There are a few different subsystems in the kernel that depend on model
specific behaviour (perf, EDAC, power, ...). Easier for just one person
to have the task to get new model numbers included instead of having
these groups trip over each other to do it.
[ bp: s/Cpu/CPU/ and add x86@kernel.org so that it gets CCed too as
FYI. ]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20190814234030.30817-1-tony.luck@intel.com
drm-fixes-5.3-2019-08-14:
amdgpu:
- Use kvalloc for dc_state to avoid allocation
failures in some cases.
- Fix gfx9 soft recovery
scheduler:
- Fix a race condition when destroying entities
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190815024919.3434-1-alexander.deucher@amd.com
I -thought- I had fixed this entirely, but it looks like that I didn't
test this thoroughly enough as we apparently still make one big mistake
with nv50_msto_atomic_check() - we don't handle the following scenario:
* CRTC #1 has n VCPI allocated to it, is attached to connector DP-4
which is attached to encoder #1. enabled=y active=n
* CRTC #1 is changed from DP-4 to DP-5, causing:
* DP-4 crtc=#1→NULL (VCPI n→0)
* DP-5 crtc=NULL→#1
* CRTC #1 steals encoder #1 back from DP-4 and gives it to DP-5
* CRTC #1 maintains the same mode as before, just with a different
connector
* mode_changed=n connectors_changed=y
(we _SHOULD_ do VCPI 0→n here, but don't)
Once the above scenario is repeated once, we'll attempt freeing VCPI
from the connector that we didn't allocate due to the connectors
changing, but the mode staying the same. Sigh.
Since nv50_msto_atomic_check() has broken a few times now, let's rethink
things a bit to be more careful: limit both VCPI/PBN allocations to
mode_changed || connectors_changed, since neither VCPI or PBN should
ever need to change outside of routing and mode changes.
Changes since v1:
* Fix accidental reversal of clock and bpp arguments in
drm_dp_calc_pbn_mode() - William Lewis
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reported-by: Bohdan Milar <bmilar@redhat.com>
Tested-by: Bohdan Milar <bmilar@redhat.com>
Fixes: 232c9eec41 ("drm/nouveau: Use atomic VCPI helpers for MST")
References: 412e85b605 ("drm/nouveau: Only release VCPI slots on mode changes")
Cc: Lyude Paul <lyude@redhat.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Juston Li <juston.li@intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Karol Herbst <karolherbst@gmail.com>
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: <stable@vger.kernel.org> # v5.1+
Acked-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190809005307.18391-1-lyude@redhat.com
Diverged from what the code does with commit 530210c781 ("of/irq: Replace
of_irq with of_phandle_args").
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Rob Herring <robh@kernel.org>
The proper way to add additional contraints to an existing json-schema
is using 'allOf' to reference the base schema. Using just '$ref' doesn't
work. Fix this for the 'st,syscfg' property.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: linux-gpio@vger.kernel.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-arm-kernel@lists.infradead.org
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Hi Linus,
Please, pull the following patches that fix sh mainline builds:
- Fix fall-through warning in sh.
- Fix missing break bug in sh (this is a 10-year-old bug).
Currently, mainline builds for sh are broken. These patches fix that.
Thanks
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
-----BEGIN PGP SIGNATURE-----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=hnDA
-----END PGP SIGNATURE-----
Merge tag 'Wimplicit-fallthrough-5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull fallthrough fixes from Gustavo A. R. Silva:
"Fix sh mainline builds:
- Fix fall-through warning in sh.
- Fix missing break bug in sh (this is a 10-year-old bug)
Currently, mainline builds for sh are broken. These patches fix that"
* tag 'Wimplicit-fallthrough-5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
sh: kernel: hw_breakpoint: Fix missing break in switch statement
sh: kernel: disassemble: Mark expected switch fall-throughs
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
-----BEGIN PGP SIGNATURE-----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=zivP
-----END PGP SIGNATURE-----
Merge tag 'afs-fixes-20190814' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull afs fixes from David Howells:
- Fix the CB.ProbeUuid handler to generate its reply correctly.
- Fix a mix up in indices when parsing a Volume Location entry record.
- Fix a potential NULL-pointer deref when cleaning up a read request.
- Fix the expected data version of the destination directory in
afs_rename().
- Fix afs_d_revalidate() to only update d_fsdata if it's not the same
as the directory data version to reduce the likelihood of overwriting
the result of a competing operation. (d_fsdata carries the directory
DV or the least-significant word thereof).
- Fix the tracking of the data-version on a directory and make sure
that dentry objects get properly initialised, updated and
revalidated.
Also fix rename to update d_fsdata to match the new directory's DV if
the dentry gets moved over and unhash the dentry to stop
afs_d_revalidate() from interfering.
* tag 'afs-fixes-20190814' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
afs: Fix missing dentry data version updating
afs: Only update d_fsdata if different in afs_d_revalidate()
afs: Fix off-by-one in afs_rename() expected data version calculation
fs: afs: Fix a possible null-pointer dereference in afs_put_read()
afs: Fix loop index mixup in afs_deliver_vl_get_entry_by_name_u()
afs: Fix the CB.ProbeUuid service handler to reply correctly
The spsc_queue_peek function is accessing queue->head which belongs to
the consumer thread and shouldn't be accessed by the producer
This is fixing a rare race condition when destroying entities.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Monk.liu@amd.com
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make the __fstate_clean() function correctly set the
state of sstatus.FS in pt_regs to SR_FS_CLEAN.
Fixes: 7db91e57a0 ("RISC-V: Task implementation")
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
[paul.walmsley@sifive.com: expanded "Fixes" commit ID]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
The following two reasons cause FP registers are sometimes not
initialized before starting the user program.
1. Currently, the FP context is initialized in flush_thread() function
and we expect these initial values to be restored to FP register when
doing FP context switch. However, the FP context switch only occurs in
switch_to function. Hence, if this process does not be scheduled out
and scheduled in before entering the user space, the FP registers
have no chance to initialize.
2. In flush_thread(), the state of reg->sstatus.FS inherits from the
parent. Hence, the state of reg->sstatus.FS may be dirty. If this
process is scheduled out during flush_thread() and initializing the
FP register, the fstate_save() in switch_to will corrupt the FP context
which has been initialized until flush_thread().
