Boris Ostrovsky reported a memory leak with device passthrough when SME
is active.
The VFIO driver uses iommu_iova_to_phys() to get the physical address for
an iova. This physical address is later passed into vfio_unmap_unpin() to
unpin the memory. The vfio_unmap_unpin() uses pfn_valid() before unpinning
the memory. The pfn_valid() check was failing because encryption mask was
part of the physical address returned. This resulted in the memory not
being unpinned and therefore leaked after the guest terminates.
The memory encryption mask must be cleared from the physical address in
iommu_iova_to_phys().
Fixes: 2543a786aa ("iommu/amd: Allow the AMD IOMMU to work with memory encryption")
Reported-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: <iommu@lists.linux-foundation.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: kvm@vger.kernel.org
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: <stable@vger.kernel.org> # 4.14+
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
ACPI HID devices do not actually have an alias for
them in the IVRS. But dev_data->alias is still used
for indexing into the IOMMU device table for devices
being handled by the IOMMU. So for ACPI HID devices,
we simply return the corresponding devid as an alias,
as parsed from IVRS table.
Signed-off-by: Arindam Nath <arindam.nath@amd.com>
Fixes: 2bf9a0a127 ('iommu/amd: Add iommu support for ACPI HID devices')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Pasid table memory allocation could return failure due to memory
shortage. Limit the pasid table size to 1MiB because current 8MiB
contiguous physical memory allocation can be hard to come by. W/o
a PASID table, the device could continue to work with only shared
virtual memory impacted. So, let's go ahead with context mapping
even the memory allocation for pasid table failed.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107783
Fixes: cc580e4126 ("iommu/vt-d: Per PCI device pasid table interfaces")
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Reported-and-tested-by: Pelton Kyle D <kyle.d.pelton@intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In the iommu's shutdown handler we disable runtime-pm which could
result in the irq-handler running unclocked and since commit
3fc7c5c0cf ("iommu/rockchip: Handle errors returned from PM framework")
we warn about that fact.
This can cause warnings on shutdown on some Rockchip machines, so
free the irqs in the shutdown handler before we disable runtime-pm.
Reported-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Fixes: 3fc7c5c0cf ("iommu/rockchip: Handle errors returned from PM framework")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
A couple of late-merged changes that would be useful to get in this
merge window:
- Driver support for reset of audio complex on Meson platforms. The
audio driver went in this merge window, and these changes have been
in -next for a while (just not in our tree).
- Power management fixes for IOMMU on Rockchip platforms, getting
closer to kexec working on them, including Chromebooks.
- Another pass updating "arm,psci" -> "psci" for some properties that
have snuck in since last time it was done.
-----BEGIN PGP SIGNATURE-----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=dQaG
-----END PGP SIGNATURE-----
Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC late updates from Olof Johansson:
"A couple of late-merged changes that would be useful to get in this
merge window:
- Driver support for reset of audio complex on Meson platforms. The
audio driver went in this merge window, and these changes have been
in -next for a while (just not in our tree).
- Power management fixes for IOMMU on Rockchip platforms, getting
closer to kexec working on them, including Chromebooks.
- Another pass updating "arm,psci" -> "psci" for some properties that
have snuck in since last time it was done"
* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
iommu/rockchip: Move irq request past pm_runtime_enable
iommu/rockchip: Handle errors returned from PM framework
arm64: rockchip: Force CONFIG_PM on Rockchip systems
ARM: rockchip: Force CONFIG_PM on Rockchip systems
arm64: dts: Fix various entry-method properties to reflect documentation
reset: imx7: Fix always writing bits as 0
reset: meson: add meson audio arb driver
reset: meson: add dt-bindings for meson-axg audio arb
Including:
- PASID table handling updates for the Intel VT-d driver. It
implements a global PASID space now so that applications
usings multiple devices will just have one PASID.
- A new config option to make iommu passthroug mode the default.
- New sysfs attribute for iommu groups to export the type of the
default domain.
- A debugfs interface (for debug only) usable by IOMMU drivers
to export internals to user-space.
- R-Car Gen3 SoCs support for the ipmmu-vmsa driver
- The ARM-SMMU now aborts transactions from unknown devices and
devices not attached to any domain.
- Various cleanups and smaller fixes all over the place.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=TeYQ
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU updates from Joerg Roedel:
- PASID table handling updates for the Intel VT-d driver. It implements
a global PASID space now so that applications usings multiple devices
will just have one PASID.
