Pull misc vfs updates from Al Viro:
"Assorted stuff, really no common topic here"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
vfs: grab the lock instead of blocking in __fd_install during resizing
vfs: stop clearing close on exec when closing a fd
include/linux/fs.h: fix comment about struct address_space
fs: make fiemap work from compat_ioctl
coda: fix 'kernel memory exposure attempt' in fsync
pstore: remove unneeded unlikely()
vfs: remove unneeded unlikely()
stubs for mount_bdev() and kill_block_super() in !CONFIG_BLOCK case
make vfs_ustat() static
do_handle_open() should be static
elf_fdpic: fix unused variable warning
fold destroy_super() into __put_super()
new helper: destroy_unused_super()
fix address space warnings in ipc/
acct.h: get rid of detritus
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull ipc compat cleanup and 64-bit time_t from Al Viro:
"IPC copyin/copyout sanitizing, including 64bit time_t work from Deepa
Dinamani"
* 'work.ipc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
utimes: Make utimes y2038 safe
ipc: shm: Make shmid_kernel timestamps y2038 safe
ipc: sem: Make sem_array timestamps y2038 safe
ipc: msg: Make msg_queue timestamps y2038 safe
ipc: mqueue: Replace timespec with timespec64
ipc: Make sys_semtimedop() y2038 safe
get rid of SYSVIPC_COMPAT on ia64
semtimedop(): move compat to native
shmat(2): move compat to native
msgrcv(2), msgsnd(2): move compat to native
ipc(2): move compat to native
ipc: make use of compat ipc_perm helpers
semctl(): move compat to native
semctl(): separate all layout-dependent copyin/copyout
msgctl(): move compat to native
msgctl(): split the actual work from copyin/copyout
ipc: move compat shmctl to native
shmctl: split the work from copyin/copyout
ipc_findkey() used to scan all objects to look for the wanted key. This
is slow when using a high number of keys. This change adds an rhashtable
of kern_ipc_perm objects in ipc_ids, so that one lookup cease to be O(n).
This change gives a 865% improvement of benchmark reaim.jobs_per_min on a
56 threads Intel(R) Xeon(R) CPU E5-2695 v3 @ 2.30GHz with 256G memory [1]
Other (more micro) benchmark results, by the author: On an i5 laptop, the
following loop executed right after a reboot took, without and with this
change:
for (int i = 0, k=0x424242; i < KEYS; ++i)
semget(k++, 1, IPC_CREAT | 0600);
total total max single max single
KEYS without with call without call with
1 3.5 4.9 µs 3.5 4.9
10 7.6 8.6 µs 3.7 4.7
32 16.2 15.9 µs 4.3 5.3
100 72.9 41.8 µs 3.7 4.7
1000 5,630.0 502.0 µs * *
10000 1,340,000.0 7,240.0 µs * *
31900 17,600,000.0 22,200.0 µs * *
*: unreliable measure: high variance
The duration for a lookup-only usage was obtained by the same loop once
the keys are present:
total total max single max single
KEYS without with call without call with
1 2.1 2.5 µs 2.1 2.5
10 4.5 4.8 µs 2.2 2.3
32 13.0 10.8 µs 2.3 2.8
100 82.9 25.1 µs * 2.3
1000 5,780.0 217.0 µs * *
10000 1,470,000.0 2,520.0 µs * *
31900 17,400,000.0 7,810.0 µs * *
Finally, executing each semget() in a new process gave, when still
summing only the durations of these syscalls:
creation:
total total
KEYS without with
1 3.7 5.0 µs
10 32.9 36.7 µs
32 125.0 109.0 µs
100 523.0 353.0 µs
1000 20,300.0 3,280.0 µs
10000 2,470,000.0 46,700.0 µs
31900 27,800,000.0 219,000.0 µs
lookup-only:
total total
KEYS without with
1 2.5 2.7 µs
10 25.4 24.4 µs
32 106.0 72.6 µs
100 591.0 352.0 µs
1000 22,400.0 2,250.0 µs
10000 2,510,000.0 25,700.0 µs
31900 28,200,000.0 115,000.0 µs
[1] http://lkml.kernel.org/r/20170814060507.GE23258@yexl-desktop
Link: http://lkml.kernel.org/r/20170815194954.ck32ta2z35yuzpwp@debix
Signed-off-by: Guillaume Knispel <guillaume.knispel@supersonicimagine.com>
Reviewed-by: Marc Pardo <marc.pardo@supersonicimagine.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: Andrey Vagin <avagin@openvz.org>
Cc: Guillaume Knispel <guillaume.knispel@supersonicimagine.com>
Cc: Marc Pardo <marc.pardo@supersonicimagine.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
time_t is not y2038 safe. Replace all uses of
time_t by y2038 safe time64_t.
