- Removing of non-DYNAMIC_FTRACE from 32bit x86
- Removing of mcount support from x86
- Emulating a call from int3 on x86_64, fixes live kernel patching
- Consolidated Tracing Error logs file
Minor updates:
- Removal of klp_check_compiler_support()
- kdb ftrace dumping output changes
- Accessing and creating ftrace instances from inside the kernel
- Clean up of #define if macro
- Introduction of TRACE_EVENT_NOP() to disable trace events based on config
options
And other minor fixes and clean ups
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXNxMZxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qq4PAP44kP6VbwL8CHyI2A3xuJ6Hwxd+2Z2r
ip66RtzyJ+2iCgEA2QCuWUlEt2bLpF9a8IQ4N9tWenSeW2i7gunPb+tioQw=
=RVQo
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"The major changes in this tracing update includes:
- Removal of non-DYNAMIC_FTRACE from 32bit x86
- Removal of mcount support from x86
- Emulating a call from int3 on x86_64, fixes live kernel patching
- Consolidated Tracing Error logs file
Minor updates:
- Removal of klp_check_compiler_support()
- kdb ftrace dumping output changes
- Accessing and creating ftrace instances from inside the kernel
- Clean up of #define if macro
- Introduction of TRACE_EVENT_NOP() to disable trace events based on
config options
And other minor fixes and clean ups"
* tag 'trace-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (44 commits)
x86: Hide the int3_emulate_call/jmp functions from UML
livepatch: Remove klp_check_compiler_support()
ftrace/x86: Remove mcount support
ftrace/x86_32: Remove support for non DYNAMIC_FTRACE
tracing: Simplify "if" macro code
tracing: Fix documentation about disabling options using trace_options
tracing: Replace kzalloc with kcalloc
tracing: Fix partial reading of trace event's id file
tracing: Allow RCU to run between postponed startup tests
tracing: Fix white space issues in parse_pred() function
tracing: Eliminate const char[] auto variables
ring-buffer: Fix mispelling of Calculate
tracing: probeevent: Fix to make the type of $comm string
tracing: probeevent: Do not accumulate on ret variable
tracing: uprobes: Re-enable $comm support for uprobe events
ftrace/x86_64: Emulate call function while updating in breakpoint handler
x86_64: Allow breakpoints to emulate call instructions
x86_64: Add gap to int3 to allow for call emulation
tracing: kdb: Allow ftdump to skip all but the last few entries
tracing: Add trace_total_entries() / trace_total_entries_cpu()
...
No architecture terminates the stack trace with ULONG_MAX anymore. As the
code checks the number of entries stored anyway there is no point in
keeping all that ULONG_MAX magic around.
The histogram code zeroes the storage before saving the stack, so if the
trace is shorter than the maximum number of entries it can terminate the
print loop if a zero entry is detected.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Alexander Potapenko <glider@google.com>
Link: https://lkml.kernel.org/r/20190410103645.048761764@linutronix.de
As each instance has their own error_log file, it makes more sense that the
instances show the errors of their own instead of all error_logs having the
same data. Make it that the errors show up in the instance error_log file
that the error happens in. If no instance trace_array is available, then
NULL can be passed in which will create the error in the top level instance
(the one at the top of the tracefs directory).
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Have the trace_array that associates the trace instance of the histogram
passed around to functions so that error handling can display the error
message in the proper instance.
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Replace hist_err() and hist_err_event() with tracing_log_err() from
the new tracing error_log mechanism.
Also add a couple related helper functions and remove most of the old
hist_err()-related code.
With this change, users no longer read the hist files for hist trigger
error information, but instead look at tracing/error_log for the same
information.
Link: http://lkml.kernel.org/r/c98f77a97c9715d18b623eeb5741057b330d5ac0.1554072478.git.tom.zanussi@linux.intel.com
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
In preparation for making use of the new trace error log, save the
subsystem and event name associated with the last hist command - it
will be passed as the location param in the event_log_err() calls.