To solve the 1st case, the initialization of the FP register will be
completed in start_thread(). It makes sure all FP registers are initialized
before starting the user program. For the 2nd case, the state of
reg->sstatus.FS in start_thread will be set to SR_FS_OFF to prevent this
process from corrupting FP context in doing context save. The FP state is
set to SR_FS_INITIAL in start_trhead().
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Fixes: 7db91e57a0 ("RISC-V: Task implementation")
Cc: stable@vger.kernel.org
[paul.walmsley@sifive.com: fixed brace alignment issue reported by
checkpatch]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
- Fix a memory registration release flow issue that was causing a
WARN_ON (mlx5)
- If the counters for a port aren't allocated, then we can't do
operations on the non-existent counters (core)
- Check the right variable for error code result (mlx5)
- Fix a use after free issue (mlx5)
- Fix an off by one memory leak (siw)
- Actually return an error code on error (core)
- Allow siw to be built on 32bit arches (siw, ABI change, but OK since
siw was just merged this merge window and there is no prior released
kernel to maintain compatibility with and we also updated the
rdma-core user space package to match)
Signed-off-by: Doug Ledford <dledford@redhat.com>
-----BEGIN PGP SIGNATURE-----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=misR
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Doug Ledford:
"Fairly small pull request for -rc3. I'm out of town the rest of this
week, so I made sure to clean out as much as possible from patchworks
in enough time for 0-day to chew through it (Yay! for 0-day being back
online! :-)). Jason might send through any emergency stuff that could
pop up, otherwise I'm back next week.
The only real thing of note is the siw ABI change. Since we just
merged siw *this* release, there are no prior kernel releases to
maintain kernel ABI with. I told Bernard that if there is anything
else about the siw ABI he thinks he might want to change before it
goes set in stone, he should get it in ASAP. The siw module was around
for several years outside the kernel tree, and it had to be revamped
considerably for inclusion upstream, so we are making no attempts to
be backward compatible with the out of tree version. Once 5.3 is
actually released, we will have our baseline ABI to maintain.
Summary:
- Fix a memory registration release flow issue that was causing a
WARN_ON (mlx5)
- If the counters for a port aren't allocated, then we can't do
operations on the non-existent counters (core)
- Check the right variable for error code result (mlx5)
- Fix a use after free issue (mlx5)
- Fix an off by one memory leak (siw)
- Actually return an error code on error (core)
- Allow siw to be built on 32bit arches (siw, ABI change, but OK
since siw was just merged this merge window and there is no prior
released kernel to maintain compatibility with and we also updated
the rdma-core user space package to match)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/siw: Change CQ flags from 64->32 bits
RDMA/core: Fix error code in stat_get_doit_qp()
RDMA/siw: Fix a memory leak in siw_init_cpulist()
IB/mlx5: Fix use-after-free error while accessing ev_file pointer
IB/mlx5: Check the correct variable in error handling code
RDMA/counter: Prevent QP counter binding if counters unsupported
IB/mlx5: Fix implicit MR release flow
The `uac_mixer_unit_descriptor` shown as below is read from the
device side. In `parse_audio_mixer_unit`, `baSourceID` field is
accessed from index 0 to `bNrInPins` - 1, the current implementation
assumes that descriptor is always valid (the length of descriptor
is no shorter than 5 + `bNrInPins`). If a descriptor read from
the device side is invalid, it may trigger out-of-bound memory
access.
```
struct uac_mixer_unit_descriptor {
__u8 bLength;
__u8 bDescriptorType;
__u8 bDescriptorSubtype;
__u8 bUnitID;
__u8 bNrInPins;
__u8 baSourceID[];
}
```
This patch fixes the bug by add a sanity check on the length of
the descriptor.
Reported-by: Hui Peng <benquike@gmail.com>
Reported-by: Mathias Payer <mathias.payer@nebelwelt.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Peng <benquike@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
- fix the handling of the bus_dma_mask in dma_get_required_mask, which
caused a regression in this merge window (Lucas Stach)
- fix a regression in the handling of DMA_ATTR_NO_KERNEL_MAPPING (me)
- fix dma_mmap_coherent to not cause page attribute mismatches on
coherent architectures like x86 (me)
-----BEGIN PGP SIGNATURE-----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=Jzmo
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.3-4' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
- fix the handling of the bus_dma_mask in dma_get_required_mask, which
caused a regression in this merge window (Lucas Stach)
- fix a regression in the handling of DMA_ATTR_NO_KERNEL_MAPPING (me)
- fix dma_mmap_coherent to not cause page attribute mismatches on
coherent architectures like x86 (me)
* tag 'dma-mapping-5.3-4' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: fix page attributes for dma_mmap_*
dma-direct: don't truncate dma_required_mask to bus addressing capabilities
dma-direct: fix DMA_ATTR_NO_KERNEL_MAPPING
Including:
- A couple more fixes for the Intel VT-d driver for bugs
introduced during the recent conversion of this driver to use
IOMMU core default domains.
- Fix for common dma-iommu code to make sure MSI mappings happen
in the correct domain for a device.
- Fix a corner case in the handling of sg-lists in dma-iommu
code that might cause dma_length to be truncated.
- Mark a switch as fall-through in arm-smmu code.
-----BEGIN PGP SIGNATURE-----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=+b4H
-----END PGP SIGNATURE-----
Merge tag 'iommu-fixes-v5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- A couple more fixes for the Intel VT-d driver for bugs introduced
during the recent conversion of this driver to use IOMMU core default
domains.
- Fix for common dma-iommu code to make sure MSI mappings happen in the
correct domain for a device.
- Fix a corner case in the handling of sg-lists in dma-iommu code that
might cause dma_length to be truncated.
- Mark a switch as fall-through in arm-smmu code.
* tag 'iommu-fixes-v5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/vt-d: Fix possible use-after-free of private domain
iommu/vt-d: Detach domain before using a private one
iommu/dma: Handle SG length overflow better
iommu/vt-d: Correctly check format of page table in debugfs
iommu/vt-d: Detach domain when move device out of group
iommu/arm-smmu: Mark expected switch fall-through
iommu/dma: Handle MSI mappings separately
Merge misc VM fixes from Andrew Morton:
"A bunch of hotfixes, all affecting mm/.
The two-patch series from Andrea may be controversial. This restores
patches which were reverted in Dec 2018 due to a regression report [*].
