mirror of https://gitee.com/openkylin/linux.git
882 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Linus Torvalds
|
0f002fddbe |
MIPS changes for v4.11
Miscellaneous:
- Add IRQ stacks
- Add cacheinfo support
- Add "uzImage.bin" zboot target
- Unify performance counter definitions
- Export various (mainly assembly) symbols alongside their
definitions
- Audit and remove unnecessary uses of module.h
kexec & kdump:
- Lots of improvements and fixes
- Add correct copy_regs implementations
- Add debug logging of new kernel information
Security:
- Use Makefile.postlink to insert relocations into vmlinux
- Provide plat_post_relocation hook (used for Octeon KASLR)
- Add support for tuning mmap randomisation
- Relocate DTB
microMIPS:
- A load of unwind fixes
- Add some missing .insn to fix link errors
MIPSr6:
- Fix MULTU/MADDU/MSUBU sign extension in r2 emulation
- Remove r2_emul_return and use ERETNC unconditionally on MIPSr6
- Allow pre-r6 emulation on SMP MIPSr6 kernels
Cache management:
- Treat physically indexed dcache as non-aliasing
- Add return errors to protected cache ops for KVM
- CM3: Ensure L1 & L2 cache ECC checking matches
- CM3: Indicate inclusive caches
- I6400: Treat dcache as physically indexed
Memory management:
- Ensure bootmem doesn't corrupt reserved memory
- Export some TLB exception generation functions for KVM
OF
- NULL check initial_boot_params before use in of_scan_flat_dt()
- Fix unaligned access in of_alias_scan()
SMP:
- CPS: Don't BUG if a CPU fails to start
Other fixes
- Fix longstanding 64-bit IP checksum carry bug
- Fix KERN_CONT fallout in cpu-bugs64.c and sync-r4k.c
- Update defconfigs for NF_CT_PROTO_DCCP, DPLITE,
CPU_FREQ_STAT,SCSI_DH changes
- Disable certain builtin compiler options, stack-check (whole
kernel), asynchronous-unwind-tables (VDSO).
- A bunch of build fixes from kernelci.org testing
- Various other minor cleanups & corrections
BMIPS:
- Migrate interrupts during bmips_cpu_disable
- BCM47xx: Add Luxul devices
- BCM47xx: Fix Asus WL-500W button inversion
- BCM7xxx: Add SPI device nodes
Generic (multiplatform):
- Add kexec DTB passing
- Fix big endian
- Add cpp_its_S in ksym_dep_filter to silence build warning
IP22:
- Reformat inline assembler code to modern standards
- Fix binutils 2.25 build error
IP27:
- Fix duplicate CAC_BASE definition build error
- Disable qlge driver to workaround broken compiler
Lantiq:
- Refresh defconfig and activate more drivers
- Lock DMA register access
- Fix cascading IRQ setup
- Fix build of VPE loader
- xway: Fix ethernet packet header corruption over reboot
Loongson1
- Add watchdog support
- 1B: Reduce DEFAULT_MEMSIZE to 64MB
- 1B: Change OSC clock name to match rest of kernel
- 1C: Remove ARCH_WANT_OPTIONAL_GPIOLIB
Octeon:
- Add KASLR support
- Support Octeon III USB controller
- Fix large copy_from_user corner case
- Enable devtmpfs in defconfig
Netlogic:
- Fix non-default XLR build error due to netlogic,xlp-pic code
- Fix assembler warning from smpboot.S
pic32mzda:
- Fix linker error when early printk is disabled
Pistachio:
- Add base device tree
- Add Ci40 "Marduk" device tree
Ralink:
- Support raw appended DTB
- Add missing I2C & I2S clocks
- Add missing pinmux and fix pinmux function name typo
- Add missing clk_round_rate()
- Clean up prom_init()
- MT7621: Set SoC type
- MT7621: Support highmem
TXx9:
- Modernize printing of kernel messages and resolve KERN_CONT fallout
- 7segled: use permission-specific DEVICE_ATTR variants
XilFPGA:
- Add IRQ controller and UART IRQ
- Add AXI I2C and emaclite to DT & defconfig
-----BEGIN PGP SIGNATURE-----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=maZx
-----END PGP SIGNATURE-----
Merge tag 'mips_4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips
Pull MIPS updates from James Hogan:
"Here's the main MIPS pull request for 4.11.
It contains a few new features such as IRQ stacks, cacheinfo support,
and KASLR for Octeon CPUs, and a variety of smaller improvements and
fixes including devicetree additions, kexec cleanups, microMIPS stack
unwinding fixes, and a bunch of build fixes to clean up continuous
integration builds.
Its all been in linux-next for at least a couple of days, most of it
far longer.
Miscellaneous:
- Add IRQ stacks
- Add cacheinfo support
- Add "uzImage.bin" zboot target
- Unify performance counter definitions
- Export various (mainly assembly) symbols alongside their
definitions
- Audit and remove unnecessary uses of module.h
kexec & kdump:
- Lots of improvements and fixes
- Add correct copy_regs implementations
- Add debug logging of new kernel information
Security:
- Use Makefile.postlink to insert relocations into vmlinux
- Provide plat_post_relocation hook (used for Octeon KASLR)
- Add support for tuning mmap randomisation
- Relocate DTB
microMIPS:
- A load of unwind fixes
- Add some missing .insn to fix link errors
MIPSr6:
- Fix MULTU/MADDU/MSUBU sign extension in r2 emulation
- Remove r2_emul_return and use ERETNC unconditionally on MIPSr6
- Allow pre-r6 emulation on SMP MIPSr6 kernels
Cache management:
- Treat physically indexed dcache as non-aliasing
- Add return errors to protected cache ops for KVM
- CM3: Ensure L1 & L2 cache ECC checking matches
- CM3: Indicate inclusive caches
- I6400: Treat dcache as physically indexed
Memory management:
- Ensure bootmem doesn't corrupt reserved memory
- Export some TLB exception generation functions for KVM
OF:
- NULL check initial_boot_params before use in of_scan_flat_dt()
- Fix unaligned access in of_alias_scan()
SMP:
- CPS: Don't BUG if a CPU fails to start
Other fixes:
- Fix longstanding 64-bit IP checksum carry bug
- Fix KERN_CONT fallout in cpu-bugs64.c and sync-r4k.c
- Update defconfigs for NF_CT_PROTO_DCCP, DPLITE,
CPU_FREQ_STAT,SCSI_DH changes
- Disable certain builtin compiler options, stack-check (whole
kernel), asynchronous-unwind-tables (VDSO).
- A bunch of build fixes from kernelci.org testing
- Various other minor cleanups & corrections
BMIPS:
- Migrate interrupts during bmips_cpu_disable
- BCM47xx: Add Luxul devices
- BCM47xx: Fix Asus WL-500W button inversion
- BCM7xxx: Add SPI device nodes
Generic (multiplatform):
- Add kexec DTB passing
- Fix big endian
- Add cpp_its_S in ksym_dep_filter to silence build warning
IP22:
- Reformat inline assembler code to modern standards
- Fix binutils 2.25 build error
IP27:
- Fix duplicate CAC_BASE definition build error
- Disable qlge driver to workaround broken compiler
Lantiq:
- Refresh defconfig and activate more drivers
- Lock DMA register access
- Fix cascading IRQ setup
- Fix build of VPE loader
- xway: Fix ethernet packet header corruption over reboot
Loongson1
- Add watchdog support
- 1B: Reduce DEFAULT_MEMSIZE to 64MB
- 1B: Change OSC clock name to match rest of kernel
- 1C: Remove ARCH_WANT_OPTIONAL_GPIOLIB
Octeon:
- Add KASLR support
- Support Octeon III USB controller
- Fix large copy_from_user corner case
- Enable devtmpfs in defconfig
Netlogic:
- Fix non-default XLR build error due to netlogic,xlp-pic code
- Fix assembler warning from smpboot.S
pic32mzda:
- Fix linker error when early printk is disabled
Pistachio:
- Add base device tree
- Add Ci40 "Marduk" device tree
Ralink:
- Support raw appended DTB
- Add missing I2C & I2S clocks
- Add missing pinmux and fix pinmux function name typo
- Add missing clk_round_rate()
- Clean up prom_init()
- MT7621: Set SoC type
- MT7621: Support highmem
TXx9:
- Modernize printing of kernel messages and resolve KERN_CONT fallout
- 7segled: use permission-specific DEVICE_ATTR variants
XilFPGA:
- Add IRQ controller and UART IRQ
- Add AXI I2C and emaclite to DT & defconfig"
* tag 'mips_4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: (148 commits)
MIPS: VDSO: Explicitly use -fno-asynchronous-unwind-tables
MIPS: BCM47XX: Fix button inversion for Asus WL-500W
MIPS: DTS: Add img directory to Makefile
MIPS: ip27: Disable qlge driver in defconfig
MIPS: pic32mzda: Fix linker error for pic32_get_pbclk()
MIPS: Lantiq: Keep ethernet enabled during boot
MIPS: OCTEON: Fix copy_from_user fault handling for large buffers
MIPS: Fix special case in 64 bit IP checksumming.
