Using struct drm_device.pdev is deprecated. Convert i915 to struct
drm_device.dev. No functional changes.
v6:
* also remove assignment in selftests/ in a later patch (Chris)
v5:
* remove assignment in later patch (Chris)
v3:
* rebased
v2:
* move gt/ and gvt/ changes into separate patches
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210128133127.2311-2-tzimmermann@suse.de
UAPI Changes:
- Deprecate I915_PMU_LAST and optimize state tracking (Tvrtko)
Avoid relying on last item ABI marker in i915_drm.h, add a
comment to mark as deprecated.
Cross-subsystem Changes:
Core Changes:
Driver Changes:
- Restore clear residuals security mitigations for Ivybridge and
Baytrail (Chris)
- Close#1858: Allow sysadmin to choose applied GPU security mitigations
through i915.mitigations=... similar to CPU (Chris)
- Fix for #2024: GPU hangs on HSW GT1 (Chris)
- Fix for #2707: Driver hang when editing UVs in Blender (Chris, Ville)
- Fix for #2797: False positive GuC loading error message (Chris)
- Fix for #2859: Missing GuC firmware for older Cometlakes (Chris)
- Lessen probability of GPU hang due to DMAR faults [reason 7,
next page table ptr is invalid] on Tigerlake (Chris)
- Fix REVID macros for TGL to fetch correct stepping (Aditya)
- Limit frequency drop to RPe on parking (Chris, Edward)
- Limit W/A 1406941453 to TGL, RKL and DG1 (Swathi)
- Make W/A 22010271021 permanent on DG1 (Lucas)
- Implement W/A 16011163337 to prevent a HS/DS hang on DG1 (Swathi)
- Only disable preemption on gen8 render engines (Chris)
- Disable arbitration around Braswell's PDP updates (Chris)
- Disable arbitration on no-preempt requests (Chris)
- Check for arbitration after writing start seqno before busywaiting (Chris)
- Retain default context state across shrinking (Venkata, CQ)
- Fix mismatch between misplaced vma check and vma insert for 32-bit
addressing userspaces (Chris, CQ)
- Propagate error for vmap() failure instead kernel NULL deref (Chris)
- Propagate error from cancelled submit due to context closure
immediately (Chris)
- Fix RCU race on HWSP tracking per request (Chris)
- Clear CMD parser shadow and GPU reloc batches (Matt A)
- Populate logical context during first pin (Maarten)
- Optimistically prune dma-resv from the shrinker (Chris)
- Fix for virtual engine ownership race (Chris)
- Remove timeslice suppression to restore fairness for virtual engines (Chris)
- Rearrange IVB/HSW workarounds properly between GT and engine (Chris)
- Taint the reset mutex with the shrinker (Chris)
- Replace direct submit with direct call to tasklet (Chris)
- Multiple corrections to virtual engine dequeue and breadcrumbs code (Chris)
- Avoid wakeref from potentially hard IRQ context in PMU (Tvrtko)
- Use raw clock for RC6 time estimation in PMU (Tvrtko)
- Differentiate OOM failures from invalid map types (Chris)
- Fix Gen9 to have 64 MOCS entries similar to Gen11 (Chris)
- Ignore repeated attempts to suspend request flow across reset (Chris)
- Remove livelock from "do_idle_maps" VT-d W/A (Chris)
- Cancel the preemption timeout early in case engine reset fails (Chris)
- Code flow optimization in the scheduling code (Chris)
- Clear the execlists timers upon reset (Chris)
- Drain the breadcrumbs just once (Chris, Matt A)
- Track the overall GT awake/busy time (Chris)
- Tweak submission tasklet flushing to avoid starvation (Chris)
- Track timelines created using the HWSP to restore on resume (Chris)
- Use cmpxchg64 for 32b compatilibity for active tracking (Chris)
- Prefer recycling an idle GGTT fence to avoid GPU wait (Chris)
- Restructure GT code organization for clearer split between GuC
and execlists (Chris, Daniele, John, Matt A)
- Remove GuC code that will remain unused by new interfaces (Matt B)
- Restructure the CS timestamp clocks code to local to GT (Chris)