After extensive discussion it is evident that the problems which these
patches solved were significantly more serious than the problems they
introduced. I am told that major distros are already carrying these
two patches for this reason"
[*] See
https://lore.kernel.org/lkml/alpine.DEB.2.21.1812061343240.144733@chino.kir.corp.google.com/https://lore.kernel.org/lkml/alpine.DEB.2.21.1812031545560.161134@chino.kir.corp.google.com/
for the google-specific issues brought up by David Rijentes. And as
Andrew says:
"I'm unaware of anyone else who will be adversely affected by this,
and google already carries over a thousand kernel patches - another
won't kill them.
There has been sporadic discussion about fixing these things for
real but it's clear that nobody apart from David is particularly
motivated"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
hugetlbfs: fix hugetlb page migration/fault race causing SIGBUS
mm, vmscan: do not special-case slab reclaim when watermarks are boosted
Revert "mm, thp: restore node-local hugepage allocations"
Revert "Revert "mm, thp: consolidate THP gfp handling into alloc_hugepage_direct_gfpmask""
include/asm-generic/5level-fixup.h: fix variable 'p4d' set but not used
seq_file: fix problem when seeking mid-record
mm: workingset: fix vmstat counters for shadow nodes
mm/usercopy: use memory range to be accessed for wraparound check
mm: kmemleak: disable early logging in case of error
mm/vmalloc.c: fix percpu free VM area search criteria
mm/memcontrol.c: fix use after free in mem_cgroup_iter()
mm/z3fold.c: fix z3fold_destroy_pool() race condition
mm/z3fold.c: fix z3fold_destroy_pool() ordering
mm: mempolicy: handle vma with unmovable pages mapped correctly in mbind
mm: mempolicy: make the behavior consistent when MPOL_MF_MOVE* and MPOL_MF_STRICT were specified
mm/hmm: fix bad subpage pointer in try_to_unmap_one
mm/hmm: fix ZONE_DEVICE anon page mapping reuse
mm: document zone device struct page field usage
We need to do it only when fallbacking from GTK to the TUI.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-dda0acxqef1k72n9z4myjbjt@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Same as in the commit 0176622953 ("perf record: Support s390 random
socket_id assignment"), aarch64 also have this problem.
Without this fix:
[root@localhost perf]# ./perf report --header -I -v
...
socket_id number is too big.You may need to upgrade the perf tool.
# ========
# captured on : Thu Aug 1 22:58:38 2019
# header version : 1
...
# Core ID and Socket ID information is not available
...
With this fix:
[root@localhost perf]# ./perf report --header -I -v
...
cpumask list: 0-31
cpumask list: 32-63
cpumask list: 64-95
cpumask list: 96-127
# ========
# captured on : Thu Aug 1 22:58:38 2019
# header version : 1
...
# CPU 0: Core ID 0, Socket ID 36
# CPU 1: Core ID 1, Socket ID 36
...
# CPU 126: Core ID 126, Socket ID 8442
# CPU 127: Core ID 127, Socket ID 8442
...
Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Link: http://lkml.kernel.org/r/1564717737-21602-1-git-send-email-tanxiaojun@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf.data file format documentation for HEADER_SAMPLE_TOPOLOGY
specifies the layout in a confusing manner that doesn't match the rest
of the document. This patch attempts to describe things consistent with
the rest of the file.
Signed-off-by: Vince Weaver <vincent.weaver@maine.edu>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Chong Jiang <chongjiang@chromium.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Link: http://lkml.kernel.org/r/alpine.DEB.2.21.1908011425240.14303@macbook-air
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When `make help` is executed it lists the possible tools to build,
though couple of entries is kept unordered. Fix it here.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Link: https://lkml.kernel.org/n/tip-0ke3p64ksa0hnbueh52n3v3q@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Just like we do with the 'write_backwards' feature:
Before:
# perf record -e {intel_pt/branch=0/,cycles/aux-output/ppp} uname
Error:
The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (cycles/aux-output/ppp).
/bin/dmesg | grep -i perf may provide additional information.
#
After:
# perf record -e {intel_pt/branch=0/,cycles/aux-output/ppp} uname
Error:
The 'aux_output' feature is not supported, update the kernel.
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/n/tip-wgjsjroe1e150c0metgwmqwd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Document how to select PEBS via Intel PT and how to display synthesized
PEBS samples.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190806084606.4021-8-alexander.shishkin@linux.intel.com
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
[ Update the example to use a group with intel_pt// as the group leader, as per Alex comment ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Expose the aux_output attribute flag to the user to configure, by adding a
config term 'aux-output'. For events that support it, selection of
'aux-output' causes the generation of AUX records instead of event records.
This requires that an AUX area event is also provided.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190806084606.4021-7-alexander.shishkin@linux.intel.com
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Process synth_opts.other_events and attr.aux_output to set up for
synthesizing PEBs via Intel PT events.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190806084606.4021-6-alexander.shishkin@linux.intel.com
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
[ Fixed up libbperf clashes, i.e. some places using perf_evsel (now in libperf)
need to use instead 'evsel' (a tools/perf only abstraction) ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add itrace option 'o' to synthesize events recorded in the AUX area due
to the use of perf record's aux-output config term.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190806084606.4021-5-alexander.shishkin@linux.intel.com
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add aux_output attribute flag to match the kernel's perf_event.h file.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190806084606.4021-4-alexander.shishkin@linux.intel.com
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is sometimes useful to generate a snapshot when perf record exits;
I've been using a wrapper script around the workload that would do a
killall -USR2 perf when the workload exits.
This patch makes it easier and also works when perf record is attached
to a pre-existing task. A new snapshot option 'e' can be specified in
-S to enable this behavior:
root@elsewhere:~# perf record -e intel_pt// -Se sleep 1
[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.085 MB perf.data ]
Co-developed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190806144101.62892-1-alexander.shishkin@linux.intel.com
[ Fixed up !HAVE_AUXTRACE_SUPPORT build in builtin-record.c, adding 2 missing __maybe_unused ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If we link against libcap, then we can state that CAP_SYS_ADMIN is
needed, if not, fallback to telling the user it needs to be root, as was
before linking against libcap.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Igor Lubashev <ilubashe@akamai.com>
Cc: James Morris <jmorris@namei.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Link: https://lkml.kernel.org/n/tip-hhnbjdo8r67054of9zm2kxtl@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The kernel requires CAP_SYS_ADMIN instead of euid==0 to mount debugfs
for ftrace. Make perf do the same.
