Update all GID table entries of the netdevice whose MAC address changed.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Currently following issues exist:
1. Default GIDs of the lower (slave) netdevice if the bond netdevice is
added. Rather default GID should be of bond master netdevice.
2. Due to this, when failover event occurs FAILOVER event handler attempts
to delete the GID of the upper device and tries to add the default GID
of the lower device. This is incorrect behavior.
To have simple and correct code:
(a) Split default GIDs addition out of add_netdev_ips(). This allows
easier removal in future if RoCE default GIDs are removed.
(b) Add default GIDs of the bond master device by using right filter and
callback function.
(c) Remove unused function enum_netdev_default_gids().
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Now that we correctly delete the default GIDs of lower devices during
CHANGEUPPER event, add default GIDs of the bonding master device.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When NETDEV_CHANGEUPPER event occurs, lower device is not yet established
as slave of the master, and when upper device is bond device, default GID
entries not deleted.
Due to this, when bond device is fully configured, default GID entries of
bond device cannot be added as default GID entries are occupied by the
lower netdevice. This is incorrect.
Default GID entries should really be of bond netdevice because in all RoCE
GIDs (default or IP), MAC address of the bond device will be used. It is
confusing to have default GID of netdevice which is not really used for
any purpose.
Therefore, as first step, implement
(a) filter function which filters if a CHANGEUPPER event netdevice and
associated upper device is master device or not.
(b) callback function which deletes the default GIDs of lower (event
netdevice).
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Currently bond_delete_netdev_default_gids() is called by two callers.
(a) del_netdev_default_ips_join()
(b) del_netdev_default_ips()
Both above functions changes the argument order while calling
bond_delete_netdev_default_gids(). This required silly
del_netdev_default_ips() wrapper.
Additionally, del_netdev_default_ips() deletes default GIDs not IP based
GIDs. del_netdev_default_ips() having _ips suffix is confusing.
Therefore, get rid of confusing del_netdev_default_ips() and simplify
bond_delete_netdev_default_gids() to follow same argument order as its
caller.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add comment for handling CHANGEUPPER netevent handling.
To improve code readability,
(a) move cmd definitions to its respective if-else branches,
(b) avoid single line structure definitions.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch adds support for SRQ's created in user space and update
qedr_affiliated_event to deal with general SRQ events.
Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com>
Signed-off-by: Yuval Bason <yuval.bason@cavium.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Implement the SRQ specific verbs and update the poll_cq verb to deal with
SRQ completions.
Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com>
Signed-off-by: Yuval Bason <yuval.bason@cavium.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Today, we are using idr mechanism for QP's only.
This patch prepares the qedr_idr stuctures and the idr routines for
both QP's and SRQ's.
Signed-off-by: Yuval Bason <yuval.bason@cavium.com>
Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
mlx5_ib_create_qp_resp was never initialized and only the first 4 bytes
were written.
Fixes: 41d902cb7c ("RDMA/mlx5: Fix definition of mlx5_ib_create_qp_resp")
Cc: <stable@vger.kernel.org>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
- Revert two ACPICA commits that are not needed any more (Erik
Schmauss).
- Rework property graph support in the ACPI device properties
framework to make it behave more like the analogous DT code
and update the documentation of it (Sakari Ailus).
- Change the default ACPI device status after initialization
to ACPI_STA_DEFAULT instead of 0 (Hans de Goede).
- Add a special platform driver for enumerating multiple I2C devices
hooked up to the same object in the ACPI tables (Hans de Goede).
- Fix the ACPI battery driver to avoid reporting full capacity on
systems without support for that and clean it up (Hans de Goede,
Dmitry Rozhkov, Lucas Rangit Magasweran).
- Add two system wakeup quirks to the ACPI EC driver (Aaron Ma,
Mika Westerberg).
- Add the touchscreen on Dell Venue Pro 7139 to the list of "always
present" devices to make it work (Tristian Celestin).
- Revert a special tables handling quirk for Dell XPS 9570 and
Precision M5530 which is not needed any more (Kai Heng Feng).
- Add support for a new OEM _OSI string to allow system vendors to
work around issues with NVidia HDMI audio (Alex Hung).
- Prevent the ACPI button driver from reporting excessive system
wakeup events and clean it up (Ravi Chandra Sadineni, Randy Dunlap).
- Clean up two minor code style issues in the ACPI core and GHES
handling on ARM64 (Dongjiu Geng, John Garry, Tom Todd).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=5mW8
-----END PGP SIGNATURE-----
Merge tag 'acpi-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These revert two ACPICA commits that are not needed any more, rework
the property graphs support in ACPI to be more aligned with the
analogous DT code, add some new quirks and remove one that isn't
needed any more, add a special platform driver to enumerate multiple
I2C devices hooked up to the same device object in the ACPI tables and
update the battery and button drivers.
Specifics:
- Revert two ACPICA commits that are not needed any more (Erik
Schmauss).
- Rework property graph support in the ACPI device properties
framework to make it behave more like the analogous DT code and
update the documentation of it (Sakari Ailus).
- Change the default ACPI device status after initialization to
ACPI_STA_DEFAULT instead of 0 (Hans de Goede).
- Add a special platform driver for enumerating multiple I2C devices
hooked up to the same object in the ACPI tables (Hans de Goede).
