Commit 0a196848ca ("perf: Fix arch_perf_out_copy_user default"),
changes copy_from_user_nmi() to return the number of
remaining bytes so that it behave like copy_from_user().
Unfortunately, when the range is outside of the process
memory, the return value is still the number of byte
copied, eg. 0, instead of the remaining bytes.
As all users of copy_from_user_nmi() were modified as
part of commit 0a196848ca, the function should be
fixed to return the total number of bytes if range is
not correct.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1435001923-30986-1-git-send-email-ydroneaud@opteya.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull x86 core updates from Ingo Molnar:
"There were so many changes in the x86/asm, x86/apic and x86/mm topics
in this cycle that the topical separation of -tip broke down somewhat -
so the result is a more traditional architecture pull request,
collected into the 'x86/core' topic.
The topics were still maintained separately as far as possible, so
bisectability and conceptual separation should still be pretty good -
but there were a handful of merge points to avoid excessive
dependencies (and conflicts) that would have been poorly tested in the
end.
The next cycle will hopefully be much more quiet (or at least will
have fewer dependencies).
The main changes in this cycle were:
* x86/apic changes, with related IRQ core changes: (Jiang Liu, Thomas
Gleixner)
- This is the second and most intrusive part of changes to the x86
interrupt handling - full conversion to hierarchical interrupt
domains:
[IOAPIC domain] -----
|
[MSI domain] --------[Remapping domain] ----- [ Vector domain ]
| (optional) |
[HPET MSI domain] ----- |
|
[DMAR domain] -----------------------------
|
[Legacy domain] -----------------------------
This now reflects the actual hardware and allowed us to distangle
the domain specific code from the underlying parent domain, which
can be optional in the case of interrupt remapping. It's a clear
separation of functionality and removes quite some duct tape
constructs which plugged the remap code between ioapic/msi/hpet
and the vector management.
- Intel IOMMU IRQ remapping enhancements, to allow direct interrupt
injection into guests (Feng Wu)
* x86/asm changes:
- Tons of cleanups and small speedups, micro-optimizations. This
is in preparation to move a good chunk of the low level entry
code from assembly to C code (Denys Vlasenko, Andy Lutomirski,
Brian Gerst)
- Moved all system entry related code to a new home under
arch/x86/entry/ (Ingo Molnar)
- Removal of the fragile and ugly CFI dwarf debuginfo annotations.
Conversion to C will reintroduce many of them - but meanwhile
they are only getting in the way, and the upstream kernel does
not rely on them (Ingo Molnar)
- NOP handling refinements. (Borislav Petkov)
* x86/mm changes:
- Big PAT and MTRR rework: making the code more robust and
preparing to phase out exposing direct MTRR interfaces to drivers -
in favor of using PAT driven interfaces (Toshi Kani, Luis R
Rodriguez, Borislav Petkov)
- New ioremap_wt()/set_memory_wt() interfaces to support
Write-Through cached memory mappings. This is especially
important for good performance on NVDIMM hardware (Toshi Kani)
* x86/ras changes:
- Add support for deferred errors on AMD (Aravind Gopalakrishnan)
This is an important RAS feature which adds hardware support for
poisoned data. That means roughly that the hardware marks data
which it has detected as corrupted but wasn't able to correct, as
poisoned data and raises an APIC interrupt to signal that in the
form of a deferred error. It is the OS's responsibility then to
take proper recovery action and thus prolonge system lifetime as
far as possible.