Signed-off-by: Igor Lubashev <ilubashe@akamai.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: James Morris <jmorris@namei.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/bd8763b72ed4d58d0b42d44fbc7eb474d32e53a3.1565188228.git.ilubashe@akamai.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some of the systems I test don't have that define, provide it
conditionally since we'll use it in the kptr_restrict checks in the next
patch.
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Igor Lubashev <ilubashe@akamai.com>
Cc: James Morris <jmorris@namei.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Link: https://lkml.kernel.org/n/tip-dcize2v6jjab7tds5ngz97dk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need to add these so that we test building without all selectable
features.
Acked-by: Igor Lubashev <ilubashe@akamai.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: James Morris <jmorris@namei.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Link: https://lkml.kernel.org/n/tip-eknnvp22elznj0cl5a39hc4v@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add utilities to help checking capabilities of the running procss. Make
perf link with libcap, if it is available. If no libcap-dev[el],
fallback to the geteuid() == 0 test used before.
Committer notes:
$ perf test python
18: 'import perf' in python : FAILED!
$ perf test -v python
Couldn't bump rlimit(MEMLOCK), failures may take place when creating BPF maps, etc
18: 'import perf' in python :
--- start ---
test child forked, pid 23288
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
ImportError: /tmp/build/perf/python/perf.so: undefined symbol: cap_get_flag
test child finished with -1
---- end ----
'import perf' in python: FAILED!
$
This happens because differently from the perf binary generated with
this patch applied:
$ ldd /tmp/build/perf/perf | grep libcap
libcap.so.2 => /lib64/libcap.so.2 (0x00007f724a4ef000)
$
The python binding isn't linking with libcap:
$ ldd /tmp/build/perf/python/perf.so | grep libcap
$
So add 'cap' to the 'extra_libraries' variable in
tools/perf/util/setup.py, and rebuild:
$ perf test python
18: 'import perf' in python : Ok
$
If we explicitely disable libcap it also continues to work:
$ make NO_LIBCAP=1 -C tools/perf O=/tmp/build/perf install-bin
$ ldd /tmp/build/perf/perf | grep libcap
$ ldd /tmp/build/perf/python/perf.so | grep libcap
$ perf test python
18: 'import perf' in python : Ok
$
Signed-off-by: Igor Lubashev <ilubashe@akamai.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: James Morris <jmorris@namei.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
[ split from a larger patch ]
Link: http://lkml.kernel.org/r/8a1e76cf5c7c9796d0d4d240fbaa85305298aafa.1565188228.git.ilubashe@akamai.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch corrects the SPDX License Identifier style
in header file related to STM32 Driver for I2C hardware
bus support.
For C header files Documentation/process/license-rules.rst
mandates C-like comments (opposed to C source files where
C++ style should be used)
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
After we disabled interrupts, there might still be an active one
running. Sync before clearing the pointer to the slave device.
Fixes: c31d0a0002 ("i2c: emev2: add slave support")
Reported-by: Krzysztof Adamski <krzysztof.adamski@nokia.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Krzysztof Adamski <krzysztof.adamski@nokia.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
After we disabled interrupts, there might still be an active one
running. Sync before clearing the pointer to the slave device.
Fixes: de20d1857d ("i2c: rcar: add slave support")
Reported-by: Krzysztof Adamski <krzysztof.adamski@nokia.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Krzysztof Adamski <krzysztof.adamski@nokia.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
I would like to maintain the i2c-imx driver. Since I work with
different i.MX variants and have access to the hardware, I can spend
some time on the reviewing of this driver.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Since commit e1ab9a468e ("i2c: imx: improve the error handling in
i2c_imx_dma_request()") when booting with the DMA driver as module (such
as CONFIG_FSL_EDMA=m) the following endless clk warnings are seen:
[ 153.077831] ------------[ cut here ]------------
[ 153.082528] WARNING: CPU: 0 PID: 15 at drivers/clk/clk.c:924 clk_core_disable_lock+0x18/0x24
[ 153.093077] i2c0 already disabled
[ 153.096416] Modules linked in:
[ 153.099521] CPU: 0 PID: 15 Comm: kworker/0:1 Tainted: G W 5.2.0+ #321
[ 153.107290] Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree)
[ 153.113772] Workqueue: events deferred_probe_work_func
[ 153.118979] [<c0019560>] (unwind_backtrace) from [<c0014734>] (show_stack+0x10/0x14)
[ 153.126778] [<c0014734>] (show_stack) from [<c083f8dc>] (dump_stack+0x9c/0xd4)
[ 153.134051] [<c083f8dc>] (dump_stack) from [<c0031154>] (__warn+0xf8/0x124)
[ 153.141056] [<c0031154>] (__warn) from [<c0031248>] (warn_slowpath_fmt+0x38/0x48)
[ 153.148580] [<c0031248>] (warn_slowpath_fmt) from [<c040fde0>] (clk_core_disable_lock+0x18/0x24)
[ 153.157413] [<c040fde0>] (clk_core_disable_lock) from [<c058f520>] (i2c_imx_probe+0x554/0x6ec)
[ 153.166076] [<c058f520>] (i2c_imx_probe) from [<c04b9178>] (platform_drv_probe+0x48/0x98)
[ 153.174297] [<c04b9178>] (platform_drv_probe) from [<c04b7298>] (really_probe+0x1d8/0x2c0)
[ 153.182605] [<c04b7298>] (really_probe) from [<c04b7554>] (driver_probe_device+0x5c/0x174)
[ 153.190909] [<c04b7554>] (driver_probe_device) from [<c04b58c8>] (bus_for_each_drv+0x44/0x8c)
[ 153.199480] [<c04b58c8>] (bus_for_each_drv) from [<c04b746c>] (__device_attach+0xa0/0x108)
[ 153.207782] [<c04b746c>] (__device_attach) from [<c04b65a4>] (bus_probe_device+0x88/0x90)
[ 153.215999] [<c04b65a4>] (bus_probe_device) from [<c04b6a04>] (deferred_probe_work_func+0x60/0x90)
[ 153.225003] [<c04b6a04>] (deferred_probe_work_func) from [<c004f190>] (process_one_work+0x204/0x634)
[ 153.234178] [<c004f190>] (process_one_work) from [<c004f618>] (worker_thread+0x20/0x484)
[ 153.242315] [<c004f618>] (worker_thread) from [<c0055c2c>] (kthread+0x118/0x150)
[ 153.249758] [<c0055c2c>] (kthread) from [<c00090b4>] (ret_from_fork+0x14/0x20)
[ 153.257006] Exception stack(0xdde43fb0 to 0xdde43ff8)
[ 153.262095] 3fa0: 00000000 00000000 00000000 00000000
[ 153.270306] 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 153.278520] 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000
[ 153.285159] irq event stamp: 3323022
[ 153.288787] hardirqs last enabled at (3323021): [<c0861c4c>] _raw_spin_unlock_irq+0x24/0x2c
[ 153.297261] hardirqs last disabled at (3323022): [<c040d7a0>] clk_enable_lock+0x10/0x124
[ 153.305392] softirqs last enabled at (3322092): [<c000a504>] __do_softirq+0x344/0x540
[ 153.313352] softirqs last disabled at (3322081): [<c00385c0>] irq_exit+0x10c/0x128
[ 153.320946] ---[ end trace a506731ccd9bd703 ]---
This endless clk warnings behaviour is well explained by Andrey Smirnov:
"Allocating DMA after registering I2C adapter can lead to infinite
probing loop, for example, consider the following scenario:
1. i2c_imx_probe() is called and successfully registers an I2C
adapter via i2c_add_numbered_adapter()
2. As a part of i2c_add_numbered_adapter() new I2C slave devices
are added from DT which results in a call to
driver_deferred_probe_trigger()
3. i2c_imx_probe() continues and calls i2c_imx_dma_request() which
due to lack of proper DMA driver returns -EPROBE_DEFER
4. i2c_imx_probe() fails, removes I2C adapter and returns
-EPROBE_DEFER, which places it into deferred probe list
5. Deferred probe work triggered in #2 above kicks in and calls
i2c_imx_probe() again thus bringing us to step #1"
So revert commit e1ab9a468e ("i2c: imx: improve the error handling in
i2c_imx_dma_request()") and restore the old behaviour, in order to
avoid regressions on existing setups.
