By simply re-attaching to shared rings during connect_ring() rather than
assuming they are freshly allocated (i.e assuming the counters are zero)
it is possible for vbd instances to be unbound and re-bound from and to
(respectively) a running guest.
This has been tested by running:
while true;
do fio --name=randwrite --ioengine=libaio --iodepth=16 \
--rw=randwrite --bs=4k --direct=1 --size=1G --verify=crc32;
done
in a PV guest whilst running:
while true;
do echo vbd-$DOMID-$VBD >unbind;
echo unbound;
sleep 5;
echo vbd-$DOMID-$VBD >bind;
echo bound;
sleep 3;
done
in dom0 from /sys/bus/xen-backend/drivers/vbd to continuously unbind and
re-bind its system disk image.
This is a highly useful feature for a backend module as it allows it to be
unloaded and re-loaded (i.e. updated) without requiring domUs to be halted.
This was also tested by running:
while true;
do echo vbd-$DOMID-$VBD >unbind;
echo unbound;
sleep 5;
rmmod xen-blkback;
echo unloaded;
sleep 1;
modprobe xen-blkback;
echo bound;
cd $(pwd);
sleep 3;
done
in dom0 whilst running the same loop as above in the (single) PV guest.
Some (less stressful) testing has also been done using a Windows HVM guest
with the latest 9.0 PV drivers installed.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Currently these macros are defined to re-initialize a front/back ring
(respectively) to values read from the shared ring in such a way that any
requests/responses that are added to the shared ring whilst the front/back
is detached will be skipped over. This, in general, is not a desirable
semantic since most frontend implementations will eventually block waiting
for a response which would either never appear or never be processed.
Since the macros are currently unused, take this opportunity to re-define
them to re-initialize a front/back ring using specified values. This also
allows FRONT/BACK_RING_INIT() to be re-defined in terms of
FRONT/BACK_RING_ATTACH() using a specified value of 0.
NOTE: BACK_RING_ATTACH() will be used directly in a subsequent patch.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
If a driver probe() fails then leave the xenstore state alone. There is no
reason to modify it as the failure may be due to transient resource
allocation issues and hence a subsequent probe() may succeed.
If the driver supports re-binding then only force state to closed during
remove() only in the case when the toolstack may need to clean up. This can
be detected by checking whether the state in xenstore has been set to
closing prior to device removal.
NOTE: Re-bind support is indicated by new boolean in struct xenbus_driver,
which defaults to false. Subsequent patches will add support to
some backend drivers.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
...and make it static
xenbus_dev_shutdown() is seemingly intended to cause clean shutdown of PV
frontends when a guest is rebooted. Indeed the function waits for a
conpletion which is only set by a call to xenbus_frontend_closed().
This patch removes the shutdown() method from backends and moves
xenbus_dev_shutdown() from xenbus_probe.c into xenbus_probe_frontend.c,
renaming it appropriately and making it static.
NOTE: In the case where the backend is running in a driver domain, the
toolstack should have already terminated any frontends that may be
using it (since Xen does not support re-startable PV driver domains)
so xenbus_dev_shutdown() should never be called.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Clang warns:
../drivers/block/xen-blkfront.c:1117:4: warning: misleading indentation;
statement is not part of the previous 'if' [-Wmisleading-indentation]
nr_parts = PARTS_PER_DISK;
^
../drivers/block/xen-blkfront.c:1115:3: note: previous statement is here
if (err)
^
This is because there is a space at the beginning of this line; remove
it so that the indentation is consistent according to the Linux kernel
coding style and clang no longer warns.
While we are here, the previous line has some trailing whitespace; clean
that up as well.
Fixes: c80a420995 ("xen-blkfront: handle Xen major numbers other than XENVBD")
Link: https://github.com/ClangBuiltLinux/linux/issues/791
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
The sifive_l2_cache.c is in no way related to RISC-V architecture
memory management. It is a little stub driver working around the fact
that the EDAC maintainers prefer their drivers to be structured in a
certain way that doesn't fit the SiFive SOCs.
Move the file to drivers/soc and add a Kconfig option for it, as well
as the whole drivers/soc boilerplate for CONFIG_SOC_SIFIVE.
