Only enables the interrupt and puts a irq handler into place, doesn't
do anything yet.
Unfortunately there's no gmbus interrupt support for gen2/3 (safe for
pnv, but there the irq is marked as "Test mode").
v2: Wire up the irq handler for vlv and gen4 properly.
v3: i915_enable_pipestat expects the mask bit, not the status bits ... and
for added hilarity those are rather inconsistently named.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The gmbus interrupt generation is rather fiddly: We can only ever
enable one interrupt source (but we always want to check for NAK
in addition to the real bit). And the bits in the gmbus status
register don't map at all to the bis in the irq register.
To prepare for this mess, start by extracting the hw status wait
loop into it's own function, consolidate the NAK error handling a
bit. To keep things flexible, pass in the status bit we care about
(in addition to any NAK signalling).
v2: I've failed to notice that the sense of GMBUS_ACTIVE is inverted,
Chris Wilson gladly pointed that out for me. To keep things simple,
ignore that case for now (we only need to idle the gmbus controller
at the end of an entire i2c transaction, not after every message).
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Otherwise the new&shiny irq-driven gmbus and dp aux code won't work that
well. Noticed since the dp aux code doesn't have an automatic fallback
with a timeout (since the hw provides for that already).
v2: Simple move drm_irq_install before intel_modeset_gem_init, as
suggested by Ben Widawsky.
v3: Now that interrupts are enabled before all connectors are fully
set up, we might fall over serving a HPD interrupt while things are
still being set up. Instead of jumping through massive hoops and
complicating the code with a separate hpd irq enable step, simply
block out the hotplug work item from doing anything until things are
in place.
v4: Actually, we can enable hotplug processing only after the fbdev is
fully set up, since we call down into the fbdev from the hotplug work
functions. So stick the hpd enabling right next to the poll helper
initialization.
v5: We need to enable irqs before intel_modeset_init, since that
function sets up the outputs.
v6: Fixup cleanup sequence, too.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
... together with all the other irq related resources in
intel_irq_init. I've managed to oops in the notify_ring function on my
ilk, presumably because of the powerctx setup call to i915_gpu_idle.
Note that this is only a problem with the reorder irq setup sequence
for irq-driver gmbus/dp aux.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This is for legacy legacy stuff, and checking with the leftover
pipe from the previous loop is propably not what we want. Since
pipe == 2 after the loop ... Then we only assing a variable and do
nothing with it.
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
If there are pre-wrap values in semaphore-mbox registers after wrap,
syncing against some after-wrap request will complete immediately.
Fix this by emitting ring commands to set mbox registers to zero
when the wrap happens.
v2: Use __intel_ring_begin to emit ring commands, from
Chris Wilson.
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Add a small comment to handle_seqno_wrap.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In preparation for handling ring seqno wrapping, split
intel_ring_begin into helper part which doesn't allocate
seqno.
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
seqno's are u32 so print accordingly
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This is needed for testing seqno wrapping. Be careful to not bump next_seqno
more than 0x7FFFFFFF at a time (between some handled requests) as
i915_seqno_passed() can't handle bigger difference in between.
v2: Address review comments from Chris Wilson.
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Squash in fixup to properly remove the debugfs file on driver
unload again.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
- __iomem where there is none (I love how we mix these things up).
- Use gfp_t instead of an other plain type.
- Unconfuse one place about enum pipe vs enum transcoder - for the pch
transcoder we actually use the pipe enum. Fixup the other cases
where we assign the pipe to the cpu transcoder with explicit casts.
- Declare the mch_lock properly in a header.
There is still a decent mess in intel_bios.c about __iomem, but heck,
this is x86 and we're allowed to do that.
Makes-sparse-happy: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Use a space after the cast consistently and fix up the
newly-added cast in i915_irq.c to properly use __iomem.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Simply use the last write-domain set for the object in the batch,
trusting userspace to have correctly flushed the caches between usage as
a write target. This check dates back from the golden age of having only
a single operation per batch with the kernel repeating it for each
cliprect, and conflicts both with userspace trying to efficiently batch
multiple operations and with reducing the kernel overhead of relocation
processing.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Be specific for the GPU domains so that we can detect if userspace ever
passed in an invalid combination, as well as accurately reflect the
known GPU domains when printing state.
Fixes i-g-t/gem_exec_bad_domains
References: https://bugs.freedesktop.org/show_bug.cgi?id=57826
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The primary purpose of this was to debug some use-after-free memory
corruption that was causing an OOPS inside drm/i915. As it turned out
the corruption was being caused elsewhere and i915.ko as a major user of
many objects was being hit hardest.