Link: http://lkml.kernel.org/r/eb0fd1362be8f39facb86c83eecf441b7a5876f8.1554072478.git.tom.zanussi@linux.intel.com
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Because there may be random garbage beyond a string's null terminator,
code that might use the entire comm array e.g. histogram keys, can
give unexpected results if that garbage is copied in too, so avoid
that possibility by using strncpy instead of memcpy.
Link: http://lkml.kernel.org/r/1eb9f096a8086c3c82c7fc087c900005143cec54.1551802084.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Because there may be random garbage beyond a string's null terminator,
it's not correct to copy the the complete character array for use as a
hist trigger key. This results in multiple histogram entries for the
'same' string key.
So, in the case of a string key, use strncpy instead of memcpy to
avoid copying in the extra bytes.
Before, using the gdbus entries in the following hist trigger as an
example:
# echo 'hist:key=comm' > /sys/kernel/debug/tracing/events/sched/sched_waking/trigger
# cat /sys/kernel/debug/tracing/events/sched/sched_waking/hist
...
{ comm: ImgDecoder #4 } hitcount: 203
{ comm: gmain } hitcount: 213
{ comm: gmain } hitcount: 216
{ comm: StreamTrans #73 } hitcount: 221
{ comm: mozStorage #3 } hitcount: 230
{ comm: gdbus } hitcount: 233
{ comm: StyleThread#5 } hitcount: 253
{ comm: gdbus } hitcount: 256
{ comm: gdbus } hitcount: 260
{ comm: StyleThread#4 } hitcount: 271
...
# cat /sys/kernel/debug/tracing/events/sched/sched_waking/hist | egrep gdbus | wc -l
51
After:
# cat /sys/kernel/debug/tracing/events/sched/sched_waking/hist | egrep gdbus | wc -l
1
Link: http://lkml.kernel.org/r/50c35ae1267d64eee975b8125e151e600071d4dc.1549309756.git.tom.zanussi@linux.intel.com
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 79e577cbce ("tracing: Support string type key properly")
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add a 'trace(synthetic_event_name, params)' alternative to
synthetic_event_name(params).
Currently, the syntax used for generating synthetic events is to
invoke synthetic_event_name(params) i.e. use the synthetic event name
as a function call.
Users requested a new form that more explicitly shows that the
synthetic event is in effect being traced. In this version, a new
'trace()' keyword is used, and the synthetic event name is passed in
as the first argument.
In addition, for the sake of consistency with other actions, change
the documention to emphasize the trace() form over the function-call
form, which remains documented as equivalent.
Link: http://lkml.kernel.org/r/d082773e50232a001480cf837679a1e01c1a2eb7.1550100284.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add support for hist:handlerXXX($var).snapshot(), which will take a
snapshot of the current trace buffer whenever handlerXXX is hit.
As a first user, this also adds snapshot() action support for the
onmax() handler i.e. hist:onmax($var).snapshot().
Also, the hist trigger key printing is moved into a separate function
so the snapshot() action can print a histogram key outside the
histogram display - add and use hist_trigger_print_key() for that
purpose.
Link: http://lkml.kernel.org/r/2f1a952c0dcd8aca8702ce81269581a692396d45.1550100284.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The action refactor code allowed actions and handlers to be separated,
but the existing onmax handler and save action code is still not
flexible enough to handle arbitrary coupling. This change generalizes
them and in the process makes additional handlers and actions easier
to implement.
The onmax action can be broken up and thought of as two separate
components - a variable to be tracked (the parameter given to the
onmax($var_to_track) function) and an invisible variable created to
save the ongoing result of doing something with that variable, such as
saving the max value of that variable so far seen.
Separating it out like this and renaming it appropriately allows us to
use the same code for similar tracking functions such as
onchange($var_to_track), which would just track the last value seen
rather than the max seen so far, which is useful in some situations.
Additionally, because different handlers and actions may want to save
and access data differently e.g. save and retrieve tracking values as
local variables vs something more global, save_val() and get_val()
interface functions are introduced and max-specific implementations
are used instead.
