This is done as a preparation stage before setting the bridge port flags
from the bridge code. Currently the device can be queried for the bridge
flags state, but the querier cannot distinguish if the flag is disabled
or if it is not supported at all. Thus, add new attr and a bit-mask which
include information regarding the support on a per-flag basis.
Drivers that support bridge offload but not support bridge flags should
return zeroed bitmask.
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----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=0fbW
-----END PGP SIGNATURE-----
Merge tag 'rxrpc-rewrite-20170607-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
David Howells says:
====================
rxrpc: Tx length parameter
Here's a set of patches that allows someone initiating a client call with
AF_RXRPC to indicate upfront the total amount of data that will be
transmitted. This will allow AF_RXRPC to encrypt directly from source
buffer to packet rather than having to copy into the buffer and only
encrypt when it's full (the encrypted portion of the packet starts with a
length and so we can't encrypt until we know what the length will be).
The three patches are:
(1) Provide a means of finding out what control message types are actually
supported. EINVAL is reported if an unsupported cmsg type is seen, so
we don't want to set the new cmsg unless we know it will be accepted.
(2) Consolidate some stuff into a struct to reduce the parameter count on
the function that parses the cmsg buffer.
(3) Introduce the RXRPC_TX_LENGTH cmsg. This can be provided on the first
sendmsg() that contributes data to a client call request or a service
call reply. If provided, the user must provide exactly that amount of
data or an error will be incurred.
Changes in version 2:
(*) struct rxrpc_send_params::tx_total_len should be s64 not u64. Thanks to
Julia Lawall for reporting this.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
DRAM supply shortage and poor memory pressure tracking in TCP
stack makes any change in SO_SNDBUF/SO_RCVBUF (or equivalent autotuning
limits) and tcp_mem[] quite hazardous.
TCPMemoryPressures SNMP counter is an indication of tcp_mem sysctl
limits being hit, but only tracking number of transitions.
If TCP stack behavior under stress was perfect :
1) It would maintain memory usage close to the limit.
2) Memory pressure state would be entered for short times.
We certainly prefer 100 events lasting 10ms compared to one event
lasting 200 seconds.
This patch adds a new SNMP counter tracking cumulative duration of
memory pressure events, given in ms units.
$ cat /proc/sys/net/ipv4/tcp_mem
3088 4117 6176
$ grep TCP /proc/net/sockstat
TCP: inuse 180 orphan 0 tw 2 alloc 234 mem 4140
$ nstat -n ; sleep 10 ; nstat |grep Pressure
TcpExtTCPMemoryPressures 1700
TcpExtTCPMemoryPressuresChrono 5209
v2: Used EXPORT_SYMBOL_GPL() instead of EXPORT_SYMBOL() as David
instructed.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We want to move some TCP sysctls to net namespaces in the future.
tcp_window_scaling, tcp_sack and tcp_timestamps being fetched
from tcp_parse_options(), we need to pass an extra parameter.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of using the SKB queue with the fake pkt_type for the
offloaded RX BA session management, also handle this with the
normal aggregation state machine worker. This also makes the
use of this more reliable since it gets rid of the allocation
of the fake skb.
Combined with the previous patch, this finally allows us to
get rid of the pkt_type hack entirely, so do that as well.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This brings in commit 7a7c0a6438 ("mac80211: fix TX aggregation
start/stop callback race") to allow the follow-up cleanup.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Provide a control message that can be specified on the first sendmsg() of a
client call or the first sendmsg() of a service response to indicate the
total length of the data to be transmitted for that call.
Currently, because the length of the payload of an encrypted DATA packet is
encrypted in front of the data, the packet cannot be encrypted until we
know how much data it will hold.
By specifying the length at the beginning of the transmit phase, each DATA
packet length can be set before we start loading data from userspace (where
several sendmsg() calls may contribute to a particular packet).
An error will be returned if too little or too much data is presented in
the Tx phase.
Signed-off-by: David Howells <dhowells@redhat.com>
Add XFRMA_ENCAP, UDP encapsulation port, to km_migrate announcement
to userland. Only add if XFRMA_ENCAP was in user migrate request.
Signed-off-by: Antony Antony <antony@phenome.org>
Reviewed-by: Richard Guy Briggs <rgb@tricolour.ca>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Add UDP encapsulation port to XFRM_MSG_MIGRATE using an optional
netlink attribute XFRMA_ENCAP.
The devices that support IKE MOBIKE extension (RFC-4555 Section 3.8)
could go to sleep for a few minutes and wake up. When it wake up the
NAT mapping could have expired, the device send a MOBIKE UPDATE_SA
message to migrate the IPsec SA. The change could be a change UDP
encapsulation port, IP address, or both.
Reported-by: Paul Wouters <pwouters@redhat.com>
Signed-off-by: Antony Antony <antony@phenome.org>
Reviewed-by: Richard Guy Briggs <rgb@tricolour.ca>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
In commit d77e38e612 ("xfrm: Add an IPsec hardware offloading API") we
make xfrm_device.o only compiled when enable option CONFIG_XFRM_OFFLOAD.
But this will make xfrm_dev_event() missing if we only enable default XFRM
options.
Then if we set down and unregister an interface with IPsec on it. there
will no xfrm_garbage_collect(), which will cause dev usage count hold and
get error like:
unregister_netdevice: waiting for <dev> to become free. Usage count = 4
Fixes: d77e38e612 ("xfrm: Add an IPsec hardware offloading API")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Introduce a helper called is_tcf_gact_trap which could be used to
tell if the action is gact trap or not.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Yotam Gigi <yotamg@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit d91824c08f ("genetlink: register family ops as array") removed the
ops_list member from both genl_family and genl_ops; while the
documentation of genl_family was updated accordingly by this patch,
ops_list remained in the documentation of the genl_ops object.
This patch fixes it by removing ops_list from genl_ops documentation.
Signed-off-by: Rami Rosen <rami.rosen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Update tcp.txt to fix mandatory congestion control ops and default
CCA selection. Also, fix comment in tcp.h for undo_cwnd.
Signed-off-by: Anmol Sarma <me@anmolsarma.in>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander reported various KASAN messages triggered in recent kernels
The problem is that ping sockets should not use udp_poll() in the first
place, and recent changes in UDP stack finally exposed this old bug.
