Commit Graph

8 Commits

Author SHA1 Message Date
Juergen Gross 4b5ae0150f arm/xen: add support for vm_assist hypercall
Add support for the Xen HYPERVISOR_vm_assist hypercall.

Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-07-06 10:42:14 +01:00
Shannon Zhao be1aaf4e40 ARM64: XEN: Add a function to initialize Xen specific UEFI runtime services
When running on Xen hypervisor, runtime services are supported through
hypercall. Add a Xen specific function to initialize runtime services.

Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Tested-by: Julien Grall <julien.grall@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
2016-07-06 10:34:46 +01:00
Stefano Stabellini 72d39c691b xen/arm: introduce HYPERVISOR_platform_op on arm and arm64
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-12-21 14:40:56 +00:00
Ian Campbell 5e40704ed2 arm: xen: implement multicall hypercall support.
As part of this make the usual change to xen_ulong_t in place of unsigned long.
This change has no impact on x86.

The Linux definition of struct multicall_entry.result differs from the Xen
definition, I think for good reasons, and used a long rather than an unsigned
long. Therefore introduce a xen_long_t, which is a long on x86 architectures
and a signed 64-bit integer on ARM.

Use uint32_t nr_calls on x86 for consistency with the ARM definition.

Build tested on amd64 and i386 builds. Runtime tested on ARM.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2014-04-24 13:09:46 +01:00
Stefano Stabellini 83862ccfc0 xen/arm,arm64: enable SWIOTLB_XEN
Xen on arm and arm64 needs SWIOTLB_XEN: when running on Xen we need to
program the hardware with mfns rather than pfns for dma addresses.
Remove SWIOTLB_XEN dependency on X86 and PCI and make XEN select
SWIOTLB_XEN on arm and arm64.

At the moment always rely on swiotlb-xen, but when Xen starts supporting
hardware IOMMUs we'll be able to avoid it conditionally on the presence
of an IOMMU on the platform.

Implement xen_create_contiguous_region on arm and arm64: for the moment
we assume that dom0 has been mapped 1:1 (physical addresses == machine
addresses) therefore we don't need to call XENMEM_exchange. Simply
return the physical address as dma address.

Initialize the xen-swiotlb from xen_early_init (before the native
dma_ops are initialized), set xen_dma_ops to &xen_swiotlb_dma_ops.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>


Changes in v8:
- assume dom0 is mapped 1:1, no need to call XENMEM_exchange.

Changes in v7:
- call __set_phys_to_machine_multi from xen_create_contiguous_region and
xen_destroy_contiguous_region to update the P2M;
- don't call XENMEM_unpin, it has been removed;
- call XENMEM_exchange instead of XENMEM_exchange_and_pin;
- set nr_exchanged to 0 before calling the hypercall.

Changes in v6:
- introduce and export xen_dma_ops;
- call xen_mm_init from as arch_initcall.

Changes in v4:
- remove redefinition of DMA_ERROR_CODE;
- update the code to use XENMEM_exchange_and_pin and XENMEM_unpin;
- add a note about hardware IOMMU in the commit message.

Changes in v3:
- code style changes;
- warn on XENMEM_put_dma_buf failures.
2013-10-10 13:40:44 +00:00
Stefano Stabellini 4a19138c65 arm/xen,arm64/xen: introduce p2m
Introduce physical to machine and machine to physical tracking
mechanisms based on rbtrees for arm/xen and arm64/xen.

We need it because any guests on ARM are an autotranslate guests,
therefore a physical address is potentially different from a machine
address. When programming a device to do DMA, we need to be
extra-careful to use machine addresses rather than physical addresses to
program the device. Therefore we need to know the physical to machine
mappings.

For the moment we assume that dom0 starts with a 1:1 physical to machine
mapping, in other words physical addresses correspond to machine
addresses. However when mapping a foreign grant reference, obviously the
1:1 model doesn't work anymore. So at the very least we need to be able
to track grant mappings.

We need locking to protect accesses to the two trees.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>

Changes in v8:
- move pfn_to_mfn and mfn_to_pfn to page.h as static inline functions;
- no need to walk the tree if phys_to_mach.rb_node is NULL;
- correctly handle multipage p2m entries;
- substitute the spin_lock with a rwlock.
2013-10-17 16:22:27 +00:00
Stefano Stabellini 176455e9a9 xen/arm and xen/arm64: implement HYPERVISOR_tmem_op
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2013-07-04 11:41:12 +00:00
Stefano Stabellini aa42aa1389 arm64/xen: introduce CONFIG_XEN and hypercall.S on ARM64
Introduce CONFIG_XEN and the implementation of hypercall.S (that is
the only ARMv8 specific code in Xen support for ARM).

Compile enlighten.c and grant_table.c from arch/arm.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
2013-06-07 10:39:52 +00:00