- Add support for Intel "Local MCE"s: upcoming CPUs will support
CPU-local MCE interrupts, as opposed to the traditional system-
wide broadcasted MCE interrupts (Ashok Raj)
- Misc cleanups (Borislav Petkov)
* x86/platform changes:
- Intel Atom SoC updates
... and lots of other cleanups, fixlets and other changes - see the
shortlog and the Git log for details"
* 'x86-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (222 commits)
x86/hpet: Use proper hpet device number for MSI allocation
x86/hpet: Check for irq==0 when allocating hpet MSI interrupts
x86/mm/pat, drivers/infiniband/ipath: Use arch_phys_wc_add() and require PAT disabled
x86/mm/pat, drivers/media/ivtv: Use arch_phys_wc_add() and require PAT disabled
x86/platform/intel/baytrail: Add comments about why we disabled HPET on Baytrail
genirq: Prevent crash in irq_move_irq()
genirq: Enhance irq_data_to_desc() to support hierarchy irqdomain
iommu, x86: Properly handle posted interrupts for IOMMU hotplug
iommu, x86: Provide irq_remapping_cap() interface
iommu, x86: Setup Posted-Interrupts capability for Intel iommu
iommu, x86: Add cap_pi_support() to detect VT-d PI capability
iommu, x86: Avoid migrating VT-d posted interrupts
iommu, x86: Save the mode (posted or remapped) of an IRTE
iommu, x86: Implement irq_set_vcpu_affinity for intel_ir_chip
iommu: dmar: Provide helper to copy shared irte fields
iommu: dmar: Extend struct irte for VT-d Posted-Interrupts
iommu: Add new member capability to struct irq_remap_ops
x86/asm/entry/64: Disentangle error_entry/exit gsbase/ebx/usermode code
x86/asm/entry/32: Shorten __audit_syscall_entry() args preparation
x86/asm/entry/32: Explain reloading of registers after __audit_syscall_entry()
...
Pull x86 FPU updates from Ingo Molnar:
"This tree contains two main changes:
- The big FPU code rewrite: wide reaching cleanups and reorganization
that pulls all the FPU code together into a clean base in
arch/x86/fpu/.
The resulting code is leaner and faster, and much easier to
understand. This enables future work to further simplify the FPU
code (such as removing lazy FPU restores).
By its nature these changes have a substantial regression risk: FPU
code related bugs are long lived, because races are often subtle
and bugs mask as user-space failures that are difficult to track
back to kernel side backs. I'm aware of no unfixed (or even
suspected) FPU related regression so far.
- MPX support rework/fixes. As this is still not a released CPU
feature, there were some buglets in the code - should be much more
robust now (Dave Hansen)"
* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (250 commits)
x86/fpu: Fix double-increment in setup_xstate_features()
x86/mpx: Allow 32-bit binaries on 64-bit kernels again
x86/mpx: Do not count MPX VMAs as neighbors when unmapping
x86/mpx: Rewrite the unmap code
x86/mpx: Support 32-bit binaries on 64-bit kernels
x86/mpx: Use 32-bit-only cmpxchg() for 32-bit apps
x86/mpx: Introduce new 'directory entry' to 'addr' helper function
x86/mpx: Add temporary variable to reduce masking
x86: Make is_64bit_mm() widely available
x86/mpx: Trace allocation of new bounds tables
x86/mpx: Trace the attempts to find bounds tables
x86/mpx: Trace entry to bounds exception paths
x86/mpx: Trace #BR exceptions
x86/mpx: Introduce a boot-time disable flag
x86/mpx: Restrict the mmap() size check to bounds tables
x86/mpx: Remove redundant MPX_BNDCFG_ADDR_MASK
x86/mpx: Clean up the code by not passing a task pointer around when unnecessary
x86/mpx: Use the new get_xsave_field_ptr()API
x86/fpu/xstate: Wrap get_xsave_addr() to make it safer
x86/fpu/xstate: Fix up bad get_xsave_addr() assumptions
...
preempt_schedule_context() is a tracing safe preemption point but it's
only used when CONFIG_CONTEXT_TRACKING=y. Other configs have tracing
recursion issues since commit:
b30f0e3ffe ("sched/preempt: Optimize preemption operations on __schedule() callers")
introduced function based preemp_count_*() ops.
Lets make it available on all configs and give it a more appropriate
name for its new position.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1433432349-1021-3-git-send-email-fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
These are all calling x86 entry code functions, so move them close
to other entry code.
Change lib-y to obj-y: there's no real difference between the two
as we don't really drop any of them during the linking stage, and
obj-y is the more common approach for core kernel object code.
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
So the dwarf2 annotations in low level assembly code have
become an increasing hindrance: unreadable, messy macros
mixed into some of the most security sensitive code paths
of the Linux kernel.
These debug info annotations don't even buy the upstream
kernel anything: dwarf driven stack unwinding has caused
problems in the past so it's out of tree, and the upstream
kernel only uses the much more robust framepointers based
stack unwinding method.
