mirror of https://gitee.com/openkylin/linux.git
101 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Linus Torvalds
|
eb7046e9bf |
platform-drivers-x86 for v4.20-1
Move the Dell dcdbas and dell_rbu drivers into platform/drivers/x86 as they are closely coupled with other drivers in this location. Improve _init* usage for acerhdf and fix some usage issues with messages and module parameters. Simplify asus-wmi by calling ACPI/WMI methods directly, eliminating workqueue overhead, eliminate double reporting of keyboard backlight. Fix wake from USB failure on Bay Trail devices (intel_int0002_vgpio). Notify intel_telemetry users when IPC1 device is not enabled. Update various drivers with new laptop model IDs. Update several intel drivers to use SPDX identifers and order headers alphabetically. The following is an automated git shortlog grouped by driver: Add Intel AtomISP2 dummy / power-management driver: - Add Intel AtomISP2 dummy / power-management driver lg-laptop: - Add LG Gram laptop special features driver HID: - asus: only support backlight when it's not driven by WMI MAINTAINERS: - intel_telemetry: Update maintainers info - intel_pmc_core: Update MAINTAINERS - Update maintainer for dcdbas and dell_rbu - Use my infradead account exclusively for PDx86 work acerhdf: - restructure to allow large BIOS table be __initconst - mark appropriate content with __init prefix - Add BIOS entry for Gateway LT31 v1.3307 - Remove cut-and-paste trap from instructions - Enable ability to list supported systems - clarify modinfo messages for BIOS override asus-wmi: - export function for evaluating WMI methods - Only notify kbd LED hw_change by fn-key pressed - Simplify the keyboard brightness updating process firmware: - dcdbas: include linux/io.h - dcdbas: Move dcdbas to drivers/platform/x86 - dell_rbu: Move dell_rbu to drivers/platform/x86 - dcdbas: Add support for WSMT ACPI table - dell_rbu: Make payload memory uncachable ideapad-laptop: - Add Y530-15ICH to no_hw_rfkill - Use __func__ instead of read_ec_cmd in pr_err intel-hid: - Convert to use SPDX identifier intel-ips: - Convert to use SPDX identifier intel-rst: - Convert to use SPDX identifier - Sort headers alphabetically intel-smartconnect: - Convert to use SPDX identifier - Sort headers alphabetically intel-wmi-thunderbolt: - Add dynamic debugging - Convert to use SPDX identifier intel_bxtwc_tmu: - Convert to use SPDX identifier intel_cht_int33fe: - Convert to use SPDX identifier intel_chtdc_ti_pwrbtn: - Add SPDX identifier intel_int0002_vgpio: - Convert to use SPDX identifier - Implement irq_set_wake - Enable the driver on Bay Trail platforms intel_menlow: - Convert to use SPDX identifier - Sort headers alphabetically intel_mid_powerbtn: - Convert to use SPDX identifier - Remove unnecessary init.h inclusion - Get rid of custom ICPU() macro intel_mid_thermal: - Convert to use SPDX identifier - Sort headers alphabetically intel_oaktrail: - Convert to use SPDX identifier - Sort headers alphabetically intel_pmc: - Convert to use SPDX identifier - Sort headers alphabetically intel_punit_ipc: - Convert to use SPDX identifier - Sort headers alphabetically intel_scu_ipc: - Convert to use SPDX identifier - Sort headers alphabetically intel_telemetry: - Get rid of custom macro - report debugfs failure - Convert to use SPDX identifier intel_turbo_max_3: - Convert to use SPDX identifier - Sort headers alphabetically mlx-platform: - Properly use mlxplat_mlxcpld_msn201x_items touchscreen_dmi: - Add min-x and min-y settings for various models - Add info for the Onda V80 Plus v3 tablet - Add info for the Trekstor Primetab T13B tablet - Add info for the Trekstor Primebook C11 convertible tracing: - Trivia spelling fix containerof() -> container_of() wmi: - declare device_type structure as constant -----BEGIN PGP SIGNATURE----- iQEcBAABAgAGBQJb2mDCAAoJEKbMaAwKp364KdkH/Rar8cenw7uFeVzT5o4fGzTn 0Oo1Pnwh+hPgmQwmf8O/mHsa/1Zb9nX4nNLU/ysDUjAAZ9wZLoB57HlImQquPA74 c8lXTz5MVF140WB1f1Ck5PmeonJR2Xve7HTYCoBmGo71jOxHxCgJbp1Giiho0Imd 3NXzzahEnAiy/L5PhqqYTmIfTeAHQ2Fo7GkHCjMnS20FP2fBtvPrc7db03F+FZ4y QTfbT0oR42NdeW21AbCRGY3P47axB3xDJX4LOYrb4uo4CIzd1yatlHk407NRRyv8 pab6aeJR23FouA/tcvv+T36D3vqRw78e6BWdoyowWOd7CUOgjtSC3lKGzfT6hSY= =0BDZ -----END PGP SIGNATURE----- Merge tag 'platform-drivers-x86-v4.20-1' of git://git.infradead.org/linux-platform-drivers-x86 Pull x86 platform driver updates from Darren Hart: - Move the Dell dcdbas and dell_rbu drivers into platform/drivers/x86 as they are closely coupled with other drivers in this location. - Improve _init* usage for acerhdf and fix some usage issues with messages and module parameters. - Simplify asus-wmi by calling ACPI/WMI methods directly, eliminating workqueue overhead, eliminate double reporting of keyboard backlight. - Fix wake from USB failure on Bay Trail devices (intel_int0002_vgpio). - Notify intel_telemetry users when IPC1 device is not enabled. - Update various drivers with new laptop model IDs. - Update several intel drivers to use SPDX identifers and order headers alphabetically. * tag 'platform-drivers-x86-v4.20-1' of git://git.infradead.org/linux-platform-drivers-x86: (64 commits) HID: asus: only support backlight when it's not driven by WMI platform/x86: asus-wmi: export function for evaluating WMI methods platform/x86: asus-wmi: Only notify kbd LED hw_change by fn-key pressed platform/x86: wmi: declare device_type structure as constant platform/x86: ideapad: Add Y530-15ICH to no_hw_rfkill platform/x86: Add Intel AtomISP2 dummy / power-management driver platform/x86: touchscreen_dmi: Add min-x and min-y settings for various models platform/x86: touchscreen_dmi: Add info for the Onda V80 Plus v3 tablet platform/x86: touchscreen_dmi: Add info for the Trekstor Primetab T13B tablet platform/x86: intel_telemetry: Get rid of custom macro platform/x86: intel_telemetry: report debugfs failure MAINTAINERS: intel_telemetry: Update maintainers info platform/x86: Add LG Gram laptop special features driver platform/x86: asus-wmi: Simplify the keyboard brightness updating process platform/x86: touchscreen_dmi: Add info for the Trekstor Primebook C11 convertible platform/x86: mlx-platform: Properly use mlxplat_mlxcpld_msn201x_items MAINTAINERS: intel_pmc_core: Update MAINTAINERS firmware: dcdbas: include linux/io.h platform/x86: intel-wmi-thunderbolt: Add dynamic debugging platform/x86: intel-wmi-thunderbolt: Convert to use SPDX identifier ... |
|
|
Daniel Drake
|
ffb6ce7086 |
platform/x86: asus-wmi: export function for evaluating WMI methods
Export asus_wmi_evaluate_method() and related headers for use by other drivers. hid-asus is going to use this to avoid advertising that it has a keyboard backlight when the keyboard backlight is controlled via WMI. Signed-off-by: Daniel Drake <drake@endlessm.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> |
|
|
Jian-Hong Pan
|
29f6eb533c |
platform/x86: asus-wmi: Only notify kbd LED hw_change by fn-key pressed
Since commit
|
|
|
Jian-Hong Pan
|
9fe44fc98c |
platform/x86: asus-wmi: Simplify the keyboard brightness updating process
The original asus-wmi queues a work which calls the ACPI/WMI methods to update the keyboard LED brightness. Similar drivers - acer-wmi, dell-wmi-led just call the ACPI/WMI methods directly without workqueues. This patch simplifies the keyboard brightness updating process which calls the kbd_led_update function directly without workqueue in asus-wmi. Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> |
|
|
Lukas Wunner
|
125450f814 |
PCI: hotplug: Embed hotplug_slot
