Original plan was to implement driver as one file per used demod
standard (mn88472_c.c, mn88472_t.c and mn88472_t2.c). However, that
plan was a mistake as driver code differences are so small between
different standards. Due to that rename this file and implement all
the needed functionality to that file.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
400ms delay seems to be enough in order to gain DVB-C lock.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Wrong symbol name causes demod attach failure.
Reported-by: Benjamin Larsson <benjamin@southpole.se>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Only DVB-C mode is supported, DVB-T and DVB-T2 are not supported.
Very much feature reduced version, no signal statistics nor normal
chip configuration options.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
It is wrong that sp2 device uses the i2c adapter from m88ds3103 return.
sp2 device sits on the same i2c bus with m88ds3103, not behind m88ds3103.
Signed-off-by: Nibble Max <nibble.max@gmail.com>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
1> When m88ds3103 works in serial ts mode, its serial ts clock is equal to ts master clock and the clock divider is bypassed.
2> The serial ts clock is configed by the bridge driver just like parallel ts clock.
Signed-off-by: Nibble Max <nibble.max@gmail.com>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Fix many sparse warnings:
drivers/media/pci/saa7164/saa7164-core.c:97:18: warning: cast removes address space of expression
drivers/media/pci/saa7164/saa7164-core.c:122:31: warning: cast removes address space of expression
drivers/media/pci/saa7164/saa7164-core.c:122:31: warning: incorrect type in initializer (different address spaces)
drivers/media/pci/saa7164/saa7164-core.c:122:31: expected unsigned char [noderef] [usertype] <asn:2>*bufcpu
drivers/media/pci/saa7164/saa7164-core.c:122:31: got unsigned char [usertype] *<noident>
drivers/media/pci/saa7164/saa7164-core.c:282:44: warning: cast removes address space of expression
drivers/media/pci/saa7164/saa7164-core.c:286:38: warning: cast removes address space of expression
drivers/media/pci/saa7164/saa7164-core.c:286:35: warning: incorrect type in assignment (different address spaces)
drivers/media/pci/saa7164/saa7164-core.c:286:35: expected unsigned char [noderef] [usertype] <asn:2>*p
drivers/media/pci/saa7164/saa7164-core.c:286:35: got unsigned char [usertype] *<noident>
drivers/media/pci/saa7164/saa7164-core.c:352:44: warning: cast removes address space of expression
drivers/media/pci/saa7164/saa7164-core.c:527:53: warning: cast removes address space of expression
drivers/media/pci/saa7164/saa7164-core.c:129:30: warning: dereference of noderef expression
drivers/media/pci/saa7164/saa7164-core.c:133:38: warning: dereference of noderef expression
drivers/media/pci/saa7164/saa7164-core.c:133:72: warning: dereference of noderef expression
drivers/media/pci/saa7164/saa7164-core.c:134:35: warning: dereference of noderef expression
drivers/media/pci/saa7164/saa7164-core.c:287:61: warning: dereference of noderef expression
drivers/media/pci/saa7164/saa7164-core.c:288:65: warning: dereference of noderef expression
drivers/media/pci/saa7164/saa7164-core.c:289:65: warning: dereference of noderef expression
drivers/media/pci/saa7164/saa7164-core.c:290:65: warning: dereference of noderef expression
drivers/media/pci/saa7164/saa7164-core.c:291:65: warning: dereference of noderef expression
drivers/media/pci/saa7164/saa7164-core.c:292:65: warning: dereference of noderef expression
drivers/media/pci/saa7164/saa7164-core.c:293:65: warning: dereference of noderef expression
drivers/media/pci/saa7164/saa7164-core.c:294:65: warning: dereference of noderef expression
drivers/media/pci/saa7164/saa7164-fw.c:548:52: warning: incorrect type in argument 5 (different address spaces)
drivers/media/pci/saa7164/saa7164-fw.c:548:52: expected unsigned char [usertype] *dst
drivers/media/pci/saa7164/saa7164-fw.c:548:52: got unsigned char [noderef] [usertype] <asn:2>*
drivers/media/pci/saa7164/saa7164-fw.c:579:44: warning: incorrect type in argument 5 (different address spaces)
drivers/media/pci/saa7164/saa7164-fw.c:579:44: expected unsigned char [usertype] *dst
drivers/media/pci/saa7164/saa7164-fw.c:579:44: got unsigned char [noderef] [usertype] <asn:2>*
drivers/media/pci/saa7164/saa7164-fw.c:597:44: warning: incorrect type in argument 5 (different address spaces)