- Fix the ACPI battery driver to avoid reporting full capacity on
systems without support for that and clean it up (Hans de Goede,
Dmitry Rozhkov, Lucas Rangit Magasweran).
- Add two system wakeup quirks to the ACPI EC driver (Aaron Ma, Mika
Westerberg).
- Add the touchscreen on Dell Venue Pro 7139 to the list of "always
present" devices to make it work (Tristian Celestin).
- Revert a special tables handling quirk for Dell XPS 9570 and
Precision M5530 which is not needed any more (Kai Heng Feng).
- Add support for a new OEM _OSI string to allow system vendors to
work around issues with NVidia HDMI audio (Alex Hung).
- Prevent the ACPI button driver from reporting excessive system
wakeup events and clean it up (Ravi Chandra Sadineni, Randy
Dunlap).
- Clean up two minor code style issues in the ACPI core and GHES
handling on ARM64 (Dongjiu Geng, John Garry, Tom Todd)"
* tag 'acpi-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (34 commits)
platform/x86: Add ACPI i2c-multi-instantiate pseudo driver
ACPI / x86: utils: Remove status workaround from acpi_device_always_present()
ACPI / scan: Create platform device for fwnodes with multiple i2c devices
ACPI / scan: Initialize status to ACPI_STA_DEFAULT
ACPI / EC: Add another entry for Thinkpad X1 Carbon 6th
ACPI: bus: Fix a pointer coding style issue
arm64 / ACPI: clean the additional checks before calling ghes_notify_sea()
ACPI / scan: Add static attribute to indirect_io_hosts[]
ACPI / battery: Do not export energy_full[_design] on devices without full_charge_capacity
ACPI / EC: Use ec_no_wakeup on ThinkPad X1 Yoga 3rd
ACPI / battery: get rid of negations in conditions
ACPI / battery: use specialized print macros
ACPI / battery: reorder headers alphabetically
ACPI / battery: drop inclusion of init.h
ACPI: battery: remove redundant old_present check on insertion
ACPI: property: graph: Update graph documentation to use generic references
ACPI: property: graph: Improve graph documentation for port/ep numbering
ACPI: property: graph: Fix graph documentation
ACPI: property: Update documentation for hierarchical data extension 1.1
ACPI: property: Document key numbering for hierarchical data extension refs
...
-----BEGIN PGP SIGNATURE-----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=b9ib
-----END PGP SIGNATURE-----
Merge tag 'for-4.19/block-20180812' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
"First pull request for this merge window, there will also be a
followup request with some stragglers.
This pull request contains:
- Fix for a thundering heard issue in the wbt block code (Anchal
Agarwal)
- A few NVMe pull requests:
* Improved tracepoints (Keith)
* Larger inline data support for RDMA (Steve Wise)
* RDMA setup/teardown fixes (Sagi)
* Effects log suppor for NVMe target (Chaitanya Kulkarni)
* Buffered IO suppor for NVMe target (Chaitanya Kulkarni)
* TP4004 (ANA) support (Christoph)
* Various NVMe fixes
- Block io-latency controller support. Much needed support for
properly containing block devices. (Josef)
- Series improving how we handle sense information on the stack
(Kees)
- Lightnvm fixes and updates/improvements (Mathias/Javier et al)
- Zoned device support for null_blk (Matias)
- AIX partition fixes (Mauricio Faria de Oliveira)
- DIF checksum code made generic (Max Gurtovoy)
- Add support for discard in iostats (Michael Callahan / Tejun)
- Set of updates for BFQ (Paolo)
- Removal of async write support for bsg (Christoph)
- Bio page dirtying and clone fixups (Christoph)
- Set of bcache fix/changes (via Coly)
- Series improving blk-mq queue setup/teardown speed (Ming)
- Series improving merging performance on blk-mq (Ming)
- Lots of other fixes and cleanups from a slew of folks"
* tag 'for-4.19/block-20180812' of git://git.kernel.dk/linux-block: (190 commits)
blkcg: Make blkg_root_lookup() work for queues in bypass mode
bcache: fix error setting writeback_rate through sysfs interface
null_blk: add lock drop/acquire annotation
Blk-throttle: reduce tail io latency when iops limit is enforced
block: paride: pd: mark expected switch fall-throughs
block: Ensure that a request queue is dissociated from the cgroup controller
block: Introduce blk_exit_queue()
blkcg: Introduce blkg_root_lookup()
block: Remove two superfluous #include directives
blk-mq: count the hctx as active before allocating tag
block: bvec_nr_vecs() returns value for wrong slab
bcache: trivial - remove tailing backslash in macro BTREE_FLAG
bcache: make the pr_err statement used for ENOENT only in sysfs_attatch section
bcache: set max writeback rate when I/O request is idle
bcache: add code comments for bset.c
bcache: fix mistaken comments in request.c
bcache: fix mistaken code comments in bcache.h
bcache: add a comment in super.c
bcache: avoid unncessary cache prefetch bch_btree_node_get()
bcache: display rate debug parameters to 0 when writeback is not running
...
Merge ACPICA changes and updates of the ACPI device properties
framework for 4.19.
These revert two ACPICA commits that are not needed any more and
modify the properties graph support in ACPI to be more in-line with
the analogous DT code.
