Merge reason: this topic is ready for upstream now. It passed
Oleg's review and Andrew had no further mm/*
objections/observations either.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Li Zefan found that there's a race using the event ids of events and
modules. When a module is loaded, an event id is incremented. We only
have 16 bits for event ids (65536) and there is a possible (but highly
unlikely) race that we could load and unload a module that registers
events so many times that the event id counter overflows.
When it overflows, it then restarts and goes looking for available
ids. An id is available if it was added by a module and released.
The race is if you have one module add an id, and then is removed.
Another module loaded can use that same event id. But if the old module
still had events in the ring buffer, the new module's call back would
get bogus data. At best (and most likely) the output would just be
garbage. But if the module for some reason used pointers (not recommended)
then this could potentially crash.
The safest thing to do is just reset the ring buffer if a module that
registered events is removed.
[ Impact: prevent unpredictable results of event id overflows ]
Reported-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <49FEAFD0.30106@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
A module will add/remove its trace events when it gets loaded/unloaded, so
the ftrace_events list is not "const", and concurrent access needs to be
protected.
This patch thus fixes races between loading/unloding modules and read
'available_events' or read/write 'set_event', etc.
Below shows how to reproduce the race:
# for ((; ;)) { cat /mnt/tracing/available_events; } > /dev/null &
# for ((; ;)) { insmod trace-events-sample.ko; rmmod sample; } &
After a while:
BUG: unable to handle kernel paging request at 0010011c
IP: [<c1080f27>] t_next+0x1b/0x2d
...
Call Trace:
[<c10c90e6>] ? seq_read+0x217/0x30d
[<c10c8ecf>] ? seq_read+0x0/0x30d
[<c10b4c19>] ? vfs_read+0x8f/0x136
[<c10b4fc3>] ? sys_read+0x40/0x65
[<c1002a68>] ? sysenter_do_call+0x12/0x36
[ Impact: fix races when concurrent accessing ftrace_events list ]
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4A00F709.3080800@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Replace the current event parser hack with a better one. Filters are
no longer specified predicate by predicate, but all at once and can
use parens and any of the following operators:
numeric fields:
==, !=, <, <=, >, >=
string fields:
==, !=
predicates can be combined with the logical operators:
&&, ||
examples:
"common_preempt_count > 4" > filter
"((sig >= 10 && sig < 15) || sig == 17) && comm != bash" > filter
If there was an error, the erroneous string along with an error
message can be seen by looking at the filter e.g.:
((sig >= 10 && sig < 15) || dsig == 17) && comm != bash
^
parse_error: Field not found
Currently the caret for an error always appears at the beginning of
the filter; a real position should be used, but the error message
should be useful even without it.
To clear a filter, '0' can be written to the filter file.
Filters can also be set or cleared for a complete subsystem by writing
the same filter as would be written to an individual event to the
filter file at the root of the subsytem. Note however, that if any
event in the subsystem lacks a field specified in the filter being
set, the set will fail and all filters in the subsytem are
automatically cleared. This change from the previous version was made
because using only the fields that happen to exist for a given event
would most likely result in a meaningless filter.
Because the logical operators are now implemented as predicates, the
maximum number of predicates in a filter was increased from 8 to 16.
[ Impact: add new, extended trace-filter implementation ]
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: fweisbec@gmail.com
Cc: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <1240905899.6416.121.camel@tropicana>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The new filter comparison ops need to be able to distinguish between
signed and unsigned field types, so add an is_signed flag/param to the
event field struct/trace_define_fields(). Also define a simple macro,
is_signed_type() to determine the signedness at compile time, used in the
trace macros. If the is_signed_type() macro won't work with a specific
type, a new slightly modified version of TRACE_FIELD() called
TRACE_FIELD_SIGN(), allows the signedness to be set explicitly.
[ Impact: extend trace-filter code for new feature ]
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: fweisbec@gmail.com
Cc: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <1240905893.6416.120.camel@tropicana>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Create a new event_filter object, and move the pred-related members
out of the call and subsystem objects and into the filter object - the
details of the filter implementation don't need to be exposed in the
call and subsystem in any case, and it will also help make the new
parser implementation a little cleaner.