drivers/media/pci/saa7164/saa7164-fw.c:597:44: expected unsigned char [usertype] *dst
drivers/media/pci/saa7164/saa7164-fw.c:597:44: got unsigned char [noderef] [usertype] <asn:2>*
drivers/media/pci/saa7164/saa7164-bus.c:36:36: warning: cast removes address space of expression
drivers/media/pci/saa7164/saa7164-bus.c:41:36: warning: cast removes address space of expression
drivers/media/pci/saa7164/saa7164-bus.c:151:19: warning: incorrect type in assignment (different base types)
drivers/media/pci/saa7164/saa7164-bus.c:151:19: expected unsigned short [unsigned] [usertype] size
drivers/media/pci/saa7164/saa7164-bus.c:151:19: got restricted __le16 [usertype] <noident>
drivers/media/pci/saa7164/saa7164-bus.c:152:22: warning: incorrect type in assignment (different base types)
drivers/media/pci/saa7164/saa7164-bus.c:152:22: expected unsigned int [unsigned] [usertype] command
drivers/media/pci/saa7164/saa7164-bus.c:152:22: got restricted __le32 [usertype] <noident>
drivers/media/pci/saa7164/saa7164-bus.c:153:30: warning: incorrect type in assignment (different base types)
drivers/media/pci/saa7164/saa7164-bus.c:153:30: expected unsigned short [unsigned] [usertype] controlselector
drivers/media/pci/saa7164/saa7164-bus.c:153:30: got restricted __le16 [usertype] <noident>
drivers/media/pci/saa7164/saa7164-bus.c:172:20: warning: cast to restricted __le32
drivers/media/pci/saa7164/saa7164-bus.c:173:20: warning: cast to restricted __le32
drivers/media/pci/saa7164/saa7164-bus.c:206:28: warning: cast to restricted __le32
drivers/media/pci/saa7164/saa7164-bus.c:287:9: warning: incorrect type in argument 1 (different base types)
drivers/media/pci/saa7164/saa7164-bus.c:287:9: expected unsigned int [unsigned] val
drivers/media/pci/saa7164/saa7164-bus.c:287:9: got restricted __le32 [usertype] <noident>
drivers/media/pci/saa7164/saa7164-bus.c:339:20: warning: cast to restricted __le32
drivers/media/pci/saa7164/saa7164-bus.c:340:20: warning: cast to restricted __le32
drivers/media/pci/saa7164/saa7164-bus.c:463:9: warning: incorrect type in argument 1 (different base types)
drivers/media/pci/saa7164/saa7164-bus.c:463:9: expected unsigned int [unsigned] val
drivers/media/pci/saa7164/saa7164-bus.c:463:9: got restricted __le32 [usertype] <noident>
drivers/media/pci/saa7164/saa7164-bus.c:466:21: warning: cast to restricted __le16
drivers/media/pci/saa7164/saa7164-bus.c:467:24: warning: cast to restricted __le32
drivers/media/pci/saa7164/saa7164-bus.c:468:32: warning: cast to restricted __le16
drivers/media/pci/saa7164/saa7164-buffer.c:122:18: warning: incorrect type in assignment (different address spaces)
drivers/media/pci/saa7164/saa7164-buffer.c:122:18: expected unsigned long long [noderef] [usertype] <asn:2>*cpu
drivers/media/pci/saa7164/saa7164-buffer.c:122:18: got void *
drivers/media/pci/saa7164/saa7164-buffer.c:127:21: warning: incorrect type in assignment (different address spaces)
drivers/media/pci/saa7164/saa7164-buffer.c:127:21: expected unsigned long long [noderef] [usertype] <asn:2>*pt_cpu
drivers/media/pci/saa7164/saa7164-buffer.c:127:21: got void *
drivers/media/pci/saa7164/saa7164-buffer.c:134:20: warning: cast removes address space of expression
drivers/media/pci/saa7164/saa7164-buffer.c:156:63: warning: incorrect type in argument 3 (different address spaces)
drivers/media/pci/saa7164/saa7164-buffer.c:156:63: expected void *vaddr
drivers/media/pci/saa7164/saa7164-buffer.c:156:63: got unsigned long long [noderef] [usertype] <asn:2>*cpu
drivers/media/pci/saa7164/saa7164-buffer.c:179:57: warning: incorrect type in argument 3 (different address spaces)
drivers/media/pci/saa7164/saa7164-buffer.c:179:57: expected void *vaddr
drivers/media/pci/saa7164/saa7164-buffer.c:179:57: got unsigned long long [noderef] [usertype] <asn:2>*cpu
drivers/media/pci/saa7164/saa7164-buffer.c:180:56: warning: incorrect type in argument 3 (different address spaces)
drivers/media/pci/saa7164/saa7164-buffer.c:180:56: expected void *vaddr
drivers/media/pci/saa7164/saa7164-buffer.c:180:56: got unsigned long long [noderef] [usertype] <asn:2>*pt_cpu
drivers/media/pci/saa7164/saa7164-buffer.c:84:17: warning: dereference of noderef expression
drivers/media/pci/saa7164/saa7164-buffer.c:147:31: warning: dereference of noderef expression
drivers/media/pci/saa7164/saa7164-buffer.c:148:17: warning: dereference of noderef expression