* acpica:
ACPICA: Update version to 20180629
ACPICA: Revert "iASL compiler: allow compilation of externals with paths that refer to existing names"
ACPICA: Revert "iASL: change processing of external op namespace nodes for correctness"
* acpi-property:
ACPI: property: graph: Update graph documentation to use generic references
ACPI: property: graph: Improve graph documentation for port/ep numbering
ACPI: property: graph: Fix graph documentation
ACPI: property: Update documentation for hierarchical data extension 1.1
ACPI: property: Document key numbering for hierarchical data extension refs
ACPI: property: Use data node name and reg property for graphs
ACPI: property: Allow direct graph endpoint references
ACPI: property: Make the ACPI graph API private
ACPI: property: Document hierarchical data extension references
ACPI: property: Allow making references to non-device nodes
ACPI: Convert ACPI reference args to generic fwnode reference args
Even though this interface is marked CONFIG_BROKEN we still expect it to
compile, at least until we delete it completely.
Also mark INFINIBAND_USER_ACCESS_UCM with COMPILE_TEST so these situations
can be detected.
Fixes: e7ff98aefc ("RDMA/cma: Constify path record, ib_cm_event, listen_id pointers")
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Pull locking/atomics update from Thomas Gleixner:
"The locking, atomics and memory model brains delivered:
- A larger update to the atomics code which reworks the ordering
barriers, consolidates the atomic primitives, provides the new
atomic64_fetch_add_unless() primitive and cleans up the include
hell.
- Simplify cmpxchg() instrumentation and add instrumentation for
xchg() and cmpxchg_double().
- Updates to the memory model and documentation"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (48 commits)
locking/atomics: Rework ordering barriers
locking/atomics: Instrument cmpxchg_double*()
locking/atomics: Instrument xchg()
locking/atomics: Simplify cmpxchg() instrumentation
locking/atomics/x86: Reduce arch_cmpxchg64*() instrumentation
tools/memory-model: Rename litmus tests to comply to norm7
tools/memory-model/Documentation: Fix typo, smb->smp
sched/Documentation: Update wake_up() & co. memory-barrier guarantees
locking/spinlock, sched/core: Clarify requirements for smp_mb__after_spinlock()
sched/core: Use smp_mb() in wake_woken_function()
tools/memory-model: Add informal LKMM documentation to MAINTAINERS
locking/atomics/Documentation: Describe atomic_set() as a write operation
tools/memory-model: Make scripts executable
tools/memory-model: Remove ACCESS_ONCE() from model
tools/memory-model: Remove ACCESS_ONCE() from recipes
locking/memory-barriers.txt/kokr: Update Korean translation to fix broken DMA vs. MMIO ordering example
MAINTAINERS: Add Daniel Lustig as an LKMM reviewer
tools/memory-model: Fix ISA2+pooncelock+pooncelock+pombonce name
tools/memory-model: Add litmus test for full multicopy atomicity
locking/refcount: Always allow checked forms
...
Now that the ioctl path and uobjects are converted to use uverbs_api, it
is now safe to remove the disassociation protection from the common ioctl
code.
This completes the work to make destroy functions continue to work even
after device disassociation.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Convert the ioctl method syscall path to use the uverbs_api data
structures. The new uapi structure includes all the same information, just
in a different and more optimal way.
- Use attr_bkey instead of 2 level radix trees for everything related to
attributes. This includes the attribute storage, presence, and
detection of missing mandatory attributes.
- Avoid iterating over all attribute storage at finish, instead use
find_first_bit with the attr_bkey to locate only those attrs that need
cleanup.
- Organize things to always run, and always rely on, cleanup. This
avoids a bunch of tricky error unwind cases.
- Locate the method using the radix tree, and locate the attributes
using a very efficient incremental radix tree lookup
- Use the precomputed destroy_bkey to handle uobject destruction
- Use the precomputed allocation sizes and precomputed 'need_stack'
to avoid maths in the fast path. This is optimal if userspace
does not pass (many) unsupported attributes.
Overall this results in much better codegen for the attribute accessors,
everything is now stored in bitmaps or linear arrays indexed by attr_bkey.
The compiler can compute attr_bkey values at compile time for all method
attributes, meaning things like uverbs_attr_is_valid() now compile into
single instruction bit tests.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Several handlers need temporary allocations for the life of the method,
switch them to use the uverbs_alloc allocator.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
This is similar in spirit to devm, it keeps track of any allocations
linked to this method call and ensures they are all freed when the method
exits. Further, if there is space in the internal/onstack buffer then the
allocator will hand out that memory and avoid an expensive call to
kalloc/kfree in the syscall path.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Memory in the bundle is valuable, do not waste it holding an 8 byte
pointer for the rare case of writing to a PTR_OUT. We can compute the
pointer by storing a small 1 byte array offset and the base address of the
uattr memory in the bundle private memory.
This also means we can access the kernel's copy of the ib_uverbs_attr, so
drop the copy of flags as well.
Since the uattr base should be private bundle information this also
de-inlines the already too big uverbs_copy_to inline and moves
create_udata into uverbs_ioctl.c so they can see the private struct
definition.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
This already existed as the anonymous 'ctx' structure, but this was not
really a useful form. Hoist this struct into bundle_priv and rework the
internal things to use it instead.
