mirror of https://gitee.com/openkylin/linux.git
190 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Rafael J. Wysocki
|
4dc3082dc1 |
ACPI / hotplug / PCI: Drop acpiphp_bus_trim()
If trim_stale_devices() calls acpi_bus_trim() directly, we can save a potentially costly acpi_bus_get_device() invocation. After making that change acpiphp_bus_trim() would only be called from one place, so move the code from it to that place and drop it. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> |
|
|
Rafael J. Wysocki
|
146fc68a4b |
ACPI / hotplug / PCI: Simplify register_slot()
The err label in register_slot() is only jumped to from one place, so move the code under the label to that place and drop the label. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> |
|
|
Rafael J. Wysocki
|
454481adf5 |
ACPI / hotplug / PCI: Proper kerneldoc comments for enumeration/removal
Add proper kerneldoc comments describing acpiphp_enumerate_slots() and acpiphp_remove_slots(). Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> |
|
|
Rafael J. Wysocki
|
1c0c5443de |
ACPI / hotplug / PCI: Simplify disable_slot()
After recent PCI core changes related to the rescan/remove locking,
the ACPIPHP's disable_slot() function is only called under the
general PCI rescan/remove lock, so it doesn't have to use
dev_in_slot() any more to avoid race conditions. Make it simply
walk the devices on the bus and drop the ones in the slot being
disabled and drop dev_in_slot() which has no more users.
Moreover, to avoid problems described in the changelog of commit
|
|
|
Rafael J. Wysocki
|
af9d8adc6b |
ACPI / hotplug / PCI: Fix bridge removal race vs dock events
If a PCI bridge with an ACPIPHP context attached is removed via
sysfs, the code path executed as a result is the following:
pci_stop_and_remove_bus_device_locked
pci_remove_bus
pcibios_remove_bus
acpi_pci_remove_bus
acpiphp_remove_slots
cleanup_bridge
unregister_hotplug_dock_device (drops dock references to the bridge)
put_bridge
free_bridge
acpiphp_put_context (for each child, under context lock)
kfree (context)
Now, if a dock event affecting one of the bridge's child devices
occurs (roughly at the same time), it will lead to the following code
path:
acpi_dock_deferred_cb
dock_notify
handle_eject_request
hot_remove_dock_devices
dock_hotplug_event
hotplug_event (dereferences context)
That may lead to a kernel crash in hotplug_event() if it is executed
after the last kfree() in the bridge removal code path.
To prevent that from happening, add a wrapper around hotplug_event()
called dock_event() and point the .handler pointer in acpiphp_dock_ops
to it. Make that wrapper retrieve the device's ACPIPHP context using
acpiphp_get_context() (instead of taking it from the data argument)
under acpiphp_context_lock and check if the parent bridge's
is_going_away flag is set. If that flag is set, it will return
immediately and if it is not set it will grab a reference to the
device's parent bridge before executing hotplug_event().
Then, in the above scenario, the reference to the parent bridge
held by dock_event() will prevent free_bridge() from being executed
for it until hotplug_event() returns.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
|
Rafael J. Wysocki
|
1b360f44d0 |
ACPI / hotplug / PCI: Fix bridge removal race in handle_hotplug_event()
If a PCI bridge with an ACPIPHP context attached is removed via
sysfs, the code path executed as a result is the following:
pci_stop_and_remove_bus_device_locked
pci_remove_bus
pcibios_remove_bus
acpi_pci_remove_bus
acpiphp_remove_slots
cleanup_bridge
put_bridge
free_bridge
acpiphp_put_context (for each child, under context lock)
kfree (child context)
Now, if a hotplug notify is dispatched for one of the bridge's
children and the timing is such that handle_hotplug_event() for
that notify is executed while free_bridge() above is running,
the get_bridge(context->func.parent) in handle_hotplug_event()
will not really help, because it is too late to prevent the bridge
from going away and the child's context may be freed before
hotplug_event_work() scheduled from handle_hotplug_event()
dereferences the pointer to it passed via the data argument.
That will cause a kernel crash to happpen in hotplug_event_work().
To prevent that from happening, make handle_hotplug_event()
check the is_going_away flag of the function's parent bridge
(under acpiphp_context_lock) and bail out if it's set. Also,
make cleanup_bridge() set the bridge's is_going_away flag under
acpiphp_context_lock so that it cannot be changed between the
check and the subsequent get_bridge(context->func.parent) in
handle_hotplug_event().
Then, in the above scenario, handle_hotplug_event() will notice
that context->func.parent->is_going_away is already set and it
will exit immediately preventing the crash from happening.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
|
Rafael J. Wysocki
|
d42f5da234 |
ACPI / hotplug / PCI: Scan root bus under the PCI rescan-remove lock
Since acpiphp_check_bridge() called by acpiphp_check_host_bridge() does things that require PCI rescan-remove locking around it, make acpiphp_check_host_bridge() use that locking. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> |
|
|
Rafael J. Wysocki
|
f41b326131 |
ACPI / hotplug / PCI: Move PCI rescan-remove locking to hotplug_event()
Commit |
|
|
Rafael J. Wysocki
|
2d7c1b77dd |
ACPI / hotplug / PCI: Remove entries from bus->devices in reverse order
According to the changelog of commit
|
|
|
Linus Torvalds
|
09da8dfa98 |
ACPI and power management updates for 3.14-rc1
- ACPI core changes to make it create a struct acpi_device object for every
device represented in the ACPI tables during all namespace scans regardless
of the current status of that device. In accordance with this, ACPI hotplug
operations will not delete those objects, unless the underlying ACPI tables
go away.
- On top of the above, new sysfs attribute for ACPI device objects allowing
user space to check device status by triggering the execution of _STA for
its ACPI object. From Srinivas Pandruvada.
- ACPI core hotplug changes reducing code duplication, integrating the
PCI root hotplug with the core and reworking container hotplug.
- ACPI core simplifications making it use ACPI_COMPANION() in the code
"glueing" ACPI device objects to "physical" devices.
- ACPICA update to upstream version 20131218. This adds support for the
DBG2 and PCCT tables to ACPICA, fixes some bugs and improves debug
facilities. From Bob Moore, Lv Zheng and Betty Dall.
- Init code change to carry out the early ACPI initialization earlier.
That should allow us to use ACPI during the timekeeping initialization
and possibly to simplify the EFI initialization too. From Chun-Yi Lee.
- Clenups of the inclusions of ACPI headers in many places all over from
Lv Zheng and Rashika Kheria (work in progress).
- New helper for ACPI _DSM execution and rework of the code in drivers
that uses _DSM to execute it via the new helper. From Jiang Liu.
- New Win8 OSI blacklist entries from Takashi Iwai.
- Assorted ACPI fixes and cleanups from Al Stone, Emil Goode, Hanjun Guo,
Lan Tianyu, Masanari Iida, Oliver Neukum, Prarit Bhargava, Rashika Kheria,
Tang Chen, Zhang Rui.
- intel_pstate driver updates, including proper Baytrail support, from
Dirk Brandewie and intel_pstate documentation from Ramkumar Ramachandra.
- Generic CPU boost ("turbo") support for cpufreq from Lukasz Majewski.
- powernow-k6 cpufreq driver fixes from Mikulas Patocka.
- cpufreq core fixes and cleanups from Viresh Kumar, Jane Li, Mark Brown.
- Assorted cpufreq drivers fixes and cleanups from Anson Huang, John Tobias,
Paul Bolle, Paul Walmsley, Sachin Kamat, Shawn Guo, Viresh Kumar.
- cpuidle cleanups from Bartlomiej Zolnierkiewicz.
- Support for hibernation APM events from Bin Shi.
- Hibernation fix to avoid bringing up nonboot CPUs with ACPI EC disabled
during thaw transitions from Bjørn Mork.
- PM core fixes and cleanups from Ben Dooks, Leonardo Potenza, Ulf Hansson.
- PNP subsystem fixes and cleanups from Dmitry Torokhov, Levente Kurusa,
Rashika Kheria.