- Fix error return paths in perf code (Zhang)
- Replace idr_init() by idr_init_base() in perf (Deepak)
- Fix shmem_pin_map error path (Colin)
- Drop redundant free_work worker for GEM contexts (Chris, Mika)
- Increase readability and understandability of intel_workarounds.c (Lucas)
- Defer enabling the breadcrumb interrupt to after submission (Chris)
- Deal with buddy alloc block sizes beyond 4G (Venkata, Chris)
- Encode fence specific waitqueue behaviour into the wait.flags (Chris)
- Don't cancel the breadcrumb interrupt shadow too early (Chris)
- Cancel submitted requests upon context reset (Chris)
- Use correct locks in GuC code (Tvrtko)
- Prevent use of engine->wa_ctx after error (Chris, Matt R)
- Fix build warning on 32-bit (Arnd)
- Avoid memory leak if platform would have more than 16 W/A (Tvrtko)
- Avoid unnecessary #if CONFIG_PM in PMU code (Chris, Tvrtko)
- Improve debugging output (Chris, Tvrtko, Matt R)
- Make file local variables static (Jani)
- Avoid uint*_t types in i915 (Jani)
- Selftest improvements (Chris, Matt A, Dan)
- Documentation fixes (Chris, Jose)
Signed-off-by: Dave Airlie <airlied@redhat.com>
# Conflicts:
# drivers/gpu/drm/i915/gt/intel_breadcrumbs.c
# drivers/gpu/drm/i915/gt/intel_breadcrumbs_types.h
# drivers/gpu/drm/i915/gt/intel_lrc.c
# drivers/gpu/drm/i915/gvt/mmio_context.h
# drivers/gpu/drm/i915/i915_drv.h
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210114152232.GA21588@jlahtine-mobl.ger.corp.intel.com
accesses, inefficient and disfunctional code. The goal is to remove the
export of irq_to_desc() to prevent these things from creeping up again.
-----BEGIN PGP SIGNATURE-----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=BXv+
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2020-12-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"This is the second attempt after the first one failed miserably and
got zapped to unblock the rest of the interrupt related patches.
A treewide cleanup of interrupt descriptor (ab)use with all sorts of
racy accesses, inefficient and disfunctional code. The goal is to
remove the export of irq_to_desc() to prevent these things from
creeping up again"
* tag 'irq-core-2020-12-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
genirq: Restrict export of irq_to_desc()
xen/events: Implement irq distribution
xen/events: Reduce irq_info:: Spurious_cnt storage size
xen/events: Only force affinity mask for percpu interrupts
xen/events: Use immediate affinity setting
xen/events: Remove disfunct affinity spreading
xen/events: Remove unused bind_evtchn_to_irq_lateeoi()
net/mlx5: Use effective interrupt affinity
net/mlx5: Replace irq_to_desc() abuse
net/mlx4: Use effective interrupt affinity
net/mlx4: Replace irq_to_desc() abuse
PCI: mobiveil: Use irq_data_get_irq_chip_data()
PCI: xilinx-nwl: Use irq_data_get_irq_chip_data()
NTB/msi: Use irq_has_action()
mfd: ab8500-debugfs: Remove the racy fiddling with irq_desc
pinctrl: nomadik: Use irq_has_action()
drm/i915/pmu: Replace open coded kstat_irqs() copy
drm/i915/lpe_audio: Remove pointless irq_to_desc() usage
s390/irq: Use irq_desc_kstat_cpu() in show_msi_interrupt()
parisc/irq: Use irq_desc_kstat_cpu() in show_interrupts()
...
Since we wake the GT up before executing a request, and go to sleep as
soon as it is retired, the GT wake time not only represents how long the
device is powered up, but also provides a summary, albeit an overestimate,
of the device runtime (i.e. the rc0 time to compare against rc6 time).
v2: s/busy/awake/
v3: software-gt-awake-time and I915_PMU_SOFTWARE_GT_AWAKE_TIME
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215154456.13954-1-chris@chris-wilson.co.uk
Driver code has no business with the internals of the irq descriptor.