Fixes: a967a289f1 ("RISC-V: sifive_l2_cache: Add L2 cache controller driver for SiFive SoCs")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
[paul.walmsley@sifive.com: keep the MAINTAINERS change specific to the L2$ controller code]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
pfn_to_page & page_to_pfn depend on vmemmap being available before the calls
if kernel is configured with CONFIG_SPARSEMEM_VMEMMAP=y. This was caused
by NOMMU changes which moved vmemmap definition bellow functions definitions
calling pfn_to_page & page_to_pfn.
Noticed while compiled 5.5-rc2 kernel for Fedora/RISCV.
v2:
- Add a comment for vmemmap in source
Signed-off-by: David Abdurachmanov <david.abdurachmanov@sifive.com>
Fixes: 6bd33e1ece ("riscv: add nommu support")
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
This patch fixes that the sscratch register clearing in M-mode. It cleared
sscratch register in M-mode, but it should clear mscratch register. That will
cause kernel trap if the CPU core doesn't support S-mode when trying to access
sscratch.
Fixes: 9e80635619 ("riscv: clear the instruction cache and all registers when booting")
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
In Kconfig files, config options are written without the CONFIG_ prefix.
Fixes: 6bd33e1ece ("riscv: add nommu support")
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Davide Caratti says:
====================
net/sched: cls_u32: fix refcount leak
a refcount leak in the error path of u32_change() has been recently
introduced. It can be observed with the following commands:
[root@f31 ~]# tc filter replace dev eth0 ingress protocol ip prio 97 \
> u32 match ip src 127.0.0.1/32 indev notexist20 flowid 1:1 action drop
RTNETLINK answers: Invalid argument
We have an error talking to the kernel
[root@f31 ~]# tc filter replace dev eth0 ingress protocol ip prio 98 \
> handle 42:42 u32 divisor 256
Error: cls_u32: Divisor can only be used on a hash table.
We have an error talking to the kernel
[root@f31 ~]# tc filter replace dev eth0 ingress protocol ip prio 99 \
> u32 ht 47:47
Error: cls_u32: Specified hash table not found.
We have an error talking to the kernel
they all legitimately return -EINVAL; however, they leave semi-configured
filters at eth0 tc ingress:
[root@f31 ~]# tc filter show dev eth0 ingress
filter protocol ip pref 97 u32 chain 0
filter protocol ip pref 97 u32 chain 0 fh 800: ht divisor 1
filter protocol ip pref 98 u32 chain 0
filter protocol ip pref 98 u32 chain 0 fh 801: ht divisor 1
filter protocol ip pref 99 u32 chain 0
filter protocol ip pref 99 u32 chain 0 fh 802: ht divisor 1
With older kernels, filters were unconditionally considered empty (and
thus de-refcounted) on the error path of ->change().
After commit 8b64678e0a ("net: sched: refactor tp insert/delete for
concurrent execution"), filters were considered empty when the walk()
function didn't set 'walker.stop' to 1.
Finally, with commit 6676d5e416 ("net: sched: set dedicated tcf_walker
flag when tp is empty"), tc filters are considered empty unless the walker
function is called with a non-NULL handle. This last change doesn't fit
cls_u32 design, because at least the "root hnode" is (almost) always
non-NULL, as it's allocated in u32_init().
- patch 1/2 is a proposal to restore the original kernel behavior, where
no filter was installed in the error path of u32_change().
- patch 2/2 adds tdc selftests that can be ued to verify the correct
behavior of u32 in the error path of ->change().
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
- move test "e9a3 - Add u32 with source match" to u32.json, and change the
match pattern to catch all hnodes
- add testcases for relevant error paths of cls_u32 module
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
when users replace cls_u32 filters with new ones having wrong parameters,
so that u32_change() fails to validate them, the kernel doesn't roll-back
correctly, and leaves semi-configured rules.
Fix this in u32_walk(), avoiding a call to the walker function on filters
that don't have a match rule connected. The side effect is, these "empty"
filters are not even dumped when present; but that shouldn't be a problem
as long as we are restoring the original behaviour, where semi-configured
filters were not even added in the error path of u32_change().
Fixes: 6676d5e416 ("net: sched: set dedicated tcf_walker flag when tp is empty")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In s3fwrn5_fw_recv_frame, if fw_info->rsp is not empty, the
current code causes a crash via BUG_ON. However, s3fwrn5_fw_send_msg
does not crash in such a scenario. The patch replaces the BUG_ON
by returning the error to the callers and frees up skb.