- New tool for profiling system suspend from Todd E Brandt and a cpupower
tool cleanup from One Thousand Gnomes.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=dRf6
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management updates from Rafael Wysocki:
"As far as the number of commits goes, the top spot belongs to ACPI
this time with cpufreq in the second position and a handful of PM
core, PNP and cpuidle updates. They are fixes and cleanups mostly, as
usual, with a couple of new features in the mix.
The most visible change is probably that we will create struct
acpi_device objects (visible in sysfs) for all devices represented in
the ACPI tables regardless of their status and there will be a new
sysfs attribute under those objects allowing user space to check that
status via _STA.
Consequently, ACPI device eject or generally hot-removal will not
delete those objects, unless the table containing the corresponding
namespace nodes is unloaded, which is extremely rare. Also ACPI
container hotplug will be handled quite a bit differently and cpufreq
will support CPU boost ("turbo") generically and not only in the
acpi-cpufreq driver.
Specifics:
- ACPI core changes to make it create a struct acpi_device object for
every device represented in the ACPI tables during all namespace
scans regardless of the current status of that device. In
accordance with this, ACPI hotplug operations will not delete those
objects, unless the underlying ACPI tables go away.
- On top of the above, new sysfs attribute for ACPI device objects
allowing user space to check device status by triggering the
execution of _STA for its ACPI object. From Srinivas Pandruvada.
- ACPI core hotplug changes reducing code duplication, integrating
the PCI root hotplug with the core and reworking container hotplug.
- ACPI core simplifications making it use ACPI_COMPANION() in the
code "glueing" ACPI device objects to "physical" devices.
- ACPICA update to upstream version 20131218. This adds support for
the DBG2 and PCCT tables to ACPICA, fixes some bugs and improves
debug facilities. From Bob Moore, Lv Zheng and Betty Dall.
- Init code change to carry out the early ACPI initialization
earlier. That should allow us to use ACPI during the timekeeping
initialization and possibly to simplify the EFI initialization too.
From Chun-Yi Lee.
- Clenups of the inclusions of ACPI headers in many places all over
from Lv Zheng and Rashika Kheria (work in progress).
- New helper for ACPI _DSM execution and rework of the code in
drivers that uses _DSM to execute it via the new helper. From
Jiang Liu.
- New Win8 OSI blacklist entries from Takashi Iwai.
- Assorted ACPI fixes and cleanups from Al Stone, Emil Goode, Hanjun
Guo, Lan Tianyu, Masanari Iida, Oliver Neukum, Prarit Bhargava,
Rashika Kheria, Tang Chen, Zhang Rui.
- intel_pstate driver updates, including proper Baytrail support,
from Dirk Brandewie and intel_pstate documentation from Ramkumar
Ramachandra.
- Generic CPU boost ("turbo") support for cpufreq from Lukasz
Majewski.
- powernow-k6 cpufreq driver fixes from Mikulas Patocka.
- cpufreq core fixes and cleanups from Viresh Kumar, Jane Li, Mark
Brown.
- Assorted cpufreq drivers fixes and cleanups from Anson Huang, John
Tobias, Paul Bolle, Paul Walmsley, Sachin Kamat, Shawn Guo, Viresh
Kumar.
- cpuidle cleanups from Bartlomiej Zolnierkiewicz.
- Support for hibernation APM events from Bin Shi.
- Hibernation fix to avoid bringing up nonboot CPUs with ACPI EC
disabled during thaw transitions from Bjørn Mork.
- PM core fixes and cleanups from Ben Dooks, Leonardo Potenza, Ulf
Hansson.
- PNP subsystem fixes and cleanups from Dmitry Torokhov, Levente
Kurusa, Rashika Kheria.
- New tool for profiling system suspend from Todd E Brandt and a
cpupower tool cleanup from One Thousand Gnomes"
* tag 'pm+acpi-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (153 commits)
thermal: exynos: boost: Automatic enable/disable of BOOST feature (at Exynos4412)
cpufreq: exynos4x12: Change L0 driver data to CPUFREQ_BOOST_FREQ
Documentation: cpufreq / boost: Update BOOST documentation
cpufreq: exynos: Extend Exynos cpufreq driver to support boost
cpufreq / boost: Kconfig: Support for software-managed BOOST
acpi-cpufreq: Adjust the code to use the common boost attribute
cpufreq: Add boost frequency support in core
intel_pstate: Add trace point to report internal state.
cpufreq: introduce cpufreq_generic_get() routine
ARM: SA1100: Create dummy clk_get_rate() to avoid build failures
cpufreq: stats: create sysfs entries when cpufreq_stats is a module
cpufreq: stats: free table and remove sysfs entry in a single routine
cpufreq: stats: remove hotplug notifiers
cpufreq: stats: handle cpufreq_unregister_driver() and suspend/resume properly
cpufreq: speedstep: remove unused speedstep_get_state
platform: introduce OF style 'modalias' support for platform bus
PM / tools: new tool for suspend/resume performance optimization
ACPI: fix module autoloading for ACPI enumerated devices
ACPI: add module autoloading support for ACPI enumerated devices
ACPI: fix create_modalias() return value handling
...
|
|
|
Linus Torvalds
|
e1ba84597c |
PCI changes for the v3.14 merge window:
Resource management
- Change pci_bus_region addresses to dma_addr_t (Bjorn Helgaas)
- Support 64-bit AGP BARs (Bjorn Helgaas, Yinghai Lu)
- Add pci_bus_address() to get bus address of a BAR (Bjorn Helgaas)
- Use pci_resource_start() for CPU address of AGP BARs (Bjorn Helgaas)
- Enforce bus address limits in resource allocation (Yinghai Lu)
- Allocate 64-bit BARs above 4G when possible (Yinghai Lu)
- Convert pcibios_resource_to_bus() to take pci_bus, not pci_dev (Yinghai Lu)
PCI device hotplug
- Major rescan/remove locking update (Rafael J. Wysocki)
- Make ioapic builtin only (not modular) (Yinghai Lu)
- Fix release/free issues (Yinghai Lu)
- Clean up pciehp (Bjorn Helgaas)
- Announce pciehp slot info during enumeration (Bjorn Helgaas)
MSI
- Add pci_msi_vec_count(), pci_msix_vec_count() (Alexander Gordeev)
- Add pci_enable_msi_range(), pci_enable_msix_range() (Alexander Gordeev)
- Deprecate "tri-state" interfaces: fail/success/fail+info (Alexander Gordeev)
- Export MSI mode using attributes, not kobjects (Greg Kroah-Hartman)
- Drop "irq" param from *_restore_msi_irqs() (DuanZhenzhong)
SR-IOV
- Clear NumVFs when disabling SR-IOV in sriov_init() (ethan.zhao)
Virtualization
- Add support for save/restore of extended capabilities (Alex Williamson)
- Add Virtual Channel to save/restore support (Alex Williamson)
- Never treat a VF as a multifunction device (Alex Williamson)
- Add pci_try_reset_function(), et al (Alex Williamson)
AER
- Ignore non-PCIe error sources (Betty Dall)
- Support ACPI HEST error sources for domains other than 0 (Betty Dall)
- Consolidate HEST error source parsers (Bjorn Helgaas)
- Add a TLP header print helper (Borislav Petkov)
Freescale i.MX6
- Remove unnecessary code (Fabio Estevam)
- Make reset-gpio optional (Marek Vasut)
- Report "link up" only after link training completes (Marek Vasut)
- Start link in Gen1 before negotiating for Gen2 mode (Marek Vasut)
- Fix PCIe startup code (Richard Zhu)
Marvell MVEBU
- Remove duplicate of_clk_get_by_name() call (Andrew Lunn)
- Drop writes to bridge Secondary Status register (Jason Gunthorpe)
- Obey bridge PCI_COMMAND_MEM and PCI_COMMAND_IO bits (Jason Gunthorpe)