Indeed as we do frequent the generic kmalloc caches, dedicating one to
ourselves (or at least naming one for us depending upon the core) aids
debugging our own slab usage.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Acked-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Acked-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Acked-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Allow for the creation of GEM objects backed by stolen memory. As these
are not backed by ordinary pages, we create a fake dma mapping and store
the address in the scatterlist rather than obj->pages.
v2: Mark _i915_gem_object_create_stolen() as static, as noticed by Jesse
Barnes.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In order to accommodate objects that are not backed by struct pages, but
instead point into a contiguous region of stolen space, we need to make
various changes to avoid dereferencing obj->pages or obj->base.filp.
First introduce a marker for the stolen object, that specifies its
offset into the stolen region and implies that it has no backing pages.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
As FBC is commonly disabled due to limitations of the chipset upon
output configurations, on many systems FBC is never enabled. For those
systems, it is advantageous to make use of the stolen memory for other
objects and so we defer allocation of the FBC chunk until we actually
require it. This increases the likelihood of that allocation failing,
but that in turns means that we are already taking advantage of the
stolen memory!
As well as delaying the allocation from driver initialisation until the
first use of FBC, we also return the stolen block after we finish using
it - allowing greater flexibility in our usage of stolen space. A side
effect of this is that we can then attempt to allocate only the required
amount of space (with a little slack to reduce reallocation rate and
avoid fragmentation).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
As yet we do not do any preallocation (chicken-and-egg problem), but we
may like to preserve anything already allocated by the BIOS or grub and
reuse for own purposes after initialising the driver.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The routine to query the base of stolen memory was using the wrong
registers and the wrong encodings on virtually every platform.
It was not until the G33 refresh, that a PCI config register was
introduced that explicitly said where the stolen memory was. Prior to
865G there was not even a register that said where the end of usable
low memory was and where the stolen memory began (or ended depending
upon chipset). Before then, one has to look at the BIOS memory maps to
find the Top of Memory. Alas that is not exported by arch/x86 and so we
have to resort to disabling stolen memory on gen2 for the time being.
Then SandyBridge enlarged the PCI register to a full 32-bits and change
the encoding of the address, so even though we happened to be querying
the right register, we read the wrong bits and ended up using address 0
for our stolen data, i.e. notably FBC.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This will be used i915 in forthcoming patches in order to measure the
largest contiguous chunk of memory available for enabling chipset
features.
v2: Try to make the macro marginally safer and more readable by not
depending upon the drm_mm_hole_node_end() being non-zero. Note that we
need to open code list_for_each() in order to update the hole_start,
hole_end variable on each iteration and keep the macro sane.
v3: Tidy up few BUG_ONs that fell foul of adding additional tests to
drm_mm_hole_node_start().
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dave Airlie <airlied@redhat.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
To be used later by i915 to preallocate exact blocks of space from the
range manager.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dave Airlie <airlied@redhat.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We only need to read/write the south interrupt register if the
corresponding bit is set in the north master interrupt register.
Noticed while reading our interrupt handling code.
Same optimization has already been applied on ivb in
commit 0e43406bcc
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Wed May 9 21:45:44 2012 +0100
drm/i915: Simplify interrupt processing for IvyBridge
We can take advantage that the PCH_IIR is a subordinate register to
reduce one of the required IIR reads, and that we only need to clear
interrupts handled to reduce the writes. And by simply tidying the code
we can reduce the line count and hopefully make it more readable.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
spinlock_t should always be used.