The same goes for the code that checks whether a maximum has been hit
- a generic check_val() interface and max-checking implementation is
used instead, which allows future patches to make use of he same code
using their own implemetations of similar functionality.
Link: http://lkml.kernel.org/r/980ea73dd8e3f36db3d646f99652f8fed42b77d4.1550100284.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Currently, the onmatch action data binds the onmatch action to data
related to synthetic event generation. Since we want to allow the
onmatch handler to potentially invoke a different action, and because
we expect other handlers to generate synthetic events, we need to
separate the data related to these two functions.
Also rename the onmatch data to something more descriptive, and create
and use common action data destroy function.
Link: http://lkml.kernel.org/r/b9abbf9aae69fe3920cdc8ddbcaad544dd258d78.1550100284.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The hist trigger action code currently implements two essentially
hard-coded pairs of 'actions' - onmax(), which tracks a variable and
saves some event fields when a max is hit, and onmatch(), which is
hard-coded to generate a synthetic event.
These hardcoded pairs (track max/save fields and detect match/generate
synthetic event) should really be decoupled into separate components
that can then be arbitrarily combined. The first component of each
pair (track max/detect match) is called a 'handler' in the new code,
while the second component (save fields/generate synthetic event) is
called an 'action' in this scheme.
This change refactors the action code to reflect this split by adding
two handlers, HANDLER_ONMATCH and HANDLER_ONMAX, along with two
actions, ACTION_SAVE and ACTION_TRACE.
The new code combines them to produce the existing ONMATCH/TRACE and
ONMAX/SAVE functionality, but doesn't implement the other combinations
now possible. Future patches will expand these to further useful
cases, such as ONMAX/TRACE, as well as add additional handlers and
actions such as ONCHANGE and SNAPSHOT.
Also, add abbreviated documentation for handlers and actions to
README.
Link: http://lkml.kernel.org/r/98bfdd48c1b4ff29fc5766442f99f5bc3c34b76b.1550100284.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
As str_has_prefix() returns the length on match, we can use that for the
updating of the string pointer instead of recalculating the prefix size.
Cc: Tom Zanussi <zanussi@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
There are several instances of strncmp(str, "const", 123), where 123 is the
strlen of the const string to check if "const" is the prefix of str. But
this can be error prone. Use str_has_prefix() instead.
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The tracing histogram code contains a lot of instances of the construct:
strncmp(str, "const", sizeof("const") - 1)
This can be prone to bugs due to typos or bad cut and paste. Use the
str_has_prefix() helper macro instead that removes the need for having two
copies of the constant string.
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
All var_refs are now handled uniformly and there's no reason to treat
the synth_refs in a special way now, so remove them and associated
functions.
Link: http://lkml.kernel.org/r/b4d3470526b8f0426dcec125399dad9ad9b8589d.1545161087.git.tom.zanussi@linux.intel.com
Acked-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Since every var ref for a trigger has an entry in the var_ref[] array,
use that to destroy the var_refs, instead of piecemeal via the field
expressions.
This allows us to avoid having to keep and treat differently separate
lists for the action-related references, which future patches will
remove.
Link: http://lkml.kernel.org/r/fad1a164f0e257c158e70d6eadbf6c586e04b2a2.1545161087.git.tom.zanussi@linux.intel.com
Acked-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Have create_var_ref() manage the hist trigger's var_ref list, rather
than having similar code doing it in multiple places. This cleans up
the code and makes sure var_refs are always accounted properly.
Also, document the var_ref-related functions to make what their
purpose clearer.
Link: http://lkml.kernel.org/r/05ddae93ff514e66fc03897d6665231892939913.1545161087.git.tom.zanussi@linux.intel.com
Acked-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Since all the variable reference hist_fields are collected into
hist_data->var_refs[] array, there's no need to go through all the
fields looking for them, or in separate arrays like synth_var_refs[],
which will be going away soon anyway.
This also allows us to get rid of some unnecessary code and functions
currently used for the same purpose.