Most are caused by pointers marked as __iomem when they aren't or not marked as
__iomem when they should.
Also note that readl/writel already do endian conversion, so there is no need to
do it again.
saa7164_bus_set/get were a bit tricky: you have to make sure the msg endian
conversion is done at the right time, and that the code isn't using fields that
are still little endian instead of cpu-endianness.
The approach chosen is to convert just before writing to the ring buffer
and to convert it back right after reading from the ring buffer.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
In order to have v4l2-compliance tool pass the G/S_EDID some modifications
where needed in the driver.
In particular, the edid.reserved zone must be blanked.
Based on a patch from Jean-Michel Hautbois <jean-michel.hautbois@vodalys.com>,
but reworked it a bit. It should use 'data' (which depends on edid.present)
instead of edid.blocks as the check whether edid data is present.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This fixes the v4l2-compliance failures.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Make this pass the v4l2-compliance test.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
we are getting struct clk using clk_get before calling
clk_prepare_enable. but if clk_prepare_enable fails, then we are
jumping to fail_mutex_unlock where we are just unlocking the mutex,
but we are not freeing the clock source.
this patch just adds a call to clk_put before jumping to
fail_mutex_unlock.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Add array controls to test support for such controls. There is one
array with just one element, one 8x16 matrix control and one 4 dimensional
2x3x4x5 control.
This makes it possible to experiment with such controls without requiring
hard-to-get hardware.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
qlock spinlock controls access to buf_list and sequence.
qlock spinlock should not be locked during a copy to video buffers, an
operation that may sleep.
Signed-off-by: Dean Anderson <linux-dev@sensoray.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
It makes no sense to block the SOLO_IRQ_ENCODER interrupt from being sent while
processing an earlier interrupt. New interrupts will just kick the thread
again once it is done processing.
Signed-off-by: Andrey Utkin <andrey.krieger.utkin@gmail.com>
[hans.verkuil@cisco.com: fix commit description]
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Before, it was called from individual encoder (de)init procedures, which
lead to spare threads running (which were actually lost, leaked).
The current fix uses trivial approach, and the downside is that the
processing thread is working always, even when there's no consumer.
Signed-off-by: Andrey Utkin <andrey.krieger.utkin@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Precedence of & and >> is not the same and is not left to right.
shift has higher precedence and should be done after the mask.
This use has a mask then shift which is not the normal style.
Move the shift before the mask to match nearly all the other
uses in kernel.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
this patch adds support for vidioc_create_bufs. Along side
remove unneeded member numbuffers.
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This patch move the loop_thru configuration to the attach function,
because with dual tuners until loop_tru configuration the other tuner
don't work.
Signed-off-by: Jose Alberto Reguero <jareguero@telefonica.net>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This patch move the soft reset to the attach function because with dual
tuners, when one tuner do reset, the other one is perturbed, and the
stream has errors.
Signed-off-by: Jose Alberto Reguero <jareguero@telefonica.net>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Needed due to some important regression fixes at RC core.
