Adding 'I' event modifier to have complete set of modifiers for
perf_event_attr:exclude_* bits.
Any event specified with 'I' modifier will have the
perf_event_attr:exclude_idle bit set.
$ perf record -e cycles:I -vv ls 2>&1 | grep exclude_idle
exclude_hv 0 exclude_idle 1
Adding automated tests.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: William Cohen <wcohen@redhat.com>
Link: http://lkml.kernel.org/r/1428441919-23099-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Extend 'perf list --raw-dump' to 'perf list --raw-dump [hw|sw|cache
|tracepoint|pmu|event_glob]' in order to show the raw-dump of a certain
kind of events rather than all of the events.
Example:
Before this patch:
$ perf list --raw-dump hw
branch-instructions branch-misses bus-cycles cache-misses
cache-references cpu-cycles instructions stalled-cycles-backend
stalled-cycles-frontend
alignment-faults context-switches cpu-clock cpu-migrations
emulation-faults major-faults minor-faults page-faults task-clock
...
...
writeback:writeback_thread_start writeback:writeback_thread_stop
writeback:writeback_wait_iff_congested
writeback:writeback_wake_background writeback:writeback_wake_thread
As shown above, all of the events are printed.
After this patch:
$ perf list --raw-dump hw
branch-instructions branch-misses bus-cycles cache-misses
cache-references cpu-cycles instructions stalled-cycles-backend
stalled-cycles-frontend
As shown above, only the hw events are printed.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1425032491-20224-5-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch fix spelling typos found in tool/perf/Documentation.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Randy Dunlap <rdunlap@infradead.org>
Link: http://lkml.kernel.org/r/1410275930-17207-1-git-send-email-standby24x7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This commit adds support for a new modifier "D", which requests that the
event, or group of events, be pinned to the PMU.
The "p" modifier is already taken for precise, and "P" may be used in
future to mean "fully precise".
So we use "D", which stands for pinneD - and looks like a padlock, or if
you're using the ":D" syntax perf smiles at you.
This is an oft-requested feature from our HW folks, who want to be able
to run a large number of events, but also want 100% accurate results for
instructions per cycle.
Comparison of results with and without pinning:
$ perf stat -e '{cycles,instructions}:D' -e cycles,instructions,...
79,590,480,683 cycles # 0.000 GHz
166,123,716,524 instructions # 2.09 insns per cycle
# 0.11 stalled cycles per insn
79,352,134,463 cycles # 0.000 GHz [11.11%]
165,178,301,818 instructions # 2.08 insns per cycle
# 0.11 stalled cycles per insn [11.13%]
As you can see although perf does a very good job of scaling the values
in the non-pinned case, there is some small discrepancy.
The patch is fairly straight forward, the one detail is that we need to
make sure we only request pinning for the group leader when we have a
group.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1375795686-4226-1-git-send-email-michael@ellerman.id.au
[ Use perf_evsel__is_group_leader instead of open coded equivalent, as
suggested by Jiri Olsa ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding 'S' event/group modifier to specify that the event value/s are
read by PERF_SAMPLE_READ sample type processing, instead of the period
value offered by lower layers.
There's additional behaviour change for 'S' modifier being specified on
event group:
Currently all the events within a group makes samples. If user now
specifies 'S' within group modifier, only the leader will trigger
samples. The rest of events in the group will have sampling disabled.
And same as for single events, values of all events within the group
(including leader) are read by PERF_SAMPLE_READ sample type processing.
Following example will create event group with cycles and cache-misses
events, setting the cycles as group leader and the only event to
actually sample. Both cycles and cache-misses event period values are
read by PERF_SAMPLE_READ sample type processing with PERF_FORMAT_GROUP
read format.
Example:
$ perf record -e '{cycles,cache-misses}:S' ls
...
$ perf report --group --show-total-period --stdio
...
# Samples: 36 of event 'anon group { cycles, cache-misses }'
# Event count (approx.): 12585593
#
# Overhead Period Command Shared Object Symbol
# .............. .............. ....... ................. ..........................
#
19.92% 1.20% 2505936 31 ls [kernel.kallsyms] [k] mark_held_locks
13.74% 0.47% 1729327 12 ls [kernel.kallsyms] [k] sched_clock_local
13.64% 23.72% 1716147 612 ls ld-2.14.90.so [.] check_match.10805
13.12% 23.22% 1650778 599 ls libc-2.14.90.so [.] _nl_intern_locale_data
11.24% 29.19% 1414554 753 ls [kernel.kallsyms] [k] sched_clock_cpu
8.50% 0.35% 1070150 9 ls [kernel.kallsyms] [k] check_chain_key
...
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-iyoinu3axi11mymwnh2b7fxj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It was missing that only certain bit fields are passed to the config
value which confused users. Updating it.
Signed-off-by: Robert Richter <robert.richter@amd.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1344361396-7237-6-git-send-email-robert.richter@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To restrict a counter to either host or guest mode this patch introduces
two new event modifiers: G and H.
With G the counter is configured in guest-only mode and with H in
host-only mode.
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Link: http://lkml.kernel.org/n/tip-or5aj3rghy9ngyg882z6kln9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Existing documentation doesn't discuss event modifiers, so add a description of
what's currently possible to the documentation of perf-list.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
LKML-Reference: <1287107460-12112-1-git-send-email-sonnyrao@linux.vnet.ibm.com>
Signed-off-by: Sonny Rao <sonnyrao@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It was x86 specific and imcomplete at that, improve the situation by
making it clear where the example provided applies and by adding the
URLs for the Intel and AMD manuals where this is discussed in depth.
Acked-by: Robert Richter <robert.richter@amd.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Robert Richter <robert.richter@amd.com>
Reported-by: Robert Richter <robert.richter@amd.com
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Using explanation given by Ingo Molnar in the oprofile mailing list.
Suggested-by: Nick Black <dank@qemfd.net>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Nick Black <dank@qemfd.net>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Several people have suggested that 'perf' has become a full-fledged
tool that should be moved out of Documentation/. Move it to the
(new) tools/ directory.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Arnaldo Carvalho de Melo