This is used by SGABIOS, KVM breaks with emulate_invalid_guest_state=1.
AAM needs the source operand to be unsigned; do the same in AAD as well
for consistency, even though it does not affect the result.
Reported-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Cc: stable@vger.kernel.org # 3.9
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Nothing semantical
* simplify the alignement code by using & operation only
* rename variables clearly as paddr
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Microblaze requires to enable IRQ in cpu_idle loop.
It should be the part of this patch:
"microblaze: Use generic idle loop"
(sha1: e962bb9e9c)
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
vaddr used to index the cache was clipped from the wrong end, and thus
would potentially fail to flush the correct lines.
The problem was dorment for so long because up until the recent
optimizations it was only used for ptrace break-point only flushes.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
With the patch to support MMUv3, the base address for the loaded
binary image has changed, and a fix was applied to the U-Boot image.
This fixes the RedBoot image.
Signed-off-by: Chris Zankel <chris@zankel.net>
IRQ handlers are expected to run with IRQs disabled.
See e.g. http://lwn.net/Articles/380931/ for a longer story.
This was overlooked in the commit
2d1c645 xtensa: dispatch medium-priority interrupts
Revert to old behavior and simplify interrupt entry and exit code.
Interrupt handler still honours IRQ priority.
do_notify_resume/schedule must be called with interrupts enabled, enable
interrupts if we return from user exception.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
IRQs are disabled when PS.EXCM is set or PS.INTLEVEL is equal to or
higher than LOCKLEVEL.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
Definition of CALLER_ADDR* through __builtin_return_address makes
compiler insert calls to __xtensa_libgcc_window_spill, which in turn
makes fast_syscall_spill_registers syscall that clobbers registers when
called from the kernel mode, leading to invalid opcode exceptions on
return to userspace.
Provide definition for CALLER_ADDR0 as MAKE_PC_FROM_RA(a0, a1) and in
case CONFIG_FRAME_POINTER is enabled extract CALLER_ADDR{1-3} from
stack.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
- remove unused asm parameters;
- fix EXCM bit setting in the PS SR during _spill_registers call.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
To support FRAME_POINTER avoid using a7 in __simc (none of the existing
simcalls needs it). Replace calls to __simc with more specific
simc_read, simc_write and simc_lseek calls.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
This fixes the following build error:
arch/xtensa/kernel/built-in.o:(.init.literal+0xe8): undefined reference
to `platform_pcibios_init'
arch/xtensa/kernel/built-in.o: In function `setup_arch':
(.init.text+0x20e): undefined reference to `platform_pcibios_init'
and allows platform to omit definition of platform_pcibios_init if it's
empty.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
The Kconfig symbol KCORE_ELF was removed in v2.6.0, but reappeared in two
architectures. It is useless. Remove it again.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
Only set the register when there is at least one ibreak register,
otherwise the build fails:
arch/xtensa/kernel/head.S:105: Error: invalid register 'ibreakenable'
for 'wsr' instruction
arch/xtensa/platforms/iss/setup.c:67: Error: invalid register
'ibreakenable' for 'wsr' instruction
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
Fix access_ok macro no to permit
case where user will try to access
the last address space which is equal
to segment address.
Example:
segment addr = 0xbfff ffff
address = 0xbfff fff0
size = 0x10
Current wrong implementation
0xbfff ffff >= (0xbfff fff0 | 0x10 | (0xbfff fff0 + 0x10))
0xbfff ffff >= (0xbfff fff0 | 0xc000 0000)
0xbfff ffff >= 0xf000 0000
return 0 which is access failed even the combination is valid.
because get_fs().seq returns the last valid address.
This patch fix this problem.
Size equals to zero is valid access.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Register the irq_domain created during initialization as the default so
that device drivers can pass NULL to irq_create_mapping and get a
virtual irq to pass to request_irq.
Signed-off-by: Dan Christensen <opello@opello.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
A race condition exists when registering the first watchdog device.
Sequence of events:
- watchdog_register_device calls watchdog_dev_register
- watchdog_dev_register creates the watchdog misc device by calling
misc_register.