[ Impact: refactor trace-filter code to prepare for new features ]
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: fweisbec@gmail.com
Cc: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <1240905887.6416.119.camel@tropicana>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Conflicts:
arch/x86/kernel/ptrace.c
Merge reason: fix the conflict above, and also pick up the CONFIG_BROKEN
dependency change from upstream so that we can remove it
here.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
struct trace_entry->type is unsigned char, while trace event's id is
int type, thus for a event with id >= 256, it's entry->type is cast
to (id % 256), and then we can't see the trace output of this event.
# insmod trace-events-sample.ko
# echo foo_bar > /mnt/tracing/set_event
# cat /debug/tracing/events/trace-events-sample/foo_bar/id
256
# cat /mnt/tracing/trace_pipe
<...>-3548 [001] 215.091142: Unknown type 0
<...>-3548 [001] 216.089207: Unknown type 0
<...>-3548 [001] 217.087271: Unknown type 0
<...>-3548 [001] 218.085332: Unknown type 0
[ Impact: fix output for trace events with id >= 256 ]
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <49EEDB0E.5070207@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch adds a filter_mutex to prevent the filter predicates from
being accessed concurrently by various external functions.
It's based on a previous patch by Li Zefan:
"[PATCH 7/7] tracing/filters: make filter preds RCU safe"
v2 changes:
- fixed wrong value returned in a add_subsystem_pred() failure case
noticed by Li Zefan.
[ Impact: fix trace filter corruption/crashes on parallel access ]
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Tested-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: paulmck@linux.vnet.ibm.com
LKML-Reference: <1239946028.6639.13.camel@tropicana>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: makes it possible to define events in modules
The events are created by reading down the section that they are linked
in by the macros. But this is not scalable to modules. This patch converts
the manipulations to use a global link list, and on boot up it adds
the items in the section to the list.
This change will allow modules to add their tracing events to the list as
well.
Note, this change alone does not permit modules to use the TRACE_EVENT macros,
but the change is needed for them to eventually do so.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In preparation to allowing trace events to happen in modules, we need
to move some of the local declarations in the kernel/trace directory
into include/linux.
This patch simply moves the declarations and performs no context changes.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In the process to make TRACE_EVENT macro work for modules, the trace_seq
operations must be available for core kernel code.
These operations are quite useful and can be used for other implementations.
The main idea is that we create a trace_seq handle that acts very much
like the seq_file handle.
struct trace_seq *s = kmalloc(sizeof(*s, GFP_KERNEL);
trace_seq_init(s);
trace_seq_printf(s, "some data %d\n", variable);
printk("%s", s->buffer);
The main use is to allow a top level function call several other functions
that may store printf like data into the buffer. Then at the end, the top
level function can process all the data with any method it would like to.
It could be passed to userspace, output via printk or even use seq_file:
trace_seq_to_user(s, ubuf, cnt);
seq_puts(m, s->buffer);
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This patch allows event filters to be safely removed or switched
on-the-fly while avoiding the use of rcu or the suspension of tracing of
previous versions.
It does it by adding a new filter_pred_none() predicate function which
does nothing and by never deallocating either the predicates or any of
the filter_pred members used in matching; the predicate lists are
allocated and initialized during ftrace_event_calls initialization.
Whenever a filter is removed or replaced, the filter_pred_* functions
currently in use by the affected ftrace_event_call are immediately
switched over to to the filter_pred_none() function, while the rest of
the filter_pred members are left intact, allowing any currently
executing filter_pred_* functions to finish up, using the values they're
currently using.
In the case of filter replacement, the new predicate values are copied
into the old predicates after the above step, and the filter_pred_none()
functions are replaced by the filter_pred_* functions for the new
filter. In this case, it is possible though very unlikely that a
previous filter_pred_* is still running even after the
filter_pred_none() switch and the switch to the new filter_pred_*. In
that case, however, because nothing has been deallocated in the
filter_pred, the worst that can happen is that the old filter_pred_*
function sees the new values and as a result produces either a false
positive or a false negative, depending on the values it finds.
So one downside to this method is that rarely, it can produce a bad
match during the filter switch, but it should be possible to live with
that, IMHO.
The other downside is that at least in this patch the predicate lists
are always pre-allocated, taking up memory from the start. They could
probably be allocated on first-use, and de-allocated when tracing is
completely stopped - if this patch makes sense, I could create another
one to do that later on.