When the PCI hotplug core and its first user, cpqphp, were introduced in February 2002 with historic commit a8a2069f432c, cpqphp allocated a slot struct for its internal use plus a hotplug_slot struct to be registered with the hotplug core and linked the two with pointers: https://git.kernel.org/tglx/history/c/a8a2069f432c Nowadays, the predominant pattern in the tree is to embed ("subclass") such structures in one another and cast to the containing struct with container_of(). But it wasn't until July 2002 that container_of() was introduced with historic commit ec4f214232cf: https://git.kernel.org/tglx/history/c/ec4f214232cf pnv_php, introduced in 2016, did the right thing and embedded struct hotplug_slot in its internal struct pnv_php_slot, but all other drivers cargo-culted cpqphp's design and linked separate structs with pointers. Embedding structs is preferrable to linking them with pointers because it requires fewer allocations, thereby reducing overhead and simplifying error paths. Casting an embedded struct to the containing struct becomes a cheap subtraction rather than a dereference. And having fewer pointers reduces the risk of them pointing nowhere either accidentally or due to an attack. Convert all drivers to embed struct hotplug_slot in their internal slot struct. The "private" pointer in struct hotplug_slot thereby becomes unused, so drop it. Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com> # drivers/pci/hotplug/rpa* Acked-by: Sebastian Ott <sebott@linux.ibm.com> # drivers/pci/hotplug/s390* Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> # drivers/platform/x86 Cc: Len Brown <lenb@kernel.org> Cc: Scott Murray <scott@spiteful.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Oliver OHalloran <oliveroh@au1.ibm.com> Cc: Gavin Shan <gwshan@linux.vnet.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Corentin Chary <corentin.chary@gmail.com> Cc: Darren Hart <dvhart@infradead.org> |
|
|
Lukas Wunner
|
a7da21613c |
PCI: hotplug: Drop hotplug_slot_info
Ever since the PCI hotplug core was introduced in 2002, drivers had to allocate and register a struct hotplug_slot_info for every slot: https://git.kernel.org/tglx/history/c/a8a2069f432c Apparently the idea was that drivers furnish the hotplug core with an up-to-date card presence status, power status, latch status and attention indicator status as well as notify the hotplug core of changes thereof. However only 4 out of 12 hotplug drivers bother to notify the hotplug core with pci_hp_change_slot_info() and the hotplug core never made any use of the information: There is just a single macro in pci_hotplug_core.c, GET_STATUS(), which uses the hotplug_slot_info if the driver lacks the corresponding callback in hotplug_slot_ops. The macro is called when the user reads the attribute via sysfs. Now, if the callback isn't defined, the attribute isn't exposed in sysfs in the first place (see e.g. has_power_file()). There are only two situations when the hotplug_slot_info would actually be accessed: * If the driver defines ->enable_slot or ->disable_slot but not ->get_power_status. * If the driver defines ->set_attention_status but not ->get_attention_status. There is no driver doing the former and just a single driver doing the latter, namely pnv_php.c. Amend it with a ->get_attention_status callback. With that, the hotplug_slot_info becomes completely unused by the PCI hotplug core. But a few drivers use it internally as a cache: cpcihp uses it to cache the latch_status and adapter_status. cpqhp uses it to cache the adapter_status. pnv_php and rpaphp use it to cache the attention_status. shpchp uses it to cache all four values. Amend these drivers to cache the information in their private slot struct. shpchp's slot struct already contains members to cache the power_status and adapter_status, so additional members are only needed for the other two values. In the case of cpqphp, the cached value is only accessed in a single place, so instead of caching it, read the current value from the hardware. Caution: acpiphp, cpci, cpqhp, shpchp, asus-wmi and eeepc-laptop populate the hotplug_slot_info with initial values on probe. That code is herewith removed. There is a theoretical chance that the code has side effects without which the driver fails to function, e.g. if the ACPI method to read the adapter status needs to be executed at least once on probe. That seems unlikely to me, still maintainers should review the changes carefully for this possibility. Rafael adds: "I'm not aware of any case in which it will break anything, [...] but if that happens, it may be necessary to add the execution of the control methods in question directly to the initialization part." Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com> # drivers/pci/hotplug/rpa* Acked-by: Sebastian Ott <sebott@linux.ibm.com> # drivers/pci/hotplug/s390* Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> # drivers/platform/x86 Cc: Len Brown <lenb@kernel.org> Cc: Scott Murray <scott@spiteful.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Oliver OHalloran <oliveroh@au1.ibm.com> Cc: Gavin Shan <gwshan@linux.vnet.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Corentin Chary <corentin.chary@gmail.com> Cc: Darren Hart <dvhart@infradead.org> |
|
|
Lukas Wunner
|
81c4b5bf30 |
PCI: hotplug: Constify hotplug_slot_ops
Hotplug drivers cannot declare their hotplug_slot_ops const, making them attractive targets for attackers, because upon registration of a hotplug slot, __pci_hp_initialize() writes to the "owner" and "mod_name" members in that struct. Fix by moving these members to struct hotplug_slot and constify every driver's hotplug_slot_ops except for pciehp. pciehp constructs its hotplug_slot_ops at runtime based on the PCIe port's capabilities, hence cannot declare them const. It can be converted to __write_rarely once that's mainlined: http://www.openwall.com/lists/kernel-hardening/2016/11/16/3 Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com> # drivers/pci/hotplug/rpa* Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> # drivers/platform/x86 Cc: Len Brown <lenb@kernel.org> Cc: Scott Murray <scott@spiteful.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Oliver OHalloran <oliveroh@au1.ibm.com> Cc: Gavin Shan <gwshan@linux.vnet.ibm.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Corentin Chary <corentin.chary@gmail.com> Cc: Darren Hart <dvhart@infradead.org> |
|
|
Linus Torvalds
|
899fbc33fd |
platform-drivers-x86 for v4.19-1
The driver for Silead touchscreen configurations has been renamed from silead_dmi to touchscreen_dmi since it starts supporting other touchscreens which require some DMI quirks. At the same release cycle it gets expanded to cover cases for Chuwi Vi10, ONDA V891W, Connect Tablet 9, Onda V820w, and Cube KNote i1101 tablets. Another bunch of changes is related to Mellanox platform code to allow user space to communicate with Mellanox for system control and monitoring purposes. The driver notifies user on hotplug device signal receiving. ASUS WMI drivers recognize lid flip action on UX360, and correctly toggles airplane mode LED. In addition the keyboard backlight toggle gets support. ThinkPad ACPI driver enables support for calculator key (on at least P52). It also has been fixed to support three characters model designators, which are used for modern laptops. Earlier the battery, marked as BAT1, on ThinkPad laptops has not been configured properly, which is fixed. On the opposite the multi-battery configurations now probed correctly. Dell SMBIOS driver starts working on some Dell servers which do not support token interface. The regression with backlight detection has also been fixed. In order to support dock mode on some laptops, Intel virtual button driver has been fixed. The last but not least is the fix to Intel HID driver due to changes in Dell systems that prevented to use power button. The following is an automated git shortlog grouped by driver: acer-wmi: - Silence "unsupported" message a bit - refactor function has_cap asus-nb-wmi: - Add keymap entry for lid flip action on UX360 asus-wireless: - Fix uninitialized symbol usage - Toggle airplane mode LED asus-wmi: - Add keyboard backlight toggle support - Call led hw_changed API on kbd brightness change dell-laptop: - Fix backlight detection dell-smbios: - make a function and a pointer static dell-smbios-base: - Support systems without tokens dell-smbios-wmi: - make function dell_smbios_wmi_call static ideapad-laptop: - Add Y520-15IKBM and Y720-15IKBM to no_hw_rfkill - Apply no_hw_rfkill to Y20-15IKBM, too intel-hid: - Add support for Device Specific Methods intel_ips: - remove redundant variables slope and offset intel_pmc_core: - Add CNP SLPS0 debug registers intel_punit_ipc: - fix build errors intel-vbtn: - Add support for dock mode detection mlx-platform: - Fix copy-paste error in mlxplat_init() - Remove unused define - Change mlxreg-io configuration for MSN274x systems - Allow mlxreg-io driver activation