Fixes: c319b4d76b ("net: ipv4: add IPPROTO_ICMP socket kind")
Fixes: 6d0bfe2261 ("net: ipv6: Add IPv6 support to the ping socket.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Sasha Levin <alexander.levin@verizon.com>
Cc: Solar Designer <solar@openwall.com>
Cc: Vasiliy Kulikov <segoon@openwall.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Acked-By: Lorenzo Colitti <lorenzo@google.com>
Tested-By: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The command
# arp -s 62.2.0.1 a🅱️c:d:e:f dev eth2
adds an entry like the following (listed by "arp -an")
? (62.2.0.1) at 0a:0b:0c:0d:0e:0f [ether] PERM on eth2
but the symmetric deletion command
# arp -i eth2 -d 62.2.0.1
does not remove the PERM entry from the table, and instead leaves behind
? (62.2.0.1) at <incomplete> on eth2
The reason is that there is a refcnt of 1 for the arp_tbl itself
(neigh_alloc starts off the entry with a refcnt of 1), thus
the neigh_release() call from arp_invalidate() will (at best) just
decrement the ref to 1, but will never actually free it from the
table.
To fix this, we need to do something like neigh_forced_gc: if
the refcnt is 1 (i.e., on the table's ref), remove the entry from
the table and free it. This patch refactors and shares common code
between neigh_forced_gc and the newly added neigh_remove_one.
A similar issue exists for IPv6 Neighbor Cache entries, and is fixed
in a similar manner by this patch.
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Reviewed-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>
There was no reason for duplicating the code that initializes
ds->enabled_port_mask in both dsa_parse_ports_dn() and
dsa_parse_ports(), instead move this to dsa_ds_parse() which is early
enough before ops->setup() has run.
While at it, we can now make dsa_is_cpu_port() check ds->cpu_port_mask
which is a step towards being multi-CPU port capable.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for dissection of ip tos and ttl and ipv6 traffic-class
and hoplimit. Both are dissected into the same struct.
Uses similar call to ip dissection function as with tcp, arp and others.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since last patch, sctp doesn't need to alloc memory for asoc->stream any
more. sctp_stream_new and sctp_stream_init both are used to alloc memory
for stream.in or stream.out, and their names are also confusing.
This patch is to merge them into sctp_stream_init, and only pass stream
and streamcnt parameters into it, instead of the whole asoc.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As Marcelo's suggestion, stream is a fixed size member of asoc and would
not grow with more streams. To avoid an allocation for it, this patch is
to define it as an object instead of pointer and update the places using
it, also create sctp_stream_update() called in sctp_assoc_update() to
migrate the stream info from one stream to another.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since dev->dsa_ptr is a pointer to a dsa_switch_tree, there is no need
to have another inline helper just to check rcv.
Remove dsa_uses_tagged_protocol and check dsa_ptr && dsa_ptr->rcv
together at the same time.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The DSA layer uses inline helpers and copy of the tagging functions for
faster access in hot path. Add comments to detail that.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adding support for the Microchip KSZ switch family tail tagging.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Woojung Huh <Woojung.Huh@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Forgetting to disable preemption around tcf_action_stats_update()
seems to be a common mistake. Add a helper function for updating
stats on all actions of a filter.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current dsa_register_switch function takes a useless struct device
pointer argument, which always equals ds->dev.
Drivers either call it with ds->dev, or with the same device pointer
passed to dsa_switch_alloc, which ends up being assigned to ds->dev.
This patch removes the second argument of the dsa_register_switch and
_dsa_register_switch functions.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass extack arg down to lwtunnel_build_state and the build_state callbacks.
Add messages for failures in lwtunnel_build_state, and add the extarg to
nla_parse where possible in the build_state callbacks.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass extack down to lwtunnel_valid_encap_type and
lwtunnel_valid_encap_type_attr. Add messages for unknown
or unsupported encap types.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add extack error message for invalid prefix length and invalid prefix.
Example of the latter is a route spec containing 172.16.100.1/24, where
the /24 mask means the lower 8-bits should be 0. Amazing how easy that
one is to overlook when an EINVAL is returned.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds the infrastructure to support several implementations of
the same set type. This selection will be based on the set description
and the features available for this set. This allow us to select set
backend implementation that will result in better performance numbers.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
sledgehammer to be used on module unload (to remove affected conntracks
from all namespaces).
It will also flag all unconfirmed conntracks as dying, i.e. they will
not be committed to main table.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
There are several places where we needlesly call nf_ct_iterate_cleanup,
we should instead iterate the full table at module unload time.
This is a leftover from back when the conntrack table got duplicated
per net namespace.
So rename nf_ct_iterate_cleanup to nf_ct_iterate_cleanup_net.
A later patch will then add a non-net variant.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Whenever a user changes bonding options, a NETDEV_CHANGEINFODATA
notificatin is generated which results in a rtnelink message to
be sent. While runnig 'ip monitor', we can actually see 2 messages,
one a result of the event, and the other a result of state change
that is generated bo netdev_state_change(). However, this is not
always the case. If bonding changes were done via sysfs or ifenslave
(old ioctl interface), then only 1 message is seen.
This patch removes duplicate messages in the case of using netlink
to configure bonding. It introduceds a separte function that
triggers a netdev event and uses that function in the syfs and ioctl
cases.
This was discovered while auditing all the different envents and
continues the effort of cleaning up duplicated netlink messages.
CC: David Ahern <dsa@cumulusnetworks.com>
CC: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Overlapping changes in drivers/net/phy/marvell.c, bug fix in 'net'
restricting a HW workaround alongside cleanups in 'net-next'.
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrey Konovalov reported crashes in ipv4_mtu()
I could reproduce the issue with KASAN kernels, between
10.246.7.151 and 10.246.7.152 :
1) 20 concurrent netperf -t TCP_RR -H 10.246.7.152 -l 1000 &
2) At the same time run following loop :
while :
do
ip ro add 10.246.7.152 dev eth0 src 10.246.7.151 mtu 1500
ip ro del 10.246.7.152 dev eth0 src 10.246.7.151 mtu 1500
done
Cong Wang attempted to add back rt->fi in commit
82486aa6f1 ("ipv4: restore rt->fi for reference counting")
but this proved to add some issues that were complex to solve.
Instead, I suggested to add a refcount to the metrics themselves,
being a standalone object (in particular, no reference to other objects)
I tried to make this patch as small as possible to ease its backport,
instead of being super clean. Note that we believe that only ipv4 dst
need to take care of the metric refcount. But if this is wrong,
this patch adds the basic infrastructure to extend this to other
families.
Many thanks to Julian Anastasov for reviewing this patch, and Cong Wang
for his efforts on this problem.
Fixes: 2860583fe8 ("ipv4: Kill rt->fi")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Prefix is needed for returning matching route spec on get route request.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A later patch wants access to the fib result on an input route lookup
with the rcu lock held. Refactor ip_route_input_noref pushing the logic
between rcu_read_lock ... rcu_read_unlock into a new helper that takes
the fib_result as an input arg.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A later patch wants access to the fib result on an output route lookup
with the rcu lock held. Refactor __ip_route_output_key_hash, pushing
the logic between rcu_read_lock ... rcu_read_unlock into a new helper
with the fib_result as an input arg.
