Commit Graph

219 Commits

Author SHA1 Message Date
Christoph Hellwig 6ad112bfb5 xfs: simplify xfs_buf_get / xfs_buf_read interfaces
Currently the low-level buffer cache interfaces are highly confusing
as we have a _flags variant of each that does actually respect the
flags, and one without _flags which has a flags argument that gets
ignored and overriden with a default set.  Given that very few places
use the default arguments get rid of the duplication and convert all
callers to pass the flags explicitly.  Also remove the now confusing
_flags postfix.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
2009-12-11 15:11:21 -06:00
Christoph Hellwig c56c9631cb xfs: fix mmap_sem/iolock inversion in xfs_free_eofblocks
When xfs_free_eofblocks is called from ->release the VM might already
hold the mmap_sem, but in the write path we take the iolock before
taking the mmap_sem in the generic write code.

Switch xfs_free_eofblocks to only trylock the iolock if called from
->release and skip trimming the prellocated blocks in that case.
We'll still free them later on the final iput.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
2009-12-11 15:11:19 -06:00
Christoph Hellwig 848ce8f731 xfs: simplify inode teardown
Currently the reclaim code for the case where we don't reclaim the
final reclaim is overly complicated.  We know that the inode is clean
but instead of just directly reclaiming the clean inode we go through
the whole process of marking the inode reclaimable just to directly
reclaim it from the calling context.  Besides being overly complicated
this introduces a race where iget could recycle an inode between
marked reclaimable and actually being reclaimed leading to panics.

This patch gets rid of the existing reclaim path, and replaces it with
a simple call to xfs_ireclaim if the inode was clean.  While we're at
it we also use the slightly more lax xfs_inode_clean check we'd use
later to determine if we need to flush the inode here.

Finally get rid of xfs_reclaim function and place the remaining small
bits of reclaim code directly into xfs_fs_destroy_inode.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Patrick Schreurs <patrick@news-service.com>
Reported-by: Tommy van Leeuwen <tommy@news-service.com>
Tested-by: Patrick Schreurs <patrick@news-service.com>
Reviewed-by: Alex Elder <aelder@sgi.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
2009-12-11 15:11:19 -06:00
Christoph Hellwig f9581b1443 xfs: implement ->dirty_inode to fix timestamp handling
This is picking up on Felix's repost of Dave's patch to implement a
.dirty_inode method.  We really need this notification because
the VFS keeps writing directly into the inode structure instead
of going through methods to update this state.  In addition to
the long-known atime issue we now also have a caller in VM code
that updates c/mtime that way for shared writeable mmaps.  And
I found another one that no one has noticed in practice in the FIFO
code.

So implement ->dirty_inode to set i_update_core whenever the
inode gets externally dirtied, and switch the c/mtime handling to
the same scheme we already use for atime (always picking up
the value from the Linux inode).

Note that this patch also removes the xfs_synchronize_atime call
in xfs_reclaim it was superflous as we already synchronize the time
when writing the inode via the log (xfs_inode_item_format) or the
normal buffers (xfs_iflush_int).

In addition also remove the I_CLEAR check before copying the Linux
timestamps - now that we always have the Linux inode available
we can always use the timestamps in it.

Also switch to just using file_update_time for regular reads/writes -
that will get us all optimization done to it for free and make
sure we notice early when it breaks.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
Reviewed-by: Alex Elder <aelder@sgi.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
2009-10-08 12:00:03 -05:00
Christoph Hellwig 4734d401d4 xfs: use correct log reservation when handling ENOSPC in xfs_create
We added the ENOSPC handling patch in xfs_create just after it got mered
with xfs_mkdir.  Change the log reservation to the variable for either
the create or mkdir value so it does the right thing if get here for creating
a directory.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
2009-09-09 18:19:02 -05:00
Christoph Hellwig 13e6d5cdde xfs: merge fsync and O_SYNC handling
The guarantees for O_SYNC are exactly the same as the ones we need to
make for an fsync call (and given that Linux O_SYNC is O_DSYNC the
equivalent is fdadatasync, but we treat both the same in XFS), except
with a range data writeout.  Jan Kara has started unifying these two
path for filesystems using the generic helpers, and I've started to
look at XFS.

The actual transaction commited by xfs_fsync and xfs_write_sync_logforce
has a different transaction number, but actually is exactly the same.
We'll only use the fsync transaction going forward.  One major difference
is that xfs_write_sync_logforce never issues a cache flush unless we
commit a transaction causing that as a side-effect, which is an obvious
bug in the O_SYNC handling.  Second all the locking and i_update_size
vs i_update_core changes from 978b723712
never made it to xfs_write_sync_logforce, so we add them back.

To make xfs_fsync easily usable from the O_SYNC path, the filemap_fdatawait
call is moved up to xfs_file_fsync, so that we don't wait on the whole
file after we already waited for our portion in xfs_write.

We'll also use a plain call to filemap_write_and_wait_range instead
of the previous sync_page_rang which did it in two steps including
an half-hearted inode write out that doesn't help us.

Once we're done with this also remove the now useless i_update_size
tracking.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
2009-09-01 12:45:57 -05:00
Eric Sandeen d96f8f891f xfs: add more statics & drop some unused functions
A lot more functions could be made static, but they need
forward declarations; this does some easy ones, and also
found a few unused functions in the process.

Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
2009-08-31 14:46:20 -05:00
Christoph Hellwig 7b02ecb303 xfs: switch to NOFS allocation under i_lock in xfs_readlink_bmap
xfs_readlink_bmap is called with i_lock held, but i_lock is taken in
reclaim context so all allocations under it must avoid recursions into
the filesystem.