for more systems - Add ASIC hotplug device configuration - Add new attribute for mlxreg-io sysfs interfaces - Add mlxreg-fan platform driver activation - Add documentation mlxreg-io sysfs interfaces - Add mlxreg-io platform driver activation platform/mellanox: - mlxreg-hotplug: Add hotplug hwmon uevent notification - mlxreg-hotplug: Improve mechanism of ASIC health discovery - Use 2-factor allocator calls - Introduce support for Mellanox register access driver thinkpad_acpi: - Fix multi-battery bug - extend battery quirk coverage - Support battery quirk - Proper model/release matching - Add support for calculator hotkey toshiba_acpi: - Fix defined but not used build warnings - Update KBD backlight LED on second gen laptops touchscreen_dmi: - Rename silead_dmi to touchscreen_dmi - Add touchscreen info for the Chuwi Vi10 tablet - Sort entries alphabetically - Rename trekstor entries - Add info for the Cube KNote i1101 tablet - Add info for the Onda V820w tablet - Add info for the "Connect Tablet 9" tablet - Add info for the ONDA V891W Dual OS tablet wmi: - Do not mix pages and kmalloc -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEhiZOUlnC9oKN3n3AmT3/83c5Sy0FAlt9wVgACgkQmT3/83c5 Sy3Jdg//WnEJZx7+zEsO+3dJnQGN4Fur6xhP79subRhZPFNTZ+D5vMHC9DL8ZQYx U8Kz1ilxCC5HuOo2S1BlzRG+h6ztMSYIFo2H8KRdygOqALEH7hoStPEGYdZcQ0qE 6SKa4MnRw46UcGPij3f6STPiOjicPaLoUSTXZmi2dbmy6sJZMMJamvnRhezgEgJl rA6xvg+tKNBK2jwLpAVfLhy4Btd6LCE4EGgkYdnytOM9ByHLDsTWCZxd/9h7WjPa L8Zd8rftrazWF6X2tAhpXtUcMPg/D4lfL5HHaMmL9FioycQ88WqDBZN5sEWdIbaP OfaMbcbhCIrrHoMNdq0544IgqRQahX+m3VjSkVf3/Aj5AU0nUJMBWSpGHAs7UCSN 8i8M2jdpVW7CVxA+4OU2l19udKrQzXutfXXhVYX0B3hKCkH7TBKax+m/ev9n2yvZ KoTdSJ/4bB6iGhXF8/MA6H72k0g972d4WXozbTusiBO9grqgU1EIe5bYZ4y+FkJL 9gtK1xgtDJB7J8U14lpGC+zKhcYn1Mn3Iq4i5HD3sfnKsVGGWJIjRZsDtALD2RKT OQe7S8xhQWqsUZFGNflWL+8oHyXOHGD5Q8b/YI92ubriyAzh3I3Ybt/atk20vdmG QfKU46suOoOUwcAs00v13oo+9s9GatekXEjGgdRJ14vgzdgx3lc= =vRud -----END PGP SIGNATURE----- Merge tag 'platform-drivers-x86-v4.19-1' of git://git.infradead.org/linux-platform-drivers-x86 Pull x86 platform driver updates from Andy Shevchenko: - The driver for Silead touchscreen configurations has been renamed from silead_dmi to touchscreen_dmi since it starts supporting other touchscreens which require some DMI quirks It also gets expanded to cover cases for Chuwi Vi10, ONDA V891W, Connect Tablet 9, Onda V820w, and Cube KNote i1101 tablets. - Another bunch of changes is related to Mellanox platform code to allow user space to communicate with Mellanox for system control and monitoring purposes. The driver notifies user on hotplug device signal receiving. - ASUS WMI drivers recognize lid flip action on UX360, and correctly toggles airplane mode LED. In addition the keyboard backlight toggle gets support. - ThinkPad ACPI driver enables support for calculator key (on at least P52). It also has been fixed to support three characters model designators, which are used for modern laptops. Earlier the battery, marked as BAT1, on ThinkPad laptops has not been configured properly, which is fixed. On the opposite the multi-battery configurations now probed correctly. - Dell SMBIOS driver starts working on some Dell servers which do not support token interface. The regression with backlight detection has also been fixed. In order to support dock mode on some laptops, Intel virtual button driver has been fixed. The last but not least is the fix to Intel HID driver due to changes in Dell systems that prevented to use power button. * tag 'platform-drivers-x86-v4.19-1' of git://git.infradead.org/linux-platform-drivers-x86: (47 commits) platform/x86: acer-wmi: Silence "unsupported" message a bit platform/x86: intel_punit_ipc: fix build errors platform/x86: ideapad: Add Y520-15IKBM and Y720-15IKBM to no_hw_rfkill platform/x86: asus-nb-wmi: Add keymap entry for lid flip action on UX360 platform/x86: acer-wmi: refactor function has_cap platform/x86: thinkpad_acpi: Fix multi-battery bug platform/x86: thinkpad_acpi: extend battery quirk coverage platform/x86: touchscreen_dmi: Add info for the Cube KNote i1101 tablet platform/x86: mlx-platform: Fix copy-paste error in mlxplat_init() platform/x86: mlx-platform: Remove unused define platform/x86: mlx-platform: Change mlxreg-io configuration for MSN274x systems Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces platform/x86: mlx-platform: Allow mlxreg-io driver activation for more systems platform/x86: mlx-platform: Add ASIC hotplug device configuration platform/mellanox: mlxreg-hotplug: Add hotplug hwmon uevent notification platform/mellanox: mlxreg-hotplug: Improve mechanism of ASIC health discovery platform/x86: mlx-platform: Add mlxreg-fan platform driver activation platform/x86: dell-laptop: Fix backlight detection platform/x86: toshiba_acpi: Fix defined but not used build warnings platform/x86: thinkpad_acpi: Support battery quirk ... |
|
|
Lukas Wunner
|
51bbf9bee3 |
PCI: hotplug: Demidlayer registration with the core
When a hotplug driver calls pci_hp_register(), all steps necessary for
registration are carried out in one go, including creation of a kobject
and addition to sysfs. That's a problem for pciehp once it's converted
to enable/disable the slot exclusively from the IRQ thread: The thread
needs to be spawned after creation of the kobject (because it uses the
kobject's name), but before addition to sysfs (because it will handle
enable/disable requests submitted via sysfs).
pci_hp_deregister() does offer a ->release callback that's invoked
after deletion from sysfs and before destruction of the kobject. But
because pci_hp_register() doesn't offer a counterpart, hotplug drivers'
->probe and ->remove code becomes asymmetric, which is error prone
as recently discovered use-after-free bugs in pciehp's ->remove hook
have shown.
In a sense, this appears to be a case of the midlayer antipattern:
"The core thesis of the "midlayer mistake" is that midlayers are
bad and should not exist. That common functionality which it is
so tempting to put in a midlayer should instead be provided as
library routines which can [be] used, augmented, or ignored by
each bottom level driver independently. Thus every subsystem
that supports multiple implementations (or drivers) should
provide a very thin top layer which calls directly into the
bottom layer drivers, and a rich library of support code that
eases the implementation of those drivers. This library is
available to, but not forced upon, those drivers."
-- Neil Brown (2009), https://lwn.net/Articles/336262/
The presence of midlayer traits in the PCI hotplug core might be ascribed
to its age: When it was introduced in February 2002, the blessings of a
library approach might not have been well known:
https://git.kernel.org/tglx/history/c/a8a2069f432c
For comparison, the driver core does offer split functions for creating
a kobject (device_initialize()) and addition to sysfs (device_add()) as
an alternative to carrying out everything at once (device_register()).
This was introduced in October 2002:
https://git.kernel.org/tglx/history/c/8b290eb19962
The odd ->release callback in the PCI hotplug core was added in 2003:
https://git.kernel.org/tglx/history/c/69f8d663b595
Clearly, a library approach would not force every hotplug driver to
implement a ->release callback, but rather allow the driver to remove
the sysfs files, release its data structures and finally destroy the
kobject. Alternatively, a driver may choose to remove everything with
pci_hp_deregister(), then release its data structures.
To this end, offer drivers pci_hp_initialize() and pci_hp_add() as a
split-up version of pci_hp_register(). Likewise, offer pci_hp_del()
and pci_hp_destroy() as a split-up version of pci_hp_deregister().
Eliminate the ->release callback and move its code into each driver's
teardown routine.
Declare pci_hp_deregister() void, in keeping with the usual kernel
pattern that enablement can fail, but disablement cannot. It only
returned an error if the caller passed in a NULL pointer or a slot which
has never or is no longer registered or is sharing its name with another
slot. Those would be bugs, so WARN about them. Few hotplug drivers
actually checked the return value and those that did only printed a
useless error message to dmesg. Remove that.