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Antoine Tenart says:
====================
net: macb: fix probing of PHY not described in the dt
The macb Ethernet driver supports various ways of referencing its
network PHY. When a device tree is used the PHY can be referenced with
a phy-handle or, if connected to its internal MDIO bus, described in
a child node. Some platforms omitted the PHY description while
connecting the PHY to the internal MDIO bus and in such cases the MDIO
bus has to be scanned "manually" by the macb driver.
Prior to the phylink conversion the driver registered the MDIO bus with
of_mdiobus_register and then in case the PHY couldn't be retrieved
using dt or using phy_find_first (because registering an MDIO bus with
of_mdiobus_register masks all PHYs) the macb driver was "manually"
scanning the MDIO bus (like mdiobus_register does). The phylink
conversion did break this particular case but reimplementing the manual
scan of the bus in the macb driver wouldn't be very clean. The solution
seems to be registering the MDIO bus based on if the PHYs are described
in the device tree or not.
There are multiple ways to do this, none is perfect. I chose to check if
any of the child nodes of the macb node was a network PHY and based on
this to register the MDIO bus with the of_ helper or not. The drawback
is boards referencing the PHY through phy-handle, would scan the entire
MDIO bus of the macb at boot time (as the MDIO bus would be registered
with mdiobus_register). For this solution to work properly
of_mdiobus_child_is_phy has to be exported, which means the patch doing
so has to be backported to -stable as well.
Another possible solution could have been to simply check if the macb
node has a child node by counting its sub-nodes. This isn't techically
perfect, as there could be other sub-nodes (in practice this should be
fine, fixed-link being taken care of in the driver). We could also
simply s/of_mdiobus_register/mdiobus_register/ but that could break
boards using the PHY description in child node as a selector (which
really would be not a proper way to do this...).
The real issue here being having PHYs not described in the dt but we
have dt backward compatibility, so we have to live with that.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes the case where the PHY isn't described in the device
tree. This is due to the way the MDIO bus is registered in the driver:
whether the PHY is described in the device tree or not, the bus is
registered through of_mdiobus_register. The function masks all the PHYs
and only allow probing the ones described in the device tree. Prior to
the Phylink conversion this was also done but later on in the driver
the MDIO bus was manually scanned to circumvent the fact that the PHY
wasn't described.
This patch fixes it in a proper way, by registering the MDIO bus based
on if the PHY attached to a given interface is described in the device
tree or not.
Fixes: 7897b071ac ("net: macb: convert to phylink")
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch exports of_mdiobus_child_is_phy, allowing to check if a child
node is a network PHY.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The compare functions of the histogram code would be specific for the size
of the value being compared (byte, short, int, long long). It would
reference the value from the array via the type of the compare, but the
value was stored in a 64 bit number. This is fine for little endian
machines, but for big endian machines, it would end up comparing zeros or
all ones (depending on the sign) for anything but 64 bit numbers.
To fix this, first derference the value as a u64 then convert it to the type
being compared.
Link: http://lkml.kernel.org/r/20191211103557.7bed6928@gandalf.local.home
Cc: stable@vger.kernel.org
Fixes: 08d43a5fa0 ("tracing: Add lock-free tracing_map")
Acked-by: Tom Zanussi <zanussi@kernel.org>
Reported-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Daniel Borkmann says:
====================
pull-request: bpf 2019-12-19
The following pull-request contains BPF updates for your *net* tree.
We've added 10 non-merge commits during the last 8 day(s) which contain
a total of 21 files changed, 269 insertions(+), 108 deletions(-).
The main changes are:
1) Fix lack of synchronization between xsk wakeup and destroying resources
used by xsk wakeup, from Maxim Mikityanskiy.
2) Fix pruning with tail call patching, untrack programs in case of verifier
error and fix a cgroup local storage tracking bug, from Daniel Borkmann.
3) Fix clearing skb->tstamp in bpf_redirect() when going from ingress to
egress which otherwise cause issues e.g. on fq qdisc, from Lorenz Bauer.
4) Fix compile warning of unused proc_dointvec_minmax_bpf_restricted() when
only cBPF is present, from Alexander Lobakin.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Expand dummy prog generation such that we can easily check on return
codes and add few more test cases to make sure we keep on tracking
pruning behavior.
# ./test_verifier
[...]