In addition to that there's a steady, slow bitrot going
on with these annotations, requiring frequent fixups.
There's no tooling and no functionality upstream that
keeps it correct.
So burn down the sick forest, allowing new, healthier growth:
27 files changed, 350 insertions(+), 1101 deletions(-)
Someone who has the willingness and time to do this
properly can attempt to reintroduce dwarf debuginfo in x86
assembly code plus dwarf unwinding from first principles,
with the following conditions:
- it should be maximally readable, and maximally low-key to
'ordinary' code reading and maintenance.
- find a build time method to insert dwarf annotations
automatically in the most common cases, for pop/push
instructions that manipulate the stack pointer. This could
be done for example via a preprocessing step that just
looks for common patterns - plus special annotations for
the few cases where we want to depart from the default.
We have hundreds of CFI annotations, so automating most of
that makes sense.
- it should come with build tooling checks that ensure that
CFI annotations are sensible. We've seen such efforts from
the framepointer side, and there's no reason it couldn't be
done on the dwarf side.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We already have fpu/types.h, move i387.h to fpu/api.h.
The file name has become a misnomer anyway: it offers generic FPU APIs,
but is not limited to i387 functionality.
Reviewed-by: Borislav Petkov <bp@alien8.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull it up into the header and kill duplicate versions.
Separately, both macros are identical:
35948b2bd3431aee7149e85cfe4becbc /tmp/a
35948b2bd3431aee7149e85cfe4becbc /tmp/b
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1431538944-27724-3-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit cae2a173fe ("x86: clean up/fix 'copy_in_user()' tail zeroing")
fixed the failure case tail zeroing of one special case of the x86-64
generic user-copy routine, namely when used for the user-to-user case
("copy_in_user()").
But in the process it broke an even more unusual case: using the user
copy routine for kernel-to-kernel copying.
Now, normally kernel-kernel copies are obviously done using memcpy(),
but we have a couple of special cases when we use the user-copy
functions. One is when we pass a kernel buffer to a regular user-buffer
routine, using set_fs(KERNEL_DS). That's a "normal" case, and continued
to work fine, because it never takes any faults (with the possible
exception of a silent and successful vmalloc fault).
But Jan Beulich pointed out another, very unusual, special case: when we
use the user-copy routines not because it's a path that expects a user
pointer, but for a couple of ftrace/kgdb cases that want to do a kernel
copy, but do so using "unsafe" buffers, and use the user-copy routine to
gracefully handle faults. IOW, for probe_kernel_write().
And that broke for the case of a faulting kernel destination, because we
saw the kernel destination and wanted to try to clear the tail of the
buffer. Which doesn't work, since that's what faults.
This only triggers for things like kgdb and ftrace users (eg trying
setting a breakpoint on read-only memory), but it's definitely a bug.
The fix is to not compare against the kernel address start (TASK_SIZE),
but instead use the same limits "access_ok()" uses.
Reported-and-tested-by: Jan Beulich <jbeulich@suse.com>
Cc: stable@vger.kernel.org # 4.0
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull x86 asm changes from Ingo Molnar:
"There were lots of changes in this development cycle:
- over 100 separate cleanups, restructuring changes, speedups and
fixes in the x86 system call, irq, trap and other entry code, part
of a heroic effort to deobfuscate a decade old spaghetti asm code
and its C code dependencies (Denys Vlasenko, Andy Lutomirski)
- alternatives code fixes and enhancements (Borislav Petkov)
- simplifications and cleanups to the compat code (Brian Gerst)
- signal handling fixes and new x86 testcases (Andy Lutomirski)
- various other fixes and cleanups
By their nature many of these changes are risky - we tried to test
them well on many different x86 systems (there are no known
regressions), and they are split up finely to help bisection - but
there's still a fair bit of residual risk left so caveat emptor"
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (148 commits)
perf/x86/64: Report regs_user->ax too in get_regs_user()
perf/x86/64: Simplify regs_user->abi setting code in get_regs_user()
perf/x86/64: Do report user_regs->cx while we are in syscall, in get_regs_user()
perf/x86/64: Do not guess user_regs->cs, ss, sp in get_regs_user()
x86/asm/entry/32: Tidy up JNZ instructions after TESTs
x86/asm/entry/64: Reduce padding in execve stubs
x86/asm/entry/64: Remove GET_THREAD_INFO() in ret_from_fork
x86/asm/entry/64: Simplify jumps in ret_from_fork
x86/asm/entry/64: Remove a redundant jump
x86/asm/entry/64: Optimize [v]fork/clone stubs
x86/asm/entry: Zero EXTRA_REGS for stub32_execve() too
x86/asm/entry/64: Move stub_x32_execvecloser() to stub_execveat()
x86/asm/entry/64: Use common code for rt_sigreturn() epilogue
x86/asm/entry/64: Add forgotten CFI annotation
x86/asm/entry/irq: Simplify interrupt dispatch table (IDT) layout
x86/asm/entry/64: Move opportunistic sysret code to syscall code path
x86, selftests: Add sigreturn selftest
x86/alternatives: Guard NOPs optimization
x86/asm/entry: Clear EXTRA_REGS for all executable formats
x86/signal: Remove pax argument from restore_sigcontext
...