- A new config option to make iommu passthroug mode the default.
- New sysfs attribute for iommu groups to export the type of the
default domain.
- A debugfs interface (for debug only) usable by IOMMU drivers to
export internals to user-space.
- R-Car Gen3 SoCs support for the ipmmu-vmsa driver
- The ARM-SMMU now aborts transactions from unknown devices and devices
not attached to any domain.
- Various cleanups and smaller fixes all over the place.
* tag 'iommu-updates-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (42 commits)
iommu/omap: Fix cache flushes on L2 table entries
iommu: Remove the ->map_sg indirection
iommu/arm-smmu-v3: Abort all transactions if SMMU is enabled in kdump kernel
iommu/arm-smmu-v3: Prevent any devices access to memory without registration
iommu/ipmmu-vmsa: Don't register as BUS IOMMU if machine doesn't have IPMMU-VMSA
iommu/ipmmu-vmsa: Clarify supported platforms
iommu/ipmmu-vmsa: Fix allocation in atomic context
iommu: Add config option to set passthrough as default
iommu: Add sysfs attribyte for domain type
iommu/arm-smmu-v3: sync the OVACKFLG to PRIQ consumer register
iommu/arm-smmu: Error out only if not enough context interrupts
iommu/io-pgtable-arm-v7s: Abort allocation when table address overflows the PTE
iommu/io-pgtable-arm: Fix pgtable allocation in selftest
iommu/vt-d: Remove the obsolete per iommu pasid tables
iommu/vt-d: Apply per pci device pasid table in SVA
iommu/vt-d: Allocate and free pasid table
iommu/vt-d: Per PCI device pasid table interfaces
iommu/vt-d: Add for_each_device_domain() helper
iommu/vt-d: Move device_domain_info to header
iommu/vt-d: Apply global PASID in SVA
...
Enabling the interrupt early, before power has been applied to the
device, can result in an interrupt being delivered too early if:
- the IOMMU shares an interrupt with a VOP
- the VOP has a pending interrupt (after a kexec, for example)
In these conditions, we end-up taking the interrupt without
the IOMMU being ready to handle the interrupt (not powered on).
Moving the interrupt request past the pm_runtime_enable() call
makes sure we can at least access the IOMMU registers. Note that
this is only a partial fix, and that the VOP interrupt will still
be screaming until the VOP driver kicks in, which advocates for
a more synchronized interrupt enabling/disabling approach.
Fixes: 0f181d3cf7 ("iommu/rockchip: Add runtime PM support")
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
pm_runtime_get_if_in_use can fail: either PM has been disabled
altogether (-EINVAL), or the device hasn't been enabled yet (0).
Sadly, the Rockchip IOMMU driver tends to conflate the two things
by considering a non-zero return value as successful.
This has the consequence of hiding other bugs, so let's handle this
case throughout the driver, with a WARN_ON_ONCE so that we can try
and work out what happened.
Fixes: 0f181d3cf7 ("iommu/rockchip: Add runtime PM support")
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Here are all of the driver core and related patches for 4.19-rc1.
Nothing huge here, just a number of small cleanups and the ability to
now stop the deferred probing after init happens.
All of these have been in linux-next for a while with only a merge issue
reported. That merge issue is in fs/sysfs/group.c and Stephen has
posted the diff of what it should be to resolve this. I'll follow up
with that diff to this pull request.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCW3g86Q8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynyXQCePaZSW8wft4b7nLN8RdZ98ATBru0Ani10lrJa
HQeQJRNbWU1AZ0ym7695
=tOaH
-----END PGP SIGNATURE-----
Merge tag 'driver-core-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here are all of the driver core and related patches for 4.19-rc1.
Nothing huge here, just a number of small cleanups and the ability to
now stop the deferred probing after init happens.
All of these have been in linux-next for a while with only a merge
issue reported"
* tag 'driver-core-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (21 commits)
base: core: Remove WARN_ON from link dependencies check
drivers/base: stop new probing during shutdown
drivers: core: Remove glue dirs from sysfs earlier
driver core: remove unnecessary function extern declare
sysfs.h: fix non-kernel-doc comment
PM / Domains: Stop deferring probe at the end of initcall
iommu: Remove IOMMU_OF_DECLARE
iommu: Stop deferring probe at end of initcalls
pinctrl: Support stopping deferred probe after initcalls
dt-bindings: pinctrl: add a 'pinctrl-use-default' property
driver core: allow stopping deferred probe after init
driver core: add a debugfs entry to show deferred devices
sysfs: Fix internal_create_group() for named group updates
base: fix order of OF initialization
linux/device.h: fix kernel-doc notation warning
Documentation: update firmware loader fallback reference
kobject: Replace strncpy with memcpy
drivers: base: cacheinfo: use OF property_read_u32 instead of get_property,read_number
kernfs: Replace strncpy with memcpy
device: Add #define dev_fmt similar to #define pr_fmt
...