Move a bunch of the processing internal state into the priv and reduce the
excessive use of function arguments.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Currently the struct uverbs_obj_type stored in the ib_uobject is part of
the .rodata segment of the module that defines the object. This is a
problem if drivers define new uapi objects as we will be left with a
dangling pointer after device disassociation.
Switch the uverbs_obj_type for struct uverbs_api_object, which is
allocated memory that is part of the uverbs_api and is guaranteed to
always exist. Further this moves the 'type_class' into this memory which
means access to the IDR/FD function pointers is also guaranteed. Drivers
cannot define new types.
This makes it safe to continue to use all uobjects, including driver
defined ones, after disassociation.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This radix tree datastructure is intended to replace the 'hash' structure
used today for parsing ioctl methods during system calls. This first
commit introduces the structure and builds it from the existing .rodata
descriptions.
The so-called hash arrangement is actually a 5 level open coded radix tree.
This new version uses a 3 level radix tree built using the radix tree
library.
Overall this is much less code and much easier to build as the radix tree
API allows for dynamic modification during the building. There is a small
memory penalty to pay for this, but since the radix tree is allocated on
a per device basis, a few kb of RAM seems immaterial considering the
gained simplicity.
The radix tree is similar to the existing tree, but also has a 'attr_bkey'
concept, which is a small value'd index for each method attribute. This is
used to simplify and improve performance of everything in the next
patches.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
There is no reason for drivers to do this, the core code should take of
everything. The drivers will provide their information from rodata to
describe their modifications to the core's base uapi specification.
The core uses this to build up the runtime uapi for each device.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
This is missing a zeroing of the high bits of flags, and is also not
correct for big endian machines. Properly zero extend the 32 bit flags
into the 64 bit stack variable.
Reported-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Fixes: bccd06223f ("IB/uverbs: Add UVERBS_ATTR_FLAGS_IN to the specs language")
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Every function that returns COMPST_ERROR must set wqe->status to another
value than IB_WC_SUCCESS before returning COMPST_ERROR. Fix the only code
path for which this is not yet the case.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This will allow FW to not send more data to TP (which would then need to
be buffered). Pass the negotiated TCP window scale to FW in the FLOWC WR.
Also refactor send_flowc() a bit to clean it up.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
sgid_attr is uninitialized on the stack, initialize it to NULL.
Fixes: 398391071f ("IB/cm: Replace members of sa_path_rec with 'struct sgid_attr *'")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Yossi Itigin <yosefe@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAltU8z0eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG5X8H/2fJr7m3k242+t76
sitwvx1eoPqTgryW59dRKm9IuXAGA+AjauvHzaz1QxomeQa50JghGWefD0eiJfkA
1AphQ/24EOiAbbVk084dAI/C2p122dE4D5Fy7CrfLnuouyrbFaZI5STbnrRct7sR
9deeYW0GDHO1Uenp4WDCj0baaqJqaevZ+7GG09DnWpya2nQtSkGBjqn6GpYmrfOU
mqFuxAX8mEOW6cwK16y/vYtnVjuuMAiZ63/OJ8AQ6d6ArGLwAsdn7f8Fn4I4tEr2
L0d3CRLUyegms4++Dmlu05k64buQu46WlPhjCZc5/Ts4kjrNxBuHejj2/jeSnUSt
vJJlibI=
=42a5
-----END PGP SIGNATURE-----
Merge tag 'v4.18-rc6' into for-4.19/block2
Pull in 4.18-rc6 to get the NVMe core AEN change to avoid a
merge conflict down the line.
Signed-of-by: Jens Axboe <axboe@kernel.dk>
- Refuse invalid port numbers in the modify_qp system call
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=8q1F
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fix from Jason Gunthorpe:
"One bug for missing user input validation: refuse invalid port numbers
in the modify_qp system call"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/uverbs: Expand primary and alt AV port checks
Move all the checking for pkey and other validity to the __ipoib_vlan_add
function. This removes the last difference from the control flow
of the __ipoib_vlan_add to make the overall design simpler to
understand.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
This fixes a bug in the netlink path where the vlan_rwsem was not
held around __ipoib_vlan_add causing the child_intfs to be manipulated
unsafely.
In the process this greatly simplifies the vlan_rwsem write side locking
to only cover a single non-sleeping statement.
This also further increases the safety of the removal ordering by holding
the netdev of the parent while the child is active to ensure most bugs
become either an oops on a NULL priv or a deadlock on the netdev refcount.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Switching to priv_destructor and needs_free_netdev created a subtle
ordering problem in ipoib_remove_one.
Now that unregister_netdev frees the netdev and priv we must ensure that
the children are unregistered before trying to unregister the parent,
or child unregister will use after free.
The solution is to unregister the children, then parent, in the same batch
all while holding the rtnl_lock. This closes all the races where a new
child could have been added and ensures proper ordering.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
This mutex was introduced to deal with the deadlock formed by calling
unregister_netdev from within the sysfs callback of a netdev.
Now that we have priv_destructor and needs_free_netdev we can switch
to the more targeted solution of running the unregister from a
work queue. This avoids the deadlock and gets rid of the mutex.