Link: http://lkml.kernel.org/r/1545246556.4239.7.camel@gmail.com
Acked-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
There's no need to use strlen() for static strings when the length is
already known, so update trace_events_hist.c with sizeof() for those
cases.
Link: http://lkml.kernel.org/r/e3e754f2bd18e56eaa8baf79bee619316ebf4cfc.1545161087.git.tom.zanussi@linux.intel.com
Acked-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The trace_add/remove_event_call_nolock() functions were added to allow
the tace_add/remove_event_call() code be called when the event_mutex
lock was already taken. Now that all callers are done within the
event_mutex, there's no reason to have two different interfaces.
Remove the current wrapper trace_add/remove_event_call()s and rename the
_nolock versions back to the original names.
Link: http://lkml.kernel.org/r/154140866955.17322.2081425494660638846.stgit@devbox
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Rmove unneeded synth_event_mutex. This mutex protects the reference
count in synth_event, however, those operational points are already
protected by event_mutex.
1. In __create_synth_event() and create_or_delete_synth_event(),
those synth_event_mutex clearly obtained right after event_mutex.
2. event_hist_trigger_func() is trigger_hist_cmd.func() which is
called by trigger_process_regex(), which is a part of
event_trigger_regex_write() and this function takes event_mutex.
3. hist_unreg_all() is trigger_hist_cmd.unreg_all() which is called
by event_trigger_regex_open() and it takes event_mutex.
4. onmatch_destroy() and onmatch_create() have long call tree,
but both are finally invoked from event_trigger_regex_write()
and event_trace_del_tracer(), former takes event_mutex, and latter
ensures called under event_mutex locked.
Finally, I ensured there is no resource conflict. For safety,
I added lockdep_assert_held(&event_mutex) for each function.
Link: http://lkml.kernel.org/r/154140864134.17322.4796059721306031894.stgit@devbox
Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Use dyn_event framework for synthetic events. This shows
synthetic events on "tracing/dynamic_events" file in addition
to tracing/synthetic_events interface.
User can also define new events via tracing/dynamic_events
with "s:" prefix. So, the new syntax is below;
s:[synthetic/]EVENT_NAME TYPE ARG; [TYPE ARG;]...
To remove events via tracing/dynamic_events, you can use
"-:" prefix as same as other events.
Link: http://lkml.kernel.org/r/154140861301.17322.15454611233735614508.stgit@devbox
Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Since the event_mutex and synth_event_mutex ordering issue
is gone, we can skip existing event check when adding or
deleting events, and some redundant code in error path.
This changes release_all_synth_events() to abort the process
when it hits any error and returns the error code. It succeeds
only if it has no error.
Link: http://lkml.kernel.org/r/154140847194.17322.17960275728005067803.stgit@devbox
Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
synthetic event is using synth_event_mutex for protecting
synth_event_list, and event_trigger_write() path acquires
locks as below order.
event_trigger_write(event_mutex)
->trigger_process_regex(trigger_cmd_mutex)
->event_hist_trigger_func(synth_event_mutex)
On the other hand, synthetic event creation and deletion paths
call trace_add_event_call() and trace_remove_event_call()
which acquires event_mutex. In that case, if we keep the
synth_event_mutex locked while registering/unregistering synthetic
events, its dependency will be inversed.
To avoid this issue, current synthetic event is using a 2 phase
process to create/delete events. For example, it searches existing
events under synth_event_mutex to check for event-name conflicts, and
unlocks synth_event_mutex, then registers a new event under event_mutex
locked. Finally, it locks synth_event_mutex and tries to add the
new event to the list. But it can introduce complexity and a chance
for name conflicts.
To solve this simpler, this introduces trace_add_event_call_nolock()
and trace_remove_event_call_nolock() which don't acquire
event_mutex inside. synthetic event can lock event_mutex before
synth_event_mutex to solve the lock dependency issue simpler.
Link: http://lkml.kernel.org/r/154140844377.17322.13781091165954002713.stgit@devbox
Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Return -ENOENT error if there is no target synthetic event.
This notices an operation failure to user as below;
# echo 'wakeup_latency u64 lat; pid_t pid;' > synthetic_events
# echo '!wakeup' >> synthetic_events
sh: write error: No such file or directory
Link: http://lkml.kernel.org/r/154013449986.25576.9487131386597290172.stgit@devbox
Acked-by: Tom Zanussi <zanussi@linux.intel.com>
Tested-by: Tom Zanussi <zanussi@linux.intel.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Rajvi Jingar <rajvi.jingar@intel.com>
Cc: stable@vger.kernel.org
Fixes: 4b147936fa ('tracing: Add support for 'synthetic' events')
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fix synthetic event to allow independent semicolon at end.
The synthetic_events interface accepts a semicolon after the
last word if there is no space.
# echo "myevent u64 var;" >> synthetic_events
But if there is a space, it returns an error.
# echo "myevent u64 var ;" > synthetic_events
sh: write error: Invalid argument
This behavior is difficult for users to understand. Let's
allow the last independent semicolon too.
Link: http://lkml.kernel.org/r/153986835420.18251.2191216690677025744.stgit@devbox
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Cc: stable@vger.kernel.org
Fixes: commit 4b147936fa ("tracing: Add support for 'synthetic' events")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fix synthetic event to accept unsigned modifier for its field type
correctly.
Currently, synthetic_events interface returns error for "unsigned"
modifiers as below;
# echo "myevent unsigned long var" >> synthetic_events
sh: write error: Invalid argument
This is because argv_split() breaks "unsigned long" into "unsigned"
and "long", but parse_synth_field() doesn't expected it.
With this fix, synthetic_events can handle the "unsigned long"
correctly like as below;
# echo "myevent unsigned long var" >> synthetic_events
# cat synthetic_events
myevent unsigned long var
Link: http://lkml.kernel.org/r/153986832571.18251.8448135724590496531.stgit@devbox
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Cc: stable@vger.kernel.org
Fixes: commit 4b147936fa ("tracing: Add support for 'synthetic' events")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Now that some trace events can be protected by srcu_read_lock(tracepoint_srcu),
we need to make sure all locations that depend on this are also protected.
There were many places that did a synchronize_sched() thinking that it was
enough to protect againts access to trace events. This use to be the case,
but now that we use SRCU for _rcuidle() trace events, they may not be
protected by synchronize_sched(), as they may be called in paths that RCU is
not watching for preempt disable.
Fixes: e6753f23d9 ("tracepoint: Make rcuidle tracepoint callers use SRCU")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
'err' is used as a NUL-terminated string, but using strncpy() with the length
equal to the buffer size may result in lack of the termination:
kernel/trace/trace_events_hist.c: In function 'hist_err_event':
kernel/trace/trace_events_hist.c:396:3: error: 'strncpy' specified bound 256 equals destination size [-Werror=stringop-truncation]
strncpy(err, var, MAX_FILTER_STR_VAL);
This changes it to use the safer strscpy() instead.
Link: http://lkml.kernel.org/r/20180328140920.2842153-1-arnd@arndb.de
Cc: stable@vger.kernel.org
Fixes: f404da6e1d ("tracing: Add 'last error' error facility for hist triggers")
Acked-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Now that trace_marker can have triggers, including a histogram triggers, the
onmatch() and onmax() access the trace event. To do so, the search routine
to find the event file needs to use the raw __find_event_file() that does
not filter out ftrace events.
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
If the user specifies an invalid field modifier for a hist trigger,
the current code correctly flags that as an error, but doesn't tell
the user what happened.
Fix this by invoking hist_err() with an appropriate message when
invalid modifiers are specified.