For most drivers the conversion was straightforward since it doesn't
matter whether the code in the ->release callback is executed before or
after destruction of the kobject. But in the case of ibmphp, it was
unclear to me whether setting slot_cur->ctrl and slot_cur->bus_on to
NULL needs to happen before the kobject is destroyed, so I erred on
the side of caution and ensured that the order stays the same. Another
nontrivial case is pnv_php, I've found the list and kref logic difficult
to understand, however my impression was that it is safe to delete the
list element and drop the references until after the kobject is
destroyed.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> # drivers/platform/x86
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: Scott Murray <scott@spiteful.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Gavin Shan <gwshan@linux.vnet.ibm.com>
Cc: Sebastian Ott <sebott@linux.vnet.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Corentin Chary <corentin.chary@gmail.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
|
|
|
Chris Chiu
|
ed99d29b2b |
platform/x86: asus-wmi: Add keyboard backlight toggle support
Some ASUS laptops like UX550GE has hotkey (Fn+F7) for keyboard backlight toggle which would emit the scan code 0xc7 each keypress. On the UX550GE, the max keyboard brightness level is 3 so the toggle would not be simply on/off the led but need to be cyclic. Per ASUS spec, it should increment the brightness for each keypress, then toggle(off) the LED when it already reached the max level. Signed-off-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> |
|
|
Chris Chiu
|
dbb3d78f61 |
platform/x86: asus-wmi: Call led hw_changed API on kbd brightness change
Make asus-wmi notify on hotkey kbd brightness changes, listen for brightness events and update the brightness directly in the driver. Create new do_kbd_led_set function for in-driver update, and leave kbd_led_set for original led_classdev call path. Update the brightness by led_classdev_notify_brightness_hw_changed. This will allow userspace to monitor (poll) for brightness changes on the LED without reporting via input keymapping. Signed-off-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> |
|
|
João Paulo Rechi Vita
|
cf48bf9eee |
platform/x86: asus-wmi: Fix NULL pointer dereference
Do not perform the rfkill cleanup routine when (asus->driver->wlan_ctrl_by_user && ashs_present()) is true, since nothing is registered with the rfkill subsystem in that case. Doing so leads to the following kernel NULL pointer dereference: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff816c7348>] __mutex_lock_slowpath+0x98/0x120 PGD 1a3aa8067 PUD 1a3b3d067 PMD 0 Oops: 0002 [#1] PREEMPT SMP Modules linked in: bnep ccm binfmt_misc uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core hid_a4tech videodev x86_pkg_temp_thermal intel_powerclamp coretemp ath3k btusb btrtl btintel bluetooth kvm_intel snd_hda_codec_hdmi kvm snd_hda_codec_realtek snd_hda_codec_generic irqbypass crc32c_intel arc4 i915 snd_hda_intel snd_hda_codec ath9k ath9k_common ath9k_hw ath i2c_algo_bit snd_hwdep mac80211 ghash_clmulni_intel snd_hda_core snd_pcm snd_timer cfg80211 ehci_pci xhci_pci drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm xhci_hcd ehci_hcd asus_nb_wmi(-) asus_wmi sparse_keymap r8169 rfkill mxm_wmi serio_raw snd mii mei_me lpc_ich i2c_i801 video soundcore mei i2c_smbus wmi i2c_core mfd_core CPU: 3 PID: 3275 Comm: modprobe Not tainted 4.9.34-gentoo #34 Hardware name: ASUSTeK COMPUTER INC. K56CM/K56CM, BIOS K56CM.206 08/21/2012 task: ffff8801a639ba00 task.stack: ffffc900014cc000 RIP: 0010:[<ffffffff816c7348>] [<ffffffff816c7348>] __mutex_lock_slowpath+0x98/0x120 RSP: 0018:ffffc900014cfce0 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff8801a54315b0 RCX: 00000000c0000100 RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff8801a54315b4 RBP: ffffc900014cfd30 R08: 0000000000000000 R09: 0000000000000002 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801a54315b4 R13: ffff8801a639ba00 R14: 00000000ffffffff R15: ffff8801a54315b8 FS: 00007faa254fb700(0000) GS:ffff8801aef80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000001a3b1b000 CR4: 00000000001406e0 Stack: ffff8801a54315b8 0000000000000000 ffffffff814733ae ffffc900014cfd28 ffffffff8146a28c ffff8801a54315b0 0000000000000000 ffff8801a54315b0 ffff8801a66f3820 0000000000000000 ffffc900014cfd48 ffffffff816c73e7 Call Trace: [<ffffffff814733ae>] ? acpi_ut_release_mutex+0x5d/0x61 [<ffffffff8146a28c>] ? acpi_ns_get_node+0x49/0x52 [<ffffffff816c73e7>] mutex_lock+0x17/0x30 [<ffffffffa00a3bb4>] asus_rfkill_hotplug+0x24/0x1a0 [asus_wmi] [<ffffffffa00a4421>] asus_wmi_rfkill_exit+0x61/0x150 [asus_wmi] [<ffffffffa00a49f1>] asus_wmi_remove+0x61/0xb0 [asus_wmi] [<ffffffff814a5128>] platform_drv_remove+0x28/0x40 [<ffffffff814a2901>] __device_release_driver+0xa1/0x160 [<ffffffff814a29e3>] device_release_driver+0x23/0x30 [<ffffffff814a1ffd>] bus_remove_device+0xfd/0x170 [<ffffffff8149e5a9>] device_del+0x139/0x270 [<ffffffff814a5028>] platform_device_del+0x28/0x90 [<ffffffff814a50a2>] platform_device_unregister+0x12/0x30 [<ffffffffa00a4209>] asus_wmi_unregister_driver+0x19/0x30 [asus_wmi] [<ffffffffa00da0ea>] asus_nb_wmi_exit+0x10/0xf26 [asus_nb_wmi] [<ffffffff8110c692>] SyS_delete_module+0x192/0x270 [<ffffffff810022b2>] ? exit_to_usermode_loop+0x92/0xa0 [<ffffffff816ca560>] entry_SYSCALL_64_fastpath+0x13/0x94 Code: e8 5e 30 00 00 8b 03 83 f8 01 0f 84 93 00 00 00 48 8b 43 10 4c 8d 7b 08 48 89 63 10 41 be ff ff ff ff 4c 89 3c 24 48 89 44 24 08 <48> 89 20 4c 89 6c 24 10 eb 1d 4c 89 e7 49 c7 45 08 02 00 00 00 RIP [<ffffffff816c7348>] __mutex_lock_slowpath+0x98/0x120 RSP <ffffc900014cfce0> CR2: 0000000000000000 ---[ end trace 8d484233fa7cb512 ]--- note: modprobe[3275] exited with preempt_count 2 https://bugzilla.kernel.org/show_bug.cgi?id=196467 Reported-by: red.f0xyz@gmail.com Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> |
|
|
Wolfram Sang
|
d605ca29c3 |
platform/x86: Simplify getting .drvdata
We should get drvdata from struct device directly. Going via platform_device is an unneeded step back and forth. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org> |
|
|
Maxime Bellengé
|
4c05984459 |
platform/x86: asus-wmi: Add lightbar led support
Some Asus laptops (ROG series for example) are provided with a lightbar behind the monitor. This patch make possible to switch it on and off. This lightbar works exactly like any other led. Signed-off-by: Maxime Bellengé <maxime.bellenge@gmail.com> [dvhart: fix commit message format and variable declaration order] Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org> |
|
|
Pali Rohár
|
0fe5726121 |
platform/x86: asus-wmi: Evaluate wmi method with instance number 0x0
According to available DSDT dump from Asus machine, there is the only one instance of the WMI GUID 97845ED0-4E6D-11DE-8A39-0800200C9A66 and so it is 0x0. Moreover corresponding method WMBC does not check Arg0 (instance number) at all. DSDT dump is available at: https://lwn.net/Articles/391249/ _WDG dump: 0xD0, 0x5E, 0x84, 0x97, 0x6D, 0x4E, 0xDE, 0x11, 0x8A, 0x39, 0x08, 0x00, 0x20, 0x0C, 0x9A, 0x66, 0x42, 0x43, // Object ID "BC" = method "WMBC" 0x01, // Instance count 0x02, // Flags Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> |
|
|
Arvind Yadav
|
e90d9ba837 |
platform/x86: asus-wmi: constify attribute_group structures.
attribute_groups are not supposed to change at runtime. All functions working with attribute_groups provided by <linux/sysfs.h> work with const attribute_group. So mark the non-const structs as const. File size before: text data bss dec hex filename 13140 840 1 13981 369d drivers/platform/x86/asus-wmi.o File size After adding 'const': text data bss dec hex filename 13268 712 1 13981 368d drivers/platform/x86/asus-wmi.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org> |
|
|
Oleksij Rempel
|
e9b6151868 |
platform/x86: asus-wmi: try to set als by default
some laptops, for example ASUS UX330UAK, have brocken als_get function
but working als_set funktion. In this case, ALS will stay turned off.
Method (WMNB, 3, Serialized)
{
...
If (Local0 == 0x53545344)
{
...
If (IIA0 == 0x00050001)
{
If (!ALSP)
{
Return (0x02)
}
Local0 = (GALS & 0x10) <<<---- bug,
should be: (GALS () & 0x10)
If (Local0)
{
Return (0x00050001)
}
Else
{
Return (0x00050000)
}
}
.....
If (Local0 == 0x53564544)
{
...
If (IIA0 == 0x00050001)
{
Return (ALSC (IIA1))
}
......
Method (GALS, 0, NotSerialized)
{
Local0 = Zero
Local0 |= 0x20
If (ALAE)
{
Local0 |= 0x10
}
Local1 = 0x0A
Local1 <<= 0x08
Local0 |= Local1
Return (Local0)
}
Since it works without problems on Windows I assume ASUS WMI driver for Win
never trying to get ALS state, and instead it is setting it by default to ON.
This patch will do the same. Turn ALS on by default.
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
|
Jérémy Lefaure
|
a8fe342856 |
platform/x86: asus-wmi: fix cpufv sysfs file permission
The cpufv sysfs file is defined as readable by anyone even if the attribute does not have a show function. The result of every read is an IO error. This file should be write only. Signed-off-by: Jérémy Lefaure <jeremy.lefaure@lse.epita.fr> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> |
|
|
Michał Kępień
|
c2ef3a1c97 |
platform/x86: asus-wmi: remove sparse_keymap_free() calls
As sparse_keymap_setup() now uses a managed memory allocation for the keymap copy it creates, the latter is freed automatically. Remove all calls to sparse_keymap_free(). Signed-off-by: Michał Kępień <kernel@kempniu.pl> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> |
|
|
João Paulo Rechi Vita
|
d1c4e9bf73 |
platform/x86: asus-wmi: Remove quirk_no_rfkill
With the detection introduced in the previous patches, we don't need these static DMI-based quirks anymore. This reverts the following commits: |
|
|
João Paulo Rechi Vita
|
71050ae7bf |
platform/x86: asus-wmi: Detect quirk_no_rfkill from the DSDT
Some Asus laptops that have an airplane-mode indicator LED, also have
the WMI WLAN user bit set, and the following bits in their DSDT:
Scope (_SB)
{
(...)