To keep the name length under control remove the leading underscores
from the name and add _rcu to the name of the new helper indicating it
is called with the rcu read lock held.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johan Hedberg says:
====================
pull request: bluetooth-next 2017-05-23
Here's the first Bluetooth & 802.15.4 pull request targeting the 4.13
kernel release.
- Bluetooth 5.0 improvements (Data Length Extensions and alternate PHY)
- Support for new Intel Bluetooth adapter [[8087:0aaa]
- Various fixes to ieee802154 code
- Various fixes to HCI UART code
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
tcf_chain_get() always creates a new filter chain if not found
in existing ones. This is totally unnecessary when we get or
delete filters, new chain should be only created for new filters
(or new actions).
Fixes: 5bc1701881 ("net: sched: introduce multichain support for filters")
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for dissection of tcp flags. Uses similar function call to
tcp dissection function as arp, mpls and others.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some TC offloads fixes from Or Gerlitz.
From Erez, mlx5 IPoIB RX fix to improve GRO.
From Mohamad, Command interface fix to improve mitigation against FW
commands timeouts.
From Tariq, Driver load Tolerance against affinity settings failures.
Thanks,
Saeed.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJZJD6WAAoJEEg/ir3gV/o+EJkH+gN9G9jXCkYEkuy0eADCRRMY
Zs1wkJory1whkMyLScA8xO13IpSZ8AmZCp53hPi+Ak17JQrQ26D9MlzkR3WelWL4
4ABZBRDapKdFNsY2SSnGWb7U1INqCmamHF9hOIcezk6rPxKdx9RQ2pkShM5fObKL
vSi+ptrUd5KuMWjikKr/P0v8BfFGYhDTcS5ToNFcITDrbs9srXRjMzgM0MFtvWit
9chXJVpudJdb9vlHjYrlY1nuJopfXyJxtvfBZqjQmviA/+LT0qJ81qkBEjaEyjxk
10Nc6eYfuZKIiDav3AC69xuSTPk73dxrrhOEBpPdqaq6sEOFl8NjpidETYVBnwQ=
=GMLr
-----END PGP SIGNATURE-----
Merge tag 'mlx5-fixes-2017-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-fixes-2017-05-23
Some TC offloads fixes from Or Gerlitz.
From Erez, mlx5 IPoIB RX fix to improve GRO.
From Mohamad, Command interface fix to improve mitigation against FW
commands timeouts.
From Tariq, Driver load Tolerance against affinity settings failures.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This field is sizeof of corresponding kmem_cache so it can't be negative.
Space will be saved after 32-bit kmem_cache_create() patch.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This field is sizeof of corresponding kmem_cache so it can't be negative.
Prepare for 32-bit kmem_cache_create().
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert says:
====================
pull request (net): ipsec 2017-05-23
1) Fix wrong header offset for esp4 udpencap packets.
2) Fix a stack access out of bounds when creating a bundle
with sub policies. From Sabrina Dubroca.
3) Fix slab-out-of-bounds in pfkey due to an incorrect
sadb_x_sec_len calculation.
4) We checked the wrong feature flags when taking down
an interface with IPsec offload enabled.
Fix from Ilan Tayari.
5) Copy the anti replay sequence numbers when doing a state
migration, otherwise we get out of sync with the sequence
numbers. Fix from Antony Antony.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the accessors for realizing if this is a csum action,
and for which fields checksum is needed.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Paul Blakey <paulb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
The DSA notifier events and info structure definitions are not meant for
DSA drivers and users, but only used internally by the DSA core files.
Move them from the public net/dsa.h file to the private dsa_priv.h file.
Also use this opportunity to turn the events into an anonymous enum,
because we don't care about the values, and this will prevent future
conflicts when adding (and sorting) new events.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
The following patchset contains Netfilter/IPVS fixes for your net tree,
they are:
1) When using IPVS in direct-routing mode, normal traffic from the LVS
host to a back-end server is sometimes incorrectly NATed on the way
back into the LVS host. Patch to fix this from Julian Anastasov.
2) Calm down clang compilation warning in ctnetlink due to type
mismatch, from Matthias Kaehlcke.
3) Do not re-setup NAT for conntracks that are already confirmed, this
is fixing a problem that was introduced in the previous nf-next batch.
Patch from Liping Zhang.
4) Do not allow conntrack helper removal from userspace cthelper
infrastructure if already in used. This comes with an initial patch
to introduce nf_conntrack_helper_put() that is required by this fix.
From Liping Zhang.
5) Zero the pad when copying data to userspace, otherwise iptables fails
to remove rules. This is a follow up on the patchset that sorts out
the internal match/target structure pointer leak to userspace. Patch
from the same author, Willem de Bruijn. This also comes with a build
failure when CONFIG_COMPAT is not on, coming in the last patch of
this series.
6) SYNPROXY crashes with conntrack entries that are created via
ctnetlink, more specifically via conntrackd state sync. Patch from
Eric Leblond.
7) RCU safe iteration on set element dumping in nf_tables, from
Liping Zhang.
8) Missing sanitization of immediate date for the bitwise and cmp
expressions in nf_tables.
9) Refcounting logic for chain and objects from set elements does not
integrate into the nf_tables 2-phase commit protocol.
10) Missing sanitization of target verdict in ebtables arpreply target,
from Gao Feng.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When joining a mesh network it is not guaranteed that userspace has a
daemon listening for radar events. This is however required for channels
requiring DFS. To flag that userspace will handle radar events, it needs
to set NL80211_ATTR_HANDLE_DFS.
This matches the current mechanism used for IBSS mode.
Signed-off-by: Benjamin Berg <benjamin@sipsolutions.net>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Now that the DSA public header includes switchdev.h, use the provided
switchdev_obj_dump_cb_t typedef for the object dump callback.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
DSA drivers and core use switchdev. Include switchdev.h only once, in
the dsa.h public header, so that inclusion in DSA drivers or forward
declarations of switchdev structures in not necessary anymore.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The function x25_init is not properly unregister related resources
on error handler.It is will result in kernel oops if x25_init init
failed, so add properly unregister call on error handler.
Also, i adjust the coding style and make x25_register_sysctl properly
return failure.
Signed-off-by: linzhang <xiaolou4617@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the LE Set Default PHY command is supported, the indicate to the
controller that the host has no preferences for transmitter PHY or
receiver PHY selection.
Issuing this command gives the controller a clear indication that other
PHY can be selected if available.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If the Channel Selection Algorithm #2 feature is supported, then enable
the new LE Channel Selection Algorithm event.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
TCP Timestamps option is defined in RFC 7323
Traditionally on linux, it has been tied to the internal
'jiffies' variable, because it had been a cheap and good enough
generator.
For TCP flows on the Internet, 1 ms resolution would be much better
than 4ms or 10ms (HZ=250 or HZ=100 respectively)
For TCP flows in the DC, Google has used usec resolution for more
than two years with great success [1]
Receive size autotuning (DRS) is indeed more precise and converges
faster to optimal window size.