Cc: <stable@vger.kernel.org>
Reported-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reported-by: Russell King <linux@armlinux.org.uk>
Fixes: e1ab9a468e ("i2c: imx: improve the error handling in i2c_imx_dma_request()")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Make codec enter D3 before rebooting or poweroff can fix the noise
issue on some laptops. And in theory it is harmless for all codecs
to enter D3 before rebooting or poweroff, let us add a generic
reboot_notify, then realtek and conexant drivers can call this
function.
Cc: stable@vger.kernel.org
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We have 3 new lenovo laptops which have conexant codec 0x14f11f86,
these 3 laptops also have the noise issue when rebooting, after
letting the codec enter D3 before rebooting or poweroff, the noise
disappers.
Instead of adding a new ID again in the reboot_notify(), let us make
this function apply to all conexant codec. In theory make codec enter
D3 before rebooting or poweroff is harmless, and I tested this change
on a couple of other Lenovo laptops which have different conexant
codecs, there is no side effect so far.
Cc: stable@vger.kernel.org
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Update the defconfig:
- Add CONFIG_HW_RANDOM=y and CONFIG_HW_RANDOM_VIRTIO=y to enable
VirtIORNG when running on QEMU
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Update the rv32_defconfig:
- Add 'CONFIG_DEVTMPFS_MOUNT=y' to match the RISC-V defconfig
- Add CONFIG_HW_RANDOM=y and CONFIG_HW_RANDOM_VIRTIO=y to enable
VirtIORNG when running on QEMU
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Li Wang discovered that LTP/move_page12 V2 sometimes triggers SIGBUS in
the kernel-v5.2.3 testing. This is caused by a race between hugetlb
page migration and page fault.
If a hugetlb page can not be allocated to satisfy a page fault, the task
is sent SIGBUS. This is normal hugetlbfs behavior. A hugetlb fault
mutex exists to prevent two tasks from trying to instantiate the same
page. This protects against the situation where there is only one
hugetlb page, and both tasks would try to allocate. Without the mutex,
one would fail and SIGBUS even though the other fault would be
successful.
There is a similar race between hugetlb page migration and fault.
Migration code will allocate a page for the target of the migration. It
will then unmap the original page from all page tables. It does this
unmap by first clearing the pte and then writing a migration entry. The
page table lock is held for the duration of this clear and write
operation. However, the beginnings of the hugetlb page fault code
optimistically checks the pte without taking the page table lock. If
clear (as it can be during the migration unmap operation), a hugetlb
page allocation is attempted to satisfy the fault. Note that the page
which will eventually satisfy this fault was already allocated by the
migration code. However, the allocation within the fault path could
fail which would result in the task incorrectly being sent SIGBUS.
Ideally, we could take the hugetlb fault mutex in the migration code
when modifying the page tables. However, locks must be taken in the
order of hugetlb fault mutex, page lock, page table lock. This would
require significant rework of the migration code. Instead, the issue is
addressed in the hugetlb fault code. After failing to allocate a huge
page, take the page table lock and check for huge_pte_none before
returning an error. This is the same check that must be made further in
the code even if page allocation is successful.
Link: http://lkml.kernel.org/r/20190808000533.7701-1-mike.kravetz@oracle.com
Fixes: 290408d4a2 ("hugetlb: hugepage migration core")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: Li Wang <liwang@redhat.com>
Tested-by: Li Wang <liwang@redhat.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Cyril Hrubis <chrubis@suse.cz>
Cc: Xishi Qiu <xishi.qiuxishi@alibaba-inc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dave Chinner reported a problem pointing a finger at commit 1c30844d2d
("mm: reclaim small amounts of memory when an external fragmentation
event occurs").
The report is extensive:
https://lore.kernel.org/linux-mm/20190807091858.2857-1-david@fromorbit.com/
and it's worth recording the most relevant parts (colorful language and
typos included).
When running a simple, steady state 4kB file creation test to
simulate extracting tarballs larger than memory full of small
files into the filesystem, I noticed that once memory fills up
the cache balance goes to hell.
The workload is creating one dirty cached inode for every dirty
page, both of which should require a single IO each to clean and
reclaim, and creation of inodes is throttled by the rate at which
dirty writeback runs at (via balance dirty pages). Hence the ingest
rate of new cached inodes and page cache pages is identical and
steady. As a result, memory reclaim should quickly find a steady
balance between page cache and inode caches.
The moment memory fills, the page cache is reclaimed at a much
faster rate than the inode cache, and evidence suggests that
the inode cache shrinker is not being called when large batches
of pages are being reclaimed. In roughly the same time period
that it takes to fill memory with 50% pages and 50% slab caches,
memory reclaim reduces the page cache down to just dirty pages
and slab caches fill the entirety of memory.
The LRU is largely full of dirty pages, and we're getting spikes
of random writeback from memory reclaim so it's all going to shit.
Behaviour never recovers, the page cache remains pinned at just
dirty pages, and nothing I could tune would make any difference.
vfs_cache_pressure makes no difference - I would set it so high
it should trim the entire inode caches in a single pass, yet it
didn't do anything. It was clear from tracing and live telemetry
that the shrinkers were pretty much not running except when
there was absolutely no memory free at all, and then they did
the minimum necessary to free memory to make progress.
So I went looking at the code, trying to find places where pages
got reclaimed and the shrinkers weren't called. There's only one
- kswapd doing boosted reclaim as per commit 1c30844d2d ("mm:
reclaim small amounts of memory when an external fragmentation
event occurs").
The watermark boosting introduced by the commit is triggered in response
to an allocation "fragmentation event". The boosting was not intended
to target THP specifically and triggers even if THP is disabled.
However, with Dave's perfectly reasonable workload, fragmentation events
can be very common given the ratio of slab to page cache allocations so
boosting remains active for long periods of time.
As high-order allocations might use compaction and compaction cannot
move slab pages the decision was made in the commit to special-case
kswapd when watermarks are boosted -- kswapd avoids reclaiming slab as
reclaiming slab does not directly help compaction.
As Dave notes, this decision means that slab can be artificially
protected for long periods of time and messes up the balance with slab
and page caches.
Removing the special casing can still indirectly help avoid
fragmentation by avoiding fragmentation-causing events due to slab
allocation as pages from a slab pageblock will have some slab objects
freed. Furthermore, with the special casing, reclaim behaviour is
unpredictable as kswapd sometimes examines slab and sometimes does not
in a manner that is tricky to tune or analyse.
This patch removes the special casing. The downside is that this is not
a universal performance win. Some benchmarks that depend on the
residency of data when rereading metadata may see a regression when slab
reclaim is restored to its original behaviour. Similarly, some
benchmarks that only read-once or write-once may perform better when
page reclaim is too aggressive. The primary upside is that slab
shrinker is less surprising (arguably more sane but that's a matter of
opinion), behaves consistently regardless of the fragmentation state of
the system and properly obeys VM sysctls.
A fsmark benchmark configuration was constructed similar to what Dave
reported and is codified by the mmtest configuration
config-io-fsmark-small-file-stream. It was evaluated on a 1-socket
machine to avoid dealing with NUMA-related issues and the timing of
reclaim. The storage was an SSD Samsung Evo and a fresh trimmed XFS
filesystem was used for the test data.
This is not an exact replication of Dave's setup. The configuration
scales its parameters depending on the memory size of the SUT to behave
similarly across machines. The parameters mean the first sample
reported by fs_mark is using 50% of RAM which will barely be throttled
and look like a big outlier. Dave used fake NUMA to have multiple
kswapd instances which I didn't replicate. Finally, the number of
iterations differ from Dave's test as the target disk was not large
enough. While not identical, it should be representative.
fsmark
5.3.0-rc3 5.3.0-rc3
vanilla shrinker-v1r1
Min 1-files/sec 4444.80 ( 0.00%) 4765.60 ( 7.22%)
1st-qrtle 1-files/sec 5005.10 ( 0.00%) 5091.70 ( 1.73%)
2nd-qrtle 1-files/sec 4917.80 ( 0.00%) 4855.60 ( -1.26%)
3rd-qrtle 1-files/sec 4667.40 ( 0.00%) 4831.20 ( 3.51%)
Max-1 1-files/sec 11421.50 ( 0.00%) 9999.30 ( -12.45%)
Max-5 1-files/sec 11421.50 ( 0.00%) 9999.30 ( -12.45%)
Max-10 1-files/sec 11421.50 ( 0.00%) 9999.30 ( -12.45%)
Max-90 1-files/sec 4649.60 ( 0.00%) 4780.70 ( 2.82%)
Max-95 1-files/sec 4491.00 ( 0.00%) 4768.20 ( 6.17%)
Max-99 1-files/sec 4491.00 ( 0.00%) 4768.20 ( 6.17%)
Max 1-files/sec 11421.50 ( 0.00%) 9999.30 ( -12.45%)
Hmean 1-files/sec 5004.75 ( 0.00%) 5075.96 ( 1.42%)
Stddev 1-files/sec 1778.70 ( 0.00%) 1369.66 ( 23.00%)
CoeffVar 1-files/sec 33.70 ( 0.00%) 26.05 ( 22.71%)
BHmean-99 1-files/sec 5053.72 ( 0.00%) 5101.52 ( 0.95%)
BHmean-95 1-files/sec 5053.72 ( 0.00%) 5101.52 ( 0.95%)
BHmean-90 1-files/sec 5107.05 ( 0.00%) 5131.41 ( 0.48%)
BHmean-75 1-files/sec 5208.45 ( 0.00%) 5206.68 ( -0.03%)
BHmean-50 1-files/sec 5405.53 ( 0.00%) 5381.62 ( -0.44%)
BHmean-25 1-files/sec 6179.75 ( 0.00%) 6095.14 ( -1.37%)
5.3.0-rc3 5.3.0-rc3
vanillashrinker-v1r1
Duration User 501.82 497.29
Duration System 4401.44 4424.08
Duration Elapsed 8124.76 8358.05
This is showing a slight skew for the max result representing a large
outlier for the 1st, 2nd and 3rd quartile are similar indicating that
the bulk of the results show little difference. Note that an earlier
version of the fsmark configuration showed a regression but that
included more samples taken while memory was still filling.
Note that the elapsed time is higher. Part of this is that the
configuration included time to delete all the test files when the test
completes -- the test automation handles the possibility of testing
fsmark with multiple thread counts. Without the patch, many of these
objects would be memory resident which is part of what the patch is
addressing.
There are other important observations that justify the patch.
1. With the vanilla kernel, the number of dirty pages in the system is
very low for much of the test. With this patch, dirty pages is
generally kept at 10% which matches vm.dirty_background_ratio which
is normal expected historical behaviour.
2. With the vanilla kernel, the ratio of Slab/Pagecache is close to
0.95 for much of the test i.e. Slab is being left alone and
dominating memory consumption. With the patch applied, the ratio
varies between 0.35 and 0.45 with the bulk of the measured ratios
roughly half way between those values. This is a different balance to
what Dave reported but it was at least consistent.
