Calling them just "data" is too vague, call it 'perf_state', to make it
clearer, for instance, when looking at patch hunks.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-rnhk5yb05wem77rjpclrh7so@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Andi reported problems when parse errors were detected with vendor
events (json), because in the yyparse/parse_events_parse function we
dereferenced the _data parameter to two different structs, with
different layouts, which ended up making parse_events_evlist->error to
point to random stack addresses.
Fix it by making _data to always be struct parse_events_state, changing
the only place where 'struct parse_events_term' was used in
parse_events.y.
Reported-by: Andi Kleen <ak@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-bc27lshz823hxl8n9nkelcgh@git.kernel.org
Fixes: 90e2b22dee ("perf/tool: Add support to reuse event grammar to parse out terms")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename it from 'parse_events_evlist' to 'parse_events_state' to better
state that this is parsing state that has to be passed around.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-dursqtg2h2w98ztaa297u43x@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Those are just casting a void pointer to a struct to then pass them to
functions, i.e. remove the local variables and pass the void pointer
directly, the casting will be done and the code will be shorter.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-bzfodzr3mb46gy7u7v0mqad6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Special case uncore_ prefix in PMU match, to allow for shorter event
uncore specifications.
Before:
perf stat -a -e uncore_cbox/event=0x35,umask=0x1,filter_opc=0x19C/ sleep 1
After
perf stat -a -e cbox/event=0x35,umask=0x1,filter_opc=0x19C/ sleep 1
Committer tests:
# perf list uncore
List of pre-defined events (to be used in -e):
uncore_cbox_0/clockticks/ [Kernel PMU event]
uncore_cbox_1/clockticks/ [Kernel PMU event]
uncore_imc/data_reads/ [Kernel PMU event]
uncore_imc/data_writes/ [Kernel PMU event]
# perf stat -a -e cbox_0/clockticks/ sleep 1
Performance counter stats for 'system wide':
281,474,976,653,084 cbox_0/clockticks/
1.000870129 seconds time elapsed
#
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lkml.kernel.org/r/20170320201711.14142-7-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When the user specifies a pmu directly, expand it automatically with a
prefix match for all available PMUs, similar as we do for the normal
aliases now.
This allows to specify attributes for duplicated boxes quickly. For
example uncore_cbox_{0,6}/.../ can be now specified as uncore_cbox/.../
and it gets automatically expanded for all boxes.
This generally makes it more concise to write uncore specifications, and
also avoids the need to know the exact topology of the system.
Before:
% perf stat -a -e uncore_cbox_0/event=0x35,umask=0x1,filter_opc=0x19C/,\
uncore_cbox_1/event=0x35,umask=0x1,filter_opc=0x19C/,\
uncore_cbox_2/event=0x35,umask=0x1,filter_opc=0x19C/,\
uncore_cbox_3/event=0x35,umask=0x1,filter_opc=0x19C/,\
uncore_cbox_4/event=0x35,umask=0x1,filter_opc=0x19C/,\
uncore_cbox_5/event=0x35,umask=0x1,filter_opc=0x19C/ sleep 1
After:
% perf stat -a -e uncore_cbox/event=0x35,umask=0x1,filter_opc=0x19C/ sleep 1
v2: Handle all bison rules. Move multi add code to separate function.
Handle uncore_ prefix correctly.
v3: Move parse_events_multi_pmu_add to separate patch. Move uncore
prefix check to separate patch.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170320201711.14142-6-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Factor out the PMU name matching in the event parser into a separate
function, to use the same code for other grammar rules later.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170320201711.14142-5-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently we allow not to specify value for numeric terms and we set
them to value 1. This was originaly meant just for single bit terms to
allow user to type:
$ perf record -e 'cpu/cpu-cycles,any'
instead of:
$ perf record -e 'cpu/cpu-cycles,any=1'
However it works also for multi bits terms like:
$ perf record -e 'cpu/event/' ls
...
$ perf evlist -v
..., config: 0x1, ...
After discussion with Peter we decided making such term usage to fail,
like:
$ perf record -e 'cpu/event/' ls
event syntax error: 'cpu/event/'
\___ no value assigned for term
...
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1487340058-10496-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As pointed out by clang, we were not providing a prototype for a
function before using it:
util/parse-events.y:699:6: error: conflicting types for 'parse_events_error'
void parse_events_error(YYLTYPE *loc, void *data,
^
/tmp/build/perf/util/parse-events-bison.c:2224:7: note: previous implicit declaration is here
yyerror (&yylloc, _data, scanner, YY_("syntax error"));
^
/tmp/build/perf/util/parse-events-bison.c:65:25: note: expanded from macro 'yyerror'
#define yyerror parse_events_error
1 error generated.
One line fix it.
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170215130605.GC4020@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For debugging and testing it is useful to see the converted alias
string. Add support to perf stat/record and perf list to print the alias
conversion. The text string is saved in the alias structure. For perf
stat/record it is folded into the normal -v. For perf list -v was taken,
so we use --debug.
Before:
% perf list
...
cache:
l1d.replacement
[L1D data line replacements]
l1d_pend_miss.fb_full
[Cycles a demand request was blocked due to Fill Buffers inavailability]
After
% perf list --debug
...
cache:
l1d.replacement
[L1D data line replacements]
cpu/umask=0x1,period=2000003,event=0x51/
l1d_pend_miss.fb_full
[Cycles a demand request was blocked due to Fill Buffers inavailability]
cpu/umask=0x2,period=2000003,cmask=1,event=0x48/
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170128020345.19007-6-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The code for handling pmu aliases without specifying the PMU hardcoded
only supported the cpu PMU.
This patch extends it to work for all PMUs. We always duplicate the
event for all PMUs that have an matching alias. This allows to
automatically expand an alias for all instances of a PMU (so for example
you can monitor all cache boxes with a single event)
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170128020345.19007-5-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds PMU driver specific configuration to the parser
infrastructure by preceding any term with the '@' letter. As such doing
something like:
perf record -e some_event/@cfg1,@cfg2=config/ ...
will see 'cfg1' and 'cfg2=config' being added to the list of evsel
config terms. Token 'cfg1' and 'cfg2=config' are not processed in user
space and are meant to be interpreted by the PMU driver.
First the lexer/parser are supplemented with the required definitions to
recognise the driver specific configuration. From there they are simply
added to the list of event terms. The bulk of the work is done in
function "parse_events_add_pmu()" where driver config event terms are
added to a new list of driver config terms, which in turn spliced with
the event's new driver configuration list.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1473179837-3293-4-git-send-email-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The return type is not defined, so it defaults to int, however, the
function is not returning anything, so this is clearly not correct. Make
it a void function.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457008214-14393-1-git-send-email-colin.king@canonical.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In 1d55e8ef34 ("perf tools: Introduce opt_event_config nonterminal") I
removed the unconditional "'/' '/'" for pmu events such as
"intel_pt//" but forgot to use opt_event_config where it expected some
event_config, oops. Fix it.
Noticed when trying to use:
# perf record -e intel_pt// -a sleep 1
event syntax error: 'intel_pt//'
\___ parser error
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 1d55e8ef34 ("perf tools: Introduce opt_event_config nonterminal")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds the final step for BPF map configuration. A new syntax
is appended into parser so user can config BPF objects through '/' '/'
enclosed config terms.
After this patch, following syntax is available:
# perf record -e ./test_bpf_map_1.c/map:channel.value=10/ ...
It would takes effect after appling following commits.