Reported by the new reclaim context tracing in lockdep.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
2009-08-12 01:07:53 -05:00
Christoph Hellwig ef14f0c157 xfs: use generic Posix ACL code
This patch rips out the XFS ACL handling code and uses the generic
fs/posix_acl.c code instead.  The ondisk format is of course left
unchanged.

This also introduces the same ACL caching all other Linux filesystems do
by adding pointers to the acl and default acl in struct xfs_inode.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
2009-06-10 17:07:47 +02:00
Christoph Hellwig 7d095257e3 xfs: kill xfs_qmops
Kill the quota ops function vector and replace it with direct calls or
stubs in the CONFIG_XFS_QUOTA=n case.

Make sure we check XFS_IS_QUOTA_RUNNING in the right spots.  We can remove
the number of those checks because the XFS_TRANS_DQ_DIRTY flag can't be set
otherwise.

This brings us back closer to the way this code worked in IRIX and earlier
Linux versions, but we keep a lot of the more useful factoring of common
code.

Eventually we should also kill xfs_qm_bhv.c, but that's left for a later
patch.

Reduces the size of the source code by about 250 lines and the size of
XFS module by about 1.5 kilobytes with quotas enabled:

   text	   data	    bss	    dec	    hex	filename
 615957	   2960	   3848	 622765	  980ad	fs/xfs/xfs.o
 617231	   3152	   3848	 624231	  98667	fs/xfs/xfs.o.old

Fallout:

 - xfs_qm_dqattach is split into xfs_qm_dqattach_locked which expects
   the inode locked and xfs_qm_dqattach which does the locking around it,
   thus removing XFS_QMOPT_ILOCKED.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
2009-06-08 15:33:32 +02:00
Dave Chinner 153fec43ce xfs: flush delayed allcoation blocks on ENOSPC in create
If we are creating lots of small files, we can fail to get
a reservation for inode create earlier than we should due to
EOF preallocation done during delayed allocation reservation.
Hence on the first reservation ENOSPC failure flush all the
delayed allocation blocks out of the system and retry.

This fixes the last commonly triggered spurious ENOSPC issue
that has been reported.

Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2009-04-06 18:48:30 +02:00
Malcolm Parsons 9da096fd13 xfs: fix various typos
Signed-off-by: Malcolm Parsons <malcolm.parsons@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2009-03-29 09:55:42 +02:00
Christoph Hellwig cb4c8cc1e9 xfs: kill VN_BAD
Remove this rather pointless wrapper and use is_bad_inode directly.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
2009-03-16 08:25:25 +01:00
Christoph Hellwig 517b5e8c85 xfs: merge xfs_mkdir into xfs_create
xfs_create and xfs_mkdir only have minor differences, so merge both of them
into a sigle function.  While we're at it also make the error handling code
more straight-forward.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Dave Chinner <david@fromorbit.com>
2009-02-09 08:38:02 +01:00
Christoph Hellwig d4bb6d0698 xfs: merge xfs_inode_flush into xfs_fs_write_inode
Splitting the task for a VFS-induced inode flush into two functions doesn't
make any sense, so merge the two functions dealing with it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
Reviewed-by: Dave Chinner <david@fromorbit.com>
2009-02-04 09:36:19 +01:00
Christoph Hellwig cb3f35bb3b xfs: tiny cleanup for xfs_link
The source and target inodes are guaranteed to never be the same by the VFS,
so no need to check for that (and we would get into bad trouble later anyway
if that were the case).  Also clean up the error handling to use two gotos
instead of nested conditions.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
2009-02-04 09:34:20 +01:00
Eric Sandeen 9d87c3192d [XFS] Remove the rest of the macro-to-function indirections.
Remove the last of the macros-defined-to-static-functions.

Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2009-01-16 17:10:42 +11:00
Christoph Hellwig c4cd747ee6 [XFS] use inode_change_ok for setattr permission checking
Instead of implementing our own checks use inode_change_ok to check for
necessary permission in setattr.  There is a slight change in behaviour
as inode_change_ok doesn't allow i_mode updates to add the suid or sgid
without superuser privilegues while the old XFS code just stripped away
those bits from the file mode.

(First sent on Semptember 29th)

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-12-11 13:15:10 +11:00
Lachlan McIlroy c6422617a1 [XFS] Check return value of xfs_buf_get_noaddr()
We check the return value of all other calls to xfs_buf_get_noaddr().
Make sense to do it here too.

Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
2008-12-05 13:16:15 +11:00
Christoph Hellwig 25e41b3d52 move vn_iowait / vn_iowake into xfs_aops.c
The whole machinery to wait on I/O completion is related to the I/O path
and should be there instead of in xfs_vnode.c.  Also give the functions
more descriptive names.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
2008-12-04 15:39:24 +11:00
Dave Chinner 26c5295135 [XFS] remove i_gen from incore inode
i_gen is incremented in directory operations when the
directory is changed. It is never read or otherwise used
so it should be removed to help reduce the size of the
struct xfs_inode.

The patch also removes a duplicate logging of the directory
inode core. We only need to do this once per transaction
so kill the one associated with the i_gen increment.

Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
2008-12-01 11:37:10 +11:00
Dave Chinner 2e6560929d [XFS] fix error inversion problems with data flushing
XFS gets the sign of the error wrong in several places when
gathering the error from generic linux functions. These functions
return negative error values, while the core XFS code returns
positive error values. Hence when XFS inverts the error to be
returned to the VFS, it can incorrectly invert a negative
error and this error will be ignored by the syscall return.

Fix all the problems related to calling filemap_* functions.

Problem initially identified by Nick Piggin in xfs_fsync().

Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
2008-12-01 11:11:10 +11:00
Christoph Hellwig f999a5bf3f [XFS] wire up ->open for directories
Currently there's no ->open method set for directories on XFS.  That
means we don't perform any check for opening too large directories
without O_LARGEFILE, we don't check for shut down filesystems, and we
don't actually do the readahead for the first block in the directory.

Instead of just setting the directories open routine to xfs_file_open
we merge the shutdown check directly into xfs_file_open and create
a new xfs_dir_open that first calls xfs_file_open and then performs
the readahead for block 0.

(First sent on September 29th)

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
2008-12-01 11:07:08 +11:00
Dave Chinner cc09c0dc57 [XFS] Fix double free of log tickets
When an I/O error occurs during an intermediate commit on a rolling
transaction, xfs_trans_commit() will free the transaction structure
and the related ticket. However, the duplicate transaction that
gets used as the transaction continues still contains a pointer
to the ticket. Hence when the duplicate transaction is cancelled
and freed, we free the ticket a second time.

Add reference counting to the ticket so that we hold an extra
reference to the ticket over the transaction commit. We drop the
extra reference once we have checked that the transaction commit
did not return an error, thus avoiding a double free on commit
error.

Credit to Nick Piggin for tripping over the problem.

SGI-PV: 989741

Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-11-17 17:37:10 +11:00
Tim Shimmin e0b8e8b65d [XFS] remove restricted chown parameter from xfs linux
On Linux all filesystems are supposed to be operating under Posix'
restricted chown. Restricted chown means it restricts chown to the owner
unless you have CAP_FOWNER.

NOTE: that 2 files outside of fs/xfs have been modified too for this
change.

Reviewed-by: Dave Chinner <david@fromorbit.com>

SGI-PV: 988919

SGI-Modid: xfs-linux-melb:xfs-kern:32413a

Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-10-30 18:30:48 +11:00
Christoph Hellwig ea5a3dc835 [XFS] kill sys_cred
capable_cred has been unused for a while so we can kill it and sys_cred.
That also means the cred argument to xfs_setattr and xfs_change_file_space
can be removed now.

SGI-PV: 988918

SGI-Modid: xfs-linux-melb:xfs-kern:32412a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-10-30 18:27:48 +11:00
Christoph Hellwig 2b7035fd74 [XFS] Trivial xfs_remove comment fixup
The dp to ip comment should be for the unconditional xfs_droplink call,
and the "." link obviously only exists for directories, so it should be in
the is_dir conditional.

SGI-PV: 987246

SGI-Modid: xfs-linux-melb:xfs-kern:32374a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-10-30 17:55:18 +11:00
David Chinner 116545130c [XFS] kill deleted inodes list
Now that the deleted inodes list is unused, kill it. This also removes the
i_reclaim list head from the xfs_inode, shrinking it by two pointers.

SGI-PV: 988142

SGI-Modid: xfs-linux-melb:xfs-kern:32334a

Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
2008-10-30 17:37:49 +11:00
David Chinner 396beb8531 [XFS] mark inodes for reclaim via a tag in the inode radix tree
Prepare for removing the deleted inode list by marking inodes for reclaim
in the inode radix trees so that we can use the radix trees to find
reclaimable inodes.

SGI-PV: 988142

SGI-Modid: xfs-linux-melb:xfs-kern:32331a

Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
2008-10-30 17:37:26 +11:00
David Chinner 1dc3318ae1 [XFS] rename inode reclaim functions
The function names xfs_finish_reclaim and xfs_finish_reclaim_all are not
very descriptive of what they are reclaiming. Rename to
xfs_reclaim_inode[s] to match the xfs_sync_inodes() function.

SGI-PV: 988142

SGI-Modid: xfs-linux-melb:xfs-kern:32330a

Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
2008-10-30 17:37:15 +11:00
David Chinner fce08f2f3b [XFS] move inode reclaim functions to xfs_sync.c
Background inode reclaim is run by the xfssyncd. Move the reclaim worker
functions to be close to the sync code as the are very similar in
structure and are both run from the same background thread.

SGI-PV: 988142

SGI-Modid: xfs-linux-melb:xfs-kern:32329a

Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
2008-10-30 17:37:03 +11:00
David Chinner bf904248a2 [XFS] Combine the XFS and Linux inodes
To avoid issues with different lifecycles of XFS and Linux inodes, embedd
the linux inode inside the XFS inode. This means that the linux inode has
the same lifecycle as the XFS inode, even when it has been released by the
OS. XFS inodes don't live much longer than this (a short stint in reclaim
at most), so there isn't significant memory usage penalties here.

Version 3 o kill xfs_icount()

Version 2 o remove unused commented out code from xfs_iget(). o kill
useless cast in VFS_I()

SGI-PV: 988141

SGI-Modid: xfs-linux-melb:xfs-kern:32323a

Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
2008-10-30 17:36:14 +11:00
David Chinner 75c68f411b [XFS] Remove xfs_iflush_all and clean up xfs_finish_reclaim_all()
xfs_iflush_all() walks the m_inodes list to find inodes that need
reclaiming. We already have such a list - the m_del_inodes list. Replace
xfs_iflush_all() with a call to xfs_finish_reclaim_all() and clean up
xfs_finish_reclaim_all() to handle the different flush modes now needed.

Originally based on a patch from Christoph Hellwig.

Version 3 o rediff against new linux-2.6/xfs_sync.c code

Version 2 o revert xfs_syncsub() inode reclaim behaviour back to original

code o xfs_quiesce_fs() should use XFS_IFLUSH_DELWRI_ELSE_ASYNC, not

XFS_IFLUSH_ASYNC, to prevent change of behaviour.

SGI-PV: 988139

SGI-Modid: xfs-linux-melb:xfs-kern:32284a

Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
2008-10-30 17:06:28 +11:00
Lachlan McIlroy 2fd6f6ec64 [XFS] Don't do I/O beyond eof when unreserving space
When unreserving space with boundaries that are not block aligned we round
up the start and round down the end boundaries and then use this function,
xfs_zero_remaining_bytes(), to zero the parts of the blocks that got
dropped during the rounding. The problem is we don't consider if these
blocks are beyond eof. Worse still is if we encounter delayed allocations
beyond eof we will try to use the magic delayed allocation block number as
a real block number. If the file size is ever extended to expose these
blocks then we'll go through xfs_zero_eof() to zero them anyway.

SGI-PV: 983683

SGI-Modid: xfs-linux-melb:xfs-kern:32055a

Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
2008-09-17 16:52:50 +10:00
David Chinner f9114eba1e [XFS] Prevent lockdep false positives when locking two inodes.
If we call xfs_lock_two_inodes() to grab both the iolock and the ilock,
then drop the ilocks on both inodes, then grab them again (as
xfs_swap_extents() does) then lockdep will report a locking order problem.
This is a false positive.

To avoid this, disallow xfs_lock_two_inodes() fom locking both inode locks
at once - force calers to make two separate calls. This means that nested
dropping and regaining of the ilocks will retain the same lockdep subclass
and so lockdep will not see anything wrong with this code.

SGI-PV: 986238

SGI-Modid: xfs-linux-melb:xfs-kern:31999a

Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Peter Leckie <pleckie@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-09-17 16:51:21 +10:00
David Howells 9e2b2dc413 CRED: Introduce credential access wrappers
The patches that are intended to introduce copy-on-write credentials for 2.6.28
require abstraction of access to some fields of the task structure,
particularly for the case of one task accessing another's credentials where RCU
will have to be observed.

Introduced here are trivial no-op versions of the desired accessors for current
and other tasks so that other subsystems can start to be converted over more
easily.

Wrappers are introduced into a new header (linux/cred.h) for UID/GID,
EUID/EGID, SUID/SGID, FSUID/FSGID, cap_effective and current's subscribed
user_struct.  These wrappers are macros because the ordering between header
files mitigates against making them inline functions.

linux/cred.h is #included from linux/sched.h.

Further, XFS is modified such that it no longer defines and uses parameterised
versions of current_fs[ug]id(), thus getting rid of the namespace collision
otherwise incurred.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2008-08-14 09:35:23 +10:00
Christoph Hellwig dff35fd41f [XFS] update timestamp in xfs_ialloc manually
In xfs_ialloc we just want to set all timestamps to the current time. We
don't need to mark the inode dirty like xfs_ichgtime does, and we don't
need nor want the opimizations in xfs_ichgtime that I will introduce in
the next patch.

So just opencode the timestamp update in xfs_ialloc, and remove the new
unused XFS_ICHGTIME_ACC case in xfs_ichgtime.

SGI-PV: 981498

SGI-Modid: xfs-linux-melb:xfs-kern:31825a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13 16:44:15 +10:00
Christoph Hellwig 5ec7f8c7d1 [XFS] kill bhv_vnode_t
All remaining bhv_vnode_t instance are in code that's more or less Linux
specific. (Well, for xfs_acl.c that could be argued, but that code is on
the removal list, too). So just do an s/bhv_vnode_t/struct inode/ over the
whole tree. We can clean up variable naming and some useless helpers
later.

SGI-PV: 981498

SGI-Modid: xfs-linux-melb:xfs-kern:31781a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13 16:22:40 +10:00
Christoph Hellwig df80c933f9 [XFS] remove some easy bhv_vnode_t instances
In various places we can just move a VFS_I call into the argument list of
called functions/macros instead of having a local bhv_vnode_t.

SGI-PV: 981498

SGI-Modid: xfs-linux-melb:xfs-kern:31776a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13 16:22:09 +10:00
Christoph Hellwig e1cccd917b [XFS] kill xfs_lock_dir_and_entry
When multiple inodes are locked in XFS it happens in order of the inode
number, with the everything but the first inode trylocked if any of the
previous inodes is in the AIL.

Except for the sorting of the inodes this logic is implemented in
xfs_lock_inodes, but also partially duplicated in xfs_lock_dir_and_entry
in a particularly stupid way adds a lock roundtrip if the inode ordering
is not optimal.

This patch adds a new helper xfs_lock_two_inodes that takes two inodes and
locks them in the most optimal way according to the above locking protocol
and uses it for all places that want to lock two inodes.

The only caller of xfs_lock_inodes is xfs_rename which might lock up to
four inodes.

SGI-PV: 981498

SGI-Modid: xfs-linux-melb:xfs-kern:31772a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13 16:18:07 +10:00
Christoph Hellwig 863890cd90 [XFS] kill vn_to_inode
bhv_vnode_t is just a typedef for struct inode, so there's
no need for a helper to convert between the two.

SGI-PV: 981498

SGI-Modid: xfs-linux-melb:xfs-kern:31761a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13 16:12:05 +10:00
David Chinner e4f7529108 [XFS] Kill shouty XFS_ITOV() macro
Replace XFS_ITOV() with the new VFS_I() inline.

SGI-PV: 981498

SGI-Modid: xfs-linux-melb:xfs-kern:31724a

Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13 16:00:45 +10:00
David Chinner 705db4a24e [XFS] kill shouty XFS_ITOV_NULL macro
Replace XFS_ITOV_NULL() with the new VFS_I() inline.

SGI-PV: 981498

SGI-Modid: xfs-linux-melb:xfs-kern:31722a

Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13 15:47:43 +10:00
Christoph Hellwig f13fae2d2a [XFS] Remove vn_revalidate calls in xfs.
These days most of the attributes in struct inode are properly kept in
sync by XFS. This patch removes the need for vn_revalidate completely by:

- keeping inode.i_flags uptodate after any flags are updated in

xfs_ioctl_setattr

- keeping i_mode, i_uid and i_gid uptodate in xfs_setattr

SGI-PV: 984566

SGI-Modid: xfs-linux-melb:xfs-kern:31679a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-07-28 16:59:39 +10:00
Christoph Hellwig 0f285c8a1c [XFS] Now that xfs_setattr is only used for attributes set from ->setattr
it can be switched to take struct iattr directly and thus simplify the
implementation greatly. Also rename the ATTR_ flags to XFS_ATTR_ to not
conflict with the ATTR_ flags used by the VFS.

SGI-PV: 984565

SGI-Modid: xfs-linux-melb:xfs-kern:31678a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-07-28 16:59:37 +10:00
Christoph Hellwig 25fe55e814 [XFS] xfs_setattr currently doesn't just handle the attributes set through
->setattr but also addition XFS-specific attributes: project id, inode
flags and extent size hint. Having these in a single function makes it
more complicated and forces to have us a bhv_vattr intermediate structure
eating up stackspace.

This patch adds a new xfs_ioctl_setattr helper for the XFS ioctls that set
these attributes and remove the code to set them through xfs_setattr.

SGI-PV: 984564

SGI-Modid: xfs-linux-melb:xfs-kern:31677a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-07-28 16:59:36 +10:00
Christoph Hellwig 8f112e3bc3 [XFS] Merge xfs_rmdir into xfs_remove
xfs_remove and xfs_rmdir are almost the same with a little more work
performed in xfs_rmdir due to the . and .. entries. This patch merges
xfs_rmdir into xfs_remove and performs these actions conditionally.

Also clean up the error handling which was a nightmare in both versions
before.

SGI-PV: 981498

SGI-Modid: xfs-linux-melb:xfs-kern:31335a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Barry Naujok <bnaujok@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-07-28 16:58:58 +10:00
Lachlan McIlroy 7f871d5d1b [XFS] make inode reclaim wait for log I/O to complete
During a forced shutdown a xfs inode can be destroyed before log I/O
involving that inode is complete. We need to wait for the inode to be
unpinned before tearing it down. Version 2 cleans up the code a bit by
relying on xfs_iflush() to do the unpinning and forced shutdown check.

SGI-PV: 981240

SGI-Modid: xfs-linux-melb:xfs-kern:31326a

Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: David Chinner <dgc@sgi.com>
2008-07-28 16:58:54 +10:00
Barry Naujok 384f3ced07 [XFS] Return case-insensitive match for dentry cache
This implements the code to store the actual filename found during a
lookup in the dentry cache and to avoid multiple entries in the dcache
pointing to the same inode.

To avoid polluting the dcache, we implement a new directory inode
operations for lookup. xfs_vn_ci_lookup() stores the correct case name in
the dcache.

The "actual name" is only allocated and returned for a case- insensitive
match and not an actual match.

Another unusual interaction with the dcache is not storing negative
dentries like other filesystems doing a d_add(dentry, NULL) when an ENOENT
is returned. During the VFS lookup, if a dentry returned has no inode,
dput is called and ENOENT is returned. By not doing a d_add, this actually
removes it completely from the dcache to be reused. create/rename have to
be modified to support unhashed dentries being passed in.

SGI-PV: 981521
SGI-Modid: xfs-linux-melb:xfs-kern:31208a

Signed-off-by: Barry Naujok <bnaujok@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
2008-07-28 16:58:40 +10:00
Christoph Hellwig 61436febae [XFS] kill xfs_igrow_start and xfs_igrow_finish
xfs_igrow_start just expands to xfs_zero_eof with two asserts that are
useless in the context of the only caller and some rather confusing
comments.

xfs_igrow_finish is just a few lines of code decorated again with useless
asserts and confusing comments.

Just kill those two and merge them into xfs_setattr.

SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31186a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-07-28 16:58:18 +10:00
David Chinner 978b723712 [XFS] Fix fsync() b0rkage.
xfs_fsync() fails to wait for data I/O completion before checking if the
inode is dirty or clean to decide whether to log the inode or not. This
misses inode size updates when the data flushed by the fsync() is
extending the file.

Hence, like fdatasync(), we need to wait for I/o completion first, then
check the inode for cleanliness. Doing so makes the behaviour of
xfs_fsync() identical for fsync and fdatasync and we *always* use
synchronous semantics if the inode is dirty. Therefore also kill the
differences and remove the unused flags from the xfs_fsync function and
callers.

SGI-PV: 981296
SGI-Modid: xfs-linux-melb:xfs-kern:31033a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-05-23 15:25:25 +10:00
Christoph Hellwig 5df78e73d3 [XFS] kill usesless IHOLD calls in xfs_remove and xfs_rmdir
The VFS always has an inode reference when we call these functions. So we
only need to grab a signle reference to each inode that's joined to a
transaction - all the other bumping and dropping is as useless as the
comments describing the IRIX semantics.

SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30912a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-04-29 15:54:45 +10:00
Christoph Hellwig 82dab941a1 [XFS] kill parent == child checks in xfs_remove and xfs_rmdir
VFS guaranteed these can't happen.

SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30911a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-04-29 15:54:34 +10:00
Christoph Hellwig cfa853e47d [XFS] remove manual lookup from xfs_rename and simplify locking
->rename already gets the target inode passed if it exits. Pass it down to
xfs_rename so that we can avoid looking it up again. Also simplify locking
as the first lock section in xfs_rename can go away now: the isdir is an
invariant over the lifetime of the inode, and new_parent and the nlink
check are namespace topology protected by i_mutex in the VFS. The projid
check needs to move into the second lock section anyway to not be racy.

Also kill the now unused xfs_dir_lookup_int and remove the now-unused
first_locked argumet to xfs_lock_inodes.

SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30903a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-04-29 15:54:12 +10:00
Christoph Hellwig 579aa9caf5 [XFS] shrink mrlock_t
The writer field is not needed for non_DEBU builds so remove it. While
we're at i also clean up the interface for is locked asserts to go through
and xfs_iget.c helper with an interface like the xfs_ilock routines to
isolated the XFS codebase from mrlock internals. That way we can kill
mrlock_t entirely once rw_semaphores grow an islocked facility. Also
remove unused flags to the ilock family of functions.

SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30902a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-04-29 15:54:02 +10:00
Christoph Hellwig eca450b7c2 [XFS] simplify xfs_lookup
Opencode xfs-kill-xfs_dir_lookup_int here, which gets rid of a lock
roundtrip, and lots of stack space. Also kill the di_mode == 0 check that
has been done in xfs_iget for a few years now.

SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30901a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-04-29 15:53:52 +10:00
Christoph Hellwig d4377d8418 [XFS] xfs_rename: pass resblks to xfs_dir_removename
Similar to rmdir and remove - avoids a potential transaction reservation
overrun.

SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30900a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-04-29 15:53:41 +10:00
Christoph Hellwig 4e5dbb3498 [XFS] kill xfs_getattr
It's currently used by the ACL code to read di_mode/di_uid, but these are
simple 32bit scalar values we can just read directly without locking.

SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30897a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-04-29 15:53:16 +10:00
Christoph Hellwig 42173f6860 [XFS] Remove VN_IS* macros and related cruft.
We can just check i_mode / di_mode directly.

SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30896a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-04-29 15:53:05 +10:00
David Chinner 78e9da77f1 [XFS] Don't allow silent errors in xfs_inactive().
xfs_inactive() fails to report errors when committing the inactive
transaction. Hence we can get silent failures either finishing off the
truncation or committing the transaction. Even if we get errors, we need
to continue, so simply warn loudly to the system if we get errors here.

SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30830a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-04-18 12:01:58 +10:00
David Chinner d64e31a2f5 [XFS] Ensure errors from xfs_bdstrat() are correctly checked.
xfsbdstrat() is declared to return an error. That is never checked because
the error is propagated by the xfs_buf_t that is passed through the
function.

Mark xfsbdstrat() as returning void and comment the prototype on the
methods needed for error checking.

SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30823a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-04-18 12:00:24 +10:00
Barry Naujok 556b8b166c [XFS] remove bhv_vname_t and xfs_rename code
SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30804a

Signed-off-by: Barry Naujok <bnaujok@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-04-18 12:00:12 +10:00
David Chinner e5720eec05 [XFS] Propagate errors from xfs_trans_commit().
xfs_trans_commit() can return errors when there are problems in the
transaction subsystem. They are indicative that the entire transaction may
be incomplete, and hence the error should be propagated as there is a good
possibility that there is something fatally wrong in the filesystem. Catch
and propagate or warn about commit errors in the places where they are
currently ignored.

SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30795a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-04-18 11:58:17 +10:00
Christoph Hellwig b6ddc4e6fe [XFS] Don't validate symlink target component length
This target component validation is not POSIX conformant and it is not
done by any other Linux filesystem so remove it from XFS.

SGI-PV: 980080
SGI-Modid: xfs-linux-melb:xfs-kern:30776a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-04-18 11:51:36 +10:00
Christoph Hellwig ef1f5e7ad3 [XFS] cleanup vnode use in xfs_lookup
SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30550a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-04-18 11:40:55 +10:00
Christoph Hellwig 3937be5ba8 [XFS] cleanup vnode use in xfs_symlink and xfs_rename
SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30548a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-04-18 11:40:45 +10:00
Christoph Hellwig a3da789640 [XFS] cleanup vnode use in xfs_link
SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30547a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-04-18 11:40:35 +10:00
Christoph Hellwig 979ebab116 [XFS] cleanup vnode use in xfs_create/mknod/mkdir
SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30546a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-04-18 11:40:25 +10:00
Christoph Hellwig bc4ac74a4e [XFS] cleanup vnode use in dmapi calls
SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30545a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-04-18 11:40:15 +10:00
David Chinner 44d814ced4 [XFS] Update c/mtime correctly on truncates
XFS changes the c/mtime of an inode when truncating it to the same size.
The c/mtime is only supposed to change if the size is changed. Not to be
confused with ftruncate, where the c/mtime is supposed to be changed even
if the size is not changed.

The Linux VFS encodes this semantic difference in the flags it sends down
to ->setattr, which XFS currently ignores. We need to make XFS pay
attention to the VFS flags and hence Do The Right Thing.

SGI-PV: 977547
SGI-Modid: xfs-linux-melb:xfs-kern:30536a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-04-18 11:39:45 +10:00
Christoph Hellwig 126468b115 [XFS] kill xfs_rwlock/xfs_rwunlock
We can just use xfs_ilock/xfs_iunlock instead and get rid of the ugly
bhv_vrwlock_t.

SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30533a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-04-18 11:39:25 +10:00
Christoph Hellwig 43973964a3 [XFS] kill xfs_get_dir_entry
Instead of of xfs_get_dir_entry use a macro to get the xfs_inode from the
dentry in the callers and grab the reference manually.

Only grab the reference once as it's fine to keep it over the dmapi calls.
(And even that reference is actually superflous in Linux but I'll leave
that for another patch)

SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30531a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-04-18 11:39:14 +10:00
David Chinner 3354040897 [XFS] Use xfs_inode_clean() in more places
Remove open coded checks for the whether the inode is clean and replace
them with an inlined function.

SGI-PV: 977461
SGI-Modid: xfs-linux-melb:xfs-kern:30503a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-04-18 11:37:51 +10:00
David Chinner a3f74ffb6d [XFS] Don't block pdflush when writing back inodes
When pdflush is writing back inodes, it can get stuck on inode cluster
buffers that are currently under I/O. This occurs when we write data to
multiple inodes in the same inode cluster at the same time.

