Some aead algorithms set .cra_flags = CRYPTO_ALG_TYPE_AEAD. But this is
redundant with the C structure type ('struct aead_alg'), and
crypto_register_aead() already sets the type flag automatically,
clearing any type flag that was already there. Apparently the useless
assignment has just been copy+pasted around.
So, remove the useless assignment from all the aead algorithms.
This patch shouldn't change any actual behavior.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch main goal is to improve driver performance by moving the
crypto request from a list to a RDR ring shadow.
This is possible since there is one producer and one consume for this
RDR request shadow and one ring descriptor is left unused.
Doing this change eliminates the use of spinlock when accessing the
descriptor ring and the need to dynamicaly allocate memory per crypto
request.
The crypto request is placed in the first RDR shadow descriptor only
if there are enough descriptors, when the result handler is invoked,
it fetches the first result descriptor from RDR shadow.
Signed-off-by: Ofer Heifetz <oferh@marvell.com>
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for two new algorithms in the Inside Secure
SafeXcel cryptographic engine driver: ecb(des3_ede) and cbc(des3_ede).
Signed-off-by: Ofer Heifetz <oferh@marvell.com>
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for two algorithms in the Inside Secure SafeXcel
cryptographic engine driver: ecb(des) and cbc(des).
Signed-off-by: Ofer Heifetz <oferh@marvell.com>
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for the hmac(md5) algorithm in the Inside Secure
SafeXcel cryptographic engine driver.
Signed-off-by: Ofer Heifetz <oferh@marvell.com>
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds the MD5 algorithm support to the Inside Secure SafeXcel
cryptographic engine driver.
Signed-off-by: Ofer Heifetz <oferh@marvell.com>
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The ORO bridge (connected to the EIP197 write channel) does not
generate back pressure towards the EIP197 when its internal FIFO is
full. It assumes that the EIP will not drive more write transactions
than the maximal supported outstanding (32).
Hence tx_max_cmd_queue must be configured to 5 (or less).
Signed-off-by: Ofer Heifetz <oferh@marvell.com>
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds extra steps in the module removal path, to reset the
command and result rings. The corresponding interrupts are cleared, and
the ring address configuration is reset.
Signed-off-by: Ofer Heifetz <oferh@marvell.com>
[Antoine: small reworks, commit message]
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch updates the TRC configuration so that the version of the
EIP197 engine being used is taken into account, as the configuration
differs between the EIP197B and the EIP197D.
Signed-off-by: Ofer Heifetz <oferh@marvell.com>
[Antoine: commit message]
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for the eip197d engine to the Inside Secure
SafeXcel cryptographic driver. This new engine is similar to the eip197b
and reuse most of its code.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
So far a single processing engine (PE) was configured and used in the
Inside Secure SafeXcel cryptographic engine driver. Some versions have
more than a single PE. This patch rework the driver's initialization to
take this into account and to allow configuring more than one PE.
Signed-off-by: Ofer Heifetz <oferh@marvell.com>
[Antoine: some reworks and commit message.]
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The Inside Secure SafeXcel driver currently uses 4 rings, but the
eip197d engines has 8 of them. This patch updates the driver so that
rings are allocated dynamically based on the number of available rings
supported by a given engine.
Signed-off-by: Ofer Heifetz <oferh@marvell.com>
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add a flags field in the private structure, and a first flag for engines
needing context invalidation (currently only the eip197b). The
invalidation is needed when the engine includes a TRC cache, which will
also be true for the upcoming addition of the eip197d engine.
Suggested-by: Ofer Heifetz <oferh@marvell.com>
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
EIP engines do not support the same set of algorithms. So far the
supported engines in the Inside Secure SafeXcel driver support the same
set of algorithms, but that won't be true for all engines. This patch
adds an 'engines' field in the algorithm definitions so that they only
are registered when using a compatible cryptographic engine.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
At first we used two compatibles in the SafeXcel driver, named after the
engine revision: eip97 and eip197. However this family of engines has
more precise versions and in fact we're supporting the eip97ies and
eip197b. More versions will be supported in the future, such as the
eip197d, and we'll need to differentiate them.
This patch fixes the compatibles used in the driver, to now use precise
ones. The two historical compatibles are kept for backward
compatibility.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch moves the firmware loaded by the Inside Secure SafeXcel
driver from /lib/firmware/ to /lib/firmware/inside-secure/eip197b/. This
prepares the driver for future patches which will support other
revisions of the EIP197 crypto engine as they'll have their own
firmwares.
To keep the compatibility of what was done, the old path is still
supported as a fallback for the EIP197b (currently the only one
supported by the driver that loads a firmware).
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds the authenc(hmac(sha384),cbc(aes)) algorithm support to
the Inside Secure SafeXcel driver.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds the hmac(sha384) algorithm support to the Inside Secure
SafeXcel driver.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds the sha384 algorithm support to the Inside Secure
SafeXcel driver.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds the authenc(hmac(sha512),cbc(aes)) algorithm support to
the Inside Secure SafeXcel driver.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds the hmac(sha512) algorithm support to the Inside Secure
SafeXcel driver.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds the sha512 algorithm support to the Inside Secure
SafeXcel driver.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
A counter is given to the engine when finishing hash computation. It
currently uses the blocksize while it counts the number of 64 bytes
blocks given to the engine. This works well for all algorithms so far,
as SHA1, SHA224 and SHA256 all have a blocksize of 64 bytes, but others
algorithms such as SHA512 wouldn't work.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch reworks the way invalidation request handlers handle the
result descriptor errors, to use the common error handling function.
This improves the drivers in terms of readability and maintainability.
Suggested-by: Ofer Heifetz <oferh@marvell.com>
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The token size was increased for AEAD support. Occasional authentication
fails arise since the result descriptor overflows. This is because the
token size and the engine minimal thresholds must be in sync.
Signed-off-by: Ofer Heifetz <oferh@marvell.com>
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds the authenc(hmac(sha1),cbc(aes)) AEAD algorithm
support to the Inside Secure SafeXcel driver.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds the authenc(hmac(sha224),cbc(aes)) AEAD algorithm
support to the Inside Secure SafeXcel driver.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for the first AEAD algorithm in the Inside
Secure SafeXcel driver, authenc(hmac(sha256),cbc(aes)). As this is the
first AEAD algorithm added to this driver, common AEAD functions are
added as well.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch improves the error reporting from the Inside Secure driver to
the upper layers and crypto consumers. All errors reported by the engine
aren't fatal, and some may be genuine.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This commit fixes the CONTEXT_CONTROL_TYPE_HASH_ENCRYPT_OUT and
CONTEXT_CONTROL_TYPE_HASH_DECRYPT_OUT types by assigning the right
value, and by renaming CONTEXT_CONTROL_TYPE_HASH_DECRYPT_OUT to
CONTEXT_CONTROL_TYPE_HASH_DECRYPT_IN.
This is not submitted as a fix for older kernel versions as these two
defines weren't used back then.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patches makes the key and context size computation dynamic when
using memzero_explicit() on these two arrays. This is safer, cleaner and
will help future modifications of the driver when these two parameters
sizes will changes (the context size will be bigger when using AEAD
algorithms).
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch makes the context control size computation dynamic, not to
rely on hardcoded values. This is better for the future, and will help
adding the AEAD support.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patches reworks the way the algorithm type is set in the context,
by using the fact that the decryption algorithms are just a combination
of the algorithm encryption type and CONTEXT_CONTROL_TYPE_NULL_IN.
This will help having simpler code when adding the AEAD support, to
avoid ending up with an endless switch case block.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch reworks the Inside Secure cipher functions, to remove all
skcipher specific information and structure from all functions generic
enough to be shared between skcipher and aead algorithms.
This is a cosmetic only patch.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch removes the use of VLAs to allocate requests on the stack, by
removing both SKCIPHER_REQUEST_ON_STACK and AHASH_REQUEST_ON_STACK. As
we still need to allocate requests on the stack to ease the creation of
invalidation requests a new, non-VLA, definition is used:
EIP197_REQUEST_ON_STACK.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch fixes the Inside Secure driver which uses a memtset() call to
set an MMIO area from the cryptographic engine to 0. This is wrong as
memset() isn't guaranteed to work on MMIO for many reasons. This led to
kernel paging request panics in certain cases. Use memset_io() instead.
Fixes: 1b44c5a60c ("crypto: inside-secure - add SafeXcel EIP197 crypto engine driver")
Reported-by: Ofer Heifetz <oferh@marvell.com>
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds the hmac(sha224) support to the Inside Secure
cryptographic engine driver.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds the hmac(sha256) support to the Inside Secure
cryptographic engine driver.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patches uses the state size of the algorithms instead of their
digest size to copy the ipad and opad in the context. This doesn't fix
anything as the state and digest size are the same for many algorithms,
and for all the hmac currently supported by this driver. However
hmac(sha224) use the sha224 hash function which has a different digest
and state size. This commit prepares the addition of such algorithms.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The token used for encryption and decryption of skcipher algorithms sets
its stat field to "last packet". As it's a cipher only algorithm, there
is not hash operation and thus the "last hash" bit should be set to tell
the internal engine no hash operation should be performed.
This does not fix a bug, but improves the token definition to follow
exactly what's advised by the datasheet.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patches update the way the digest is copied from the state buffer
to the result buffer, so that the copy only happen after the state
buffer was DMA unmapped, as otherwise the buffer would be owned by the
device.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch improves the send error path as it wasn't handling all error
cases. A new label is added, and some of the goto are updated to point
to the right labels, so that the code is more robust to errors.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch fixes a typo in the EIP197_HIA_xDR_WR_CTRL_BUG register name,
as it should be EIP197_HIA_xDR_WR_CTRL_BUF. This is a cosmetic only
change.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Small cosmetic patch fixing one typo in the
EIP197_HIA_DSE_CFG_ALLWAYS_BUFFERABLE macro, it should be _ALWAYS_.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patches moves the digest information from the transformation
context to the request context. This fixes cases where HMAC init
functions were called and override the digest value for a short period
of time, as the HMAC init functions call the SHA init one which reset
the value. This lead to a small percentage of HMAC being incorrectly
computed under heavy load.
Fixes: 1b44c5a60c ("crypto: inside-secure - add SafeXcel EIP197 crypto engine driver")
Suggested-by: Ofer Heifetz <oferh@marvell.com>
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
[Ofer here did all the work, from seeing the issue to understanding the
root cause. I only made the patch.]
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
On Armada 7K/8K we need to explicitly enable the register clock. This
clock is optional because not all the SoCs using this IP need it but at
least for Armada 7K/8K it is actually mandatory.
The binding documentation is updated accordingly.
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The clock is optional, but if it is present we should managed it. If
there is an error while trying getting it, we should exit and report this
error.
So instead of returning an error only in the -EPROBE case, turn it in an
other way and ignore the clock only if it is not present (-ENOENT case).
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In this driver the clock is got but never put when the driver is removed
or if there is an error in the probe.
Using the managed version of clk_get() allows to let the kernel take care
of it.
Fixes: 1b44c5a60c ("crypto: inside-secure - add SafeXcel EIP197 crypto
engine driver")
cc: stable@vger.kernel.org
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Eric Biggers