Commit Graph

45 Commits

Author SHA1 Message Date
Fred Lotter 96439889b4 nfp: flower: increase cmesg reply timeout
QA tests report occasional timeouts on REIFY message replies. Profiling
of the two cmesg reply types under burst conditions, with a 12-core host
under heavy cpu and io load (stress --cpu 12 --io 12), show both PHY MTU
change and REIFY replies can exceed the 10ms timeout. The maximum MTU
reply wait under burst is 16ms, while the maximum REIFY wait under 40 VF
burst is 12ms. Using a 4 VF REIFY burst results in an 8ms maximum wait.
A larger VF burst does increase the delay, but not in a linear enough
way to justify a scaled REIFY delay. The worse case values between
MTU and REIFY appears close enough to justify a common timeout. Pick a
conservative 40ms to make a safer future proof common reply timeout. The
delay only effects the failure case.

Change the REIFY timeout mechanism to use wait_event_timeout() instead
of wait_event_interruptible_timeout(), to match the MTU code. In the
current implementation, theoretically, a signal could interrupt the
REIFY waiting period, with a return code of ERESTARTSYS. However, this is
caught under the general timeout error code EIO. I cannot see the benefit
of exposing the REIFY waiting period to signals with such a short delay
(40ms), while the MTU mechnism does not use the same logic. In the absence
of any reply (wakeup() call), both reply types will wake up the task after
the timeout period. The REIFY timeout applies to the entire representor
group being instantiated (e.g. VFs), while the MTU timeout apples to a
single PHY MTU change.

Signed-off-by: Fred Lotter <frederik.lotter@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-16 15:23:14 -08:00
John Hurley 65b7970edf nfp: flower: increase scope of netdev checking functions
Both the actions and tunnel_conf files contain local functions that check
the type of an input netdev. In preparation for re-use with tunnel offload
via indirect blocks, move these to static inline functions in a header
file.

Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-11 09:54:53 -08:00
Pieter Jansen van Vuuren 4234d62c27 nfp: flower: add ipv6 set flow label and hop limit offload
Add ipv6 set flow label and hop limit action offload. Since pedit sets
headers per 4 byte word, we need to ensure that setting either version,
priority, payload_len or nexthdr does not get offloaded.

Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-07 11:45:21 -08:00
Pieter Jansen van Vuuren a3c6b063fe nfp: flower: add ipv4 set ttl and tos offload
Add ipv4 set ttl and tos action offload. Since pedit sets headers per 4
byte word, we need to ensure that setting either version, ihl, protocol,
total length or checksum does not get offloaded.

Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-07 11:45:21 -08:00
Jakub Kicinski 96de25060d nfp: replace long license headers with SPDX
Replace the repeated license text with SDPX identifiers.
While at it bump the Copyright dates for files we touched
this year.

Signed-off-by: Edwin Peer <edwin.peer@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Nic Viljoen <nick.viljoen@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11 12:16:21 -07:00
Pieter Jansen van Vuuren 0a22b17a6b nfp: flower: add geneve option match offload
Introduce a new layer for matching on geneve options. This allows
offloading filters configured to match geneve with options.

Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-07 12:22:15 -07:00
Pieter Jansen van Vuuren 9e7c32fe44 nfp: flower: add geneve option push action offload
Introduce new push geneve option action. This allows offloading
filters configured to entunnel geneve with options.

Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-07 12:22:15 -07:00
John Hurley d7ff7ec573 nfp: flower: allow matching on ipv4 UDP tunnel tos and ttl
The addition of FLOW_DISSECTOR_KEY_ENC_IP to TC flower means that the ToS
and TTL of the tunnel header can now be matched on.

Extend the NFP tunnel match function to include these new fields.

Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-07 12:22:14 -07:00
John Hurley 51a8cefc6e nfp: flower: offload tos and tunnel flags for ipv4 udp tunnels
Extract the tos and the tunnel flags from the tunnel key and offload these
action fields. Only the checksum and tunnel key flags are implemented in
fw so reject offloads of other flags. The tunnel key flag is always
considered set in the fw so enforce that it is set in the rule. Note that
the compulsory setting of the tunnel key flag and optional setting of
checksum is inline with how tc currently generates ipv4 udp tunnel
actions.

Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-30 21:31:56 +09:00
John Hurley 7e24a59311 nfp: flower: compute link aggregation action
If the egress device of an offloaded rule is a LAG port, then encode the
output port to the NFP with a LAG identifier and the offloaded group ID.