- Support a bridge with no IO port window (Jason Gunthorpe)
- Use max_t() instead of max(resource_size_t,) (Jingoo Han)
- Remove redundant of_match_ptr (Sachin Kamat)
- Call pci_ioremap_io() at startup instead of dynamically (Thomas Petazzoni)
NVIDIA Tegra
- Disable Gen2 for Tegra20 and Tegra30 (Eric Brower)
Renesas R-Car
- Add runtime PM support (Valentine Barshak)
- Fix rcar_pci_probe() return value check (Wei Yongjun)
Synopsys DesignWare
- Fix crash in dw_msi_teardown_irq() (Bjørn Erik Nilsen)
- Remove redundant call to pci_write_config_word() (Bjørn Erik Nilsen)
- Fix missing MSI IRQs (Harro Haan)
- Add dw_pcie prefix before cfg_read/write (Pratyush Anand)
- Fix I/O transfers by using CPU (not realio) address (Pratyush Anand)
- Whitespace cleanup (Jingoo Han)
EISA
- Call put_device() if device_register() fails (Levente Kurusa)
- Revert EISA initialization breakage ((Bjorn Helgaas)
Miscellaneous
- Remove unused code, including PCIe 3.0 interfaces (Stephen Hemminger)
- Prevent bus conflicts while checking for bridge apertures (Bjorn Helgaas)
- Stop clearing bridge Secondary Status when setting up I/O aperture (Bjorn Helgaas)
- Use dev_is_pci() to identify PCI devices (Yijing Wang)
- Deprecate DEFINE_PCI_DEVICE_TABLE (Joe Perches)
- Update documentation 00-INDEX (Erik Ekman)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=La1R
-----END PGP SIGNATURE-----
Merge tag 'pci-v3.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"PCI changes for the v3.14 merge window:
Resource management
- Change pci_bus_region addresses to dma_addr_t (Bjorn Helgaas)
- Support 64-bit AGP BARs (Bjorn Helgaas, Yinghai Lu)
- Add pci_bus_address() to get bus address of a BAR (Bjorn Helgaas)
- Use pci_resource_start() for CPU address of AGP BARs (Bjorn Helgaas)
- Enforce bus address limits in resource allocation (Yinghai Lu)
- Allocate 64-bit BARs above 4G when possible (Yinghai Lu)
- Convert pcibios_resource_to_bus() to take pci_bus, not pci_dev (Yinghai Lu)
PCI device hotplug
- Major rescan/remove locking update (Rafael J. Wysocki)
- Make ioapic builtin only (not modular) (Yinghai Lu)
- Fix release/free issues (Yinghai Lu)
- Clean up pciehp (Bjorn Helgaas)
- Announce pciehp slot info during enumeration (Bjorn Helgaas)
MSI
- Add pci_msi_vec_count(), pci_msix_vec_count() (Alexander Gordeev)
- Add pci_enable_msi_range(), pci_enable_msix_range() (Alexander Gordeev)
- Deprecate "tri-state" interfaces: fail/success/fail+info (Alexander Gordeev)
- Export MSI mode using attributes, not kobjects (Greg Kroah-Hartman)
- Drop "irq" param from *_restore_msi_irqs() (DuanZhenzhong)
SR-IOV
- Clear NumVFs when disabling SR-IOV in sriov_init() (ethan.zhao)
Virtualization
- Add support for save/restore of extended capabilities (Alex Williamson)
- Add Virtual Channel to save/restore support (Alex Williamson)
- Never treat a VF as a multifunction device (Alex Williamson)
- Add pci_try_reset_function(), et al (Alex Williamson)
AER
- Ignore non-PCIe error sources (Betty Dall)
- Support ACPI HEST error sources for domains other than 0 (Betty Dall)
- Consolidate HEST error source parsers (Bjorn Helgaas)
- Add a TLP header print helper (Borislav Petkov)
Freescale i.MX6
- Remove unnecessary code (Fabio Estevam)
- Make reset-gpio optional (Marek Vasut)
- Report "link up" only after link training completes (Marek Vasut)
- Start link in Gen1 before negotiating for Gen2 mode (Marek Vasut)
- Fix PCIe startup code (Richard Zhu)
Marvell MVEBU
- Remove duplicate of_clk_get_by_name() call (Andrew Lunn)
- Drop writes to bridge Secondary Status register (Jason Gunthorpe)
- Obey bridge PCI_COMMAND_MEM and PCI_COMMAND_IO bits (Jason Gunthorpe)
- Support a bridge with no IO port window (Jason Gunthorpe)
- Use max_t() instead of max(resource_size_t,) (Jingoo Han)
- Remove redundant of_match_ptr (Sachin Kamat)
- Call pci_ioremap_io() at startup instead of dynamically (Thomas Petazzoni)
NVIDIA Tegra
- Disable Gen2 for Tegra20 and Tegra30 (Eric Brower)
Renesas R-Car
- Add runtime PM support (Valentine Barshak)
- Fix rcar_pci_probe() return value check (Wei Yongjun)
Synopsys DesignWare
- Fix crash in dw_msi_teardown_irq() (Bjørn Erik Nilsen)
- Remove redundant call to pci_write_config_word() (Bjørn Erik Nilsen)
- Fix missing MSI IRQs (Harro Haan)
- Add dw_pcie prefix before cfg_read/write (Pratyush Anand)
- Fix I/O transfers by using CPU (not realio) address (Pratyush Anand)
- Whitespace cleanup (Jingoo Han)
EISA
- Call put_device() if device_register() fails (Levente Kurusa)
- Revert EISA initialization breakage ((Bjorn Helgaas)
Miscellaneous
- Remove unused code, including PCIe 3.0 interfaces (Stephen Hemminger)
- Prevent bus conflicts while checking for bridge apertures (Bjorn Helgaas)
- Stop clearing bridge Secondary Status when setting up I/O aperture (Bjorn Helgaas)
- Use dev_is_pci() to identify PCI devices (Yijing Wang)
- Deprecate DEFINE_PCI_DEVICE_TABLE (Joe Perches)
- Update documentation 00-INDEX (Erik Ekman)"
* tag 'pci-v3.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (119 commits)
Revert "EISA: Initialize device before its resources"
Revert "EISA: Log device resources in dmesg"
vfio-pci: Use pci "try" reset interface
PCI: Check parent kobject in pci_destroy_dev()
xen/pcifront: Use global PCI rescan-remove locking
powerpc/eeh: Use global PCI rescan-remove locking
PCI: Fix pci_check_and_unmask_intx() comment typos
PCI: Add pci_try_reset_function(), pci_try_reset_slot(), pci_try_reset_bus()
MPT / PCI: Use pci_stop_and_remove_bus_device_locked()
platform / x86: Use global PCI rescan-remove locking
PCI: hotplug: Use global PCI rescan-remove locking
pcmcia: Use global PCI rescan-remove locking
ACPI / hotplug / PCI: Use global PCI rescan-remove locking
ACPI / PCI: Use global PCI rescan-remove locking in PCI root hotplug
PCI: Add global pci_lock_rescan_remove()
PCI: Cleanup pci.h whitespace
PCI: Reorder so actual code comes before stubs
PCI/AER: Support ACPI HEST AER error sources for PCI domains other than 0
ACPICA: Add helper macros to extract bus/segment numbers from HEST table.
PCI: Make local functions static
...
|
|
|
Rafael J. Wysocki
|
9217a98467 |
ACPI / hotplug / PCI: Use global PCI rescan-remove locking
Multiple race conditions are possible between the ACPI-based PCI hotplug (ACPIPHP) and the generic PCI bus rescan and device removal that can be triggered via sysfs. To avoid those race conditions make the ACPIPHP code use global PCI rescan-remove locking. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
|
|
Rafael J. Wysocki
|
d1badf8d43 |
Merge branch 'acpi-pci-hotplug' into acpi-hotplug
Conflicts: include/acpi/acpi_bus.h |
|
|
Rafael J. Wysocki
|
f244d8b623 |
ACPIPHP / radeon / nouveau: Fix VGA switcheroo problem related to hotplug
The changes in the ACPI-based PCI hotplug (ACPIPHP) subsystem made
during the 3.12 development cycle uncovered a problem with VGA
switcheroo that on some systems, when the device-specific method
(ATPX in the radeon case, _DSM in the nouveau case) is used to turn
off the discrete graphics, the BIOS generates ACPI hotplug events for
that device and those events cause ACPIPHP to attempt to remove the
device from the system (they are events for a device that was present
previously and is not present any more, so that's what should be done
according to the spec). Then, the system stops functioning correctly.
