Pull thermal management updates from Zhang Rui:
- Remove the 'module' Kconfig option for thermal subsystem framework
because the thermal framework are required to be ready as early as
possible to avoid overheat at boot time (Daniel Lezcano)
- Fix a bug that thermal framework pokes disabled thermal zones upon
resume (Wei Wang)
- A couple of cleanups and trivial fixes on int340x thermal drivers
(Srinivas Pandruvada, Zhang Rui, Sumeet Pawnikar)
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
drivers: thermal: processor_thermal: Downgrade error message
mlxsw: Remove obsolete dependency on THERMAL=m
hwmon/drivers/core: Simplify complex dependency
thermal/drivers/core: Fix typo in the option name
thermal/drivers/core: Remove depends on THERMAL in Kconfig
thermal/drivers/core: Remove module unload code
thermal/drivers/core: Remove the module Kconfig's option
thermal: core: skip update disabled thermal zones after suspend
thermal: make device_register's type argument const
thermal: intel: int340x: processor_thermal_device: simplify to get driver data
thermal/int3403_thermal: favor _TMP instead of PTYP
locking. Requires some list_bl interface improvements.
- Add ability for DM integrity to use a bitmap mode, that tracks regions
where data and metadata are out of sync, instead of using a journal.
- Improve DM thin provisioning target to not write metadata changes to
disk if the thin-pool and associated thin devices are merely
activated but not used. This avoids metadata corruption due to
concurrent activation of thin devices across different OS instances
(e.g. split brain scenarios, which ultimately would be avoided if
proper device filters were used -- but not having proper filtering has
proven a very common configuration mistake)
- Fix missing call to path selector type->end_io in DM multipath. This
fixes reported performance problems due to inaccurate path selector IO
accounting causing an imbalance of IO (e.g. avoiding issuing IO to
particular path due to it seemingly being heavily used).
- Fix bug in DM cache metadata's loading of its discard bitset that
could lead to all cache blocks being discarded if the very first cache
block was discarded (thankfully in practice the first cache block is
generally in use; be it FS superblock, partition table, disk label,
etc).
- Add testing-only DM dust target which simulates a device that has
failing sectors and/or read failures.
- Fix a DM init error path reference count hang that caused boot hangs
if user supplied malformed input on kernel commandline.
- Fix a couple issues with DM crypt target's logging being overly
verbose or lacking context.
- Various other small fixes to DM init, DM multipath, DM zoned, and DM
crypt.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAlzdcCgTHHNuaXR6ZXJA
cmVkaGF0LmNvbQAKCRDFI/EKLZ0DWsxZB/9idHl8LmwwL1JzBfi/XX7bWxwqDQLo
j1b3ycQ14AKVau4VCkmgDuRIfMDuU6PIAVvsMeVbF3aCE0fZ7zbEV1qHefbtJuCL
MMm//KbrhIT8oMKYUWtlOj7XI9MT6ErFzfActBZ6UF6r21m1N3bohhVGN7kvCnJm
wgmSlnz/m2GLKK8gQx+OisnAh0nlje3PIdIYPu7uWN6t0FF2XRz3UwWTuyw7lYhC
Rx2J+sOIL02CtadhHKLMCG8OutRXWP01cBSohUVJIMGihWfbe6aqvhG5afbqb4bG
UQrXl477ry5zyQ4fAU2JKZ+8qFvc1FoLLknKrZQu+uYPRokUPw/AwiL7
=mOH3
-----END PGP SIGNATURE-----
Merge tag 'for-5.2/dm-changes-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Improve DM snapshot target's scalability by using finer grained
locking. Requires some list_bl interface improvements.
- Add ability for DM integrity to use a bitmap mode, that tracks
regions where data and metadata are out of sync, instead of using a
journal.
- Improve DM thin provisioning target to not write metadata changes to
disk if the thin-pool and associated thin devices are merely
activated but not used. This avoids metadata corruption due to
concurrent activation of thin devices across different OS instances
(e.g. split brain scenarios, which ultimately would be avoided if
proper device filters were used -- but not having proper filtering
has proven a very common configuration mistake)
- Fix missing call to path selector type->end_io in DM multipath. This
fixes reported performance problems due to inaccurate path selector
IO accounting causing an imbalance of IO (e.g. avoiding issuing IO to
particular path due to it seemingly being heavily used).
- Fix bug in DM cache metadata's loading of its discard bitset that
could lead to all cache blocks being discarded if the very first
cache block was discarded (thankfully in practice the first cache
block is generally in use; be it FS superblock, partition table, disk
label, etc).
- Add testing-only DM dust target which simulates a device that has
failing sectors and/or read failures.
- Fix a DM init error path reference count hang that caused boot hangs
if user supplied malformed input on kernel commandline.
- Fix a couple issues with DM crypt target's logging being overly
verbose or lacking context.
- Various other small fixes to DM init, DM multipath, DM zoned, and DM
crypt.