Device (ATKD)
{
(...)
Method (WMNB, 3, Serialized)
{
(...)
If (LEqual (IIA0, 0x00010002))
{
OWGD (IIA1)
Return (One)
}
}
}
}
So when asus-wmi uses ASUS_WMI_DEVID_WLAN_LED (0x00010002) to store the
wlan state, it drives the airplane-mode indicator LED (through the call
to OWGD) in an inverted fashion: the LED is ON when airplane mode is OFF
(since wlan is ON), and vice-versa.
This commit skips registering RFKill switches at all for these laptops,
to allow the asus-wireless driver to drive the airplane mode LED
correctly through the ASHS ACPI device. Relying on the presence of ASHS
and ASUS_WMI_DSTS_USER_BIT avoids adding DMI-based quirks for at least
21 different laptops.
Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
|
Kai-Chuan Hsieh
|
8023eff10e |
platform/x86: asus-wmi: Set specified XUSB2PR value for X550LB
The bluetooth adapter Atheros AR3012 can't be enumerated
and make the bluetooth function broken.
T: Bus=02 Lev=01 Prnt=01 Port=05 Cnt=02 Dev#= 5 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=13d3 ProdID=3362 Rev=00.02
S: Manufacturer=Atheros Communications
S: Product=Bluetooth USB Host Controller
S: SerialNumber=Alaska Day 2006
C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
The error is:
usb 2-6: device not accepting address 7, error -62
usb usb2-port6: unable to enumerate USB device
It is caused by adapter's connected port is mapped to xHC
controller, but the xHCI is not supported by the usb device.
The output of 'sudo lspci -nnxxx -s 00:14.0':
00:14.0 USB controller [0c03]: Intel Corporation 8 Series USB xHCI HC [8086:9c31] (rev 04)
00: 86 80 31 9c 06 04 90 02 04 30 03 0c 00 00 00 00
10: 04 00 a0 f7 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 1f 20
30: 00 00 00 00 70 00 00 00 00 00 00 00 0b 01 00 00
40: fd 01 36 80 89 c6 0f 80 00 00 00 00 00 00 00 00
50: 5f 2e ce 0f 00 00 00 00 00 00 00 00 00 00 00 00
60: 30 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 01 80 c2 c1 08 00 00 00 00 00 00 00 00 00 00 00
80: 05 00 87 00 0c a0 e0 fe 00 00 00 00 a1 41 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 01 04 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 0f 00 03 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 03 c0 30 00 00 00 00 00 03 0c 00 00 00 00 00 00
d0: f9 01 00 00 f9 01 00 00 0f 00 00 00 0f 00 00 00
e0: 00 08 00 00 00 00 00 00 00 00 00 00 d8 d8 00 00
f0: 00 00 00 00 00 00 00 00 b1 0f 04 08 00 00 00 00
By referencing Intel Platform Controller Hub(PCH) datasheet,
the xHC USB 2.0 Port Routing(XUSB2PR) at offset 0xD0-0xD3h
decides the setting of mapping the port to EHCI controller or
xHC controller. And the port mapped to xHC will enable xHCI
during bus resume.
The setting of disabling bluetooth adapter's connected port is
0x000001D9. The value can be obtained by few times 1 bit flip
operation. The suited configuration should have the 'lsusb -t'
result with bluetooth using ehci:
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/9p, 480M
|__ Port 5: Dev 2, If 0, Class=Video, Driver=uvcvideo, 480M
|__ Port 5: Dev 2, If 1, Class=Video, Driver=uvcvideo, 480M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/8p, 480M
|__ Port 6: Dev 3, If 0, Class=Wireless, Driver=btusb, 12M
|__ Port 6: Dev 3, If 1, Class=Wireless, Driver=btusb, 12M
Signed-off-by: Kai-Chuan Hsieh <kai.chiuan@gmail.com>
Acked-by: Corentin Chary <corentin.chary@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
[andy: resolve merge conflict in asus-wmi.h]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
|
zino lin
|
999d4376c6 |
platform/x86: asus-wmi: fix asus ux303ub brightness issue
acpi_video0 doesn't work, asus-wmi brightness interface doesn't work, too. So, we use native brightness interface to handle the brightness adjustion, and add quirk_asus_ux303ub. Signed-off-by: zino lin <linzino7@gmail.com> Acked-by: Corentin Chary <corentin.chary@gmail.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com> |
|
|
João Paulo Rechi Vita
|
a977e59c0c |
asus-wmi: Create quirk for airplane_mode LED
Some Asus laptops that have an airplane-mode indicator LED, also have
the WMI WLAN user bit set, and the following bits in their DSDT:
Scope (_SB)
{
(...)
Device (ATKD)
{
(...)
Method (WMNB, 3, Serialized)
{
(...)
If (LEqual (IIA0, 0x00010002))
{
OWGD (IIA1)
Return (One)
}
}
}
}
So when asus-wmi uses ASUS_WMI_DEVID_WLAN_LED (0x00010002) to store the
wlan state, it drives the airplane-mode indicator LED (through the call
to OWGD) in an inverted fashion: the LED is ON when airplane mode is OFF
(since wlan is ON), and vice-versa.
This commit creates a quirk to not register a RFKill switch at all for
these laptops, to allow the asus-wireless driver to drive the airplane
mode LED correctly through the ASHS ACPI device. It also adds a match to
that quirk for the Asus X555UB, which is affected by this problem.
Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Reviewed-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
|
Oleksij Rempel
|
aca234f637 |
asus-wmi: provide access to ALS control
Asus Zenbook ux31a is providing ACPI0008 interface for ALS (Ambient Light Sensor), which is accessible for OS => Win 7. This sensor can be used with iio/acpi-als driver. Since it is disabled by default, we should use asus-wmi interface to enable it. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Darren Hart <dvhart@linux.intel.com> |
|
|
Geliang Tang
|
f5b3f66548 |
asus-wmi: drop to_platform_driver macro
to_platform_driver has been defined in platform_device.h, so drop this repetitive macro in asus-wmi.c. Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com> |
|
|
Linus Torvalds
|
4bfc89d26a |
platform-drivers-x86 for 4.4-2
Support for the unfortunately rather unique ESC key on the Ideapad Yoga 3 and two DMI matches for rfkill support. Solitary fix for potential missed errors for asus-wmi. Downgrade a thinkpad_acpi message to info. asus-wmi: - fix error handling in store_sys_wmi() ideapad-laptop: - Add Lenovo Yoga 900 to no_hw_rfkill dmi list - include Yoga 3 1170 in add rfkill whitelist - add support for Yoga 3 ESC key thinkpad_acpi: - Don't yell on unsupported brightness interfaces -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQEcBAABAgAGBQJWRlcDAAoJEKbMaAwKp364OAoH/0negZF4jX/rtPm7mhCLv1sJ ojzT1JAANQCC/FQjOV7jo4uuvqb3aPbFi7n4Jgk1YTD1TIhRuhx5on9VDkkRW4vI /CmEgZc8BKNWFG7VTC5zbrddeqxLDVj8jPkRqxMmqcl6v9aQRmhkZeK2HEjTcF5W EKPS4BgOHM6YNDEoBZ2Ix6jmJn96fWKPrZJxj8K7jWzXhvMmh75RZ8Wk1MZAmzs7 CSjNJInmnTEJrVjjCoMp7VlXoTakbIwtsarA+hDzqorhnYK+0bpPT69oHGXgQaA6 KJk5aY/o8Xnzez93xC61TN1aCBXg7BLsUtygsQpsd1nJfwoepYswGgKgeT7Ai/8= =K579 -----END PGP SIGNATURE----- Merge tag 'platform-drivers-x86-v4.4-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86 Pull another x86 platform driver update from Darren Hart: "Support for the unfortunately rather unique ESC key on the Ideapad Yoga 3 and two DMI matches for rfkill support. Solitary fix for potential missed errors for asus-wmi. Downgrade a thinkpad_acpi message to info. asus-wmi: - fix error handling in store_sys_wmi() ideapad-laptop: - Add Lenovo Yoga 900 to no_hw_rfkill dmi list - include Yoga 3 1170 in add rfkill whitelist - add support for Yoga 3 ESC key thinkpad_acpi: - Don't yell on unsupported brightness interfaces" * tag 'platform-drivers-x86-v4.4-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: asus-wmi: fix error handling in store_sys_wmi() ideapad-laptop: Add Lenovo Yoga 900 to no_hw_rfkill dmi list ideapad-laptop: include Yoga 3 1170 in add rfkill whitelist ideapad-laptop: add support for Yoga 3 ESC key thinkpad_acpi: Don't yell on unsupported brightness interfaces |
|
|
Linus Torvalds
|
baf51c4392 |
Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux
Pull thermal updates from Zhang Rui: - Implement generic devfreq cooling mechanism through frequency reduction for devices using devfreq. From Ørjan Eide and Javi Merino. - Introduce OMAP3 support on TI SoC thermal driver. From Pavel Mack and Eduardo Valentin. - A bounch of small fixes on devfreq_cooling, Exynos, IMX, Armada, and Rockchip thermal drivers. * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (24 commits) thermal: exynos: Directly return 0 instead of using local ret variable thermal: exynos: Remove unneeded semicolon thermal: exynos: Use IS_ERR() because regulator cannot be NULL thermal: exynos: Fix first temperature read after registering sensor thermal: exynos: Fix unbalanced regulator disable on probe failure devfreq_cooling: return on allocation failure thermal: rockchip: support the sleep pinctrl state to avoid glitches in s2r dt-bindings: rockchip-thermal: Add the pinctrl states in this document thermal: devfreq_cooling: Make power a u64 thermal: devfreq_cooling: use a thermal_cooling_device for register and unregister thermal: underflow bug in imx_set_trip_temp() thermal: armada: Fix possible overflow in the Armada 380 thermal sensor formula thermal: imx: register irq handler later in probe thermal: rockhip: fix setting thermal shutdown polarity thermal: rockchip: fix handling of invalid readings devfreq_cooling: add trace information thermal: Add devfreq cooling PM / OPP: get the voltage for all OPPs tools/thermal: tmon: use pkg-config also for CFLAGS linux/thermal.h: rename KELVIN_TO_CELSIUS to DECI_KELVIN_TO_CELSIUS ... |