#1066/p XDP pkt read, pkt_data <= pkt_meta', bad access 1 OK
#1067/p XDP pkt read, pkt_data <= pkt_meta', bad access 2 OK
Summary: 1580 PASSED, 0 SKIPPED, 0 FAILED
Also verified that JIT dump of added test cases looks good.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/df7200b6021444fd369376d227de917357285b65.1576789878.git.daniel@iogearbox.net
While testing Cilium with /unreleased/ Linus' tree under BPF-based NodePort
implementation, I noticed a strange BPF SNAT engine behavior from time to
time. In some cases it would do the correct SNAT/DNAT service translation,
but at a random point in time it would just stop and perform an unexpected
translation after SYN, SYN/ACK and stack would send a RST back. While initially
assuming that there is some sort of a race condition in BPF code, adding
trace_printk()s for debugging purposes at some point seemed to have resolved
the issue auto-magically.
Digging deeper on this Heisenbug and reducing the trace_printk() calls to
an absolute minimum, it turns out that a single call would suffice to
trigger / not trigger the seen RST issue, even though the logic of the
program itself remains unchanged. Turns out the single call changed verifier
pruning behavior to get everything to work. Reconstructing a minimal test
case, the incorrect JIT dump looked as follows:
# bpftool p d j i 11346
0xffffffffc0cba96c:
[...]
21: movzbq 0x30(%rdi),%rax
26: cmp $0xd,%rax
2a: je 0x000000000000003a
2c: xor %edx,%edx
2e: movabs $0xffff89cc74e85800,%rsi
38: jmp 0x0000000000000049
3a: mov $0x2,%edx
3f: movabs $0xffff89cc74e85800,%rsi
49: mov -0x224(%rbp),%eax
4f: cmp $0x20,%eax
52: ja 0x0000000000000062
54: add $0x1,%eax
57: mov %eax,-0x224(%rbp)
5d: jmpq 0xffffffffffff6911
62: mov $0x1,%eax
[...]
Hence, unexpectedly, JIT emitted a direct jump even though retpoline based
one would have been needed since in line 2c and 3a we have different slot
keys in BPF reg r3. Verifier log of the test case reveals what happened:
0: (b7) r0 = 14
1: (73) *(u8 *)(r1 +48) = r0
2: (71) r0 = *(u8 *)(r1 +48)
3: (15) if r0 == 0xd goto pc+4
R0_w=inv(id=0,umax_value=255,var_off=(0x0; 0xff)) R1=ctx(id=0,off=0,imm=0) R10=fp0
4: (b7) r3 = 0
5: (18) r2 = 0xffff89cc74d54a00
7: (05) goto pc+3
11: (85) call bpf_tail_call#12
12: (b7) r0 = 1
13: (95) exit
from 3 to 8: R0_w=inv13 R1=ctx(id=0,off=0,imm=0) R10=fp0
8: (b7) r3 = 2
9: (18) r2 = 0xffff89cc74d54a00
11: safe
processed 13 insns (limit 1000000) [...]
Second branch is pruned by verifier since considered safe, but issue is that
record_func_key() couldn't have seen the index in line 3a and therefore
decided that emitting a direct jump at this location was okay.
Fix this by reusing our backtracking logic for precise scalar verification
in order to prevent pruning on the slot key. This means verifier will track
content of r3 all the way backwards and only prune if both scalars were
unknown in state equivalence check and therefore poisoned in the first place
in record_func_key(). The range is [x,x] in record_func_key() case since
the slot always would have to be constant immediate. Correct verification
after fix:
0: (b7) r0 = 14
1: (73) *(u8 *)(r1 +48) = r0
2: (71) r0 = *(u8 *)(r1 +48)
3: (15) if r0 == 0xd goto pc+4
R0_w=invP(id=0,umax_value=255,var_off=(0x0; 0xff)) R1=ctx(id=0,off=0,imm=0) R10=fp0
4: (b7) r3 = 0
5: (18) r2 = 0x0
7: (05) goto pc+3
11: (85) call bpf_tail_call#12
12: (b7) r0 = 1
13: (95) exit
from 3 to 8: R0_w=invP13 R1=ctx(id=0,off=0,imm=0) R10=fp0
8: (b7) r3 = 2
9: (18) r2 = 0x0
11: (85) call bpf_tail_call#12
12: (b7) r0 = 1
13: (95) exit
processed 15 insns (limit 1000000) [...]