* tag 'for-5.2/dm-changes-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (42 commits)
dm: fix a couple brace coding style issues
dm crypt: print device name in integrity error message
dm crypt: move detailed message into debug level
dm ioctl: fix hang in early create error condition
dm integrity: whitespace, coding style and dead code cleanup
dm integrity: implement synchronous mode for reboot handling
dm integrity: handle machine reboot in bitmap mode
dm integrity: add a bitmap mode
dm integrity: introduce a function add_new_range_and_wait()
dm integrity: allow large ranges to be described
dm ingerity: pass size to dm_integrity_alloc_page_list()
dm integrity: introduce rw_journal_sectors()
dm integrity: update documentation
dm integrity: don't report unused options
dm integrity: don't check null pointer before kvfree and vfree
dm integrity: correctly calculate the size of metadata area
dm dust: Make dm_dust_init and dm_dust_exit static
dm dust: remove redundant unsigned comparison to less than zero
dm mpath: always free attached_handler_name in parse_path()
dm init: fix max devices/targets checks
...
It turned out that DEBUG_SLAB_LEAK is still broken even after recent
recue efforts that when there is a large number of objects like
kmemleak_object which is normal on a debug kernel,
# grep kmemleak /proc/slabinfo
kmemleak_object 2243606 3436210 ...
reading /proc/slab_allocators could easily loop forever while processing
the kmemleak_object cache and any additional freeing or allocating
objects will trigger a reprocessing. To make a situation worse,
soft-lockups could easily happen in this sitatuion which will call
printk() to allocate more kmemleak objects to guarantee an infinite
loop.
Also, since it seems no one had noticed when it was totally broken
more than 2-year ago - see the commit fcf88917dd ("slab: fix a crash
by reading /proc/slab_allocators"), probably nobody cares about it
anymore due to the decline of the SLAB. Just remove it entirely.
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We've introduced power management logics for the Spreadtrum serial
controller by commit 062ec2774c8a ("serial: sprd: Add power management
for the Spreadtrum serial controller"), thus add related clock properties
to support this feature.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Fix afs_do_lookup() such that when it does an inline bulk status fetch op,
it will update inodes that are already extant (something that afs_iget()
doesn't do) and to cache permits for each inode created (thereby avoiding a
follow up FS.FetchStatus call to determine this).
Extant inodes need looking up in advance so that their cb_break counters
before and after the operation can be compared. To this end, the inode
pointers are cached so that they don't need looking up again after the op.
Fixes: 5cf9dd55a0 ("afs: Prospectively look up extra files when doing a single lookup")
Signed-off-by: David Howells <dhowells@redhat.com>
Pass the server and volume break counts from before the status fetch
operation that queried the attributes of a file into afs_iget5_set() so
that the new vnode's break counters can be initialised appropriately.
This allows detection of a volume or server break that happened whilst we
were fetching the status or setting up the vnode.
Fixes: c435ee3455 ("afs: Overhaul the callback handling")
Signed-off-by: David Howells <dhowells@redhat.com>
Make use of the status update for the target file that the YFS.RemoveFile2
RPC op returns to correctly update the vnode as to whether the file was
actually deleted or just had nlink reduced.
Fixes: 30062bd13e ("afs: Implement YFS support in the fs client")
Signed-off-by: David Howells <dhowells@redhat.com>
Fix afs_validate() to clear AFS_VNODE_CB_PROMISED on a vnode if we detect
any condition that causes the callback promise to be broken implicitly,
including server break (cb_s_break), volume break (cb_v_break) or callback
expiry.
Fixes: ae3b7361dc ("afs: Fix validation/callback interaction")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Use RCU-based freeing for afs_cb_interest struct objects and use RCU on
vnode->cb_interest. Use that change to allow afs_check_validity() to use
read_seqbegin_or_lock() instead of read_seqlock_excl().
This also requires the caller of afs_check_validity() to hold the RCU read
lock across the call.
Signed-off-by: David Howells <dhowells@redhat.com>
Split afs_validate() so that the part that decides if the vnode is still
valid can be used under LOOKUP_RCU conditions from afs_d_revalidate().
Signed-off-by: David Howells <dhowells@redhat.com>
Don't save callback version and type fields as the version is about the
format of the callback information and the type is relative to the
particular RPC call.
Signed-off-by: David Howells <dhowells@redhat.com>
Convert the vendor prefix registry to a schema. This will enable checking
that new vendor prefixes are added (in addition to the less than perfect
checkpatch.pl check) and will also check against adding other prefixes
which are not vendors.
Converted vendor-prefixes.txt using the following sed script:
sed -e 's/\([a-zA-Z0-9\-]*\)[[:space:]]*\([a-zA-Z0-9].*\)/ "^\1,\.\*\":\n description: \2/'
Signed-off-by: Rob Herring <robh@kernel.org>
-----BEGIN PGP SIGNATURE-----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=M94t
-----END PGP SIGNATURE-----
Merge tag 'media/v5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
"Some fixes for some platform drivers (rockchip, atmel, omap, daVinci,
tegra-cec, coda and rcar).