|
|
Dan Carpenter
|
b829834016 |
asus-wmi: fix error handling in store_sys_wmi()
The asus_wmi_get_devstate_simple() returns 0-1 on success. In theory according to static checkers, it can return either -EIO or -ENODEV on failure. Currently the error handling code only handles -ENODEV and -EIO is treated as success. Let's make it handle the -EIO error as well. It's possible that it can't actually return -EIO and this patch is not needed but in that case this patch is harmless and silences a static checker warning so it's still worth it. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com> |
|
|
Rasmus Villemoes
|
e866a2e395 |
linux/thermal.h: rename KELVIN_TO_CELSIUS to DECI_KELVIN_TO_CELSIUS
The macros KELVIN_TO_CELSIUS and CELSIUS_TO_KELVIN actually convert between deciKelvins and Celsius, so rename them to reflect that. While at it, use a statement expression in DECI_KELVIN_TO_CELSIUS to prevent expanding the argument multiple times and get rid of a few casts. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> |
|
|
Oleksij Rempel
|
307340493f |
asus-wmi: restore kbd led level after resume
Afters suspend/resume cycle with closed lid the kbd backlight level is lost. This patch will will restore this value to last known level. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Darren Hart <dvhart@linux.intel.com> |
|
|
Linus Torvalds
|
05fde26a94 |
platform-drivers-x86 got 4.2
asus-wmi: Fan control
dell*: Add Dell airplane mode switch driver
ideapad-laptop: Platform rfkill fixes, and regression fix
pvpanic: Handle missing _STA correctly
toshiba*: Rafactor bluetooth support, haps documentation, driver cleanup
other: Use acpi_video_unregister_backlight instead of acpi_video_unregister in
serveral drivers.
Orphan msi-wmi.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVks/CAAoJEKbMaAwKp364M5kH/06QhbX8NBSrzZk96jTmiFrP
pSO1Z6Jwnm3SL/phUAaRusNVWh0ZsaezvQ6M3Lnsjeh+07qPsF+lag+nHGYXSrQJ
3LVOdqXAojnvPIPNxaTSXylypF776WqFcWwzksICaJo/RA8mE/I4S0A6PMzujivV
6aAZEApED9EFWgnBWz8yYDscTUF7Bypy5/6uNtI0CRXFwUw1C05f5LW5J/qPpIMW
lerSLJKQSpuGbK3db4TqlwJOCZXdSb3HgzLAQKvzhRCukyEdA3zL76Jj6DfVhE9d
nKybk30qYVy1smEWH/I2jMSrxcjY56pRnGhanc/U5gSo9WARGjed/XKtbkFqpSQ=
=9RCr
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v4.2-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86
Pull x86 platform driver updates from Darren Hart:
"Fairly routine update for platform-drivers-x86.
Mostly fixes and cleanups, with a significant refactoring of toshiba*
drivers. Includes the addition of the dell-rbtn driver.
Details:
asus-wmi:
- fan control
dell*:
- add Dell airplane mode switch driver
ideapad-laptop:
- platform rfkill fixes, and regression fix
pvpanic:
- handle missing _STA correctly
toshiba*:
- rafactor bluetooth support
- haps documentation
- driver cleanup
other:
- Use acpi_video_unregister_backlight instead of
acpi_video_unregister in serveral drivers.
- Orphan msi-wmi.
* tag 'platform-drivers-x86-v4.2-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: (24 commits)
MAINTAINERS: Orphan x86 driver msi-wmi
ideapad: fix software rfkill setting
dell-laptop: Use dell-rbtn instead i8042 filter when possible
dell-rbtn: Export notifier for other kernel modules
dell-rbtn: Dell Airplane Mode Switch driver
samsung-laptop: Use acpi_video_unregister_backlight instead of acpi_video_unregister
asus-wmi: Use acpi_video_unregister_backlight instead of acpi_video_unregister
apple_gmux: Use acpi_video_unregister_backlight instead of acpi_video_unregister
pvpanic: handle missing _STA correctly
ideapad_laptop: Lenovo G50-30 fix rfkill reports wireless blocked
asus-wmi: add fan control
Documentation/ABI: Add file describing the sysfs entries for toshiba_haps
toshiba_haps: Make use of DEVICE_ATTR_{RW, WO} macros
toshiba_haps: Replace sscanf with kstrtoint
toshiba_acpi: Bump driver version to 0.22
toshiba_acpi: Remove TOS_FAILURE check from some functions
toshiba_acpi: Comments cleanup
toshiba_acpi: Rename hci_{read, write}1 functions
toshiba_acpi: Remove no longer needed hci_{read, write}2 functions
toshiba_bluetooth: Change BT status message to debug
...
|
|
|
Hans de Goede
|
62c4aa1a8d |
asus-wmi: Port to new backlight interface selection API
Port the backlight selection logic to the new backlight interface selection API. This commit also removes various obsolete pr_xxx messages related to backlight interface selection. These are obsolete because they assume there is only a vendor or acpi backlight driver and no other choice. Also they are not necessary, if the user wants to know which backlight interfaces are registered a simple "ls /sys/class/backlight" suffices. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
|
|
Hans de Goede
|
4c27febf8e |
asus-wmi: Use acpi_video_unregister_backlight instead of acpi_video_unregister
acpi_video_unregister() not only unregisters the acpi-video backlight interface but also unregisters the acpi video bus event listener, causing e.g. brightness hotkey presses to no longer generate keypress events. The unregistering of the acpi video bus event listener usually is undesirable, which by itself is a good reason to switch to acpi_video_unregister_backlight(). Another problem with using acpi_video_unregister() rather then using acpi_video_unregister_backlight() is that on systems with an intel video opregion (most systems) and a wmi_backlight_power quirk, whether or not the acpi video bus event listener actually gets unregistered depends on module load ordering: Scenario a: 1) acpi/video.ko gets loaded (*), does not do acpi_video_register as there is an intel opregion. 2) intel.ko gets loaded, calls acpi_video_register() which registers both the listener and the acpi backlight interface 3) asus-wmi.ko gets loaded, calls acpi_video_unregister() causing both the listener and the acpi backlight interface to unregister Scenario b: 1) acpi/video.ko gets loaded (*), does not do acpi_video_register as there is an intel opregion. 2) asus-wmi.ko gets loaded, calls acpi_video_dmi_promote_vendor(), calls acpi_video_unregister(), which is a nop since acpi_video_register has not yet been called 2) intel.ko gets loaded, calls acpi_video_register() which registers the listener, but does not register the acpi backlight interface due to the call to the preciding call to acpi_video_dmi_promote_vendor() *) acpi/video.ko always loads first as both other modules depend on it. So we end up with or without an acpi video bus event listener depending on module load ordering, not good. Switching to using acpi_video_unregister_backlight() means that independ of ordering we will always have an acpi video bus event listener fixing this. Note that this commit means that systems without an intel video opregion, and systems which were hitting scenario a wrt module load ordering, are now getting an acpi video bus event listener while before they were not! On some systems this may cause the brightness hotkeys to start generating keypresses while before they were not (good), while on other systems this may cause the brightness hotkeys to generate multiple keypress events for a single press (not so good). Since on most systems the acpi video bus is the canonical source for brightness events I believe that the latter case will needs to be handled on a case by case basis by filtering out the duplicate keypresses at the other source for them. Cc: Corentin Chary <corentin.chary@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
|
|
Hans de Goede
|
5f77065874 |
asus-wmi: Use acpi_video_unregister_backlight instead of acpi_video_unregister