Aside of that the count is per interrupt line and therefore takes
interrupts from other devices into account which share the interrupt line
and are not handled by the graphics driver.
Replace it with a pmu private count which only counts interrupts which
originate from the graphics card.
To avoid atomics or heuristics of some sort make the counter field
'unsigned long'. That limits the count to 4e9 on 32bit which is a lot and
postprocessing can easily deal with the occasional wraparound.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://lore.kernel.org/r/20201210194043.957046529@linutronix.de
Chris spotted that since 16ffe73c18 ("drm/i915/pmu: Use GT parked for
estimating RC6 while asleep") we don't rely on runtime pm internals when
estimating RC6 while asleep. We can remove the ifdef code to simplify and
at the same time wake up the device less when querying RC6 if CONFIG_PM is
not compiled in.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
References: 16ffe73c18 ("drm/i915/pmu: Use GT parked for estimating RC6 while asleep")
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201214094349.3563876-3-tvrtko.ursulin@linux.intel.com
Chris found a CI report which points out calling intel_runtime_pm_get from
inside i915_pmu_enable hook is not allowed since it can be invoked from
hard irq context. This is something we knew but forgot, so lets fix it
once again.
We do this by syncing the internal book keeping with hardware rc6 counter
on driver load.
v2:
* Always sync on parking and fully sync on init.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: f4e9894b69 ("drm/i915/pmu: Correct the rc6 offset upon enabling")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201214094349.3563876-1-tvrtko.ursulin@linux.intel.com
Adding any kinds of "last" abi markers is usually a mistake which I
repeated when implementing the PMU because it felt convenient at the time.
This patch marks I915_PMU_LAST as deprecated and stops the internal
implementation using it for sizing the event status bitmask and array.
New way of sizing the fields is a bit less elegant, but it omits reserving
slots for tracking events we are not interested in, and as such saves some
runtime space. Adding sampling events is likely to be a special event and
the new plumbing needed will be easily detected in testing. Existing
asserts against the bitfield and array sizes are keeping the code safe.
First event which gets the new treatment in this new scheme are the
interrupts - which neither needs any tracking in i915 pmu nor needs
waking up the GPU to read it.
v2:
* Streamline helper names. (Chris)
v3:
* Comment which events need tracking. (Chris)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201201131757.206367-1-tvrtko.ursulin@linux.intel.com
Cross-subsystem Changes:
- DMA mapped scatterlist fixes in i915 to unblock merging of
https://lkml.org/lkml/2020/9/27/70 (Tvrtko, Tom)
Driver Changes:
- Fix for user reported issue #2381 (Graphical output stops with "switching to inteldrmfb from simple"):
Mark ininitial fb obj as WT on eLLC machines to avoid rcu lockup during fbdev init (Ville, Chris)
- Fix for Tigerlake (and earlier) to avoid spurious empty CSB events leading to hang (Chris, Bruce)
- Delay execlist processing for Tigerlake to avoid hang (Chris)
- Fix for Tigerlake RCS engine health check through heartbeat (Chris)
- Fix for Tigerlake reserved MOCS entries (Ayaz, Chris)
- Fix Media power gate sequence on Tigerlake (Rodrigo)
- Enable eLLC caching of display buffers for SKL+ (Ville)
- Support parsing of oversize batches on Gen9 (Matt, Chris)
- Exclude low pages (128KiB) of stolen from use to avoid thrashing during reset (Chris)