Oh, and it also places a restriction on the size of __arrays in events,
currently set to 128, since they can't be larger than the now embedded
str_val arrays in the filter_pred struct.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: paulmck@linux.vnet.ibm.com
LKML-Reference: <1239610670.6660.49.camel@tropicana>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch changes filter_check_discard() to make use of the new
ring_buffer_discard_commit() function and modifies the current users to
call the old commit function in the non-discard case.
It also introduces a version of filter_check_discard() that uses the
global trace buffer (filter_current_check_discard()) for those cases.
v2 changes:
- fix compile error noticed by Ingo Molnar
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: fweisbec@gmail.com
LKML-Reference: <1239178554.10295.36.camel@tropicana>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The ring_buffer_discard_commit makes better usage of the ring_buffer
when an event has been discarded. It tries to remove it completely if
possible.
This patch converts the trace event filtering to use
ring_buffer_discard_commit instead of the ring_buffer_event_discard.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Frederic Weisbecker suggested that the trace_special event shouldn't be
filterable; this patch adds a TRACE_EVENT_FORMAT_NOFILTER event macro
that allows an event format to be exported without having a filter
attached, and removes filtering from the trace_special event.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch adds run-time field descriptions to all the event formats
exported using TRACE_EVENT_FORMAT. It also hooks up all the tracers
that use them (i.e. the tracers in the 'ftrace subsystem') so they can
also have their output filtered by the event-filtering mechanism.
When I was testing this, there were a couple of things that fooled me
into thinking the filters weren't working, when actually they were -
I'll mention them here so others don't make the same mistakes (and file
bug reports. ;-)
One is that some of the tracers trace multiple events e.g. the
sched_switch tracer uses the context_switch and wakeup events, and if
you don't set filters on all of the traced events, the unfiltered output
from the events without filters on them can make it look like the
filtering as a whole isn't working properly, when actually it is doing
what it was asked to do - it just wasn't asked to do the right thing.
The other is that for the really high-volume tracers e.g. the function
tracer, the volume of filtered events can be so high that it pushes the
unfiltered events out of the ring buffer before they can be read so e.g.
cat'ing the trace file repeatedly shows either no output, or once in
awhile some output but that isn't there the next time you read the
trace, which isn't what you normally expect when reading the trace file.
If you read from the trace_pipe file though, you can catch them before
they disappear.
Changes from v1:
As suggested by Frederic Weisbecker:
- get rid of externs in functions
- added unlikely() to filter_check_discard()
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: refactor code for future changes
Current kmemtrace.h is used both as header file of kmemtrace and kmem's
tracepoints definition.
Tracepoints' definition file may be used by other code, and should only have
definition of tracepoint.
We can separate include/trace/kmemtrace.h into 2 files:
include/linux/kmemtrace.h: header file for kmemtrace
include/trace/kmem.h: definition of kmem tracepoints
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Acked-by: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <49DEE68A.5040902@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
branch tracer, intel-iommu: fix build with CONFIG_BRANCH_TRACER=y
branch tracer: Fix for enabling branch profiling makes sparse unusable
ftrace: Correct a text align for event format output
Update /debug/tracing/README
tracing/ftrace: alloc the started cpumask for the trace file
tracing, x86: remove duplicated #include
ftrace: Add check of sched_stopped for probe_sched_wakeup
function-graph: add proper initialization for init task
tracing/ftrace: fix missing include string.h
tracing: fix incorrect return type of ns2usecs()
tracing: remove CALLER_ADDR2 from wakeup tracer
blktrace: fix pdu_len when tracing packet command requests
blktrace: small cleanup in blk_msg_write()
blktrace: NUL-terminate user space messages
tracing: move scripts/trace/power.pl to scripts/tracing/power.pl
Impact: cleanup
Most of the tracing files creation follow the same pattern:
ret = debugfs_create_file(...)
if (!ret)
pr_warning("Couldn't create ... entry\n")
Unify it!
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1238109938-11840-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Impact: fix time output bug in 32bits system
ns2usecs() returns 'long', it's incorrect.
(In i386)
...