* commit 'v3.18-rc4': (587 commits)
Linux 3.18-rc4
ARM: dts: zynq: Enable PL clocks for Parallella
tiny: rename ENABLE_DEV_COREDUMP to ALLOW_DEV_COREDUMP
tiny: reverse logic for DISABLE_DEV_COREDUMP
i2c: core: Dispose OF IRQ mapping at client removal time
i2c: at91: don't account as iowait
i2c: remove FSF address
USB: Update default usb-storage delay_use value in kernel-parameters.txt
sysfs: driver core: Fix glue dir race condition by gdp_mutex
MIPS: Fix build with binutils 2.24.51+
xfs: track bulkstat progress by agino
xfs: bulkstat error handling is broken
xfs: bulkstat main loop logic is a mess
xfs: bulkstat chunk-formatter has issues
xfs: bulkstat chunk formatting cursor is broken
xfs: bulkstat btree walk doesn't terminate
mm: Fix comment before truncate_setsize()
USB: cdc-acm: add quirk for control-line state requests
tty: Fix pty master poll() after slave closes v2
MIPS: R3000: Fix debug output for Virtual page number
...
Conflicts:
drivers/media/rc/rc-main.c
move the return to happen before the logic. This way, we can
avoid one extra identation.
This also fixes an identation issue on this function.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
It is hard to read what's there, because it doesn't follow the
CodingStyle.
Add missing whitespaces to split function arguments.
No functional changes.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This is actually a false positive:
drivers/media/dvb-frontends/cx24110.c:210 cx24110_set_fec() error: buffer overflow 'rate' 7 <= 8
But fixing it is easy: just ensure that the table size will be
limited to FEC_AUTO.
While here, fix spacing on the affected lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
As reported by spatch:
drivers/media/dvb-frontends/stb0899_drv.c:720 stb0899_send_diseqc_msg() error: buffer overflow 'cmd->msg' 6 <= 7
The buffer size is 6 and not 8. Anyway, the best is to use sizeof(),
to avoid such mistakes.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
As reported by smatch:
drivers/media/rc/rc-main.c:1426 rc_register_device() warn: should '1 << rc_map->rc_type' be a 64 bit type?
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
As sparse complains:
drivers/media/dvb-frontends/stv090x.c:3471:30: warning: mixing different enum types
drivers/media/dvb-frontends/stv090x.c:3471:30: int enum fe_delivery_system versus
drivers/media/dvb-frontends/stv090x.c:3471:30: int enum stv090x_delsys
There's actually an error when setting the delivery system on
stv090x_search(): it is using the DVBv5 macros as if they were
the stv090x ones.
Instead, we should convert between the two namespaces, returning
an error if an unsupported delivery system is requested.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
stk1160-v4l.c:478:49: warning: incorrect type in argument 3 (different base types)
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
smipcie.c:950:31: warning: Using plain integer as NULL pointer
smipcie.c:973:31: warning: Using plain integer as NULL pointer
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
videobuf-core.c:834:23: warning: Using plain integer as NULL pointer
videobuf-core.c:851:28: warning: Using plain integer as NULL pointer
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
bttv-cards.c:3874:55: warning: incorrect type in initializer (different base types)
Also clean up the code a little by adding spaces.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Both sides of these assignments actually have type "const struct
vb2_mem_ops *", so the casts are unnecessary and slightly confusing.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Userspace expects to see a long space before the first pulse is sent on
the lirc device. Currently, if a long time has passed and a new packet
is started, the lirc codec just returns and doesn't send anything. This
makes lircd ignore many perfectly valid signals unless they are sent in
quick sucession. When a reset event is delivered, we cannot know
anything about the duration of the space. But it should be safe to
assume it has been a long time and we just set the duration to maximum.
Signed-off-by: Austin Lund <austin.lund@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
That case is not IO error, so better to jump out now, but still
continue polling.
Cc: Bimow Chen <Bimow.Chen@ite.com.tw>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Previous patch changed both AF9030 and IT9130 SNR reporting from
dB to relative. Restore AF9030 to old behavior as it has been always
returning 0.1 dB value. Leave IT9130 relative as old IT9130 was
returning relative values.
Cc: Bimow Chen <Bimow.Chen@ite.com.tw>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Snr returns value not correct. Fix it.
Signed-off-by: Bimow Chen <Bimow.Chen@ite.com.tw>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Check return status after each register access routine and avoid
masking return status values.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Previous patch changes used signal strength firmware register from
0x800048 to 0x80004a in case of AF9033/AF9035 chip. In practice
reported values were running upside-down, when RR strength increases
reported value decreases and vice versa. That is because of 0x80004a
returns values that are dBm scale, but negative RF strength dBm
returned as positive number.