- Flush engines before Tigerlake breadcrumbs (Chris)
- Use the local HWSP offset during submission (Chris)
- Flush coherency domains on first set-domain-ioctl (Chris, Zbigniew)
- Use the active reference on the vma while capturing to avoid use-after-free (Chris)
- Fix MOCS PTE setting for gen9+ (Ville)
- Avoid NULL dereference on IPS driver callback while unbinding i915 (Chris)
- Avoid NULL dereference from PT/PD stash allocation error (Matt)
- Hold request reference for canceling an active context (Chris)
- Avoid infinite loop on x86-32 when mapping a lot of objects (Chris)
- Disallow WC mappings when processor doesn't support them (Chris)
- Return correct error in i915_gem_object_copy_blt() error path (Dan)
- Return correct error in intel_context_create_request() error path (Maarten)
- Tune down GuC communication enabled/disabled messages to debug (Jani)
- Fix rebased commit "Remove i915_request.lock requirement for execution callbacks" (Chris)
- Cancel outstanding work after disabling heartbeats on an engine (Chris)
- Signal cancelled requests (Chris)
- Retire cancelled requests on unload (Chris)
- Scrub HW state on driver remove (Chris)
- Undo forced context restores after trivial preemptions (Chris)
- Handle PCI unbind in PMU code (Tvrtko)
- Fix CPU hotplug with multiple GPUs in PMU code (Trtkko)
- Correctly set SFC capability for video engines (Venkata)
- Update GuC code to use firmware v49.0.1 (John, Matthew B., Daniele, Oscar, Michel, Rodrigo, Michal)
- Improve GuC warnings on loading failure (John)
- Avoid ownership race in buffer pool by clearing age (Chris)
- Use MMIO to read CSB in case of failure (Chris, Mika)
- Show engine properties in engine state dump to indicate changes (Chris, Joonas)
- Break up error capture compression loops with cond_resched() (Chris)
- Reduce GPU error capture mutex hold time to avoid khungtaskd (Chris)
- Serialise debugfs i915_gem_objects with ctx->mutex (Chris)
- Always test execution status on closing the context and close if not persistent (Chris)
- Avoid mixing integer types during batch copies (Chris, Jared)
- Skip over MI_NOOP when parsing to avoid overhead (Chris)
- Hold onto an explicit ref to i915_vma_work.pinned (Chris)
- Perform all asynchronous waits prior to marking payload start (Chris)
- Pull phys pread/pwrite implementations to the backend (Matt)
- Improve record of hung engines in error state (Tvrtko)
- Allow backends to override pread implementation (Matt)
- Reinforce LRC poisoning checks to confirm context survives execution (Chris)
- Fix memory region max size calculation (Matt)
- Fix order when adding blocks to memory region (Matt)
- Eliminate unused intel_virtual_engine_get_sibling func (Chris)
- Cleanup kasan warning for on-stack (unsigned long) casting (Chris)
- Onion unwind for scratch page allocation failure (Chris)
- Poison stolen pages before use (Chris)
- Selftest improvements (Chris)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201112163407.GA20320@jlahtine-mobl.ger.corp.intel.com
Since we keep a driver global mask of online CPUs and base the decision
whether PMU needs to be migrated upon it, we need to make sure the
migration is done for all registered PMUs (so GPUs).
To do this we need to track the current CPU for each PMU and base the
decision on whether to migrate on a comparison between global and local
state.
At the same time, since dynamic CPU hotplug notification slots are a
scarce resource and given how we already register the multi instance type
state, we can and should add multiple instance of the i915 PMU to this
same state and not allocate a new one for every GPU.