<idle>-0 [000] 521.442100: _spin_lock <-tick_do_update_jiffies64
<idle>-0 [000] 521.442101: do_timer <-tick_do_update_jiffies64
<idle>-0 [000] 521.442102: update_wall_time <-do_timer
<idle>-0 [000] 521.442102: update_xtime_cache <-update_wall_time
....
(It always print the time less than 2200 seconds besides ...)
Because 'long' is 32bits in i386. ( (1<<31) useconds is about 2200 seconds)
...
<idle>-0 [001] 4154502640.134759: rcu_bh_qsctr_inc <-__do_softirq
<idle>-0 [001] 4154502640.134760: _local_bh_enable <-__do_softirq
<idle>-0 [001] 4154502640.134761: idle_cpu <-irq_exit
...
(very large value)
Because 'long' is a signed type and it is 32bits in i386.
Changes in v2:
return 'unsigned long long' instead of 'cycle_t'
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <49D05D10.4030009@cn.fujitsu.com>
Reported-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
kmemtrace now uses tracepoints instead of markers. We no longer need to
use format specifiers to pass arguments.
Signed-off-by: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
[ folded: Use the new TP_PROTO and TP_ARGS to fix the build. ]
[ folded: fix build when CONFIG_KMEMTRACE is disabled. ]
[ folded: define tracepoints when CONFIG_TRACEPOINTS is enabled. ]
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
LKML-Reference: <ae61c0f37156db8ec8dc0d5778018edde60a92e3.1237813499.git.eduard.munteanu@linux360.ro>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
graph time is the time that a function is executing another function.
Thus if function A calls B, if graph-time is set, then the time for
A includes B. This is the default behavior. But if graph-time is off,
then the time spent executing B is subtracted from A.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
If the function graph trace is enabled, the function profiler will
use it to take the timing of the functions.
cat /debug/tracing/trace_stat/functions
Function Hit Time
-------- --- ----
mwait_idle 127 183028.4 us
schedule 26 151997.7 us
__schedule 31 151975.1 us
sys_wait4 2 74080.53 us
do_wait 2 74077.80 us
sys_newlstat 138 39929.16 us
do_path_lookup 179 39845.79 us
vfs_lstat_fd 138 39761.97 us
user_path_at 153 39469.58 us
path_walk 179 39435.76 us
__link_path_walk 189 39143.73 us
[...]
Note the times are skewed due to the function graph tracer not taking
into account schedules.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: give user a choice to show times spent while sleeping
The user may want to see the time a function spent sleeping.
This patch adds the trace option "sleep-time" to allow that.
The "sleep-time" option is default on.
echo sleep-time > /debug/tracing/trace_options
produces:
------------------------------------------
2) avahi-d-3428 => <idle>-0
------------------------------------------
2) | finish_task_switch() {
2) 0.621 us | _spin_unlock_irq();
2) 2.202 us | }
2) ! 1002.197 us | }
2) ! 1003.521 us | }
where as,
echo nosleep-time > /debug/tracing/trace_options
produces:
0) <idle>-0 => yum-upd-3416
------------------------------------------
0) | finish_task_switch() {
0) 0.643 us | _spin_unlock_irq();
0) 2.342 us | }
0) + 41.302 us | }
0) + 42.453 us | }
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: cleanup
Instead of just using the trace_seq buffer to print the filters, use
trace_seq_printf() as it was intended to be used.
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: =?ISO-8859-1?Q?Fr=E9d=E9ric?= Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1237878871.8339.59.camel@charm-linux>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix hard-lockup with sched switch events
Some ftrace events, such as sched wakeup, can be traced
while the runqueue lock is hold. Since they are using
trace_current_buffer_unlock_commit(), they call wake_up()
which can try to grab the runqueue lock too, resulting in
a deadlock.
Now for all event, we call a new helper:
trace_nowake_buffer_unlock_commit() which do pretty the same than
trace_current_buffer_unlock_commit() except than it doesn't call
trace_wake_up().
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1237759847-21025-4-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch adds per-subsystem filtering to the event tracing subsystem.
It adds a 'filter' debugfs file to each subsystem directory. This file
can be written to to set filters; reading from it will display the
current set of filters set for that subsystem.
Basically what it does is propagate the filter down to each event
contained in the subsystem. If a particular event doesn't have a field
with the name specified in the filter, it simply doesn't get set for
that event. You can verify whether or not the filter was set for a
particular event by looking at the filter file for that event.
As with per-event filters, compound expressions are supported, echoing
'0' to the subsystem's filter file clears all filters in the subsystem,
etc.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1237710677.7703.49.camel@charm-linux>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch adds per-event filtering to the event tracing subsystem.
It adds a 'filter' debugfs file to each event directory. This file can
be written to to set filters; reading from it will display the current
set of filters set for that event.
Basically, any field listed in the 'format' file for an event can be
filtered on (including strings, but not yet other array types) using
either matching ('==') or non-matching ('!=') 'predicates'. A
'predicate' can be either a single expression:
# echo pid != 0 > filter
# cat filter
pid != 0
or a compound expression of up to 8 sub-expressions combined using '&&'
or '||':
# echo comm == Xorg > filter
# echo "&& sig != 29" > filter
# cat filter
comm == Xorg
&& sig != 29
Only events having field values matching an expression will be available
in the trace output; non-matching events are discarded.
Note that a compound expression is built up by echoing each
sub-expression separately - it's not the most efficient way to do
things, but it keeps the parser simple and assumes that compound
expressions will be relatively uncommon. In any case, a subsequent
patch introducing a way to set filters for entire subsystems should
mitigate any need to do this for lots of events.
Setting a filter without an '&&' or '||' clears the previous filter
completely and sets the filter to the new expression:
# cat filter
comm == Xorg
&& sig != 29
# echo comm != Xorg
# cat filter
comm != Xorg
To clear a filter, echo 0 to the filter file:
# echo 0 > filter
# cat filter
none
The limit of 8 predicates for a compound expression is arbitrary - for
efficiency, it's implemented as an array of pointers to predicates, and
8 seemed more than enough for any filter...
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1237710665.7703.48.camel@charm-linux>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch makes the field descriptions defined for event tracing
available at run-time, for the event-filtering mechanism introduced
in a subsequent patch.
The common event fields are prepended with 'common_' in the format
display, allowing them to be distinguished from the other fields
that might internally have same name and can therefore be
unambiguously used in filters.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1237710639.7703.46.camel@charm-linux>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: new tracing infrastructure feature
Provide infrastructure to generate software perf counter events
from tracepoints.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20090319194233.557364871@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The function depth in trace_printk was to facilitate the function
graph output. Now that the function graph calculates the depth within
the trace output, we no longer need to record the depth when the
trace_printk is called.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: feature to allow better serialized clock
This patch adds an option called "global-clock" that will allow
the tracer to switch to a slower but more accurate (across CPUs)
clock.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: fix to one cause of incorrect comm outputs in trace
The spinlock only protected the creation of a comm <=> pid pair.
But it was possible that a reader could look up a pid, and get the
wrong comm because it had no locking.
This also required changing trace_find_cmdline to copy the comm cache
and not just send back a pointer to it.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: new feature
This adds the generic support for syscalls tracing. This is
currently exploited through a devoted tracer but other tracing
engines can use it. (They just have to play with
{start,stop}_ftrace_syscalls() and use the display callbacks
unless they want to override them.)
The syscalls prototypes definitions are abused here to steal
some metadata informations:
- syscall name, param types, param names, number of params
The syscall addr is not directly saved during this definition
because we don't know if its prototype is available in the
namespace. But we don't really need it. The arch has just to
build a function able to resolve the syscall number to its
metadata struct.
The current tracer prints the syscall names, parameters names
and values (and their types optionally). Currently the value is
a raw hex but higher level values diplaying is on my TODO list.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1236955332-10133-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add a selftest for the hw-branch-tracer.
Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
LKML-Reference: <20090313105027.A30183@sedona.ch.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Provide basic callbacks to do syscall tracing.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <1236401580-5758-2-git-send-email-fweisbec@gmail.com>
[ simplified it to a trace_printk() for now. ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: documentation
The use of the double __builtin_contant_p checks in the event_trace_printk
can be confusing to developers and reviewers. This patch adds a comment
to explain why it is there.
Requested-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
LKML-Reference: <20090313122235.43EB.A69D9226@jp.fujitsu.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: speed up on event tracing
The event_trace_printk is currently a wrapper function that calls
trace_vprintk. Because it uses a variable for the fmt it misses out
on the optimization of using the binary printk.