Similarly, replace the calls to get_seconds() with
y2038 safe ktime_get_real_seconds().
Note that this preserves fast access on 64 bit systems,
but 32 bit systems need sequence counters.
The syscall interfaces themselves are not changed as part of
the patch. They will be part of a different series.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
When building with the randstruct gcc plugin, the layout of the IPC
structs will be randomized, which requires any sub-structure accesses to
use container_of(). The proc display handlers were missing the needed
container_of()s since the iterator is passing in the top-level struct
kern_ipc_perm.
This would lead to crashes when running the "lsipc" program after the
system had IPC registered (e.g. after starting up Gnome):
general protection fault: 0000 [#1] PREEMPT SMP
...
RIP: 0010:shm_add_rss_swap.isra.1+0x13/0xa0
...
Call Trace:
sysvipc_shm_proc_show+0x5e/0x150
sysvipc_proc_show+0x1a/0x30
seq_read+0x2e9/0x3f0
...
Link: http://lkml.kernel.org/r/20170730205950.GA55841@beast
Fixes: 3859a271a0 ("randstruct: Mark various structs for randomization")
Signed-off-by: Kees Cook <keescook@chromium.org>
Reported-by: Dominik Brodowski <linux@dominikbrodowski.net>
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Acked-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is nothing special about the msg_alloc/free routines any more, so
remove them to make code more readable.
[manfred@colorfullife.com: Rediff to keep rcu protection for security_msg_queue_alloc()]
Link: http://lkml.kernel.org/r/20170525185107.12869-19-manfred@colorfullife.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Only after ipc_addid() has succeeded will refcounting be used, so move
initialization into ipc_addid() and remove from open-coded *_alloc()
routines.
Link: http://lkml.kernel.org/r/20170525185107.12869-17-manfred@colorfullife.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Loosely based on a patch from Kees Cook <keescook@chromium.org>:
- id and retval can be merged
- if ipc_addid() fails, then use call_rcu() directly.
The difference is that call_rcu is used for failed ipc_addid() calls, to
continue to guaranteed an rcu delay for security_msg_queue_free().
Link: http://lkml.kernel.org/r/20170525185107.12869-16-manfred@colorfullife.com
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Instead of using ipc_rcu_alloc() which only performs the refcount bump,
open code it. This also allows for msg_queue structure layout to be
randomized in the future.
Link: http://lkml.kernel.org/r/20170525185107.12869-12-manfred@colorfullife.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Avoid using ipc_rcu_free, since it just re-finds the original structure
pointer. For the pre-list-init failure path, there is no RCU needed,
since it was just allocated. It can be directly freed.
Link: http://lkml.kernel.org/r/20170525185107.12869-8-manfred@colorfullife.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ipc has two management structures that exist for every id:
- struct kern_ipc_perm, it contains e.g. the permissions.
- struct ipc_rcu, it contains the rcu head for rcu handling and the
refcount.
The patch merges both structures.
As a bonus, we may save one cacheline, because both structures are
cacheline aligned. In addition, it reduces the number of casts, instead
most codepaths can use container_of.
To simplify code, the ipc_rcu_alloc initializes the allocation to 0.
[manfred@colorfullife.com: really include the memset() into ipc_alloc_rcu()]
Link: http://lkml.kernel.org/r/564f8612-0601-b267-514f-a9f650ec9b32@colorfullife.com
Link: http://lkml.kernel.org/r/20170525185107.12869-3-manfred@colorfullife.com
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We are going to split <linux/sched/wake_q.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.
Create a trivial placeholder <linux/sched/wake_q.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.
Include the new header in the files that are going to need it.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When LONG_MIN is passed to msgrcv, one would expect to recieve any
message. But convert_mode does *msgtyp = -*msgtyp and -LONG_MIN is
undefined. In particular, with my gcc -LONG_MIN produces -LONG_MIN
again.
So handle this case properly by assigning LONG_MAX to *msgtyp if
LONG_MIN was specified as msgtyp to msgrcv.