LD drivers/gpu/drm/i915/built-in.o
CHECK drivers/gpu/drm/i915/i915_drv.c
CC [M] drivers/gpu/drm/i915/i915_drv.o
CHECK drivers/gpu/drm/i915/i915_dma.c
CC [M] drivers/gpu/drm/i915/i915_dma.o
CHECK drivers/gpu/drm/i915/i915_irq.c
CC [M] drivers/gpu/drm/i915/i915_irq.o
CHECK drivers/gpu/drm/i915/i915_debugfs.c
drivers/gpu/drm/i915/i915_debugfs.c:558:31: warning: dereference of noderef expression
drivers/gpu/drm/i915/i915_debugfs.c:558:39: warning: dereference of noderef expression
drivers/gpu/drm/i915/i915_debugfs.c:558:51: warning: dereference of noderef expression
drivers/gpu/drm/i915/i915_debugfs.c:558:63: warning: dereference of noderef expression
CC [M] drivers/gpu/drm/i915/i915_debugfs.o
CHECK drivers/gpu/drm/i915/i915_suspend.c
CC [M] drivers/gpu/drm/i915/i915_suspend.o
CHECK drivers/gpu/drm/i915/i915_gem.c
drivers/gpu/drm/i915/i915_gem.c:3703:14: warning: incorrect type in assignment (different base types)
drivers/gpu/drm/i915/i915_gem.c:3703:14: expected unsigned int [unsigned] [usertype] mask
drivers/gpu/drm/i915/i915_gem.c:3703:14: got restricted gfp_t
drivers/gpu/drm/i915/i915_gem.c:3706:22: warning: invalid assignment: &=
drivers/gpu/drm/i915/i915_gem.c:3706:22: left side has type unsigned int
drivers/gpu/drm/i915/i915_gem.c:3706:22: right side has type restricted gfp_t
drivers/gpu/drm/i915/i915_gem.c:3707:22: warning: invalid assignment: |=
drivers/gpu/drm/i915/i915_gem.c:3707:22: left side has type unsigned int
drivers/gpu/drm/i915/i915_gem.c:3707:22: right side has type restricted gfp_t
drivers/gpu/drm/i915/i915_gem.c:3711:39: warning: incorrect type in argument 2 (different base types)
drivers/gpu/drm/i915/i915_gem.c:3711:39: expected restricted gfp_t [usertype] mask
drivers/gpu/drm/i915/i915_gem.c:3711:39: got unsigned int [unsigned] [usertype] mask
CC [M] drivers/gpu/drm/i915/i915_gem.o
CHECK drivers/gpu/drm/i915/i915_gem_context.c
CC [M] drivers/gpu/drm/i915/i915_gem_context.o
CHECK drivers/gpu/drm/i915/i915_gem_debug.c
CC [M] drivers/gpu/drm/i915/i915_gem_debug.o
CHECK drivers/gpu/drm/i915/i915_gem_evict.c
CC [M] drivers/gpu/drm/i915/i915_gem_evict.o
CHECK drivers/gpu/drm/i915/i915_gem_execbuffer.c
CC [M] drivers/gpu/drm/i915/i915_gem_execbuffer.o
CHECK drivers/gpu/drm/i915/i915_gem_gtt.c
CC [M] drivers/gpu/drm/i915/i915_gem_gtt.o
CHECK drivers/gpu/drm/i915/i915_gem_stolen.c
CC [M] drivers/gpu/drm/i915/i915_gem_stolen.o
CHECK drivers/gpu/drm/i915/i915_gem_tiling.c
CC [M] drivers/gpu/drm/i915/i915_gem_tiling.o
CHECK drivers/gpu/drm/i915/i915_sysfs.c
CC [M] drivers/gpu/drm/i915/i915_sysfs.o
CHECK drivers/gpu/drm/i915/i915_trace_points.c
CC [M] drivers/gpu/drm/i915/i915_trace_points.o
CHECK drivers/gpu/drm/i915/intel_display.c
drivers/gpu/drm/i915/intel_display.c:1736:9: warning: mixing different enum types
drivers/gpu/drm/i915/intel_display.c:1736:9: int enum transcoder versus
drivers/gpu/drm/i915/intel_display.c:1736:9: int enum pipe
drivers/gpu/drm/i915/intel_display.c:3659:48: warning: mixing different enum types
drivers/gpu/drm/i915/intel_display.c:3659:48: int enum pipe versus
drivers/gpu/drm/i915/intel_display.c:3659:48: int enum transcoder
CC [M] drivers/gpu/drm/i915/intel_display.o
CHECK drivers/gpu/drm/i915/intel_crt.c
CC [M] drivers/gpu/drm/i915/intel_crt.o
CHECK drivers/gpu/drm/i915/intel_lvds.c
CC [M] drivers/gpu/drm/i915/intel_lvds.o
CHECK drivers/gpu/drm/i915/intel_bios.c
drivers/gpu/drm/i915/intel_bios.c:706:60: warning: incorrect type in initializer (different address spaces)
drivers/gpu/drm/i915/intel_bios.c:706:60: expected struct vbt_header *vbt
drivers/gpu/drm/i915/intel_bios.c:706:60: got void [noderef] <asn:2>*vbt
drivers/gpu/drm/i915/intel_bios.c:726:42: warning: incorrect type in argument 1 (different address spaces)
drivers/gpu/drm/i915/intel_bios.c:726:42: expected void const *<noident>
drivers/gpu/drm/i915/intel_bios.c:726:42: got unsigned char [noderef] [usertype] <asn:2>*
drivers/gpu/drm/i915/intel_bios.c:727:40: warning: cast removes address space of expression
drivers/gpu/drm/i915/intel_bios.c:738:24: warning: cast removes address space of expression
CC [M] drivers/gpu/drm/i915/intel_bios.o
CHECK drivers/gpu/drm/i915/intel_ddi.c
drivers/gpu/drm/i915/intel_ddi.c:87:6: warning: symbol 'intel_prepare_ddi_buffers' was not declared. Should it be static?
drivers/gpu/drm/i915/intel_ddi.c:1036:34: warning: mixing different enum types
drivers/gpu/drm/i915/intel_ddi.c:1036:34: int enum pipe versus
drivers/gpu/drm/i915/intel_ddi.c:1036:34: int enum transcoder
CC [M] drivers/gpu/drm/i915/intel_ddi.o
drivers/gpu/drm/i915/intel_ddi.c: In function ‘intel_ddi_setup_hw_pll_state’:
drivers/gpu/drm/i915/intel_ddi.c:1129:2: warning: ‘port’ may be used uninitialized in this function [-Wmaybe-uninitialized]
drivers/gpu/drm/i915/intel_ddi.c:1111:12: note: ‘port’ was declared here
CHECK drivers/gpu/drm/i915/intel_dp.c
CC [M] drivers/gpu/drm/i915/intel_dp.o
CHECK drivers/gpu/drm/i915/intel_hdmi.c
CC [M] drivers/gpu/drm/i915/intel_hdmi.o
CHECK drivers/gpu/drm/i915/intel_sdvo.c
CC [M] drivers/gpu/drm/i915/intel_sdvo.o
CHECK drivers/gpu/drm/i915/intel_modes.c
CC [M] drivers/gpu/drm/i915/intel_modes.o
CHECK drivers/gpu/drm/i915/intel_panel.c
CC [M] drivers/gpu/drm/i915/intel_panel.o
CHECK drivers/gpu/drm/i915/intel_pm.c
drivers/gpu/drm/i915/intel_pm.c:2173:1: warning: symbol 'mchdev_lock' was not declared. Should it be static?
CC [M] drivers/gpu/drm/i915/intel_pm.o
CHECK drivers/gpu/drm/i915/intel_i2c.c
CC [M] drivers/gpu/drm/i915/intel_i2c.o
CHECK drivers/gpu/drm/i915/intel_fb.c
CC [M] drivers/gpu/drm/i915/intel_fb.o
CHECK drivers/gpu/drm/i915/intel_tv.c
CC [M] drivers/gpu/drm/i915/intel_tv.o
CHECK drivers/gpu/drm/i915/intel_dvo.c
CC [M] drivers/gpu/drm/i915/intel_dvo.o
CHECK drivers/gpu/drm/i915/intel_ringbuffer.c
CC [M] drivers/gpu/drm/i915/intel_ringbuffer.o
CHECK drivers/gpu/drm/i915/intel_overlay.c
CC [M] drivers/gpu/drm/i915/intel_overlay.o
CHECK drivers/gpu/drm/i915/intel_sprite.c
CC [M] drivers/gpu/drm/i915/intel_sprite.o
CHECK drivers/gpu/drm/i915/intel_opregion.c
CC [M] drivers/gpu/drm/i915/intel_opregion.o
CHECK drivers/gpu/drm/i915/dvo_ch7xxx.c
CC [M] drivers/gpu/drm/i915/dvo_ch7xxx.o
CHECK drivers/gpu/drm/i915/dvo_ch7017.c
CC [M] drivers/gpu/drm/i915/dvo_ch7017.o
CHECK drivers/gpu/drm/i915/dvo_ivch.c
CC [M] drivers/gpu/drm/i915/dvo_ivch.o
CHECK drivers/gpu/drm/i915/dvo_tfp410.c
CC [M] drivers/gpu/drm/i915/dvo_tfp410.o
CHECK drivers/gpu/drm/i915/dvo_sil164.c
CC [M] drivers/gpu/drm/i915/dvo_sil164.o
CHECK drivers/gpu/drm/i915/dvo_ns2501.c
CC [M] drivers/gpu/drm/i915/dvo_ns2501.o
CHECK drivers/gpu/drm/i915/i915_gem_dmabuf.c
CC [M] drivers/gpu/drm/i915/i915_gem_dmabuf.o
CHECK drivers/gpu/drm/i915/i915_ioc32.c
CC [M] drivers/gpu/drm/i915/i915_ioc32.o
CHECK drivers/gpu/drm/i915/intel_acpi.c
CC [M] drivers/gpu/drm/i915/intel_acpi.o
LD [M] drivers/gpu/drm/i915/i915.o
Building modules, stage 2.