v2:
* Use pr_notice. (Chris)
v3:
* Handle a nasty interaction where unregistration which triggers a false
CPU offline event. (Chris)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Suggested-by: Daniel Vetter <daniel.vetter@intel.com> # dynamic slot optimisation
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201020161144.678668-1-tvrtko.ursulin@linux.intel.com
Mark the device as closed and keep references to driver data alive to
allow for safe driver unbind with active PMU clients. Perf core does not
otherwise handle this case so we have to do it manually like this.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201020100822.543332-1-tvrtko.ursulin@linux.intel.com
Rather than manually implement our own module reference counting for perf
pmu events, finally realise that there is a module parameter to struct
pmu for this very purpose.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716094643.31410-1-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 27e897beec)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Return the monotonic timestamp (ktime_get()) at the time of sampling the
busy-time. This is used in preference to taking ktime_get() separately
before or after the read seqlock as there can be some large variance in
reported timestamps. For selftests trying to ascertain that we are
reporting accurate to within a few microseconds, even a small delay
leads to the test failing.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200617130916.15261-2-chris@chris-wilson.co.uk
Conditional spinlocks make it hard for gcc and for lockdep to
follow the code flow. This one causes a warning with at least
gcc-9 and higher:
In file included from include/linux/irq.h:14,
from drivers/gpu/drm/i915/i915_pmu.c:7:
drivers/gpu/drm/i915/i915_pmu.c: In function 'i915_sample':
include/linux/spinlock.h:289:3: error: 'flags' may be used uninitialized in this function [-Werror=maybe-uninitialized]
289 | _raw_spin_unlock_irqrestore(lock, flags); \
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/i915/i915_pmu.c:288:17: note: 'flags' was declared here
288 | unsigned long flags;
| ^~~~~
Split out the part between the locks into a separate function
for readability and to let the compiler figure out what the
logic actually is.
Fixes: d79e1bd676 ("drm/i915/pmu: Only use exclusive mmio access for gen7")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200527140526.1458215-1-arnd@arndb.de
In the near future, we will utilize the busy-stats on each engine to
approximate the C0 cycles of each, and use that as an input to a manual
RPS mechanism. That entails having busy-stats always enabled and so we
can remove the enable/disable routines and simplify the pmu setup. As a
consequence of always having the stats enabled, we can also show the
current active time via sysfs/engine/xcs/active_time_ns.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429205446.3259-1-chris@chris-wilson.co.uk
Attempting to bind / unbind module from devices where we have both
integrated and discreete GPU handled by i915, will cause us to try and
double free the global state, hitting null ptr deref in free_event_attributes.
Let's move it to i915_pmu.
Fixes: 05488673a4 ("drm/i915/pmu: Support multiple GPUs")
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200219161822.24592-2-michal.winiarski@intel.com
Attempting to bind / unbind module from devices where we have both
integrated and discreete GPU handled by i915 can lead to leaks and
warnings from cpuhp:
Error: Removing state XXX which has instances left.
Let's move the state to i915_pmu.
Fixes: 05488673a4 ("drm/i915/pmu: Support multiple GPUs")
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200219161822.24592-1-michal.winiarski@intel.com
The rc6 residency starts ticking from 0 from BIOS POST, but the kernel
starts measuring the time from its boot. If we start measuruing
I915_PMU_RC6_RESIDENCY while the GT is idle, we start our sampling from
0 and then upon first activity (park/unpark) add in all the rc6
residency since boot. After the first park with the sampler engaged, the
sleep/active counters are aligned.
v2: With a wakeref to be sure
Closes: https://gitlab.freedesktop.org/drm/intel/issues/973
Fixes: df6a420535 ("drm/i915/pmu: Ensure monotonic rc6")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200114105648.2172026-1-chris@chris-wilson.co.uk
We use PCI device path in the registered PMU name in order to distinguish
between multiple GPUs. But since tools/perf reserves a special meaning to
dash and colon characters we need to transliterate them to something else.
We choose an underscore.
v2:
* Use strreplace. (Chris)
* Dashes are not good either. (Chris)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reported-by: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>
Fixes: 05488673a4 ("drm/i915/pmu: Support multiple GPUs")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200110113253.12535-1-tvrtko.ursulin@linux.intel.com
Avoid rc6 counter going backward in close to 0% RC6 scenarios like:
15.005477996 114,246,613 ns i915/rc6-residency/
16.005876662 667,657 ns i915/rc6-residency/
17.006131417 7,286 ns i915/rc6-residency/
18.006615031 18,446,744,073,708,914,688 ns i915/rc6-residency/
19.007158361 18,446,744,073,709,447,168 ns i915/rc6-residency/
20.007806498 0 ns i915/rc6-residency/
21.008227495 1,440,403 ns i915/rc6-residency/
There are two aspects to this fix.