This code:
long msg[] = { 100, 200 };
int m = msgget(IPC_PRIVATE, IPC_CREAT | 0644);
msgsnd(m, &msg, sizeof(msg), 0);
msgrcv(m, &msg, sizeof(msg), LONG_MIN, 0);
produces currently nothing:
msgget(IPC_PRIVATE, IPC_CREAT|0644) = 65538
msgsnd(65538, {100, "\310\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"}, 16, 0) = 0
msgrcv(65538, ...
Except a UBSAN warning:
UBSAN: Undefined behaviour in ipc/msg.c:745:13
negation of -9223372036854775808 cannot be represented in type 'long int':
With the patch, I see what I expect:
msgget(IPC_PRIVATE, IPC_CREAT|0644) = 0
msgsnd(0, {100, "\310\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"}, 16, 0) = 0
msgrcv(0, {100, "\310\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"}, 16, -9223372036854775808, 0) = 16
Link: http://lkml.kernel.org/r/20161024082633.10148-1-jslaby@suse.cz
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently the wake_q data structure is defined by the WAKE_Q() macro.
This macro, however, looks like a function doing something as "wake" is
a verb. Even checkpatch.pl was confused as it reported warnings like
WARNING: Missing a blank line after declarations
#548: FILE: kernel/futex.c:3665:
+ int ret;
+ WAKE_Q(wake_q);
This patch renames the WAKE_Q() macro to DEFINE_WAKE_Q() which clarifies
what the macro is doing and eliminates the checkpatch.pl warnings.
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1479401198-1765-1-git-send-email-longman@redhat.com
[ Resolved conflict and added missing rename. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Blocked tasks queued in q_senders waiting for their message to fit in the
queue are blindly awoken every time we think there's a remote chance this
might happen. This could cause numerous (and expensive -- thundering
herd-ish) bogus wakeups if the queue is still really full. Adding to the
scheduling cost/overhead, there's also the fact that we need to take the
ipc object lock and requeue ourselves in the q_senders list.
By keeping track of the blocked sender's message size, we can know
previously if the wakeup ought to occur or not. Otherwise, to maintain
the current wakeup order we just move it to the tail. This is exactly
what occurs right now if the sender needs to go back to sleep.
The case of EIDRM is left completely untouched, as we need to wakeup all
the tasks, and shouldn't be playing games in the first place.
This patch was seen to save on the 'msgctl10' ltp testcase ~15% in context
switches (avg out of ten runs). Although these tests are really about
functionality (as opposed to performance), is does show the direct
benefits of the optimization.
[akpm@linux-foundation.org: coding-style fixes]
Link: http://lkml.kernel.org/r/1469748819-19484-6-git-send-email-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently the use of wake_qs in sysv msg queues are only for the receiver
tasks that are blocked on the queue. But blocked sender tasks (due to
queue size constraints) still are awoken with the ipc object lock held,
which can be a problem particularly for small sized queues and far from
gracious for -rt (just like it was for the receiver side).
The paths that actually wakeup a sender are obviously related to when we
are either getting rid of the queue or after (some) space is freed-up
after a receiver takes the msg (msgrcv). Furthermore, with the exception
of msgrcv, we can always piggy-back on expunge_all that has its own tasks
lined-up for waking. Finally, upon unlinking the message, it should be no
problem delaying the wakeups a bit until after we've released the lock.
Link: http://lkml.kernel.org/r/1469748819-19484-3-git-send-email-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch moves the wakeup_process() invocation so it is not done under
the ipc global lock by making use of a lockless wake_q. With this change,
the waiter is woken up once the message has been assigned and it does not
need to loop on SMP if the message points to NULL. In the signal case we
still need to check the pointer under the lock to verify the state.
This change should also avoid the introduction of preempt_disable() in -RT
which avoids a busy-loop which pools for the NULL -> !NULL change if the
waiter has a higher priority compared to the waker.
By making use of wake_qs, the logic of sysv msg queues is greatly
simplified (and very well suited as we can batch lockless wakeups),
particularly around the lockless receive algorithm.
This has been tested with Manred's pmsg-shared tool on a "AMD A10-7800
Radeon R7, 12 Compute Cores 4C+8G":
test | before | after | diff
-----------------|------------|------------|----------
pmsg-shared 8 60 | 19,347,422 | 30,442,191 | + ~57.34 %
pmsg-shared 4 60 | 21,367,197 | 35,743,458 | + ~67.28 %
pmsg-shared 2 60 | 22,884,224 | 24,278,200 | + ~6.09 %
Link: http://lkml.kernel.org/r/1469748819-19484-2-git-send-email-dave@stgolabs.net
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As reported by Dmitry Vyukov, we really shouldn't do ipc_addid() before
having initialized the IPC object state. Yes, we initialize the IPC
object in a locked state, but with all the lockless RCU lookup work,
that IPC object lock no longer means that the state cannot be seen.
We already did this for the IPC semaphore code (see commit e8577d1f0329:
"ipc/sem.c: fully initialize sem_array before making it visible") but we
clearly forgot about msg and shm.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
... to ipc_obtain_object_idr, which is more meaningful and makes the code
slightly easier to follow.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We currently use a full barrier on the sender side to to avoid receiver
tasks disappearing on us while still performing on the sender side wakeup.
We lack however, the proper CPU-CPU interactions pairing on the receiver
side which busy-waits for the message. Similarly, we do not need a full
smp_mb, and can relax the semantics for the writer and reader sides of the
message. This is safe as we are only ordering loads and stores to r_msg.
And in both smp_wmb and smp_rmb, there are no stores after the calls
_anyway_.
This obviously applies for pipelined_send and expunge_all, for EIRDM when
destroying a queue.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The seq_printf return value, because it's frequently misused,
will eventually be converted to void.
See: commit 1f33c41c03 ("seq_file: Rename seq_overflow() to
seq_has_overflowed() and make public")
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
SysV can be abused to allocate locked kernel memory. For most systems, a
small limit doesn't make sense, see the discussion with regards to SHMMAX.
Therefore: increase MSGMNI to the maximum supported.
And: If we ignore the risk of locking too much memory, then an automatic
scaling of MSGMNI doesn't make sense. Therefore the logic can be removed.
The code preserves auto_msgmni to avoid breaking any user space applications
that expect that the value exists.
Notes:
1) If an administrator must limit the memory allocations, then he can set
MSGMNI as necessary.
Or he can disable sysv entirely (as e.g. done by Android).
2) MSGMAX and MSGMNB are intentionally not increased, as these values are used
to control latency vs. throughput:
If MSGMNB is large, then msgsnd() just returns and more messages can be queued
before a task switch to a task that calls msgrcv() is forced.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Rafael Aquini <aquini@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The need for volatile is not obvious, document it.
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Aswin Chandramouleeswaran <aswin@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nothing big and no logical changes, just get rid of some redundant
function declarations. Move msg_[init/exit]_ns down the end of the
file.
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Aswin Chandramouleeswaran <aswin@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use #include <linux/uaccess.h> instead of <asm/uaccess.h>
Use #include <linux/types.h> instead of <asm/types.h>
Signed-off-by: Paul McQuade <paulmcquad@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is no need to recreate the very same ipc_ops structure on every
kernel entry for msgget/semget/shmget. Just declare it static and be
done with it. While at it, constify it as we don't modify the structure
at runtime.
Found in the PaX patch, written by the PaX Team.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: PaX Team <pageexec@freemail.hu>
Cc: Davidlohr Bueso <davidlohr@hp.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
While testing and documenting the msgrcv() MSG_COPY flag that Stanislav
Kinsbursky added in commit 4a674f34ba ("ipc: introduce message queue
copy feature" => kernel 3.8), I discovered a couple of bugs in the
implementation. The two bugs concern MSG_COPY interactions with other
msgrcv() flags, namely:
(A) MSG_COPY + MSG_EXCEPT
(B) MSG_COPY + !IPC_NOWAIT
The bugs are distinct (and the fix for the first one is obvious),
however my fix for both is a single-line patch, which is why I'm
combining them in a single mail, rather than writing two mails+patches.
===== (A) MSG_COPY + MSG_EXCEPT =====
With the addition of the MSG_COPY flag, there are now two msgrcv()
flags--MSG_COPY and MSG_EXCEPT--that modify the meaning of the 'msgtyp'
argument in unrelated ways. Specifying both in the same call is a
logical error that is currently permitted, with the effect that MSG_COPY
has priority and MSG_EXCEPT is ignored. The call should give an error
if both flags are specified. The patch below implements that behavior.
===== (B) (B) MSG_COPY + !IPC_NOWAIT =====
The test code that was submitted in commit 3a665531a3 ("selftests: IPC
message queue copy feature test") shows MSG_COPY being used in
conjunction with IPC_NOWAIT. In other words, if there is no message at
the position 'msgtyp'. return immediately with the error in ENOMSG.
What was not (fully) tested is the behavior if MSG_COPY is specified
*without* IPC_NOWAIT, and there is an odd behavior. If the queue
contains less than 'msgtyp' messages, then the call blocks until the
next message is written to the queue. At that point, the msgrcv() call
returns a copy of the newly added message, regardless of whether that
message is at the ordinal position 'msgtyp'. This is clearly bogus, and
problematic for applications that might want to make use of the MSG_COPY
flag.
I considered the following possible solutions to this problem:
(1) Force the call to block until a message *does* appear at the
position 'msgtyp'.
(2) If the MSG_COPY flag is specified, the kernel should implicitly add
IPC_NOWAIT, so that the call fails with ENOMSG for this case.
(3) If the MSG_COPY flag is specified, but IPC_NOWAIT is not, generate
an error (probably, EINVAL is the right one).
I do not know if any application would really want to have the
functionality of solution (1), especially since an application can
determine in advance the number of messages in the queue using msgctl()
IPC_STAT. Obviously, this solution would be the most work to implement.
Solution (2) would have the effect of silently fixing any applications
that tried to employ broken behavior. However, it would mean that if we
later decided to implement solution (1), then user-space could not
easily detect what the kernel supports (but, since I'm somewhat doubtful
that solution (1) is needed, I'm not sure that this is much of a
problem).
Solution (3) would have the effect of informing broken applications that
they are doing something broken. The downside is that this would cause
a ABI breakage for any applications that are currently employing the
broken behavior. However:
a) Those applications are almost certainly not getting the results they
expect.
b) Possibly, those applications don't even exist, because MSG_COPY is
currently hidden behind CONFIG_CHECKPOINT_RESTORE.
The upside of solution (3) is that if we later decided to implement
solution (1), user-space could determine what the kernel supports, via
the error return.
In my view, solution (3) is mildly preferable to solution (2), and
solution (1) could still be done later if anyone really cares. The
patch below implements solution (3).
PS. For anyone out there still listening, it's the usual story:
documenting an API (and the thinking about, and the testing of the API,
that documentation entails) is the one of the single best ways of
finding bugs in the API, as I've learned from a lot of experience. Best
to do that documentation before releasing the API.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Cc: Stanislav Kinsbursky <skinsbursky@parallels.com>
Cc: stable@vger.kernel.org
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Both expunge_all() and pipeline_send() rely on both a nil msg value and
a full barrier to guarantee the correct ordering when waking up a task.
While its counterpart at the receiving end is well documented for the
lockless recv algorithm, we still need to document these specific
smp_mb() calls.
[akpm@linux-foundation.org: fix typo, per Mike]
[akpm@linux-foundation.org: mroe tpyos]
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Cc: Aswin Chandramouleeswaran <aswin@hp.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The ipc code does not adhere the typical linux coding style.
This patch fixes lots of simple whitespace errors.
- mostly autogenerated by
scripts/checkpatch.pl -f --fix \
--types=pointer_location,spacing,space_before_tab
- one manual fixup (keep structure members tab-aligned)
- removal of additional space_before_tab that were not found by --fix
Tested with some of my msg and sem test apps.
Andrew: Could you include it in -mm and move it towards Linus' tree?
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Suggested-by: Li Bin <huawei.libin@huawei.com>
Cc: Joe Perches <joe@perches.com>
Acked-by: Rafael Aquini <aquini@redhat.com>
Cc: Davidlohr Bueso <davidlohr@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
After the locking semantics for the SysV IPC API got improved, a couple
of IPC_RMID race windows were opened because we ended up dropping the
'kern_ipc_perm.deleted' check performed way down in ipc_lock(). The
spotted races got sorted out by re-introducing the old test within the
racy critical sections.
This patch introduces ipc_valid_object() to consolidate the way we cope
with IPC_RMID races by using the same abstraction across the API
implementation.
Signed-off-by: Rafael Aquini <aquini@redhat.com>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Greg Thelen <gthelen@google.com>
Reviewed-by: Davidlohr Bueso <davidlohr@hp.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This fixes a race in both msgrcv() and msgsnd() between finding the msg
and actually dealing with the queue, as another thread can delete shmid
underneath us if we are preempted before acquiring the
kern_ipc_perm.lock.
Manfred illustrates this nicely:
Assume a preemptible kernel that is preempted just after
msq = msq_obtain_object_check(ns, msqid)
in do_msgrcv(). The only lock that is held is rcu_read_lock().
Now the other thread processes IPC_RMID. When the first task is
resumed, then it will happily wait for messages on a deleted queue.
Fix this by checking for if the queue has been deleted after taking the
lock.
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Reported-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: <stable@vger.kernel.org> [3.11]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently, IPC mechanisms do security and auditing related checks under
RCU. However, since security modules can free the security structure,
for example, through selinux_[sem,msg_queue,shm]_free_security(), we can
race if the structure is freed before other tasks are done with it,
creating a use-after-free condition. Manfred illustrates this nicely,
for instance with shared mem and selinux:
-> do_shmat calls rcu_read_lock()
-> do_shmat calls shm_object_check().
Checks that the object is still valid - but doesn't acquire any locks.
Then it returns.
-> do_shmat calls security_shm_shmat (e.g. selinux_shm_shmat)
-> selinux_shm_shmat calls ipc_has_perm()
-> ipc_has_perm accesses ipc_perms->security
shm_close()
-> shm_close acquires rw_mutex & shm_lock
-> shm_close calls shm_destroy
-> shm_destroy calls security_shm_free (e.g. selinux_shm_free_security)
-> selinux_shm_free_security calls ipc_free_security(&shp->shm_perm)
-> ipc_free_security calls kfree(ipc_perms->security)
This patch delays the freeing of the security structures after all RCU
readers are done. Furthermore it aligns the security life cycle with
that of the rest of IPC - freeing them based on the reference counter.
For situations where we need not free security, the current behavior is
kept. Linus states:
"... the old behavior was suspect for another reason too: having the
security blob go away from under a user sounds like it could cause
various other problems anyway, so I think the old code was at least
_prone_ to bugs even if it didn't have catastrophic behavior."
I have tested this patch with IPC testcases from LTP on both my
quad-core laptop and on a 64 core NUMA server. In both cases selinux is
enabled, and tests pass for both voluntary and forced preemption models.
While the mentioned races are theoretical (at least no one as reported
them), I wanted to make sure that this new logic doesn't break anything
we weren't aware of.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Acked-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is only one user left, drop this function and just call
ipc_unlock_object() and rcu_read_unlock().
Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since in some situations the lock can be shared for readers, we shouldn't
be calling it a mutex, rename it to rwsem.
Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The check if the queue is full and adding current to the wait queue of
pending msgsnd() operations (ss_add()) must be atomic.
Otherwise:
- the thread that performs msgsnd() finds a full queue and decides to
sleep.
- the thread that performs msgrcv() first reads all messages from the
queue and then sleeps, because the queue is empty.
- the msgrcv() calls do not perform any wakeups, because the msgsnd()
task has not yet called ss_add().
- then the msgsnd()-thread first calls ss_add() and then sleeps.
Net result: msgsnd() and msgrcv() both sleep forever.
Observed with msgctl08 from ltp with a preemptible kernel.
Fix: Call ipc_lock_object() before performing the check.
The patch also moves security_msg_queue_msgsnd() under ipc_lock_object:
- msgctl(IPC_SET) explicitely mentions that it tries to expunge any
pending operations that are not allowed anymore with the new
permissions. If security_msg_queue_msgsnd() is called without locks,
then there might be races.
- it makes the patch much simpler.
Reported-and-tested-by: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: stable@vger.kernel.org # for 3.11
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
According to 'man msgrcv': "If msgtyp is less than 0, the first message of
the lowest type that is less than or equal to the absolute value of msgtyp
shall be received."
Bug: The kernel only returns a message if its type is 1; other messages
with type < abs(msgtype) will never get returned.
Fix: After having traversed the list to find the first message with the
lowest type, we need to actually return that message.
This regression was introduced by commit daaf74cf08 ("ipc: refactor
msg list search into separate function")
Signed-off-by: Svenning Soerensen <sss@secomea.dk>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We can now drop the msg_lock and msg_lock_check functions along with a
bogus comment introduced previously in semctl_down.
Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
do_msgrcv() is the last msg queue function that abuses the ipc lock Take
it only when needed when actually updating msq.
Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Rik van Riel <riel@redhat.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
do_msgsnd() is another function that does too many things with the ipc
object lock acquired. Take it only when needed when actually updating
msq.
Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds