ftrace.c:5813:21: error: incompatible types in comparison kernel/trace/ftrace.c:5868:36: error: incompatible types in comparison kernel/trace/ftrace.c:5870:25: error: incompatible types in comparison Use rcu_dereference_protected to dereference the newly annotated pointer. Link: http://lkml.kernel.org/r/20200205055701.30195-1-frextrite@gmail.com Signed-off-by: Amol Grover <frextrite@gmail.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> |
|
|
Amol Grover
|
24a9729f83 |
tracing: Annotate ftrace_graph_hash pointer with __rcu
Fix following instances of sparse error kernel/trace/ftrace.c:5664:29: error: incompatible types in comparison kernel/trace/ftrace.c:5785:21: error: incompatible types in comparison kernel/trace/ftrace.c:5864:36: error: incompatible types in comparison kernel/trace/ftrace.c:5866:25: error: incompatible types in comparison Use rcu_dereference_protected to access the __rcu annotated pointer. Link: http://lkml.kernel.org/r/20200201072703.17330-1-frextrite@gmail.com Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by: Amol Grover <frextrite@gmail.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> |
|
|
Christoph Hellwig
|
75467ee48a |
dma-direct: improve DMA mask overflow reporting
Remove the unset dma_mask case as that won't get into mapping calls anymore, and also report the other errors unconditonally and with a slightly improved message. Remove the now pointless report_addr helper. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Konrad Rzeszutek Wilk <konrad@darnok.org> |
|
|
Christoph Hellwig
|
4a47cbae04 |
dma-direct: improve swiotlb error reporting
Untangle the way how dma_direct_map_page calls into swiotlb to be able to properly report errors where the swiotlb DMA address overflows the mask separately from overflows in the !swiotlb case. This means that siotlb_map now has to do a little more work that duplicates dma_direct_map_page, but doing so greatly simplifies the calling convention. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> |
|
|
Christoph Hellwig
|
91ef26f914 |
dma-direct: relax addressability checks in dma_direct_supported
dma_direct_supported tries to find the minimum addressable bitmask
based on the end pfn and optional magic that architectures can use
to communicate the size of the magic ZONE_DMA that can be used
for bounce buffering. But between the DMA offsets that can change
per device (or sometimes even region), the fact the ZONE_DMA isn't
even guaranteed to be the lowest addresses and failure of having
proper interfaces to the MM code this fails at least for one
arm subarchitecture.
As all the legacy DMA implementations have supported 32-bit DMA
masks, and 32-bit masks are guranteed to always work by the API
contract (using bounce buffers if needed), we can short cut the
complicated check and always return true without breaking existing
assumptions. Hopefully we can properly clean up the interaction
with the arch defined zones and the bootmem allocator eventually.
Fixes:
|