And correct corresponding JIT dump:
# bpftool p d j i 11
0xffffffffc0dc34c4:
[...]
21: movzbq 0x30(%rdi),%rax
26: cmp $0xd,%rax
2a: je 0x000000000000003a
2c: xor %edx,%edx
2e: movabs $0xffff9928b4c02200,%rsi
38: jmp 0x0000000000000049
3a: mov $0x2,%edx
3f: movabs $0xffff9928b4c02200,%rsi
49: cmp $0x4,%rdx
4d: jae 0x0000000000000093
4f: and $0x3,%edx
52: mov %edx,%edx
54: cmp %edx,0x24(%rsi)
57: jbe 0x0000000000000093
59: mov -0x224(%rbp),%eax
5f: cmp $0x20,%eax
62: ja 0x0000000000000093
64: add $0x1,%eax
67: mov %eax,-0x224(%rbp)
6d: mov 0x110(%rsi,%rdx,8),%rax
75: test %rax,%rax
78: je 0x0000000000000093
7a: mov 0x30(%rax),%rax
7e: add $0x19,%rax
82: callq 0x000000000000008e
87: pause
89: lfence
8c: jmp 0x0000000000000087
8e: mov %rax,(%rsp)
92: retq
93: mov $0x1,%eax
[...]
Also explicitly adding explicit env->allow_ptr_leaks to fixup_bpf_calls() since
backtracking is enabled under former (direct jumps as well, but use different
test). In case of only tracking different map pointers as in c93552c443 ("bpf:
properly enforce index mask to prevent out-of-bounds speculation"), pruning
cannot make such short-cuts, neither if there are paths with scalar and non-scalar
types as r3. mark_chain_precision() is only needed after we know that
register_is_const(). If it was not the case, we already poison the key on first
path and non-const key in later paths are not matching the scalar range in regsafe()
either. Cilium NodePort testing passes fine as well now. Note, released kernels
not affected.
Fixes: d2e4c1e6c2 ("bpf: Constant map key tracking for prog array pokes")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/ac43ffdeb7386c5bd688761ed266f3722bb39823.1576789878.git.daniel@iogearbox.net
proc_dointvec_minmax_bpf_restricted() has been firstly introduced
in commit 2e4a30983b ("bpf: restrict access to core bpf sysctls")
under CONFIG_HAVE_EBPF_JIT. Then, this ifdef has been removed in
ede95a63b5 ("bpf: add bpf_jit_limit knob to restrict unpriv
allocations"), because a new sysctl, bpf_jit_limit, made use of it.
Finally, this parameter has become long instead of integer with
fdadd04931 ("bpf: fix bpf_jit_limit knob for PAGE_SIZE >= 64K")
and thus, a new proc_dolongvec_minmax_bpf_restricted() has been
added.
With this last change, we got back to that
proc_dointvec_minmax_bpf_restricted() is used only under
CONFIG_HAVE_EBPF_JIT, but the corresponding ifdef has not been
brought back.
So, in configurations like CONFIG_BPF_JIT=y && CONFIG_HAVE_EBPF_JIT=n
since v4.20 we have:
CC net/core/sysctl_net_core.o
net/core/sysctl_net_core.c:292:1: warning: ‘proc_dointvec_minmax_bpf_restricted’ defined but not used [-Wunused-function]
292 | proc_dointvec_minmax_bpf_restricted(struct ctl_table *table, int write,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Suppress this by guarding it with CONFIG_HAVE_EBPF_JIT again.
Fixes: fdadd04931 ("bpf: fix bpf_jit_limit knob for PAGE_SIZE >= 64K")
Signed-off-by: Alexander Lobakin <alobakin@dlink.ru>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191218091821.7080-1-alobakin@dlink.ru
Merge fixes from Andrew Morton:
"6 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
lib/Kconfig.debug: fix some messed up configurations
mm: vmscan: protect shrinker idr replace with CONFIG_MEMCG
kasan: don't assume percpu shadow allocations will succeed
kasan: use apply_to_existing_page_range() for releasing vmalloc shadow
mm/memory.c: add apply_to_existing_page_range() helper
kasan: fix crashes on access to memory mapped by vm_map_ram()
Fix a problem related to CPU offline/online and cpufreq governors
that in some system configurations may lead to a system-wide
deadlock during CPU online.