This patch converts tp->tcp_mstamp to a plain u64 value storing
a 1 usec TCP clock.
This choice will allow us to upstream the 1 usec TS option as
discussed in IETF 97.
[1] https://www.ietf.org/proceedings/97/slides/slides-97-tcpm-tcp-options-for-low-latency-00.pdf
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use tcp_jiffies32 instead of tcp_time_stamp, since
tcp_time_stamp will soon be only used for TCP TS option.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use tcp_jiffies32 instead of tcp_time_stamp to feed
tp->lsndtime.
tcp_time_stamp will soon be a litle bit more expensive
than simply reading 'jiffies'.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We abuse tcp_time_stamp for two different cases :
1) base to generate TCP Timestamp options (RFC 7323)
2) A 32bit version of jiffies since some TCP fields
are 32bit wide to save memory.
Since we want in the future to have 1ms TCP TS clock,
regardless of HZ value, we want to cleanup things.
tcp_jiffies32 is the truncated jiffies value,
which will be used only in places where we want a 'host'
timestamp.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce new type of termination action called "goto_chain". This allows
user to specify a chain to be processed. This action type is
then processed as a return value in tcf_classify loop in similar
way as "reclassify" is, only it does not reset to the first filter
in chain but rather reset to the first filter of the desired chain.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tp pointer will be needed by the next patch in order to get the chain.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of having only one filter per block, introduce a list of chains
for every block. Create chain 0 by default. UAPI is extended so the user
can specify which chain he wants to change. If the new attribute is not
specified, chain 0 is used. That allows to maintain backward
compatibility. If chain does not exist and user wants to manipulate with
it, new chain is created with specified index. Also, when last filter is
removed from the chain, the chain is destroyed.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce struct tcf_chain object and set of helpers around it. Wraps up
insertion, deletion and search in the filter chain.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, the filter chains are direcly put into the private structures
of qdiscs. In order to be able to have multiple chains per qdisc and to
allow filter chains sharing among qdiscs, there is a need for common
object that would hold the chains. This introduces such object and calls
it "tcf_block".
Helpers to get and put the blocks are provided to be called from
individual qdisc code. Also, the original filter_list pointers are left
in qdisc privs to allow the entry into tcf_block processing without any
added overhead of possible multiple pointer dereference on fast path.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move tc_classify function to cls_api.c where it belongs, rename it to
fit the namespace.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With more tag protocols being added, regain some order by sorting the
entries in various places.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A dsa_switch_tree instance holds a dsa_switch pointer and a port index
to identify the switch port to which the CPU is attached.
Now that the DSA layer has a dsa_port structure to hold this data, use
it to point the switch CPU port.
This patch simply substitutes s/dst->cpu_switch/dst->cpu_dp->ds/ and
s/dst->cpu_port/dst->cpu_dp->index/.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
CoDel can be too aggressive if a station sends at a very low rate,
leading reduced throughput. This gets worse the more stations are
present, as each station gets more bursty the longer the round-robin
scheduling between stations takes.
This adds dynamic adjustment of CoDel parameters per station. It uses
the rate selection information to estimate throughput and sets more
lenient CoDel parameters if the estimated throughput is below a
threshold (modified by the number of active stations).
A new callback is added that drivers can use to notify mac80211 about
changes in expected throughput, so the same adjustment can be made for
cards that implement rate control in firmware. Drivers that don't use
this will just get the default parameters.
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
[remove currently unnecessary EXPORT_SYMBOL, fix kernel-doc, remove
inline annotation]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
BBR congestion control depends on pacing, and pacing is
currently handled by sch_fq packet scheduler for performance reasons,
and also because implemening pacing with FQ was convenient to truly
avoid bursts.
However there are many cases where this packet scheduler constraint
is not practical.
- Many linux hosts are not focusing on handling thousands of TCP
flows in the most efficient way.
- Some routers use fq_codel or other AQM, but still would like
to use BBR for the few TCP flows they initiate/terminate.
This patch implements an automatic fallback to internal pacing.
Pacing is requested either by BBR or use of SO_MAX_PACING_RATE option.
If sch_fq happens to be in the egress path, pacing is delegated to
the qdisc, otherwise pacing is done by TCP itself.
One advantage of pacing from TCP stack is to get more precise rtt
estimations, and less work done from TX completion, since TCP Small
queue limits are not generally hit. Setups with single TX queue but
many cpus might even benefit from this.
Note that unlike sch_fq, we do not take into account header sizes.
Taking care of these headers would add additional complexity for
no practical differences in behavior.
Some performance numbers using 800 TCP_STREAM flows rate limited to
~48 Mbit per second on 40Gbit NIC.
If MQ+pfifo_fast is used on the NIC :
$ sar -n DEV 1 5 | grep eth
14:48:44 eth0 725743.00 2932134.00 46776.76 4335184.68 0.00 0.00 1.00
14:48:45 eth0 725349.00 2932112.00 46751.86 4335158.90 0.00 0.00 0.00
14:48:46 eth0 725101.00 2931153.00 46735.07 4333748.63 0.00 0.00 0.00
14:48:47 eth0 725099.00 2931161.00 46735.11 4333760.44 0.00 0.00 1.00
14:48:48 eth0 725160.00 2931731.00 46738.88 4334606.07 0.00 0.00 0.00
Average: eth0 725290.40 2931658.20 46747.54 4334491.74 0.00 0.00 0.40
$ vmstat 1 5
procs -----------memory---------- ---swap-- -----io---- -system-- ------cpu-----
r b swpd free buff cache si so bi bo in cs us sy id wa st
4 0 0 259825920 45644 2708324 0 0 21 2 247 98 0 0 100 0 0
4 0 0 259823744 45644 2708356 0 0 0 0 2400825 159843 0 19 81 0 0
0 0 0 259824208 45644 2708072 0 0 0 0 2407351 159929 0 19 81 0 0
1 0 0 259824592 45644 2708128 0 0 0 0 2405183 160386 0 19 80 0 0
1 0 0 259824272 45644 2707868 0 0 0 32 2396361 158037 0 19 81 0 0
Now use MQ+FQ :
lpaa23:~# echo fq >/proc/sys/net/core/default_qdisc
lpaa23:~# tc qdisc replace dev eth0 root mq
$ sar -n DEV 1 5 | grep eth
14:49:57 eth0 678614.00 2727930.00 43739.13 4033279.14 0.00 0.00 0.00
14:49:58 eth0 677620.00 2723971.00 43674.69 4027429.62 0.00 0.00 1.00
14:49:59 eth0 676396.00 2719050.00 43596.83 4020125.02 0.00 0.00 0.00
14:50:00 eth0 675197.00 2714173.00 43518.62 4012938.90 0.00 0.00 1.00
14:50:01 eth0 676388.00 2719063.00 43595.47 4020171.64 0.00 0.00 0.00
Average: eth0 676843.00 2720837.40 43624.95 4022788.86 0.00 0.00 0.40
$ vmstat 1 5
procs -----------memory---------- ---swap-- -----io---- -system-- ------cpu-----
r b swpd free buff cache si so bi bo in cs us sy id wa st
2 0 0 259832240 46008 2710912 0 0 21 2 223 192 0 1 99 0 0
1 0 0 259832896 46008 2710744 0 0 0 0 1702206 198078 0 17 82 0 0
0 0 0 259830272 46008 2710596 0 0 0 0 1696340 197756 1 17 83 0 0
4 0 0 259829168 46024 2710584 0 0 16 0 1688472 197158 1 17 82 0 0
3 0 0 259830224 46024 2710408 0 0 0 0 1692450 197212 0 18 82 0 0
As expected, number of interrupts per second is very different.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Van Jacobson <vanj@google.com>
Cc: Jerry Chu <hkchu@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
under udp flood the sk_receive_queue spinlock is heavily contended.
