It's a bit confusing that page write protect handler is live in
mmio emulation handler. This moves it to stand alone gvt ops.
Also remove unnecessary check of write protected page access
in mmio read handler and cleanup handling of failsafe case.
v2: rebase
Reviewed-by: Xiong Zhang <xiong.y.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
We had previous hack that tried to accept either i915_reg_t or offset
value to access vGPU virtual/shadow regs which broke that purpose to
be type safe in context. This one trys to explicitly separate the usage
of typed mmio reg with real offset.
Old vgpu_vreg(offset) helper is used only for offset now with new
vgpu_vreg_t(reg) is used for i915_reg_t only. Convert left usage
of that to new helper.
Also fixed left KASAN warning issues caused by previous hack.
v2: rebase, fixup against recent mmio switch change
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
observed igt drv_module_reload test case failure on 4.15.0
rc2 kernel with panic due to no active pipe available.
the gpu will reset during unload/load and make pipe config reg
lost which can cause kernel panic issue happen.
this patch is to move pipe enabling to emulate_mointor_status_chagne
to handle vgpu reset case as well.
Fixes: 7e60590208 ("drm/i915/gvt: enabled pipe A default on creating vgpu")
Signed-off-by: Xiaolin Zhang <xiaolin.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
(cherry picked from commit f5f00e7dcc)
Always requires properly defined i915_reg_t type for MMIO handler
definition.
Fix kasan warning of "drivers/gpu/drm/i915/gvt/handlers.c:2397:1: error: the frame size of 32120 bytes is larger than 8192 bytes"
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
We don't need any active planes during load detection, so just disable
them all. This saves us from having to come up with a suitable
framebuffer. And we also avoid leaving sprite/cursor planes on and
potentially presenting them at a peculiar location during the load
detection.
Changes since v1 (Maarten):
- Add missing call to add_all_affected_planes.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102707
Link: https://patchwork.freedesktop.org/patch/msgid/20171220093545.613-4-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Looking at the coordination of resets with the submission of execlists,
it will be useful to have a GEM_TRACE for when we issue the reset.
Whilst there tidy up the other GEM_TRACE to always include the engine
name, and be careful not to trust any pointers prior to asserts.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171220090626.31643-1-chris@chris-wilson.co.uk
Commit 77affa3172 ("drm/i915/psr: Fix compiler warnings for
hsw_psr_disable()") swapped status and control registers while fixing
indentation. The _ctl at the end of the status register name must have to
led to this.
Fixes: 77affa3172 ("drm/i915/psr: Fix compiler warnings for hsw_psr_disable()")
References: https://www.mrc-cbu.cam.ac.uk/people/matt.davis/cmabridge/
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171220043520.2599-1-dhinakaran.pandiyan@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Use the local on-stack struct directly rather than hide it behind a
pointer. This should be both clearer for the reader and the compiler (we
rely on the compiler seeing through the functions to spot uninitialized
uses of the local).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171219130948.6282-1-chris@chris-wilson.co.uk
There seems to be another clock gating issue which the workaround is
described as:
"WA: Set 0xE4F0[1] = 1 to disable Early EOT of thread."
Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171216001117.14232-2-rafael.antognolli@intel.com
We dump modparams in few places (debugfs, gpu_error) using different
functions. Lets add reusable function to avoid code duplication.
add/remove: 1/0 grow/shrink: 0/2 up/down: 1096/-2339 (-1243)
Function old new delta
i915_params_dump - 1096 +1096
i915_capabilities 1353 185 -1168
i915_error_state_to_str 5507 4336 -1171
Total: Before=1285716, After=1284473, chg -0.10%
v2: use forward decl rather than include (Chris)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171219114346.26308-3-michal.wajdeczko@intel.com
Convert intel_device_info_dump into pretty printer to be
consistent with the rest of the driver code.
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171219114346.26308-2-michal.wajdeczko@intel.com
We dump device flags in few places (init_early, debugfs, gpu_error)
using different functions. Lets add reusable function to avoid
code duplication.
add/remove: 1/0 grow/shrink: 0/3 up/down: 1296/-3572 (-2276)
Function old new delta
intel_device_info_dump_flags - 1296 +1296
i915_capabilities 2435 1353 -1082
i915_error_state_to_str 6642 5507 -1135
intel_device_info_dump 1507 152 -1355
Total: Before=1287992, After=1285716, chg -0.18%
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171219114346.26308-1-michal.wajdeczko@intel.com
drivers/gpu/drm/i915/intel_ddi.c:2098 intel_ddi_clk_select() warn: inconsistent indenting
References: 8edcda1266 ("drm/i915: Protect DDI port to DPLL map from theoretical race.")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171219112649.9388-1-chris@chris-wilson.co.uk
After a reset, the state of the CSB registers are scrubbed and not valid
until a powercontext is reloaded. We only know when a powercontext has
been reloaded once we see a CS-interrupt, before then we must ignore the
CSB registers within the execlists_submission_tasklet. However, glk is
sporadically dying with an illegal CSB pointer value (both in the HSWP
and mmio) suggesting that it is running with the CS-interrupt bit set
before the powercontext has been reloaded. Make sure the clearing of
that bit is serialised on reset with the re-enabling of the tasklet.