0x800048 returns 0-100, like percentage
0x80004a returns 0-255 dBm, without a negative sign
So restore old measurement now.
Cc: Bimow Chen <Bimow.Chen@ite.com.tw>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Register 0x800048 is not dB measure but relative scale. Fix it and conform to NorDig specifications.
Signed-off-by: Bimow Chen <Bimow.Chen@ite.com.tw>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
It repeated "found a 'Silicon Labs Si2168' in warm state" everytime
when device was opened. Message is aimed to point out firmware is
downloaded, up and running. So print it only in case firmware download
is performed.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Patch "[media] media: Print information on failed link validation" cause a
harmless compiler warning in printing a debug message. Fix this.
The type casting is done do ensure the type really is suitable for printing
as %u, as find_first_zero_bit() does return int on some architectures and
unsigned long on others.
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
drivers/media/dvb-frontends/sp2.c:269:5: sparse: symbol 'sp2_init' was not declared. Should it be static?
drivers/media/dvb-frontends/sp2.c:351:5: sparse: symbol 'sp2_exit' was not declared. Should it be static?
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
As reported by kbuild test robot:
drivers/media/usb/cx231xx/cx231xx-audio.c:445:16-20: ERROR: dev is NULL but dereferenced.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
M88RS6000 is the integrated chip, which includes tuner and demod. Its
internal demod is similar with M88DS3103 except some registers
definition.
The main different part of this internal demod from others is its
clock/pll generation IP block sitting inside the tuner die. So clock/pll
functions should be configed through its tuner i2c bus, NOT its demod
i2c bus.
The demod of M88RS6000 need the firmware: dvb-demod-m88rs6000.fw
firmware download link:
http://www.dvbsky.net/download/linux/dvbsky-firmware.tar.gz
Signed-off-by: Nibble Max <nibble.max@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
M88RS6000 is the integrated chip, which includes tuner and demod.
Here splite its tuner as a standalone driver.
.set_config is used to config its demod clock, which sits inside tuner die.
Signed-off-by: Nibble Max <nibble.max@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
There is a new PCIe bridge chip(from SMI) used in DVBSky V3 seris cards, include S950 V3 and S952 V3 cards.
SMI pcie bridge chip is PCIe 1.1 compliant, supports MSI feature.
Main interface blocks:
1>Two DVB transport stream input ports(ts0,ts1).
2>Two I2C master bus(i2c0, i2c1).
3>IR controller.
4>reset pins and other GPIOs.
DVBSky S950 V3 card has a single channel of dvb-s/s2.
1>Frontend: tuner: M88TS2022, demod: M88DS3103
2>PCIe bridge: SMI PCIe
The current driver does not support SMI IR function.
[mchehab@osg.samsung.com: fix Makefile to find m88ts2022.h]
Signed-off-by: Max nibble <nibble.max@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
If alloc_workqueue() fails, we should go to the 'err_v4l2_register' label, which
will unregister the v4l2 device.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Instead of calling v4l2_device_unregister() in multiple locations within the
error paths, let's call it from a single location to make the error handling
simpler.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
X-Patchwork-Delegate: m.chehab@samsung.com
As pointed by smatch:
drivers/media/pci/cx23885/cx23885-dvb.c:1066 dvb_register() error: we previously assumed 'fe0->dvb.frontend' could be null (see line 1060)
drivers/media/pci/cx23885/cx23885-dvb.c:1990 cx23885_dvb_register() error: we previously assumed 'fe0' could be null (see line 1975)
What happens is that the error handling logic when a frontend
register fails sometimes keep doing the work, as if it didn't
fail.
This could potentially cause an OOPS. So, simplify the logic
a little bit and return an error if frontend fails before
trying to setup VB2 queue.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
TechnoTrend CT2-4500 CI is a PCIe device with DVB-T2/C tuner. It is
similar to DVBSky T980C, just with different PCI ID and remote controller.
Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The update was supplied directly by PCTV.
Add tuner ids 182-188.
Add audproc ids 45-52.
Add decoder chip ids 43-53.
Use 32bits for the serial number.
Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Unfortunately, on devices that have multiple interfaces, udev->dev
points to the parent device (usb) instead of the cx231xx specific one.
Due to that the logs don't look too nice, as they'll print messages
as if they were produced by USB core:
usb-1-2: New device Conexant Corporation Polaris AV Capturb @ 480 Mbps (1554:5010) with 7 interfaces
Instead of using the name of the parent device, let's use the name
of the first cx231xx interface for all cx231xx sub-modules.