This patch try to reduce the contention on such lock adding a
second receive queue to the udp sockets; recvmsg() looks first
in such queue and, only if empty, tries to fetch the data from
sk_receive_queue. The latter is spliced into the newly added
queue every time the receive path has to acquire the
sk_receive_queue lock.
The accounting of forward allocated memory is still protected with
the sk_receive_queue lock, so udp_rmem_release() needs to acquire
both locks when the forward deficit is flushed.
On specific scenarios we can end up acquiring and releasing the
sk_receive_queue lock multiple times; that will be covered by
the next patch
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
And update __sk_queue_drop_skb() to work on the specified queue.
This will help the udp protocol to use an additional private
rx queue in a later patch.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andreas reports that the following incremental update using our commit
protocol doesn't work.
# nft -f incremental-update.nft
delete element ip filter client_to_any { 10.180.86.22 : goto CIn_1 }
delete chain ip filter CIn_1
... Error: Could not process rule: Device or resource busy
The existing code is not well-integrated into the commit phase protocol,
since element deletions do not result in refcount decrement from the
preparation phase. This results in bogus EBUSY errors like the one
above.
Two new functions come with this patch:
* nft_set_elem_activate() function is used from the abort path, to
restore the set element refcounting on objects that occurred from
the preparation phase.
* nft_set_elem_deactivate() that is called from nft_del_setelem() to
decrement set element refcounting on objects from the preparation
phase in the commit protocol.
The nft_data_uninit() has been renamed to nft_data_release() since this
function does not uninitialize any data store in the data register,
instead just releases the references to objects. Moreover, a new
function nft_data_hold() has been introduced to be used from
nft_set_elem_activate().
Reported-by: Andreas Schultz <aschultz@tpip.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
We can still delete the ct helper even if it is in use, this will cause
a use-after-free error. In more detail, I mean:
# nfct helper add ssdp inet udp
# iptables -t raw -A OUTPUT -p udp -j CT --helper ssdp
# nfct helper delete ssdp //--> oops, succeed!
BUG: unable to handle kernel paging request at 000026ca
IP: 0x26ca
[...]
Call Trace:
? ipv4_helper+0x62/0x80 [nf_conntrack_ipv4]
nf_hook_slow+0x21/0xb0
ip_output+0xe9/0x100
? ip_fragment.constprop.54+0xc0/0xc0
ip_local_out+0x33/0x40
ip_send_skb+0x16/0x80
udp_send_skb+0x84/0x240
udp_sendmsg+0x35d/0xa50
So add reference count to fix this issue, if ct helper is used by
others, reject the delete request.
Apply this patch:
# nfct helper delete ssdp
nfct v1.4.3: netlink error: Device or resource busy
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
And convert module_put invocation to nf_conntrack_helper_put, this is
prepared for the followup patch, which will add a refcnt for cthelper,
so we can reject the deleting request when cthelper is in use.
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pull RCU updates from Ingo Molnar:
"The main changes are:
- Debloat RCU headers
- Parallelize SRCU callback handling (plus overlapping patches)
- Improve the performance of Tree SRCU on a CPU-hotplug stress test
- Documentation updates
- Miscellaneous fixes"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (74 commits)
rcu: Open-code the rcu_cblist_n_lazy_cbs() function
rcu: Open-code the rcu_cblist_n_cbs() function
rcu: Open-code the rcu_cblist_empty() function
rcu: Separately compile large rcu_segcblist functions
srcu: Debloat the <linux/rcu_segcblist.h> header
srcu: Adjust default auto-expediting holdoff
srcu: Specify auto-expedite holdoff time
srcu: Expedite first synchronize_srcu() when idle
srcu: Expedited grace periods with reduced memory contention
srcu: Make rcutorture writer stalls print SRCU GP state
srcu: Exact tracking of srcu_data structures containing callbacks
srcu: Make SRCU be built by default
srcu: Fix Kconfig botch when SRCU not selected
rcu: Make non-preemptive schedule be Tasks RCU quiescent state
srcu: Expedite srcu_schedule_cbs_snp() callback invocation
srcu: Parallelize callback handling
kvm: Move srcu_struct fields to end of struct kvm
rcu: Fix typo in PER_RCU_NODE_PERIOD header comment
rcu: Use true/false in assignment to bool
rcu: Use bool value directly
...
This reverts commit 82486aa6f1.
As implemented, this causes dangling netdevice refs.
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For each netns (except init_net), we initialize its null entry
in 3 places:
1) The template itself, as we use kmemdup()
2) Code around dst_init_metrics() in ip6_route_net_init()
3) ip6_route_dev_notify(), which is supposed to initialize it after
loopback registers
Unfortunately the last one still happens in a wrong order because
we expect to initialize net->ipv6.ip6_null_entry->rt6i_idev to
net->loopback_dev's idev, thus we have to do that after we add
idev to loopback. However, this notifier has priority == 0 same as
ipv6_dev_notf, and ipv6_dev_notf is registered after
ip6_route_dev_notifier so it is called actually after
ip6_route_dev_notifier. This is similar to commit 2f460933f5
("ipv6: initialize route null entry in addrconf_init()") which
fixes init_net.
Fix it by picking a smaller priority for ip6_route_dev_notifier.
Also, we have to release the refcnt accordingly when unregistering
loopback_dev because device exit functions are called before subsys
exit functions.
Acked-by: David Ahern <dsahern@gmail.com>
Tested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* don't try to authenticate during reconfiguration, which causes
drivers to get confused
* fix a kernel-doc warning for a recently merged change
* fix MU-MIMO group configuration (relevant only for monitor mode)
* more rate flags fix: remove stray RX_ENC_FLAG_40MHZ
* fix IBSS probe response allocation size
-----BEGIN PGP SIGNATURE-----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=FcxE
-----END PGP SIGNATURE-----
Merge tag 'mac80211-for-davem-2017-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
A couple more fixes:
* don't try to authenticate during reconfiguration, which causes
drivers to get confused
* fix a kernel-doc warning for a recently merged change
* fix MU-MIMO group configuration (relevant only for monitor mode)
* more rate flags fix: remove stray RX_ENC_FLAG_40MHZ
* fix IBSS probe response allocation size
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Congestion control modules that want full control over congestion
control behavior do not want the cwnd modifications controlled by
the sysctl_tcp_slow_start_after_idle code path.
So skip those code paths for CC modules that use the cong_control()
API.
As an example, those cwnd effects are not desired for the BBR congestion
control algorithm.
Fixes: c0402760f5 ("tcp: new CC hook to set sending rate with rate_sample in any CA state")
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
IPv4 dst could use fi->fib_metrics to store metrics but fib_info
itself is refcnt'ed, so without taking a refcnt fi and
fi->fib_metrics could be freed while dst metrics still points to
it. This triggers use-after-free as reported by Andrey twice.
This patch reverts commit 2860583fe8 ("ipv4: Kill rt->fi") to
restore this reference counting. It is a quick fix for -net and
-stable, for -net-next, as Eric suggested, we can consider doing
reference counting for metrics itself instead of relying on fib_info.
IPv6 is very different, it copies or steals the metrics from mx6_config
in fib6_commit_metrics() so probably doesn't need a refcnt.
Decnet has already done the refcnt'ing, see dn_fib_semantic_match().
Fixes: 2860583fe8 ("ipv4: Kill rt->fi")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace @results_wk with @report_results, which was missed
in an earlier patch between revisions thereof.
Fixes: b34939b983 ("cfg80211: add request id to cfg80211_sched_scan_*() api")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Somehow I missed this in my RX rate cleanup series, causing some
drivers to not report correct bandwidth since this flag isn't
used by mac80211 anymore. Fix this, and make hwsim also report
higher bandwidths appropriately.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Whole point of randomization was to hide server uptime, but an attacker
can simply start a syn flood and TCP generates 'old style' timestamps,
directly revealing server jiffies value.
Also, TSval sent by the server to a particular remote address vary
depending on syncookies being sent or not, potentially triggering PAWS
drops for innocent clients.
Lets implement proper randomization, including for SYNcookies.
Also we do not need to export sysctl_tcp_timestamps, since it is not
used from a module.
In v2, I added Florian feedback and contribution, adding tsoff to
tcp_get_cookie_sock().
v3 removed one unused variable in tcp_v4_connect() as Florian spotted.
Fixes: 95a22caee3 ("tcp: randomize tcp timestamp offsets for each connection")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Tested-by: Florian Westphal <fw@strlen.de>
Cc: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
1) The wireless rate info fix from Johannes Berg.
2) When a RAW socket is in hdrincl mode, we need to make sure that the
user provided at least a minimally sized ipv4/ipv6 header. Fix from
Alexander Potapenko.
3) We must emit IFLA_PHYS_PORT_NAME netlink attributes using
nla_put_string() so that it is NULL terminated.
4) Fix a bug in TCP fastopen handling, wherein child sockets
erroneously inherit the fastopen_req from the parent, and later can
end up derefencing freed memory or doing a double free. From Eric
Dumazet.
5) Don't clear out netdev stats at close time in tg3 driver, from
YueHaibing.
6) Fix refcount leak in xt_CT, from Gao Feng.
7) In nft_set_bitmap() don't leak dummy elements, from Liping Zhang.
8) Fix deadlock due to taking the expectation lock twice, also from
Liping Zhang.
9) Make xt_socket work again with ipv6, from Peter Tirsek.
10) Don't allow IPV6 to be used with IPVS if ipv6.disable=1, from Paolo
Abeni.
11) Make the BPF loader more flexible wrt. changes to the bpf MAP entry
layout. From Jesper Dangaard Brouer.
12) Fix ethtool reported device name in aquantia driver, from Pavel
Belous.
13) Fix build failures due to the compile time size test not working in
netfilter conntrack. From Geert Uytterhoeven.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (52 commits)
cfg80211: make RATE_INFO_BW_20 the default
ipv6: initialize route null entry in addrconf_init()
qede: Fix possible misconfiguration of advertised autoneg value.
qed: Fix overriding of supported autoneg value.
qed*: Fix possible overflow for status block id field.
rtnetlink: NUL-terminate IFLA_PHYS_PORT_NAME string
netvsc: make sure napi enabled before vmbus_open
aquantia: Fix driver name reported by ethtool
ipv4, ipv6: ensure raw socket message is big enough to hold an IP header
net/sched: remove redundant null check on head
tcp: do not inherit fastopen_req from parent
forcedeth: remove unnecessary carrier status check
ibmvnic: Move queue restarting in ibmvnic_tx_complete
ibmvnic: Record SKB RX queue during poll
ibmvnic: Continue skb processing after skb completion error
ibmvnic: Check for driver reset first in ibmvnic_xmit
ibmvnic: Wait for any pending scrqs entries at driver close
ibmvnic: Clean up tx pools when closing
ibmvnic: Whitespace correction in release_rx_pools
ibmvnic: Delete napi's when releasing driver resources
...
Due to the way I did the RX bitrate conversions in mac80211 with
spatch, going setting flags to setting the value, many drivers now
don't set the bandwidth value for 20 MHz, since with the flags it
wasn't necessary to (there was no 20 MHz flag, only the others.)
Rather than go through and try to fix up all the drivers, instead
renumber the enum so that 20 MHz, which is the typical bandwidth,
actually has the value 0, making those drivers all work again.
If VHT was hit used with a driver not reporting it, e.g. iwlmvm,
this manifested in hitting the bandwidth warning in
cfg80211_calculate_bitrate_vht().
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Tested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrey reported a crash on init_net.ipv6.ip6_null_entry->rt6i_idev
since it is always NULL.
This is clearly wrong, we have code to initialize it to loopback_dev,
unfortunately the order is still not correct.
loopback_dev is registered very early during boot, we lose a chance
to re-initialize it in notifier. addrconf_init() is called after
ip6_route_init(), which means we have no chance to correct it.
Fix it by moving this initialization explicitly after
ipv6_add_dev(init_net.loopback_dev) in addrconf_init().
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When CONFIG_XFRM_SUB_POLICY=y, xfrm_dst stores a copy of the flowi for
that dst. Unfortunately, the code that allocates and fills this copy
doesn't care about what type of flowi (flowi, flowi4, flowi6) gets
passed. In multiple code paths (from raw_sendmsg, from TCP when
replying to a FIN, in vxlan, geneve, and gre), the flowi that gets
passed to xfrm is actually an on-stack flowi4, so we end up reading
stuff from the stack past the end of the flowi4 struct.