MIPS: OCTEON: Enable DEVTMPFS
MIPS: lantiq: Set physical_memsize
MIPS: sysmips: Remove duplicated include from syscall.c
Kbuild: Add cpp_its_S in ksym_dep_filter
MIPS: Audit and remove any unnecessary uses of module.h
MIPS: Unify perf counter register definitions
MIPS: Disable stack checks on MIPS kernels
MIPS: OCTEON: Platform support for OCTEON III USB controller
MIPS: Lantiq: Fix cascaded IRQ setup
MIPS: sync-r4k: Fix KERN_CONT fallout
MIPS: IRQ Stack: Fix erroneous jal to plat_irq_dispatch
MIPS: Fix distclean with Makefile.postlink
...
|
|
|
Markus Mayer
|
a8d709b065 |
BMIPS: Enable prerequisites for CPUfreq in MIPS Kconfig.
Turn on CPU_SUPPORTS_CPUFREQ and MIPS_EXTERNAL_TIMER for BMIPS. Signed-off-by: Markus Mayer <mmayer@broadcom.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
|
|
Matt Redfearn
|
a3078e593b |
MIPS: Generic: Fix big endian CPUs on generic machine
Big endian CPUs require SWAP_IO_SPACE enabled to swap accesses to little
endian peripherals.
Without this patch, big endian kernels fail to communicate with little
endian periperals, such as PCI devices, on QEMU and FPGA based
platforms.
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Fixes:
|
|
|
Marcin Nowakowski
|
bff323d565 |
MIPS: Kconfig: Fix indentation for kexec-related entries
Kconfig entries are not aligned properly, so remove incorrect whitespace. Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14631/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> |
|
|
Matt Redfearn
|
109c32ffd8 |
MIPS: Add support for ARCH_MMAP_RND_{COMPAT_}BITS
arch_mmap_rnd() uses hard-coded limits of 16MB for the randomisation of mmap within 32bit processes and 256MB in 64bit processes. Since v4.4 other arches support tuning this value in /proc/sys/vm/mmap_rnd_bits. Add support for this to MIPS. Set the minimum(default) number of bits randomisation for 32bit to 8 - which with 4k pagesize is unchanged from the current 16MB total randomness. The minimum(default) for 64bit is 12bits, again with 4k pagesize this is the same as the current 256MB. This patch is necessary for MIPS32 to pass the Android CTS tests, with the number of random bits set to 15. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Daniel Cashman <dcashman@android.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-mips@linux-mips.org Cc: kernel-hardening@lists.openwall.com Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14617/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> |
|
|
Paul Burton
|
9eaa9a82e5 |
MIPS: Allow pre-r6 emulation on SMP MIPSr6 kernels
There's no reason for the pre-r6 instruction emulation code to be limited to uniprocessor kernels. We already emulate atomic memory access instructions in a way that works for SMP systems, and nothing else should be affected. Remove the artificial limitation, allowing pre-r6 instruction emulation to be used with SMP kernels. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14410/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> |
|
|
Kelvin Cheung
|
c11621256c |
MIPS: Loongson1C: Remove ARCH_WANT_OPTIONAL_GPIOLIB
This patch removes ARCH_WANT_OPTIONAL_GPIOLIB due to upstream changes. Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Yang Ling <gnaygnil@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13855/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> |
|
|
Zubair Lutfullah Kakakhel
|
79a9329533 |
MIPS: xilfpga: Use Xilinx Interrupt Controller
IRQs from peripherals such as i2c/uart/ethernet come via the AXI Interrupt controller. Select it in Kconfig for xilfpga and add the DT node Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14592/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> |
|
|
Steven J. Hill
|
3ff72be4c9 |
MIPS: Octeon: Enable KASLR
This patch enables KASLR for Octeon systems. The SMP startup code is such that the secondaries monitor the volatile variable 'octeon_processor_relocated_kernel_entry' for any non-zero value. The 'plat_post_relocation hook' is used to set that value to the kernel entry point of the relocated kernel. The secondary CPUs will then jusmp to the new kernel, perform their initialization again and begin waiting for the boot CPU to start them via the relocated loop 'octeon_spin_wait_boot'. Inspired by Steven's code from Cavium. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Signed-off-by: Steven J. Hill <steven.hill@cavium.com> Acked-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14669/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> |
|
|
Matt Redfearn
|
3cc3434fd6 |
MIPS: Select HAVE_IRQ_EXIT_ON_IRQ_STACK
Since do_IRQ is now invoked on a separate IRQ stack, we select HAVE_IRQ_EXIT_ON_IRQ_STACK so that softirq's may be invoked directly from irq_exit(), rather than requiring do_softirq_own_stack. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Acked-by: Jason A. Donenfeld <jason@zx2c4.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14744/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> |
|
|
Linus Torvalds
|
133d970e0d |
Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS updates from Ralf Baechle: "This is the main MIPS pull request for 4.9: MIPS core arch code: - traps: 64bit kernels should read CP0_EBase 64bit - traps: Convert ebase to KSEG0 - c-r4k: Drop bc_wback_inv() from icache flush - c-r4k: Split user/kernel flush_icache_range() - cacheflush: Use __flush_icache_user_range() - uprobes: Flush icache via kernel address - KVM: Use __local_flush_icache_user_range() - c-r4k: Fix flush_icache_range() for EVA - Fix -mabi=64 build of vdso.lds - VDSO: Drop duplicated -I*/-E* aflags - tracing: move insn_has_delay_slot to a shared header - tracing: disable uprobe/kprobe on compact branch instructions - ptrace: Fix regs_return_value for kernel context - Squash lines for simple wrapper functions - Move identification of VP(E) into proc.c from smp-mt.c - Add definitions of SYNC barrierstype values - traps: Ensure full EBase is written - tlb-r4k: If there are wired entries, don't use TLBINVF - Sanitise coherentio semantics - dma-default: Don't check hw_coherentio if device is non-coherent - Support per-device DMA coherence - Adjust MIPS64 CAC_BASE to reflect Config.K0 - Support generating Flattened Image Trees (.itb) - generic: Introduce generic DT-based board support - generic: Convert SEAD-3 to a generic board - Enable hardened usercopy - Don't specify STACKPROTECTOR in defconfigs Octeon: - Delete dead code and files across the platform. - Change to use all memory into use by default. - Rename upper case variables in setup code to lowercase. - Delete legacy hack for broken bootloaders. - Leave maintaining the link state to the actual ethernet/PHY drivers. - Add DTS for D-Link DSR-500N. - Fix PCI interrupt routing on D-Link DSR-500N. Pistachio: - Remove ANDROID_TIMED_OUTPUT from defconfig TX39xx: - Move GPIO setup from .mem_setup() to .arch_init() - Convert to Common Clock Framework TX49xx: - Move GPIO setup from .mem_setup() to .arch_init() - Convert to Common Clock Framework txx9wdt: - Add missing clock (un)prepare calls for CCF BMIPS: - Add PW, GPIO SDHCI and NAND device node names - Support APPENDED_DTB - Add missing bcm97435svmb to DT_NONE - Rename bcm96358nb4ser to bcm6358-neufbox4-sercom - Add DT examples for BCM63268, BCM3368 and BCM6362 - Add support for BCM3368 and BCM6362 PCI - Reduce stack frame usage - Use struct list_head lists - Support for CONFIG_PCI_DOMAINS_GENERIC - Make pcibios_set_cache_line_size an initcall - Inline pcibios_assign_all_busses - Split pci.c into pci.c & pci-legacy.c - Introduce CONFIG_PCI_DRIVERS_LEGACY - Support generic drivers CPC - Convert bare 'unsigned' to 'unsigned int' - Avoid lock when MIPS CM >= 3 is present GIC: - Delete unused file smp-gic.c mt7620: - Delete unnecessary assignment for the field "owner" from PCI BCM63xx: - Let clk_disable() return immediately if clk is NULL pm-cps: - Change FSB workaround to CPU blacklist - Update comments on barrier instructions - Use MIPS standard lightweight ordering barrier - Use MIPS standard completion barrier - Remove selection of sync types - Add MIPSr6 CPU support - Support CM3 changes to Coherence Enable Register SMP: - Wrap call to mips_cpc_lock_other in mips_cm_lock_other - Introduce mechanism for freeing and allocating IPIs cpuidle: - cpuidle-cps: Enable use with MIPSr6 CPUs. SEAD3: - Rewrite to use DT and generic kernel feature. USB: - host: ehci-sead3: Remove SEAD-3 EHCI code FBDEV: - cobalt_lcdfb: Drop SEAD3 support dt-bindings: - Document a binding for simple ASCII LCDs auxdisplay: - img-ascii-lcd: driver for simple ASCII LCD displays irqchip i8259: - i8259: Add domain before mapping parent irq - i8259: Allow platforms to override poll function - i8259: Remove unused i8259A_irq_pending Malta: - Rewrite to use DT of/platform: - Probe "isa" busses by default CM: - Print CM error reports upon bus errors Module: - Migrate exception table users off module.h and onto extable.h - Make various drivers explicitly non-modular: - Audit and remove any unnecessary uses of module.h mailmap: - Canonicalize to Qais' current email address. Documentation: - MIPS supports HAVE_REGS_AND_STACK_ACCESS_API Loongson1C: - Add CPU support for Loongson1C - Add board support - Add defconfig - Add RTC support for Loongson1C board All this except one Documentation fix has sat in linux-next and has survived Imagination's automated build test system" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (127 commits) Documentation: MIPS supports HAVE_REGS_AND_STACK_ACCESS_API MIPS: ptrace: Fix regs_return_value for kernel context MIPS: VDSO: Drop duplicated -I*/-E* aflags MIPS: Fix -mabi=64 build of vdso.lds MIPS: Enable hardened usercopy MIPS: generic: Convert SEAD-3 to a generic board MIPS: generic: Introduce generic DT-based board support MIPS: Support generating Flattened Image Trees (.itb) MIPS: Adjust MIPS64 CAC_BASE to reflect Config.K0 MIPS: Print CM error reports upon bus errors MIPS: Support per-device DMA coherence MIPS: dma-default: Don't check hw_coherentio if device is non-coherent MIPS: Sanitise coherentio semantics MIPS: PCI: Support generic drivers MIPS: PCI: Introduce CONFIG_PCI_DRIVERS_LEGACY MIPS: PCI: Split pci.c into pci.c & pci-legacy.c MIPS: PCI: Inline pcibios_assign_all_busses MIPS: PCI: Make pcibios_set_cache_line_size an initcall MIPS: PCI: Support for CONFIG_PCI_DOMAINS_GENERIC MIPS: PCI: Use struct list_head lists ... |
|
|
Paul Burton
|
cabca8c098 |
MIPS: Enable hardened usercopy
Enable CONFIG_HARDENED_USERCOPY checks for MIPS, calling check_object
size in all of copy_{to,from}_user(), __copy_{to,from}_user() &
__copy_{to,from}_user_inatomic().
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14371/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
|
Vineet Gupta
|
51a021244b |
atomic64: no need for CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
This came to light when implementing native 64-bit atomics for ARCv2. The atomic64 self-test code uses CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE to check whether atomic64_dec_if_positive() is available. It seems it was needed when not every arch defined it. However as of current code the Kconfig option seems needless - for CONFIG_GENERIC_ATOMIC64 it is auto-enabled in lib/Kconfig and a generic definition of API is present lib/atomic64.c - arches with native 64-bit atomics select it in arch/*/Kconfig and define the API in their headers So I see no point in keeping the Kconfig option Compile tested for: - blackfin (CONFIG_GENERIC_ATOMIC64) - x86 (!CONFIG_GENERIC_ATOMIC64) - ia64 Link: http://lkml.kernel.org/r/1473703083-8625-3-git-send-email-vgupta@synopsys.com Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Zhaoxiu Zeng <zhaoxiu.zeng@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Ming Lin <ming.l@ssi.samsung.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@suse.de> Cc: Andi Kleen <ak@linux.intel.com> Cc: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Paul Burton
|
3f5f0a4475 |
MIPS: generic: Convert SEAD-3 to a generic board
Convert the MIPS SEAD-3 board support to be a generic board, supported by generic kernels. Because the SEAD-3 boot protocol was defined long ago and we don't want to force a switch to the UHI protocol, SEAD-3 is added as a legacy board which is detected by reading the REVISION register. This may technically not be a valid memory read & future work will include attempting to handle that gracefully. In practice since SEAD-3 is the only legacy board supported by the generic kernel so far the read will only happen on SEAD-3 boards, and even once Malta is converted the same REVISION register exists there too. Other boards such as Boston, Ci20 & Ci40 will use the UHI boot protocol & thus not run any of the legacy board detect functions. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14354/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> |
|
|
Paul Burton
|
eed0eabd12 |
MIPS: generic: Introduce generic DT-based board support
Introduce a "generic" platform, which aims to be board-agnostic by making use of device trees passed by the boot protocol defined in the MIPS UHI (Universal Hosting Interface) specification. Provision is made for supporting boards which use a legacy boot protocol that can't be changed, but adding support for such boards or any others is left to followon patches. Right now the built kernels expect to be loaded to 0x80100000, ie. in kseg0. This is fine for the vast majority of MIPS platforms, but nevertheless it would be good to remove this limitation in the future by mapping the kernel via the TLB such that it can be loaded anywhere & map itself appropriately. Configuration is handled by dynamically generating configs using scripts/kconfig/merge_config.sh, somewhat similar to the way powerpc makes use of it. This allows for variations upon the configuration, eg. differing architecture revisions or subsets of driver support for differing boards, to be handled without having a large number of defconfig files. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14353/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> |
|
|
Paul Burton
|
20d330645c |
MIPS: Support per-device DMA coherence
On some MIPS systems, a subset of devices may have DMA coherent with CPU caches. For example in systems including a MIPS I/O Coherence Unit (IOCU), some devices may be connected to that IOCU whilst others are not. Prior to this patch, we have a plat_device_is_coherent() function but no implementation which does anything besides return a global true or false, optionally chosen at runtime. For devices such as those described above this is insufficient. Fix this by tracking DMA coherence on a per-device basis with a dma_coherent field in struct dev_archdata. Setting this from arch_setup_dma_ops() takes care of devices which set the dma-coherent property via device tree, and any PCI devices beneath a bridge described in DT, automatically. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14349/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> |
|
|
Paul Burton
|
87dd9a4de4 |
MIPS: PCI: Support generic drivers
Introduce support for PCI drivers using only functionality provided generically by the PCI subsystem, by adding the minimum arch-provided functions required. The driver this has been developed for & tested with the xilinx-pcie on a MIPS Boston development board. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14346/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> |
|
|
Paul Burton
|
c5611df968 |
MIPS: PCI: Introduce CONFIG_PCI_DRIVERS_LEGACY
Introduce 2 Kconfig symbols, CONFIG_PCI_DRIVERS_GENERIC & CONFIG_PCI_DRIVERS_LEGACY, which indicate whether the system should be built to for PCI drivers using the MIPS-specific struct pci_controller API (hereafter "legacy" drivers) or more generic drivers using only functionality provided by the PCI core (hereafter "generic" drivers). The Kconfig entries are created such that platforms have to select CONFIG_PCI_DRIVERS_GENERIC if they wish to use it - that is, the default is CONFIG_PCI_DRIVERS_LEGACY so that existing platforms need no modification. The functions declared in pci.h are rearranged with those provided only by pci-legacy.c being guarded by an #ifdef CONFIG_PCI_DRIVERS_LEGACY to ensure they are only used in configurations where they are implemented. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14345/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> |
|
|
Paul Burton
|
88555b4819 |
MIPS: PCI: Support for CONFIG_PCI_DOMAINS_GENERIC
Introduce support for CONFIG_PCI_DOMAINS_GENERIC, allowing for platforms to make use of generic PCI domains instead of the MIPS-specific implementation. The set_pci_need_domain_info function is introduced to abstract away the removed need_domain_info field in struct pci_controller, and pcibios_scanbus is adjusted to use the pci_domain_nr accessor instead of directly accessing the index field. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14341/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> |
|
|
Paul Burton
|
38ec82fe21 |
MIPS: Malta: Probe interrupt controllers via DT
Probe the CPU, GIC & i8259 interrupt controllers present in the Malta system using device tree. This enables interrupts to be provided to devices using device tree as they are moved over to being probed using it. Since Malta is very configurable it's unknown whether a GIC will be present at compile time. In order to support both cases the malta_dt_shim code is added in order to detect whether a GIC is present, adjusting the DT to route interrupts correctly and nop out the GIC node if no GIC is found. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Kees Cook <keescook@chromium.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14274/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> |
|
|
Paul Burton
|
53f37d1d30 |
MIPS: SEAD3: Use generic ns16550a earlycon support
Stop selecting SYS_HAS_EARLY_PRINTK & remove the custom support for early output to the ns16550a UARTs, instead relying upon generic ns16550a earlycon support. This reduces the amount of platform code required for SEAD3 without losing any functionality. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Jacek Anaszewski <j.anaszewski@samsung.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14049/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> |
|
|
Yang Ling
|
12e3280b33 |
MIPS: Loongson1C: Add board support
Adds basic platform devices for Loongson1C, including serial port and ethernet. Signed-off-by: Yang Ling <gnaygnil@gmail.com> Cc: keguang.zhang@gmail.com Cc: chenhc@lemote.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13304/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> |
|
|
Marcin Nowakowski
|
08bccf4362 |
MIPS: Select HAVE_REGS_AND_STACK_ACCESS_API
Add lost Kconfig symbol. This should have been part of |
|
|
Linus Torvalds
|
4305f42401 |
Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS updates from Ralf Baechle:
"This is the main pull request for MIPS for 4.8. Also includes is a
minor SSB cleanup as SSB code traditionally is merged through the MIPS
tree:
ATH25:
- MIPS: Add default configuration for ath25
Boot:
- For zboot, copy appended dtb to the end of the kernel
- store the appended dtb address in a variable
BPF:
- Fix off by one error in offset allocation
Cobalt code:
- Fix typos
Core code:
- debugfs_create_file returns NULL on error, so don't use IS_ERR for
testing for errors.
- Fix double locking issue in RM7000 S-cache code. This would only
affect RM7000 ARC systems on reboot.
- Fix page table corruption on THP permission changes.
- Use compat_sys_keyctl for 32 bit userspace on 64 bit kernels.
David says, there are no compatibility issues raised by this fix.
- Move some signal code around.
- Rewrite r4k count/compare clockevent device registration such that
min_delta_ticks/max_delta_ticks files are guaranteed to be
initialized.
- Only register r4k count/compare as clockevent device if we can
assume the clock to be constant.
- Fix MSA asm warnings in control reg accessors
- uasm and tlbex fixes and tweaking.
- Print segment physical address when EU=1.
- Define AT_VECTOR_SIZE_ARCH for ARCH_DLINFO.
- CP: Allow booting by VP other than VP 0
- Cache handling fixes and optimizations for r4k class caches
- Add hotplug support for R6 processors
- Cleanup hotplug bits in kconfig
- traps: return correct si code for accessing nonmapped addresses
- Remove cpu_has_safe_index_cacheops
Lantiq:
- Register IRQ handler for virtual IRQ number
- Fix EIU interrupt loading code
- Use the real EXIN count
- Fix build error.
Loongson 3:
- Increase HPET_MIN_PROG_DELTA and decrease HPET_MIN_CYCLES
Octeon:
- Delete built-in DTB pruning code for D-Link DSR-1000N.
- Clean up GPIO definitions in dlink_dsr-1000n.dts.
- Add more LEDs to the DSR-100n DTS
- Fix off by one in octeon_irq_gpio_map()
- Typo fixes
- Enable SATA by default in cavium_octeon_defconfig
- Support readq/writeq()
- Remove forced mappings of USB interrupts.
- Ensure DMA descriptors are always in the low 4GB
- Improve USB reset code for OCTEON II.
Pistachio:
- Add maintainers entry for pistachio SoC Support
- Remove plat_setup_iocoherency
Ralink:
- Fix pwm UART in spis group pinmux.
SSB:
- Change bare unsigned to unsigned int to suit coding style
Tools:
- Fix reloc tool compiler warnings.
Other:
- Delete use of ARCH_WANT_OPTIONAL_GPIOLIB"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (61 commits)
MIPS: mm: Fix definition of R6 cache instruction
MIPS: tools: Fix relocs tool compiler warnings
MIPS: Cobalt: Fix typo
MIPS: Octeon: Fix typo
MIPS: Lantiq: Fix build failure
MIPS: Use CPHYSADDR to implement mips32 __pa
MIPS: Octeon: Dlink_dsr-1000n.dts: add more leds.
MIPS: Octeon: Clean up GPIO definitions in dlink_dsr-1000n.dts.
MIPS: Octeon: Delete built-in DTB pruning code for D-Link DSR-1000N.
MIPS: store the appended dtb address in a variable
MIPS: ZBOOT: copy appended dtb to the end of the kernel
MIPS: ralink: fix spis group pinmux
MIPS: Factor o32 specific code into signal_o32.c
MIPS: non-exec stack & heap when non-exec PT_GNU_STACK is present
MIPS: Use per-mm page to execute branch delay slot instructions
MIPS: Modify error handling
MIPS: c-r4k: Use SMP calls for CM indexed cache ops
MIPS: c-r4k: Avoid small flush_icache_range SMP calls
MIPS: c-r4k: Local flush_icache_range cache op override
MIPS: c-r4k: Split r4k_flush_kernel_vmap_range()
...
|
|
|
Jonas Gorski
|
b8f54f2cde |
MIPS: ZBOOT: copy appended dtb to the end of the kernel
Instead of rewriting the arguments, just move the appended dtb to where the decompressed kernel expects it. This eliminates the need for special casing vmlinuz.bin appended dtb files. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: John Crispin <john@phrozen.org> Cc: Paul Burton <paul.burton@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Alban Bedel <albeu@free.fr> Cc: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> Cc: Antony Pavlov <antonynpavlov@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13698/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> |
|
|
Paul Burton
|
432c6bacbd |
MIPS: Use per-mm page to execute branch delay slot instructions
In some cases the kernel needs to execute an instruction from the delay
slot of an emulated branch instruction. These cases include:
- Emulated floating point branch instructions (bc1[ft]l?) for systems
which don't include an FPU, or upon which the kernel is run with the
"nofpu" parameter.
- MIPSr6 systems running binaries targeting older revisions of the
architecture, which may include branch instructions whose encodings
are no longer valid in MIPSr6.
Executing instructions from such delay slots is done by writing the
instruction to memory followed by a trap, as part of an "emuframe", and
executing it. This avoids the requirement of an emulator for the entire
MIPS instruction set. Prior to this patch such emuframes are written to
the user stack and executed from there.