A prelag action is also offloaded which must be the first action of the
series (although may appear after other pre-actions - e.g. tunnels). This
causes the FW to check that it has the necessary information to output to
the requested LAG port. If it does not, the packet is sent to the kernel
before any other actions are applied to it.

Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-24 23:10:57 -04:00
John Hurley 898bc7d634 nfp: flower: check for/turn on LAG support in firmware
Check if the fw contains the _abi_flower_balance_sync_enable symbol. If it
does then write a 1 to this indicating that the driver is willing to
receive NIC to kernel LAG related control messages.

If the write is successful, update the list of extra features supported by
the fw and add a stub to accept LAG cmsgs.

Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-24 23:10:56 -04:00
John Hurley 50a5852a65 nfp: flower: set tunnel ttl value to net default
Firmware requires that the ttl value for an encapsulating ipv4 tunnel
header be included as an action field. Prior to the support of Geneve
tunnel encap (when ttl set was removed completely), ttl value was
extracted from the tunnel key. However, tests have shown that this can
still produce a ttl of 0.

Fix the issue by setting the namespace default value for each new tunnel.
Follow up patch for net-next will do a full route lookup.

Fixes: 3ca3059dc3 ("nfp: flower: compile Geneve encap actions")
Fixes: b27d6a95a7 ("nfp: compile flower vxlan tunnel set actions")
Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-01 18:59:57 -04:00
Pieter Jansen van Vuuren cf2cbadc20 nfp: flower: split and limit cmsg skb lists
Introduce a second skb list for handling control messages and limit the
number of allowed messages. Some control messages are considered more
crucial than others, resulting in the need for a second skb list. By
splitting the list into a separate high and low priority list we can
ensure that messages on the high list get added to the head of the list
that gets processed, this however has no functional impact. Previously
there was no limit on the number of messages allowed on the queue, this
could result in the queue growing boundlessly and eventually the host
running out of memory.

Fixes: b985f870a5 ("nfp: process control messages in workqueue in flower app")
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-12 21:57:28 -04:00
John Hurley 29a5dcae27 nfp: flower: offload phys port MTU change
Trigger a port mod message to request an MTU change on the NIC when any
physical port representor is assigned a new MTU value. The driver waits
10 msec for an ack that the FW has set the MTU. If no ack is received the
request is rejected and an appropriate warning flagged.

Rather than maintain an MTU queue per repr, one is maintained per app.
Because the MTU ndo is protected by the rtnl lock, there can never be
contention here. Portmod messages from the NIC are also protected by
rtnl so we first check if the portmod is an ack and, if so, handle outside
rtnl and the cmsg work queue.

Acks are detected by the marking of a bit in a portmod response. They are
then verfied by checking the port number and MTU value expected by the
app. If the expected MTU is 0 then no acks are currently expected.

Also, ensure that the packet headroom reserved by the flower firmware is
considered when accepting an MTU change on any repr.

Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-30 10:18:55 -04:00
Pieter Jansen van Vuuren 71ea5343a0 nfp: flower: implement ip fragmentation match offload
Implement ip fragmentation match offloading for both IPv4 and IPv6. Allows
offloading frag, nofrag, first and nofirstfrag classification.

Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26 13:01:09 -04:00
Pieter Jansen van Vuuren 07e1671cfc nfp: flower: refactor shared ip header in match offload
Refactored shared ip header code for IPv4 and IPv6 in match offload.

Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26 13:01:09 -04:00
Pieter Jansen van Vuuren ffa61202fe nfp: flower: implement tcp flag match offload
Implement tcp flag match offloading. Current tcp flag match support include
FIN, SYN, RST, PSH and URG flags, other flags are unsupported. The PSH and
URG flags are only set in the hardware fast path when used in combination
with the SYN, RST and PSH flags.

Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-16 16:24:24 -05:00
Dirk van der Merwe d2c2928d86 nfp: flower: implement the PORT_REIFY message
The PORT_REIFY message indicates whether reprs have been created or
when they are about to be destroyed. This is necessary so firmware
can know which state the driver is in, e.g. the firmware will not send
any control messages related to ports when the reprs are destroyed.

This prevents nuisance warning messages printed whenever the firmware
sends updates for non-existent reprs.

Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-03 12:17:49 -05:00
John Hurley 3ca3059dc3 nfp: flower: compile Geneve encap actions
Generate rules for the NFP to encapsulate packets in Geneve tunnels. Move
the vxlan action code to generic udp tunnel actions and use core code for
both vxlan and Geneve.