Test result:
# cat ./test_bpf_map_1.c
/************************ BEGIN **************************/
#include <uapi/linux/bpf.h>
#define SEC(NAME) __attribute__((section(NAME), used))
struct bpf_map_def {
unsigned int type;
unsigned int key_size;
unsigned int value_size;
unsigned int max_entries;
};
static void *(*map_lookup_elem)(struct bpf_map_def *, void *) =
(void *)BPF_FUNC_map_lookup_elem;
static int (*trace_printk)(const char *fmt, int fmt_size, ...) =
(void *)BPF_FUNC_trace_printk;
struct bpf_map_def SEC("maps") channel = {
.type = BPF_MAP_TYPE_ARRAY,
.key_size = sizeof(int),
.value_size = sizeof(int),
.max_entries = 1,
};
SEC("func=sys_nanosleep")
int func(void *ctx)
{
int key = 0;
char fmt[] = "%d\n";
int *pval = map_lookup_elem(&channel, &key);
if (!pval)
return 0;
trace_printk(fmt, sizeof(fmt), *pval);
return 0;
}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
/************************* END ***************************/
- Normal case:
# ./perf record -e './test_bpf_map_1.c/map:channel.value=10/' usleep 10
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.012 MB perf.data ]
- Error case:
# ./perf record -e './test_bpf_map_1.c/map:channel.value/' usleep 10
event syntax error: '..ps:channel:value/'
\___ Config value not set (missing '=')
Hint: Valid config term:
map:[<arraymap>]:value=[value]
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
# ./perf record -e './test_bpf_map_1.c/xmap:channel.value=10/' usleep 10
event syntax error: '..pf_map_1.c/xmap:channel.value=10/'
\___ Invalid object config option
[SNIP]
# ./perf record -e './test_bpf_map_1.c/map:xchannel.value=10/' usleep 10
event syntax error: '..p_1.c/map:xchannel.value=10/'
\___ Target map not exist
[SNIP]
# ./perf record -e './test_bpf_map_1.c/map:channel.xvalue=10/' usleep 10
event syntax error: '..ps:channel.xvalue=10/'
\___ Invalid object map config option
[SNIP]
# ./perf record -e './test_bpf_map_1.c/map:channel.value=x10/' usleep 10
event syntax error: '..nnel.value=x10/'
\___ Incorrect value type for map
[SNIP]
Change BPF_MAP_TYPE_ARRAY to '1' in test_bpf_map_1.c:
# ./perf record -e './test_bpf_map_1.c/map:channel.value=10/' usleep 10
event syntax error: '..ps:channel.value=10/'
\___ Can't use this config term to this type of map
Hint: Valid config term:
map:[<arraymap>].value=[value]
(add -v to see detail)
Signed-off-by: Wang Nan <wangnan0@huawei.com>
[for parser part]
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456132275-98875-5-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To remove duplicated code that differs only in using the matching
'/a,b,c/' part or NULL if no event configuration is done ('//' or no
pair of slashes at all).
Will be used by some new targets allowing the configuration of hardware
events, etc.
Lifted part of the 'opt_event_config' nonterminal from a patch by Wang
Nan.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/n/tip-e3xzpx9cqsmwnaguaxyw6r42@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To follow convention used in other tools/perf/ areas. Also remove the
need to check if it is NULL before calling the destructor, again, to
follow convention that goes back to free().
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: He Kuang <hekuang@huawei.com>
cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/n/tip-w6owu7rb8a46gvunlinxaqwx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch provides infrastructure for passing source files to --event
directly using:
# perf record --event bpf-file.c command
This patch does following works:
1) Allow passing '.c' file to '--event'. parse_events_load_bpf() is
expanded to allow caller tell it whether the passed file is source
file or object.
2) llvm__compile_bpf() is called to compile the '.c' file, the result
is saved into memory. Use bpf_object__open_buffer() to load the
in-memory object.
Introduces a bpf-script-example.c so we can manually test it:
# perf record --clang-opt "-DLINUX_VERSION_CODE=0x40200" --event ./bpf-script-example.c sleep 1
Note that '--clang-opt' must put before '--event'.
Futher patches will merge it into a testcase so can be tested automatically.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-10-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
By introducing new rules in tools/perf/util/parse-events.[ly], this
patch enables 'perf record --event bpf_file.o' to select events by an
eBPF object file. It calls parse_events_load_bpf() to load that file,
which uses bpf__prepare_load() and finally calls bpf_object__open() for
the object files.
After applying this patch, commands like:
# perf record --event foo.o sleep
become possible.
However, at this point it is unable to link any useful things onto the
evsel list because the creating of probe points and BPF program
attaching have not been implemented. Before real events are possible to
be extracted, to avoid perf report error because of empty evsel list,
this patch link a dummy evsel. The dummy event related code will be
removed when probing and extracting code is ready.