Since the hotplug events in question were simply silently ignored
previously, the least intrusive way to address that problem is to
make ACPIPHP ignore them again. For this purpose, introduce a new
ACPI device flag, no_hotplug, and modify ACPIPHP to ignore hotplug
events for PCI devices whose ACPI companions have that flag set.
Next, make the radeon and nouveau switcheroo detection code set the
no_hotplug flag for the discrete graphics' ACPI companion.
Fixes:
|
|
|
Rafael J. Wysocki
|
8ff47aafb2 | Merge branch 'acpi-pci-hotplug' into acpi-hotplug | |
|
Toshi Kani
|
f26ca1d699 |
ACPI / PCI / hotplug: Avoid warning when _ADR not present
acpiphp_enumerate_slots() walks ACPI namenamespace under a PCI host bridge with callback register_slot(). register_slot() evaluates _ADR for all the device objects and emits a warning message for any error. Some platforms have _HID device objects (such as HPET and IPMI), which trigger unnecessary warning messages. This patch avoids emitting a warning message when a target device object does not have _ADR. Signed-off-by: Toshi Kani <toshi.kani@hp.com> Cc: 3.12+ <stable@vger.kernel.org> # 3.12+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
|
|
Rafael J. Wysocki
|
202317a573 |
ACPI / scan: Add acpi_device objects for all device nodes in the namespace
Modify the ACPI namespace scanning code to register a struct acpi_device object for every namespace node representing a device, processor and so on, even if the device represented by that namespace node is reported to be not present and not functional by _STA. There are multiple reasons to do that. First of all, it avoids quite a lot of overhead when struct acpi_device objects are deleted every time acpi_bus_trim() is run and then added again by a subsequent acpi_bus_scan() for the same scope, although the namespace objects they correspond to stay in memory all the time (which always is the case on a vast majority of systems). Second, it will allow user space to see that there are namespace nodes representing devices that are not present at the moment and may be added to the system. It will also allow user space to evaluate _SUN for those nodes to check what physical slots the "missing" devices may be put into and it will make sense to add a sysfs attribute for _STA evaluation after this change (that will be useful for thermal management on some systems). Next, it will help to consolidate the ACPI hotplug handling among subsystems by making it possible to store hotplug-related information in struct acpi_device objects in a standard common way. Finally, it will help to avoid a race condition related to the deletion of ACPI namespace nodes. Namely, namespace nodes may be deleted as a result of a table unload triggered by _EJ0 or _DCK. If a hotplug notification for one of those nodes is triggered right before the deletion and it executes a hotplug callback via acpi_hotplug_execute(), the ACPI handle passed to that callback may be stale when the callback actually runs. One way to work around that is to always pass struct acpi_device pointers to hotplug callbacks after doing a get_device() on the objects in question which eliminates the use-after-free possibility (the ACPI handles in those objects are invalidated by acpi_scan_drop_device(), so they will trigger ACPICA errors on attempts to use them). Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> |
|
|
Bjorn Helgaas
|
f7625980f5 |
PCI: Fix whitespace, capitalization, and spelling errors
Fix whitespace, capitalization, and spelling errors. No functional change. I know "busses" is not an error, but "buses" was more common, so I used it consistently. Signed-off-by: Marta Rybczynska <rybczynska@gmail.com> (pci_reset_bridge_secondary_bus()) Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
|
|
Linus Torvalds
|
2f466d33f5 |
PCI changes for the v3.13 merge window:
Resource management
- Fix host bridge window coalescing (Alexey Neyman)
- Pass type, width, and prefetchability for window alignment (Wei Yang)
PCI device hotplug
- Convert acpiphp, acpiphp_ibm to dynamic debug (Lan Tianyu)
Power management
- Remove pci_pm_complete() (Liu Chuansheng)
MSI
- Fail initialization if device is not in PCI_D0 (Yijing Wang)
MPS (Max Payload Size)
- Use pcie_get_mps() and pcie_set_mps() to simplify code (Yijing Wang)
- Use pcie_set_readrq() to simplify code (Yijing Wang)
- Use cached pci_dev->pcie_mpss to simplify code (Yijing Wang)
SR-IOV
- Enable upstream bridges even for VFs on virtual buses (Bjorn Helgaas)
- Use pci_is_root_bus() to avoid catching virtual buses (Wei Yang)
Virtualization
- Add x86 MSI masking ops (Konrad Rzeszutek Wilk)
Freescale i.MX6
- Support i.MX6 PCIe controller (Sean Cross)
- Increase link startup timeout (Marek Vasut)
- Probe PCIe in fs_initcall() (Marek Vasut)
- Fix imprecise abort handler (Tim Harvey)
- Remove redundant of_match_ptr (Sachin Kamat)
Renesas R-Car
- Support Gen2 internal PCIe controller (Valentine Barshak)
Samsung Exynos
- Add MSI support (Jingoo Han)
- Turn off power when link fails (Jingoo Han)
- Add Jingoo Han as maintainer (Jingoo Han)
- Add clk_disable_unprepare() on error path (Wei Yongjun)
- Remove redundant of_match_ptr (Sachin Kamat)
Synopsys DesignWare
- Add irq_create_mapping() (Pratyush Anand)
- Add header guards (Seungwon Jeon)
Miscellaneous
- Enable native PCIe services by default on non-ACPI (Andrew Murray)
- Cleanup _OSC usage and messages (Bjorn Helgaas)
- Remove pcibios_last_bus boot option on non-x86 (Bjorn Helgaas)
- Convert bus code to use bus_, drv_, and dev_groups (Greg Kroah-Hartman)
- Remove unused pci_mem_start (Myron Stowe)
- Make sysfs functions static (Sachin Kamat)
- Warn on invalid return from driver probe (Stephen M. Cameron)
- Remove Intel Haswell D3 delays (Todd E Brandt)
- Call pci_set_master() in core if driver doesn't do it (Yinghai Lu)
- Use pci_is_pcie() to simplify code (Yijing Wang)
- Use PCIe capability accessors to simplify code (Yijing Wang)
- Use cached pci_dev->pcie_cap to simplify code (Yijing Wang)
- Removed unused "is_pcie" from struct pci_dev (Yijing Wang)
- Simplify sysfs CPU affinity implementation (Yijing Wang))
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=CTPk
-----END PGP SIGNATURE-----
Merge tag 'pci-v3.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI changes from Bjorn Helgaas:
"Resource management
- Fix host bridge window coalescing (Alexey Neyman)
- Pass type, width, and prefetchability for window alignment (Wei Yang)
PCI device hotplug
- Convert acpiphp, acpiphp_ibm to dynamic debug (Lan Tianyu)
Power management
- Remove pci_pm_complete() (Liu Chuansheng)
MSI
- Fail initialization if device is not in PCI_D0 (Yijing Wang)
MPS (Max Payload Size)
- Use pcie_get_mps() and pcie_set_mps() to simplify code (Yijing Wang)
- Use pcie_set_readrq() to simplify code (Yijing Wang)
- Use cached pci_dev->pcie_mpss to simplify code (Yijing Wang)
SR-IOV
- Enable upstream bridges even for VFs on virtual buses (Bjorn Helgaas)
- Use pci_is_root_bus() to avoid catching virtual buses (Wei Yang)
Virtualization
- Add x86 MSI masking ops (Konrad Rzeszutek Wilk)
Freescale i.MX6
- Support i.MX6 PCIe controller (Sean Cross)
- Increase link startup timeout (Marek Vasut)
- Probe PCIe in fs_initcall() (Marek Vasut)
- Fix imprecise abort handler (Tim Harvey)
- Remove redundant of_match_ptr (Sachin Kamat)
Renesas R-Car
- Support Gen2 internal PCIe controller (Valentine Barshak)
Samsung Exynos
- Add MSI support (Jingoo Han)
- Turn off power when link fails (Jingoo Han)
- Add Jingoo Han as maintainer (Jingoo Han)
- Add clk_disable_unprepare() on error path (Wei Yongjun)
- Remove redundant of_match_ptr (Sachin Kamat)
Synopsys DesignWare
- Add irq_create_mapping() (Pratyush Anand)
- Add header guards (Seungwon Jeon)
Miscellaneous
- Enable native PCIe services by default on non-ACPI (Andrew Murray)
- Cleanup _OSC usage and messages (Bjorn Helgaas)
- Remove pcibios_last_bus boot option on non-x86 (Bjorn Helgaas)
- Convert bus code to use bus_, drv_, and dev_groups (Greg Kroah-Hartman)
- Remove unused pci_mem_start (Myron Stowe)
- Make sysfs functions static (Sachin Kamat)
- Warn on invalid return from driver probe (Stephen M. Cameron)
- Remove Intel Haswell D3 delays (Todd E Brandt)
- Call pci_set_master() in core if driver doesn't do it (Yinghai Lu)
- Use pci_is_pcie() to simplify code (Yijing Wang)
- Use PCIe capability accessors to simplify code (Yijing Wang)
- Use cached pci_dev->pcie_cap to simplify code (Yijing Wang)
- Removed unused "is_pcie" from struct pci_dev (Yijing Wang)
- Simplify sysfs CPU affinity implementation (Yijing Wang)"
* tag 'pci-v3.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (79 commits)
PCI: Enable upstream bridges even for VFs on virtual buses
PCI: Add pci_upstream_bridge()
PCI: Add x86_msi.msi_mask_irq() and msix_mask_irq()
PCI: Warn on driver probe return value greater than zero
PCI: Drop warning about drivers that don't use pci_set_master()
PCI: Workaround missing pci_set_master in pci drivers
powerpc/pci: Use pci_is_pcie() to simplify code [fix]
PCI: Update pcie_ports 'auto' behavior for non-ACPI platforms
PCI: imx6: Probe the PCIe in fs_initcall()
PCI: Add R-Car Gen2 internal PCI support
PCI: imx6: Remove redundant of_match_ptr
PCI: Report pci_pme_active() kmalloc failure
mn10300/PCI: Remove useless pcibios_last_bus
frv/PCI: Remove pcibios_last_bus
PCI: imx6: Increase link startup timeout
PCI: exynos: Remove redundant of_match_ptr
PCI: imx6: Fix imprecise abort handler
PCI: Fail MSI/MSI-X initialization if device is not in PCI_D0
PCI: imx6: Remove redundant dev_err() in imx6_pcie_probe()
x86/PCI: Coalesce multiple overlapping host bridge windows
...
|
|
|
Linus Torvalds
|
f9300eaaac |
ACPI and power management updates for 3.13-rc1
- New power capping framework and the the Intel Running Average Power
Limit (RAPL) driver using it from Srinivas Pandruvada and Jacob Pan.
- Addition of the in-kernel switching feature to the arm_big_little
cpufreq driver from Viresh Kumar and Nicolas Pitre.
- cpufreq support for iMac G5 from Aaro Koskinen.
- Baytrail processors support for intel_pstate from Dirk Brandewie.
- cpufreq support for Midway/ECX-2000 from Mark Langsdorf.
- ARM vexpress/TC2 cpufreq support from Sudeep KarkadaNagesha.
- ACPI power management support for the I2C and SPI bus types from
Mika Westerberg and Lv Zheng.
- cpufreq core fixes and cleanups from Viresh Kumar, Srivatsa S Bhat,
Stratos Karafotis, Xiaoguang Chen, Lan Tianyu.
- cpufreq drivers updates (mostly fixes and cleanups) from Viresh Kumar,
Aaro Koskinen, Jungseok Lee, Sudeep KarkadaNagesha, Lukasz Majewski,
Manish Badarkhe, Hans-Christian Egtvedt, Evgeny Kapaev.
- intel_pstate updates from Dirk Brandewie and Adrian Huang.
- ACPICA update to version 20130927 includig fixes and cleanups and
some reduction of divergences between the ACPICA code in the kernel
and ACPICA upstream in order to improve the automatic ACPICA patch
generation process. From Bob Moore, Lv Zheng, Tomasz Nowicki,
Naresh Bhat, Bjorn Helgaas, David E Box.
- ACPI IPMI driver fixes and cleanups from Lv Zheng.
- ACPI hotplug fixes and cleanups from Bjorn Helgaas, Toshi Kani,
Zhang Yanfei, Rafael J Wysocki.
- Conversion of the ACPI AC driver to the platform bus type and
multiple driver fixes and cleanups related to ACPI from Zhang Rui.
- ACPI processor driver fixes and cleanups from Hanjun Guo, Jiang Liu,
Bartlomiej Zolnierkiewicz, Mathieu Rhéaume, Rafael J Wysocki.
- Fixes and cleanups and new blacklist entries related to the ACPI
video support from Aaron Lu, Felipe Contreras, Lennart Poettering,
Kirill Tkhai.
- cpuidle core cleanups from Viresh Kumar and Lorenzo Pieralisi.
- cpuidle drivers fixes and cleanups from Daniel Lezcano, Jingoo Han,
Bartlomiej Zolnierkiewicz, Prarit Bhargava.
- devfreq updates from Sachin Kamat, Dan Carpenter, Manish Badarkhe.
- Operation Performance Points (OPP) core updates from Nishanth Menon.
- Runtime power management core fix from Rafael J Wysocki and update
from Ulf Hansson.
- Hibernation fixes from Aaron Lu and Rafael J Wysocki.
- Device suspend/resume lockup detection mechanism from Benoit Goby.
- Removal of unused proc directories created for various ACPI drivers
from Lan Tianyu.
- ACPI LPSS driver fix and new device IDs for the ACPI platform scan
handler from Heikki Krogerus and Jarkko Nikula.
- New ACPI _OSI blacklist entry for Toshiba NB100 from Levente Kurusa.
- Assorted fixes and cleanups related to ACPI from Andy Shevchenko,
Al Stone, Bartlomiej Zolnierkiewicz, Colin Ian King, Dan Carpenter,
Felipe Contreras, Jianguo Wu, Lan Tianyu, Yinghai Lu, Mathias Krause,
Liu Chuansheng.
- Assorted PM fixes and cleanups from Andy Shevchenko, Thierry Reding,
Jean-Christophe Plagniol-Villard.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=JCxk
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management updates from Rafael J Wysocki:
- New power capping framework and the the Intel Running Average Power
Limit (RAPL) driver using it from Srinivas Pandruvada and Jacob Pan.
- Addition of the in-kernel switching feature to the arm_big_little
cpufreq driver from Viresh Kumar and Nicolas Pitre.
- cpufreq support for iMac G5 from Aaro Koskinen.
- Baytrail processors support for intel_pstate from Dirk Brandewie.
- cpufreq support for Midway/ECX-2000 from Mark Langsdorf.
- ARM vexpress/TC2 cpufreq support from Sudeep KarkadaNagesha.
- ACPI power management support for the I2C and SPI bus types from Mika
Westerberg and Lv Zheng.
- cpufreq core fixes and cleanups from Viresh Kumar, Srivatsa S Bhat,
Stratos Karafotis, Xiaoguang Chen, Lan Tianyu.
- cpufreq drivers updates (mostly fixes and cleanups) from Viresh
Kumar, Aaro Koskinen, Jungseok Lee, Sudeep KarkadaNagesha, Lukasz
Majewski, Manish Badarkhe, Hans-Christian Egtvedt, Evgeny Kapaev.
- intel_pstate updates from Dirk Brandewie and Adrian Huang.
- ACPICA update to version 20130927 includig fixes and cleanups and
some reduction of divergences between the ACPICA code in the kernel
and ACPICA upstream in order to improve the automatic ACPICA patch
generation process. From Bob Moore, Lv Zheng, Tomasz Nowicki, Naresh
Bhat, Bjorn Helgaas, David E Box.
- ACPI IPMI driver fixes and cleanups from Lv Zheng.
- ACPI hotplug fixes and cleanups from Bjorn Helgaas, Toshi Kani, Zhang
Yanfei, Rafael J Wysocki.
- Conversion of the ACPI AC driver to the platform bus type and
multiple driver fixes and cleanups related to ACPI from Zhang Rui.
- ACPI processor driver fixes and cleanups from Hanjun Guo, Jiang Liu,
Bartlomiej Zolnierkiewicz, Mathieu Rhéaume, Rafael J Wysocki.