The next patch in the series needs this mutex eliminated to create
atomicity of unregisteration.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Now that the unregister_netdev flow for IPoIB no longer relies on external
code we can now introduce the use of priv_destructor and
needs_free_netdev.
The rdma_netdev flow is switched to use the netdev common priv_destructor
instead of the special free_rdma_netdev and the IPOIB ULP adjusted:
- priv_destructor needs to switch to point to the ULP's destructor
which will then call the rdma_ndev's in the right order
- We need to be careful around the error unwind of register_netdev
as it sometimes calls priv_destructor on failure
- ULPs need to use ndo_init/uninit to ensure proper ordering
of failures around register_netdev
Switching to priv_destructor is a necessary pre-requisite to using
the rtnl new_link mechanism.
The VNIC user for rdma_netdev should also be revised, but that is left for
another patch.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Denis Drozdov <denisd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Now that we have a proper ndo_uninit, move code that naturally pairs
with the ndo_uninit into ndo_init. This allows the netdev core to natually
handle ordering.
This fixes the situation where register_netdev can fail before calling
ndo_init, in which case it wouldn't call ndo_uninit either.
Also move a bunch of duplicated init code that is shared between child
and parent for clarity. Now the child and parent register functions look
very similar.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Currently uninit is sometimes done twice in error flows, and is sprinkled
a bit all over the place.
Improve the clarity of the design by moving all uninit only into
ndo_uinit.
Some duplication is removed:
- Sometimes IPOIB_STOP_NEIGH_GC was done before unregister, but
this duplicates the process in ipoib_neigh_hash_init
- Flushing priv->wq was sometimes done before unregister,
but that duplicates what has been done in ndo_uninit
Uniniting the IB event queue must remain before unregister_netdev as it
requires the RTNL lock to be dropped, this is moved to a helper to make
that flow really clear and remove some duplication in error flows.
If register_netdev fails (and ndo_init is NULL) then it almost always
calls ndo_uninit, which lets us remove all the extra code from the error
unwinds. The next patch in the series will close the 'almost always' hole
by pairing a proper ndo_init with ndo_uninit.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
The neigh_reap_task is self restarting, but so long as we call
cancel_delayed_work_sync() it will be guaranteed to not be running and
never start again. Thus we don't need to have the racy
IPOIB_STOP_NEIGH_GC bit, or the confusing mismatch of places sometimes
calling flush_workqueue after the cancel.
This fixes a situation where the GC work could have been left running
in some rare situations.
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This essentially duplicates the netdev's reg_state, so just use that
directly. The reg_state is updated under the rntl_lock, and all places
using GOING_DOWN already acquire the rtnl_lock so checking is safe.
Since the only place we use GOING_DOWN is for the parent device this
does not fix any bugs, but it is a step to tidy up the unregister flow
so that after later patches the flow is uniform and sane.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
To optimize NVME-oF READ IOPs, use a specialized WQE that combines
the RDMA WRITE and SEND_INV WR chain submitted by the NVME-oF target
driver.
This reduces uP overhead per NVME-oF IO, and results in over 10%
improvement in NVME-oF 4K READ IOPs.
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Adds iw_cxgb4 functionality to support RDMA_WRITE_WITH_IMMEDATE opcode.
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In c4iw_create_qp() there are several struct members which potentially
aren't inintialized like uresp.rq_key. I've fixed this code before in
in commit ae1fe07f3f ("RDMA/cxgb4: Fix stack info leak in
c4iw_create_qp()") so this time I'm just going to take a big hammer
approach and memset the whole struct to zero. Hopefully, it will stay
fixed this time.
In c4iw_create_srq() we don't clear uresp.reserved.
Fixes: 6a0b6174d3 ("rdma/cxgb4: Add support for kernel mode SRQ's")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Raju Rangoju <rajur@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
According to IB protocol, there are some cases that work requests must
return the flush error completion status through the completion queue. Due
to hardware limitation, the driver needs to assist the flush process.
This patch adds the support of flush cqe for hip08 in the cases that
needed, such as poll cqe, post send, post recv and aeqe handle.
The patch also considered the compatibility between kernel and user space.
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This converts the drivers that called transport_deregister_session_configfs
and then immediately called transport_deregister_session to use
target_remove_session.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Chris Boot <bootc@bootc.net>
Cc: Bryant G. Ly <bryantly@linux.vnet.ibm.com>
Cc: Michael Cyr <mikecyr@linux.vnet.ibm.com>
Cc: <qla2xxx-upstream@qlogic.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Rename target_alloc_session to target_setup_session to avoid confusion with
the other transport session allocation function that only allocates the
session and because the target_alloc_session does so much more. It
allocates the session, sets up the nacl and registers the session.
The next patch will then add a remove function to match the setup in this
one, so it should make sense for all drivers, except iscsi, to just call
those 2 functions to setup and remove a session.
iscsi will continue to be the odd driver.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Chris Boot <bootc@bootc.net>
Cc: Bryant G. Ly <bryantly@linux.vnet.ibm.com>
Cc: Michael Cyr <mikecyr@linux.vnet.ibm.com>
Cc: <qla2xxx-upstream@qlogic.com>
Cc: Johannes Thumshirn <jth@kernel.org>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The change of ipoib_ah data structure with adding "valid" flag and
checks of ah->valid in ipoib_start_xmit affected multicast packet flow.
Since the multicast flow doesn't invoke path_rec_start, "ah->valid" flag
remains unset, so that ipoib_start_xmit end up with neigh_refresh_path
instead of sending the packet using neigh.
"ah->valid" has to be set in multicast send flow. As a result IPoIB
starts sending packets via neigh immediately and eliminates 60sec delay
of neigh keep alive interval.
The typical example of this issue are two sequential arpings:
arping 11.134.208.9 -> got response (mcast_send)
arping 11.134.208.9 -> no response (ah->valid = 0)
Fixes: fa9391dbad ("RDMA/ipoib: Update paths on CLIENT_REREG/SM_CHANGE events")
Signed-off-by: Denis Drozdov <denisd@mellanox.com>
Reviewed-by: Erez Shitrit <erezsh@mellanox.com>
Reviewed-by: Feras Daoud <ferasda@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The disassociate function was broken by design because it failed all
commands. This prevents userspace from calling destroy on a uobject after
it has detected a device fatal error and thus reclaiming the resources in
userspace is prevented.
This fix is now straightforward, when anything destroys a uobject that is
not the user the object remains on the IDR with a NULL context and object
pointer. All lookup locking modes other than DESTROY will fail. When the
user ultimately calls the destroy function it is simply dropped from the
IDR while any related information is returned.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Now that all the callbacks are safe to run concurrently with
disassociation this test can be eliminated. The ufile core infrastructure
becomes entirely self contained and is not sensitive to disassociation.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This does the same as the patch before, except for ioctl. The rules are
the same, but for the ioctl methods the core code handles setting up the
uobject.
- Retrieve the ib_dev from the uobject->context->device. This is
safe under ioctl as the core has already done rdma_alloc_begin_uobject
and so CREATE calls are entirely protected by the rwsem.
- Retrieve the ib_dev from uobject->object
- Call ib_uverbs_get_ucontext()
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This is a step to get rid of the global check for disassociation. In this
model, the ib_dev is not proven to be valid by the core code and cannot be
provided to the method. Instead, every method decides if it is able to
run after disassociation and obtains the ib_dev using one of three
different approaches:
- Call srcu_dereference on the udevice's ib_dev. As before, this means
the method cannot be called after disassociation begins.
(eg alloc ucontext)
- Retrieve the ib_dev from the ucontext, via ib_uverbs_get_ucontext()
- Retrieve the ib_dev from the uobject->object after checking
under SRCU if disassociation has started (eg uobj_get)
Largely, the code is all ready for this, the main work is to provide a
ib_dev after calling uobj_alloc(). The few other places simply use
ib_uverbs_get_ucontext() to get the ib_dev.
This flexibility will let the next patches allow destroy to operate
after disassociation.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Commands that are reading/writing to objects can test for an ongoing
disassociation during their initial call to rdma_lookup_get_uobject. This
directly prevents all of these commands from conflicting with an ongoing
disassociation.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
After all the recent structural changes this is now straightforward, hold
the hw_destroy_rwsem across the entire uobject creation. We already take
this semaphore on the success path, so holding it a bit longer is not
going to change the performance.
After this change none of the create callbacks require the
disassociate_srcu lock to be correct.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
After all the recent structural changes this is now straightfoward, hoist
the hw_destroy_rwsem up out of rdma_destroy_explicit and wrap it around
the uobject write lock as well as the destroy.
This is necessary as obtaining a write lock concurrently with
uverbs_destroy_ufile_hw() will cause malfunction.
After this change none of the destroy callbacks require the
disassociate_srcu lock to be correct.
This requires introducing a new lookup mode, UVERBS_LOOKUP_DESTROY as the
IOCTL interface needs to hold an unlocked kref until all command
verification is completed.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There are several flows that can destroy a uobject and each one is
minimized and sprinkled throughout the code base, making it difficult to
understand and very hard to modify the destroy path.
Consolidate all of these into uverbs_destroy_uobject() and call it in all
cases where a uobject has to be destroyed.
This makes one change to the lifecycle, during any abort (eg when
alloc_commit is not called) we always call out to alloc_abort, even if
remove_commit needs to be called to delete a HW object.
This also renames RDMA_REMOVE_DURING_CLEANUP to RDMA_REMOVE_ABORT to
clarify its actual usage and revises some of the comments to reflect what
the life cycle is for the type implementation.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The ridiculous dance with uobj_remove_commit() is not needed, the write
path can follow the same flow as ioctl - lock and destroy the HW object
then use the data left over in the uobject to form the response to
userspace.
Two helpers are introduced to make this flow straightforward for the
caller.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The core code will destroy the HW object on behalf of the method, if the
method provides an implementation it must simply copy data from the stub
uobj into the response. Destroy methods cannot touch the HW object.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The proper return code is "-EOPNOTSUPP" when the modify_cq() callback is
not supported, all drivers should generate this and all users should check
for it when detecting not supported functionality.
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com> (for mlx5)
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch avoids that sparse reports the following warning:
drivers/infiniband/hw/cxgb4/qp.c:2269:34: warning: Using plain integer as NULL pointer
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Acked-by: Raju Rangoju <rajur@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch avoids that sparse complains about casts to restricted __be32.
