Commit Graph

16 Commits

Author SHA1 Message Date
송은봉 847443774b powerpc: : Kill CONFIG_MTD_PARTITIONS
This patch removes CONFIG_MTD_PARTITIONS in config files for powerpc.
 Because CONFIG_MTD_PARTITIONS was removed by commit 6a8a98b22b.

Signed-off-by: Eunbong Song <eunb.song@samsung.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-03-07 15:50:11 +11:00
Scott Wood 34f364fef4 powerpc/fsl: Remove CONFIG_IRQ_ALL_CPUS from mpc85xx/mpc86xx defconfig
While this should be harmless now that distribute_irqs
obeys MPIC_SINGLE_DEST_CPU, there's no reason to enable this
on mpc85xx/mpc86xx since MPIC_SINGLE_DEST_CPU will always be set.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-01-29 11:35:05 +11:00
Martyn Welch 6518bb69f4 gpio: Move GE GPIO driver to reside within GPIO subsystem
The GE GPIO driver provides basic support (set direction, read/write state)
for the GPIO provided on some GE single board computers. This patch moves
the driver from the 86xx specific platform directrory to the GPIO subsystem
so that it can be used on non-86xx boards.

Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-03-16 11:08:08 -05:00
Stephen Rothwell ff56535d29 powerpc: Restore some misc devices to our configs
Uwe Kleine-König reported:

	while working on an defconfig (arm/mx27) I noticed that just updating
	it[1] results in removing CONFIG_EEPROM_AT24=y.  The reason is that
	since commit

		v2.6.36-5965-g5f2365d (misc devices: do not enable by default)

	MISC_DEVICES isn't enabled anymore by default.  So all defconfigs that
	have CONFIG_SOME_SYMBOL=y (or =m) (with SOME_SYMBOL depending on
	MISC_DEVICES) but not CONFIG_MISC_DEVICES=y suffer from the same
	problem.

This restores those misc devices to the powerpc defconfigs.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de
Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: Uwe Kleine-König
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-03-30 10:36:23 +11:00
David Rientjes 6a108a14fa kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERT
The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option
is used to configure any non-standard kernel with a much larger scope than
only small devices.

This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes
references to the option throughout the kernel.  A new CONFIG_EMBEDDED
option is added that automatically selects CONFIG_EXPERT when enabled and
can be used in the future to isolate options that should only be
considered for embedded systems (RISC architectures, SLOB, etc).

Calling the option "EXPERT" more accurately represents its intention: only
expert users who understand the impact of the configuration changes they
are making should enable it.

Reviewed-by: Ingo Molnar <mingo@elte.hu>
Acked-by: David Woodhouse <david.woodhouse@intel.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Greg KH <gregkh@suse.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Robin Holt <holt@sgi.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-20 17:02:05 -08:00
Benjamin Herrenschmidt 61a3e1665f powerpc: Trim defconfigs
This trims all our defconfigs using make savedefconfig

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-08-09 11:19:16 +10:00
Grant Likely 65cf840ff4 powerpc: Disable CONFIG_SYSFS_DEPRECATED
Acked-by: Grant Likely <grant.likely@secretlab.ca>

On 5 May 2010 21:33, "Anton Blanchard" <anton@samba.org> wrote:

CONFIG_SYSFS_DEPRECATED can cause issues with newer distros and should not
be required for any distro in the last 3 or 4 years, so disable it.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-06-15 15:02:33 +10:00
Kumar Gala b4d0a038e0 powerpc: 2.6.34 update of defconfigs for embedded 6xx/7xxx, 8xx, 8xxx
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-04-19 23:17:27 -05:00
Martyn Welch f987d82b80 powerpc/86xx: Enable VME driver on the GE PPC9A
Enable the VME driver (which is currently in staging) on the PPC9A

Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-02-17 21:48:22 -06:00
Kumar Gala 1e65346b3b powerpc: 2.6.33 update of defconfigs for embedded 6xx/7xxx, 8xx, 8xxx
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-01-06 09:27:07 -06:00
Martyn Welch 3bc265627a powerpc/86xx: Support for NVRAM on GE Fanuc's PPC9A
Add support for NVRAM on GE Fanuc's PPC9A.

Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-11-20 16:45:37 -06:00
Kumar Gala e9bcf1418c powerpc: 2.6.32 update of defconfigs for embedded 6xx/7xxx, 8xx, 8{3,5,6}xxx
Updated mpc85xx_{smp_}defconfig to enable:
* XES_MPC85xx board
* PCI MSI
* RapidIO

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-11-05 08:26:38 -06:00
Kumar Gala 34466c5be4 powerpc: Update defconfigs for embedded 6xx/7xxx, 8xx, 8{3,5,6}xxx
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-07-29 23:34:01 -05:00
Martyn Welch f27d4d47dc powerpc/86xx: Update defconfig for GE Fanuc's PPC9A
General update of defconfig including the following notable changes:
 - Enable GPIO access via sysfs on GE Fanuc's PPC9A.
 - Enable Highmem support.
 - Support for PCMCIA based daughter card.

Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-07-29 23:28:05 -05:00
Kumar Gala 08af66b137 powerpc/86xx: Update defconfigs
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-13 17:26:51 -05:00
Martyn Welch e41c615a70 powerpc/86xx: Default configuration for GE Fanuc's PPC9A
Support for the PPC9A VME Single Board Computer from GE Fanuc (PowerPC
MPC8641D).

This is the default config file for GE Fanuc's PPC9A, a 6U single board
computer, based on Freescale's MPC8641D.

Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-19 04:01:18 -05:00