Since xfrm_dst->origin isn't used anywhere following commit
ca116922af ("xfrm: Eliminate "fl" and "pol" args to
xfrm_bundle_ok()."), just get rid of it. xfrm_dst->partner isn't used
either, so get rid of that too.
Fixes: 9d6ec93801 ("ipv4: Use flowi4 in public route lookup interfaces.")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
- idr usage and locking changes
- build fix for hns
- ipoib debug path record file fix
- hfi1 updates
- core RDMA netdev addition
- Intel VNIC driver addition
- Enhanced accelerators for IPoIB addition
- Debug cleanups in cxgb3/4
- Trivial cleanups from SF Markus Elfring
- Misc rxe fixes from Mellanox
- Misc ipoib fixes from Mellanox
- Lots of mlx4/mlx5 changes from Mellanox
- Misc fixes across the RDMA subsystem
- ODP paging fixes and improvements
- qedr updates
- hfi1 updates
- OPA port info patches
- OPA AH patches
- OPA SA Query patches
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJZCfBsAAoJELgmozMOVy/d9GsP/je5/IyEwQOFVxhLM+BooDWy
wfH/GWLoT4iSxviWtBzukZzrioxjfyFitZzkTWYxHMj3EIb63i52pDUTpes/soGl
c3ob0SYv5mPB9b1mBZaIyyTWBWrXfm2pNSfyYryhI1cYxNX5ZLlXG51Xd3YxdB3D
A8avUsCtH17zSb6Mimm04cT47pn5UIkVkcPKZDCir10hj1JiwLVwrWyC7abxLENp
jHFw4uKQHOV3IN6jevM/tXfUenjALXwBHHKv+lJsBVijDUPTEmDsBiDXsvO++dmN
Ph5ElY3KPfUmj4wIWIrY4L56j5Kr13Wxc+U8+MWNC6frbcHYoMCaSz3yaU15NLAd
UYY5blzZsuNXqhgmudeV89qJpXYleW7KCgJQNiBmLkcQL38+ObdLTP0EmsC02K+W
YpJbwecjNQtcb3KTJGnKCyMc3+Rs0u6Osz6YKuad4l8cNaxUI8NVujB2ru/wBczg
fqXEunXjr6tEVM39zqwolImicsSSEzBKfpaFvB3D2Re5O22Eos6DM+DveUnzXAFR
Hof5NhPURr/1aqNog2ymgGbjlg3tL4JAAG1PRBhvSFYywVMjV/LLBPQOgqaQzIU5
J72jbSikRJYLCJaLFAeM7nNsTQgAMH58G0vhnrFoAjC7MglYaedcvouLjOs1jrpW
d5f12NtIBIpC6DvQCNvH
=pgEL
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma updates from Doug Ledford:
"More exchaustive description of primary updates in this release:
- Lots of driver fixes and misc fixes across the board.
- I had to base on a net-next tree because the IPoIB Accelorator
patches needed it.
Unfortunately, it was known to Mellanox that there would need to be
an IPoIB accelorator patch to the net tree (which left some
functions turned off by an #ifdef construct to avoid warnings about
defined but unused functions), then one to the RDMA tree, then a
fixup that went back and re-enabled the functions in the net tree
and enabled their use in the rdma tree
Also, a sparse fix was sent to the net tree after I did my pull,
and the fixup patch conflicts quite directly with that sparse fix,
so I'm going to submit the fixup patch towards the end of the merge
window by itself and based upon your master branch at the time.
- Two separate rounds of hfi1 fixes, one that got dropped from last
release because it came in just a day or two before the end of the
merge window and then the one from this release cycle.
Of note is that I now have a third series that just landed from
Intel yesterday. It is not included in this pull request, but I may
submit it by the end of the week. I'll talk to Intel about
improving the timing of thier submissions for my workflow.
- Changes to our idr usage in the RDMA subsystem that will tie into
our cgroup management and also into the upcoming changes for the
RDMA kernel<->userspace API.
- Addition of support for a netdev to be tied to an RDMA device at
the core level
- Addition of the VNIC driver from Intel.
While IPoIB provides IP over InfiniBand (and *only* IP, no lower
layer protocol headers are allowed or supported), the VNIC driver
presents a virtual Ethernet device with support for things like
varying Ethertypes, VLANs, priorities and other features of
Ethernet.
The virtual devices are centrally managed by the OPA fabric
manager, making this (for the time being) a strictly OPA specific
feature.
- Improvements to the On-Demand Paging support in the RDMA subsystem.
- Addition of three significant OPA changes.
While we added OPA support some time ago (via the hfi1 driver), the
RDMA subsystem has so far glossed over the areas where OPA and
InfiniBand differ.
With this release we are starting to add support for the OPA
extensions into the RDMA core in the following area: Extended port
information for OPA is now supported, extended Address Handle
attributes for OPA are now supported, and extended SA Queries to
get OPA specific subnet information is now supported.
Concise summary from the tag:
- idr usage and locking changes
- build fix for hns
- ipoib debug path record file fix
- hfi1 updates
- core RDMA netdev addition
- Intel VNIC driver addition
- Enhanced accelerators for IPoIB addition
- Debug cleanups in cxgb3/4
- Trivial cleanups from SF Markus Elfring
- Misc rxe fixes from Mellanox
- Misc ipoib fixes from Mellanox
- Lots of mlx4/mlx5 changes from Mellanox
- Misc fixes across the RDMA subsystem
- ODP paging fixes and improvements
- qedr updates
- hfi1 updates
- OPA port info patches
- OPA AH patches
- OPA SA Query patches"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (191 commits)
infiniband: avoid dereferencing uninitialized dst on error path
IB/SA: Add OPA addr header
IB/mlx5: Add port_xmit_wait to counter registers read
IB/ocrdma: fix out of bounds access to local buffer
IB/mlx4: Fix incorrect order of formal and actual parameters
IB/mlx4: Change flush logic so it adheres to the variable name
mlx5: Fix mlx5_ib_map_mr_sg mr length
IB/rxe: Don't clamp residual length to mtu
IB/SA: Add support to query OPA path records
IB/SA: Add OPA path record type
IB/SA: Split struct sa_path_rec based on IB and ROCE specific fields
IB/SA: Introduce path record specific types
IB/SA: Rename ib_sa_path_rec to sa_path_rec
IB/CM: Add braces when using sizeof
IB/core: Define 'opa' rdma_ah_attr type
IB/core: Define 'ib' and 'roce' rdma_ah_attr types
IB/core: Use rdma_ah_attr accessor functions
IB/core: Add accessor functions for rdma_ah_attr fields
IB/PVRDMA: Rename ib_ah_attr related functions
IB/mthca: Rename to_ib_ah_attr to to_rdma_ah_attr
...
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following patchset contains Netfilter updates for your net-next
tree. A large bunch of code cleanups, simplify the conntrack extension
codebase, get rid of the fake conntrack object, speed up netns by
selective synchronize_net() calls. More specifically, they are:
1) Check for ct->status bit instead of using nfct_nat() from IPVS and
Netfilter codebase, patch from Florian Westphal.
2) Use kcalloc() wherever possible in the IPVS code, from Varsha Rao.
3) Simplify FTP IPVS helper module registration path, from Arushi Singhal.
4) Introduce nft_is_base_chain() helper function.
5) Enforce expectation limit from userspace conntrack helper,
from Gao Feng.
6) Add nf_ct_remove_expect() helper function, from Gao Feng.
7) NAT mangle helper function return boolean, from Gao Feng.
8) ctnetlink_alloc_expect() should only work for conntrack with
helpers, from Gao Feng.
9) Add nfnl_msg_type() helper function to nfnetlink to build the
netlink message type.
10) Get rid of unnecessary cast on void, from simran singhal.
11) Use seq_puts()/seq_putc() instead of seq_printf() where possible,
also from simran singhal.
12) Use list_prev_entry() from nf_tables, from simran signhal.
13) Remove unnecessary & on pointer function in the Netfilter and IPVS
code.
14) Remove obsolete comment on set of rules per CPU in ip6_tables,
no longer true. From Arushi Singhal.
15) Remove duplicated nf_conntrack_l4proto_udplite4, from Gao Feng.
16) Remove unnecessary nested rcu_read_lock() in
__nf_nat_decode_session(). Code running from hooks are already
guaranteed to run under RCU read side.
17) Remove deadcode in nf_tables_getobj(), from Aaron Conole.
18) Remove double assignment in nf_ct_l4proto_pernet_unregister_one(),
also from Aaron.
19) Get rid of unsed __ip_set_get_netlink(), from Aaron Conole.
20) Don't propagate NF_DROP error to userspace via ctnetlink in
__nf_nat_alloc_null_binding() function, from Gao Feng.
21) Revisit nf_ct_deliver_cached_events() to remove unnecessary checks,
from Gao Feng.
22) Kill the fake untracked conntrack objects, use ctinfo instead to
annotate a conntrack object is untracked, from Florian Westphal.
23) Remove nf_ct_is_untracked(), now obsolete since we have no
conntrack template anymore, from Florian.
24) Add event mask support to nft_ct, also from Florian.
25) Move nf_conn_help structure to
include/net/netfilter/nf_conntrack_helper.h.
26) Add a fixed 32 bytes scratchpad area for conntrack helpers.
Thus, we don't deal with variable conntrack extensions anymore.
Make sure userspace conntrack helper doesn't go over that size.
Remove variable size ct extension infrastructure now this code
got no more clients. From Florian Westphal.
27) Restore offset and length of nf_ct_ext structure to 8 bytes now
that wraparound is not possible any longer, also from Florian.
28) Allow to get rid of unassured flows under stress in conntrack,
this applies to DCCP, SCTP and TCP protocols, from Florian.
29) Shrink size of nf_conntrack_ecache structure, from Florian.
30) Use TCP_MAX_WSCALE instead of hardcoded 14 in TCP tracker,
from Gao Feng.
31) Register SYNPROXY hooks on demand, from Florian Westphal.
32) Use pernet hook whenever possible, instead of global hook
registration, from Florian Westphal.
33) Pass hook structure to ebt_register_table() to consolidate some
infrastructure code, from Florian Westphal.
34) Use consume_skb() and return NF_STOLEN, instead of NF_DROP in the
SYNPROXY code, to make sure device stats are not fooled, patch
from Gao Feng.
35) Remove NF_CT_EXT_F_PREALLOC this kills quite some code that we
don't need anymore if we just select a fixed size instead of
expensive runtime time calculation of this. From Florian.
36) Constify nf_ct_extend_register() and nf_ct_extend_unregister(),
from Florian.
37) Simplify nf_ct_ext_add(), this kills nf_ct_ext_create(), from
Florian.
38) Attach NAT extension on-demand from masquerade and pptp helper
path, from Florian.
39) Get rid of useless ip_vs_set_state_timeout(), from Aaron Conole.
40) Speed up netns by selective calls of synchronize_net(), from
Florian Westphal.
41) Silence stack size warning gcc in 32-bit arch in snmp helper,
from Florian.
42) Inconditionally call nf_ct_ext_destroy(), even if we have no
extensions, to deal with the NF_NAT_MANIP_SRC case. Patch from
Liping Zhang.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
For NF_NAT_MANIP_SRC, we will insert the ct to the nat_bysource_table,
then remove it from the nat_bysource_table via nat_extend->destroy.
But now, the nat extension is attached on demand, so if the nat extension
is not attached, we will not be notified when the ct is destroyed, i.e.
we may fail to remove ct from the nat_bysource_table.
So just keep it simple, even if the extension is not attached, we will
still invoke the related ext->destroy. And this will also preserve the
flexibility for the future extension.
Fixes: 9a08ecfe74 ("netfilter: don't attach a nat extension by default")
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Simon Horman says:
====================
Third Round of IPVS Updates for v4.12
please consider these enhancements to IPVS for v4.12.
If it is too late for v4.12 then please consider them for v4.13.
* Remove unused function
* Correct comparison of unsigned value
====================
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
nf_unregister_net_hook(s) can avoid a second call to synchronize_net,
provided there is no nfqueue active in that net namespace (which is
the common case).
This also gets rid of the extra arg to nf_queue_nf_hook_drop(), normally
this gets called during netns cleanup so no packets should be queued.
For the rare case of base chain being unregistered or module removal
while nfqueue is in use the extra hiccup due to the packet drops isn't
a big deal.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
* API support for concurrent scheduled scan requests
* API changes for roaming reporting
* BSS max idle support in mac80211
* API changes for TX status reporting in mac80211
* API changes for RX rate reporting in mac80211
* rewrite monitor logic to prepare for BPF filters
* bugfix for rare devices without 2.4 GHz support
* a bugfix for recent DFS changes
* some further cleanups
The API changes are actually at a nice time, since it's
typically quiet just before the merge window, and trees
can be synchronized easily during it.
-----BEGIN PGP SIGNATURE-----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=dYTw
-----END PGP SIGNATURE-----
Merge tag 'mac80211-next-for-davem-2017-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
Another set of patches for -next:
* API support for concurrent scheduled scan requests
* API changes for roaming reporting
* BSS max idle support in mac80211
* API changes for TX status reporting in mac80211
* API changes for RX rate reporting in mac80211
* rewrite monitor logic to prepare for BPF filters
* bugfix for rare devices without 2.4 GHz support
* a bugfix for recent DFS changes
* some further cleanups
The API changes are actually at a nice time, since it's
typically quiet just before the merge window, and trees
can be synchronized easily during it.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Arkadi Sharshevsky