At that time, the matching character device (/dev/watchdog0) does not yet
exist, and old_wdd is not set either.
- Userspace gets an event and opens /dev/watchdog
- watchdog_open is called and sets wdd = old_wdd, which is still NULL,
and tries to dereference it. This causes the kernel to panic.
Seen with systemd trying to open /dev/watchdog immediately after
it was created.
Reported-by: Arkadiusz Miskiewicz <arekm@maven.pl>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Arkadiusz Miskiewicz <arekm@maven.pl>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Use the newly introduced devm_ioremap_resource() instead of
devm_request_and_ioremap() which provides more consistent error handling.
devm_ioremap_resource() provides its own error messages; so all explicit
error messages can be removed from the failure code paths.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de>
Cc: Gabor Juhos <juhosg@openwrt.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
The invalid guest state emulation loop does not check halt_request
which causes 100% cpu loop while guest is in halt and in invalid
state, but more serious issue is that this leaves halt_request set, so
random instruction emulated by vm86 #GP exit can be interpreted
as halt which causes guest hang. Fix both problems by handling
halt_request in emulation loop.
Reported-by: Tomas Papan <tomas.papan@gmail.com>
Tested-by: Tomas Papan <tomas.papan@gmail.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
CC: stable@vger.kernel.org
Signed-off-by: Gleb Natapov <gleb@redhat.com>
From: James Cosin <jkosin@intcomgrp.com>
fixes the number of digits to 6 after the decimal point to regain the
significant 0s in the frequency after the decimal point.
Signed-off-by: Steven Miao <realmz6@gmail.com>
The bootloader configures the pins, but has pull bits
set without pull enable bits. While this is harmless,
and won't do anything, it seems to cause confusion at
least for me every time looking at the pin configuration.
Fix it for DT based boot.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add GPMC data node to AM33XX device tree file.
Signed-off-by: Philip Avinash <avinashphilip@ti.com>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Pekon Gupta <pekon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
commit d16fb25 (ARM: dts: OMAP4460: Add CPU OPP table)
introduced wrong OPP voltages per OPP by mistake. Sync the OPP
tables with existing OMAP4460 OPP data in
arch/arm/mach-omap2/opp4xxx_data.c
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
commit 3027e26 (ARM: dts: OMAP36xx: Add CPU OPP table)
introduced wrong OPP voltages per OPP by mistake. Sync the OPP
tables with existing OMAP36xx OPP data in
arch/arm/mach-omap2/opp3xxx_data.c
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Boards supported upstream all use TWL6040 as audio codec, enable the common
ASoC machine driver by default for them.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add support for chip id detection of AM335x PG2.1 Silicon.
Currently omap3xxx_check_revision() detects PG1.0 and PG2.0 only,
this patch extends it by adding PG2.1 Si support.
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The patch adds support for fan control button on Ideapad Z580. This is
the same button as on Z570, but it raises different bit in
VPCCMD_R_SPECIAL_BUTTONS. Also add message to dmesg when unknown button
press detected, it will help adding support for new special buttons.
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Tested-by: Ivan Vojtko <nekroman.sk@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
pvpanic device is a qemu simulated device through which guest panic
event is sent to host.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
BugLink: http://bugs.launchpad.net/bugs/1172151
Need to set wapf to 4 for ASUSTeK COMPUTER INC. X75A, so that
user can toggle wifi function through function key correctly.
Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Used PTR_RET function instead of IS_ERR and PTR_ERR.
Patch found using coccinelle.
Signed-off-by: Alexandru Gheorghiu <gheorghiuandru@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
SVS151290S series uses handle 0x0163 for keyboard backlight and 0x015B for the graphics switch.
Signed-off-by: Arthur Wirski <awirski@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
New HP laptops start generating new events, and hp-wmi prints unknown
event_ids for them. This patch also removes these messages
Signed-off-by: Alex Hung <alex.hung@canonical.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
If krealloc() returns NULL, it *doesn't* free the original. So any code
of the form 'foo = krealloc(foo, …);' is almost certainly a bug.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Paolo Bonzini