Also includes a fix on one of the V4L2 uAPI doc, explaining a border
case"
* tag 'media/v5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: rockchip/vpu: Fix/re-order probe-error/remove path
media: rockchip/vpu: Initialize mdev->bus_info
media: rockchip/vpu: Get vdev from the file arg in vidioc_querycap()
media: rockchip/vpu: Add missing dont_use_autosuspend() calls
media: rockchip/vpu: Do not request id 0 for our video device
media: tegra-cec: fix cec_notifier_parse_hdmi_phandle return check
media: davinci/vpbe: array underflow in vpbe_enum_outputs()
media: field-order.rst: clarify FIELD_ANY and FIELD_NONE
media: staging/imx: add media device to capture register
media: rcar-csi2: Propagate the FLD signal for NTSC and PAL
media: rcar-csi2: restart CSI-2 link if error is detected
media: omap_vout: potential buffer overflow in vidioc_dqbuf()
media: coda: fix unset field and fail on invalid field in buf_prepare
media: atmel: atmel-isc: fix asd memory allocation
media: atmel: atmel-isc: fix INIT_WORK misplacement
media: atmel: atmel-isc: limit incoming pixels per frame
* Correct edac_mc_find()'s return value on error (Robert Richter)
-----BEGIN PGP SIGNATURE-----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=yjXI
-----END PGP SIGNATURE-----
Merge tag 'edac_fixes_for_5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp
Pull EDAC fixes from Borislav Petkov:
- Do not build mpc85_edac as a module (Michael Ellerman)
- Correct edac_mc_find()'s return value on error (Robert Richter)
* tag 'edac_fixes_for_5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
EDAC/mc: Fix edac_mc_find() in case no device is found
EDAC/mpc85xx: Prevent building as a module
- a fix for an error path use after free (YueHaibing)
-----BEGIN PGP SIGNATURE-----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=lNOc
-----END PGP SIGNATURE-----
Merge tag 'configfs-for-5.2' of git://git.infradead.org/users/hch/configfs
Pull configfs update from Christoph Hellwig:
- a fix for an error path use after free (YueHaibing)
* tag 'configfs-for-5.2' of git://git.infradead.org/users/hch/configfs:
configfs: fix possible use-after-free in configfs_register_group
Christoph Hellwig writes:
This is a series doing two somewhat interwinded things. It improves
the asm-generic nommu uaccess helper to optionally be entirely generic
and not require any arch helpers for the actual uaccess. For the
generic uaccess.h to actually be generically useful I also had to kill
off the mess we made of <asm/segment.h>, which really shouldn't exist
on most architectures.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=X2CH
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-nommu' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull nommu generic uaccess updates from Arnd Bergmann:
"asm-generic: kill <asm/segment.h> and improve nommu generic uaccess helpers
Christoph Hellwig writes:
This is a series doing two somewhat interwinded things. It improves
the asm-generic nommu uaccess helper to optionally be entirely
generic and not require any arch helpers for the actual uaccess.
For the generic uaccess.h to actually be generically useful I also
had to kill off the mess we made of <asm/segment.h>, which really
shouldn't exist on most architectures"
* tag 'asm-generic-nommu' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
asm-generic: optimize generic uaccess for 8-byte loads and stores
asm-generic: provide entirely generic nommu uaccess
arch: mostly remove <asm/segment.h>
asm-generic: don't include <asm/segment.h> from <asm/uaccess.h>
Pull x86 fixes from Ingo Molnar:
"Misc fixes and updates:
- a handful of MDS documentation/comment updates
- a cleanup related to hweight interfaces
- a SEV guest fix for large pages
- a kprobes LTO fix
- and a final cleanup commit for vDSO HPET support removal"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/speculation/mds: Improve CPU buffer clear documentation
x86/speculation/mds: Revert CPU buffer clear on double fault exit
x86/kconfig: Disable CONFIG_GENERIC_HWEIGHT and remove __HAVE_ARCH_SW_HWEIGHT
x86/mm: Do not use set_{pud, pmd}_safe() when splitting a large page
x86/kprobes: Make trampoline_handler() global and visible
x86/vdso: Remove hpet_page from vDSO
Pull time fixes from Ingo Molnar:
"A TIA adjtimex interface extension, and a POSIX compliance ABI fix for
timespec64 users"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
ntp: Allow TAI-UTC offset to be set to zero
y2038: Make CONFIG_64BIT_TIME unconditional
- ov2640 driver as module
- selecting HAVE_FB_ATMEL for SAMA5 SoCs is useless
-----BEGIN PGP SIGNATURE-----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=ioJR
-----END PGP SIGNATURE-----
Merge tag 'at91-5.2-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/late
AT91 defconfig for 5.2
- ov2640 driver as module
- selecting HAVE_FB_ATMEL for SAMA5 SoCs is useless
* tag 'at91-5.2-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: at91: sama5: make ov2640 as a module
ARM: at91: remove HAVE_FB_ATMEL for sama5 SoC as they use DRM
Signed-off-by: Olof Johansson <olof@lixom.net>
Pull perf fixes from Ingo Molnar:
"An x86 PMU constraint fix, an interface fix, and a Sparse fix"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Allow PEBS multi-entry in watermark mode
perf/x86/intel: Fix INTEL_FLAGS_EVENT_CONSTRAINT* masking
perf/x86/amd/iommu: Make the 'amd_iommu_attr_groups' symbol static
This contains one patch to disable the recently added XUSB support on
Jetson TX2 which is reported to cause boot and CPU hotplug failures in
some cases and doesn't allow the core power rail to be switched off.