Commiter notes:
Using it:
$ ls -la foo.o
ls: cannot access foo.o: No such file or directory
$ perf record --event foo.o sleep
libbpf: failed to open foo.o: No such file or directory
event syntax error: 'foo.o'
\___ BPF object file 'foo.o' is invalid
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
$
$ file /tmp/build/perf/perf.o
/tmp/build/perf/perf.o: ELF 64-bit LSB relocatable, x86-64, version 1 (SYSV), not stripped
$ perf record --event /tmp/build/perf/perf.o sleep
libbpf: /tmp/build/perf/perf.o is not an eBPF object file
event syntax error: '/tmp/build/perf/perf.o'
\___ BPF object file '/tmp/build/perf/perf.o' is invalid
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
$
$ file /tmp/foo.o
/tmp/foo.o: ELF 64-bit LSB relocatable, no machine, version 1 (SYSV), not stripped
$ perf record --event /tmp/foo.o sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.013 MB perf.data ]
$ perf evlist
/tmp/foo.o
$ perf evlist -v
/tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
$
So, type 1 is PERF_TYPE_SOFTWARE, config 0x9 is PERF_COUNT_SW_DUMMY, ok.
$ perf report --stdio
Error:
The perf.data file has no samples!
# To display the perf.data header info, please use --header/--header-only options.
#
$
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-4-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adds rules for parsing tracepoint names. Change rules of tracepoint which
derives from PE_NAMEs into tracepoint names directly, so adding more rules
based on tracepoint names will be easier.
Changes v2-v3:
- Change __event_legacy_tracepoint label in bison file to tracepoint_name
- Fix formats error.
Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1443412336-120050-3-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Enhancing parsing events tracepoint error output. Adding
more verbose output when the tracepoint is not found or
the tracing event path cannot be access.
$ sudo perf record -e sched:sched_krava ls
event syntax error: 'sched:sched_krava'
\___ unknown tracepoint
Error: File /sys/kernel/debug/tracing//tracing/events/sched/sched_krava not found.
Hint: Perhaps this kernel misses some CONFIG_ setting to enable this feature?.
Run 'perf list' for a list of valid events
...
$ perf record -e sched:sched_krava ls
event syntax error: 'sched:sched_krava'
\___ can't access trace events
Error: No permissions to read /sys/kernel/debug/tracing//tracing/events/sched/sched_krava
Hint: Try 'sudo mount -o remount,mode=755 /sys/kernel/debug'
Run 'perf list' for a list of valid events
...
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1441615087-13886-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pass 'struct parse_events_error *error' to the parse-event.c tracepoint
adding path. It will be filled with error data in following patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Raphael Beamonte <raphael.beamonte@gmail.com>
Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1441615087-13886-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Following commit changed parse_events_add_pmu interface:
36adec85a8 perf tools: Change parse_events_add_pmu interface
but forgot to change one caller. Because of lessen compilation rules for
the bison parser, the compiler did not warn on that.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Fixes: 36adec85a8 ("perf tools: Change parse_events_add_pmu interface")
Link: http://lkml.kernel.org/r/1441180605-24737-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Parse errors can be reported in struct parse_events_error but the
pointer passed is optional and can be NULL. Ensure it is not NULL
before dereferencing it.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Link: http://lkml.kernel.org/r/1432040746-1755-4-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Allowing symbolic events processing to report back error.
$ perf record -e 'cycles/period=krava/' ls
event syntax error: '../period=krava/'
\___ expected numeric value
$ perf record -e 'cycles/name=1/' ls
event syntax error: '..es/name=1/'
\___ expected string value
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1429729824-13932-10-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Saving the terms location within term struct, so it could be used later
for report.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1429729824-13932-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Changing parse_events_add_pmu interface to allow propagating of the
parse_events_error info.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1429729824-13932-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently bp_len is given a default value of 4. Allow user to override it:
$ perf stat -e mem:0x1000/8
^
bp_len
If no value is given, it will default to 4 as it did before.
Signed-off-by: Jacob Shin <jacob.w.shin@gmail.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: xiakaixu <xiakaixu@huawei.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Add new rules for kernel PMU event.
Currently, the patch only want to handle the PMU event name as "a-b" and
"a".
event_pmu:
PE_KERNEL_PMU_EVENT sep_dc
|
PE_PMU_EVENT_PRE '-' PE_PMU_EVENT_SUF sep_dc
PE_KERNEL_PMU_EVENT token is for
cycles-ct/cycles-t/mem-loads/mem-stores.
The prefix cycles is mixed up with cpu-cycles. loads and stores are
mixed up with cache event So they have to be hardcode in lex.
PE_PMU_EVENT_PRE and PE_PMU_EVENT_SUF tokens are for other PMU events.
The lex looks generic identifier up in the table and return the matched
token. If there is no match, generic PE_NAME token will be return.
Using the rules, kernel PMU event could use new style format without //
so you can use:
perf record -e mem-loads ...
instead of:
perf record -e cpu/mem-loads/
Signed-off-by: Kan Liang <kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1412694532-23391-4-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This enables a PMU event to be specified in the form:
pmu//
which is effectively the same as:
pmu/config=0/
This patch is a precursor to defining default config for a PMU.
Further explanation extracted from lkml thread:
Imagine that the 'tsc' term did not exist.
Intel PT trace data would not contain TSC packets, and the decoder would
not know how to decode them.
Then imagine that a new version of the hardware adds 'tsc'.
It is such a useful feature that we want it by default, but older
versions of the tools don't know how to decode it, so the kernel cannot
turn it on by default.
It is similar to why the kernel does not select perf_event_attr.mmap2 by
default.
The kernel doesn't know whether the tool supports it.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1408129739-17368-6-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Combine all definitions into a common tools/include/linux/types.h and
kill the wild growth elsewhere. Move DECLARE_BITMAP to its proper
bitmap.h header.
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Link: http://lkml.kernel.org/n/tip-azczs7qcv6h9xek9od10hiv2@git.kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Trace events potentially can have a '-' in their trace system name,
e.g. kvm on s390 defines kvm-s390:* tracepoints.
We could not parse them, because there was no rule for this:
$ sudo ./perf top -e "kvm-s390:*"
invalid or unsupported event: 'kvm-s390:*'
This patch adds an extra rule to event_legacy_tracepoint which handles
those cases. Without the patch, perf will not accept such tracepoints in
the -e option.
Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Link: http://lkml.kernel.org/r/1398440047-6641-2-git-send-email-yarygin@linux.vnet.ibm.com
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
List heads are currently allocated way down the function chain in
__add_event and add_tracepoint and then freed when the scanner code
calls parse_events_update_lists.
Be more explicit with where memory is allocated and who should free it. With
this patch the list_head is allocated in the scanner code and freed when the
scanner code calls parse_events_update_lists.
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1372793245-4136-7-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The %name-prefix "prefix" syntax is not available on bison 2.3 and
older. Substitute with the -p "prefix" command-line option for
compatibility with older versions of bison.
This patch fixes this build error with older versions of bison.
CC util/sysfs.o
BISON util/pmu-bison.c
util/pmu.y:2.14-24: syntax error, unexpected string, expecting =
make: *** [util/pmu-bison.c] Error 1
Signed-off-by: Vinson Lee <vlee@twitter.com>
Tested-by: Li Zefan <lizefan@huawei.com>
Cc: stable@vger.kernel.org # 3.4+
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Link: http://lkml.kernel.org/r/1360792138-29186-1-git-send-email-vlee@twitter.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a few of group-related field in struct perf_{evlist,evsel} so that
the group information in a evlist can be known easily. It only counts
groups which have more than 1 members since leader-only groups are
treated as non-group events.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1358845787-1350-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In tools/perf we use a convention where __ separates the struct name
from the function name for functions that operate on a struct instance.
Fix this usage by removing it from the struct names and fix also the
associated functions.
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-kdcoh7uitivx68otqcz12aaz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In tools/perf we use a convention where __ separates the struct name
from the function name for functions that operate on a struct instance.
Fix this usage by removing it from the struct parse_events_term and fix
also its associated functions.
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-h6vkql4jr7dv0096f1s6hldm@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a way to specify hw event as PMU event term like:
'cpu/event=cpu-cycles/u'
'cpu/event=instructions,.../u'
'cpu/cycles,.../u'
The 'event=cpu-cycles' term is replaced/translated by the hw events
term translation, which is exposed by sysfs 'events' group attribute.