This patch makes event_trace_printk into a macro wrapper to use the
fmt as the same as the trace_printks.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: fix callsites with dynamic format strings
Since its new binary implementation, trace_printk() internally uses static
containers for the format strings on each callsites. But the value is
assigned once at build time, which means that it can't take dynamic
formats.
So this patch unearthes the raw trace_printk implementation for the callers
that will need trace_printk to be able to carry these dynamic format
strings. The trace_printk() macro will use the appropriate implementation
for each callsite. Most of the time however, the binary implementation will
still be used.
The other impact of this patch is that mmiotrace_printk() will use the old
implementation because it calls the low level trace_vprintk and we can't
guess here whether the format passed in it is dynamic or not.
Some parts of this patch have been written by Steven Rostedt (most notably
the part that chooses the appropriate implementation for each callsites).
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
To save memory, the tracer ring buffers are set to a minimum.
The activating of a trace expands the ring buffer size. This patch
adds this expanding, when an event is activated.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: clean up and enhancement
The TRACE_EVENT_FORMAT macro looks quite ugly and is limited in its
ability to save data as well as to print the record out. Working with
Ingo Molnar, we came up with a new format that is much more pleasing to
the eye of C developers. This new macro is more C style than the old
macro, and is more obvious to what it does.
Here's the example. The only updated macro in this patch is the
sched_switch trace point.
The old method looked like this:
TRACE_EVENT_FORMAT(sched_switch,
TP_PROTO(struct rq *rq, struct task_struct *prev,
struct task_struct *next),
TP_ARGS(rq, prev, next),
TP_FMT("task %s:%d ==> %s:%d",
prev->comm, prev->pid, next->comm, next->pid),
TRACE_STRUCT(
TRACE_FIELD(pid_t, prev_pid, prev->pid)
TRACE_FIELD(int, prev_prio, prev->prio)
TRACE_FIELD_SPECIAL(char next_comm[TASK_COMM_LEN],
next_comm,
TP_CMD(memcpy(TRACE_ENTRY->next_comm,
next->comm,
TASK_COMM_LEN)))
TRACE_FIELD(pid_t, next_pid, next->pid)
TRACE_FIELD(int, next_prio, next->prio)
),
TP_RAW_FMT("prev %d:%d ==> next %s:%d:%d")
);
The above method is hard to read and requires two format fields.
The new method:
/*
* Tracepoint for task switches, performed by the scheduler:
*
* (NOTE: the 'rq' argument is not used by generic trace events,
* but used by the latency tracer plugin. )
*/
TRACE_EVENT(sched_switch,
TP_PROTO(struct rq *rq, struct task_struct *prev,
struct task_struct *next),
TP_ARGS(rq, prev, next),
TP_STRUCT__entry(
__array( char, prev_comm, TASK_COMM_LEN )
__field( pid_t, prev_pid )
__field( int, prev_prio )
__array( char, next_comm, TASK_COMM_LEN )
__field( pid_t, next_pid )
__field( int, next_prio )
),
TP_printk("task %s:%d [%d] ==> %s:%d [%d]",
__entry->prev_comm, __entry->prev_pid, __entry->prev_prio,
__entry->next_comm, __entry->next_pid, __entry->next_prio),
TP_fast_assign(
memcpy(__entry->next_comm, next->comm, TASK_COMM_LEN);
__entry->prev_pid = prev->pid;
__entry->prev_prio = prev->prio;
memcpy(__entry->prev_comm, prev->comm, TASK_COMM_LEN);
__entry->next_pid = next->pid;
__entry->next_prio = next->prio;
)
);
This macro is called TRACE_EVENT, it is broken up into 5 parts:
TP_PROTO: the proto type of the trace point
TP_ARGS: the arguments of the trace point
TP_STRUCT_entry: the structure layout of the entry in the ring buffer
TP_printk: the printk format
TP_fast_assign: the method used to write the entry into the ring buffer
The structure is the definition of how the event will be saved in the
ring buffer. The printk is used by the internal tracing in case of
an oops, and the kernel needs to print out the format of the record
to the console. This the TP_printk gives a means to show the records
in a human readable format. It is also used to print out the data
from the trace file.
The TP_fast_assign is executed directly. It is basically like a C function,
where the __entry is the handle to the record.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Ingo Molnar