MODPOST 1 modules
CC drivers/gpu/drm/i915/i915.mod.o
LD [M] drivers/gpu/drm/i915/i915.ko
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Reported-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Use drm_dp_bw_code_to_link_rate insead. It's the same thing, but
supports DP_LINK_BW_5_4 and is also used by the other drivers.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Do an early return in case we don't have DDI instead of having the
whole function inside an "if" statement.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
And use it whenever we call code that uses the DDIs. We already have
intel_ddi.c and prefix every function with intel_ddi_something instead of
haswell_something, so I think replacing the checks with HAS_DDI makes more
sense. Just a cosmetical change, yes I know, but I have this OCD...
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This function is not called on Haswell anymore.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
It's not even declared on header files.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Since we drop dev->struct_mutex when going through the slowpath, the
object might have been moved out of the cpu domain. Hence we need to
clflush the entire object to ensure that after the ioctl returns,
everything is coherent again (interwoven writes are ill-defined
anyway).
But we only need to do this if we start in the cpu domain and the
object requires flushing for coherency. So don't do the flushing if
the object is coherent anyway or if we've done in-line clfushing
already.
v2: i915_gem_clflush_object already checks whether the object is
coherent and if so, drops the flushing. Hence we don't need to check
that ourselves, simplifying the condition.
v3: Reorder the checks for better clarity (and adjust the comment
accordingly), suggested by Chris Wilson.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The shmem paths for pwrite/pread used a clever trick to hold onto a
single page when dropping the big dev->struct_mutex for the slowpath.
But this ran the risk of reinstating (or not completely purging) the
backing storage when dropping purgeable objects.
Hence the code needed to keep track of whether it ever dropped the
lock, and if it did, manually check whether it needs to re-purge the
backing storage. But thanks to the pages pin count introduced in
commit a5570178c0
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Tue Sep 4 21:02:54 2012 +0100
drm/i915: Pin backing pages whilst exporting through a dmabuf vmap
which allowed us to pin the backing storage and remove that page
reference trick from shmem_pwrite/read in
commit f60d7f0c1d
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Tue Sep 4 21:02:56 2012 +0100
drm/i915: Pin backing pages for pread
and
commit 755d22184f
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Tue Sep 4 21:02:55 2012 +0100
drm/i915: Pin backing pages for pwrite
we can now abolish this check. The slowpath cleanup completely
disappears from pread, and for pwrite we're only left with the domain
fixup in case someone moved the object out of the cpu domain from
under us. A follow-on patch will optimize that a notch more.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Only two things needed adjustment:
- pipe select for PCH_CPT
- There's no dithering bit on ilk+ in the lvds ctl reg
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
A few things needed to change:
- HAS_PCH_SPLIT since ilk+ is not yet converted to this.
- s/LVDS/intel_lvds->reg/ to prep for ilk conversion
- replace the clock.p2 == 7 check with a is_dual_link check
- s/adjusted_mode/intel_lvds->fixed_mode
v2: Rebase on top of Jani Nikula's panel rework. I'm wondering whether
we shouldn't add an attached_panel pointer to intel_encoder, to
replace the encoder private ->attached_connector pointers, since
that's essentially what we need.
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
To ditch at least some of the PCH_SPLIT ? PCH_LVDS : LVDS code ...
v2: Rebase on top of Jani Nikula's panel rework.
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Yeah, all users (both the clock selection special cases and the lvds
pin pair stuff) are still in common code, but this will change.
v2: Rebase on top of Jani Nikula's panel rework.
v3: Incorporate review from Paulo Zanoni:
- s/__is_dual_link_lvds/compute_is_dual_link_lvds
- kill dev_priv->lvds_val
- drop spurious whitespace change
v4: Add a debug printk to display the dual-link status, as suggested
by Paulo Zanoni in review.
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> (v3)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Just a prep patch to make this a property of intel_lvds. Makes more
sense, removes clutter from intel_display.c and eventually I want to
move all the encoder special cases wrt clock handling to encoders
anyway.
v2: Add an intel_ prefixe to is_dual_link_lvds since it's non-static
now.