This patch moves FP branch delay emuframes off of the user stack and
into a per-mm page. Allocating a page per-mm leaves userland with access
to only what it had access to previously, and compared to other
solutions is relatively simple.
When a thread requires a delay slot emulation, it is allocated a frame.
A thread may only have one frame allocated at any one time, since it may
only ever be executing one instruction at any one time. In order to
ensure that we can free up allocated frame later, its index is recorded
in struct thread_struct. In the typical case, after executing the delay
slot instruction we'll execute a break instruction with the BRK_MEMU
code. This traps back to the kernel & leads to a call to do_dsemulret
which frees the allocated frame & moves the user PC back to the
instruction that would have executed following the emulated branch.
In some cases the delay slot instruction may be invalid, such as a
branch, or may trigger an exception. In these cases the BRK_MEMU break
instruction will not be hit. In order to ensure that frames are freed
this patch introduces dsemul_thread_cleanup() and calls it to free any
allocated frame upon thread exit. If the instruction generated an
exception & leads to a signal being delivered to the thread, or indeed
if a signal simply happens to be delivered to the thread whilst it is
executing from the struct emuframe, then we need to take care to exit
the frame appropriately. This is done by either rolling back the user PC
to the branch or advancing it to the continuation PC prior to signal
delivery, using dsemul_thread_rollback(). If this were not done then a
sigreturn would return to the struct emuframe, and if that frame had
meanwhile been used in response to an emulated branch instruction within
the signal handler then we would execute the wrong user code.
Whilst a user could theoretically place something like a compact branch
to self in a delay slot and cause their thread to become stuck in an
infinite loop with the frame never being deallocated, this would:
- Only affect the users single process.
- Be architecturally invalid since there would be a branch in the
delay slot, which is forbidden.
- Be extremely unlikely to happen by mistake, and provide a program
with no more ability to harm the system than a simple infinite loop
would.
If a thread requires a delay slot emulation & no frame is available to
it (ie. the process has enough other threads that all frames are
currently in use) then the thread joins a waitqueue. It will sleep until
a frame is freed by another thread in the process.
Since we now know whether a thread has an allocated frame due to our
tracking of its index, the cookie field of struct emuframe is removed as
we can be more certain whether we have a valid frame. Since a thread may
only ever have a single frame at any given time, the epc field of struct
emuframe is also removed & the PC to continue from is instead stored in
struct thread_struct. Together these changes simplify & shrink struct
emuframe somewhat, allowing twice as many frames to fit into the page
allocated for them.
The primary benefit of this patch is that we are now free to mark the
user stack non-executable where that is possible.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com>
Cc: Maciej Rozycki <maciej.rozycki@imgtec.com>
Cc: Faraz Shahbazker <faraz.shahbazker@imgtec.com>
Cc: Raghu Gandham <raghu.gandham@imgtec.com>
Cc: Matthew Fortune <matthew.fortune@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13764/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
|
James Hogan
|
40a2df4985 |
MIPS: Select HAVE_KVM for MIPS64_R{2,6}
We are now able to support KVM T&E with MIPS32 guests on some MIPS64r2 and MIPS64r6 hosts, so select HAVE_KVM so it can be enabled. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
|
|
Zubair Lutfullah Kakakhel
|
645c7827e6 |
MIPS: Pistachio: Remove plat_setup_iocoherency
The Pistachio SoC does not have an IOCU. Hence, DMA is non-coherent. Remove the function checking for iocoherency and select CONFIG_DMA_NONCOHERENT in Kconfig This code is probably accidentally inherited from Malta. Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Reviewed-by: James Hartley <james.hartley@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13433/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> |
|
|
Linus Walleij
|
666dc36764 |
MIPS: Delete use of ARCH_WANT_OPTIONAL_GPIOLIB
The Loongson1 added a new instance of ARCH_WANT_OPTIONAL_GPIOLIB which is no longer required to have GPIOLIB available in Kconfig. Delete it. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13543/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> |
|
|
Matt Redfearn
|
7840d6188b |
MIPS: Move CPU Hotplug config option into submenu
The KConfig option HOTPLUG_CPU should appear in the "Kernel Type" submenu. Relocate it to where SMP support is configured. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13751/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> |
|
|
Steven J. Hill
|
1685ddbe35 |
MIPS: Octeon: Changes to support readq()/writeq() usage.
Update OCTEON port mangling code to support readq() and writeq() functions to allow driver code to be more portable. Updates also for word and long function pairs. We also remove SWAP_IO_SPACE for OCTEON platforms as the function macros are redundant with the new mangling code. Signed-off-by: Steven J. Hill <steven.hill@cavium.com> Acked-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13780/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> |
|
|
Linus Torvalds
|
4029632c34 |
Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull more MIPS updates from Ralf Baechle:
"This is the secondnd batch of MIPS patches for 4.7. Summary:
CPS:
- Copy EVA configuration when starting secondary VPs.
EIC:
- Clear Status IPL.
Lasat:
- Fix a few off by one bugs.
lib:
- Mark intrinsics notrace. Not only are the intrinsics
uninteresting, it would cause infinite recursion.
MAINTAINERS:
- Add file patterns for MIPS BRCM device tree bindings.
- Add file patterns for mips device tree bindings.
MT7628:
- Fix MT7628 pinmux typos.
- wled_an pinmux gpio.
- EPHY LEDs pinmux support.
Pistachio:
- Enable KASLR
VDSO:
- Build microMIPS VDSO for microMIPS kernels.
- Fix aliasing warning by building with `-fno-strict-aliasing' for
debugging but also tracing them might result in recursion.
Misc:
- Add missing FROZEN hotplug notifier transitions.
- Fix clk binding example for varioius PIC32 devices.
- Fix cpu interrupt controller node-names in the DT files.
- Fix XPA CPU feature separation.
- Fix write_gc0_* macros when writing zero.
- Add inline asm encoding helpers.
- Add missing VZ accessor microMIPS encodings.
- Fix little endian microMIPS MSA encodings.
- Add 64-bit HTW fields and fix its configuration.
- Fix sigreturn via VDSO on microMIPS kernel.
- Lots of typo fixes.
- Add definitions of SegCtl registers and use them"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (49 commits)
MIPS: Add missing FROZEN hotplug notifier transitions
MIPS: Build microMIPS VDSO for microMIPS kernels
MIPS: Fix sigreturn via VDSO on microMIPS kernel
MIPS: devicetree: fix cpu interrupt controller node-names
MIPS: VDSO: Build with `-fno-strict-aliasing'
MIPS: Pistachio: Enable KASLR
MIPS: lib: Mark intrinsics notrace
MIPS: Fix 64-bit HTW configuration
MIPS: Add 64-bit HTW fields
MAINTAINERS: Add file patterns for mips device tree bindings
MAINTAINERS: Add file patterns for mips brcm device tree bindings
MIPS: Simplify DSP instruction encoding macros
MIPS: Add missing tlbinvf/XPA microMIPS encodings
MIPS: Fix little endian microMIPS MSA encodings
MIPS: Add missing VZ accessor microMIPS encodings
MIPS: Add inline asm encoding helpers
MIPS: Spelling fix lets -> let's
MIPS: VR41xx: Fix typo
MIPS: oprofile: Fix typo
MIPS: math-emu: Fix typo
...