- Fixes and cleanups and new blacklist entries related to the ACPI
video support from Aaron Lu, Felipe Contreras, Lennart Poettering,
Kirill Tkhai.
- cpuidle core cleanups from Viresh Kumar and Lorenzo Pieralisi.
- cpuidle drivers fixes and cleanups from Daniel Lezcano, Jingoo Han,
Bartlomiej Zolnierkiewicz, Prarit Bhargava.
- devfreq updates from Sachin Kamat, Dan Carpenter, Manish Badarkhe.
- Operation Performance Points (OPP) core updates from Nishanth Menon.
- Runtime power management core fix from Rafael J Wysocki and update
from Ulf Hansson.
- Hibernation fixes from Aaron Lu and Rafael J Wysocki.
- Device suspend/resume lockup detection mechanism from Benoit Goby.
- Removal of unused proc directories created for various ACPI drivers
from Lan Tianyu.
- ACPI LPSS driver fix and new device IDs for the ACPI platform scan
handler from Heikki Krogerus and Jarkko Nikula.
- New ACPI _OSI blacklist entry for Toshiba NB100 from Levente Kurusa.
- Assorted fixes and cleanups related to ACPI from Andy Shevchenko, Al
Stone, Bartlomiej Zolnierkiewicz, Colin Ian King, Dan Carpenter,
Felipe Contreras, Jianguo Wu, Lan Tianyu, Yinghai Lu, Mathias Krause,
Liu Chuansheng.
- Assorted PM fixes and cleanups from Andy Shevchenko, Thierry Reding,
Jean-Christophe Plagniol-Villard.
* tag 'pm+acpi-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (386 commits)
cpufreq: conservative: fix requested_freq reduction issue
ACPI / hotplug: Consolidate deferred execution of ACPI hotplug routines
PM / runtime: Use pm_runtime_put_sync() in __device_release_driver()
ACPI / event: remove unneeded NULL pointer check
Revert "ACPI / video: Ignore BIOS initial backlight value for HP 250 G1"
ACPI / video: Quirk initial backlight level 0
ACPI / video: Fix initial level validity test
intel_pstate: skip the driver if ACPI has power mgmt option
PM / hibernate: Avoid overflow in hibernate_preallocate_memory()
ACPI / hotplug: Do not execute "insert in progress" _OST
ACPI / hotplug: Carry out PCI root eject directly
ACPI / hotplug: Merge device hot-removal routines
ACPI / hotplug: Make acpi_bus_hot_remove_device() internal
ACPI / hotplug: Simplify device ejection routines
ACPI / hotplug: Fix handle_root_bridge_removal()
ACPI / hotplug: Refuse to hot-remove all objects with disabled hotplug
ACPI / scan: Start matching drivers after trying scan handlers
ACPI: Remove acpi_pci_slot_init() headers from internal.h
ACPI / blacklist: fix name of ThinkPad Edge E530
PowerCap: Fix build error with option -Werror=format-security
...
Conflicts:
arch/arm/mach-omap2/opp.c
drivers/Kconfig
drivers/spi/spi.c
|
|
|
Rafael J. Wysocki
|
63ff4d0765 |
Merge branch 'acpi-hotplug'
* acpi-hotplug: ACPI / hotplug: Consolidate deferred execution of ACPI hotplug routines ACPI / hotplug: Do not execute "insert in progress" _OST ACPI / hotplug: Carry out PCI root eject directly ACPI / hotplug: Merge device hot-removal routines ACPI / hotplug: Make acpi_bus_hot_remove_device() internal ACPI / hotplug: Simplify device ejection routines ACPI / hotplug: Fix handle_root_bridge_removal() ACPI / hotplug: Refuse to hot-remove all objects with disabled hotplug ACPI / scan: Start matching drivers after trying scan handlers ACPI: Remove acpi_pci_slot_init() headers from internal.h Conflicts: include/acpi/acpiosxf.h (with the 'acpica' branch) |
|
|
Rafael J. Wysocki
|
7b98118aaa |
ACPI / hotplug: Consolidate deferred execution of ACPI hotplug routines
There are two different interfaces for queuing up work items on the ACPI hotplug workqueue, alloc_acpi_hp_work() used by PCI and PCI host bridge hotplug code and acpi_os_hotplug_execute() used by the common ACPI hotplug code and docking stations. They both are somewhat cumbersome to use and work slightly differently. The users of alloc_acpi_hp_work() have to submit a work function that will extract the necessary data items from a struct acpi_hp_work object allocated by alloc_acpi_hp_work() and then will free that object, while it would be more straightforward to simply use a work function with one more argument and let the interface take care of the execution details. The users of acpi_os_hotplug_execute() also have to deal with the fact that it takes only one argument in addition to the work function pointer, although acpi_os_execute_deferred() actually takes care of the allocation and freeing of memory, so it would have been able to pass more arguments to the work function if it hadn't been constrained by the connection with acpi_os_execute(). Moreover, while alloc_acpi_hp_work() makes GFP_KERNEL memory allocations, which is correct, because hotplug work items are always queued up from process context, acpi_os_hotplug_execute() uses GFP_ATOMIC, as that is needed by acpi_os_execute(). Also, acpi_os_execute_deferred() queued up by it waits for the ACPI event workqueues to flush before executing the work function, whereas alloc_acpi_hp_work() can't do anything similar. That leads to somewhat arbitrary differences in behavior between various ACPI hotplug code paths and has to be straightened up. For this reason, replace both alloc_acpi_hp_work() and acpi_os_hotplug_execute() with a single interface, acpi_hotplug_execute(), combining their behavior and being more friendly to its users than any of the two. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> |
|
|
Mika Westerberg
|
ab1225901d |
Revert "ACPI / hotplug / PCI: Avoid doing too much for spurious notifies"
Commit |
|
|
Rafael J. Wysocki
|
fd3cfebec3 |
ACPI / hotplug / PCI: Drop WARN_ON() from acpiphp_enumerate_slots()
The WARN_ON() in acpiphp_enumerate_slots() triggers unnecessarily for devices whose bridges are going to be handled by native PCIe hotplug (pciehp) and the simplest way to prevent that from happening is to drop the WARN_ON(). References: https://bugzilla.kernel.org/show_bug.cgi?id=62831 Reported-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
|
|
Rafael J. Wysocki
|
5d4494573c |
ACPI / hotplug / PCI: Fix error code path in acpiphp_enumerate_slots()
One of the error code paths in acpiphp_enumerate_slots() is missing a pci_dev_put(bridge->pci_dev) call, so add it. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> |
|
|
Lan Tianyu
|
bd950799d9 |
PCI: acpiphp: Convert to dynamic debug
This patch is to use pr_debug/info/warn/err to replace acpiphp debug functions and remove module's debug param. User interface change: before this patch, boot with the "acpiphp.debug" kernel parameter to turn on debug. After this patch, set CONFIG_DYNAMIC_DEBUG=y and boot with "acpiphp.dyndebug=+p" instead. See Documentation/dynamic-debug-howto.txt. [bhelgaas: changelog] Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
|
|
Rafael J. Wysocki
|
08e97ff277 |
Merge branch 'acpi-pci-hotplug'
* acpi-pci-hotplug: ACPI / hotplug / PCI: Avoid parent bus rescans on spurious device checks ACPI / hotplug / PCI: Use _OST to notify firmware about notify status ACPI / hotplug / PCI: Avoid doing too much for spurious notifies ACPI / hotplug / PCI: Don't trim devices before scanning the namespace |
|
|
Rafael J. Wysocki
|
a47d8c8e72 |
ACPI / hotplug / PCI: Avoid parent bus rescans on spurious device checks
