On emulated VM-entry and VM-exit, update the CPUID bits that reflect
CR4.OSXSAVE and CR4.PKE.
This fixes a bug where the CPUID bits could continue to reflect L2 CR4
values after emulated VM-exit to L1. It also fixes a related bug where
the CPUID bits could continue to reflect L1 CR4 values after emulated
VM-entry to L2. The latter bug is mainly relevant to SVM, wherein
CPUID is not a required intercept. However, it could also be relevant
to VMX, because the code to conditionally update these CPUID bits
assumes that the guest CPUID and the guest CR4 are always in sync.
Fixes: 8eb3f87d90 ("KVM: nVMX: fix guest CR4 loading when emulating L2 to L1 exit")
Fixes: 2acf923e38 ("KVM: VMX: Enable XSAVE/XRSTOR for guest")
Fixes: b9baba8614 ("KVM, pkeys: expose CPUID/CR4 to guest")
Reported-by: Abhiroop Dabral <adabral@paloaltonetworks.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Cc: Haozhong Zhang <haozhong.zhang@intel.com>
Cc: Dexuan Cui <dexuan.cui@intel.com>
Cc: Huaitong Han <huaitong.han@intel.com>
Message-Id: <20201029170648.483210-1-jmattson@google.com>
This patch is heavily based on previous work from Lei Cao
<lei.cao@stratus.com> and Paolo Bonzini <pbonzini@redhat.com>. [1]
KVM currently uses large bitmaps to track dirty memory. These bitmaps
are copied to userspace when userspace queries KVM for its dirty page
information. The use of bitmaps is mostly sufficient for live
migration, as large parts of memory are be dirtied from one log-dirty
pass to another. However, in a checkpointing system, the number of
dirty pages is small and in fact it is often bounded---the VM is
paused when it has dirtied a pre-defined number of pages. Traversing a
large, sparsely populated bitmap to find set bits is time-consuming,
as is copying the bitmap to user-space.
A similar issue will be there for live migration when the guest memory
is huge while the page dirty procedure is trivial. In that case for
each dirty sync we need to pull the whole dirty bitmap to userspace
and analyse every bit even if it's mostly zeros.
The preferred data structure for above scenarios is a dense list of
guest frame numbers (GFN). This patch series stores the dirty list in
kernel memory that can be memory mapped into userspace to allow speedy
harvesting.
This patch enables dirty ring for X86 only. However it should be
easily extended to other archs as well.
[1] https://patchwork.kernel.org/patch/10471409/
Signed-off-by: Lei Cao <lei.cao@stratus.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201001012222.5767-1-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Originally, we have three code paths that can dirty a page without
vcpu context for X86:
- init_rmode_identity_map
- init_rmode_tss
- kvmgt_rw_gpa
init_rmode_identity_map and init_rmode_tss will be setup on
destination VM no matter what (and the guest cannot even see them), so
it does not make sense to track them at all.
To do this, allow __x86_set_memory_region() to return the userspace
address that just allocated to the caller. Then in both of the
functions we directly write to the userspace address instead of
calling kvm_write_*() APIs.
Another trivial change is that we don't need to explicitly clear the
identity page table root in init_rmode_identity_map() because no
matter what we'll write to the whole page with 4M huge page entries.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201001012044.5151-4-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM_GET_SUPPORTED_HV_CPUID is a vCPU ioctl but its output is now
independent from vCPU and in some cases VMMs may want to use it as a system
ioctl instead. In particular, QEMU doesn CPU feature expansion before any
vCPU gets created so KVM_GET_SUPPORTED_HV_CPUID can't be used.
Convert KVM_GET_SUPPORTED_HV_CPUID to 'dual' system/vCPU ioctl with the
same meaning.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200929150944.1235688-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Background: We have a lightweight HV, it needs INIT-VMExit and
SIPI-VMExit to wake-up APs for guests since it do not monitor
the Local APIC. But currently virtual wait-for-SIPI(WFS) state
is not supported in nVMX, so when running on top of KVM, the L1
HV cannot receive the INIT-VMExit and SIPI-VMExit which cause
the L2 guest cannot wake up the APs.
According to Intel SDM Chapter 25.2 Other Causes of VM Exits,
SIPIs cause VM exits when a logical processor is in
wait-for-SIPI state.
In this patch:
1. introduce SIPI exit reason,
2. introduce wait-for-SIPI state for nVMX,
3. advertise wait-for-SIPI support to guest.
When L1 hypervisor is not monitoring Local APIC, L0 need to emulate
INIT-VMExit and SIPI-VMExit to L1 to emulate INIT-SIPI-SIPI for
L2. L2 LAPIC write would be traped by L0 Hypervisor(KVM), L0 should
emulate the INIT/SIPI vmexit to L1 hypervisor to set proper state
for L2's vcpu state.
Handle procdure:
Source vCPU:
L2 write LAPIC.ICR(INIT).
L0 trap LAPIC.ICR write(INIT): inject a latched INIT event to target
vCPU.
Target vCPU:
L0 emulate an INIT VMExit to L1 if is guest mode.
L1 set guest VMCS, guest_activity_state=WAIT_SIPI, vmresume.
L0 set vcpu.mp_state to INIT_RECEIVED if (vmcs12.guest_activity_state
== WAIT_SIPI).
Source vCPU:
L2 write LAPIC.ICR(SIPI).
L0 trap LAPIC.ICR write(INIT): inject a latched SIPI event to traget
vCPU.
Target vCPU:
L0 emulate an SIPI VMExit to L1 if (vcpu.mp_state == INIT_RECEIVED).
L1 set CS:IP, guest_activity_state=ACTIVE, vmresume.
L0 resume to L2.
L2 start-up.
Signed-off-by: Yadong Qi <yadong.qi@intel.com>
Message-Id: <20200922052343.84388-1-yadong.qi@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201106065122.403183-1-yadong.qi@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
vmx_apic_init_signal_blocked is buggy in that it returns true
even in VMX non-root mode. In non-root mode, however, INITs
are not latched, they just cause a vmexit. Previously,
KVM was waiting for them to be processed when kvm_apic_accept_events
and in the meanwhile it ate the SIPIs that the processor received.
However, in order to implement the wait-for-SIPI activity state,
KVM will have to process KVM_APIC_SIPI in vmx_check_nested_events,
and it will not be possible anymore to disregard SIPIs in non-root
mode as the code is currently doing.
By calling kvm_x86_ops.nested_ops->check_events, we can force a vmexit
(with the side-effect of latching INITs) before incorrectly injecting
an INIT or SIPI in a guest, and therefore vmx_apic_init_signal_blocked
can do the right thing.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rework the common CR4 and SREGS checks to return a bool instead of an
int, i.e. true/false instead of 0/-EINVAL, and add "is" to the name to
clarify the polarity of the return value (which is effectively inverted
by this change).
No functional changed intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20201007014417.29276-6-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Split out VMX's checks on CR4.VMXE to a dedicated hook, .is_valid_cr4(),
and invoke the new hook from kvm_valid_cr4(). This fixes an issue where
KVM_SET_SREGS would return success while failing to actually set CR4.
Fixing the issue by explicitly checking kvm_x86_ops.set_cr4()'s return
in __set_sregs() is not a viable option as KVM has already stuffed a
variety of vCPU state.
Note, kvm_valid_cr4() and is_valid_cr4() have different return types and
inverted semantics. This will be remedied in a future patch.
Fixes: 5e1746d620 ("KVM: nVMX: Allow setting the VMXE bit in CR4")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20201007014417.29276-5-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop vmx_set_cr4()'s explicit check on the 'nested' module param now
that common x86 handles the check by incorporating VMXE into the CR4
reserved bits, via kvm_cpu_caps. X86_FEATURE_VMX is set in kvm_cpu_caps
(by vmx_set_cpu_caps()), if and only if 'nested' is true.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20201007014417.29276-3-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop vmx_set_cr4()'s somewhat hidden guest_cpuid_has() check on VMXE now
that common x86 handles the check by incorporating VMXE into the CR4
reserved bits, i.e. in cr4_guest_rsvd_bits. This fixes a bug where KVM
incorrectly rejects KVM_SET_SREGS with CR4.VMXE=1 if it's executed
before KVM_SET_CPUID{,2}.
Fixes: 5e1746d620 ("KVM: nVMX: Allow setting the VMXE bit in CR4")
Reported-by: Stas Sergeev <stsp@users.sourceforge.net>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20201007014417.29276-2-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It was noticed that evmcs_sanitize_exec_ctrls() is not being executed
nowadays despite the code checking 'enable_evmcs' static key looking
correct. Turns out, static key magic doesn't work in '__init' section
(and it is unclear when things changed) but setup_vmcs_config() is called
only once per CPU so we don't really need it to. Switch to checking
'enlightened_vmcs' instead, it is supposed to be in sync with
'enable_evmcs'.
Opportunistically make evmcs_sanitize_exec_ctrls '__init' and drop unneeded
extra newline from it.
Reported-by: Yang Weijiang <weijiang.yang@intel.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20201014143346.2430936-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
a host hang.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl+T6RoUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMx2gf+PjoeMjLKtstdKDdiLFV46X7YdYKz
sUoDhpSbiLpEus5BF6OauUWwKgB7GcsoDUnLgjN5jqkAQzoFm0YOcI2GlXS999SL
5QIg6Vw5WF8X/7EVt6gxzC6KcWjbQvv38R/Ktd/0sMqRBPiZG7kVcWeXlopb9DaQ
Rdgg0hNVpgDiTNrBNl5RnM7Wz/SrOZmwaotW1LcII+BkCnj9Av77v77TxN9YuvG4
o+GMMQseFAzDjQ+jHZkHuBmPRy5dQB9ywzEIrUCubqhT04sWbQ6DhGfx45a0IgsY
33iT28omYdMVlRd/i3KcHQ86JJSo5g7pOqLwGd1L9HjNTS5VmQ8HXNJWBA==
=ECL9
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"Two fixes for this merge window, and an unrelated bugfix for a host
hang"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: ioapic: break infinite recursion on lazy EOI
KVM: vmx: rename pi_init to avoid conflict with paride
KVM: x86/mmu: Avoid modulo operator on 64-bit value to fix i386 build
allyesconfig results in:
ld: drivers/block/paride/paride.o: in function `pi_init':
(.text+0x1340): multiple definition of `pi_init'; arch/x86/kvm/vmx/posted_intr.o:posted_intr.c:(.init.text+0x0): first defined here
make: *** [Makefile:1164: vmlinux] Error 1
because commit:
commit 8888cdd099
Author: Xiaoyao Li <xiaoyao.li@intel.com>
Date: Wed Sep 23 11:31:11 2020 -0700
KVM: VMX: Extract posted interrupt support to separate files
added another pi_init(), though one already existed in the paride code.
Reported-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- New page table code for both hypervisor and guest stage-2
- Introduction of a new EL2-private host context
- Allow EL2 to have its own private per-CPU variables
- Support of PMU event filtering
- Complete rework of the Spectre mitigation
PPC:
- Fix for running nested guests with in-kernel IRQ chip
- Fix race condition causing occasional host hard lockup
- Minor cleanups and bugfixes
x86:
- allow trapping unknown MSRs to userspace
- allow userspace to force #GP on specific MSRs
- INVPCID support on AMD
- nested AMD cleanup, on demand allocation of nested SVM state
- hide PV MSRs and hypercalls for features not enabled in CPUID
- new test for MSR_IA32_TSC writes from host and guest
- cleanups: MMU, CPUID, shared MSRs
- LAPIC latency optimizations ad bugfixes
For x86, also included in this pull request is a new alternative and
(in the future) more scalable implementation of extended page tables
that does not need a reverse map from guest physical addresses to
host physical addresses. For now it is disabled by default because
it is still lacking a few of the existing MMU's bells and whistles.
However it is a very solid piece of work and it is already available
for people to hammer on it.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl+S8dsUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroM40Af+M46NJmuS5rcwFfybvK/c42KT6svX
Co1NrZDwzSQ2mMy3WQzH9qeLvb+nbY4sT3n5BPNPNsT+aIDPOTDt//qJ2/Ip9UUs
tRNea0MAR96JWLE7MSeeRxnTaQIrw/AAZC0RXFzZvxcgytXwdqBExugw4im+b+dn
Dcz8QxX1EkwT+4lTm5HC0hKZAuo4apnK1QkqCq4SdD2QVJ1YE6+z7pgj4wX7xitr
STKD6q/Yt/0ndwqS0GSGbyg0jy6mE620SN6isFRkJYwqfwLJci6KnqvEK67EcNMu
qeE017K+d93yIVC46/6TfVHzLR/D1FpQ8LZ16Yl6S13OuGIfAWBkQZtPRg==
=AD6a
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"For x86, there is a new alternative and (in the future) more scalable
implementation of extended page tables that does not need a reverse
map from guest physical addresses to host physical addresses.
For now it is disabled by default because it is still lacking a few of
the existing MMU's bells and whistles. However it is a very solid
piece of work and it is already available for people to hammer on it.
Other updates:
ARM:
- New page table code for both hypervisor and guest stage-2
- Introduction of a new EL2-private host context
- Allow EL2 to have its own private per-CPU variables
- Support of PMU event filtering
- Complete rework of the Spectre mitigation
PPC:
- Fix for running nested guests with in-kernel IRQ chip
- Fix race condition causing occasional host hard lockup
- Minor cleanups and bugfixes
x86:
- allow trapping unknown MSRs to userspace
- allow userspace to force #GP on specific MSRs
- INVPCID support on AMD
- nested AMD cleanup, on demand allocation of nested SVM state
- hide PV MSRs and hypercalls for features not enabled in CPUID
- new test for MSR_IA32_TSC writes from host and guest
- cleanups: MMU, CPUID, shared MSRs
- LAPIC latency optimizations ad bugfixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (232 commits)
kvm: x86/mmu: NX largepage recovery for TDP MMU
kvm: x86/mmu: Don't clear write flooding count for direct roots
kvm: x86/mmu: Support MMIO in the TDP MMU
kvm: x86/mmu: Support write protection for nesting in tdp MMU
kvm: x86/mmu: Support disabling dirty logging for the tdp MMU
kvm: x86/mmu: Support dirty logging for the TDP MMU
kvm: x86/mmu: Support changed pte notifier in tdp MMU
kvm: x86/mmu: Add access tracking for tdp_mmu
kvm: x86/mmu: Support invalidate range MMU notifier for TDP MMU
kvm: x86/mmu: Allocate struct kvm_mmu_pages for all pages in TDP MMU
kvm: x86/mmu: Add TDP MMU PF handler
kvm: x86/mmu: Remove disallowed_hugepage_adjust shadow_walk_iterator arg
kvm: x86/mmu: Support zapping SPTEs in the TDP MMU
KVM: Cache as_id in kvm_memory_slot
kvm: x86/mmu: Add functions to handle changed TDP SPTEs
kvm: x86/mmu: Allocate and free TDP MMU roots
kvm: x86/mmu: Init / Uninit the TDP MMU
kvm: x86/mmu: Introduce tdp_iter
KVM: mmu: extract spte.h and spte.c
KVM: mmu: Separate updating a PTE from kvm_set_pte_rmapp
...
Intercept CR4 bits that are guest reserved so that KVM correctly injects
a #GP fault if the guest attempts to set a reserved bit. If a feature
is supported by the CPU but is not exposed to the guest, and its
associated CR4 bit is not intercepted by KVM by default, then KVM will
fail to inject a #GP if the guest sets the CR4 bit without triggering
an exit, e.g. by toggling only the bit in question.
Note, KVM doesn't give the guest direct access to any CR4 bits that are
also dependent on guest CPUID. Yet.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200930041659.28181-5-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that vcpu_after_set_cpuid() and update_exception_bitmap() are called
back-to-back, subsume the exception bitmap update into the common CPUID
update. Drop the SVM invocation entirely as SVM's exception bitmap
doesn't vary with respect to guest CPUID.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200930041659.28181-4-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This will be used to signal an error to the userspace, in case
the vendor code failed during handling of this msr. (e.g -ENOMEM)
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20201001112954.6258-4-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rework the resetting of the MSR bitmap for x2APIC MSRs to ignore userspace
filtering. Allowing userspace to intercept reads to x2APIC MSRs when
APICV is fully enabled for the guest simply can't work; the LAPIC and thus
virtual APIC is in-kernel and cannot be directly accessed by userspace.
To keep things simple we will in fact forbid intercepting x2APIC MSRs
altogether, independent of the default_allow setting.
Cc: Alexander Graf <graf@amazon.com>
Cc: Aaron Lewis <aaronlewis@google.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20201005195532.8674-3-sean.j.christopherson@intel.com>
[Modified to operate even if APICv is disabled, adjust documentation. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix an inverted flag for intercepting x2APIC MSRs and intercept writes
by default, even when APICV is enabled.
Fixes: 3eb900173c ("KVM: x86: VMX: Prevent MSR passthrough when MSR access is denied")
Co-developed-by: Peter Xu <peterx@redhat.com>
[sean: added changelog]
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20201005195532.8674-2-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Most of the changes are cleanups and reorganization to make the objtool code
more arch-agnostic. This is in preparation for non-x86 support.
Fixes:
- KASAN fixes.
- Handle unreachable trap after call to noreturn functions better.
- Ignore unreachable fake jumps.
- Misc smaller fixes & cleanups.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=KX5o
-----END PGP SIGNATURE-----
Merge tag 'objtool-core-2020-10-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
"Most of the changes are cleanups and reorganization to make the
objtool code more arch-agnostic. This is in preparation for non-x86
support.
Other changes:
- KASAN fixes
- Handle unreachable trap after call to noreturn functions better
- Ignore unreachable fake jumps
- Misc smaller fixes & cleanups"
* tag 'objtool-core-2020-10-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
perf build: Allow nested externs to enable BUILD_BUG() usage
objtool: Allow nested externs to enable BUILD_BUG()
objtool: Permit __kasan_check_{read,write} under UACCESS
objtool: Ignore unreachable trap after call to noreturn functions
objtool: Handle calling non-function symbols in other sections
objtool: Ignore unreachable fake jumps
objtool: Remove useless tests before save_reg()
objtool: Decode unwind hint register depending on architecture
objtool: Make unwind hint definitions available to other architectures
objtool: Only include valid definitions depending on source file type
objtool: Rename frame.h -> objtool.h
objtool: Refactor jump table code to support other architectures
objtool: Make relocation in alternative handling arch dependent
objtool: Abstract alternative special case handling
objtool: Move macros describing structures to arch-dependent code
objtool: Make sync-check consider the target architecture
objtool: Group headers to check in a single list
objtool: Define 'struct orc_entry' only when needed
objtool: Skip ORC entry creation for non-text sections
objtool: Move ORC logic out of check()
...
The PFEC_MASK and PFEC_MATCH fields in the VMCS reverse the meaning of
the #PF intercept bit in the exception bitmap when they do not match.
This means that, if PFEC_MASK and/or PFEC_MATCH are set, the
hypervisor can get a vmexit for #PF exceptions even when the
corresponding bit is clear in the exception bitmap.
This is unexpected and is promptly detected by a WARN_ON_ONCE.
To fix it, reset PFEC_MASK and PFEC_MATCH when the #PF intercept
is disabled (as is common with enable_ept && !allow_smaller_maxphyaddr).
Reported-by: Qian Cai <cai@redhat.com>>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We will introduce the concept of MSRs that may not be handled in kernel
space soon. Some MSRs are directly passed through to the guest, effectively
making them handled by KVM from user space's point of view.
This patch introduces all logic required to ensure that MSRs that
user space wants trapped are not marked as direct access for guests.
Signed-off-by: Alexander Graf <graf@amazon.com>
Message-Id: <20200925143422.21718-7-graf@amazon.com>
[Replace "_idx" with "_slot". - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Prepare vmx and svm for a subsequent change that ensures the MSR permission
bitmap is set to allow an MSR that userspace is tracking to force a vmx_vmexit
in the guest.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
[agraf: rebase, adapt SVM scheme to nested changes that came in between]
Signed-off-by: Alexander Graf <graf@amazon.com>
Message-Id: <20200925143422.21718-5-graf@amazon.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename "index" to "slot" in struct vmx_uret_msr to align with the
terminology used by common x86's kvm_user_return_msrs, and to avoid
conflating "MSR's ECX index" with "MSR's index into an array".
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923180409.32255-16-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename "vmx_msr_index" to "vmx_uret_msrs_list" to associate it with the
uret MSRs array, and to avoid conflating "MSR's ECX index" with "MSR's
index into an array". Similarly, don't use "slot" in the name as that
terminology is claimed by the common x86 "user_return_msrs" mechanism.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923180409.32255-15-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add "uret" to vmx_set_guest_msr() to explicitly associate it with the
guest_uret_msrs array, and to differentiate it from vmx_set_msr() as
well as VMX's load/store MSRs.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923180409.32255-14-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename "find_msr_entry" to scope it to VMX and to associate it with
guest_uret_msrs. Drop the "entry" so that the function name pairs with
the existing __vmx_find_uret_msr(), which intentionally uses a double
underscore prefix instead of appending "index" or "slot" as those names
are already claimed by other pieces of the user return MSR stack.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923180409.32255-13-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add vmx_setup_uret_msr() to wrap the lookup and manipulation of the uret
MSRs array during setup_msrs(). In addition to consolidating code, this
eliminates move_msr_up(), which while being a very literally description
of the function, isn't exacly helpful in understanding the net effect of
the code.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923180409.32255-12-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move checking for the existence of MSR_EFER in the uret MSR array into
update_transition_efer() so that the lookup and manipulation of the
array in setup_msrs() occur back-to-back. This paves the way toward
adding a helper to wrap the lookup and manipulation.
To avoid unnecessary overhead, defer the lookup until the uret array
would actually be modified in update_transition_efer(). EFER obviously
exists on CPUs that support the dedicated VMCS fields for switching
EFER, and EFER must exist for the guest and host EFER.NX value to
diverge, i.e. there is no danger of attempting to read/write EFER when
it doesn't exist.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923180409.32255-11-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Check for RDTSCP support prior to checking if MSR_TSC_AUX is in the uret
MSRs array so that the array lookup and manipulation are back-to-back.
This paves the way toward adding a helper to wrap the lookup and
manipulation.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923180409.32255-10-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename "__find_msr_index" to scope it to VMX, associate it with
guest_uret_msrs, and to avoid conflating "MSR's ECX index" with "MSR's
array index". Similarly, don't use "slot" in the name so as to avoid
colliding the common x86's half of "user_return_msrs" (the slot in
kvm_user_return_msrs is not the same slot in guest_uret_msrs).
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923180409.32255-9-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add "uret" to "guest_msrs_ready" to explicitly associate it with the
"guest_uret_msrs" array, and replace "ready" with "loaded" to more
precisely reflect what it tracks, e.g. "ready" could be interpreted as
meaning ready for processing (setup_msrs() has run), which is wrong.
"loaded" also aligns with the similar "guest_state_loaded" field.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923180409.32255-8-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add "uret" into the name of "save_nmsrs" to explicitly associate it with
the guest_uret_msrs array, and replace "save" with "active" (for lack of
a better word) to better describe what is being tracked. While "save"
is more or less accurate when viewed as a literal description of the
field, e.g. it holds the number of MSRs that were saved into the array
the last time setup_msrs() was invoked, it can easily be misinterpreted
by the reader, e.g. as meaning the number of MSRs that were saved from
hardware at some point in the past, or as the number of MSRs that need
to be saved at some point in the future, both of which are wrong.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923180409.32255-7-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename vcpu_vmx.nsmrs to vcpu_vmx.nr_uret_msrs to explicitly associate
it with the guest_uret_msrs array.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923180409.32255-6-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename struct "shared_msr_entry" to "vmx_uret_msr" to align with x86's
rename of "shared_msrs" to "user_return_msrs", and to call out that the
struct is specific to VMX, i.e. not part of the generic "shared_msrs"
framework. Abbreviate "user_return" as "uret" to keep line lengths
marginally sane and code more or less readable.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923180409.32255-5-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add "loadstore" to vmx_find_msr_index() to differentiate it from the so
called shared MSRs helpers (which will soon be renamed), and replace
"index" with "slot" to better convey that the helper returns slot in the
array, not the MSR index (the value that gets stuffed into ECX).
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923180409.32255-4-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add "MAX" to the LOADSTORE and so called SHARED MSR defines to make it
more clear that the define controls the array size, as opposed to the
actual number of valid entries that are in the array.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923180409.32255-3-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename the "shared_msrs" mechanism, which is used to defer restoring
MSRs that are only consumed when running in userspace, to a more banal
but less likely to be confusing "user_return_msrs".
The "shared" nomenclature is confusing as it's not obvious who is
sharing what, e.g. reasonable interpretations are that the guest value
is shared by vCPUs in a VM, or that the MSR value is shared/common to
guest and host, both of which are wrong.
"shared" is also misleading as the MSR value (in hardware) is not
guaranteed to be shared/reused between VMs (if that's indeed the correct
interpretation of the name), as the ability to share values between VMs
is simply a side effect (albiet a very nice side effect) of deferring
restoration of the host value until returning from userspace.
"user_return" avoids the above confusion by describing the mechanism
itself instead of its effects.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923180409.32255-2-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Read vmcs.EXIT_QUALIFICATION and vmcs.VM_EXIT_INTR_INFO only if the
VM-Exit is being reflected to L1 now that they are no longer passed
directly to the kvm_nested_vmexit tracepoint.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923201349.16097-8-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the newly introduced TRACE_EVENT_KVM_EXIT to define the guts of
kvm_nested_vmexit so that it captures and prints the same information as
kvm_exit. This has the bonus side effect of fixing the interrupt info
and error code printing for the case where they're invalid, e.g. if the
exit was a failed VM-Entry. This also sets the stage for retrieving
EXIT_QUALIFICATION and VM_EXIT_INTR_INFO in nested_vmx_reflect_vmexit()
if and only if the VM-Exit is being routed to L1.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923201349.16097-7-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Extend the kvm_exit tracepoint to align it with kvm_nested_vmexit in
terms of what information is captured. On SVM, add interrupt info and
error code, while on VMX it add IDT vectoring and error code. This
sets the stage for macrofying the kvm_exit tracepoint definition so that
it can be reused for kvm_nested_vmexit without loss of information.
Opportunistically stuff a zero for VM_EXIT_INTR_INFO if the VM-Enter
failed, as the field is guaranteed to be invalid. Note, it'd be
possible to further filter the interrupt/exception fields based on the
VM-Exit reason, but the helper is intended only for tracepoints, i.e.
an extra VMREAD or two is a non-issue, the failed VM-Enter case is just
low hanging fruit.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923201349.16097-5-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a helper, is_exception_with_error_code(), to provide the simple but
difficult to read code of checking for a valid exception with an error
code given a vmcs.VM_EXIT_INTR_INFO value. The helper will gain another
user, vmx_get_exit_info(), in a future patch.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923201349.16097-4-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use kvm_rip_read() to read the guest's RIP for the nested VM-Exit
tracepoint instead of having the caller pass in an argument. Params
that are passed into a tracepoint are evaluated even if the tracepoint
is disabled, i.e. passing in RIP for VMX incurs a VMREAD and retpoline
to retrieve a value that may never be used, e.g. if the exit is due to a
hardware interrupt.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923201349.16097-3-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
WARN if KVM attempts to switch to the currently loaded VMCS. Now that
nested_vmx_free_vcpu() doesn't blindly call vmx_switch_vmcs(), all paths
that lead to vmx_switch_vmcs() are implicitly guarded by guest vs. host
mode, e.g. KVM should never emulate VMX instructions when guest mode is
active, and nested_vmx_vmexit() should never be called when host mode is
active.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923184452.980-8-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the explicit switch to vmcs01 and the call to free_nested() in
nested_vmx_free_vcpu(). free_nested(), which is called unconditionally
by vmx_leave_nested(), ensures vmcs01 is loaded prior to freeing vmcs02
and friends.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923184452.980-7-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a WARN in free_nested() to ensure vmcs01 is loaded prior to freeing
vmcs02 and friends, and explicitly switch to vmcs01 if it's not. KVM is
supposed to keep is_guest_mode() and loaded_vmcs==vmcs02 synchronized,
but bugs happen and freeing vmcs02 while it's in use will escalate a KVM
error to a use-after-free and potentially crash the kernel.
Do the WARN and switch even in the !vmxon case to help detect latent
bugs. free_nested() is not a hot path, and the check is cheap.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923184452.980-6-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move free_nested() down below vmx_switch_vmcs() so that a future patch
can do an "emergency" invocation of vmx_switch_vmcs() if vmcs01 is not
the loaded VMCS when freeing nested resources.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923184452.980-5-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Call guest_state_valid() directly instead of querying emulation_required
when checking if L1 is attempting VM-Enter with invalid guest state.
If emulate_invalid_guest_state is false, KVM will fixup segment regs to
avoid emulation and will never set emulation_required, i.e. KVM will
incorrectly miss the associated consistency checks because the nested
path stuffs segments directly into vmcs02.
Opportunsitically add Consistency Check tracing to make future debug
suck a little less.
Fixes: 2bb8cafea8 ("KVM: vVMX: signal failure for nested VMEntry if emulation_required")
Fixes: 3184a995f7 ("KVM: nVMX: fix vmentry failure code when L2 state would require emulation")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923184452.980-4-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reload vmcs01 when bailing from nested_vmx_enter_non_root_mode() as KVM
expects vmcs01 to be loaded when is_guest_mode() is false.
Fixes: 671ddc700f ("KVM: nVMX: Don't leak L1 MMIO regions to L2")
Cc: stable@vger.kernel.org
Cc: Dan Cross <dcross@google.com>
Cc: Jim Mattson <jmattson@google.com>
Cc: Peter Shier <pshier@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923184452.980-3-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Explicitly reset the segment cache after stuffing guest segment regs in
prepare_vmcs02_rare(). Although the cache is reset when switching to
vmcs02, there is nothing that prevents KVM from re-populating the cache
prior to writing vmcs02 with vmcs12's values. E.g. if the vCPU is
preempted after switching to vmcs02 but before prepare_vmcs02_rare(),
kvm_arch_vcpu_put() will dereference GUEST_SS_AR_BYTES via .get_cpl()
and cache the stale vmcs02 value. While the current code base only
caches stale data in the preemption case, it's theoretically possible
future code could read a segment register during the nested flow itself,
i.e. this isn't technically illegal behavior in kvm_arch_vcpu_put(),
although it did introduce the bug.
This manifests as an unexpected nested VM-Enter failure when running
with unrestricted guest disabled if the above preemption case coincides
with L1 switching L2's CPL, e.g. when switching from a L2 vCPU at CPL3
to to a L2 vCPU at CPL0. stack_segment_valid() will see the new SS_SEL
but the old SS_AR_BYTES and incorrectly mark the guest state as invalid
due to SS.dpl != SS.rpl.
Don't bother updating the cache even though prepare_vmcs02_rare() writes
every segment. With unrestricted guest, guest segments are almost never
read, let alone L2 guest segments. On the other hand, populating the
cache requires a large number of memory writes, i.e. it's unlikely to be
a net win. Updating the cache would be a win when unrestricted guest is
not supported, as guest_state_valid() will immediately cache all segment
registers. But, nested virtualization without unrestricted guest is
dirt slow, saving some VMREADs won't change that, and every CPU
manufactured in the last decade supports unrestricted guest. In other
words, the extra (minor) complexity isn't worth the trouble.
Note, kvm_arch_vcpu_put() may see stale data when querying guest CPL
depending on when preemption occurs. This is "ok" in that the usage is
imperfect by nature, i.e. it's used heuristically to improve performance
but doesn't affect functionality. kvm_arch_vcpu_put() could be "fixed"
by also disabling preemption while loading segments, but that's
pointless and misleading as reading state from kvm_sched_{in,out}() is
guaranteed to see stale data in one form or another. E.g. even if all
the usage of regs_avail is fixed to call kvm_register_mark_available()
after the associated state is set, the individual state might still be
stale with respect to the overall vCPU state. I.e. making functional
decisions in an asynchronous hook is doomed from the get go. Thankfully
KVM doesn't do that.
Fixes: de63ad4cf4 ("KVM: X86: implement the logic for spinlock optimization")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923184452.980-2-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename ops.h to vmx_ops.h to allow adding a tdx_ops.h in the future
without causing massive confusion.
Trust Domain Extensions (TDX) is built on VMX, but KVM cannot directly
access the VMCS(es) for a TDX guest, thus TDX will need its own "ops"
implementation for wrapping the low level operations.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923183112.3030-3-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Extract the posted interrupt code so that it can be reused for Trust
Domain Extensions (TDX), which requires posted interrupts and can use
KVM VMX's implementation almost verbatim. TDX is different enough from
raw VMX that it is highly desirable to implement the guts of TDX in a
separate file, i.e. reusing posted interrupt code by shoving TDX support
into vmx.c would be a mess.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Co-developed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923183112.3030-2-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a helper function and several wrapping macros to consolidate the
copy-paste code in vmx_compute_secondary_exec_control() for adjusting
controls that are dependent on guest CPUID bits.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200925003011.21016-1-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename SECONDARY_EXEC_RDTSCP to SECONDARY_EXEC_ENABLE_RDTSCP in
preparation for consolidating the logic for adjusting secondary exec
controls based on the guest CPUID model.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923165048.20486-4-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If PCID is not exposed to the guest, clear INVPCID in the guest's CPUID
even if the VMCS INVPCID enable is not supported. This will allow
consolidating the secondary execution control adjustment code without
having to special case INVPCID.
Technically, this fixes a bug where !CPUID.PCID && CPUID.INVCPID would
result in unexpected guest behavior (#UD instead of #GP/#PF), but KVM
doesn't support exposing INVPCID if it's not supported in the VMCS, i.e.
such a config is broken/bogus no matter what.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923165048.20486-3-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename helpers for a few controls to conform to the more prevelant style
of cpu_has_vmx_<feature>(). Consistent names will allow adding macros
to consolidate the boilerplate code for adjusting secondary execution
controls.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923165048.20486-2-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use kvm_vcpu_is_illegal_gpa() to check for a legal GPA when validating a
PT output base instead of open coding a clever, but difficult to read,
variant. Code readability is far more important than shaving a few uops
in a slow path.
No functional change intended.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200924194250.19137-6-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename kvm_mmu_is_illegal_gpa() to kvm_vcpu_is_illegal_gpa() and move it
to cpuid.h so that's it's colocated with cpuid_maxphyaddr(). The helper
is not MMU specific and will gain a user that is completely unrelated to
the MMU in a future patch.
No functional change intended.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200924194250.19137-5-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace the subtly not-a-constant MSR_IA32_RTIT_OUTPUT_BASE_MASK with a
proper helper function to check whether or not the specified base is
valid. Blindly referencing the local 'vcpu' is especially nasty.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200924194250.19137-4-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use cpuid_maxphyaddr() instead of cpuid_query_maxphyaddr() for the
RTIT base MSR check. There is no reason to recompute MAXPHYADDR as the
precomputed version is synchronized with CPUID updates, and
MSR_IA32_RTIT_OUTPUT_BASE is not written between stuffing CPUID and
refreshing vcpu->arch.maxphyaddr.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200924194250.19137-2-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The INVD instruction is emulated as a NOP, just skip the instruction
instead.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <addd41be2fbf50f5f4059e990a2a0cff182d2136.1600972918.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add tracepoints for the early consistency checks in nested_vmx_run().
The "VMLAUNCH vs. VMRESUME" check in particular is useful to trace, as
there is no architectural way to check VMCS.LAUNCH_STATE, and subtle
bugs such as VMCLEAR on the wrong HPA can lead to confusing errors in
the L1 VMM.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200812180615.22372-1-sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On successful nested VM-Enter, check for pending interrupts and convert
the highest priority interrupt to a pending posted interrupt if it
matches L2's notification vector. If the vCPU receives a notification
interrupt before nested VM-Enter (assuming L1 disables IRQs before doing
VM-Enter), the pending interrupt (for L1) should be recognized and
processed as a posted interrupt when interrupts become unblocked after
VM-Enter to L2.
This fixes a bug where L1/L2 will get stuck in an infinite loop if L1 is
trying to inject an interrupt into L2 by setting the appropriate bit in
L2's PIR and sending a self-IPI prior to VM-Enter (as opposed to KVM's
method of manually moving the vector from PIR->vIRR/RVI). KVM will
observe the IPI while the vCPU is in L1 context and so won't immediately
morph it to a posted interrupt for L2. The pending interrupt will be
seen by vmx_check_nested_events(), cause KVM to force an immediate exit
after nested VM-Enter, and eventually be reflected to L1 as a VM-Exit.
After handling the VM-Exit, L1 will see that L2 has a pending interrupt
in PIR, send another IPI, and repeat until L2 is killed.
Note, posted interrupts require virtual interrupt deliveriy, and virtual
interrupt delivery requires exit-on-interrupt, ergo interrupts will be
unconditionally unmasked on VM-Enter if posted interrupts are enabled.
Fixes: 705699a139 ("KVM: nVMX: Enable nested posted interrupt processing")
Cc: stable@vger.kernel.org
Cc: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200812175129.12172-1-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rework NMI VM-Exit handling to invoke the kernel handler by function
call instead of INTn. INTn microcode is relatively expensive, and
aligning the IRQ and NMI handling will make it easier to update KVM
should some newfangled method for invoking the handlers come along.
Suggested-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200915191505.10355-3-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the asm blob that invokes the appropriate IRQ handler after VM-Exit
into a proper subroutine. Unconditionally create a stack frame in the
subroutine so that, as objtool sees things, the function has standard
stack behavior. The dynamic stack adjustment makes using unwind hints
problematic.
Suggested-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200915191505.10355-2-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace the existing kvm_x86_ops.need_emulation_on_page_fault() with a
more generic is_emulatable(), and unconditionally call the new function
in x86_emulate_instruction().
KVM will use the generic hook to support multiple security related
technologies that prevent emulation in one way or another. Similar to
the existing AMD #NPF case where emulation of the current instruction is
not possible due to lack of information, AMD's SEV-ES and Intel's SGX
and TDX will introduce scenarios where emulation is impossible due to
the guest's register state being inaccessible. And again similar to the
existing #NPF case, emulation can be initiated by kvm_mmu_page_fault(),
i.e. outside of the control of vendor-specific code.
While the cause and architecturally visible behavior of the various
cases are different, e.g. SGX will inject a #UD, AMD #NPF is a clean
resume or complete shutdown, and SEV-ES and TDX "return" an error, the
impact on the common emulation code is identical: KVM must stop
emulation immediately and resume the guest.
Query is_emulatable() in handle_ud() as well so that the
force_emulation_prefix code doesn't incorrectly modify RIP before
calling emulate_instruction() in the absurdly unlikely scenario that
KVM encounters forced emulation in conjunction with "do not emulate".
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200915232702.15945-1-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, prepare_vmcs02_early() does not check if the "unrestricted guest"
VM-execution control in vmcs12 is turned off and leaves the corresponding
bit on in vmcs02. Due to this setting, vmentry checks which are supposed to
render the nested guest state as invalid when this VM-execution control is
not set, are passing in hardware.
This patch turns off the "unrestricted guest" VM-execution control in vmcs02
if vmcs12 has turned it off.
Suggested-by: Jim Mattson <jmattson@google.com>
Suggested-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Message-Id: <20200921081027.23047-2-krish.sadhukhan@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
INVPCID instruction handling is mostly same across both VMX and
SVM. So, move the code to common x86.c.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <159985255212.11252.10322694343971983487.stgit@bmoger-ubuntu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Handling of kvm_read/write_guest_virt*() errors can be moved to common
code. The same code can be used by both VMX and SVM.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <159985254493.11252.6603092560732507607.stgit@bmoger-ubuntu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All the checks in lapic_timer_int_injected(), __kvm_wait_lapic_expire(), and
these function calls waste cpu cycles when the timer mode is not tscdeadline.
We can observe ~1.3% world switch time overhead by kvm-unit-tests/vmexit.flat
vmcall testing on AMD server. This patch reduces the world switch latency
caused by timer_advance_ns feature when the timer mode is not tscdeadline by
simpling move the check against apic->lapic_timer.expired_tscdeadline much
earlier.
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1599731444-3525-7-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The nested VMX controls MSRs can be initialized by the global capability
values stored in vmcs_config.
Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20200828085622.8365-6-chenyi.qiang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM supports the nested VM_{EXIT, ENTRY}_LOAD_IA32_PERF_GLOBAL_CTRL and
VM_{ENTRY_LOAD, EXIT_CLEAR}_BNDCFGS, but they are not exposed by the
system ioctl KVM_GET_MSR. Add them to the setup of nested VMX controls MSR.
Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com>
Message-Id: <20200828085622.8365-2-chenyi.qiang@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
with a better API in 5.10 or 5.11, for now this is a fix
that works with existing userspace but keeps the current
ugly API.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl9ufLMUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMe9AgAgU3YQ2SktkqEOXjHMLqCH5Y3PKFI
S2anYpoKlH36Q6kzoqtkCj0GVagvdh5+Envz3I/tMdhv3Y/JgZaX1wHAe4cUl9BT
VyoiDBTWkhYRmpUbLYA8AtmgxQw1Hp8srH86rnvVGmLG6zdAa/rgUAKiQgT688Ej
CQvF5H7Zi3viPo2rInNSkgTIgewduqSWkwJ6+h4AQMmNJpbRaeZs45yMYyyu/FIi
hUazy7Rwk2vkWcuTd/sqH9b9y3VCYpN9juRaehEiK8qxXT3ydTU4Tub25BHmvXdr
dx5pShG4P3nAGnfV1qKAemyQcY7sjfMieqN1F3QcsRcxqZgySUm11o2JRw==
=sHsX
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull more kvm fixes from Paolo Bonzini:
"Five small fixes.
The nested migration bug will be fixed with a better API in 5.10 or
5.11, for now this is a fix that works with existing userspace but
keeps the current ugly API"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SVM: Add a dedicated INVD intercept routine
KVM: x86: Reset MMU context if guest toggles CR4.SMAP or CR4.PKE
KVM: x86: fix MSR_IA32_TSC read for nested migration
selftests: kvm: Fix assert failure in single-step test
KVM: x86: VMX: Make smaller physical guest address space support user-configurable
This patch exposes allow_smaller_maxphyaddr to the user as a module parameter.
Since smaller physical address spaces are only supported on VMX, the
parameter is only exposed in the kvm_intel module.
For now disable support by default, and let the user decide if they want
to enable it.
Modifications to VMX page fault and EPT violation handling will depend
on whether that parameter is enabled.
Signed-off-by: Mohammed Gamal <mgamal@redhat.com>
Message-Id: <20200903141122.72908-1-mgamal@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Multiple stolen time fixes, with a new capability to match x86
- Fix for hugetlbfs mappings when PUD and PMD are the same level
- Fix for hugetlbfs mappings when PTE mappings are enforced
(dirty logging, for example)
- Fix tracing output of 64bit values
x86:
- nSVM state restore fixes
- Async page fault fixes
- Lots of small fixes everywhere
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl9dM5kUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroM+Iwf+LbISO7ccpPMK1kKtOeug/jZv+xQA
sVaBGRzYo+k2e0XtV8E8IV4N30FBtYSwXsbBKkMAoy2FpmMebgDWDQ7xspb6RJMS
/y8t1iqPwdOaLIkUkgc7UihSTlZm05Es3f3q6uZ9+oaM4Fe+V7xWzTUX4Oy89JO7
KcQsTD7pMqS4bfZGADK781ITR/WPgCi0aYx5s6dcwcZAQXhb1K1UKEjB8OGKnjUh
jliReJtxRA16rjF+S5aJ7L07Ce/ksrfwkI4NXJ4GxW+lyOfVNdSBJUBaZt1m7G2M
1We5+i5EjKCjuxmgtUUUfVdazpj1yl+gBGT7KKkLte9T9WZdXyDnixAbvg==
=OFb3
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"A bit on the bigger side, mostly due to me being on vacation, then
busy, then on parental leave, but there's nothing worrisome.
ARM:
- Multiple stolen time fixes, with a new capability to match x86
- Fix for hugetlbfs mappings when PUD and PMD are the same level
- Fix for hugetlbfs mappings when PTE mappings are enforced (dirty
logging, for example)
- Fix tracing output of 64bit values
x86:
- nSVM state restore fixes
- Async page fault fixes
- Lots of small fixes everywhere"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (25 commits)
KVM: emulator: more strict rsm checks.
KVM: nSVM: more strict SMM checks when returning to nested guest
SVM: nSVM: setup nested msr permission bitmap on nested state load
SVM: nSVM: correctly restore GIF on vmexit from nesting after migration
x86/kvm: don't forget to ACK async PF IRQ
x86/kvm: properly use DEFINE_IDTENTRY_SYSVEC() macro
KVM: VMX: Don't freeze guest when event delivery causes an APIC-access exit
KVM: SVM: avoid emulation with stale next_rip
KVM: x86: always allow writing '0' to MSR_KVM_ASYNC_PF_EN
KVM: SVM: Periodically schedule when unregistering regions on destroy
KVM: MIPS: Change the definition of kvm type
kvm x86/mmu: use KVM_REQ_MMU_SYNC to sync when needed
KVM: nVMX: Fix the update value of nested load IA32_PERF_GLOBAL_CTRL control
KVM: fix memory leak in kvm_io_bus_unregister_dev()
KVM: Check the allocation of pv cpu mask
KVM: nVMX: Update VMCS02 when L2 PAE PDPTE updates detected
KVM: arm64: Update page shift if stage 2 block mapping not supported
KVM: arm64: Fix address truncation in traces
KVM: arm64: Do not try to map PUDs when they are folded into PMD
arm64/x86: KVM: Introduce steal-time cap
...
According to SDM 27.2.4, Event delivery causes an APIC-access VM exit.
Don't report internal error and freeze guest when event delivery causes
an APIC-access exit, it is handleable and the event will be re-injected
during the next vmentry.
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1597827327-25055-2-git-send-email-wanpengli@tencent.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A minor fix for the update of VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL field
in exit_ctls_high.
Fixes: 03a8871add ("KVM: nVMX: Expose load IA32_PERF_GLOBAL_CTRL
VM-{Entry,Exit} control")
Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20200828085622.8365-5-chenyi.qiang@intel.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When L2 uses PAE, L0 intercepts of L2 writes to CR0/CR3/CR4 call
load_pdptrs to read the possibly updated PDPTEs from the guest
physical address referenced by CR3. It loads them into
vcpu->arch.walk_mmu->pdptrs and sets VCPU_EXREG_PDPTR in
vcpu->arch.regs_dirty.
At the subsequent assumed reentry into L2, the mmu will call
vmx_load_mmu_pgd which calls ept_load_pdptrs. ept_load_pdptrs sees
VCPU_EXREG_PDPTR set in vcpu->arch.regs_dirty and loads
VMCS02.GUEST_PDPTRn from vcpu->arch.walk_mmu->pdptrs[]. This all works
if the L2 CRn write intercept always resumes L2.
The resume path calls vmx_check_nested_events which checks for
exceptions, MTF, and expired VMX preemption timers. If
vmx_check_nested_events finds any of these conditions pending it will
reflect the corresponding exit into L1. Live migration at this point
would also cause a missed immediate reentry into L2.
After L1 exits, vmx_vcpu_run calls vmx_register_cache_reset which
clears VCPU_EXREG_PDPTR in vcpu->arch.regs_dirty. When L2 next
resumes, ept_load_pdptrs finds VCPU_EXREG_PDPTR clear in
vcpu->arch.regs_dirty and does not load VMCS02.GUEST_PDPTRn from
vcpu->arch.walk_mmu->pdptrs[]. prepare_vmcs02 will then load
VMCS02.GUEST_PDPTRn from vmcs12->pdptr0/1/2/3 which contain the stale
values stored at last L2 exit. A repro of this bug showed L2 entering
triple fault immediately due to the bad VMCS02.GUEST_PDPTRn values.
When L2 is in PAE paging mode add a call to ept_load_pdptrs before
leaving L2. This will update VMCS02.GUEST_PDPTRn if they are dirty in
vcpu->arch.walk_mmu->pdptrs[].
Tested:
kvm-unit-tests with new directed test: vmx_mtf_pdpte_test.
Verified that test fails without the fix.
Also ran Google internal VMM with an Ubuntu 16.04 4.4.0-83 guest running a
custom hypervisor with a 32-bit Windows XP L2 guest using PAE. Prior to fix
would repro readily. Ran 14 simultaneous L2s for 140 iterations with no
failures.
Signed-off-by: Peter Shier <pshier@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <20200820230545.2411347-1-pshier@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Header frame.h is getting more code annotations to help objtool analyze
object files.
Rename the file to objtool.h.
[ jpoimboe: add objtool.h to MAINTAINERS ]
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
x86:
* Report last CPU for debugging
* Emulate smaller MAXPHYADDR in the guest than in the host
* .noinstr and tracing fixes from Thomas
* nested SVM page table switching optimization and fixes
Generic:
* Unify shadow MMU cache data structures across architectures
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl8pC+oUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNcOwgAjomqtEqQNlp7DdZT7VyyklzbxX1/
ud7v+oOJ8K4sFlf64lSthjPo3N9rzZCcw+yOXmuyuITngXOGc3tzIwXpCzpLtuQ1
WO1Ql3B/2dCi3lP5OMmsO1UAZqy9pKLg1dfeYUPk48P5+p7d/NPmk+Em5kIYzKm5
JsaHfCp2EEXomwmljNJ8PQ1vTjIQSSzlgYUBZxmCkaaX7zbEUMtxAQCStHmt8B84
33LczwXBm3viSWrzsoBV37I70+tseugiSGsCfUyupXOvq55d6D9FCqtCb45Hn4Vh
Ik8ggKdalsk/reiGEwNw1/3nr6mRMkHSbl+Mhc4waOIFf9dn0urgQgOaDg==
=YVx0
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"s390:
- implement diag318
x86:
- Report last CPU for debugging
- Emulate smaller MAXPHYADDR in the guest than in the host
- .noinstr and tracing fixes from Thomas
- nested SVM page table switching optimization and fixes
Generic:
- Unify shadow MMU cache data structures across architectures"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (127 commits)
KVM: SVM: Fix sev_pin_memory() error handling
KVM: LAPIC: Set the TDCR settable bits
KVM: x86: Specify max TDP level via kvm_configure_mmu()
KVM: x86/mmu: Rename max_page_level to max_huge_page_level
KVM: x86: Dynamically calculate TDP level from max level and MAXPHYADDR
KVM: VXM: Remove temporary WARN on expected vs. actual EPTP level mismatch
KVM: x86: Pull the PGD's level from the MMU instead of recalculating it
KVM: VMX: Make vmx_load_mmu_pgd() static
KVM: x86/mmu: Add separate helper for shadow NPT root page role calc
KVM: VMX: Drop a duplicate declaration of construct_eptp()
KVM: nSVM: Correctly set the shadow NPT root level in its MMU role
KVM: Using macros instead of magic values
MIPS: KVM: Fix build error caused by 'kvm_run' cleanup
KVM: nSVM: remove nonsensical EXITINFO1 adjustment on nested NPF
KVM: x86: Add a capability for GUEST_MAXPHYADDR < HOST_MAXPHYADDR support
KVM: VMX: optimize #PF injection when MAXPHYADDR does not match
KVM: VMX: Add guest physical address check in EPT violation and misconfig
KVM: VMX: introduce vmx_need_pf_intercept
KVM: x86: update exception bitmap on CPUID changes
KVM: x86: rename update_bp_intercept to update_exception_bitmap
...
this has been brought into a shape which is maintainable and actually
works.
This final version was done by Sasha Levin who took it up after Intel
dropped the ball. Sasha discovered that the SGX (sic!) offerings out there
ship rogue kernel modules enabling FSGSBASE behind the kernels back which
opens an instantanious unpriviledged root hole.
The FSGSBASE instructions provide a considerable speedup of the context
switch path and enable user space to write GSBASE without kernel
interaction. This enablement requires careful handling of the exception
entries which go through the paranoid entry path as they cannot longer rely
on the assumption that user GSBASE is positive (as enforced via prctl() on
non FSGSBASE enabled systemn). All other entries (syscalls, interrupts and
exceptions) can still just utilize SWAPGS unconditionally when the entry
comes from user space. Converting these entries to use FSGSBASE has no
benefit as SWAPGS is only marginally slower than WRGSBASE and locating and
retrieving the kernel GSBASE value is not a free operation either. The real
benefit of RD/WRGSBASE is the avoidance of the MSR reads and writes.
The changes come with appropriate selftests and have held up in field
testing against the (sanitized) Graphene-SGX driver.
-----BEGIN PGP SIGNATURE-----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=QaAN
-----END PGP SIGNATURE-----
Merge tag 'x86-fsgsbase-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fsgsbase from Thomas Gleixner:
"Support for FSGSBASE. Almost 5 years after the first RFC to support
it, this has been brought into a shape which is maintainable and
actually works.
This final version was done by Sasha Levin who took it up after Intel
dropped the ball. Sasha discovered that the SGX (sic!) offerings out
there ship rogue kernel modules enabling FSGSBASE behind the kernels
back which opens an instantanious unpriviledged root hole.
The FSGSBASE instructions provide a considerable speedup of the
context switch path and enable user space to write GSBASE without
kernel interaction. This enablement requires careful handling of the
exception entries which go through the paranoid entry path as they
can no longer rely on the assumption that user GSBASE is positive (as
enforced via prctl() on non FSGSBASE enabled systemn).
All other entries (syscalls, interrupts and exceptions) can still just
utilize SWAPGS unconditionally when the entry comes from user space.
Converting these entries to use FSGSBASE has no benefit as SWAPGS is
only marginally slower than WRGSBASE and locating and retrieving the
kernel GSBASE value is not a free operation either. The real benefit
of RD/WRGSBASE is the avoidance of the MSR reads and writes.
The changes come with appropriate selftests and have held up in field
testing against the (sanitized) Graphene-SGX driver"
* tag 'x86-fsgsbase-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
x86/fsgsbase: Fix Xen PV support
x86/ptrace: Fix 32-bit PTRACE_SETREGS vs fsbase and gsbase
selftests/x86/fsgsbase: Add a missing memory constraint
selftests/x86/fsgsbase: Fix a comment in the ptrace_write_gsbase test
selftests/x86: Add a syscall_arg_fault_64 test for negative GSBASE
selftests/x86/fsgsbase: Test ptracer-induced GS base write with FSGSBASE
selftests/x86/fsgsbase: Test GS selector on ptracer-induced GS base write
Documentation/x86/64: Add documentation for GS/FS addressing mode
x86/elf: Enumerate kernel FSGSBASE capability in AT_HWCAP2
x86/cpu: Enable FSGSBASE on 64bit by default and add a chicken bit
x86/entry/64: Handle FSGSBASE enabled paranoid entry/exit
x86/entry/64: Introduce the FIND_PERCPU_BASE macro
x86/entry/64: Switch CR3 before SWAPGS in paranoid entry
x86/speculation/swapgs: Check FSGSBASE in enabling SWAPGS mitigation
x86/process/64: Use FSGSBASE instructions on thread copy and ptrace
x86/process/64: Use FSBSBASE in switch_to() if available
x86/process/64: Make save_fsgs_for_kvm() ready for FSGSBASE
x86/fsgsbase/64: Enable FSGSBASE instructions in helper functions
x86/fsgsbase/64: Add intrinsics for FSGSBASE instructions
x86/cpu: Add 'unsafe_fsgsbase' to enable CR4.FSGSBASE
...
to the generic code. Pretty much a straight forward 1:1 conversion plus the
consolidation of the KVM handling of pending work before entering guest
mode.
-----BEGIN PGP SIGNATURE-----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=84y7
-----END PGP SIGNATURE-----
Merge tag 'x86-entry-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 conversion to generic entry code from Thomas Gleixner:
"The conversion of X86 syscall, interrupt and exception entry/exit
handling to the generic code.
Pretty much a straight-forward 1:1 conversion plus the consolidation
of the KVM handling of pending work before entering guest mode"
* tag 'x86-entry-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/kvm: Use __xfer_to_guest_mode_work_pending() in kvm_run_vcpu()
x86/kvm: Use generic xfer to guest work function
x86/entry: Cleanup idtentry_enter/exit
x86/entry: Use generic interrupt entry/exit code
x86/entry: Cleanup idtentry_entry/exit_user
x86/entry: Use generic syscall exit functionality
x86/entry: Use generic syscall entry function
x86/ptrace: Provide pt_regs helper for entry/exit
x86/entry: Move user return notifier out of loop
x86/entry: Consolidate 32/64 bit syscall entry
x86/entry: Consolidate check_user_regs()
x86: Correct noinstr qualifiers
x86/idtentry: Remove stale comment
Capture the max TDP level during kvm_configure_mmu() instead of using a
kvm_x86_ops hook to do it at every vCPU creation.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200716034122.5998-10-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Calculate the desired TDP level on the fly using the max TDP level and
MAXPHYADDR instead of doing the same when CPUID is updated. This avoids
the hidden dependency on cpuid_maxphyaddr() in vmx_get_tdp_level() and
also standardizes the "use 5-level paging iff MAXPHYADDR > 48" behavior
across x86.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200716034122.5998-8-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the WARN in vmx_load_mmu_pgd() that was temporarily added to aid
bisection/debug in the event the current MMU's shadow root level didn't
match VMX's computed EPTP level.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200716034122.5998-7-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the shadow_root_level from the current MMU as the root level for the
PGD, i.e. for VMX's EPTP. This eliminates the weird dependency between
VMX and the MMU where both must independently calculate the same root
level for things to work correctly. Temporarily keep VMX's calculation
of the level and use it to WARN if the incoming level diverges.
Opportunistically refactor kvm_mmu_load_pgd() to avoid indentation hell,
and rename a 'cr3' param in the load_mmu_pgd prototype that managed to
survive the cr3 purge.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200716034122.5998-6-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make vmx_load_mmu_pgd() static as it is no longer invoked directly by
nested VMX (or any code for that matter).
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200716034122.5998-5-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove an extra declaration of construct_eptp() from vmx.h.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200716034122.5998-4-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
hdr.vmx.flags is meant for future extensions to the ABI, rejecting
invalid flags is necessary to avoid broken half-loads of the
nVMX state.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A missing VMCS12 was not causing -EINVAL (it was just read with
copy_from_user, so it is not a security issue, but it is still
wrong). Test for VMCS12 validity and reject the nested state
if a VMCS12 is required but not present.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the generic infrastructure to check for and handle pending work before
transitioning into guest mode.
This now handles TIF_NOTIFY_RESUME as well which was ignored so
far. Handling it is important as this covers task work and task work will
be used to offload the heavy lifting of POSIX CPU timers to thread context.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200722220520.979724969@linutronix.de
This patch adds a new capability KVM_CAP_SMALLER_MAXPHYADDR which
allows userspace to query if the underlying architecture would
support GUEST_MAXPHYADDR < HOST_MAXPHYADDR and hence act accordingly
(e.g. qemu can decide if it should warn for -cpu ..,phys-bits=X)
The complications in this patch are due to unexpected (but documented)
behaviour we see with NPF vmexit handling in AMD processor. If
SVM is modified to add guest physical address checks in the NPF
and guest #PF paths, we see the followning error multiple times in
the 'access' test in kvm-unit-tests:
test pte.p pte.36 pde.p: FAIL: pte 2000021 expected 2000001
Dump mapping: address: 0x123400000000
------L4: 24c3027
------L3: 24c4027
------L2: 24c5021
------L1: 1002000021
This is because the PTE's accessed bit is set by the CPU hardware before
the NPF vmexit. This is handled completely by hardware and cannot be fixed
in software.
Therefore, availability of the new capability depends on a boolean variable
allow_smaller_maxphyaddr which is set individually by VMX and SVM init
routines. On VMX it's always set to true, on SVM it's only set to true
when NPT is not enabled.
CC: Tom Lendacky <thomas.lendacky@amd.com>
CC: Babu Moger <babu.moger@amd.com>
Signed-off-by: Mohammed Gamal <mgamal@redhat.com>
Message-Id: <20200710154811.418214-10-mgamal@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ignore non-present page faults, since those cannot have reserved
bits set.
When running access.flat with "-cpu Haswell,phys-bits=36", the
number of trapped page faults goes down from 8872644 to 3978948.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200710154811.418214-9-mgamal@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Jim Mattson