Fixes: a3cdaa69e4 ("cxgb4: Adds CPL support for Shared Receive Queues")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch avoids that the following warning is reported when building with
W=1:
drivers/infiniband/hw/cxgb4/cm.c:1860:5: warning: variable 'status' set but not used [-Wunused-but-set-variable]
u8 status;
^~~~~~
Fixes: 6a0b6174d3 ("rdma/cxgb4: Add support for kernel mode SRQ's")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In rdma cm module, functions which are common between IB and iWarp
are named with cma_.
iWarp specific functions are prefixed with cma_iw.
IB specific functions are perfixed with cma_ib.
However some functions in request processing path didn't follow
cma_ib notion. Prefix them with _ib for better code clarity.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
cma_add_one() initializes the default GID regardless of device type.
listen_id is bound to a device and an IP address, its GID type is
initialized by cma_acquire_dev().
Therefore a valid default GID type is always available, it is not needed
to check port type during cma_acquire_dev().
Initialize gid type of a cm id when the cm_id is created instead of
doing conditional checks during cma_acquire_dev() and trying to
initialize to 0 during _cma_attach_to_dev().
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In various functions rdma_cm_event is zero initialized on stack using
memset() while holding lock which is not necessary.
Therefore, don't hold the lock while initializing on stack.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Return bool for following internal and inline functions as their
underlying APIs return bool too.
1. cma_zero_addr()
2. cma_loopback_addr()
3. cma_any_addr()
4. ib_addr_any()
5. ib_addr_loopback()
While we are touching cma_loopback_addr(), remove extra white spaces
in it.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Arrange fields of cma_req_info structure for efficiency on
stack and get rid of one bit boolean field.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Constify several pointers such as path_rec, ib_cm_event and listen_id
pointers in several functions.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Following APIs are not supposed to modify addr or dest_addr contents.
Therefore make those function argument const for better code
readability.
1. rdma_resolve_ip()
2. rdma_addr_size()
3. rdma_resolve_addr()
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Currently dst address is first set and later on cleared on either of the
3 error conditions are met.
However none of the APIs or checks are supposed to refer to the
destination address of the cm_id.
Therefore, set the destination address after necessary checks pass which
simplifies the error flow.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Currently rdma_cm_id's resource tracking fields such as owner task and
kern_name and other non resource tracking fields are initialized in
in single function __rdma_create_id().
Therefore, initialize rdma_cm_id's resource type also in same init
function.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This was missed in a few places, and was just using 0.
Also correct the spelling of HNS_ROCE_FLOW_LABEL_MASK
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch mainly uses CMD_CSQ_DESC_NUM instead of magic number in order
to improve readability.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Set for ret was missing in the error path here, resulting in incorrect
error code for modify_qp.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch mainly fills the correct value into the vlan id field of qp
context as well as update the vlan field name according to the latest
hardware user manual.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Only when the IB_QP_AV flag of attr_mask is set is it valid to assign the
related fields of the av into the qp context.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The rdma core is taking care of return the right error code when the
rdma device callbacks aren't supported.
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Make sure the providers implement the verbs callbacks before calling
them, otherwise return -EOPNOTSUPP.
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
{create,destroy}_ah aren't mandatory verbs, because not all providers
are implementing them.
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Make sure to check for "-EOPNOTSUPP" instead of "-ENOSYS" which is the
return code from ib_create_srq() in case that it not supported.
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The proper return code is "-EOPNOTSUPP" when the create_srq() callback
is not supported.
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In the current implementation, the driver tries to allocate contiguous
memory, and if it fails, it falls back to 4K fragmented allocation.
Once the memory is fragmented, the first allocation might take a lot
of time, and even fail, which can cause connection failures.
This patch changes the logic to always allocate with 4K granularity,
since it's more robust and more likely to succeed.
This patch was tested with Lustre and no performance degradation
was observed.
Note: This commit eliminates the "shrinking WQE" feature. This feature
depended on using vmap to create a virtually contiguous send WQ.
vmap use was abandoned due to problems with several processors (see the
commit cited below). As a result, shrinking WQE was available only with
physically contiguous send WQs. Allocating such send WQs caused the
problems described above.
Therefore, as a side effect of eliminating the use of large physically
contiguous send WQs, the shrinking WQE feature became unavailable.
Warning example:
worker/20:1: page allocation failure: order:8, mode:0x80d0
CPU: 20 PID: 513 Comm: kworker/20:1 Tainted: G OE ------------
Workqueue: ib_cm cm_work_handler [ib_cm]
Call Trace:
[<ffffffff81686d81>] dump_stack+0x19/0x1b
[<ffffffff81186160>] warn_alloc_failed+0x110/0x180
[<ffffffff8118a954>] __alloc_pages_nodemask+0x9b4/0xba0
[<ffffffff811ce868>] alloc_pages_current+0x98/0x110
[<ffffffff81184fae>] __get_free_pages+0xe/0x50
[<ffffffff8133f6fe>] swiotlb_alloc_coherent+0x5e/0x150
[<ffffffff81062551>] x86_swiotlb_alloc_coherent+0x41/0x50
[<ffffffffa056b4c4>] mlx4_buf_direct_alloc.isra.7+0xc4/0x180 [mlx4_core]
[<ffffffffa056b73b>] mlx4_buf_alloc+0x1bb/0x260 [mlx4_core]
[<ffffffffa0b15496>] create_qp_common+0x536/0x1000 [mlx4_ib]
[<ffffffff811c6ef7>] ? dma_pool_free+0xa7/0xd0
[<ffffffffa0b163c1>] mlx4_ib_create_qp+0x3b1/0xdc0 [mlx4_ib]
[<ffffffffa0b01bc2>] ? mlx4_ib_create_cq+0x2d2/0x430 [mlx4_ib]
[<ffffffffa0b21f20>] mlx4_ib_create_qp_wrp+0x10/0x20 [mlx4_ib]
[<ffffffffa08f152a>] ib_create_qp+0x7a/0x2f0 [ib_core]
[<ffffffffa06205d4>] rdma_create_qp+0x34/0xb0 [rdma_cm]
[<ffffffffa08275c9>] kiblnd_create_conn+0xbf9/0x1950 [ko2iblnd]
[<ffffffffa074077a>] ? cfs_percpt_unlock+0x1a/0xb0 [libcfs]
[<ffffffffa0835519>] kiblnd_passive_connect+0xa99/0x18c0 [ko2iblnd]
Fixes: 73898db043 ("net/mlx4: Avoid wrong virtual mappings")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This clearly indicates that the input is a bitwise combination of values
in an enum, and identifies which enum contains the definition of the bits.
Special accessors are provided that handle the mandatory validation of the
allowed bits and enforce the correct type for bitwise flags.
If we had introduced this at the start then the kabi would have uniformly
used u64 data to pass flags, however today there is a mixture of u64 and
u32 flags. All places are converted to accept both sizes and the accessor
fixes it. This allows all existing flags to grow to u64 in future without
any hassle.
Finally all flags are, by definition, optional. If flags are not passed
the accessor does not fail, but provides a value of zero.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Since neither ib_post_send() nor ib_post_recv() modify the data structure
their second argument points at, declare that argument const. This change
makes it necessary to declare the 'bad_wr' argument const too and also to
modify all ULPs that call ib_post_send(), ib_post_recv() or
ib_post_srq_recv(). This patch does not change any functionality but makes
it possible for the compiler to verify whether the
ib_post_(send|recv|srq_recv) really do not modify the posted work request.
To make this possible, only one cast had to be introduce that casts away
constness, namely in rpcrdma_post_recvs(). The only way I can think of to
avoid that cast is to introduce an additional loop in that function or to
change the data type of bad_wr from struct ib_recv_wr ** into int
(an index that refers to an element in the work request list). However,
both approaches would require even more extensive changes than this
patch.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Since the next patch will constify the wr pointer, do not modify the data
that pointer points at.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Cc: Saeed Mahameed <saeedm@mellanox.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When posting a send work request, the work request that is posted is not
modified by any of the RDMA drivers. Make this explicit by constifying
most ib_send_wr pointers in RDMA transport drivers.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Since the next patch will change the return type of these functions into a
const pointer and since the iSER driver modifies the work request these
functions return a pointer two, inline two work request conversion
function calls. This patch does not change any functionality.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Currently this function is implemented in the scsi layer, but it's
actual place should be the block layer since T10-PI is a general
data integrity feature that is used in the nvme protocol as well.
Suggested-by: Christoph Hellwig <hch@lst.de>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The driver implements the modify_cq callback, but did not set the bit to
expose it to userspace.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Because the data structure of hip08 is little endian, it needs to fix the
immediate field of wqe and cqe into __le32.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In order to avoid using usleep function in lock function, we use delay
function instead of it. Besides, it also use brackets for standardized
the computed order.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When hop_num is more than three, it need to return -EINVAL. This patch
fixes it.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When create loop qp fail, it will return the correct result when
modify_qp() fails.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When init cmq fail in initial flow of RoCE, it should return the errno of
cmq_init function, not of the rest call.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When a CX5 device is configured in dual-port RoCE mode, after creating
many VFs against port 1, creating the same number of VFs against port 2
will flood kernel/syslog with something like
"mlx5_*:mlx5_ib_bind_slave_port:4266:(pid 5269): port 2 already
affiliated."
So basically, when traversing mlx5_ib_dev_list, mlx5_ib_add_slave_port()
repeatedly attempts to bind the new mpi structure to every device on the
list until it finds an unbound device.
Change the log level from warn to dbg to avoid log flooding as the warning
should be harmless.
Signed-off-by: Qing Huang <qing.huang@oracle.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch avoids that the following compiler warning is reported when
building with gcc 8 and W=1:
drivers/infiniband/hw/usnic/usnic_fwd.c:95:2: warning: 'strncpy' output may be truncated copying 16 bytes from a string of length 20 [-Wstringop-truncation]
strncpy(ufdev->name, netdev_name(ufdev->netdev),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sizeof(ufdev->name) - 1);
~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Currently if the cm_id is not bound to any netdevice, than for such cm_id,
net namespace is ignored; which is incorrect.
Regardless of cm_id bound to a netdevice or not, net namespace must
match. When a cm_id is bound to a netdevice, in such case net namespace
and netdevice both must match.
Fixes: 4c21b5bcef ("IB/cma: Add net_dev and private data checks to RDMA CM")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Parav Pandit