acpi_video_unregister() not only unregisters the acpi-video backlight interface but also unregisters the acpi video bus event listener, causing e.g. brightness hotkey presses to no longer generate keypress events. The unregistering of the acpi video bus event listener usually is undesirable, which by itself is a good reason to switch to acpi_video_unregister_backlight(). Another problem with using acpi_video_unregister() rather then using acpi_video_unregister_backlight() is that on systems with an intel video opregion (most systems) and a wmi_backlight_power quirk, whether or not the acpi video bus event listener actually gets unregistered depends on module load ordering: Scenario a: 1) acpi/video.ko gets loaded (*), does not do acpi_video_register as there is an intel opregion. 2) intel.ko gets loaded, calls acpi_video_register() which registers both the listener and the acpi backlight interface 3) asus-wmi.ko gets loaded, calls acpi_video_unregister() causing both the listener and the acpi backlight interface to unregister Scenario b: 1) acpi/video.ko gets loaded (*), does not do acpi_video_register as there is an intel opregion. 2) asus-wmi.ko gets loaded, calls acpi_video_dmi_promote_vendor(), calls acpi_video_unregister(), which is a nop since acpi_video_register has not yet been called 2) intel.ko gets loaded, calls acpi_video_register() which registers the listener, but does not register the acpi backlight interface due to the call to the preciding call to acpi_video_dmi_promote_vendor() *) acpi/video.ko always loads first as both other modules depend on it. So we end up with or without an acpi video bus event listener depending on module load ordering, not good. Switching to using acpi_video_unregister_backlight() means that independ of ordering we will always have an acpi video bus event listener fixing this. Note that this commit means that systems without an intel video opregion, and systems which were hitting scenario a wrt module load ordering, are now getting an acpi video bus event listener while before they were not! On some systems this may cause the brightness hotkeys to start generating keypresses while before they were not (good), while on other systems this may cause the brightness hotkeys to generate multiple keypress events for a single press (not so good). Since on most systems the acpi video bus is the canonical source for brightness events I believe that the latter case will needs to be handled on a case by case basis by filtering out the duplicate keypresses at the other source for them. Cc: acpi4asus-user@lists.sourceforge.net Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Corentin Chary <corentin.chary@gmail.com) Signed-off-by: Darren Hart <dvhart@linux.intel.com> |
|
|
Kast Bernd
|
53e755c21a |
asus-wmi: add fan control
This patch is partially based on Felipe Contrera's earlier patch, that was discussed here: https://lkml.org/lkml/2013/10/8/800 Some problems of that patch are solved, now: 1) The main obstacle for the earlier patch seemed to be the use of virt_to_phys, which is accepted, now 2) random memory corruption occurred on my notebook, thus DMA-able memory is allocated now, which solves this problem 3) hwmon interface is used instead of the thermal interface, as a hwmon device is already set up by this driver and seemed more appropriate than the thermal interface 4) Calling the ACPI-functions was modularized thus it's possible to call some multifunctions easily, now (by using asus_wmi_evaluate_method_agfn). Unfortunately the WMI doesn't support controlling both fans on a dual-fan notebook because of an restriction in the acpi-method "SFNS", that is callable through the wmi. If "SFNV" would be called directly even dual fan configurations could be controlled, but not by using wmi. Speed readings only work on auto-mode, thus "-1" will be reported in manual mode. Additionally the speed readings are reported as hundreds of RPM thus they are not too precise. This patch is tested only on one notebook (N551JK) but a similar module, that contained some code to try to control the second fan also, was reported to work on an UX32VD, at least for the first fan. As Felipe already mentioned the low-level functions are described here: http://forum.notebookreview.com/threads/fan-control-on-asus-prime-ux31-ux31a-ux32a-ux32vd.705656/ Signed-off-by: Kast Bernd <kastbernd@gmx.de> Acked-by: Corentin Chary <corentin.chary@gmail.com> Cc: Corentin Chary <corentin.chary@gmail.com> Cc: Darren Hart <dvhart@infradead.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Signed-off-by: Darren Hart <dvhart@linux.intel.com> |
|
|
Markus Elfring
|
0098181016 |
platform: x86: Deletion of checks before backlight_device_unregister()
The backlight_device_unregister() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> For msi-wmi.c: Acked-by: Anisse Astier <anisse@astier.eu> Signed-off-by: Darren Hart <dvhart@linux.intel.com> |
|
|
AceLan Kao
|
f515623cac |
asus-wmi: control wlan-led if wapf > 0
Wifi will be controlled by asus-wmi driver when wapf > 0 So, controls the wifi-led when wapf > 0 Signed-off-by: AceLan Kao <acelan.kao@canonical.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com> |
|
|
Hans de Goede
|
86ac2735ae |
asus-wmi: backlight_init: Stop treating -ENODEV as if its not an error
When bl_power support got added to asus-wmi, the error handling for it was written to ignore -ENODEV, to avoid not registering a backlight interface for models which have no bl_power control, but do have brightness control. At the same time the error handling for brightness_max was modified to do the same, this is wrong, when there is no brightness_max asus-wmi should not register a backlight interface. Note the caller of asus_wmi_backlight_init already special cases -ENODEV, and will not cause the wmi driver regristration to fail because of a -ENODEV return from asus_wmi_backlight_init. https://bugzilla.redhat.com/show_bug.cgi?id=1097436 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com> |
|
|
Hans de Goede
|
d8c66f6299 |
asus-wmi: Disable acpi-video backlight on desktop machines
Some Asus motherboards for desktop PC-s export an acpi-video interface advertising backlight support. Test the dmi chassis-type and tell acpi-video to not register a backlight interface on desktops. https://bugzilla.redhat.com/show_bug.cgi?id=1097436 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com> |
|
|
Rickard Strandqvist
|
8ad3be1eac |
platform: x86: asus-wmi.c: Cleaning up uninitialized variables
There is a risk that the variable will be used without being initialized. This was largely found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com> |
|
|
Yijing Wang
|
c893d133ea |
PCI: Make pci_bus_add_device() void
pci_bus_add_device() always returns 0, so there's no point in returning anything at all. Make it a void function and remove the tests of the return value from the callers. [bhelgaas: changelog, remove unused "err" from i82875p_setup_overfl_dev()] Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
|
|
Linus Torvalds
|
b7a8399edf |
Merge branch 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86
Pull x86 platform drivers update from Matthew Garrett: "Nothing amazingly special here. Some cleanups, a new driver to support a single button on some new HPs, a tiny amount of hardware enablement" * 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86: ipc: add intel-mid's pci id macros hp-wireless: new driver for hp wireless button for Windows 8 toshiba_acpi: Support RFKILL hotkey scancode hp_accel: Add a new PnP ID HPQ6007 for new HP laptops sony-laptop: remove unnecessary assigment of len fujitsu-laptop: fix error return code dell-laptop: Only install the i8042 filter when rfkill is active X86 platform: New BayTrail IOSF-SB MBI driver drivers: platform: Include appropriate header file in mxm-wmi.c drivers: platform: Mark functions as static in hp_accel.c dell-laptop: rkill whitelist Precision models ipc: simplify platform data approach asus-wmi: Convert to use devm_hwmon_device_register_with_groups compal-laptop: Use devm_hwmon_device_register_with_groups compal-laptop: Replace SENSOR_DEVICE_ATTR with DEVICE_ATTR eeepc-laptop: Convert to use devm_hwmon_device_register_with_groups compal-laptop: Use devm_kzalloc to allocate local data structure dell-laptop: fix to return error code in dell_send_intensity() |
|
|
Linus Torvalds
|
09da8dfa98 |
ACPI and power management updates for 3.14-rc1
- ACPI core changes to make it create a struct acpi_device object for every
device represented in the ACPI tables during all namespace scans regardless
of the current status of that device. In accordance with this, ACPI hotplug
operations will not delete those objects, unless the underlying ACPI tables
go away.
- On top of the above, new sysfs attribute for ACPI device objects allowing
user space to check device status by triggering the execution of _STA for
its ACPI object. From Srinivas Pandruvada.
- ACPI core hotplug changes reducing code duplication, integrating the
PCI root hotplug with the core and reworking container hotplug.
- ACPI core simplifications making it use ACPI_COMPANION() in the code
"glueing" ACPI device objects to "physical" devices.
- ACPICA update to upstream version 20131218. This adds support for the
DBG2 and PCCT tables to ACPICA, fixes some bugs and improves debug
facilities. From Bob Moore, Lv Zheng and Betty Dall.
- Init code change to carry out the early ACPI initialization earlier.
That should allow us to use ACPI during the timekeeping initialization
and possibly to simplify the EFI initialization too. From Chun-Yi Lee.
- Clenups of the inclusions of ACPI headers in many places all over from
Lv Zheng and Rashika Kheria (work in progress).
- New helper for ACPI _DSM execution and rework of the code in drivers
that uses _DSM to execute it via the new helper. From Jiang Liu.
- New Win8 OSI blacklist entries from Takashi Iwai.
- Assorted ACPI fixes and cleanups from Al Stone, Emil Goode, Hanjun Guo,
Lan Tianyu, Masanari Iida, Oliver Neukum, Prarit Bhargava, Rashika Kheria,
Tang Chen, Zhang Rui.
- intel_pstate driver updates, including proper Baytrail support, from
Dirk Brandewie and intel_pstate documentation from Ramkumar Ramachandra.
- Generic CPU boost ("turbo") support for cpufreq from Lukasz Majewski.
- powernow-k6 cpufreq driver fixes from Mikulas Patocka.
- cpufreq core fixes and cleanups from Viresh Kumar, Jane Li, Mark Brown.
- Assorted cpufreq drivers fixes and cleanups from Anson Huang, John Tobias,
Paul Bolle, Paul Walmsley, Sachin Kamat, Shawn Guo, Viresh Kumar.
- cpuidle cleanups from Bartlomiej Zolnierkiewicz.
- Support for hibernation APM events from Bin Shi.
- Hibernation fix to avoid bringing up nonboot CPUs with ACPI EC disabled
during thaw transitions from Bjørn Mork.
- PM core fixes and cleanups from Ben Dooks, Leonardo Potenza, Ulf Hansson.
- PNP subsystem fixes and cleanups from Dmitry Torokhov, Levente Kurusa,
Rashika Kheria.
- New tool for profiling system suspend from Todd E Brandt and a cpupower
tool cleanup from One Thousand Gnomes.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=dRf6
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management updates from Rafael Wysocki:
"As far as the number of commits goes, the top spot belongs to ACPI
this time with cpufreq in the second position and a handful of PM
core, PNP and cpuidle updates. They are fixes and cleanups mostly, as
usual, with a couple of new features in the mix.
The most visible change is probably that we will create struct
acpi_device objects (visible in sysfs) for all devices represented in
the ACPI tables regardless of their status and there will be a new
sysfs attribute under those objects allowing user space to check that
status via _STA.
Consequently, ACPI device eject or generally hot-removal will not
delete those objects, unless the table containing the corresponding
namespace nodes is unloaded, which is extremely rare. Also ACPI
container hotplug will be handled quite a bit differently and cpufreq
will support CPU boost ("turbo") generically and not only in the
acpi-cpufreq driver.
Specifics:
- ACPI core changes to make it create a struct acpi_device object for
every device represented in the ACPI tables during all namespace
scans regardless of the current status of that device. In
accordance with this, ACPI hotplug operations will not delete those
objects, unless the underlying ACPI tables go away.
- On top of the above, new sysfs attribute for ACPI device objects
allowing user space to check device status by triggering the
execution of _STA for its ACPI object. From Srinivas Pandruvada.
- ACPI core hotplug changes reducing code duplication, integrating
the PCI root hotplug with the core and reworking container hotplug.
- ACPI core simplifications making it use ACPI_COMPANION() in the
code "glueing" ACPI device objects to "physical" devices.
- ACPICA update to upstream version 20131218. This adds support for
the DBG2 and PCCT tables to ACPICA, fixes some bugs and improves
debug facilities. From Bob Moore, Lv Zheng and Betty Dall.
- Init code change to carry out the early ACPI initialization
earlier. That should allow us to use ACPI during the timekeeping
initialization and possibly to simplify the EFI initialization too.
From Chun-Yi Lee.
- Clenups of the inclusions of ACPI headers in many places all over
from Lv Zheng and Rashika Kheria (work in progress).
- New helper for ACPI _DSM execution and rework of the code in
drivers that uses _DSM to execute it via the new helper. From
Jiang Liu.
- New Win8 OSI blacklist entries from Takashi Iwai.
- Assorted ACPI fixes and cleanups from Al Stone, Emil Goode, Hanjun
Guo, Lan Tianyu, Masanari Iida, Oliver Neukum, Prarit Bhargava,
Rashika Kheria, Tang Chen, Zhang Rui.
- intel_pstate driver updates, including proper Baytrail support,
from Dirk Brandewie and intel_pstate documentation from Ramkumar
Ramachandra.
- Generic CPU boost ("turbo") support for cpufreq from Lukasz
Majewski.
- powernow-k6 cpufreq driver fixes from Mikulas Patocka.
- cpufreq core fixes and cleanups from Viresh Kumar, Jane Li, Mark
Brown.
- Assorted cpufreq drivers fixes and cleanups from Anson Huang, John
Tobias, Paul Bolle, Paul Walmsley, Sachin Kamat, Shawn Guo, Viresh
Kumar.
- cpuidle cleanups from Bartlomiej Zolnierkiewicz.
- Support for hibernation APM events from Bin Shi.
- Hibernation fix to avoid bringing up nonboot CPUs with ACPI EC
disabled during thaw transitions from Bjørn Mork.
- PM core fixes and cleanups from Ben Dooks, Leonardo Potenza, Ulf
Hansson.
- PNP subsystem fixes and cleanups from Dmitry Torokhov, Levente
Kurusa, Rashika Kheria.
- New tool for profiling system suspend from Todd E Brandt and a
cpupower tool cleanup from One Thousand Gnomes"
* tag 'pm+acpi-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (153 commits)
thermal: exynos: boost: Automatic enable/disable of BOOST feature (at Exynos4412)
cpufreq: exynos4x12: Change L0 driver data to CPUFREQ_BOOST_FREQ
Documentation: cpufreq / boost: Update BOOST documentation
cpufreq: exynos: Extend Exynos cpufreq driver to support boost
cpufreq / boost: Kconfig: Support for software-managed BOOST
acpi-cpufreq: Adjust the code to use the common boost attribute
cpufreq: Add boost frequency support in core
intel_pstate: Add trace point to report internal state.
cpufreq: introduce cpufreq_generic_get() routine
ARM: SA1100: Create dummy clk_get_rate() to avoid build failures
cpufreq: stats: create sysfs entries when cpufreq_stats is a module
cpufreq: stats: free table and remove sysfs entry in a single routine
cpufreq: stats: remove hotplug notifiers
cpufreq: stats: handle cpufreq_unregister_driver() and suspend/resume properly
cpufreq: speedstep: remove unused speedstep_get_state
platform: introduce OF style 'modalias' support for platform bus
PM / tools: new tool for suspend/resume performance optimization
ACPI: fix module autoloading for ACPI enumerated devices
ACPI: add module autoloading support for ACPI enumerated devices
ACPI: fix create_modalias() return value handling
...
|
|
|
Guenter Roeck
|
50a639fb15 |
asus-wmi: Convert to use devm_hwmon_device_register_with_groups
Simplify the code and avoid race conditions due to late sysfs attribute registration. Also replace SENSOR_DEVICE_ATTR with DEVICE_ATTR; the additional parameter is not used and thus unnecessary. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com> |
|
|
Rafael J. Wysocki
|
8b9ec1da6a |
platform / x86: Use global PCI rescan-remove locking
Multiple race conditions are possible between the rfkill hotplug in the asus-wmi and eeepc-laptop drivers and the generic PCI bus rescan and device removal that can be triggered via sysfs. To avoid those race conditions make asus-wmi and eeepc-laptop use global PCI rescan-remove locking around the rfkill hotplug. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
|
|
Lv Zheng
|
8b48463f89 |
ACPI: Clean up inclusions of ACPI header files
Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h> inclusions and remove some inclusions of those files that aren't necessary. First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h> should not be included directly from any files that are built for CONFIG_ACPI unset, because that generally leads to build warnings about undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set, <linux/acpi.h> includes those files and for CONFIG_ACPI unset it provides stub ACPI symbols to be used in that case. Second, there are ordering dependencies between those files that always have to be met. Namely, it is required that <acpi/acpi_bus.h> be included prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the latter depends on are always there. And <acpi/acpi.h> which provides basic ACPICA type declarations should always be included prior to any other ACPI headers in CONFIG_ACPI builds. That also is taken care of including <linux/acpi.h> as appropriate. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tony Luck <tony.luck@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff) Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
|
|
AceLan Kao
|
e8f56c80ae |
asus-wmi: control wlan-led only if wapf == 4
Controlling the wlan led seems to have some side effects to the machines with wapf value is not equal to 4. It will make the keyboard backlight out of order. So, the patch will enable the wlan led function only if the wapf == 4. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=46791 Reported-by: Mirto Silvio Busico <m.busico@ieee.org> Tested-by: Karol Herbst <karolherbst@me.com> Tested-by: drunkenbatman <drunkenbatman@gmail.com> Signed-off-by: AceLan Kao <acelan.kao@canonical.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com> |
|
|
vic
|
0ed60654a2 |
asus-wmi: append newline to messages
Append newline to messages. Signed-off-by: Viktar Vauchkevich <victorenator@gmail.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com> |
|
|
Shuah Khan
|
2adb95d83f |
asus-wmi: Fix unused function build warning
Fix the following build warning CC [M] drivers/platform/x86/asus-wmi.o drivers/platform/x86/asus-wmi.c:1356:13: warning: ‘do_nothing’ defined but not used [-Wunused-function] Signed-off-by: Shuah Khan <shuah.khan@hp.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com> |