Furthermore there are some changes to enable IOMMU support on more
devices. This is needed in order to prevent these devices from breaking
with the policy change in the ARM SMMU driver to break insecure devices
that is currently headed for v5.2.
-----BEGIN PGP SIGNATURE-----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=a/kH
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.2-arm64-dt-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/late
arm64: tegra: Device tree fixes for v5.2-rc1
This contains one patch to disable the recently added XUSB support on
Jetson TX2 which is reported to cause boot and CPU hotplug failures in
some cases and doesn't allow the core power rail to be switched off.
Furthermore there are some changes to enable IOMMU support on more
devices. This is needed in order to prevent these devices from breaking
with the policy change in the ARM SMMU driver to break insecure devices
that is currently headed for v5.2.
* tag 'tegra-for-5.2-arm64-dt-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Disable XUSB support on Jetson TX2
arm64: tegra: Enable SMMU translation for PCI on Tegra186
arm64: tegra: Fix insecure SMMU users for Tegra186
Signed-off-by: Olof Johansson <olof@lixom.net>
This enables the ARM_GIC_PM driver by default for Tegra in order to
increase build coverage.
-----BEGIN PGP SIGNATURE-----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=PgVG
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.2-arm64-soc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/late
arm64: tegra: Core fixes for v5.2-rc1
This enables the ARM_GIC_PM driver by default for Tegra in order to
increase build coverage.
* tag 'tegra-for-5.2-arm64-soc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Select ARM_GIC_PM
Signed-off-by: Olof Johansson <olof@lixom.net>
This contains a single fix for a potential PM-related build issue.
-----BEGIN PGP SIGNATURE-----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=Echw
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.2-bus-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/late
bus/tegra: Fixes for v5.2-rc1
This contains a single fix for a potential PM-related build issue.
* tag 'tegra-for-5.2-bus-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
amba: tegra-ahb: Mark PM functions as __maybe_unused
Signed-off-by: Olof Johansson <olof@lixom.net>
Pull locking fix from Ingo Molnar:
"A single rwsem fix"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rwsem: Prevent decrement of reader count before increment
A few months ago, I submitted a trivial arm64 defconfig update.
get_maintainer.pl now outputs my address for every defconfig tweak.
Add me to .get_maintainer.ignore to opt out of these notifications.
Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
Signed-off-by: Olof Johansson <olof@lixom.net>
arm32 socfpga_defconfig updates for v5.2
- Enable LTC2497 driver
- Enable support for large block devices
* tag 'socfpga_arm32_defconfig_for_v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
ARM: socfpga_defconfig: enable LTC2497
ARM: socfpga_defconfig: enable support for large block devices
Signed-off-by: Olof Johansson <olof@lixom.net>
NXP/FSL soc driver fixes for v5.1
QE drivers
- Fix an error path in qe_pin_request()
* tag 'soc-fsl-fix-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux:
soc/fsl/qe: Fix an error code in qe_pin_request()
Signed-off-by: Olof Johansson <olof@lixom.net>
mvebu arm for 5.2 (part 1)
- remove improper error message on kirkwood
- a couple a clean-up patch generated from automatic tools
- clean-up in assembly code allowing using LLVM
* tag 'mvebu-arm-5.2-1' of git://git.infradead.org/linux-mvebu:
ARM: mvebu: drop return from void function
ARM: mvebu: prefix coprocessor operand with p
ARM: mvebu: drop unnecessary label
ARM: mvebu: fix a leaked reference by adding missing of_node_put
ARM: mvebu: kirkwood: remove error message when retrieving mac address
Signed-off-by: Olof Johansson <olof@lixom.net>
Two regression fixes for omaps
Two one-liners to fix board-ams-delta booting regression and
logicpd-som-lv MMC card detect to use GPIO_ACTIVE_LOW instead of
IRQ_TYPE_LEVEL_LOW. Note that the board-ams-delta regression has
been in there already since v5.0, so if necessary these can wait
for the merge window.
* tag 'omap-for-v5.1/fixes-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: logicpd-som-lv: Fix MMC1 card detect
ARM: OMAP1: ams-delta: fix early boot crash when LED support is disabled
Signed-off-by: Olof Johansson <olof@lixom.net>
Alex Xu reported a regression in strace, caused by the introduction of
the cgroup v2 freezer. The regression can be reproduced by stracing
the following simple program:
#include <unistd.h>
int main() {
write(1, "a", 1);
return 0;
}
An attempt to run strace ./a.out leads to the infinite loop:
[ pre-main omitted ]
write(1, "a", 1) = ? ERESTARTSYS (To be restarted if SA_RESTART is set)
write(1, "a", 1) = ? ERESTARTSYS (To be restarted if SA_RESTART is set)
write(1, "a", 1) = ? ERESTARTSYS (To be restarted if SA_RESTART is set)
write(1, "a", 1) = ? ERESTARTSYS (To be restarted if SA_RESTART is set)
write(1, "a", 1) = ? ERESTARTSYS (To be restarted if SA_RESTART is set)
write(1, "a", 1) = ? ERESTARTSYS (To be restarted if SA_RESTART is set)
[ repeats forever ]
The problem occurs because the traced task leaves ptrace_stop()
(and the signal handling loop) with the frozen bit set. So let's
call cgroup_leave_frozen(true) unconditionally after sleeping
in ptrace_stop().
With this patch applied, strace works as expected:
[ pre-main omitted ]
write(1, "a", 1) = 1
exit_group(0) = ?
+++ exited with 0 +++
Reported-by: Alex Xu <alex_y_xu@yahoo.ca>
Fixes: 76f969e894 ("cgroup: cgroup v2 freezer")
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Pull core fixes from Ingo Molnar:
"A handful of objtool updates, plus a documentation addition for
__ab_c_size()"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix whitelist documentation typo
objtool: Fix function fallthrough detection
objtool: Don't use ignore flag for fake jumps
overflow.h: Add comment documenting __ab_c_size()
With this patch, we can use the 'percore' event qualifier in perf-stat.
root@skl:/tmp# perf stat -e cpu/event=0,umask=0x3,percore=1/,cpu/event=0,umask=0x3/ -a -A -I1000
1.000773050 S0-C0 98,352,832 cpu/event=0,umask=0x3,percore=1/ (50.01%)
1.000773050 S0-C1 103,763,057 cpu/event=0,umask=0x3,percore=1/ (50.02%)
1.000773050 S0-C2 196,776,995 cpu/event=0,umask=0x3,percore=1/ (50.02%)
1.000773050 S0-C3 176,493,779 cpu/event=0,umask=0x3,percore=1/ (50.02%)
1.000773050 CPU0 47,699,641 cpu/event=0,umask=0x3/ (50.02%)
1.000773050 CPU1 49,052,451 cpu/event=0,umask=0x3/ (49.98%)
1.000773050 CPU2 102,771,422 cpu/event=0,umask=0x3/ (49.98%)
1.000773050 CPU3 100,784,662 cpu/event=0,umask=0x3/ (49.98%)
1.000773050 CPU4 43,171,342 cpu/event=0,umask=0x3/ (49.98%)
1.000773050 CPU5 54,152,158 cpu/event=0,umask=0x3/ (49.98%)
1.000773050 CPU6 93,618,410 cpu/event=0,umask=0x3/ (49.98%)
1.000773050 CPU7 74,477,589 cpu/event=0,umask=0x3/ (49.99%)
In this example, we count the event 'ref-cycles' per-core and per-CPU in
one perf stat command-line. From the output, we can see:
S0-C0 = CPU0 + CPU4
S0-C1 = CPU1 + CPU5
S0-C2 = CPU2 + CPU6
S0-C3 = CPU3 + CPU7
So the result is expected (tiny difference is ignored).
Note that, the 'percore' event qualifier needs to use with option '-A'.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1555077590-27664-4-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the aggregate counts printing to a new function
print_counter_aggrdata, which will be used in following patches.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1555077590-27664-3-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a 'percore' event qualifier, like cpu/event=0,umask=0x3,percore=1/,
that sums up the event counts for both hardware threads in a core.
We can already do this with --per-core, but it's often useful to do
this together with other metrics that are collected per hardware thread.
So we need to support this per-core counting on a event level.
This can be implemented in only the user tool, no kernel support needed.
v4:
---
1. Add Arnaldo's patch which updates the documentation for
this new qualifier.
2. Rebase to latest perf/core branch
v3:
---
Simplify the code according to Jiri's comments.
Before:
"return term->val.percore ? true : false;"
Now:
"return term->val.percore;"
v2:
---
Change the qualifier name from 'coresum' to 'percore' according to
comments from Jiri and Andi.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1555077590-27664-2-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'perf report' displays recorded data on the screen and emits warnings
and debug messages in the status line (last one on screen).
perf also supports the possibility to write all debug messages to stderr
(instead of writing them to the status line).
This is achieved with the following command:
# ./perf --debug stderr=1 report -vvvvv -i ~/fast.data 2>/tmp/2
# ll /tmp/2
-rw-rw-r-- 1 tmricht tmricht 5420835 May 7 13:46 /tmp/2
#
The usage of variable stderr=1 is not documented, so add it to the perf
man page.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20190513080220.91966-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The sample timestamp is updated to ensure that the timestamp represents
the time of the sample and not a branch that the decoder is still
walking towards. The sample timestamp is updated when the decoder
returns, but the decoder does not return for non-taken branches. Update
the sample timestamp then also.
Note that commit 3f04d98e97 ("perf intel-pt: Improve sample
timestamp") was also a stable fix and appears, for example, in v4.4
stable tree as commit a4ebb58fd124 ("perf intel-pt: Improve sample
timestamp").
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v4.4+
Fixes: 3f04d98e97 ("perf intel-pt: Improve sample timestamp")
Link: http://lkml.kernel.org/r/20190510124143.27054-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The decoder uses its current timestamp in samples. Usually that is a
timestamp that has already passed, but in some cases it is a timestamp
for a branch that the decoder is walking towards, and consequently
hasn't reached.
The intel_pt_sample_time() function decides which is which, but was not
handling TNT packets exactly correctly.
In the case of TNT, the timestamp applies to the first branch, so the
decoder must first walk to that branch.
That means intel_pt_sample_time() should return true for TNT, and this
patch makes that change. However, if the first branch is a non-taken
branch (i.e. a 'N'), then intel_pt_sample_time() needs to return false
for subsequent taken branches in the same TNT packet.
To handle that, introduce a new state INTEL_PT_STATE_TNT_CONT to
distinguish the cases.
Note that commit 3f04d98e97 ("perf intel-pt: Improve sample
timestamp") was also a stable fix and appears, for example, in v4.4
stable tree as commit a4ebb58fd124 ("perf intel-pt: Improve sample
timestamp").
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v4.4+
Fixes: 3f04d98e97 ("perf intel-pt: Improve sample timestamp")
Link: http://lkml.kernel.org/r/20190510124143.27054-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The timestamp used to determine if an instruction sample is made, is an
estimate based on the number of instructions since the last known
timestamp. A consequence is that it might go backwards, which results in
extra samples. Change it so that a sample is only made when the
timestamp goes forwards.
Note this does not affect a sampling period of 0 or sampling periods
specified as a count of instructions.
Example:
Before:
$ perf script --itrace=i10us
ls 13812 [003] 2167315.222583: 3270 instructions:u: 7fac71e2e494 __GI___tunables_init+0xf4 (/lib/x86_64-linux-gnu/ld-2.28.so)
ls 13812 [003] 2167315.222667: 30902 instructions:u: 7fac71e2da0f _dl_cache_libcmp+0x2f (/lib/x86_64-linux-gnu/ld-2.28.so)
ls 13812 [003] 2167315.222667: 10 instructions:u: 7fac71e2d9ff _dl_cache_libcmp+0x1f (/lib/x86_64-linux-gnu/ld-2.28.so)
ls 13812 [003] 2167315.222667: 8 instructions:u: 7fac71e2d9ea _dl_cache_libcmp+0xa (/lib/x86_64-linux-gnu/ld-2.28.so)
ls 13812 [003] 2167315.222667: 14 instructions:u: 7fac71e2d9ea _dl_cache_libcmp+0xa (/lib/x86_64-linux-gnu/ld-2.28.so)
ls 13812 [003] 2167315.222667: 6 instructions:u: 7fac71e2d9ff _dl_cache_libcmp+0x1f (/lib/x86_64-linux-gnu/ld-2.28.so)
ls 13812 [003] 2167315.222667: 14 instructions:u: 7fac71e2d9ff _dl_cache_libcmp+0x1f (/lib/x86_64-linux-gnu/ld-2.28.so)
ls 13812 [003] 2167315.222667: 4 instructions:u: 7fac71e2dab2 _dl_cache_libcmp+0xd2 (/lib/x86_64-linux-gnu/ld-2.28.so)
ls 13812 [003] 2167315.222728: 16423 instructions:u: 7fac71e2477a _dl_map_object_deps+0x1ba (/lib/x86_64-linux-gnu/ld-2.28.so)
ls 13812 [003] 2167315.222734: 12731 instructions:u: 7fac71e27938 _dl_name_match_p+0x68 (/lib/x86_64-linux-gnu/ld-2.28.so)
...
After:
$ perf script --itrace=i10us
ls 13812 [003] 2167315.222583: 3270 instructions:u: 7fac71e2e494 __GI___tunables_init+0xf4 (/lib/x86_64-linux-gnu/ld-2.28.so)
ls 13812 [003] 2167315.222667: 30902 instructions:u: 7fac71e2da0f _dl_cache_libcmp+0x2f (/lib/x86_64-linux-gnu/ld-2.28.so)
ls 13812 [003] 2167315.222728: 16479 instructions:u: 7fac71e2477a _dl_map_object_deps+0x1ba (/lib/x86_64-linux-gnu/ld-2.28.so)
...