References: https://bugs.freedesktop.org/show_bug.cgi?id=104262
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171219090110.11153-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
In case we have multiple modesets for different connectors
happening in parallel we could have a race on the RMW on these
shared registers.
This possibility was initially raised by Paulo when reviewing
commit '555e38d27317 ("drm/i915/cnl: DDI - PLL mapping")'
but the original possibility comes from commit '5416d871136d
("drm/i915/skl: Set the eDP link rate on DPLL0")'. Or maybe
later when atomic commits entered into picture.
Apparently the discussion around this topic showed that the
right solution would be on serializing the atomic commits in
a way that we don't have the possibility of races here since
if that parallel modeset happenings apparently many other
things will be on fire.
Code is there since SKL and there was no report of issue,
but since we never looked back to that serialization possibility,
and also we don't have an igt case for that it is better to at
least protect this corner.
Suggested-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Fixes: 555e38d273 ("drm/i915/cnl: DDI - PLL mapping")
Fixes: 5416d87113 ("drm/i915/skl: Set the eDP link rate on DPLL0")
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst maarten.lankhorst@linux.intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Maarten Lankhorst maarten.lankhorst@linux.intel.com
Link: https://patchwork.freedesktop.org/patch/msgid/20171215224310.19103-1-rodrigo.vivi@intel.com
Now that we skip a per-engine reset on an idle engine, we need to update
the selftest to take that into account. In the process, we find that we
were not stressing the per-engine reset very hard, so add those missing
active resets.
v2: Actually test i915_reset_engine() by loading it with requests.
Fixes: f6ba181ada ("drm/i915: Skip an engine reset if it recovered before our preparations")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104313
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171217132852.30642-3-chris@chris-wilson.co.uk
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
When monitoring the GPU with i915 perf, reports are tagged with a hw
id. Gem context creation tracepoints already have a hw_id field,
unfortunately you only get this correlation between a process id and a
hw context id once when the context is created. It doesn't help if you
started monitoring after the process was initialized or if the drm fd
was transfered from one process to another.
This change adds the hw_id field to gem requests, so that correlation
can also be done on submission.
v2: Place hw_id at the end of the tracepoint to not disrupt too much
existing tools (Chris)
v3: Reorder hw_id field again (Chris)
v4: Add missing hw_id to i915_gem_request_wait_begin tracepoint (Chris)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171218151959.14073-3-lionel.g.landwerlin@intel.com
Let's make the order of the fields of the tracepoints involving gem
request match across i915. This makes userspace processing of
tracepoint a bit easier.
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171218151959.14073-2-lionel.g.landwerlin@intel.com
A useful bit of information for inspecting GPU stalls from
intel_engine_dump() are the error registers, IPEIR and IPEHR.
v2: Fixup gen changes in register offsets (Tvrtko)
v3: Old FADDR location as well
v4: Use I915_READ64_2x32
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171218123914.19027-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
We have an existing helper for testing obj->mm.pages, so use it.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171218103855.25274-1-matthew.auld@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Inside i915_gem_reset(), we start touching the HW and so require the
low-level HW to be re-enabled, in particular the PCI BARs.
Fixes: 7b6da818d8 ("drm/i915: Restore the kernel context after a GPU reset on an idle engine")
References: 0db8c96120 ("drm/i915: Re-enable GTT following a device reset")
Testcase: igt/drv_hangman #i915g/i915gm
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171217132852.30642-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Load host render mocs registers once for delta update of mocs switch, it
reduces mmio read times obviously, then brings performance improvement
during multi-vms switch.
Signed-off-by: Weinan Li <weinan.z.li@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Save and restore the mocs regs of one VM in GVT-g burning too much CPU
utilization. Add LRI command scan to monitor the change of mocs registers,
save the state in vreg, and use delta update policy to restore them.
It can obviously reduce the MMIO r/w count, and improve the performance
of context switch.
Signed-off-by: Weinan Li <weinan.z.li@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Now mmio switch between vGPUs need to switch to host first then to expected
vGPU, it waste one time mmio save/restore. r/w mmio usually is
time-consuming, and there are so many mocs registers need to save/restore
during vGPU switch. Combine the switch_to_host and switch_to_vgpu can
reduce 1 time mmio save/restore, it will reduce the CPU utilization and
performance while there is multi VMs with heavy work load.