The CMA memory allocator doesn't support standard gfp flags for memory
allocation, so there is no point having it as a parameter for
dma_alloc_from_contiguous() function. Replace it by a boolean no_warn
argument, which covers all the underlaying cma_alloc() function
supports.
This will help to avoid giving false feeling that this function supports
standard gfp flags and callers can pass __GFP_ZERO to get zeroed buffer,
what has already been an issue: see commit dd65a941f6 ("arm64:
dma-mapping: clear buffers allocated with FORCE_CONTIGUOUS flag").
Link: http://lkml.kernel.org/r/20180709122020eucas1p21a71b092975cb4a3b9954ffc63f699d1~-sqUFoa-h2939329393eucas1p2Y@eucas1p2.samsung.com
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Michał Nazarewicz <mina86@mina86.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use new return type vm_fault_t for fault handler. For now, this is just
documenting that the function returns a VM_FAULT value rather than an
errno. Once all instances are converted, vm_fault_t will become a
distinct type.
Ref-> commit 1c8f422059 ("mm: change return type to vm_fault_t")
In this patch all the caller of handle_mm_fault() are changed to return
vm_fault_t type.
Link: http://lkml.kernel.org/r/20180617084810.GA6730@jordon-HP-15-Notebook-PC
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: James Hogan <jhogan@kernel.org>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: David S. Miller <davem@davemloft.net>
Cc: Richard Weinberger <richard@nod.at>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Levin, Alexander (Sasha Levin)" <alexander.levin@verizon.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The base address used for DMA operations on the second-level table
did incorrectly include the offset for the table entry. The offset
was then added again which lead to incorrect behavior.
Operations on the L1 table are not affected.
The calculation of the base address is changed to point to the
beginning of the L2 table.
Fixes: bfee0cf0ee ("iommu/omap: Use DMA-API for performing cache flushes")
Acked-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Ralf Goebel <ralf.goebel@imago-technologies.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
All iommu drivers use the default_iommu_map_sg implementation, and there
is no good reason to ever override it. Just expose it as iommu_map_sg
directly and remove the indirection, specially in our post-spectre world
where indirect calls are horribly expensive.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Take the new bus limit into account (when present) for IOVA allocations,
to accommodate those SoCs which integrate off-the-shelf IP blocks with
narrower interconnects such that the link between a device output and an
IOMMU input can truncate DMA addresses to even fewer bits than the
native size of either block's interface would imply.
Eventually it might make sense for the DMA core to apply this constraint
up-front in dma_set_mask() and friends, but for now this seems like the
least risky approach.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
If we find that the SMMU is enabled during probe, we reset it by
re-initialising its registers and either enabling translation or placing
it into bypass based on the disable_bypass commandline option.
In the case of a kdump kernel, the SMMU won't have been shutdown cleanly
by the previous kernel and there may be concurrent DMA through the SMMU.
Rather than reset the SMMU to bypass, which would likely lead to rampant
data corruption, we can instead configure the SMMU to abort all incoming
transactions when we find that it is enabled from within a kdump kernel.
Reported-by: Sameer Goel <sgoel@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Stream bypass is a potential security hole since a malicious device can be
hotplugged in without matching any drivers, yet be granted the ability to
access all of physical memory.
Now that we attach devices to domains by default, we can toggle the
disable_bypass default to "on", preventing DMA from unknown devices.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
This fixes kernel crashing on NVIDIA Tegra if kernel is compiled in
a multiplatform configuration and IPMMU-VMSA driver is enabled.
Cc: <stable@vger.kernel.org> # v3.20+
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The Renesas IPMMU-VMSA driver supports not just R-Car H2 and M2 SoCs,
but also other R-Car Gen2 and R-Car Gen3 SoCs.