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Fixes: f4aa081949 ("perf tools: Add Intel PT decoder")
Link: http://lkml.kernel.org/r/20190510124143.27054-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
XMM registers can be collected on Icelake and later platforms.
Add specific arch__intr_reg_mask(), which creating an event to check if
the kernel and hardware can collect XMM registers.
Test on Skylake which doesn't support XMM registers collection. There is
nothing changed.
#perf record -I?
available registers: AX BX CX DX SI DI BP SP IP FLAGS CS SS R8 R9
R10 R11 R12 R13 R14 R15
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-I, --intr-regs[=<any register>]
sample selected machine registers on
interrupt, use '-I?' to list register names
#perf record -I
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.905 MB perf.data (2520 samples) ]
#perf evlist -v
cycles: size: 112, { sample_period, sample_freq }: 4000, sample_type:
IP|TID|TIME|CPU|PERIOD|REGS_INTR, read_format: ID, disabled: 1,
inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, precise_ip: 3,
sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol:
1, bpf_event: 1, sample_regs_intr: 0xff0fff
Test on Icelake which support XMM registers collection.
#perf record -I?
available registers: AX BX CX DX SI DI BP SP IP FLAGS CS SS R8 R9 R10
R11 R12 R13 R14 R15 XMM0 XMM1 XMM2 XMM3 XMM4 XMM5 XMM6 XMM7 XMM8 XMM9
XMM10 XMM11 XMM12 XMM13 XMM14 XMM15
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-I, --intr-regs[=<any register>]
sample selected machine registers on
interrupt, use '-I?' to list register names
#perf record -I
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.800 MB perf.data (318 samples) ]
#perf evlist -v
cycles: size: 112, { sample_period, sample_freq }: 4000, sample_type:
IP|TID|TIME|CPU|PERIOD|REGS_INTR, read_format: ID, disabled: 1,
inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, precise_ip: 3,
sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol:
1, bpf_event: 1, sample_regs_intr: 0xffffffff00ff0fff
Committer notes:
Don't set attr.sample_period as a named struct init, as it is part of an
unnamed union in 'struct perf_event_attr', and doing so breaks the build
on older gcc versions, such as:
gcc version 4.1.2 20080704 (Red Hat 4.1.2-55)
gcc version 4.4.7 20120313 (Red Hat 4.4.7-23) (GCC)
arch/x86/util/perf_regs.c: In function 'arch__intr_reg_mask':
arch/x86/util/perf_regs.c:279: error: unknown field 'sample_period' specified in initializer
cc1: warnings being treated as errors
arch/x86/util/perf_regs.c:279: warning: missing braces around initializer
arch/x86/util/perf_regs.c:279: warning: (near initialization for 'attr.<anonymous>')
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
[ Only on a lenovo t480s, a skylake machine, where the XMM registers didn't show up in -I?/--user-regs=? as expected ]
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1557865174-56264-3-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There may be different register mask for use with intr or user on some
platforms, e.g. Icelake.
Add weak functions arch__intr_reg_mask() and arch__user_reg_mask() to
return intr and user register mask respectively.
Check mask before printing or comparing the register name.
Generic code always return PERF_REGS_MASK. No functional change.
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1557865174-56264-2-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
- more unified assembly conversions for clang
- drop obsolete -mauto-it assembler option
- remove arm_memory_present in preference to the generic version
- remove unused asm/limits.h header
- vdso linker update
We tried to make the assembler warn if unified syntax was not used,
but unfortunately older versions of GCC warn, so the commit had to
be reverted.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=719N
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM updates from Russell King:
"ARM development updates:
- more unified assembly conversions for clang
- drop obsolete -mauto-it assembler option
- remove arm_memory_present in preference to the generic version
- remove unused asm/limits.h header
- vdso linker update
We tried to make the assembler warn if unified syntax was not used,
but unfortunately older versions of GCC warn, so the commit had to be
reverted"
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
Revert "ARM: 8846/1: warn if divided syntax assembler is used"
ARM: 8858/1: vdso: use $(LD) instead of $(CC) to link VDSO
ARM: 8855/1: remove unused <asm/limits.h>
ARM: 8850/1: use memblocks_present
ARM: 8854/1: drop -mauto-it
ARM: 8846/1: warn if divided syntax assembler is used
ARM: 8853/1: drop WASM to work around LLVM issue
ARM: 8852/1: uaccess: use unified assembler language syntax
ARM: 8851/1: add TUSERCOND() macro for conditional postfix
- Mostly the usual churn due to options being reordered or not added
in the right locations.
- Some various enabling of new drivers, etc.
... i.e. the usual updates, nothing particularly sticks out.
-----BEGIN PGP SIGNATURE-----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=IKfA
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC defconfig updates from Olof Johansson:
"Mostly the usual churn due to options being reordered or not added in
the right locations.
Some various enabling of new drivers, etc.