Signed-off-by: Weinan Li <weinan.z.li@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Refine trace_render_mmio to show the vm id before and after vgpu switch,
tag host id as '0', this patch will be used in the future patch for refine
mocs switch policy.
Signed-off-by: Weinan Li <weinan.z.li@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Instead of trying different seq_puts messages, lets use common
-ENODEV error code to indicate missing/unsupported feature.
v2: don't forget about guc_log_control fops (Sagar)
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171215143635.17884-1-michal.wajdeczko@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
As part of the system requirement for powersaving is that we always have
a context loaded. Upon boot and resume, we load the kernel_context to
ensure that some valid state is set before powersaving kicks in, we
should do so after a full GPU reset as well. We only need to do so for
an idle engine, as any active engines will restart by executing the
stuck request, loading its context. For the idle engine, we create a
new request to load the kernel_context instead.
For whatever reason, perfoming a dummy execute on the idle engine after
reset papers over a subsequent GPU hang in rare circumstances, even on
machines not using contexts (e.g. Pineview).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104259
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104261
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171216000334.8197-1-chris@chris-wilson.co.uk
At the beginning of a reset, we disable the submission method and find
the stuck request. We expect to find a stuck request for we have
declared the engine stalled. However, if we find no active request, the
engine must have recovered from its stall before we could issue a reset,
so let the engine continue on without a reset. If the engine is truly
stuck, we will back soon enough with the next reset attempt.
v2: Remove the stale debug message.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171216002206.31737-1-chris@chris-wilson.co.uk
CFL was missing from intel_early_ids[]. The PCI ID needs to be there to
allow the memory region to be stolen, otherwise we could have RAM being
arbitrarily overwritten if for example we keep using the UEFI framebuffer,
depending on how BIOS has set up the e820 map.
Fixes: b056f8f3d6 ("drm/i915/cfl: Add Coffee Lake PCI IDs for S Skus.")
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Cc: <stable@vger.kernel.org> # v4.13+ 0890540e21 drm/i915: add GT number to intel_device_info
Cc: <stable@vger.kernel.org> # v4.13+ 41693fd523 drm/i915/kbl: Change a KBL pci id to GT2 from GT1.5
Cc: <stable@vger.kernel.org> # v4.13+
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171213200425.2954-1-lucas.demarchi@intel.com
Just printk the string, or at least do not double up on the newlines!
Fixes: eef57324d9 ("drm/i915: setup bridge for HDMI LPE audio driver")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Jerome Anand <jerome.anand@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171213182858.2159-1-chris@chris-wilson.co.uk
Internal objects consistent of scratch pages not subject to the
persistence guarantees of user facing objects. They are used for
example, in ring buffers where they are only required for temporary
storage of commands that will be rewritten every time. As they are
temporary constructs, quietly report -ENOMEM back along the callchain
rather than subject the system to oomkiller if an allocation fails.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171215101753.1519-1-chris@chris-wilson.co.uk
The code has an ifdef and uses two functions to either init the bare
spinlock or init it and set a lock-class. It is possible to do the same
thing without an ifdef.
With this patch (in debug case) we first use the "default" lock class
which is later overwritten to the supplied one. Without lockdep the set
name/class function vanishes.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171214131009.7479-1-joonas.lahtinen@linux.intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Knowing the state of the engine when hangcheck thinks it is stalling is
useful for both debugging hangcheck itself and the potential cause of an
unwanted stall.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171214122613.26134-1-chris@chris-wilson.co.uk
We have the selftest that's checking doorbell create/destroy, so there's
no need to check all doorbells delaying the reset every time.
We do want to have that extra sanity check at module load/unload though.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171213221352.7173-7-michal.winiarski@intel.com
We can now move the clients allocation to submission_init path, rather
than keeping the condition inside submission_enable called on every
reset.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171213221352.7173-6-michal.winiarski@intel.com
Full GPU reset causes GuC to be reset. This means that every time we're
doing a reset, we need to talk to GuC and tell it about doorbells.
Let's separate the communication part (create_doorbell) from our
internal bookkeeping (reserve_doorbell) so that we can cleanly separate
the initialization done at module load from reinitialization done at
reset in the following patch.
While I'm here, let's also add a proper (although slightly asymetric)
cleanup that doesn't try to communicate with GuC after it's already
gone, getting rid of "expected" warnings caused by GuC action failures
on module unload.
Note that I've also removed one of the tests (bitmap out of sync), since
it doesn't make much sense anymore - bitmaps are now not expected to
change during the lifetime of a client.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171213221352.7173-5-michal.winiarski@intel.com
To make this operation a bit cleaner, we should make sure that the HW
can catch up by calling the new implementation right away.
Note that currently we're only touching the vfunc at module load time
(before GuC is even loaded), so this shouldn't cause any functional
changes.
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171213221352.7173-4-michal.winiarski@intel.com
Michal Wajdeczko