Drop a superfluous "Renesas" while at it.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When attaching a device to an IOMMU group with
CONFIG_DEBUG_ATOMIC_SLEEP=y:
BUG: sleeping function called from invalid context at mm/slab.h:421
in_atomic(): 1, irqs_disabled(): 128, pid: 61, name: kworker/1:1
...
Call trace:
...
arm_lpae_alloc_pgtable+0x114/0x184
arm_64_lpae_alloc_pgtable_s1+0x2c/0x128
arm_32_lpae_alloc_pgtable_s1+0x40/0x6c
alloc_io_pgtable_ops+0x60/0x88
ipmmu_attach_device+0x140/0x334
ipmmu_attach_device() takes a spinlock, while arm_lpae_alloc_pgtable()
allocates memory using GFP_KERNEL. Originally, the ipmmu-vmsa driver
had its own custom page table allocation implementation using
GFP_ATOMIC, hence the spinlock was fine.
Fix this by replacing the spinlock by a mutex, like the arm-smmu driver
does.
Fixes: f20ed39f53 ("iommu/ipmmu-vmsa: Use the ARM LPAE page table allocator")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This allows the default behavior to be controlled by a kernel config
option instead of changing the commandline for the kernel to include
"iommu.passthrough=on" or "iommu=pt" on machines where this is desired.
Likewise, for machines where this config option is enabled, it can be
disabled at boot time with "iommu.passthrough=off" or "iommu=nopt".
Also corrected iommu=pt documentation for IA-64, since it has no code that
parses iommu= at all.
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
While we could print it at setup time, this is an easier way to match
each device to their default IOMMU allocation type.
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When PRI queue occurs overflow, driver should update the OVACKFLG to
the PRIQ consumer register, otherwise subsequent PRI requests will not
be processed.
Cc: Will Deacon <will.deacon@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Miao Zhong <zhongmiao@hisilicon.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Currently we check if the number of context banks is not equal to
num_context_interrupts. However, there are booloaders such as, one
on sdm845 that reserves few context banks and thus kernel views
less than the total available context banks.
So, although the hardware definition in device tree would mention
the correct number of context interrupts, this number can be
greater than the number of context banks visible to smmu in kernel.
We should therefore error out only when the number of context banks
is greater than the available number of context interrupts.
Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Suggested-by: Tomasz Figa <tfiga@chromium.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
[will: drop useless printk]
Signed-off-by: Will Deacon <will.deacon@arm.com>
When run on a 64-bit system in selftest, the v7s driver may obtain page
table with physical addresses larger than 32-bit. Level-2 tables are 1KB
and are are allocated with slab, which doesn't accept the GFP_DMA32
flag. Currently map() truncates the address written in the PTE, causing
iova_to_phys() or unmap() to access invalid memory. Kasan reports it as
a use-after-free. To avoid any nasty surprise, test if the physical
address fits in a PTE before returning a new table. 32-bit systems,
which are the main users of this page table format, shouldn't see any
difference.
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Commit 4b123757ee ("iommu/io-pgtable-arm: Make allocations
NUMA-aware") added a NUMA hint to page table allocation, but the pgtable
selftest doesn't provide an SMMU device parameter. Since dev_to_node
doesn't accept a NULL argument, add a special case for selftest.
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The obsolete per iommu pasid tables are no longer used. Hence,
clean up them.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This patch applies the per pci device pasid table in the Shared
Virtual Address (SVA) implementation.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This patch allocates a PASID table for a PCI device at the time
when the dmar dev_info is attached to dev->archdata.iommu, and
free it in the opposite case.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This patch adds the interfaces for per PCI device pasid
table management. Currently we allocate one pasid table
for all PCI devices under the scope of an IOMMU. It's
insecure in some cases where multiple devices under one
single IOMMU unit support PASID features. With per PCI
device pasid table, we can achieve finer protection and
isolation granularity.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Liu Yi L <yi.l.liu@intel.com>
Suggested-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This adds a helper named for_each_device_domain() to iterate
over the elements in device_domain_list and invoke a callback
against each element. This allows to search the device_domain
list in other source files.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This allows the per device iommu data and some helpers to be
used in other files.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This patch applies the global pasid name space in the shared
virtual address (SVA) implementation.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Liu Yi L <yi.l.liu@intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
idr_for_each_entry() is used to iteratte over idr elements
of a given type. It isn't suitable for the globle pasid idr
since the pasid idr consumer could specify different types
of pointers to bind with a pasid.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Liu Yi L <yi.l.liu@intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This adds the system wide PASID name space for the PASID
allocation. Currently we are using per IOMMU PASID name
spaces which are not suitable for some use cases. For an
example, one application (associated with a PASID) might
talk to two physical devices simultaneously while the two
devices could reside behind two different IOMMU units.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Liu Yi L <yi.l.liu@intel.com>
Suggested-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Liu Yi L <yi.l.liu@intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The WARN_ON() was introduced in commit 272e4f99e9 ("iommu/amd: WARN
when __[attach|detach]_device are called with irqs enabled") to ensure
that the domain->lock is taken in proper irqs disabled context. This
is required, because the domain->lock is taken as well in irq
context.
The proper context check by the WARN_ON() is redundant, because it is
already covered by LOCKDEP. When working with locks and changing
context, a run with LOCKDEP is required anyway and would detect the
wrong lock context.
Furthermore all callers for those functions are within the same file
and all callers acquire another lock which already disables interrupts.
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The TTSEL bit of IMUCTRn register of R-Car Gen3 needs to be set
unused MMU context number even if uTLBs are disabled
(The MMUEN bit of IMUCTRn register = 0).
Since initial values of IMUCTRn.TTSEL on all IPMMU-domains are 0,
this patch adds a new feature "reserved_context" to reserve IPMMU
context number 0 as the unused MMU context.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This reverts commit ab96746aaa.
The commit ab96746aaa ("iommu/vt-d: Clean up pasid quirk for
pre-production devices") triggers ECS mode on some platforms
which have broken ECS support. As the result, graphic device
will be inoperable on boot.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107017
Cc: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Now that we use the driver core to stop deferred probe for missing
drivers, IOMMU_OF_DECLARE can be removed.
This is slightly less optimal than having a list of built-in drivers in
that we'll now defer probe twice before giving up. This shouldn't have a
significant impact on boot times as past discussions about deferred
probe have given no evidence of deferred probe having a substantial
impact.
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: iommu@lists.linux-foundation.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-rockchip@lists.infradead.org
Cc: devicetree@vger.kernel.org
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The IOMMU subsystem has its own mechanism to not defer probe if driver
support is missing. Now that the driver core supports stopping deferring
probe if drivers aren't built-in (and probed), use the driver core
support so the IOMMU specific support can be removed.
Acked-by: Joerg Roedel <jroedel@suse.de>
Cc: iommu@lists.linux-foundation.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The AMD IOMMU XT mode enables interrupt remapping with 32-bit destination
APIC ID, which is required for x2APIC. The feature is available when
the XTSup bit is set in the IOMMU Extended Feature register
and/or the IVHD Type 10h IOMMU Feature Reporting field.
For more information, please see section "IOMMU x2APIC Support" of
the AMD I/O Virtualization Technology (IOMMU) Specification.
Cc: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Currently, the driver only supports lower 32-bit of IOMMU Control register.
However, newer AMD IOMMU specification has extended this register
to 64-bit. Therefore, replace the accessing API with the 64-bit version.
Cc: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Support the r8a77970 (R-Car V3M) and r8a77995 (R-Car D3) IPMMUs by sharing
feature flags with r8a7795 (R-Car H3) and r8a7796 (R-Car M3-W). Also update
IOMMU_OF_DECLARE to hook up the compat strings.
Based on work for the r8a7796 by Magnus Damm
[rebased on v4.17]
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Support the r8a7796 IPMMU by sharing feature flags between
r8a7795 and r8a7796. Also update IOMMU_OF_DECLARE to hook
up the updated compat string.
[rebased on v4.17]
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Bump up the maximum numbers of micro-TLBS to 48.
Each IPMMU device instance get micro-TLB assignment via
the "iommus" property in DT. Older SoCs tend to use a
maximum number of 32 micro-TLBs per IPMMU instance however
newer SoCs such as r8a7796 make use of up to 48 micro-TLBs.
At this point no SoC specific handling is done to validate
the maximum number of micro-TLBs, and because of that the
DT information is assumed to be within correct range for
each particular SoC.
If needed in the future SoC specific feature flags can be
added to handle the maximum number of micro-TLBs without
requiring DT changes, however at this point this does not
seem necessary.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Implement a skeleton framework for debugfs support in the AMD
IOMMU. Add an AMD-specific Kconfig boolean that depends upon
general enablement of DebugFS in the IOMMU.
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Singh, Brijesh