3. Slabs are scanned throughout the entire test with the patch applied.
The vanille kernel has periods with no scan activity and then
relatively massive spikes.
4. Without the patch, kswapd scan rates are very variable. With the
patch, the scan rates remain quite steady.
4. Overall vmstats are closer to normal expectations
5.3.0-rc3 5.3.0-rc3
vanilla shrinker-v1r1
Ops Direct pages scanned 99388.00 328410.00
Ops Kswapd pages scanned 45382917.00 33451026.00
Ops Kswapd pages reclaimed 30869570.00 25239655.00
Ops Direct pages reclaimed 74131.00 5830.00
Ops Kswapd efficiency % 68.02 75.45
Ops Kswapd velocity 5585.75 4002.25
Ops Page reclaim immediate 1179721.00 430927.00
Ops Slabs scanned 62367361.00 73581394.00
Ops Direct inode steals 2103.00 1002.00
Ops Kswapd inode steals 570180.00 5183206.00
o Vanilla kernel is hitting direct reclaim more frequently,
not very much in absolute terms but the fact the patch
reduces it is interesting
o "Page reclaim immediate" in the vanilla kernel indicates
dirty pages are being encountered at the tail of the LRU.
This is generally bad and means in this case that the LRU
is not long enough for dirty pages to be cleaned by the
background flush in time. This is much reduced by the
patch.
o With the patch, kswapd is reclaiming 10 times more slab
pages than with the vanilla kernel. This is indicative
of the watermark boosting over-protecting slab
A more complete set of tests were run that were part of the basis for
introducing boosting and while there are some differences, they are well
within tolerances.
Bottom line, the special casing kswapd to avoid slab behaviour is
unpredictable and can lead to abnormal results for normal workloads.
This patch restores the expected behaviour that slab and page cache is
balanced consistently for a workload with a steady allocation ratio of
slab/pagecache pages. It also means that if there are workloads that
favour the preservation of slab over pagecache that it can be tuned via
vm.vfs_cache_pressure where as the vanilla kernel effectively ignores
the parameter when boosting is active.
Link: http://lkml.kernel.org/r/20190808182946.GM2739@techsingularity.net
Fixes: 1c30844d2d ("mm: reclaim small amounts of memory when an external fragmentation event occurs")
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: <stable@vger.kernel.org> [5.0+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit 2f0799a0ff ("mm, thp: restore node-local
hugepage allocations").
commit 2f0799a0ff was rightfully applied to avoid the risk of a
severe regression that was reported by the kernel test robot at the end
of the merge window. Now we understood the regression was a false
positive and was caused by a significant increase in fairness during a
swap trashing benchmark. So it's safe to re-apply the fix and continue
improving the code from there. The benchmark that reported the
regression is very useful, but it provides a meaningful result only when
there is no significant alteration in fairness during the workload. The
removal of __GFP_THISNODE increased fairness.
__GFP_THISNODE cannot be used in the generic page faults path for new
memory allocations under the MPOL_DEFAULT mempolicy, or the allocation
behavior significantly deviates from what the MPOL_DEFAULT semantics are
supposed to be for THP and 4k allocations alike.
Setting THP defrag to "always" or using MADV_HUGEPAGE (with THP defrag
set to "madvise") has never meant to provide an implicit MPOL_BIND on
the "current" node the task is running on, causing swap storms and
providing a much more aggressive behavior than even zone_reclaim_node =
3.
Any workload who could have benefited from __GFP_THISNODE has now to
enable zone_reclaim_mode=1||2||3. __GFP_THISNODE implicitly provided
the zone_reclaim_mode behavior, but it only did so if THP was enabled:
if THP was disabled, there would have been no chance to get any 4k page
from the current node if the current node was full of pagecache, which
further shows how this __GFP_THISNODE was misplaced in MADV_HUGEPAGE.
MADV_HUGEPAGE has never been intended to provide any zone_reclaim_mode
semantics, in fact the two are orthogonal, zone_reclaim_mode = 1|2|3
must work exactly the same with MADV_HUGEPAGE set or not.
The performance characteristic of memory depends on the hardware
details. The numbers below are obtained on Naples/EPYC architecture and
the N/A projection extends them to show what we should aim for in the
future as a good THP NUMA locality default. The benchmark used
exercises random memory seeks (note: the cost of the page faults is not
part of the measurement).
D0 THP | D0 4k | D1 THP | D1 4k | D2 THP | D2 4k | D3 THP | D3 4k | ...
0% | +43% | +45% | +106% | +131% | +224% | N/A | N/A
D0 means distance zero (i.e. local memory), D1 means distance one (i.e.
intra socket memory), D2 means distance two (i.e. inter socket memory),
etc...
For the guest physical memory allocated by qemu and for guest mode
kernel the performance characteristic of RAM is more complex and an
ideal default could be:
D0 THP | D1 THP | D0 4k | D2 THP | D1 4k | D3 THP | D2 4k | D3 4k | ...
0% | +58% | +101% | N/A | +222% | N/A | N/A | N/A
NOTE: the N/A are projections and haven't been measured yet, the
measurement in this case is done on a 1950x with only two NUMA nodes.
The THP case here means THP was used both in the host and in the guest.
After applying this commit the THP NUMA locality order that we'll get
out of MADV_HUGEPAGE is this:
D0 THP | D1 THP | D2 THP | D3 THP | ... | D0 4k | D1 4k | D2 4k | D3 4k | ...
Before this commit it was:
D0 THP | D0 4k | D1 4k | D2 4k | D3 4k | ...
Even if we ignore the breakage of large workloads that can't fit in a
single node that the __GFP_THISNODE implicit "current node" mbind
caused, the THP NUMA locality order provided by __GFP_THISNODE was still
not the one we shall aim for in the long term (i.e. the first one at
the top).
After this commit is applied, we can introduce a new allocator multi
order API and to replace those two alloc_pages_vmas calls in the page
fault path, with a single multi order call:
unsigned int order = (1 << HPAGE_PMD_ORDER) | (1 << 0);
page = alloc_pages_multi_order(..., &order);
if (!page)
goto out;
if (!(order & (1 << 0))) {
VM_WARN_ON(order != 1 << HPAGE_PMD_ORDER);
/* THP fault */
} else {
VM_WARN_ON(order != 1 << 0);
/* 4k fallback */
}
The page allocator logic has to be altered so that when it fails on any
zone with order 9, it has to try again with a order 0 before falling
back to the next zone in the zonelist.
After that we need to do more measurements and evaluate if adding an
opt-in feature for guest mode is worth it, to swap "DN 4k | DN+1 THP"
with "DN+1 THP | DN 4k" at every NUMA distance crossing.
Link: http://lkml.kernel.org/r/20190503223146.2312-3-aarcange@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: Zi Yan <zi.yan@cs.rutgers.edu>
Cc: Stefan Priebe - Profihost AG <s.priebe@profihost.ag>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "reapply: relax __GFP_THISNODE for MADV_HUGEPAGE mappings".
The fixes for what was originally reported as "pathological THP
behavior" we rightfully reverted to be sure not to introduced
regressions at end of a merge window after a severe regression report
from the kernel bot. We can safely re-apply them now that we had time
to analyze the problem.
The mm process worked fine, because the good fixes were eventually
committed upstream without excessive delay.
The regression reported by the kernel bot however forced us to revert
the good fixes to be sure not to introduce regressions and to give us
the time to analyze the issue further. The silver lining is that this
extra time allowed to think more at this issue and also plan for a
future direction to improve things further in terms of THP NUMA
locality.
This patch (of 2):
This reverts commit 356ff8a9a7 ("Revert "mm, thp: consolidate THP
gfp handling into alloc_hugepage_direct_gfpmask"). So it reapplies
89c83fb539 ("mm, thp: consolidate THP gfp handling into
alloc_hugepage_direct_gfpmask").
Consolidation of the THP allocation flags at the same place was meant to
be a clean up to easier handle otherwise scattered code which is
imposing a maintenance burden. There were no real problems observed
with the gfp mask consolidation but the reversion was rushed through
without a larger consensus regardless.
This patch brings the consolidation back because this should make the
long term maintainability easier as well as it should allow future
changes to be less error prone.
[mhocko@kernel.org: changelog additions]
Link: http://lkml.kernel.org/r/20190503223146.2312-2-aarcange@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: Zi Yan <zi.yan@cs.rutgers.edu>
Cc: Stefan Priebe - Profihost AG <s.priebe@profihost.ag>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A compiler throws a warning on an arm64 system since commit 9849a5697d
("arch, mm: convert all architectures to use 5level-fixup.h"),
mm/kasan/init.c: In function 'kasan_free_p4d':
mm/kasan/init.c:344:9: warning: variable 'p4d' set but not used [-Wunused-but-set-variable]
p4d_t *p4d;
^~~
because p4d_none() in "5level-fixup.h" is compiled away while it is a
static inline function in "pgtable-nopud.h".
However, if converted p4d_none() to a static inline there, powerpc would
be unhappy as it reads those in assembler language in
"arch/powerpc/include/asm/book3s/64/pgtable.h", so it needs to skip
assembly include for the static inline C function.
While at it, converted a few similar functions to be consistent with the
ones in "pgtable-nopud.h".
Link: http://lkml.kernel.org/r/20190806232917.881-1-cai@lca.pw
Signed-off-by: Qian Cai <cai@lca.pw>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If you use lseek or similar (e.g. pread) to access a location in a
seq_file file that is within a record, rather than at a record boundary,
then the first read will return the remainder of the record, and the
second read will return the whole of that same record (instead of the
next record). When seeking to a record boundary, the next record is
correctly returned.
This bug was introduced by a recent patch (identified below). Before
that patch, seq_read() would increment m->index when the last of the
buffer was returned (m->count == 0). After that patch, we rely on
->next to increment m->index after filling the buffer - but there was
one place where that didn't happen.
Link: https://lkml.kernel.org/lkml/877e7xl029.fsf@notabene.neil.brown.name/
Fixes: 1f4aace60b ("fs/seq_file.c: simplify seq_file iteration code and interface")
Signed-off-by: NeilBrown <neilb@suse.com>
Reported-by: Sergei Turchanov <turchanov@farpost.com>
Tested-by: Sergei Turchanov <turchanov@farpost.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Markus Elfring <Markus.Elfring@web.de>
Cc: <stable@vger.kernel.org> [4.19+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Memcg counters for shadow nodes are broken because the memcg pointer is
obtained in a wrong way. The following approach is used:
virt_to_page(xa_node)->mem_cgroup
Since commit 4d96ba3530 ("mm: memcg/slab: stop setting
page->mem_cgroup pointer for slab pages") page->mem_cgroup pointer isn't
set for slab pages, so memcg_from_slab_page() should be used instead.
Also I doubt that it ever worked correctly: virt_to_head_page() should
be used instead of virt_to_page(). Otherwise objects residing on tail
pages are not accounted, because only the head page contains a valid
mem_cgroup pointer. That was a case since the introduction of these
counters by the commit 68d48e6a2d ("mm: workingset: add vmstat counter
for shadow nodes").
Link: http://lkml.kernel.org/r/20190801233532.138743-1-guro@fb.com
Fixes: 4d96ba3530 ("mm: memcg/slab: stop setting page->mem_cgroup pointer for slab pages")
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently, when checking to see if accessing n bytes starting at address
"ptr" will cause a wraparound in the memory addresses, the check in
check_bogus_address() adds an extra byte, which is incorrect, as the
range of addresses that will be accessed is [ptr, ptr + (n - 1)].
This can lead to incorrectly detecting a wraparound in the memory
address, when trying to read 4 KB from memory that is mapped to the the
last possible page in the virtual address space, when in fact, accessing
that range of memory would not cause a wraparound to occur.
Use the memory range that will actually be accessed when considering if
accessing a certain amount of bytes will cause the memory address to
wrap around.
Link: http://lkml.kernel.org/r/1564509253-23287-1-git-send-email-isaacm@codeaurora.org
Fixes: f5509cc18d ("mm: Hardened usercopy")
Signed-off-by: Prasad Sodagudi <psodagud@codeaurora.org>
Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org>
Co-developed-by: Prasad Sodagudi <psodagud@codeaurora.org>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Trilok Soni <tsoni@codeaurora.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If an error occurs during kmemleak_init() (e.g. kmem cache cannot be
created), kmemleak is disabled but kmemleak_early_log remains enabled.
Subsequently, when the .init.text section is freed, the log_early()
function no longer exists. To avoid a page fault in such scenario,
ensure that kmemleak_disable() also disables early logging.
Link: http://lkml.kernel.org/r/20190731152302.42073-1-catalin.marinas@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tony Luck