Only support outputting to well known port 6081. Setting tunnel options
is not supported yet.

Only attempt to offload if the fw supports Geneve.

Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19 14:52:13 -05:00
John Hurley bedeca15af nfp: flower: compile Geneve match fields
Compile Geneve match fields for offloading to the NFP. The addition of
Geneve overflows the 8 bit key_layer field, so apply extended metadata to
the match cmsg allowing up to 32 more key_layer fields.

Rather than adding new Geneve blocks, move the vxlan code to generic ipv4
udp tunnel structs and use these for both vxlan and Geneve.

Matches are only supported when specifically mentioning well known port
6081. Geneve tunnel options are not yet included in the match.

Only offload Geneve if the fw supports it - include check for this.

Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19 14:52:12 -05:00
John Hurley 197171e5ba nfp: flower: remove unused defines
Delete match field defines that are not supported at this time.

Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-11 12:08:04 -05:00
John Hurley a427673e1f nfp: flower: remove dead code paths
Port matching is selected by default on every rule so remove check for it
and delete 'else' side of the statement. Remove nfp_flower_meta_one as now
it will not feature in the code. Rename nfp_flower_meta_two given that one
has been removed.

'Additional metadata' if statement can never be true so remove it as well.

Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-11 12:07:57 -05:00
John Hurley dc4646a950 nfp: flower: vxlan - ensure no sleep in atomic context
Functions called by the netevent notifier must be in atomic context.
Change the mutex to spinlock and ensure mem allocations are done with the
atomic flag.
Also, remove unnecessary locking after notifiers are unregistered.

Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02 20:27:11 +09:00
Pieter Jansen van Vuuren 62d3f60b4d nfp: use struct fields for 8 bit-wide access
Use direct access struct fields rather than PREP_FIELD()
macros to manipulate the jump ID and length, both of which
are exactly 8-bits wide. This simplifies the code somewhat.

Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-22 03:09:32 +01:00
Pieter Jansen van Vuuren f8b7b0a6b1 nfp: add set tcp and udp header action flower offload
Previously we did not have offloading support for set TCP/UDP actions. This
patch enables TC flower offload of set TCP/UDP sport and dport actions.

Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-06 09:56:36 -07:00
Pieter Jansen van Vuuren 354b82bb32 nfp: add set ipv6 source and destination address
Previously we did not have offloading support for set IPv6 actions. This
patch enables TC flower offload of set IPv6 src and dst address actions.

Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-06 09:56:36 -07:00
Pieter Jansen van Vuuren c0b1bd9a8b nfp: add set ipv4 header action flower offload
Previously we did not have offloading support for set IPv4 actions. This
patch enables TC flower offload of set IPv4 src and dst address actions.

Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-06 09:56:36 -07:00
Pieter Jansen van Vuuren da83d8fe58 nfp: add set ethernet header action flower offload
Previously we did not have offloading support for set ethernet actions.
This patch enables TC flower offload of set ethernet actions.

Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-06 09:56:35 -07:00
Pieter Jansen van Vuuren bb055c198d nfp: add mpls match offloading support
Previously MPLS match offloading was not supported. This patch enables
MPLS match offloading support for label, bos and tc fields.

Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-06 09:56:35 -07:00
John Hurley 856f5b1357 nfp: flower vxlan neighbour keep-alive
Periodically receive messages containing the destination IPs of tunnels
that have recently forwarded traffic. Update the neighbour entries 'used'
value for these IPs next hop.

This prevents the neighbour entry from expiring on timeout but rather
signals an ARP to verify the connection. From an NFP perspective, packets
will not fall back mid-flow unless the link is verified to be down.

Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-26 21:27:36 -07:00
John Hurley 8e6a9046b6 nfp: flower vxlan neighbour offload
Receive a request when the NFP does not know the next hop for a packet
that is to be encapsulated in a VXLAN tunnel. Do a route lookup, determine
the next hop entry and update neighbour table on NFP. Monitor the kernel
neighbour table for link changes and update NFP with relevant information.
Overwrite routes with zero values on the NFP when they expire.

Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-26 21:27:36 -07:00
John Hurley 2d9ad71a8c nfp: offload vxlan IPv4 endpoints of flower rules
Maintain a list of IPv4 addresses used as the tunnel destination IP match
fields in currently active flower rules. Offload the entire list of
NFP_FL_IPV4_ADDRS_MAX (even if some are unused) when new IPs are added or
removed. The NFP should only be aware of tunnel end points that are
currently used by rules on the device

Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-26 21:27:36 -07:00
John Hurley fd0dd1ab1e nfp: offload flower vxlan endpoint MAC addresses
Generate a list of MAC addresses of netdevs that could be used as VXLAN
tunnel end points. Give offloaded MACs an index for storage on the NFP in
the ranges:
0x100-0x1ff physical port representors
0x200-0x2ff VF port representors
0x300-0x3ff other offloads (e.g. vxlan netdevs, ovs bridges)

Assign phys and vf indexes based on unique 8 bit values in the port num.
Maintain list of other netdevs to ensure same netdev is not offloaded
twice and each gets a unique ID without exhausting the entries. Because
the IDs are unique but constant for a netdev, any changes are implemented
by overwriting the index on NFP.

Signed-off-by: John Hurley <john.hurley@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-26 21:27:36 -07:00
John Hurley b27d6a95a7 nfp: compile flower vxlan tunnel set actions
Compile set tunnel actions for tc flower. Only support VXLAN and ensure a
tunnel destination port of 4789 is used.

Signed-off-by: John Hurley <john.hurley@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-26 21:27:35 -07:00
John Hurley 611aec101a nfp: compile flower vxlan tunnel metadata match fields
Compile ovs-tc flower vxlan metadata match fields for offloading. Only
support offload of tunnel data when the VXLAN port specifically matches
well known port 4789.

Signed-off-by: John Hurley <john.hurley@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-26 21:27:35 -07:00
John Hurley 79ede4ae2d nfp: add helper to get flower cmsg length
Add a helper function that returns the length of the cmsg data when given
the cmsg skb

Signed-off-by: John Hurley <john.hurley@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-26 21:27:35 -07:00
Simon Horman b985f870a5 nfp: process control messages in workqueue in flower app
Processing of control messages is not time-critical and future processing
of some messages will require taking the RTNL which is not possible
in a BH handler. It seems simplest to move all control message processing
to a workqueue.

Signed-off-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-16 11:36:44 -07:00
Simon Horman 12acb133ec nfp: send control message when MAC representors are created
The firmware expects a MAC_REPR control message when a MAC representor
is created. The driver should expect a PORTMOD message to follow which
will provide the link states of the physical port associated with the MAC
representor.

Signed-off-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 14:51:17 -07:00
Pieter Jansen van Vuuren 81f3ddf254 nfp: add control message passing capabilities to flower offloads
Previously the flower offloads never sends messages to the hardware,
and never registers a handler for receiving messages from hardware.
This patch enables the flower offloads to send control messages to
hardware when adding and removing flow rules. Additionally it
registers a control message rx handler for receiving stats updates
from hardware for each offloaded flow.

Additionally this patch adds 4 control message types; Add, modify and
delete flow, as well as flow stats. It also allows
nfp_flower_cmsg_get_data() to be used outside of cmsg.c.

Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01 08:51:32 -07:00
Pieter Jansen van Vuuren abfcdc1de9 nfp: add a stats handler for flower offloads
Previously there was no way of updating flow rule stats after they
have been offloaded to hardware. This is solved by keeping track of
stats received from hardware and providing this to the TC handler
on request.

Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01 08:51:32 -07:00
Pieter Jansen van Vuuren 1a1e586f54 nfp: add basic action capabilities to flower offloads
Adds push vlan, pop vlan, output and drop action capabilities
to flower offloads.

Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01 08:51:32 -07:00
Pieter Jansen van Vuuren 5571e8c9f2 nfp: extend flower matching capabilities
Extends matching capabilities for flower offloads to include vlan,
layer 2, layer 3 and layer 4 type matches. This includes both exact
and wildcard matching.

Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01 08:51:32 -07:00
Pieter Jansen van Vuuren af9d842c13 nfp: extend flower add flow offload
Extends the flower flow add function by calculating which match
fields are present in the flower offload structure and allocating
the appropriate space to describe these.

Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01 08:51:32 -07:00
Jakub Kicinski 5d7c64a70f nfp: move representors' struct net_device_ops to shared code
Apps shouldn't declare their own struct net_device_ops for
representors, this makes sharing code harder.  Add necessary
nfp_app callbacks and move the definition of representors'
struct net_device_ops to common code.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-27 15:48:48 -04:00
Simon Horman 948faa46c0 nfp: add support for control messages for flower app
In preparation for adding a new flower app - targeted at offloading
the flower classifier - provide support for control message that it will
use to communicate with the NFP.

Based in part on work by Bert van Leeuwen.

Signed-off-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-25 11:42:01 -04:00