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
... with is_dual_link_lvds introduced in
commit b03543857f
Author: Takashi Iwai <tiwai@suse.de>
Date: Tue Mar 20 13:07:05 2012 +0100
drm/i915: Check VBIOS value for determining LVDS dual channel mode, too
All these checks predate this commit and have simply been overlooked.
Since we don't support switching between single-link and dual-link
modes anyway, this different checks could at best only get in the way
of refactorings, and in the worst case cause inconsistencies.
v2: Update the comment, we now have a solid way to figure out whether
we need dual-link lvds or not (falling back to vbt values as a last
resort). We still don't know how to switch between dual-link and
single link so leave that part intact. I'm not sure though whether
switching between these two modes makes any sense - we always drive
the panel at its fixed mode (with a fixed bpc) anyway ...
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Currently we have two encoder specific bits in the common mode_set
functions:
- lvds pin pair enabling
- dp m/n setting and computation
Now the lvds stuff needs to happen before the pll is enabled. Since
that is done in the crtc_mode_set functions, we need to add a new
callback to be able to move them to the encoder code (where they
belong). The dp m/n stuff is a giant mess anyway (since it also
confuses itself with the fdi link m/n handling), so that needs to be
handled separately.
I think that we can move the pll enabling down quite a bit, which
might allow us to eventually merge encoder->pre_enable with this new
pre_pll_enable callback. But for now this will allow us to clean
things up a bit.
Note that vlv doesn't support lvds, hence we don't need to change
anything in there.
v2: Fixup commit message, both suggested from Paulo Zanoni.
- dp m/n doesn't need to happen before pll enabling
- lvds doesn't exist on vlv, hence no changes required in the vlv pll
function.
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
As we do not have any domains occupying the high bits, there is no point
in always printing the leading 00.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
As per Chris Wilson's suggestion make
i915_gem_execbuffer_wait_for_flips() go away.
This was used to stall the GPU ring while there are pending
page flips involving the relevant BO. Ie. while the BO is still
being scanned out by the display controller.
The recommended alternative is to use the page flip events to
wait for the page flips to fully complete before reusing the BO
of the old front buffer. Or use more buffers.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Kristian Høgsberg <krh@bitplanet.net>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[danvet: don't remove obj->pending_flips, still required due to
reorder patches.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Somehow a chunk of unused register defines ended up in the middle of
the PLL defines. They go back to the original kms merging.
The only used #define is SR01, move it to the register name together
with the other legacy vga stuff.
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
i915_gem_handle_seqno_wrap() will zero all sync_seqnos but as the
wrap can happen inside ring->sync_to(), pre wrap seqno was
carried over and overwrote the zeroed sync_seqno.
When wrap is handled, all outstanding requests will be retired and
objects moved to inactive queue, causing their last_read_seqno to be zero.
Use this to update the sync_seqno correctly.
RING_SYNC registers after wrap will contain pre wrap values which
are >= seqno. So injecting the semaphore wait into ring completes
immediately.
Original idea for using last_read_seqno from Chris Wilson.
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Should be useful to know what the driver thought the other ring's seqno
was when it last used a semaphore.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Replace the wait for the ring to be clear with the more common wait for
the ring to be idle. The principle advantage is one less exported
intel_ring_wait function, and the removal of a hardcoded value.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
As we now always preallocate the seqno before writing to the ring, we
can trivially test if we have any pending activity on the ring by
inspecting the olr. This makes it then possible to flush operations that
are not normally associated with a request, like power-management.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Based on the work by Mika Kuoppala, we realised that we need to handle
seqno wraparound prior to committing our changes to the ring. The most
obvious point then is to grab the seqno inside intel_ring_begin(), and
then to reuse that seqno for all ring operations until the next request.
As intel_ring_begin() can fail, the callers must already be prepared to
handle such failure and so we can safely add further checks.
This patch looks like it should be split up into the interface
changes and the tweaks to move seqno wrapping from the execbuffer into
the core seqno increment. However, I found no easy way to break it into
incremental steps without introducing further broken behaviour.
v2: Mika found a silly mistake and a subtle error in the existing code;
inside i915_gem_retire_requests() we were resetting the sync_seqno of
the target ring based on the seqno from this ring - which are only
related by the order of their allocation, not retirement. Hence we were
applying the optimisation that the rings were synchronised too early,
fortunately the only real casualty there is the handling of seqno
wrapping.
v3: Do not forget to reset the sync_seqno upon module reinitialisation,
ala resume.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=863861
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> [v2]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter