In IB networks, and specifically in IPoIB/rdmacm traffic, the device
address of an IPoIB interface is used as a means to exchange information
between nodes needed for communication.
Currently an IPoIB interface will always be created with a device
address based on its node GUID without a way to change that.
This change adds the ability to set the device address of an IPoIB
interface by value. We use the set mac address ndo to do that.
The flow should be broken down to two:
1) The GID value is already in the GID table,
in this case the interface will be able to set carrier up.
2) The GID value is not yet in the GID table,
in this case the interface won't try to join the multicast group
and will wait (listen on GID_CHANGE event) until the GID is inserted.
In order to track those changes, we add a new flag:
* IPOIB_FLAG_DEV_ADDR_SET.
When set, it means the dev_addr is a based on a value in the gid
table. this bit will be cleared upon a dev_addr change triggered
by the user and set after validation.
Per IB spec the port GUID can't change if the module is loaded.
port GUID is the basis for GID at index 0 which is the basis for
the default device address of a ipoib interface.
The issue is that there are devices that don't follow the spec,
they change the port GUID while HCA is powered on, so in order
not to break userspace applications. We need to check if the
user wanted to control the device address and we assume that
if he sets the device address back to be based on GID index 0,
he no longer wishs to control it.
In order to track this, we add an additional flag:
* IPOIB_FLAG_DEV_ADDR_CTRL
When setting the device address, there is no validation of the upper
twelve bytes of the device address (flags, qpn, subnet prefix) as those
bytes are not under the control of the user.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Check (via an SA query) if the SM supports the new option for SendOnly
multicast joins.
If the SM supports that option it will use the new join state to create
such multicast group.
If SendOnlyFullMember is supported, we wouldn't use faked FullMember state
join for SendOnly MCG, use the correct state if supported.
This check is performed at every invocation of mcast_restart task, to be
sure that the driver stays in sync with the current state of the SM.
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
A narrow window for race condition still exist between
multicast join thread and *dev_flush workers.
A kernel crash caused by prolong erratic link state changes
was observed (most likely a faulty cabling):
[167275.656270] BUG: unable to handle kernel NULL pointer dereference at
0000000000000020
[167275.665973] IP: [<ffffffffa05f8f2e>] ipoib_mcast_join+0xae/0x1d0 [ib_ipoib]
[167275.674443] PGD 0
[167275.677373] Oops: 0000 [#1] SMP
...
[167275.977530] Call Trace:
[167275.982225] [<ffffffffa05f92f0>] ? ipoib_mcast_free+0x200/0x200 [ib_ipoib]
[167275.992024] [<ffffffffa05fa1b7>] ipoib_mcast_join_task+0x2a7/0x490
[ib_ipoib]
[167276.002149] [<ffffffff8109d5fb>] process_one_work+0x17b/0x470
[167276.010754] [<ffffffff8109e3cb>] worker_thread+0x11b/0x400
[167276.019088] [<ffffffff8109e2b0>] ? rescuer_thread+0x400/0x400
[167276.027737] [<ffffffff810a5aef>] kthread+0xcf/0xe0
Here was a hit spot:
ipoib_mcast_join() {
..............
rec.qkey = priv->broadcast->mcmember.qkey;
^^^^^^^
.....
}
Proposed patch should prevent multicast join task to continue
if link state change is detected.
Signed-off-by: Alex Estrin <alex.estrin@intel.com>
Changes from v4:
- as suggested by Doug Ledford, optimized spinlock usage,
i.e. ipoib_mcast_join() is called with lock held.
Changes from v3:
- sync with priv->lock before flag check.
Chages from v2:
- Move check for OPER_UP flag state to mcast_join() to
ensure no event worker is in progress.
- minor style fixes.
Changes from v1:
- No need to lock again if error detected.
Signed-off-by: Doug Ledford <dledford@redhat.com>
ipoib_mcast_restart_task calls ipoib_mcast_remove_list with the
parameter mcast->dev. That mcast is a temporary (used as an iterator)
variable that may be uninitialized.
There is no need to send the variable dev to the function, as each mcast
has its dev as a member in the mcast struct.
This causes the next panic:
RIP: 0010: ipoib_mcast_leave+0x6d/0xf0 [ib_ipoib]
RSP: 0018: EFLAGS: 00010246
RAX: f0201 RBX: 24e00 RCX: 00000
....
....
Stack:
Call Trace:
ipoib_mcast_remove_list+0x3a/0x70 [ib_ipoib]
ipoib_mcast_restart_task+0x3bb/0x520 [ib_ipoib]
process_one_work+0x164/0x470
worker_thread+0x11d/0x420
...
Fixes: 5a0e81f6f4 ('IB/IPoIB: factor out common multicast list removal code')
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Reported-by: Doron Tsur <doront@mellanox.com>
Reviewed-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Code cleanup to move multicast specific code that checks for
a sendonly join to ipoib_multicast.c. This allows the removal
of the export of __ipoib_mcast_find().
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Code cleanup to remove multicast specific code from ipoib_main.c
The removal of a list of multicast groups occurs in three places.
Create a new function ipoib_mcast_remove_list(). Use this new
function in ipoib_main.c too.
That in turn allows the dropping of two functions that were
exported from ipoib_multicast.c for expiration of mc groups.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Adding an ability to query the IB cache by a netdev and get the
attributes of a GID. These parameters are necessary in order to
successfully resolve the required GID (when the netdevice is known)
and get the Ethernet L2 attributes from a GID.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-By: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When we leave the multicast group on expiration of a neighbor we
do not free the mcast structure. This results in a memory leak
that causes ib_dealloc_pd to fail and print a WARN_ON message
and backtrace.
Fixes: bd99b2e05c (IB/ipoib: Expire sendonly multicast joins)
Signed-off-by: Christoph Lameter <cl@linux.com>
Tested-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch split up struct ib_send_wr so that all non-trivial verbs
use their own structure which embedds struct ib_send_wr. This dramaticly
shrinks the size of a WR for most common operations:
sizeof(struct ib_send_wr) (old): 96
sizeof(struct ib_send_wr): 48
sizeof(struct ib_rdma_wr): 64
sizeof(struct ib_atomic_wr): 96
sizeof(struct ib_ud_wr): 88
sizeof(struct ib_fast_reg_wr): 88
sizeof(struct ib_bind_mw_wr): 96
sizeof(struct ib_sig_handover_wr): 80
And with Sagi's pending MR rework the fast registration WR will also be
down to a reasonable size:
sizeof(struct ib_fastreg_wr): 64
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> [srp, srpt]
Reviewed-by: Chuck Lever <chuck.lever@oracle.com> [sunrpc]
Tested-by: Haggai Eran <haggaie@mellanox.com>
Tested-by: Sagi Grimberg <sagig@mellanox.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Since IPoIB should, as much as possible, emulate how multicast
sends work on Ethernet for regular TCP/IP apps, there should be
no requirement to subscribe to a multicast group before your
sends are properly sent. However, due to the difference in how
multicast is handled on InfiniBand, we must join the appropriate
multicast group before we can send to it. Previously we tried
not to trigger the auto-create feature of the subnet manager when
doing this because we didn't have tracking of these sendonly
groups and the auto-creation might never get undone. The previous
patch added timing to these sendonly joins and allows us to
leave them after a reasonable idle expiration time. So supply
all of the information needed to auto-create group.
Signed-off-by: Doug Ledford <dledford@redhat.com>
On neighbor expiration, check to see if the neighbor was actually a
sendonly multicast join, and if so, leave the multicast group as we
expire the neighbor.
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
We expect send only joins to fail, it just means there are no listeners
for the group. The correct thing to do is silently drop the packet
at source.
Eg avahi will full join 224.0.0.251 which causes a send only IGMP packet
to 224.0.0.22, and then a warning level kmessage like this:
ib0: sendonly multicast join failed for ff12:401b:ffff:0000:0000:0000:0000:0016, status -22
If there is no IP router listening to IGMP.
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Even though we don't expect the group to be created by the SM we
sill need to provide all the parameters to force the SM to validate
they are correct.
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
After Doug Ledford's changes there is no need in that bit, it's
semantic becomes subset of the IPOIB_FLAG_OPER_UP bit.
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Update the cached broadcast record in the priv object after every new
join of this broadcast domain group.
These values are needed for the port configuration (MTU size) and to
all the new multicast (non-broadcast) join requests initial parameters.
For example, SM starts with 2K MTU for all the fabric, and after that it
restarts (or handover to new SM) with new port configuration of 4K MTU.
Without using the new values, the driver will keep its old configuration
of 2K and will not apply the new configuration of 4K.
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
We needed the mcast_mutex when we had to prevent the join completion
callback from having the value it stored in mcast->mc overwritten
by a delayed return from ib_sa_join_multicast. By storing the return
of ib_sa_join_multicast in an intermediate variable, we prevent a
delayed return from ib_sa_join_multicast overwriting the valid
contents of mcast->mc, and we no longer need a mutex to force the
join callback to run after the return of ib_sa_join_multicast. This
allows us to do away with the mutex entirely and protect our critical
sections with a just a spinlock instead. This is highly desirable
as there were some places where we couldn't use a mutex because the
code was not allowed to sleep, and so we were currently using a mix
of mutex and spinlock to protect what we needed to protect. Now we
only have a spin lock and the locking complexity is greatly reduced.