In the current ACPIPHP notify handler we always go directly for a rescan of the parent bus if we get a device check notification for a device that is not a bridge. However, this obviously is overzealous if nothing really changes, because this way we may rescan the whole PCI hierarchy pretty much in vain. That happens on Alex Williamson's machine whose ACPI tables contain device objects that are supposed to coresspond to PCIe root ports, but those ports aren't physically present (or at least they aren't visible in the PCI config space to us). The BIOS generates multiple device check notifies for those objects during boot and for each of them we go straight for the parent bus rescan, but the parent bus is the root bus in this particular case. In consequence, we rescan the whole PCI bus from the top several times in a row, which is completely unnecessary, increases boot time by 50% (after previous fixes) and generates excess dmesg output from the PCI subsystem. Fix the problem by checking if we can find anything new in the slot corresponding to the device we've got a device check notify for and doing nothig if that's not the case. The spec (ACPI 5.0, Section 5.6.6) appears to mandate this behavior, as it says: Device Check. Used to notify OSPM that the device either appeared or disappeared. If the device has appeared, OSPM will re-enumerate from the parent. If the device has disappeared, OSPM will invalidate the state of the device. OSPM may optimize out re-enumeration. Therefore, according to the spec, we are free to do nothing if nothing changes. References: https://bugzilla.kernel.org/show_bug.cgi?id=60865 Reported-and-tested-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
|
|
Rafael J. Wysocki
|
e532e84ea1 |
ACPI / hotplug / PCI: Use _OST to notify firmware about notify status
The spec suggests that we should use _OST to notify the platform about the status of notifications it sends us, for example so that it doesn't repeate a notification that has been handled already. This turns out to help reduce the amount of diagnostic output from the ACPIPHP subsystem and speed up boot on at least one system that generates multiple device check notifies for PCIe devices on the root bus during boot. Reported-and-tested-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
|
|
Rafael J. Wysocki
|
2dc41281b1 |
ACPI / hotplug / PCI: Avoid doing too much for spurious notifies
Sometimes we may get a spurious device check or bus check notify for a hotplug device and in those cases we should avoid doing all of the configuration work needed when something actually changes. To that end, check the return value of pci_scan_slot() in enable_slot() and bail out early if it is 0. This turns out to help reduce the amount of diagnostic output from the ACPIPHP subsystem and speed up boot on at least one system that generates multiple device check notifies for PCIe devices on the root bus during boot. Reported-and-tested-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
|
|
Rafael J. Wysocki
|
89ec2f2ee1 |
ACPI / hotplug / PCI: Don't trim devices before scanning the namespace
In acpiphp_bus_add() we first remove device objects corresponding to the given handle and the ACPI namespace branch below it, which are then re-created by acpi_bus_scan(). This used to be done to clean up after surprise removals, but now we do the cleanup through trim_stale_devices() which checks if the devices in question are actually gone before removing them, so the device hierarchy trimming in acpiphp_bus_add() is not necessary any more and, moreover, it may lead to problems if it removes device objects corresponding to devices that are actually present. For this reason, remove the leftover acpiphp_bus_trim() from acpiphp_bus_add(). Reported-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
|
|
Linus Torvalds
|
a923874198 |
PCI changes for the v3.12 merge window:
PCI device hotplug
- Use PCIe native hotplug, not ACPI hotplug, when possible (Neil Horman)
- Assign resources on per-host bridge basis (Yinghai Lu)
MPS (Max Payload Size)
- Allow larger MPS settings below hotplug-capable Root Port (Yijing Wang)
- Add warnings about unsafe MPS settings (Yijing Wang)
- Simplify interface and messages (Bjorn Helgaas)
SR-IOV
- Return -ENOSYS on non-SR-IOV devices (Stefan Assmann)
- Update NumVFs register when disabling SR-IOV (Yijing Wang)
Virtualization
- Add bus and slot reset support (Alex Williamson)
- Fix ACS (Access Control Services) issues (Alex Williamson)
Miscellaneous
- Simplify PCIe Capability accessors (Bjorn Helgaas)
- Add pcibios_pm_ops for arch-specific hibernate stuff (Sebastian Ott)
- Disable decoding during BAR sizing only when necessary (Zoltan Kiss)
- Delay enabling bridges until they're needed (Yinghai Lu)
- Split Designware support into Synopsys and Exynos parts (Jingoo Han)
- Convert class code to use dev_groups (Greg Kroah-Hartman)
- Cleanup Designware and Exynos I/O access wrappers (Seungwon Jeon)
- Fix bridge I/O window alignment (Bjorn Helgaas)
- Add pci_wait_for_pending_transaction() (Casey Leedom)
- Use devm_ioremap_resource() in Marvell driver (Tushar Behera)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=uNEk
-----END PGP SIGNATURE-----
Merge tag 'pci-v3.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI changes from Bjorn Helgaas:
PCI device hotplug:
- Use PCIe native hotplug, not ACPI hotplug, when possible (Neil Horman)
- Assign resources on per-host bridge basis (Yinghai Lu)
MPS (Max Payload Size):
- Allow larger MPS settings below hotplug-capable Root Port (Yijing Wang)
- Add warnings about unsafe MPS settings (Yijing Wang)
- Simplify interface and messages (Bjorn Helgaas)
SR-IOV:
- Return -ENOSYS on non-SR-IOV devices (Stefan Assmann)
- Update NumVFs register when disabling SR-IOV (Yijing Wang)
Virtualization:
- Add bus and slot reset support (Alex Williamson)
- Fix ACS (Access Control Services) issues (Alex Williamson)
Miscellaneous:
- Simplify PCIe Capability accessors (Bjorn Helgaas)
- Add pcibios_pm_ops for arch-specific hibernate stuff (Sebastian Ott)
- Disable decoding during BAR sizing only when necessary (Zoltan Kiss)
- Delay enabling bridges until they're needed (Yinghai Lu)
- Split Designware support into Synopsys and Exynos parts (Jingoo Han)
- Convert class code to use dev_groups (Greg Kroah-Hartman)
- Cleanup Designware and Exynos I/O access wrappers (Seungwon Jeon)
- Fix bridge I/O window alignment (Bjorn Helgaas)
- Add pci_wait_for_pending_transaction() (Casey Leedom)
- Use devm_ioremap_resource() in Marvell driver (Tushar Behera)
* tag 'pci-v3.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (63 commits)
PCI/ACPI: Fix _OSC ordering to allow PCIe hotplug use when available
PCI: exynos: Add I/O access wrappers
PCI: designware: Drop "addr" arg from dw_pcie_readl_rc()/dw_pcie_writel_rc()
PCI: Remove pcie_cap_has_devctl()
PCI: Support PCIe Capability Slot registers only for ports with slots
PCI: Remove PCIe Capability version checks
PCI: Allow PCIe Capability link-related register access for switches
PCI: Add offsets of PCIe capability registers
PCI: Tidy bitmasks and spacing of PCIe capability definitions
PCI: Remove obsolete comment reference to pci_pcie_cap2()
PCI: Clarify PCI_EXP_TYPE_PCI_BRIDGE comment
PCI: Rename PCIe capability definitions to follow convention
PCI: Warn if unsafe MPS settings detected
PCI: Fix MPS peer-to-peer DMA comment syntax
PCI: Disable decoding for BAR sizing only when it was actually enabled
PCI: Add comment about needing pci_msi_off() even when CONFIG_PCI_MSI=n
PCI: Add pcibios_pm_ops for optional arch-specific hibernate functionality
PCI: Don't restrict MPS for slots below Root Ports
PCI: Simplify MPS test for Downstream Port
PCI: Remove unnecessary check for pcie_get_mps() failure
...
|
|
|
Rafael J. Wysocki
|
1aaac07112 |
ACPI / hotplug / PCI: Fix NULL pointer dereference in cleanup_bridge()
After commit
|
|
|
Yinghai Lu
|
928bea9648 |
PCI: Delay enabling bridges until they're needed
We currently enable PCI bridges after scanning a bus and assigning resources. This is often done in arch code. This patch changes this so we don't enable a bridge until necessary, i.e., until we enable a PCI device behind the bridge. We do this in the generic pci_enable_device() path, so this also removes the arch-specific code to enable bridges. [bhelgaas: changelog] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
|
|
Mika Westerberg
|
2d8b1d566a |
ACPI / hotplug / PCI: Get rid of check_sub_bridges()
Now that acpiphp_check_bridge() always enumerates devices behind the bridge, there is no need to do that for each sub-bridge anymore like it is done in the current ACPI-based PCI hotplug (ACPIPHP) code. Given this we don't need check_sub_bridges() anymore, so drop that function completely. This also simplifies the ACPIPHP code a bit. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
|
|
Rafael J. Wysocki
|
ff181e5a4f |
ACPI / hotplug / PCI: Clean up bridge_mutex usage
Do not acquire bridge_mutex around the addition of a slot to its bridge's list of slots and arount the addition of a function to its slot's list of functions, because that doesn't help anything right now (those lists are walked without any locking anyway). However, acquire bridge_mutex around the list walk in acpiphp_remove_slots() and use list_for_each_entry() there, because we terminate the walk as soon as we find the first matching entry. This prevents that list walk from colliding with bridge addition and removal. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> |
|
|
Rafael J. Wysocki
|
a1d0abcea8 |
ACPI / hotplug / PCI: Redefine enable_device() and disable_device()
Notice that functions enable_device() and disable_device() cannot fail and their return values are ignored in the majority of places, so redefine them as void and use the opportunity to change their names to enable_slot() and disable_slot(), respectively, which much better reflects what they do. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> |
|
|
Mika Westerberg
|
1ad3790ac7 |
ACPI / hotplug / PCI: Sanitize acpiphp_get_(latch)|(adapter)_status()
There is no need for a temporary variable and all the tricks with ternary operators in acpiphp_get_(latch)|(adapter)_status(). Change those functions to be a bit more straightforward. [rjw: Changelog] Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
|
|
Rafael J. Wysocki
|
4ebe34503b |
ACPI / hotplug / PCI: Check for new devices on enabled slots
The current implementation of acpiphp_check_bridge() is pretty dumb: - It enables a slot if it's not enabled and the slot status is ACPI_STA_ALL. - It disables a slot if it's enabled and the slot status is not ACPI_STA_ALL. This behavior is not sufficient to handle the Thunderbolt daisy chaining case properly, however, because in that case the bus behind the already enabled slot needs to be rescanned for new devices. For this reason, modify acpiphp_check_bridge() so that slots are disabled and stopped if they are not in the ACPI_STA_ALL state. For slots in the ACPI_STA_ALL state, devices behind them that don't respond are trimmed using a new function, trim_stale_devices(), introduced specifically for this purpose. That function walks the given bus and checks each device on it. If the device doesn't respond, it is assumed to be gone and is removed. Once all of the stale devices directy behind the slot have been removed, acpiphp_check_bridge() will start looking for new devices that might have appeared on the given bus. It will do that even if the slot is already enabled (SLOT_ENABLED is set for it). In addition to that, make the bus check notification ignore SLOT_ENABLED and go for enable_device() directly if bridge is NULL, so that devices behind the slot are re-enumerated in that case too. This change is based on earlier patches from Kirill A Shutemov and Mika Westerberg. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> |
|
|
Kirill A. Shutemov
|
b91182a67c |
ACPI / hotplug / PCI: Allow slots without new devices to be rescanned
Currently, enable_device() checks the return value of pci_scan_slot() and returns immediately if that's 0 (meaning that no new functions have been found in the slot). However, if one of the functions in the slot is a bridge, some new devices may appear below it even if the bridge itself is present continuously, so it generally is necessary to do the rescan anyway just in case. [In particular, that's necessary with the Thunderbolt daisy chaining in which case new devices may be connected to the existing ones down the chain.] The correctness of this change relies on the ability of pcibios_resource_survey_bus() to detect if it has already been called for the given bus and to skip it if so. Failure to do that will lead to resource allocation conflicts. [rjw: Changelog] Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
|
|
Kirill A. Shutemov
|
55502ddb2d |
ACPI / hotplug / PCI: Do not check SLOT_ENABLED in enable_device()
With Thunderbolt you can daisy chain devices: connect new devices to an already plugged one. In that case the "hotplug slot" is already enabled, but we still want to look for new PCI devices behind it. Reuse enable_device() to scan for new PCI devices on enabled slots and push the SLOT_ENABLED check up into acpiphp_enable_slot(). [rjw: Rebased, modified the changelog] Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
|
|
Rafael J. Wysocki
|
bc805a5539 |
ACPI / hotplug / PCI: Do not exectute _PS0 and _PS3 directly
The ACPI-based PCI hotplug (acpiphp) core code need not and really should not execute _PS0 and _PS3 directly for devices it handles. First of all, it is not necessary to put devices into D3 after acpi_bus_trim() has walked through them, because acpi_device_unregister() invoked by it puts each device into D3cold before returning. Thus after disable_device() the slot should be powered down already. Second, calling _PS0 directly on ACPI device objects may not be appropriate, because it may require power resources to be set up in a specific way in advance and that must be taken care of by the ACPI core. Thus modify acpiphp_bus_add() to power up the device using the appropriate interface after it has run acpi_bus_scan() on its handle. After that, the functions executing _PS0 and _PS3, power_on_slot() and power_off_slot(), are not necessary any more, so drop them and update the code calling them accordingly. Also drop the function flags related to device power states, since they aren't useful any more too. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> |
|
|
Rafael J. Wysocki
|
5c8d0e1dc4 |
ACPI / hotplug / PCI: Do not queue up event handling work items in vain
Modify handle_hotplug_event() to avoid queing up the execution of handle_hotplug_event_work_fn() as a work item on kacpi_hotplug_wq for non-hotplug events, such as ACPI_NOTIFY_DEVICE_WAKE. Move the code printing diagnostic messages for those events into handle_hotplug_event(). In addition to that, remove the bogus comment about how the core should distinguish between hotplug and non-hotplug events and queue them up on different workqueues. The core clearly cannot know in advance what events will be interesting to the given caller of acpi_install_notify_handler(). Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> |
|
|
Mika Westerberg
|
ad21d2d046 |
ACPI / hotplug / PCI: Consolidate slot disabling and ejecting
Both acpiphp_disable_slot() and acpiphp_eject_slot() are always called together so instead of calling each separately we can consolidate them into one function acpiphp_disable_and_eject_slot() that does both (but it will return success on _EJ0 failures that were ignored in the majority of call sites anyway). [rjw: Rebased plus minor tweaks] Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
|
|
Rafael J. Wysocki
|
07bb735378 |
ACPI / hotplug / PCI: Drop redundant checks from check_hotplug_bridge()
Two checks in check_hotplug_bridge() are redundant (they have been done by the caller already), so drop them. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> |
|
|
Rafael J. Wysocki
|
236e26245a |
ACPI / hotplug / PCI: Rework namespace scanning and trimming routines
The acpiphp_bus_trim() and acpiphp_bus_add() functions need not return error codes that are never checked, so redefine them and simplify them a bit. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> |
|
|
Rafael J. Wysocki
|
bda46dbb66 |
ACPI / hotplug / PCI: Store parent in functions and bus in slots
To avoid chasing more pointers than necessary in some situations, move the bridge pointer from struct acpiphp_slot to struct acpiphp_func (and call it 'parent') and add a bus pointer to struct acpiphp_slot. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> |
|
|
Rafael J. Wysocki
|
89373a55d2 |
ACPI / hotplug / PCI: Drop handle field from struct acpiphp_bridge
The handle field in struct acpiphp_bridge is only used by acpiphp_enumerate_slots(), but in that function the local handle variable can be used instead, so make that happen and drop handle from struct acpiphp_bridge. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> |
|
|
Rafael J. Wysocki
|
5a3bc573ae |
ACPI / hotplug / PCI: Drop handle field from struct acpiphp_func
The ACPI handle stored in struct acpiphp_func is also stored in the struct acpiphp_context object containing it and it is trivial to get from a struct acpiphp_func pointer to the handle field of the outer struct acpiphp_context. Hence, the handle field of struct acpiphp_func is redundant, so drop it and provide a helper function, func_to_handle(), allowing it users to get the ACPI handle for the given struct acpiphp_func pointer. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> |
|
|
Rafael J. Wysocki
|
bd4674dfc5 |
ACPI / hotplug / PCI: Embed function struct into struct acpiphp_context
Since there has to be a struct acpiphp_func object for every struct acpiphp_context created by register_slot(), the struct acpiphp_func one can be embedded into the struct acpiphp_context one, which allows some code simplifications to be made. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> |