With this path, the logs will be nicer:
cx231xx 1-2:1.1: New device Conexant Corporation Polaris AV Capturb @ 480 Mbps (1554:5010) with 7 interfaces
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Don't need to show when it starts or stops. Just print lines
when devices are found.
After the changes, the output for i2c scan will be like:
usb 1-2: i2c scan: found device @ port 0 addr 0x40 [???]
usb 1-2: i2c scan: found device @ port 0 addr 0x60 [colibri]
usb 1-2: i2c scan: found device @ port 0 addr 0x88 [hammerhead]
usb 1-2: i2c scan: found device @ port 0 addr 0x98 [???]
usb 1-2: i2c scan: found device @ port 3 addr 0xa0 [eeprom]
usb 1-2: i2c scan: found device @ port 2 addr 0x60 [colibri]
usb 1-2: i2c scan: found device @ port 2 addr 0xc0 [tuner]
usb 1-2: i2c scan: found device @ port 4 addr 0x20 [demod]
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Now that we're using dev_foo, the logs become like:
usb 1-2: DVB: registering adapter 0 frontend 0 (Fujitsu mb86A20s)...
usb 1-2: Successfully loaded cx231xx-dvb
cx231xx: Cx231xx dvb Extension initialized
It is not clear, by the logs, that usb 1-2 name is an alias for
cx231xx. So, we also need to use dvb_info() at extension load/unload.
After the patch, it will print:
usb 1-2: Cx231xx dvb Extension initialized
With is coherent with the other logs.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
There are several places at cx231xx that uses printk without
any special reason. Change all of them to use dev_foo().
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Now cx231xx_i2c_check_for_device works like i2c_check_for_device of em28xx driver.
For me this fixes scanning of all ports but port 2.
Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
There's no reason to report:
cx25840 7-0044: Firmware download size changed to 16 bytes max length
If the driver needs to adjust the buffer's maximum size.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
There are lots of debug printks printed with pr_info. Also, the
printk's data are not too coherent:
- there are duplicated driver name at the print format;
- function name format string differs from function to function;
- long strings broken into multiple lines;
- some printks just produce ugly reports, being almost useless
as-is.
Do a cleanup on that.
Still, there are much to be done in order to do a better printk
job on this driver, but, at least it will now be a way less
verbose, if debug printks are disabled, and some logs might
actually be useful.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
One of the identation blocks is wrong. Fix it.
While here, replace pr_info by pr_debug inside such block and
add the function name to the print messages, as otherwise they
will not help much.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
It currently does just like what pr_foo() macros do. So,
replace them.
A deeper cleanup is needed, as there are lots of debug macros
printed with pr_info.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
X-Patchwork-Delegate: m.chehab@samsung.com
on avr32 arch, those warnings happen:
drivers/media/firewire/firedtv-fw.c: In function 'node_update':
drivers/media/firewire/firedtv-fw.c:329: warning: comparison is always true due to limited range of data type
In this particular case, the signal is desired, as the isochannel
var can be initalized with -1 inside the driver.
So, change the type to s8, to avoid issues on archs where char
is unsigned.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Reviewed-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Similar to an earlier patch, fixing reading user-space data for the
VIDIOC_CREATE_BUFS ioctl() in 32-bit compatibility mode, this patch fixes
writing back of the possibly modified struct to the user. However, unlike
the former bug, this one is much less harmful, because it only results in
the kernel failing to write the .type field back to the user, but in fact
this is likely unneeded, because the kernel will hardly want to change
that field. Therefore this bug is more of a theoretical nature.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This code is needlessly complicated and checkpatch.pl complains that we
go over the 80 characters per line limit.
If we flip the "if (!lock) {" test to "if (lock) return;" then we can
remove an indent level from the rest of the function.
We can add two returns in the "if (state->srate >= 10000000) {"
condition and move the else statement back an additional indent level.