-----BEGIN PGP SIGNATURE-----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=+MQE
-----END PGP SIGNATURE-----
Merge tag 'pm-5.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Fix a problem related to CPU offline/online and cpufreq governors that
in some system configurations may lead to a system-wide deadlock
during CPU online"
* tag 'pm-5.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: Avoid leaving stale IRQ work items during CPU offline
Alex Lyakas reported[1] that mounting an xfs filesystem with new sunit
and swidth values could cause xfs_repair to fail loudly. The problem
here is that repair calculates the where mkfs should have allocated the
root inode, based on the superblock geometry. The allocation decisions
depend on sunit, which means that we really can't go updating sunit if
it would lead to a subsequent repair failure on an otherwise correct
filesystem.
Port from xfs_repair some code that computes the location of the root
inode and teach mount to skip the ondisk update if it would cause
problems for repair. Along the way we'll update the documentation,
provide a function for computing the minimum AGFL size instead of
open-coding it, and cut down some indenting in the mount code.
Note that we allow the mount to proceed (and new allocations will
reflect this new geometry) because we've never screened this kind of
thing before. We'll have to wait for a new future incompat feature to
enforce correct behavior, alas.
Note that the geometry reporting always uses the superblock values, not
the incore ones, so that is what xfs_info and xfs_growfs will report.
[1] https://lore.kernel.org/linux-xfs/20191125130744.GA44777@bfoster/T/#m00f9594b511e076e2fcdd489d78bc30216d72a7d
Reported-by: Alex Lyakas <alex@zadara.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
If the administrator provided a sunit= mount option, we need to validate
the raw parameter, convert the mount option units (512b blocks) into the
internal unit (fs blocks), and then validate that the (now cooked)
parameter doesn't screw anything up on disk. The incore inode geometry
computation can depend on the new sunit option, but a subsequent patch
will make validating the cooked value depends on the computed inode
geometry, so break the sunit update into two steps.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Refactor xfs_alloc_min_freelist to accept a NULL @pag argument, in which
case it returns the largest possible minimum length. This will be used
in an upcoming patch to compute the length of the AGFL at mkfs time.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Prepare to resync the userspace libxfs with the kernel libxfs. There
were a few things I missed -- a couple of static inline directory
functions that have to be exported for xfs_repair; a couple of directory
naming functions that make porting much easier if they're /not/ static
inline; and a u16 usage that should have been uint16_t.
None of these things are bugs in their own right; this just makes
porting xfsprogs easier.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
The xfs_log_item flags were converted to atomic bitops as of commit
22525c17ed ("xfs: log item flags are racy"). The assert check for
AIL presence in xfs_buf_item_relse() still uses the old value based
check. This likely went unnoticed as XFS_LI_IN_AIL evaluates to 0
and causes the assert to unconditionally pass. Fix up the check.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Fixes: 22525c17ed ("xfs: log item flags are racy")
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Maxim Mikityanskiy says:
====================
This series addresses the issue described in the commit message of the
first patch: lack of synchronization between XSK wakeup and destroying
the resources used by XSK wakeup. The idea is similar to napi_synchronize.
The series contains fixes for the drivers that implement XSK.
v2 incorporates changes suggested by Björn:
1. Call synchronize_rcu in Intel drivers only if the XDP program is
being unloaded.
2. Don't forget rcu_read_lock when wakeup is called from xsk_poll.
3. Use xs->zc as the condition to call ndo_xsk_wakeup.
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Use synchronize_rcu to wait until the XSK wakeup function finishes
before destroying the resources it uses:
1. ixgbe_down already calls synchronize_rcu after setting __IXGBE_DOWN.
2. After switching the XDP program, call synchronize_rcu to let
ixgbe_xsk_wakeup exit before the XDP program is freed.
3. Changing the number of channels brings the interface down.
4. Disabling UMEM sets __IXGBE_TX_DISABLED before closing hardware
resources and resetting xsk_umem. Check that bit in ixgbe_xsk_wakeup to
avoid using the XDP ring when it's already destroyed. synchronize_rcu is
called from ixgbe_txrx_ring_disable.
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191217162023.16011-5-maximmi@mellanox.com
Use synchronize_rcu to wait until the XSK wakeup function finishes
before destroying the resources it uses:
1. i40e_down already calls synchronize_rcu. On i40e_down either
__I40E_VSI_DOWN or __I40E_CONFIG_BUSY is set. Check the latter in
i40e_xsk_wakeup (the former is already checked there).