Signed-off-by: Doug Ledford <dledford@redhat.com>
Allow the ipoib layer to attempt to join all outstanding multicast
groups at once. The ib_sa layer will serialize multiple attempts to
join the same group, but will process attempts to join different groups
in parallel. Take advantage of that.
In order to make this happen, change the mcast_join_thread to loop
through all needed joins, sending a join request for each one that we
still need to join. There are a few special cases we handle though:
1) Don't attempt to join anything but the broadcast group until the join
of the broadcast group has succeeded.
2) No longer restart the join task at the end of completion handling.
If we completed successfully, we are done. The join task now needs kicked
either by mcast_send or mcast_restart_task or mcast_start_thread, but
should not need started anytime else except when scheduling a backoff
attempt to rejoin.
3) No longer use separate join/completion routines for regular and
sendonly joins, pass them all through the same routine and just do the
right thing based on the SENDONLY join flag.
4) Only try to join a SENDONLY join twice, then drop the packets and
quit trying. We leave the mcast group in the list so that if we get a
new packet, all that we have to do is queue up the packet and restart
the join task and it will automatically try to join twice and then
either send or flush the queue again.
Signed-off-by: Doug Ledford <dledford@redhat.com>
Commit a9c8ba5884 ("IPoIB: Fix usage of uninitialized multicast
objects") added a new flag MCAST_JOIN_STARTED, but was not very strict
in how it was used. We didn't always initialize the completion struct
before we set the flag, and we didn't always call complete on the
completion struct from all paths that complete it. And when we did
complete it, sometimes we continued to touch the mcast entry after
the completion, opening us up to possible use after free issues.
This made it less than totally effective, and certainly made its use
confusing. And in the flush function we would use the presence of this
flag to signal that we should wait on the completion struct, but we never
cleared this flag, ever.
In order to make things clearer and aid in resolving the rtnl deadlock
bug I've been chasing, I cleaned this up a bit.
1) Remove the MCAST_JOIN_STARTED flag entirely
2) Change MCAST_FLAG_BUSY so it now only means a join is in-flight
3) Test mcast->mc directly to see if we have completed
ib_sa_join_multicast (using IS_ERR_OR_NULL)
4) Make sure that before setting MCAST_FLAG_BUSY we always initialize
the mcast->done completion struct
5) Make sure that before calling complete(&mcast->done), we always clear
the MCAST_FLAG_BUSY bit
6) Take the mcast_mutex before we call ib_sa_multicast_join and also
take the mutex in our join callback. This forces
ib_sa_multicast_join to return and set mcast->mc before we process
the callback. This way, our callback can safely clear mcast->mc
if there is an error on the join and we will do the right thing as
a result in mcast_dev_flush.
7) Because we need the mutex to synchronize mcast->mc, we can no
longer call mcast_sendonly_join directly from mcast_send and
instead must add sendonly join processing to the mcast_join_task
8) Make MCAST_RUN mean that we have a working mcast subsystem, not that
we have a running task. We know when we need to reschedule our
join task thread and don't need a flag to tell us.
9) Add a helper for rescheduling the join task thread
A number of different races are resolved with these changes. These
races existed with the old MCAST_FLAG_BUSY usage, the
MCAST_JOIN_STARTED flag was an attempt to address them, and while it
helped, a determined effort could still trip things up.
One race looks something like this:
Thread 1 Thread 2
ib_sa_join_multicast (as part of running restart mcast task)
alloc member
call callback
ifconfig ib0 down
wait_for_completion
callback call completes
wait_for_completion in
mcast_dev_flush completes
mcast->mc is PTR_ERR_OR_NULL
so we skip ib_sa_leave_multicast
return from callback
return from ib_sa_join_multicast
set mcast->mc = return from ib_sa_multicast
We now have a permanently unbalanced join/leave issue that trips up the
refcounting in core/multicast.c
Another like this:
Thread 1 Thread 2 Thread 3
ib_sa_multicast_join
ifconfig ib0 down
priv->broadcast = NULL
join_complete
wait_for_completion
mcast->mc is not yet set, so don't clear
return from ib_sa_join_multicast and set mcast->mc
complete
return -EAGAIN (making mcast->mc invalid)
call ib_sa_multicast_leave
on invalid mcast->mc, hang
forever
By holding the mutex around ib_sa_multicast_join and taking the mutex
early in the callback, we force mcast->mc to be valid at the time we
run the callback. This allows us to clear mcast->mc if there is an
error and the join is going to fail. We do this before we complete
the mcast. In this way, mcast_dev_flush always sees consistent state
in regards to mcast->mc membership at the time that the
wait_for_completion() returns.
Signed-off-by: Doug Ledford <dledford@redhat.com>
Various places in the IPoIB code had a deadlock related to flushing
the ipoib workqueue. Now that we have per device workqueues and a
specific flush workqueue, there is no longer a deadlock issue with
flushing the device specific workqueues and we can do so unilaterally.
Signed-off-by: Doug Ledford <dledford@redhat.com>
During my recent work on the rtnl lock deadlock in the IPoIB driver, I
saw that even once I fixed the apparent races for a single device, as
soon as that device had any children, new races popped up. It turns
out that this is because no matter how well we protect against races
on a single device, the fact that all devices use the same workqueue,
and flush_workqueue() flushes *everything* from that workqueue means
that we would also have to prevent all races between different devices
(for instance, ipoib_mcast_restart_task on interface ib0 can race with
ipoib_mcast_flush_dev on interface ib0.8002, resulting in a deadlock on
the rtnl_lock).
There are several possible solutions to this problem:
Make carrier_on_task and mcast_restart_task try to take the rtnl for
some set period of time and if they fail, then bail. This runs the
real risk of dropping work on the floor, which can end up being its
own separate kind of deadlock.
Set some global flag in the driver that says some device is in the
middle of going down, letting all tasks know to bail. Again, this can
drop work on the floor.
Or the method this patch attempts to use, which is when we bring an
interface up, create a workqueue specifically for that interface, so
that when we take it back down, we are flushing only those tasks
associated with our interface. In addition, keep the global
workqueue, but now limit it to only flush tasks. In this way, the
flush tasks can always flush the device specific work queues without
having deadlock issues.
Signed-off-by: Doug Ledford <dledford@redhat.com>
We blindly assume that we can just take the rtnl lock and that will
prevent races with downing this interface. Unfortunately, that's not
the case. In ipoib_mcast_stop_thread() we will call flush_workqueue()
in an attempt to clear out all remaining instances of ipoib_join_task.
But, since this task is put on the same workqueue as the join task,
the flush_workqueue waits on this thread too. But this thread is
deadlocked on the rtnl lock. The better thing here is to use trylock
and loop on that until we either get the lock or we see that
FLAG_OPER_UP has been cleared, in which case we don't need to do
anything anyway and we just return.
While investigating which flag should be used, FLAG_ADMIN_UP or
FLAG_OPER_UP, it was determined that FLAG_OPER_UP was the more
appropriate flag to use. However, there was a mix of these two flags in
use in the existing code. So while we check for that flag here as part
of this race fix, also cleanup the two places that had used the less
appropriate flag for their tests.
Signed-off-by: Doug Ledford <dledford@redhat.com>
The ipoib_mcast_flush_dev routine is called with the rtnl_lock held and
needs to keep it held. It also needs to call flush_workqueue() to flush
out any outstanding work. In the past, we've had to try and make sure
that we didn't flush out any outstanding join completions because they
also wanted to grab rtnl_lock() and that would deadlock. It turns out
that the only thing in the join completion handler that needs this lock
can be safely moved to our carrier_on_task, thereby reducing the
potential for the join completion code and the flush code to deadlock
against each other.
Signed-off-by: Doug Ledford <dledford@redhat.com>
This reverts commit afe1de664e.
The series of IPoIB bug fixes that went into 3.19-rc1 introduce
regressions, and after trying to sort things out, we decided to revert
to 3.18's IPoIB driver and get things right for 3.20.
Signed-off-by: Roland Dreier <roland@purestorage.com>
This reverts commit 67d7209e1f.
The series of IPoIB bug fixes that went into 3.19-rc1 introduce
regressions, and after trying to sort things out, we decided to revert
to 3.18's IPoIB driver and get things right for 3.20.
Signed-off-by: Roland Dreier <roland@purestorage.com>
This reverts commit 016d9fb25c.
The series of IPoIB bug fixes that went into 3.19-rc1 introduce
regressions, and after trying to sort things out, we decided to revert
to 3.18's IPoIB driver and get things right for 3.20.
Signed-off-by: Roland Dreier <roland@purestorage.com>
This reverts commit e5d1dcf1b0.
The series of IPoIB bug fixes that went into 3.19-rc1 introduce
regressions, and after trying to sort things out, we decided to revert
to 3.18's IPoIB driver and get things right for 3.20.
Signed-off-by: Roland Dreier <roland@purestorage.com>
This reverts commit 5141861cd5.
The series of IPoIB bug fixes that went into 3.19-rc1 introduce
regressions, and after trying to sort things out, we decided to revert
to 3.18's IPoIB driver and get things right for 3.20.
Signed-off-by: Roland Dreier <roland@purestorage.com>
This reverts commit bb42a6dd02.
The series of IPoIB bug fixes that went into 3.19-rc1 introduce
regressions, and after trying to sort things out, we decided to revert
to 3.18's IPoIB driver and get things right for 3.20.
Signed-off-by: Roland Dreier <roland@purestorage.com>
We used to pass a flush variable to mcast_stop_thread to indicate if
we should flush the workqueue or not. This was due to some code
trying to flush a workqueue that it was currently running on which is
a no-no. Now that we have per-device work queues, and now that
ipoib_mcast_restart_task has taken the fact that it is queued on a
single thread workqueue with all of the ipoib_mcast_join_task's and
therefore has no need to stop the join task while it runs, we can do
away with the flush parameter and unilaterally flush always.
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
During my recent work on the rtnl lock deadlock in the IPoIB driver, I
saw that even once I fixed the apparent races for a single device, as
soon as that device had any children, new races popped up. It turns
out that this is because no matter how well we protect against races
on a single device, the fact that all devices use the same workqueue,
and flush_workqueue() flushes *everything* from that workqueue, we can
have one device in the middle of a down and holding the rtnl lock and
another totally unrelated device needing to run mcast_restart_task,
which wants the rtnl lock and will loop trying to take it unless is
sees its own FLAG_ADMIN_UP flag go away. Because the unrelated
interface will never see its own ADMIN_UP flag drop, the interface
going down will deadlock trying to flush the queue. There are several
possible solutions to this problem:
Make carrier_on_task and mcast_restart_task try to take the rtnl for
some set period of time and if they fail, then bail. This runs the
real risk of dropping work on the floor, which can end up being its
own separate kind of deadlock.
Set some global flag in the driver that says some device is in the
middle of going down, letting all tasks know to bail. Again, this can
drop work on the floor. I suppose if our own ADMIN_UP flag doesn't go
away, then maybe after a few tries on the rtnl lock we can queue our
own task back up as a delayed work and return and avoid dropping work
on the floor that way. But I'm not 100% convinced that we won't cause
other problems.
Or the method this patch attempts to use, which is when we bring an
interface up, create a workqueue specifically for that interface, so
that when we take it back down, we are flushing only those tasks
associated with our interface. In addition, keep the global
workqueue, but now limit it to only flush tasks. In this way, the
flush tasks can always flush the device specific work queues without
having deadlock issues.
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Our mcast_dev_flush routine and our mcast_restart_task can race
against each other. In particular, they both hold the priv->lock
while manipulating the rbtree and while removing mcast entries from
the multicast_list and while adding entries to the remove_list, but
they also both drop their locks prior to doing the actual removes.
The mcast_dev_flush routine is run entirely under the rtnl lock and so
has at least some locking. The actual race condition is like this:
Thread 1 Thread 2
ifconfig ib0 up
start multicast join for broadcast
multicast join completes for broadcast
start to add more multicast joins
call mcast_restart_task to add new entries
ifconfig ib0 down
mcast_dev_flush
mcast_leave(mcast A)
mcast_leave(mcast A)
As mcast_leave calls ib_sa_multicast_leave, and as member in
core/multicast.c is ref counted, we run into an unbalanced refcount
issue. To avoid stomping on each others removes, take the rtnl lock
specifically when we are deleting the entries from the remove list.
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Commit a9c8ba5884 ("IPoIB: Fix usage of uninitialized multicast
objects") added a new flag MCAST_JOIN_STARTED, but was not very strict
in how it was used. We didn't always initialize the completion struct
before we set the flag, and we didn't always call complete on the
completion struct from all paths that complete it. This made it less
than totally effective, and certainly made its use confusing. And in
the flush function we would use the presence of this flag to signal
that we should wait on the completion struct, but we never cleared
this flag, ever. This is further muddied by the fact that we overload
the MCAST_FLAG_BUSY flag to mean two different things: we have a join
in flight, and we have succeeded in getting an ib_sa_join_multicast.
In order to make things clearer and aid in resolving the rtnl deadlock
bug I've been chasing, I cleaned this up a bit.
1) Remove the MCAST_JOIN_STARTED flag entirely
2) Un-overload MCAST_FLAG_BUSY so it now only means a join is in-flight
3) Test on mcast->mc directly to see if we have completed
ib_sa_join_multicast (using IS_ERR_OR_NULL)
4) Make sure that before setting MCAST_FLAG_BUSY we always initialize
the mcast->done completion struct
5) Make sure that before calling complete(&mcast->done), we always clear
the MCAST_FLAG_BUSY bit
6) Take the mcast_mutex before we call ib_sa_multicast_join and also
take the mutex in our join callback. This forces
ib_sa_multicast_join to return and set mcast->mc before we process
the callback. This way, our callback can safely clear mcast->mc
if there is an error on the join and we will do the right thing as
a result in mcast_dev_flush.
7) Because we need the mutex to synchronize mcast->mc, we can no
longer call mcast_sendonly_join directly from mcast_send and
instead must add sendonly join processing to the mcast_join_task
A number of different races are resolved with these changes. These
races existed with the old MCAST_FLAG_BUSY usage, the
MCAST_JOIN_STARTED flag was an attempt to address them, and while it
helped, a determined effort could still trip things up.
One race looks something like this:
Thread 1 Thread 2
ib_sa_join_multicast (as part of running restart mcast task)
alloc member
call callback
ifconfig ib0 down
wait_for_completion
callback call completes
wait_for_completion in
mcast_dev_flush completes
mcast->mc is PTR_ERR_OR_NULL
so we skip ib_sa_leave_multicast
return from callback
return from ib_sa_join_multicast
set mcast->mc = return from ib_sa_multicast
We now have a permanently unbalanced join/leave issue that trips up the
refcounting in core/multicast.c
Another like this:
Thread 1 Thread 2 Thread 3
ib_sa_multicast_join
ifconfig ib0 down
priv->broadcast = NULL
join_complete
wait_for_completion
mcast->mc is not yet set, so don't clear
return from ib_sa_join_multicast and set mcast->mc
complete
return -EAGAIN (making mcast->mc invalid)
call ib_sa_multicast_leave
on invalid mcast->mc, hang
forever
By holding the mutex around ib_sa_multicast_join and taking the mutex
early in the callback, we force mcast->mc to be valid at the time we
run the callback. This allows us to clear mcast->mc if there is an
error and the join is going to fail. We do this before we complete
the mcast. In this way, mcast_dev_flush always sees consistent state
in regards to mcast->mc membership at the time that the
wait_for_completion() returns.
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
We blindly assume that we can just take the rtnl lock and that will
prevent races with downing this interface. Unfortunately, that's not
the case. In ipoib_mcast_stop_thread() we will call flush_workqueue()
in an attempt to clear out all remaining instances of ipoib_join_task.
But, since this task is put on the same workqueue as the join task,
the flush_workqueue waits on this thread too. But this thread is
deadlocked on the rtnl lock. The better thing here is to use trylock
and loop on that until we either get the lock or we see that
FLAG_ADMIN_UP has been cleared, in which case we don't need to do
anything anyway and we just return.
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Setting the MTU can safely be moved to the carrier_on_task, which keeps
us from needing to take the rtnl lock in the join_finish section.
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
There are two queries for port attributes one after another. A second
call is not needed since port_attr structure already holds the data.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Alex Estrin <alex.estrin@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
The driver starts the mcast_join task whenever the netdev interface is
UP without relation to the underlying IB port state.
Until the port state is ACTIVE all the join requests are irrelevant,
and the IB core returns -EINVAL. So the user will see errors such as:
"multicast join failed for ff12:401b:... , status -22".
Instead, have ipoib_mcast_join_task() return when the port is not active.
It will be called again when the port state is changed and the
low-level driver triggers the IB_EVENT_PORT_ACTIVE event or the
IB_EVENT_CLIENT_REREGISTER event.
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
The driver should avoid calling ib_sa_free_multicast on the mcast->mc
object until it finishes its initialization state. Otherwise we can
crash when ipoib_mcast_dev_flush() attempts to use the uninitialized
multicast object.
Instead, only call wait_for_completion() for multicast entries that
started the join process, meaning that ib_sa_join_multicast() finished.
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Fix a crash in ipoib_mcast_join_task(). (with help from Or Gerlitz)
Commit c8c2afe360 ("IPoIB: Use rtnl lock/unlock when changing device
flags") added a call to rtnl_lock() in ipoib_mcast_join_task(), which
is run from the ipoib_workqueue, and hence the workqueue can't be
flushed from the context of ipoib_stop().
In the current code, ipoib_stop() (which doesn't flush the workqueue)
calls ipoib_mcast_dev_flush(), which goes and deletes all the
multicast entries. This takes place without any synchronization with
a possible running instance of ipoib_mcast_join_task() for the same
ipoib device, leading to a crash due to NULL pointer dereference.
Fix this by making sure that the workqueue is flushed before
ipoib_mcast_dev_flush() is called. To make that possible, we move the
RTNL-lock wrapped code to ipoib_mcast_join_finish().
Signed-off-by: Patrick McHardy <kaber@trash.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Lockdep points out a circular locking dependency betwwen the ipoib
device priv spinlock (priv->lock) and the neighbour table rwlock
(ntbl->rwlock).
In the normal path, ie neigbour garbage collection task, the neigh
table rwlock is taken first and then if the neighbour needs to be
deleted, priv->lock is taken.
However in some error paths, such as in ipoib_cm_handle_tx_wc(),
priv->lock is taken first and then ipoib_neigh_free routine is called
which in turn takes the neighbour table ntbl->rwlock.
The solution is to get rid the neigh table rwlock completely and use
only priv->lock.
Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Dave Miller <davem@davemloft.net> provided a detailed description of
why the way IPoIB is using neighbours for its own ipoib_neigh struct
is buggy:
Any time an ipoib_neigh is changed, a sequence like the following is made:
spin_lock_irqsave(&priv->lock, flags);
/*
* It's safe to call ipoib_put_ah() inside
* priv->lock here, because we know that
* path->ah will always hold one more reference,
* so ipoib_put_ah() will never do more than
* decrement the ref count.
*/
if (neigh->ah)
ipoib_put_ah(neigh->ah);
list_del(&neigh->list);
ipoib_neigh_free(dev, neigh);
spin_unlock_irqrestore(&priv->lock, flags);
ipoib_path_lookup(skb, n, dev);
This doesn't work, because you're leaving a stale pointer to the freed up
ipoib_neigh in the special neigh->ha pointer cookie. Yes, it even fails
with all the locking done to protect _changes_ to *ipoib_neigh(n), and
with the code in ipoib_neigh_free() that NULLs out the pointer.
The core issue is that read side calls to *to_ipoib_neigh(n) are not
being synchronized at all, they are performed without any locking. So
whether we hold the lock or not when making changes to *ipoib_neigh(n)
you still can have threads see references to freed up ipoib_neigh
objects.
cpu 1 cpu 2
n = *ipoib_neigh()
*ipoib_neigh() = NULL
kfree(n)
n->foo == OOPS
[..]
Perhaps the ipoib code can have a private path database it manages
entirely itself, which holds all the necessary information and is
looked up by some generic key which is available easily at transmit
time and does not involve generic neighbour entries.
See <http://marc.info/?l=linux-rdma&m=132812793105624&w=2> and
<http://marc.info/?l=linux-rdma&w=2&r=1&s=allows+references+to+freed+memory&q=b>
for the full discussion.
This patch aims to solve the race conditions found in the IPoIB driver.
The patch removes the connection between the core networking neighbour
structure and the ipoib_neigh structure. In addition to avoiding the
race described above, it allows us to handle SKBs carrying IP packets
that don't have any associated neighbour.
We add an ipoib_neigh hash table with N buckets where the key is the
destination hardware address. The ipoib_neigh is fetched from the
hash table and instead of the stashed location in the neighbour
structure. The hash table uses both RCU and reference counting to
guarantee that no ipoib_neigh instance is ever deleted while in use.
Fetching the ipoib_neigh structure instance from the hash also makes
the special code in ipoib_start_xmit that handles remote and local
bonding failover redundant.
Aged ipoib_neigh instances are deleted by a garbage collection task
that runs every M seconds and deletes every ipoib_neigh instance that
was idle for at least 2*M seconds. The deletion is safe since the
ipoib_neigh instances are protected using RCU and reference count
mechanisms.
The number of buckets (N) and frequency of running the GC thread (M),
are taken from the exported arb_tbl.
Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Commit a0417fa3a1 ("net: Make qdisc_skb_cb upper size bound
explicit.") made it possible for a netdev driver to use skb->cb
between its header_ops.create method and its .ndo_start_xmit
method. Use this in ipoib_hard_header() to stash away the LL address
(GID + QPN), instead of the "ipoib_pseudoheader" hack. This allows
IPoIB to stop lying about its hard_header_len, which will let us fix
the L2 check for GRO.
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To reflect the fact that a refrence is not obtained to the
resulting neighbour entry.
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Roland Dreier <roland@purestorage.com>
Commit f2c31e32b3 ("net: fix NULL dereferences in check_peer_redir()")
forgot to take care of infiniband uses of dst neighbours.
Many thanks to Marc Aurele who provided a nice bug report and feedback.
Reported-by: Marc Aurele La France <tsi@ualberta.ca>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: David Miller <davem@davemloft.net>
Cc: <stable@kernel.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
This following can occur with ipoib when processing a multicast reponse:
BUG: soft lockup - CPU#0 stuck for 67s! [ib_mad1:982]
Modules linked in: ...
CPU 0:
Modules linked in: ...
Pid: 982, comm: ib_mad1 Not tainted 2.6.32-131.0.15.el6.x86_64 #1 ProLiant DL160 G5
RIP: 0010:[<ffffffff814ddb27>] [<ffffffff814ddb27>] _spin_unlock_irqrestore+0x17/0x20
RSP: 0018:ffff8802119ed860 EFLAGS: 00000246
0000000000000004 RBX: ffff8802119ed860 RCX: 000000000000a299
RDX: ffff88021086c700 RSI: 0000000000000246 RDI: 0000000000000246
RBP: ffffffff8100bc8e R08: ffff880210ac229c R09: 0000000000000000
R10: ffff88021278aab8 R11: 0000000000000000 R12: ffff8802119ed860
R13: ffffffff8100be6e R14: 0000000000000001 R15: 0000000000000003
FS: 0000000000000000(0000) GS:ffff880028200000(0000) knlGS:0000000000000000
CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 00000000006d4840 CR3: 0000000209aa5000 CR4: 00000000000406f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Call Trace:
[<ffffffffa032c247>] ? ipoib_mcast_send+0x157/0x480 [ib_ipoib]
[<ffffffff8100bc8e>] ? apic_timer_interrupt+0xe/0x20
[<ffffffff8100bc8e>] ? apic_timer_interrupt+0xe/0x20
[<ffffffffa03283d4>] ? ipoib_path_lookup+0x124/0x2d0 [ib_ipoib]
[<ffffffffa03286fc>] ? ipoib_start_xmit+0x17c/0x430 [ib_ipoib]
[<ffffffff8141e758>] ? dev_hard_start_xmit+0x2c8/0x3f0
[<ffffffff81439d0a>] ? sch_direct_xmit+0x15a/0x1c0
[<ffffffff81423098>] ? dev_queue_xmit+0x388/0x4d0
[<ffffffffa032d6b7>] ? ipoib_mcast_join_finish+0x2c7/0x510 [ib_ipoib]
[<ffffffffa032dab8>] ? ipoib_mcast_sendonly_join_complete+0x1b8/0x1f0 [ib_ipoib]
[<ffffffffa02a0946>] ? mcast_work_handler+0x1a6/0x710 [ib_sa]
[<ffffffffa015f01e>] ? ib_send_mad+0xfe/0x3c0 [ib_mad]
[<ffffffffa00f6c93>] ? ib_get_cached_lmc+0xa3/0xb0 [ib_core]
[<ffffffffa02a0f9b>] ? join_handler+0xeb/0x200 [ib_sa]
[<ffffffffa029e4fc>] ? ib_sa_mcmember_rec_callback+0x5c/0xa0 [ib_sa]
[<ffffffffa029e79c>] ? recv_handler+0x3c/0x70 [ib_sa]
[<ffffffffa01603a4>] ? ib_mad_completion_handler+0x844/0x9d0 [ib_mad]
[<ffffffffa015fb60>] ? ib_mad_completion_handler+0x0/0x9d0 [ib_mad]
[<ffffffff81088830>] ? worker_thread+0x170/0x2a0
[<ffffffff8108e160>] ? autoremove_wake_function+0x0/0x40
[<ffffffff810886c0>] ? worker_thread+0x0/0x2a0
[<ffffffff8108ddf6>] ? kthread+0x96/0xa0
[<ffffffff8100c1ca>] ? child_rip+0xa/0x20
Coinciding with stack trace is the following message:
ib0: ib_address_create failed
The code below in ipoib_mcast_join_finish() will note the above
failure in the address handle but otherwise continue:
ah = ipoib_create_ah(dev, priv->pd, &av);
if (!ah) {
ipoib_warn(priv, "ib_address_create failed\n");
} else {
The while loop at the bottom of ipoib_mcast_join_finish() will attempt
to send queued multicast packets in mcast->pkt_queue and eventually
end up in ipoib_mcast_send():
if (!mcast->ah) {
if (skb_queue_len(&mcast->pkt_queue) < IPOIB_MAX_MCAST_QUEUE)
skb_queue_tail(&mcast->pkt_queue, skb);
else {
++dev->stats.tx_dropped;
dev_kfree_skb_any(skb);
}
My read is that the code will requeue the packet and return to the
ipoib_mcast_join_finish() while loop and the stage is set for the
"hung" task diagnostic as the while loop never sees a non-NULL ah, and
will do nothing to resolve.
There are GFP_ATOMIC allocates in the provider routines, so this is
possible and should be dealt with.
The test that induced the failure is associated with a host SM on the
same server during a shutdown.
This patch causes ipoib_mcast_join_finish() to exit with an error
which will flush the queued mcast packets. Nothing is done to unwind
the QP attached state so that subsequent sends from above will retry
the join.
Reviewed-by: Ram Vepa <ram.vepa@qlogic.com>
Reviewed-by: Gary Leshner <gary.leshner@qlogic.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
These files were getting the moduleparam infrastructure from the
implicit presence of module.h being everywhere, but that is going
away soon.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Mark Bloch