There is another "if (!lock) {" check which can be removed since we have
already checked "lock" and know it is zero at this point. This second
check on "lock" is also a problem because it sets off a static checker
warning. I have reviewed this code for some time to see if something
else was intended, but have concluded that it was simply an oversight
and should be removed. Removing this duplicative check gains us an
third indent level.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
After updating the kernel to 3.14.15 I am seeing these messages:
[273684.964081] saa7146: saa7146 (0): saa7146_wait_for_debi_done_sleep
timed out while waiting for registers getting programmed
[273690.020061] saa7146: saa7146 (0): saa7146_wait_for_debi_done_sleep
timed out while waiting for registers getting programmed
[273695.076082] saa7146: saa7146 (0): saa7146_wait_for_debi_done_sleep
timed out while waiting for registers getting programmed
[273700.132077] saa7146: saa7146 (0): saa7146_wait_for_debi_done_sleep
timed out while waiting for registers getting programmed
[273705.188070] saa7146: saa7146 (0): saa7146_wait_for_debi_done_sleep
timed out while waiting for registers getting programmed
[273710.244066] saa7146: saa7146 (0): saa7146_wait_for_debi_done_sleep
timed out while waiting for registers getting programmed
[273715.300187] saa7146: saa7146 (0): saa7146_wait_for_debi_done_sleep
timed out while waiting for registers getting programmed
[273720.356068] saa7146: saa7146 (0): saa7146_wait_for_debi_done_sleep
timed out while waiting for registers getting programmed
[273725.412188] saa7146: saa7146 (0): saa7146_wait_for_debi_done_sleep
timed out while waiting for registers getting programmed
[273730.468094] saa7146: saa7146 (0): saa7146_wait_for_debi_done_sleep
timed out while waiting for registers getting programmed
[273735.524070] saa7146: saa7146 (0): saa7146_wait_for_debi_done_sleep
timed out while waiting for registers getting programmed
[273740.580176] saa7146: saa7146 (0): saa7146_wait_for_debi_done_sleep
timed out while waiting for registers getting programmed
filling up the logs(one about every 5 seconds).
Other posts suggests that it is not actually an error on cards without a
CI interface. Here's a patch that turns it into a debug message, so it
does not clobber the logs.
Signed-off-by: Johann Klammer <klammerj@a1.net>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The default used to be that the first vivid device instance was
single planar, the second multi planar, the third single planar, etc.
However, that turned out to be unexpected and awkward. Change the
driver to always default to single planar.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
It's better to use TS_SC instead of magic number 0xC0.
[m.chehab@samsung.com: patch rebased and message rewritten, as this
patch conflicted with an already applied patch]
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The Media controller doesn't tell much to the user in cases such as pipeline
startup failure. The link validation is the most common media graph (or in
V4L2's case, format) related reason for the failure. In more complex
pipelines the reason may not always be obvious to the user, so point them to
look at the right direction.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Precedence of & and >> is not the same and is not left to right.
shift has higher precedence and should be done after the mask.
Add parentheses around the mask.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
There is a new version of the TechnoTrend CT2-4400 USB tuner. The difference is the demodulator that is used (Si2168-B40 instead of -A30).
For TT CT2-4400v2 a TS stream related parameter needs to be set, otherwise the stream becomes corrupted. The Windows driver for both CT2-4400 and CT2-4400v2 sets this as well. After this patch the driver works for both versions.
Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Improves lock performance with signals from the ZeeVee family
of modulators.
Signed-off-by: Richard Vollkommer <linux@hauppauge.com>
Cc: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Michael Ira Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Adds control of the IF output level to the xc5000 tuner
configuration structure. Increases the IF level to the
demodulator to fix failure to lock and picture breakup
issues (with the au8522 demodulator, in the case of the
Hauppauge HVR950Q).
This patch works with all XC5000 firmware versions.
Signed-off-by: Richard Vollkommer <linux@hauppauge.com>
Signed-off-by: Michael Ira Krufky <mkrufky@linuxtv.org>
Reviewed-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This is a complete re-write inspired by the original lirc driver.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
if "chip_id" is wrong or "dev->cfg.clock_out" is invalid, the i2c model is still loaded.
It will cause "kernel NULL pointer dereference" oops when the i2c model remove.
returning the err code will prevent the i2c model load.
Signed-off-by: Nibble Max <nibble.max@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Leadtek VC100 is a simple USB capture stick, similar to
Yakumo Movie Mixer.
Signed-off-by: Witold Krecicki <wpk+lkml@culm.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Add an option to disable remote controller for DVBSky devices by specifying
the disable_rc option at modprobe.
Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
dev_err includes the function name in the log printout, so there is no need to include it manually. While here, fix a small grammatical error in the i2c error message.
Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Antti Palosaari