First is not assuming rc6 value zero means GT is asleep since that can
also mean GPU is fully busy and we do not want to enter the estimation
path in that case.
Second is ensuring monotonicity on the estimation path itself. I suspect
what is happening is with extremely rapid park/unpark cycles we get no
updates on the real rc6 and therefore have to careful not to
unconditionally trust use last known real rc6 when creating a new
estimation.
v2:
* Simplify logic by not tracking the estimate but last reported value.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 16ffe73c18 ("drm/i915/pmu: Use GT parked for estimating RC6 while asleep")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> # v1
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191217142057.1000-1-tvrtko.ursulin@linux.intel.com
If the whole GT is asleep, we know that each engine must also be asleep
and so we can quickly return without checking them all.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191218000756.3475668-1-chris@chris-wilson.co.uk
Add two helpers that for reading the actual GT's frequency. The
two helpers are:
- intel_rps_read_cagf: reads the frequency and returns it not
normalized
- intel_rps_read_actual_frequency: provides the frequency in Hz.
Use the above helpers in sysfs and debugfs.
Signed-off-by: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191213183736.31992-2-andi@etezian.org
We used to report the minimum possible frequency as both requested and
active while GPU was in sleep state. This was a consequence of sampling
the value from the "current frequency" field in our software tracking.
This was strictly speaking wrong, but given that until recently the
current frequency in sleeping state used to be equal to minimum, it did
not stand out sufficiently to be noticed as such.
After some recent changes have made the current frequency be reported
as last active before GPU went to sleep, meaning both requested and active
frequencies could end up being reported at their maximum values for the
duration of the GPU idle state, it became much more obvious that this does
not make sense.
To fix this we will now sample the frequency counters only when the GPU is
awake. As a consequence reported frequencies could be reported as below
the GPU reported minimum but that should be much less confusing that the
current situation.
v2:
* Split out early exit conditions for readability. (Chris)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Closes: https://gitlab.freedesktop.org/drm/intel/issues/675
Link: https://patchwork.freedesktop.org/patch/msgid/20191129105436.20100-1-tvrtko.ursulin@linux.intel.com
Previously, we assumed we could use mutex_trylock() within an atomic
context, falling back to a worker if contended. However, such trickery
is illegal inside interrupt context, and so we need to always use a
worker under such circumstances. As we normally are in process context,
we can typically use a plain mutex, and only defer to a work when we
know we are being called from an interrupt path.
Fixes: 51fbd8de87 ("drm/i915/pmu: Atomically acquire the gt_pm wakeref")
References: a0855d24fc ("locking/mutex: Complain upon mutex API misuse in IRQ contexts")
References: https://bugs.freedesktop.org/show_bug.cgi?id=111626
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191120125433.3767149-1-chris@chris-wilson.co.uk
We report "frequencies" (actual-frequency, requested-frequency) as the
number of accumulated cycles so that the average frequency over that
period may be determined by the user. This means the units we report to
the user are Mcycles (or just M), not MHz.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191109105356.5273-1-chris@chris-wilson.co.uk
On gen7, we have to avoid concurrent access to the same mmio cacheline,
and so coordinate all mmio access with the uncore->lock. However, for
pmu, we want to avoid perturbing the system and disabling interrupts
unnecessarily, so restrict the w/a to gen7 where it is requied to
prevent machine hangs.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191108103511.20951-2-chris@chris-wilson.co.uk
We want to avoid taking forcewake when querying the performance stats,
as we wish to avoid perturbing the system under observation. (And with
the forcewake being kept alive for 1ms after use, sampling the frequency
from a 200Hz timer keeps forcewake 40% active.)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191108103511.20951-1-chris@chris-wilson.co.uk
i915_irq.c is large. One reason for this is that has a large chunk of
the GT render power management stashed away in it. Extract that logic
out of i915_irq.c and intel_pm.c and put it under one roof.
Based on a patch by Chris Wilson.