2. After switching the XDP program, call synchronize_rcu to let
i40e_xsk_wakeup exit before the XDP program is freed.
3. Changing the number of channels brings the interface down (see
i40e_prep_for_reset and i40e_pf_quiesce_all_vsi).
4. Disabling UMEM sets __I40E_CONFIG_BUSY, too.
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191217162023.16011-4-maximmi@mellanox.com
After disabling resources necessary for XSK (the XDP program, channels,
XSK queues), use synchronize_rcu to wait until the XSK wakeup function
finishes, before freeing the resources.
Suspend XSK wakeups during switching channels. If the XDP program is
being removed, synchronize_rcu before closing the old channels to allow
XSK wakeup to complete.
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191217162023.16011-3-maximmi@mellanox.com
The XSK wakeup callback in drivers makes some sanity checks before
triggering NAPI. However, some configuration changes may occur during
this function that affect the result of those checks. For example, the
interface can go down, and all the resources will be destroyed after the
checks in the wakeup function, but before it attempts to use these
resources. Wrap this callback in rcu_read_lock to allow driver to
synchronize_rcu before actually destroying the resources.
xsk_wakeup is a new function that encapsulates calling ndo_xsk_wakeup
wrapped into the RCU lock. After this commit, xsk_poll starts using
xsk_wakeup and checks xs->zc instead of ndo_xsk_wakeup != NULL to decide
ndo_xsk_wakeup should be called. It also fixes a bug introduced with the
need_wakeup feature: a non-zero-copy socket may be used with a driver
supporting zero-copy, and in this case ndo_xsk_wakeup should not be
called, so the xs->zc check is the correct one.
Fixes: 77cd0d7b3f ("xsk: add support for need_wakeup flag in AF_XDP rings")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191217162023.16011-2-maximmi@mellanox.com
The erratum A-009204 workaround patch was reverted because of
incorrect implementation.
8b6dc6b mmc: sdhci-of-esdhc: Revert "mmc: sdhci-of-esdhc: add
erratum A-009204 support"
This patch is to re-implement the workaround (add a 5 ms delay
before setting SYSCTL[RSTD] to make sure all the DMA transfers
are finished).
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Link: https://lore.kernel.org/r/20191219032335.26528-1-yangbo.lu@nxp.com
Fixes: 5dd1955225 ("mmc: sdhci-of-esdhc: add erratum A-009204 support")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Mark the msm8998 cpu CX gdsc as votable and use the hw control to avoid
corner cases with SMMU per hardware documentation.
Fixes: 3f7df5baa2 ("clk: qcom: Add MSM8998 GPU Clock Controller (GPUCC) driver")
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Link: https://lkml.kernel.org/r/20191217171905.5619-1-jeffrey.l.hugo@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
-----BEGIN PGP SIGNATURE-----
iJYEABYIAD4WIQRE6pSOnaBC00OEHEIaerohdGur0gUCXfrLASAcamFya2tvLnNh
a2tpbmVuQGxpbnV4LmludGVsLmNvbQAKCRAaerohdGur0pZfAQD9F5Vjdqp3fWk+
pxt+eD9+xaD2MYuSVO2AEVBC949vdQD/TP7xnb66w7n9YtMtm9MgvysHAakJYeAe
l4XsHAiPHgI=
=CFIs
-----END PGP SIGNATURE-----
Merge tag 'tpmdd-next-20191219' of git://git.infradead.org/users/jjs/linux-tpmdd
Pull tpm fixes from Jarkko Sakkinen:
"Bunch of fixes for rc3"
* tag 'tpmdd-next-20191219' of git://git.infradead.org/users/jjs/linux-tpmdd:
tpm/tpm_ftpm_tee: add shutdown call back
tpm: selftest: cleanup after unseal with wrong auth/policy test
tpm: selftest: add test covering async mode
tpm: fix invalid locking in NONBLOCKING mode
security: keys: trusted: fix lost handle flush
tpm_tis: reserve chip for duration of tpm_tis_core_init
KEYS: asymmetric: return ENOMEM if akcipher_request_alloc() fails
KEYS: remove CONFIG_KEYS_COMPAT
Add shutdown call back to close existing session with fTPM TA
to support kexec scenario.