Before:
# echo 'hist:keys=pid:ts0=common_timestamp.junkusecs' >> /sys/kernel/debug/tracing/events/sched/sched_wakeup/trigger
-su: echo: write error: Invalid argument
# cat /sys/kernel/debug/tracing/events/sched/sched_wakeup/hist
After:
# echo 'hist:keys=pid:ts0=common_timestamp.junkusecs' >> /sys/kernel/debug/tracing/events/sched/sched_wakeup/trigger
-su: echo: write error: Invalid argument
# cat /sys/kernel/debug/tracing/events/sched/sched_wakeup/hist
ERROR: Invalid field modifier: junkusecs
Last command: keys=pid:ts0=common_timestamp.junkusecs
Link: http://lkml.kernel.org/r/b043c59fa79acd06a5f14a1d44dee9e5a3cd1248.1524790601.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
If the user specifies a nonexistent field for a hist trigger, the
current code correctly flags that as an error, but doesn't tell the
user what happened.
Fix this by invoking hist_err() with an appropriate message when
nonexistent fields are specified.
Before:
# echo 'hist:keys=pid:ts0=common_timestamp.usecs' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger
-su: echo: write error: Invalid argument
# cat /sys/kernel/debug/tracing/events/sched/sched_switch/hist
After:
# echo 'hist:keys=pid:ts0=common_timestamp.usecs' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger
-su: echo: write error: Invalid argument
# cat /sys/kernel/debug/tracing/events/sched/sched_switch/hist
ERROR: Couldn't find field: pid
Last command: keys=pid:ts0=common_timestamp.usecs
Link: http://lkml.kernel.org/r/fdc8746969d16906120f162b99dd71c741e0b62c.1524790601.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Reported-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The flag-printing code used when displaying hist triggers somehow got
dropped during refactoring of the inter-event patchset. This restores
it.
Below are a couple examples - in the first case, .usecs wasn't being
displayed properly for common_timestamps and the second illustrates
the same for other flags such as .execname.
Before:
# echo 'hist:key=common_pid.execname:val=count:sort=count' > /sys/kernel/debug/tracing/events/syscalls/sys_enter_read/trigger
# cat /sys/kernel/debug/tracing/events/syscalls/sys_enter_read/trigger
hist:keys=common_pid:vals=hitcount,count:sort=count:size=2048 [active]
# echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_wakeup/trigger
# cat /sys/kernel/debug/tracing/events/sched/sched_wakeup/trigger
hist:keys=pid:vals=hitcount:ts0=common_timestamp:sort=hitcount:size=2048:clock=global if comm=="cyclictest" [active]
After:
# echo 'hist:key=common_pid.execname:val=count:sort=count' > /sys/kernel/debug/tracing/events/syscalls/sys_enter_read/trigger
# cat /sys/kernel/debug/tracing/events/syscalls/sys_enter_read/trigger
hist:keys=common_pid.execname:vals=hitcount,count:sort=count:size=2048 [active]
# echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_wakeup/trigger
# cat /sys/kernel/debug/tracing/events/sched/sched_wakeup/trigger
hist:keys=pid:vals=hitcount:ts0=common_timestamp.usecs:sort=hitcount:size=2048:clock=global if comm=="cyclictest" [active]
Link: http://lkml.kernel.org/r/492bab42ff21806600af98a8ea901af10efbee0c.1524790601.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Smatch complains that idx can be used uninitialized when we check if
(idx < 0). It has to be the first iteration through the loop and the
HIST_FIELD_FL_STACKTRACE bit has to be clear and the HIST_FIELD_FL_VAR
bit has to be set to reach the bug.
Link: http://lkml.kernel.org/r/20180328114815.GC29050@mwanda
Fixes: 30350d65ac ("tracing: Add variable support to hist triggers")
Acked-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The strncpy() currently being used for variable string fields can
result in a lack of termination if the string length is equal to the
field size. Use the safer strscpy() instead, which will guarantee
termination.
Link: http://lkml.kernel.org/r/fb97c1e518fb358c12a4057d7445ba2c46956cd7.1522256721.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Actions also need to be considered when checking for matching triggers
- triggers differing only by action should be allowed, but currently
aren't because the matching check ignores the action and erroneously
returns -EEXIST.
Add and call an actions_match() function to address that.
Here's an example using onmatch() actions. The first -EEXIST shouldn't
occur because the onmatch() is different in the second wakeup_latency()
param. The second -EEXIST shouldn't occur because it's a different
action (in this case, it doesn't have an action, so shouldn't be seen
as being the same and therefore rejected).
In the after case, both are correctly accepted (and trying to add one of
them again returns -EEXIST as it should).
before:
# echo 'wakeup_latency u64 lat; pid_t pid' >> /sys/kernel/debug/tracing/synthetic_events
# echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_wakeup/trigger
# echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0 if next_comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger
# echo 'hist:keys=next_pid:onmatch(sched.sched_wakeup).wakeup_latency(sched.sched_switch.$wakeup_lat,next_pid) if next_comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger
# echo 'hist:keys=next_pid:onmatch(sched.sched_wakeup).wakeup_latency(sched.sched_switch.$wakeup_lat,prev_pid) if next_comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger
-su: echo: write error: File exists
# echo 'hist:keys=next_pid if next_comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger
-su: echo: write error: File exists
after:
# echo 'wakeup_latency u64 lat; pid_t pid' >> /sys/kernel/debug/tracing/synthetic_events
# echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_wakeup/trigger
# echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0 if next_comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger
# echo 'hist:keys=next_pid:onmatch(sched.sched_wakeup).wakeup_latency(sched.sched_switch.$wakeup_lat,next_pid) if next_comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger
# echo 'hist:keys=next_pid:onmatch(sched.sched_wakeup).wakeup_latency(sched.sched_switch.$wakeup_lat,prev_pid) if next_comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger
# echo 'hist:keys=next_pid if next_comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger
Link: http://lkml.kernel.org/r/a7fd668b87ec10736c8f016ac4279c8480d50c2b.1522256721.git.tom.zanussi@linux.intel.com
Tested-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Variable references should never have flags appended when displayed -
prevent that from happening.
Before:
# cat /sys/kernel/debug/tracing/events/sched/sched_switch/trigger
hist:keys=next_pid:vals=hitcount:wakeup_lat=common_timestamp.usecs-$ts0.usecs:...
After:
hist:keys=next_pid:vals=hitcount:wakeup_lat=common_timestamp.usecs-$ts0:...
Link: http://lkml.kernel.org/r/913318a5610ef6b24af2522575f671fa6ee19b6b.1522256721.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
When displaying hist triggers, variable references that have the
timestamp field flag set are erroneously displayed as common_timestamp
rather than the variable reference. Additionally, timestamp
expressions are displayed in the same way. Fix this by forcing the
timestamp flag handling to follow variable reference and expression
handling.
Before:
# cat /sys/kernel/debug/tracing/events/sched/sched_switch/trigger
hist:keys=next_pid:vals=hitcount:wakeup_lat=common_timestamp.usecs:...
After:
# cat /sys/kernel/debug/tracing/events/sched/sched_switch/trigger
hist:keys=next_pid:vals=hitcount:wakeup_lat=common_timestamp.usecs-$ts0.usecs:...
Link: http://lkml.kernel.org/r/92746b06be67499c2a6217bd55395b350ad18fad.1522256721.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
We forgot to set the error code on this path so we return ERR_PTR(0)
which is NULL. It results in a NULL dereference in the caller.
Link: http://lkml.kernel.org/r/20180323113735.GC28518@mwanda
Fixes: 100719dcef ("tracing: Add simple expression support to hist triggers")
Acked-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Synthetic events can be done within the recording of other events. Notify
the ring buffer via ring_buffer_nest_start() and ring_buffer_nest_end() that
this is intended and not to block it due to its recursion protection.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The default clock if timestamps are used in a histogram is "global".
If timestamps aren't used, the clock is irrelevant.
Use the "clock=" param only if you want to override the default
"global" clock for a histogram with timestamps.
Link: http://lkml.kernel.org/r/427bed1389c5d22aa40c3e0683e30cc3d151e260.1516069914.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Rajvi Jingar <rajvi.jingar@intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Linus Torvalds