Signed-off-by: Andi Shyti <andi.shyti@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191024211642.7688-1-chris@chris-wilson.co.uk
As the GT may be running in parallel with the module initialisation
code, we may enter i915_pmu_gt_parked() as we are executing
i915_pmu_register(). We have to init the spinlock before we mark
pmu.event_init so that it is available for use by i915_pmu_gt_parked()
(which may run as soon as event_init is set).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112127
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191025165442.23356-1-chris@chris-wilson.co.uk
With discrete graphics system can have both integrated and discrete GPU
handled by i915.
Currently we use a fixed name ("i915") when registering as the uncore PMU
provider which stops working in this case.
To fix this we add the PCI device name string to non-integrated devices
handled by us. Integrated devices keep the legacy name preserving
backward compatibility.
v2:
* Detect IGP and keep legacy name. (Michal)
* Use PCI device name as suffix. (Michal, Chris)
v3:
* Constify the name. (Chris)
* Use pci_domain_nr. (Chris)
v4:
* Fix kfree_const usage. (Chris)
v5:
* kfree_const does not work for modules. (Chris)
* Changed is_igp helper to take i915.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191016093802.12483-1-tvrtko.ursulin@linux.intel.com
As we track when we put the GT device to sleep upon idling, we can use
that callback to sample the current rc6 counters and record the
timestamp for estimating samples after that point while asleep.
v2: Stick to using ktime_t
v3: Track user_wakerefs that interfere with the new
intel_gt_pm_wait_for_idle
v4: No need for parked/unparked estimation if !CONFIG_PM
v5: Keep timer park/unpark logic as was
v6: Refactor duplicated estimate/update rc6 logic
v7: Pull intel_get_pm_get_if_awake() out from the pmu->lock.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105010
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190912124813.19225-1-chris@chris-wilson.co.uk
Since d0aa694b92 ("drm/i915/pmu: Always sample an active ringbuffer")
the cost of sampling the engine state on execlists platforms became a
little bit higher when both engine busyness and one of the wait states are
being monitored. (Previously the busyness sampling on legacy platforms was
done via seqno comparison so there was no cost of mmio read.)
We can avoid that by skipping busyness sampling when engine supports
software busy stats and so avoid the cost of potential mmio read and
sample accumulation.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190911160730.22687-1-tvrtko.ursulin@linux.intel.com
Looking around the GT initialisation, we have a few log messages we
think are interesting enough present to the user (such as the amount of L4
cache) and a few to inform them of the result of actions or conflicting
HW restrictions (i.e. quirks). These are device specific messages, so
use the dev family of printk.
v2: shave off a few bytes of .rodata!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190815093604.3618-1-chris@chris-wilson.co.uk
To maintain a fast lookup from a GT centric irq handler, we want the
engine lookup tables on the intel_gt. To avoid having multiple copies of
the same multi-dimension lookup table, move the generic user engine
lookup into an rbtree (for fast and flexible indexing).
v2: Split uabi_instance cf uabi_class
v3: Set uabi_class/uabi_instance after collating all engines to provide a
stable uabi across parallel unordered construction.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> #v2
Link: https://patchwork.freedesktop.org/patch/msgid/20190806124300.24945-2-chris@chris-wilson.co.uk
Currently, we only sample if the intel_gt is awake, but we acquire our
own runtime_pm wakeref. Since intel_gt has transitioned to tracking its
own wakeref, we can atomically test and acquire that wakeref instead.
v2: Take engine->wakeref for engine sampling
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190801233616.23007-1-chris@chris-wilson.co.uk
Expose whether or not we support the PMU software tracking in our
scheduler capabilities, so userspace can query at runtime.
v2: Use I915_SCHEDULER_CAP_ENGINE_BUSY_STATS for a less ambiguous
capability name.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190703143702.11339-1-chris@chris-wilson.co.uk
Matching the underlying get/put functions.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613232156.34940-8-daniele.ceraolospurio@intel.com
Thomas Zimmermann