Add parentheses to function names in comments as specified in kdoc.
Signed-off-by: Thirupathaiah Annapureddy <thiruan@microsoft.com>
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
The driver forgets to call component_del in remove to match component_add
in probe.
Add the missed call to fix it.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Inki Dae <inki.dae@samsung.net>
A typical backtrace acquired from ftraced function currently looks like
the following (e.g. for "path_openat"):
arch_stack_walk+0x15c/0x2d8
stack_trace_save+0x50/0x68
stack_trace_call+0x15a/0x3b8
ftrace_graph_caller+0x0/0x1c
0x3e0007e3c98 <- ftraced function caller (should be do_filp_open+0x7c/0xe8)
do_open_execat+0x70/0x1b8
__do_execve_file.isra.0+0x7d8/0x860
__s390x_sys_execve+0x56/0x68
system_call+0xdc/0x2d8
Note random "0x3e0007e3c98" stack value as ftraced function caller. This
value causes either imprecise unwinder result or unwinding failure.
That "0x3e0007e3c98" comes from r14 of ftraced function stack frame, which
it haven't had a chance to initialize since the very first instruction
calls ftrace code ("ftrace_caller"). (ftraced function might never
save r14 as well). Nevertheless according to s390 ABI any function
is called with stack frame allocated for it and r14 contains return
address. "ftrace_caller" itself is called with "brasl %r0,ftrace_caller".
So, to fix this issue simply always save traced function caller onto
ftraced function stack frame.
Reported-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Consider reaching user mode pt_regs at the bottom of irq stack graceful
unwinder termination. This is the case when irq/mcck/ext interrupt arrives
while in user mode.
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
the purgatory must not rely on functions from the "old" kernel,
so we must disable kasan and friends. We also need to have a
separate copy of string.c as the default does not build memcmp
with KASAN.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Since we link purgatory with -r aka we enable "incremental linking"
no checks for unresolved symbols are done while linking the purgatory.
This commit adds an extra check for unresolved symbols by calling ld
without -r before running objcopy to generate purgatory.ro.
This will help us catch missing symbols in the purgatory sooner.
Note this commit also removes --no-undefined from LDFLAGS_purgatory
as that has no effect.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/lkml/20191212205304.191610-1-hdegoede@redhat.com
Tested-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The following sequence triggers a kernel stack overflow on s390x:
mount -t tracefs tracefs /sys/kernel/tracing
cd /sys/kernel/tracing
echo function_graph > current_tracer
[crash]
This is because preempt_count_{add,sub} are in the list of traced
functions, which can be demonstrated by:
echo preempt_count_add >set_ftrace_filter
echo function_graph > current_tracer
[crash]
The stack overflow happens because get_tod_clock_monotonic() gets called
by ftrace but itself calls preempt_{disable,enable}(), which leads to a
endless recursion. Fix this by using preempt_{disable,enable}_notrace().
Fixes: 011620688a ("s390/time: ensure get_clock_monotonic() returns monotonic values")
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Jose Abreu says:
====================
net: stmmac: Fixes for -net
Fixes for stmmac.
1) Fixes the filtering selftests (again) for cases when the number of multicast
filters are not enough.
2) Fixes SPH feature for MTU > default.
3) Fixes the behavior of accepting invalid MTU values.
4) Fixes FCS stripping for multi-descriptor packets.
5) Fixes the change of RX buffer size in XGMAC.
6) Fixes RX buffer size alignment.
7) Fixes the 16KB buffer alignment.
8) Fixes the enabling of 16KB buffer size feature.
9) Always arm the TX coalesce timer so that missed interrupts do not cause
a TX queue timeout.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
If TX Coalesce timer is enabled we should always arm it, otherwise we
may hit the case where an interrupt is missed and the TX Queue will
timeout.
Arming the timer does not necessarly mean it will run the tx_clean()
because this function is wrapped around NAPI launcher.
Fixes: 9125cdd1be ("stmmac: add the initial tx coalesce schema")
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
XGMAC supports maximum MTU that can go to 16KB. Lets add this check in
the calculation of RX buffer size.
Fixes: 7ac6653a08 ("stmmac: Move the STMicroelectronics driver")
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The 16KB RX Buffer must also be 16 byte aligned. Fix it.
Fixes: 7ac6653a08 ("stmmac: Move the STMicroelectronics driver")
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paul Durrant