Effectively, delayed allocation marks the inode dirty during the data
writeback. Hence if the inode cluster was flushed during the writeback of
the first inode, the writeback of the second inode will block waiting for
the inode cluster write to complete before writing it again for the newly
dirtied inode.

Basically, we want to avoid this from happening so we don't block pdflush
and slow down all of writeback. Hence we introduce a non-blocking async
inode flush flag that pdflush uses. If this flag is set, we use
non-blocking operations (e.g. try locks) whereever we can to avoid
blocking or extra I/O being issued.

SGI-PV: 970925
SGI-Modid: xfs-linux-melb:xfs-kern:30501a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-04-18 11:37:32 +10:00
Lachlan McIlroy e9a56b7cda [XFS] Fix regression due to refcache removal
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:30490a

Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
2008-04-18 11:37:06 +10:00
Donald Douwsma 163d3686bb [XFS] Remove the xfs_refcache
Remove the xfs_refcache, it was only needed while we were still
building for 2.4 kernels.

SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:30472a

Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-04-18 11:36:55 +10:00
Lachlan McIlroy 461aa8a225 [XFS] make inode reclaim synchronise with xfs_iflush_done()
On a forced shutdown, xfs_finish_reclaim() will skip flushing the inode.
If the inode flush lock is not already held and there is an outstanding
xfs_iflush_done() then we might free the inode prematurely. By acquiring
and releasing the flush lock we will synchronise with xfs_iflush_done().

SGI-PV: 909874
SGI-Modid: xfs-linux-melb:xfs-kern:30468a

Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: David Chinner <dgc@sgi.com>
2008-04-18 11:34:54 +10:00
Eric Sandeen 6211870992 [XFS] remove shouting-indirection macros from xfs_sb.h
Remove macro-to-small-function indirection from xfs_sb.h, and remove some
which are completely unused.

SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30528a

Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-04-10 16:24:45 +10:00
Christoph Hellwig 222096ae7f [XFS] stop updating inode->i_blocks
The VFS doesn't use i_blocks, it's only used by generic_fillattr and the
generic quota code which XFS doesn't use. In XFS there is one use to check
whether we have an inline or out of line sumlink, but we can replace that
with a check of the XFS_IFINLINE inode flag.

SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:30391a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-02-07 18:23:15 +11:00
Christoph Hellwig 4576758db5 [XFS] use generic_permission
Now that all direct caller of xfs_iaccess are gone we can kill xfs_iaccess
and xfs_access and just use generic_permission with a check_acl callback.
This is required for the per-mount read-only patchset in -mm to work
properly with XFS.

SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:30370a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-02-07 18:22:38 +11:00
Christoph Hellwig 199037c598 [XFS] remove permission check from xfs_change_file_space
Both callers of xfs_change_file_space alreaedy do the file->f_mode &
FMODE_WRITE check to ensure we have a file descriptor that has been opened
for write mode, so there is no need to re-check that with xfs_iaccess.
Especially as the later might wrongly deny it for corner cases like file
descriptor passing through unix domain sockets.

SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:30365a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-02-07 18:21:14 +11:00
Christoph Hellwig f71354bc3a [XFS] Cleanup various fid related bits:
- merge xfs_fid2 into it's only caller xfs_dm_inode_to_fh.
- remove xfs_vget and opencode it in the two callers, simplifying
  both of them by avoiding the awkward calling convetion.
- assign directly to the dm_fid_t members in various places in the
  dmapi code instead of casting them to xfs_fid_t first (which
  is identical to dm_fid_t)

SGI-PV: 974747
SGI-Modid: xfs-linux-melb:xfs-kern:30258a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Vlad Apostolov <vapo@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-02-07 18:20:11 +11:00
Tim Shimmin e6a4b37f38 [XFS] Remove the BPCSHIFT and NB* based macros from XFS.
The BPCSHIFT based macros, btoc*, ctob*, offtoc* and ctooff are either not
used or don't need to be used. The NDPP, NDPP, NBBY macros don't need to
be used but instead are replaced directly by PAGE_SIZE and PAGE_CACHE_SIZE
where appropriate. Initial patch and motivation from Nicolas Kaiser.

SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:30096a

Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-02-07 18:17:58 +11:00
Eric Sandeen 71ddabb94a [XFS] optimize XFS_IS_REALTIME_INODE w/o realtime config
Use XFS_IS_REALTIME_INODE in more places, and #define it to 0 if
CONFIG_XFS_RT is off. This should be safe because mount checks in
xfs_rtmount_init:

so if we get mounted w/o CONFIG_XFS_RT, no realtime inodes should be
encountered after that.

Defining XFS_IS_REALTIME_INODE to 0 saves a bit of stack space,
presumeably gcc can optimize around the various "if (0)" type checks:

xfs_alloc_file_space -8 xfs_bmap_adjacent -16 xfs_bmapi -8
xfs_bmap_rtalloc -16 xfs_bunmapi -28 xfs_free_file_space -64 xfs_imap +8
<-- ? hmm. xfs_iomap_write_direct -12 xfs_qm_dqusage_adjust -4
xfs_qm_vop_chown_reserve -4

SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:30014a

Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-02-07 18:16:43 +11:00
Christoph Hellwig 613d70436c [XFS] kill xfs_iocore_t
xfs_iocore_t is a structure embedded in xfs_inode. Except for one field it
just duplicates fields already in xfs_inode, and there is nothing this
abstraction buys us on XFS/Linux. This patch removes it and shrinks source
and binary size of xfs aswell as shrinking the size of xfs_inode by 60/44
bytes in debug/non-debug builds.

SGI-PV: 970852
SGI-Modid: xfs-linux-melb:xfs-kern:29754a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2008-02-07 16:48:58 +11:00
Eric Sandeen c8b5ea289f [XFS] Unwrap GRANT_LOCK.
Un-obfuscate GRANT_LOCK, remove GRANT_LOCK->mutex_lock->spin_lock macros,
call spin_lock directly, remove extraneous cookie holdover from old xfs
code, and change lock type to spinlock_t.

SGI-PV: 970382
SGI-Modid: xfs-linux-melb:xfs-kern:29741a

Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2008-02-07 16:44:41 +11:00
Lachlan McIlroy 541d7d3c4b [XFS] kill unnessecary ioops indirection
Currently there is an indirection called ioops in the XFS data I/O path.
Various functions are called by functions pointers, but there is no
coherence in what this is for, and of course for XFS itself it's entirely
unused. This patch removes it instead and significantly reduces source and
binary size of XFS while making maintaince easier.

SGI-PV: 970841
SGI-Modid: xfs-linux-melb:xfs-kern:29737a

Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2008-02-07 16:44:14 +11:00
Lachlan McIlroy cf441eeb79 [XFS] clean up vnode/inode tracing
Simplify vnode tracing calls by embedding function name & return addr in
the calling macro.

Also do a lot of vnode->inode renaming for consistency, while we're at it.

SGI-PV: 970335
SGI-Modid: xfs-linux-melb:xfs-kern:29650a

Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2008-02-07 16:42:19 +11:00
Christoph Hellwig c6143911a7 [XFS] cleanup fid types mess
Currently XFs has three different fid types: struct fid, struct xfs_fid
and struct xfs_fid2 with hte latter two beeing identicaly and the first
one beeing the same size but an unstructured array with the same size.

This patch consolidates all this to alway uuse struct xfs_fid.

This patch is required for an upcoming patch series from me that revamps
the nfs exporting code and introduces a Linux-wide struct fid.

SGI-PV: 970336
SGI-Modid: xfs-linux-melb:xfs-kern:29651a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-10-19 18:02:55 +10:00
Christoph Hellwig 3e5daf05a0 [XFS] simplify xfs_create/mknod/symlink prototype
Simplify the prototype for xfs_create/xfs_mkdir/xfs_symlink by not passing
down a bhv_vattr_t that just hogs stack space. Instead pass down the mode
in a mode_t and in case of xfs_create the rdev as a scalar type as well.

SGI-PV: 968563
SGI-Modid: xfs-linux-melb:xfs-kern:29794a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-10-16 14:15:32 +10:00
Christoph Hellwig bd186aa901 [XFS] kill the vfs_flags member in struct bhv_vfs
All flags are added to xfs_mount's m_flag instead. Note that the 32bit
inode flag was duplicated in both of them, but only cleared in the mount
when it was not nessecary due to the filesystem beeing small enough. Two
flags are still required here - one to indicate the mount option setting,
and one to indicate if it applies or not.

SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29507a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-10-16 11:45:57 +10:00
Christoph Hellwig 1543d79c45 [XFS] move v_trace from bhv_vnode to xfs_inode
struct bhv_vnode is on it's way out, so move the trace buffer to the XFS
inode. Note that this makes the tracing macros rather misnamed, but this
kind of fallout will be fixed up incrementally later on.

SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29498a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-10-16 11:39:25 +10:00
Christoph Hellwig b677c210ce [XFS] move v_iocount from bhv_vnode to xfs_inode
struct bhv_vnode is on it's way out, so move the I/O count to the XFS
inode.

SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29497a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-10-16 11:38:56 +10:00
Christoph Hellwig 09262b4339 [XFS] Create xfs_iflags_test_and_clear helper function
SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29496a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-10-16 11:38:36 +10:00
Christoph Hellwig b3aea4edc2 [XFS] kill the v_flag member in struct bhv_vnode
All flags previously handled at the vnode level are not in the xfs_inode
where we already have a flags mechanisms and free bits for flags
previously in the vnode.

SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29495a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-10-16 11:37:29 +10:00
Christoph Hellwig 2f6f7b3d9b [XFS] kill v_vfsp member from struct bhv_vnode
We can easily get at the vfsp through the super_block but it will soon be
gone anyway.

SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29494a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-10-16 11:23:43 +10:00
Christoph Hellwig 739bfb2a7d [XFS] call common xfs vnode-level helpers directly and remove vnode operations
SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29493a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-10-16 10:40:00 +10:00
Christoph Hellwig 993386c19a [XFS] decontaminate vnode operations from behavior details
All vnode ops now take struct xfs_inode pointers and the behaviour related
glue is split out into methods of it's own. This required fixing
xfs_create/mkdir/symlink to not mess with the inode pointer but rather use
a separate boolean for error handling. Thanks to Dave Chinner for that
fix.

SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29492a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-10-15 16:54:29 +10:00
David Chinner da353b0d64 [XFS] Radix tree based inode caching
One of the perpetual scaling problems XFS has is indexing it's incore
inodes. We currently uses hashes and the default hash sizes chosen can
only ever be a tradeoff between memory consumption and the maximum
realistic size of the cache.

As a result, anyone who has millions of inodes cached on a filesystem
needs to tunes the size of the cache via the ihashsize mount option to
allow decent scalability with inode cache operations.

A further problem is the separate inode cluster hash, whose size is based
on the ihashsize but is smaller, and so under certain conditions (sparse
cluster cache population) this can become a limitation long before the
inode hash is causing issues.

The following patchset removes the inode hash and cluster hash and
replaces them with radix trees to avoid the scalability limitations of the
hashes. It also reduces the size of the inodes by 3 pointers....

SGI-PV: 969561
SGI-Modid: xfs-linux-melb:xfs-kern:29481a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-10-15 16:50:50 +10:00
Christoph Hellwig 804c83c376 [XFS] stop using uio in the readlink code
Simplify the readlink code to get rid of the last user of uio.

SGI-PV: 968563
SGI-Modid: xfs-linux-melb:xfs-kern:29479a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-10-15 16:50:13 +10:00