... i.e. the usual updates, nothing particularly sticks out"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (23 commits)
arm64: defconfig: Update UFSHCD for Hi3660 soc
ARM: multi_v7_defconfig: Enable support for STPMIC1
ARM: multi_v7_defconfig: Enable missing drivers for supported Chromebooks
arm64: defconfig: enable mv-xor driver
ARM: Enable Trusted Foundations for multiplatform ARM v7
ARM: tegra: Enable Trusted Foundations by default
ARM: tegra: Update default configuration for v5.1-rc1
ARM: multi_v7_defconfig: Update for moved options
ARM: multi_v7_defconfig: Update for dropped options
ARM: shmobile: Enable USB [EO]HCI HCD PLATFORM support in shmobile_defconfig
ARM: shmobile: Enable PHY_RCAR_GEN3_USB2 in shmobile_defconfig
ARM: qcom_defconfig: add options for LG Nexus 5 phone
arm64: defconfig: include the Agilex platform to the arm64 defconfig
arm64: defconfig: Add PWM Fan support
arm64: defconfig: Enable Tegra HDA support
ARM: multi_v7_defconfig: Enable support for CFI NOR FLASH
ARM: shmobile: defconfig: Enable support for CFI NOR FLASH
ARM: shmobile: defconfig: Refresh for v5.1-rc1
ARM: multi_v7_defconfig: enable the Amlogic Meson ADC and eFuse drivers
arm64: defconfig: enable fpga and service layer
...
Wire up the mount API syscalls on non-x86 arches.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Fix the syscall numbering of the mount API syscalls so that the numbers
match between i386 and x86_64 and that they're in the common numbering
scheme space.
Fixes: a07b200047 ("vfs: syscall: Add open_tree(2) to reference or clone a mount")
Fixes: 2db154b3ea ("vfs: syscall: Add move_mount(2) to move mounts around")
Fixes: 24dcb3d90a ("vfs: syscall: Add fsopen() to prepare for superblock creation")
Fixes: ecdab150fd ("vfs: syscall: Add fsconfig() for configuring and managing a context")
Fixes: 93766fbd26 ("vfs: syscall: Add fsmount() to create a mount for a superblock")
Fixes: cf3cba4a42 ("vfs: syscall: Add fspick() to select a superblock for reconfiguration")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Make the name of the anon inode fd "[fscontext]" instead of "fscontext".
This is minor but most core-kernel anon inode fds already carry square
brackets around their name:
[eventfd]
[eventpoll]
[fanotify]
[io_uring]
[pidfd]
[signalfd]
[timerfd]
[userfaultfd]
For the sake of consistency lets do the same for the fscontext anon inode
fd that comes with the new mount api.
Signed-off-by: Christian Brauner <christian@brauner.io>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Various driver updates for platforms and a couple of the small driver
subsystems we merge through our tree:
Among the larger pieces:
- Power management improvements for TI am335x and am437x (RTC suspend/wake)
- Misc new additions for Amlogic (socinfo updates)
- ZynqMP FPGA manager
- Nvidia improvements for reset/powergate handling
- PMIC wrapper for Mediatek MT8516
- Misc fixes/improvements for ARM SCMI, TEE, NXP i.MX SCU drivers
-----BEGIN PGP SIGNATURE-----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=YSfu
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC-related driver updates from Olof Johansson:
"Various driver updates for platforms and a couple of the small driver
subsystems we merge through our tree:
Among the larger pieces:
- Power management improvements for TI am335x and am437x (RTC
suspend/wake)
- Misc new additions for Amlogic (socinfo updates)
- ZynqMP FPGA manager
- Nvidia improvements for reset/powergate handling
- PMIC wrapper for Mediatek MT8516
- Misc fixes/improvements for ARM SCMI, TEE, NXP i.MX SCU drivers"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (57 commits)
soc: aspeed: fix Kconfig
soc: add aspeed folder and misc drivers
spi: zynqmp: Fix build break
soc: imx: Add generic i.MX8 SoC driver
MAINTAINERS: Update email for Qualcomm SoC maintainer
memory: tegra: Fix a typos for "fdcdwr2" mc client
Revert "ARM: tegra: Restore memory arbitration on resume from LP1 on Tegra30+"
memory: tegra: Replace readl-writel with mc_readl-mc_writel
memory: tegra: Fix integer overflow on tick value calculation
memory: tegra: Fix missed registers values latching
ARM: tegra: cpuidle: Handle tick broadcasting within cpuidle core on Tegra20/30
optee: allow to work without static shared memory
soc/tegra: pmc: Move powergate initialisation to probe
soc/tegra: pmc: Remove reset sysfs entries on error
soc/tegra: pmc: Fix reset sources and levels
soc: amlogic: meson-gx-pwrc-vpu: Add support for G12A
soc: amlogic: meson-gx-pwrc-vpu: Fix power on/off register bitmask
fpga manager: Adding FPGA Manager support for Xilinx zynqmp
dt-bindings: fpga: Add bindings for ZynqMP fpga driver
firmware: xilinx: Add fpga API's
...
Linus Torvalds