|
|
|
Matt Redfearn
|
41cc07be42 |
MIPS: Pistachio: Enable KASLR
Allow KASLR to be selected on Pistachio based systems. Tested on a Creator Ci40. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Jonas Gorski <jogo@openwrt.org> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13356/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> |
|
|
Ralf Baechle
|
f43edca7ed |
ELF/MIPS build fix
CONFIG_MIPS32_N32=y but CONFIG_BINFMT_ELF disabled results in the following linker errors: arch/mips/built-in.o: In function `elf_core_dump': binfmt_elfn32.c:(.text+0x23dbc): undefined reference to `elf_core_extra_phdrs' binfmt_elfn32.c:(.text+0x246e4): undefined reference to `elf_core_extra_data_size' binfmt_elfn32.c:(.text+0x248d0): undefined reference to `elf_core_write_extra_phdrs' binfmt_elfn32.c:(.text+0x24ac4): undefined reference to `elf_core_write_extra_data' CONFIG_MIPS32_O32=y but CONFIG_BINFMT_ELF disabled results in the following linker errors: arch/mips/built-in.o: In function `elf_core_dump': binfmt_elfo32.c:(.text+0x28a04): undefined reference to `elf_core_extra_phdrs' binfmt_elfo32.c:(.text+0x29330): undefined reference to `elf_core_extra_data_size' binfmt_elfo32.c:(.text+0x2951c): undefined reference to `elf_core_write_extra_phdrs' binfmt_elfo32.c:(.text+0x29710): undefined reference to `elf_core_write_extra_data' This is because binfmt_elfn32 and binfmt_elfo32 are using symbols from elfcore but for these configurations elfcore will not be built. Fixed by making elfcore selectable by a separate config symbol which unlike the current mechanism can also be used from other directories than kernel/, then having each flavor of ELF that relies on elfcore.o, select it in Kconfig, including CONFIG_MIPS32_N32 and CONFIG_MIPS32_O32 which fixes this issue. Link: http://lkml.kernel.org/r/20160520141705.GA1913@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Reviewed-by: James Hogan <james.hogan@imgtec.com> Cc: "Maciej W. Rozycki" <macro@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Petr Mladek
|
42a0bb3f71 |
printk/nmi: generic solution for safe printk in NMI
printk() takes some locks and could not be used a safe way in NMI
context.
The chance of a deadlock is real especially when printing stacks from
all CPUs. This particular problem has been addressed on x86 by the
commit
|
|
|
Linus Torvalds
|
07b75260eb |
Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS updates from Ralf Baechle:
"This is the main pull request for MIPS for 4.7. Here's the summary of
the changes:
- ATH79: Support for DTB passuing using the UHI boot protocol
- ATH79: Remove support for builtin DTB.
- ATH79: Add zboot debug serial support.
- ATH79: Add initial support for Dragino MS14 (Dragine 2), Onion Omega
and DPT-Module.
- ATH79: Update devicetree clock support for AR9132 and AR9331.
- ATH79: Cleanup the DT code.
- ATH79: Support newer SOCs in ath79_ddr_ctrl_init.
- ATH79: Fix regression in PCI window initialization.
- BCM47xx: Move SPROM driver to drivers/firmware/
- BCM63xx: Enable partition parser in defconfig.
- BMIPS: BMIPS5000 has I cache filing from D cache
- BMIPS: BMIPS: Add cpu-feature-overrides.h
- BMIPS: Add Whirlwind support
- BMIPS: Adjust mips-hpt-frequency for BCM7435
- BMIPS: Remove maxcpus from BCM97435SVMB DTS
- BMIPS: Add missing 7038 L1 register cells to BCM7435
- BMIPS: Various tweaks to initialization code.
- BMIPS: Enable partition parser in defconfig.
- BMIPS: Cache tweaks.
- BMIPS: Add UART, I2C and SATA devices to DT.
- BMIPS: Add BCM6358 and BCM63268support
- BMIPS: Add device tree example for BCM6358.
- BMIPS: Improve Improve BCM6328 and BCM6368 device trees
- Lantiq: Add support for device tree file from boot loader
- Lantiq: Allow build with no built-in DT.
- Loongson 3: Reserve 32MB for RS780E integrated GPU.
- Loongson 3: Fix build error after ld-version.sh modification
- Loongson 3: Move chipset ACPI code from drivers to arch.
- Loongson 3: Speedup irq processing.
- Loongson 3: Add basic Loongson 3A support.
- Loongson 3: Set cache flush handlers to nop.
- Loongson 3: Invalidate special TLBs when needed.
- Loongson 3: Fast TLB refill handler.
- MT7620: Fallback strategy for invalid syscfg0.
- Netlogic: Fix CP0_EBASE redefinition warnings
- Octeon: Initialization fixes
- Octeon: Add DTS files for the D-Link DSR-1000N and EdgeRouter Lite
- Octeon: Enable add Octeon-drivers in cavium_octeon_defconfig
- Octeon: Correctly handle endian-swapped initramfs images.
- Octeon: Support CN73xx, CN75xx and CN78xx.
- Octeon: Remove dead code from cvmx-sysinfo.
- Octeon: Extend number of supported CPUs past 32.
- Octeon: Remove some code limiting NR_IRQS to 255.
- Octeon: Simplify octeon_irq_ciu_gpio_set_type.
- Octeon: Mark some functions __init in smp.c
- Octeon: Octeon: Add Octeon III CN7xxx interface detection
- PIC32: Add serial driver and bindings for it.
- PIC32: Add PIC32 deadman timer driver and bindings.
- PIC32: Add PIC32 clock timer driver and bindings.
- Pistachio: Determine SoC revision during boot
- Sibyte: Fix Kconfig dependencies of SIBYTE_BUS_WATCHER.
- Sibyte: Strip redundant comments from bcm1480_regs.h.
- Panic immediately if panic_on_oops is set.
- module: fix incorrect IS_ERR_VALUE macro usage.
- module: Make consistent use of pr_*
- Remove no longer needed work_on_cpu() call.
- Remove CONFIG_IPV6_PRIVACY from defconfigs.
- Fix registers of non-crashing CPUs in dumps.
- Handle MIPSisms in new vmcore_elf32_check_arch.
- Select CONFIG_HANDLE_DOMAIN_IRQ and make it work.
- Allow RIXI to be used on non-R2 or R6 cores.
- Reserve nosave data for hibernation
- Fix siginfo.h to use strict POSIX types.
- Don't unwind user mode with EVA.
- Fix watchpoint restoration
- Ptrace watchpoints for R6.
- Sync icache when it fills from dcache
- I6400 I-cache fills from dcache.
- Various MSA fixes.
- Cleanup MIPS_CPU_* definitions.
- Signal: Move generic copy_siginfo to signal.h
- Signal: Fix uapi include in exported asm/siginfo.h
- Timer fixes for sake of KVM.
- XPA TLB refill fixes.
- Treat perf counter feature
- Update John Crispin's email address
- Add PIC32 watchdog and bindings.
- Handle R10000 LL/SC bug in set_pte()
- cpufreq: Various fixes for Longson1.
- R6: Fix R2 emulation.
- mathemu: Cosmetic fix to ADDIUPC emulation, plenty of other small fixes
- ELF: ABI and FP fixes.
- Allow for relocatable kernel and use that to support KASLR.
- Fix CPC_BASE_ADDR mask
- Plenty fo smp-cps, CM, R6 and M6250 fixes.
- Make reset_control_ops const.
- Fix kernel command line handling of leading whitespace.
- Cleanups to cache handling.
- Add brcm, bcm6345-l1-intc device tree bindings.
- Use generic clkdev.h header
- Remove CLK_IS_ROOT usage.
- Misc small cleanups.
- CM: Fix compilation error when !MIPS_CM
- oprofile: Fix a preemption issue
- Detect DSP ASE v3 support:1"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (275 commits)
MIPS: pic32mzda: fix getting timer clock rate.
MIPS: ath79: fix regression in PCI window initialization
MIPS: ath79: make ath79_ddr_ctrl_init() compatible for newer SoCs
MIPS: Fix VZ probe gas errors with binutils <2.24
MIPS: perf: Fix I6400 event numbers
MIPS: DEC: Export `ioasic_ssr_lock' to modules
MIPS: MSA: Fix a link error on `_init_msa_upper' with older GCC
MIPS: CM: Fix compilation error when !MIPS_CM
MIPS: Fix genvdso error on rebuild
USB: ohci-jz4740: Remove obsolete driver
MIPS: JZ4740: Probe OHCI platform device via DT
MIPS: JZ4740: Qi LB60: Remove support for AVT2 variant
MIPS: pistachio: Determine SoC revision during boot
MIPS: BMIPS: Adjust mips-hpt-frequency for BCM7435
mips: mt7620: fallback to SDRAM when syscfg0 does not have a valid value for the memory type
MIPS: Prevent "restoration" of MSA context in non-MSA kernels
MIPS: cevt-r4k: Dynamically calculate min_delta_ns
MIPS: malta-time: Take seconds into account
MIPS: malta-time: Start GIC count before syncing to RTC
MIPS: Force CPUs to lose FP context during mode switches
...
|
|
|
Linus Torvalds
|
1eccc6e152 |
This is the bulk of GPIO changes for kernel cycle v4.7:
Core infrastructural changes:
- Support for natively single-ended GPIO driver stages. This
means that if the hardware has registers to configure open
drain or open source configuration, we use that rather than
(as we did before) try to emulate it by switching the line
to an input to get high impedance. This is also documented
throughly in Documentation/gpio/driver.txt for those of you
who did not understand one word of what I just wrote.
- Start to do away with the unnecessarily complex and
unitelligible ARCH_REQUIRE_GPIOLIB and
ARCH_WANT_OPTIONAL_GPIOLIB, another evolutional artifact from
the time when the GPIO subsystem was unmaintained. Archs can
now just select GPIOLIB and be done with it, cleanups to
arches will trickle in for the next kernel. Some minor archs
ACKed the changes immediately so these are included in this
pull request.
- Advancing the use of the data pointer inside the GPIO device
for storing driver data by switching the PowerPC, Super-H
Unicore and a few other subarches or subsystem drivers in
ALSA SoC, Input, serial, SSB, staging etc to use it.
- The initialization now reads the input/output state of the
GPIO lines, so that each GPIO descriptor knows - if this
callback is implemented - whether the line is input or
output. This also reflects nicely in userspace "lsgpio".
- It is now possible to name GPIO producer names, line names,
from the device tree. (Platform data has been supported for
a while.) I bet we will get a similar mechanism for ACPI
one of those days. This makes is possible to get sensible
producer names for e.g. GPIO rails in "lsgpio" in userspace.
New drivers:
- New driver for the Loongson1.
- The XLP driver now supports Broadcom Vulcan ARM64.
- The IT87 driver now supports IT8620 and IT8628.
- The PCA953X driver now supports Galileo Gen2.
Driver improvements:
- MCP23S08 was switched to use the gpiolib irqchip helpers and
now also suppors level-triggered interrupts.
- 74x164 and RCAR now supports the .set_multiple() callback
- AMDPT was converted to use generic GPIO.
- TC3589x, TPS65218, SX150X, F7188X, MENZ127, VX855, WM831X, WM8994
support the new single ended callback for open drain
and in some cases open source.
- Implement the .get_direction() callback for a few more drivers
like PL061, Xgene.
Cleanups:
- Paul Gortmaker combed through the drivers and de-modularized
those who are not really modules.
- Move the GPIO poweroff DT bindings to the power subdir where
they belong.
- Rename gpio-generic.c to gpio-mmio.c, which is much more to the
point. That's what it is handling, nothing more, nothing less.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=z4d6
-----END PGP SIGNATURE-----
Merge tag 'gpio-v4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO updates from Linus Walleij:
"This is the bulk of GPIO changes for kernel cycle v4.7:
Core infrastructural changes:
- Support for natively single-ended GPIO driver stages.
This means that if the hardware has registers to configure open
drain or open source configuration, we use that rather than (as we
did before) try to emulate it by switching the line to an input to
get high impedance.
This is also documented throughly in Documentation/gpio/driver.txt
for those of you who did not understand one word of what I just
wrote.
- Start to do away with the unnecessarily complex and unitelligible
ARCH_REQUIRE_GPIOLIB and ARCH_WANT_OPTIONAL_GPIOLIB, another
evolutional artifact from the time when the GPIO subsystem was
unmaintained.
Archs can now just select GPIOLIB and be done with it, cleanups to
arches will trickle in for the next kernel. Some minor archs ACKed
the changes immediately so these are included in this pull request.
- Advancing the use of the data pointer inside the GPIO device for
storing driver data by switching the PowerPC, Super-H Unicore and
a few other subarches or subsystem drivers in ALSA SoC, Input,
serial, SSB, staging etc to use it.
- The initialization now reads the input/output state of the GPIO
lines, so that each GPIO descriptor knows - if this callback is
implemented - whether the line is input or output. This also
reflects nicely in userspace "lsgpio".
- It is now possible to name GPIO producer names, line names, from
the device tree. (Platform data has been supported for a while).
I bet we will get a similar mechanism for ACPI one of those days.
This makes is possible to get sensible producer names for e.g.
GPIO rails in "lsgpio" in userspace.
New drivers:
- New driver for the Loongson1.
- The XLP driver now supports Broadcom Vulcan ARM64.
- The IT87 driver now supports IT8620 and IT8628.
- The PCA953X driver now supports Galileo Gen2.
Driver improvements:
- MCP23S08 was switched to use the gpiolib irqchip helpers and now
also suppors level-triggered interrupts.
- 74x164 and RCAR now supports the .set_multiple() callback
- AMDPT was converted to use generic GPIO.
- TC3589x, TPS65218, SX150X, F7188X, MENZ127, VX855, WM831X, WM8994
support the new single ended callback for open drain and in some
cases open source.
- Implement the .get_direction() callback for a few more drivers like
PL061, Xgene.
Cleanups:
- Paul Gortmaker combed through the drivers and de-modularized those
who are not really modules.
- Move the GPIO poweroff DT bindings to the power subdir where they
belong.
- Rename gpio-generic.c to gpio-mmio.c, which is much more to the
point. That's what it is handling, nothing more, nothing less"
* tag 'gpio-v4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (126 commits)
MIPS: do away with ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB
gpio: zevio: make it explicitly non-modular
gpio: timberdale: make it explicitly non-modular
gpio: stmpe: make it explicitly non-modular
gpio: sodaville: make it explicitly non-modular
pinctrl: sh-pfc: Let gpio_chip.to_irq() return zero on error
gpio: dwapb: Add ACPI device ID for DWAPB GPIO controller on X-Gene platforms
gpio: dt-bindings: add wd,mbl-gpio bindings
gpio: of: make it possible to name GPIO lines
gpio: make gpiod_to_irq() return negative for NO_IRQ
gpio: xgene: implement .get_direction()
gpio: xgene: Enable ACPI support for X-Gene GFC GPIO driver
gpio: tegra: Implement gpio_get_direction callback
gpio: set up initial state from .get_direction()
gpio: rename gpio-generic.c into gpio-mmio.c
gpio: generic: fix GPIO_GENERIC_PLATFORM is set to module case
gpio: dwapb: add gpio-signaled acpi event support
gpio: dwapb: convert device node to fwnode
gpio: dwapb: remove name from dwapb_port_property
gpio/qoriq: select IRQ_DOMAIN
...
|
|
|
Daniel Borkmann
|
6077776b59 |
bpf: split HAVE_BPF_JIT into cBPF and eBPF variant
Split the HAVE_BPF_JIT into two for distinguishing cBPF and eBPF JITs. Current cBPF ones: # git grep -n HAVE_CBPF_JIT arch/ arch/arm/Kconfig:44: select HAVE_CBPF_JIT arch/mips/Kconfig:18: select HAVE_CBPF_JIT if !CPU_MICROMIPS arch/powerpc/Kconfig:129: select HAVE_CBPF_JIT arch/sparc/Kconfig:35: select HAVE_CBPF_JIT Current eBPF ones: # git grep -n HAVE_EBPF_JIT arch/ arch/arm64/Kconfig:61: select HAVE_EBPF_JIT arch/s390/Kconfig:126: select HAVE_EBPF_JIT if PACK_STACK && HAVE_MARCH_Z196_FEATURES arch/x86/Kconfig:94: select HAVE_EBPF_JIT if X86_64 Later code also needs this facility to check for eBPF JITs. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> |
|
|
Florian Fainelli
|
b472080912 |
MIPS: BMIPS: BMIPS4380 and BMIPS5000 support RIXI
Make BMIPS4380 and BMIPS5000 advertise support for RIXI through cpu_probe_broadcom(). bmips_cpu_setup() needs to be called shortly after that, during prom_init() in order to enable the proper Broadcom-specific register to turn on RIXI and the "rotr" instruction. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Cc: john@phrozen.org Cc: cernekee@gmail.com Cc: jon.fraser@broadcom.com Cc: pgynther@google.com Cc: paul.burton@imgtec.com Cc: ddaney.cavm@gmail.com Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12507/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> |
|
|
Florian Fainelli
|
8256b17ecb |
MIPS: Allow RIXI to be used on non-R2 or R6 cores
Some processors, like Broadcom's BMIPS4380 and BMIPS5000 support RIXI and the "rotr" instruction, which can be used to get a slightly more efficient page table layout. Introduce a CONFIG_CPU_HAS_RIXI such that those cores can benefit from this feature. Perform the conditional check updates where relevant. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Cc: john@phrozen.org Cc: cernekee@gmail.com Cc: jon.fraser@broadcom.com Cc: pgynther@google.com Cc: paul.burton@imgtec.com Cc: ddaney.cavm@gmail.com Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12505/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> |
|
|
Rabin Vincent
|
ed47e15332 |
MIPS: Add support for extending builtin cmdline
Allow the builtin command line to be extended by what the bootloader passes in. For example, the bootloader can pass specific arguments depending on the boot mode, and these should override the defaults in the builtin cmdline. The default MIPS_CMDLINE_FROM_BOOTLOADER option prepends the bootloader's cmdline to the builtin cmdline so is not suitable for this purpose. Signed-off-by: Rabin Vincent <rabinv@axis.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13181/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> |
|
|
Paul Burton
|
2db003a5dd |
MIPS: Support extended ASIDs
Add support for extended ASIDs as determined by the Config4.AE bit. Since the only supported CPUs known to implement this are Netlogic XLP and MIPS I6400, select this variable ASID support based upon CONFIG_CPU_XLP and CONFIG_CPU_MIPSR6. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Jayachandran C. <jchandra@broadcom.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13211/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> |
|
|
Paul Burton
|
4edf00a46b |
MIPS: Retrieve ASID masks using function accepting struct cpuinfo_mips
In preparation for supporting variable ASID masks, retrieve ASID masks using functions in asm/cpu-info.h which accept struct cpuinfo_mips. This will allow those functions to determine the ASID mask based upon the CPU in a later patch. This also allows for the r3k & r8k cases to be handled in Kconfig, which is arguably cleaner than the previous #ifdefs. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13210/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> |
|
|
Paul Burton
|
87321fddae |
MIPS: Implement __arch_bitrev* using bitswap for MIPSr6
Release 6 of the MIPS architecture introduced the bitswap instruction, which reverses the bits within each byte of a word. Make use of this instruction to implement the __arch_bitrev* functions, which should be faster for most MIPSr6 CPUs, reduces code size slightly and allows us to avoid the lookup table used by the generic implementation, saving 256 bytes in the kernel binary by dropping that. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13204/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> |
|
|
Leonid Yegoshin
|
1e321fa917 |
MIPS64: Support of at least 48 bits of SEGBITS
SEGBITS is 40 bits or more, depending on CPU type. Introduces optional support for 48 bits of application virtual address space. Only 16K and 64K pages are supported. Enabling will result in a memory overhead of a small number of pages for small applications. For 64K pages a 3rd level of page tables is required which has some impact during software TLB refill. [ralf@linux-mips.org: Fixed things raised in the review of the version posted and changed kconfig to be a bit more userfriendly.] Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: aleksey.makarov@auriga.com Cc: james.hogan@imgtec.com Cc: paul.burton@imgtec.com Cc: david.daney@cavium.com Cc: peterz@infradead.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: davidlohr@hp.com Cc: kirill@shutemov.name Cc: akpm@linux-foundation.org Cc: mingo@kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10051/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> |
|
|
Huacai Chen
|
1e820da3c9 |
MIPS: Loongson-3: Introduce CONFIG_LOONGSON3_ENHANCEMENT
New Loongson 3 CPU (since Loongson-3A R2, as opposed to Loongson-3A R1, Loongson-3B R1 and Loongson-3B R2) has many enhancements, such as FTLB, L1-VCache, EI/DI/Wait/Prefetch instruction, DSP/DSPv2 ASE, User Local register, Read-Inhibit/Execute-Inhibit, SFB (Store Fill Buffer), Fast TLB refill support, etc. This patch introduce a config option, CONFIG_LOONGSON3_ENHANCEMENT, to enable those enhancements which are not probed at run time. If you want a generic kernel to run on all Loongson 3 machines, please say 'N' here. If you want a high-performance kernel to run on new Loongson 3 machines only, please say 'Y' here. Some additional explanations: 1) SFB locates between core and L1 cache, it causes memory access out of order, so writel/outl (and other similar functions) need a I/O reorder barrier. 2) Loongson 3 has a bug that di instruction can not save the irqflag, so arch_local_irq_save() is modified. Since CPU_MIPSR2 is selected by CONFIG_LOONGSON3_ENHANCEMENT, generic kernel doesn't use ei/di at all. 3) CPU_HAS_PREFETCH is selected by CONFIG_LOONGSON3_ENHANCEMENT, so MIPS_CPU_PREFETCH (used by uasm) probing is also put in this patch. Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Steven J . Hill <sjhill@realitydiluted.com> Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12755/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> |
|
|
Huacai Chen
|
b2edcfc814 |
MIPS: Loongson: Add Loongson-3A R2 basic support
Loongson-3 CPU family:
Code-name Brand-name PRId
Loongson-3A R1 Loongson-3A1000 0x6305
Loongson-3A R2 Loongson-3A2000 0x6308
Loongson-3B R1 Loongson-3B1000 0x6306
Loongson-3B R2 Loongson-3B1500 0x6307
Features of R2 revision of Loongson-3A:
- Primary cache includes I-Cache, D-Cache and V-Cache (Victim Cache).
- I-Cache, D-Cache and V-Cache are 16-way set-associative, linesize is
64 bytes.
- 64 entries of VTLB (classic TLB), 1024 entries of FTLB (8-way
set-associative).
- Supports DSP/DSPv2 instructions, UserLocal register and Read-Inhibit/
Execute-Inhibit.
[ralf@linux-mips.org: Resolved merge conflicts.]
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Steven J . Hill <sjhill@realitydiluted.com>
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12751/
Patchwork: https://patchwork.linux-mips.org/patch/13136/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
|
Kelvin Cheung
|
9ec88b60cb |
MIPS: Loongson1B: Some updates/fixes for LS1B
- Add DMA device - Add NAND device - Add GPIO device - Add LED device - Update the defconfig and rename it to loongson1b_defconfig - Fix ioremap size - Other minor fixes Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Richard Weinberger <richard@nod.at> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-clk@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: dmaengine@vger.kernel.org Cc: linux-gpio@vger.kernel.org Cc: linux-mtd@lists.infradead.org Patchwork: https://patchwork.linux-mips.org/patch/13033/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> |
|
|
Yang Shi
|
23021b2bb9 |
MIPS: Kconfig: replace OPROFILE=n to !OPROFILE
In Kconfig "=n" is not correct syntax, "!" is the preferred way for false-positive expression. Signed-off-by: Yang Shi <yang.shi@windriver.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12572/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> |
|
|
Matt Redfearn
|
405bc8fd12 |
MIPS: Kernel: Implement KASLR using CONFIG_RELOCATABLE
This patch adds KASLR to the MIPS kernel. Entropy is derived from the banner, which will change every build and random_get_entropy() which should provide additional runtime entropy. Additionally the bootloader may pass entropy via the /chosen/kaslr-seed node in device tree. The kernel is relocated by up to RANDOMIZE_BASE_MAX_OFFSET bytes from its link address (PHYSICAL_START). Because relocation happens so early in the kernel boot, the amount of physical memory has not yet been determined. This means the only way to limit relocation within the available memory is via Kconfig. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Cc: linux-mips@linux-mips.org Cc: kernel-hardening@lists.openwall.com Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12990/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> |