Add parser bits, the rest is already handled by the PMU alias code.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1349873598-12583-8-git-send-email-jolsa@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
perf defines both __used and __unused variables to use for marking
unused variables. The variable __used is defined to
__attribute__((__unused__)), which contradicts the kernel definition to
__attribute__((__used__)) for new gcc versions. On Android, __used is
also defined in system headers and this leads to warnings like: warning:
'__used__' attribute ignored
__unused is not defined in the kernel and is not a standard definition.
If __unused is included everywhere instead of __used, this leads to
conflicts with glibc headers, since glibc has a variables with this name
in its headers.
The best approach is to use __maybe_unused, the definition used in the
kernel for __attribute__((unused)). In this way there is only one
definition in perf sources (instead of 2 definitions that point to the
same thing: __used and __unused) and it works on both Linux and Android.
This patch simply replaces all instances of __used and __unused with
__maybe_unused.
Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1347315303-29906-7-git-send-email-irina.tirdea@intel.com
[ committer note: fixed up conflict with a116e05 in builtin-sched.c ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use command line string provided by the -e option to name events. This
way we get unique events names that also support pmu event syntax
(<pmu_name>/<config>/<modifier>). No need to reconstruct the name
anymore from its attributes. We use the event_desc of the header to
store the name in the perf.data header. Thus it is also available for
perf report.
Implemented by putting the parser in different states to parse events or
configs.
And since event names are now generated from the command line
specification. Update event names in test cases accordingly.
Signed-off-by: Robert Richter <robert.richter@amd.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1345144224-27280-6-git-send-email-robert.richter@amd.com
[ committer note: Folded patch fixing 'perf test' failure reported by Jiri Olsa ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Just like was done for parse_events__set_leader.
Also we need to have the list_entry set_leader method in evlist.c so that we
don't grow another dep in the python binding:
# ~acme/git/linux/tools/perf/python/twatch.py
Traceback (most recent call last):
File "/home/acme/git/linux/tools/perf/python/twatch.py", line 16, in <module>
import perf
ImportError: /home/acme/git/build/perf/python/perf.so: undefined symbol: parse_events__set_leader
And also remove a pr_debug from evsel.c so that we avoid this one too:
# ~acme/git/linux/tools/perf/python/twatch.py
Traceback (most recent call last):
File "/home/acme/git/linux/tools/perf/python/twatch.py", line 16, in <module>
import perf
ImportError: /home/acme/git/build/perf/python/perf.so: undefined symbol: eprintf
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-0hk9dazg9pora9jylkqngovm@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding support to update already defined event's attribute with
event modifier. This change will allow to use group modifier as
an update to the existing event modifiers.
Adding 'add' parameter to the parse_events__modifier_event function.
Calling it with 'add' = false/true, the event modifier is
initialized/updated respectively.
Added exclude_GH flag to evsel struct, because we need to remember
if one of 'GH' modifiers was used for event. The reason is that the
default settings for exclude_guest is 1 and during the group
modifier processing we have no other way of knowing if it was set
by default or by event modifier.
Keeping the current behaviour, that any event/group modifier reset
the defaults for exclude_host (0) and exclude_guest (1).
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/n/tip-8peaey3e2qc9dwtkvzbi4wmx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding scanner/parser bits to parse event groups.
The grammar for group is:
groups: groups ',' group | group
group: group_name '{' events '}' group_mod
group_name: name | empty
group_mod: ':' group_mods | empty
group_mods: event_mod
It's possible to use standard event modifier as a modifier
for group. It'll be used as an update to existing event
modifiers.
It's necessary to use quoting ("'\) when specifying group on
command line, since {} characters are interpreted by most of
the shells.
It is now possible to specify groups in event syntax like:
'{cycles,faults}'
- anonymous group
'group1{cycles,faults}
- group with name 'group1'
'{cycles,faults}:k
- anonymous group with event modifier 'k'
'{cpu-clock,task-clock},{minor-faults,major-faults}'
- two anonymous groups
The grouping functionality itself is coming shortly.
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/n/tip-p4j8bnvo879uokum4k4zk5q6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf record fails on 32 bit with:
invalid or unsupported event: 'r40000F7E0'
Fixing this by parsing 64 bit num values.
Signed-off-by: Robert Richter <robert.richter@amd.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1344361396-7237-4-git-send-email-robert.richter@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo