Commit Graph

1834 Commits

Author SHA1 Message Date
Nathan Lynch 4297c9869b [POWERPC] Maple: use mmio nvram
Some systems supported by the maple platform (e.g. JS2x blades running
SLOF) are able to use the mmio_nvram backend for reading and writing
nvram.  This is an improvement over the current situation -- no nvram
access from userspace at all.

Select MMIO_NVRAM for the maple platform.

Initialize the mmio_nvram backend from maple setup code.

Signed-off-by: Nathan Lynch <ntl@pobox.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:23 +11:00
Olof Johansson 721e0c9037 [POWERPC] pasemi: defconfig
Base pasemi defconfig. Nothing special, just the native drivers plus
common PCI-express/PCI cards.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:22 +11:00
Olof Johansson 31c56d820e [POWERPC] pasemi: iommu support
I/O TLB support for PA6T-1682M.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:22 +11:00
Olof Johansson f9fba5b72d [POWERPC] pasemi: Configure DMA controller interrupts
The DMA controller on PWRficient is somewhat special -- has a PCI header
so it looks like it's on the root PCI (-Express) root bus, but it uses
more than the default number of interrupts (and they are hardwired).

We need to wire up all interrupts for the DMA controller. The generic
IRQ code will only map the primary interrupt from the PCI header (128),
so add 129->211 by hand.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:22 +11:00
Olof Johansson c388cfebbf [POWERPC] pasemi: SMP timebase sync
Timebase update is simple on PA6T, since global updates can be done from
one core by writing to an SPR.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:22 +11:00
Olof Johansson f620be99e9 [POWERPC] pasemi: Implement restart
Implement reset on platforms/pasemi. Default is just to reset the
cpu using the SDC registers.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:22 +11:00
Olof Johansson 1199919b69 [POWERPC] pasemi: Idle loops
Powersave support on PA6T. Right now it only uses 'doze' mode, and
will default to no savings (spin).

Signed-off-by: Olof Johansson <olof@lixom.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:22 +11:00
Olof Johansson bfed9d32d9 [POWERPC] pasemi: Machine check handler
Print out decoded machine check information on PA6T.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:22 +11:00
Olof Johansson 39c870d5b5 [POWERPC] pasemi: UART udbg support
Early debug output for PA Semi UART. Uses the 2.05 CI real mode ops.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:22 +11:00
Pavel Roskin a1fdf6940a [POWERPC] Assign all PCI busses on G3 Blue & White
G3 Blue & White is misconfigured by default so that CardBus controllers
in PCI slots don't work.  The PCI bridge is programmed to only allow
access to bus 1 but not higher busses.

The patch forces the PCI busses to be reassigned if a Grackle controller
is found and the machine identifies itself as "PowerMac1,1"

Signed-off-by: Pavel Roskin <proski@gnu.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:22 +11:00
Ishizaki Kou 6e47a0f382 [POWERPC] Celleb: add celleb_defconfig
This patch creates defconfig file for Celleb platform.

Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:22 +11:00
Ishizaki Kou c347b7989e [POWERPC] Celleb: basic support
This patch adds base support for Celleb platform.

Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:21 +11:00
Ishizaki Kou e107931956 [POWERPC] Celleb: support spu priv1 ops
SPU support routines for Celleb platform.

Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:21 +11:00
Ishizaki Kou c9868fe0e0 [POWERPC] Celleb: consolidate spu management ops
Spu management ops in arch/platforms/cell/spu_priv1_mmio.h can be used
commonly in of based platform. This patch separates spu management ops
from native cell code and uses on celleb platform.

Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:21 +11:00
Ishizaki Kou d7480a9fea [POWERPC] Celleb: support udbg
This patch adds udbg support for Celleb platform.

Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:21 +11:00
Ishizaki Kou fe4a0cf1c2 [POWERPC] Celleb: htab routines
Adds htab routines for Celleb platform.

Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:21 +11:00
Ishizaki Kou 97a9b58409 [POWERPC] Celleb: support iommu
This patch creates Celleb platform dependent file to support iommu.

Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:21 +11:00
Ishizaki Kou 7163c7c9d2 [POWERPC] Celleb: setup usb host controller in SCC
USB host controller in SCC requires enable sequence. It should be done
before USB host drivers start.

Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:21 +11:00
Ishizaki Kou 32f39b055f [POWERPC] Celleb: support interrupts
This patch creates Celleb platform dependent files to support interrupts.

Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:21 +11:00
Ishizaki Kou b8a590c496 [POWERPC] Celleb: interfaces to the hypervisor
This patch creates Celleb platform dependent files which add
interfaces to call hypervisor.

Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:21 +11:00
Jiri Kosina c23ef29c1e [POWERPC] powermac: local_irq_disable() is redundant after local_irq_save()
arch/powerpc/platforms/powermac/smp.c::smp_core99_kick_cpu() contains
local_irq_disable() call after local_irq_save(). This looks
redundant.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:20 +11:00
Jiri Kosina f79ce995d0 [POWERPC] 86xx: local_irq_disable() is redundant after local_irq_save()
arch/powerpc/platforms/86xx/mpc86xx_smp.c::smp_86xx_kick_cpu() contains
local_irq_disable() call after local_irq_save(). This looks
redundant.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:20 +11:00
Vitaly Bordug c4cbfd64f9 [POWERPC] mpc8272ads: defconfig
Default config file for mpc8272ads (powerpc port).Though relevant bits went
in, it is required to keep proper default configuration for the target,
which seems to be missed initially.

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:20 +11:00
Vitaly Bordug 5427828e83 [POWERPC] Fix kernel build errors for mpc8272ads and mpc8560ads
Recent update of asm-powerpc/io.h caused cpm-related stuff to break in the
current kernel. Current patch fixes it, as well as other inconsistencies
expressed, that do not permit targets from working properly:

- Updated dts with a chosen node with interrupt controller,
- fixed messed device IDs among CPM2 SoC devices,
- corrected odd header name and fixed type in defines,
- Added 82xx subdir to the powerpc/platforms Makefile, missed during
  initial commit,
- new solely-powerpc header file for 8260 family (was using one from
  arch/ppc, this one cleaned up from the extra stuff), in fact for now
  a placeholder to get the board-specific includes for stuff not yet
  capable to live with devicetree peeks only
- Fixed couple of misprints in reference mpc8272 dts.

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:20 +11:00
Vitaly Bordug 73844ecbaa [POWERPC] cpm2: CPM2 interrupt controller fix
This contains important fixes for the CPM2 PIC code. Eliminated
CPM_IRQ_OFFSET, pulling the respective interrupt numbers from the interrupt
mapping. Updated devicetree files to reflect that. Changed direct
IC-related IO accesses to the IO accessors. Fixed all the sense values to
keep coherency with ipic. In the current code, CPM2 stuff will have no IRQs
and hence could be hardly usable.

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:20 +11:00
Geoff Levand c19cdcb1b8 [POWERPC] PS3: Enable USB mass storage
Update ps3_defconfig to enable USB mass storage and VFAT.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:20 +11:00
Geoff Levand 35063bb2ea [POWERPC] PS3: Fix DMA scatter-gather
Add the missing pieces to support DMA scatter-gather on the PS3 system bus.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:20 +11:00
Geoff Levand 2a08ea69a3 [POWERPC] PS3: Move system bus to platform directory
Move the PS3 system bus routines from drivers/ps3 to
arch/powerpc/platforms/ps3.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:19 +11:00
Robert P. J. Day 63c2f782e8 [POWERPC] Add "is_power_of_2" checking to log2.h.
Add the inline function "is_power_of_2()" to log2.h, where the value
zero is *not* considered to be a power of two.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:19 +11:00
Olof Johansson 7df2457db8 [POWERPC] MPIC: support more than 256 sources
Allow more than the default 256 MPIC sources. Allocates a new flag
(MPIC_LARGE_VECTORS) to be used by platform code when instantiating
the mpic.

I picked 11 bits worth right now since it would cover the number of
sources on any hardware I have seen. It can always be increased later
if needed.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:19 +11:00
Olof Johansson 6529c13dfe [POWERPC] PA6T PMC support
Support for PA6T-style PMC registers.

PMCs are completely implementation-dependent on PPC, and PA6T numbers them
differently from the IBM model.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:19 +11:00
Olof Johansson 1bd2e5ae18 [POWERPC] Add PMC type to cputable
Add cputable entries for which type of PMC implementation the processor
has.

I've only filled in the current 64-bit processors, the unfilled default
value will have same behaviour as before so it can be done over time
as needed.

Also tidy up the dummy_perf implementation a bit, aggregating it into
one function with ifdefs instead of several.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:19 +11:00
Olof Johansson c69b767a2c [POWERPC] Oprofile cleanup
Clean up the ctr_read/write a bit. It's currently defined in the
include but only used in one C file each. The only exception is the
classic version, so keep that in the include and define in the C file
as appropriate.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:19 +11:00
Timur Tabi 4942bd80e8 [POWERPC] Fix array indexing error in rheap grow()
The grow() function in the rheap library allocates a larger array of blocks,
copies the contents of the old blocks array to the newly allocated array and
fixes the list_head pointers after the copy.  At the end, the new blocks must
be enqueued to the empty_list of the rh_info_t structure.  This patch fixes
a bug where the code was indexing past the end of the array when enqueueing
blocks.  The UCC ethernet driver, which uses the rheap allocator, experiences
kernel panics because of this bug.

Signed-off-by: Ionut Nicu <ionut.nicu@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:19 +11:00
Geoff Levand 5f3162f066 [POWERPC] ps3: ps3_defconfig updates
Updates for ps3_defconfig.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:19 +11:00
Geert Uytterhoeven 098e274427 [POWERPC] ps3: get av_multi_out params
Allow the PS3 AV settings driver to access the default video mode stored in
the OS area.

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:18 +11:00
Geoff Levand 66b44954f8 [POWERPC] ps3: get firmware version
Add a new routine ps3_get_firmware_version() and use it to output the firmware
version to dmesg.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:18 +11:00
Geoff Levand 73d976b339 [POWERPC] ps3: remove cpuinfo
Remove the unneded routine ps3_show_cpuinfo().  The common platform code now
prints the same information.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:18 +11:00
Geoff Levand 577157659f [POWERPC] ps3: fix interrupt bmp
Add a comment and a preprocessor macro to help clearify the alignment
needs of the PS3 interrupt bitmap.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:18 +11:00
Geert Uytterhoeven b1eeb38e45 [POWERPC] ps3: add interrupt alloc for outlets
PS3 interrupt core update:
  - Add ps3_alloc_irq() and ps3_free_irq(), to allocate a virtual interrupt
    number for an interrupt outlet, which is needed by the PS3 GPU frame
    buffer device and audio drivers

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:18 +11:00
Geoff Levand 861be32ce7 [POWERPC] ps3: bind interrupt to cpu
Change the PS3 irq allocation routines to take an argument indicating which
cpu (processor thread) the interrupt should be serviced on.

The current system configuration favors device interrupts that are serviced
on cpu0, so that is used as the default.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:18 +11:00
Benjamin Herrenschmidt 9cf9e19667 [POWERPC] ps3: cleanup interrupt bmp routines
Change the PS3 interrupt bitmask routines to be lockless.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:18 +11:00
Geoff Levand 407e24a0c7 [POWERPC] ps3: smp interrupt fixes
PS3 fixups for interrups on SMP.

Fixes the alignment of the interrupt status bitmap, changes the hypervisor
interrupt calls to the '_ext' versions that take an explicit processor
thread ID.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:18 +11:00
Geoff Levand 9633ac8d17 [POWERPC] ps3: rename interrupt symbols
Rename some PS3 interrupt symbols to avoid name clashes and aid debugging.
No change to code.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:18 +11:00
Geoff Levand a8229a9e52 [POWERPC] ps3: fix struct alignment attributes
Remove incorrect alignment attributes in PS3 platform code for
struct spe_shadow, struct os_area_header, and struct os_area_params.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:18 +11:00
Geert Uytterhoeven 6c7be7d385 [POWERPC] ps3: repository storage support
Handle storage-related repository data:
  - Add missing implementations of ps3_repository_read_stor_*() repository
    accessors.
  - Dump storage properties in debug mode
  - Add PS3_DEV_TYPE_STOR_{DISK,ROM,FLASH} device types (which are identical to
    the corresponding SCSI device types) to enum ps3_dev_type

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:17 +11:00
Geoff Levand eebb81c13a [POWERPC] ps3: repository misc fixes
Various fixes for the PS3 repository code:

  - Sync signatures of function prototypes and implementations (enum vs.
    unsigned int)
  - Correct references to `regions' as `registers':
      o Correct enum ps3_region_type as enum ps3_reg_type,
      o Correct PS3_REGION_TYPE_* as PS3_REG_TYPE_*,
      o Correct ps3_repository_find_region() as ps3_repository_find_reg().
  - Correct function name in pr_debug() call
  - Minor error condition improvements.

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:17 +11:00
Linas Vepstas 25c4a46f0e [POWERPC] pSeries: EEH improperly enabled for some Power4 systems
It appears that EEH is improperly enabled for some Power4 systems.
On these systems, the ibm,set-eeh-option returns a value of success
even when EEH is not supported on the given node. Thus, an explicit
check for support is required.

During boot, on power4, without this patch, one sees messages
similar to:

EEH: event on unsupported device, rc=0 dn=/pci@400000000110/IBM,sp@1
EEH: event on unsupported device, rc=0 dn=/pci@400000000110/pci@2
EEH: event on unsupported device, rc=0 dn=/pci@400000000110/pci@2,2
etc.

The patch makes these go away.

Without this patch, EEH recovery does seem to work correctly for
at least some devices (I tested ethernet e1000), but fails to
recover others (the Emulex LightPulse LPFC, most notably).
Off the top of my head, I don't remember why some devices are
affected, but not others.

The PAPR indicates that the correct way to test for EEH is as
done in this patch; its not clear to me if this was in the PAPR
all along, or recently added; if it was there all along, its not
clear to me why this hadn't been fixed long ago. I suspect only
certain firmware levels are affected.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:17 +11:00
Nathan Lynch 59eaef9dae [POWERPC] Maple: don't override bus-range supplied by firmware
This workaround was copy-pasted from the powermac code.  It's not
necessary for maple.

Signed-off-by: Nathan Lynch <ntl@pobox.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:17 +11:00
Vitaly Bordug 29f1530f19 [POWERPC] Add mpc866ads board-specific bits to arch/powerpc
This add support of the Freescale mpc86xads reference board to
arch/powerpc. Supported SMC1 and SMC2 (UART and serial console), FEC
100Mbps Ethernet, SCC1 Ethernet (10Mbps hdx)

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:17 +11:00