The rule for 'copy_from_user()' is that it zeroes the remaining kernel
buffer even when the copy fails halfway, just to make sure that we don't
leave uninitialized kernel memory around. Because even if we check for
errors, some kernel buffers stay around after thge copy (think page
cache).
However, the x86-64 logic for user copies uses a copy_user_generic()
function for all the cases, that set the "zerorest" flag for any fault
on the source buffer. Which meant that it didn't just try to clear the
kernel buffer after a failure in copy_from_user(), it also tried to
clear the destination user buffer for the "copy_in_user()" case.
Not only is that pointless, it also means that the clearing code has to
worry about the tail clearing taking page faults for the user buffer
case. Which is just stupid, since that case shouldn't happen in the
first place.
Get rid of the whole "zerorest" thing entirely, and instead just check
if the destination is in kernel space or not. And then just use
memset() to clear the tail of the kernel buffer if necessary.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
By the nature of the TEST operation, it is often possible to test
a narrower part of the operand:
"testl $3, mem" -> "testb $3, mem",
"testq $3, %rcx" -> "testb $3, %cl"
This results in shorter instructions, because the TEST instruction
has no sign-entending byte-immediate forms unlike other ALU ops.
Note that this change does not create any LCP (Length-Changing Prefix)
stalls, which happen when adding a 0x66 prefix, which happens when
16-bit immediates are used, which changes such TEST instructions:
[test_opcode] [modrm] [imm32]
to:
[0x66] [test_opcode] [modrm] [imm16]
where [imm16] has a *different length* now: 2 bytes instead of 4.
This confuses the decoder and slows down execution.
REX prefixes were carefully designed to almost never hit this case:
adding REX prefix does not change instruction length except MOVABS
and MOV [addr],RAX instruction.
This patch does not add instructions which would use a 0x66 prefix,
code changes in assembly are:
-48 f7 07 01 00 00 00 testq $0x1,(%rdi)
+f6 07 01 testb $0x1,(%rdi)
-48 f7 c1 01 00 00 00 test $0x1,%rcx
+f6 c1 01 test $0x1,%cl
-48 f7 c1 02 00 00 00 test $0x2,%rcx
+f6 c1 02 test $0x2,%cl
-41 f7 c2 01 00 00 00 test $0x1,%r10d
+41 f6 c2 01 test $0x1,%r10b
-48 f7 c1 04 00 00 00 test $0x4,%rcx
+f6 c1 04 test $0x4,%cl
-48 f7 c1 08 00 00 00 test $0x8,%rcx
+f6 c1 08 test $0x8,%cl
Linus further notes:
"There are no stalls from using 8-bit instruction forms.
Now, changing from 64-bit or 32-bit 'test' instructions to 8-bit ones
*could* cause problems if it ends up having forwarding issues, so that
instead of just forwarding the result, you end up having to wait for
it to be stable in the L1 cache (or possibly the register file). The
forwarding from the store buffer is simplest and most reliable if the
read is done at the exact same address and the exact same size as the
write that gets forwarded.
But that's true only if:
(a) the write was very recent and is still in the write queue. I'm
not sure that's the case here anyway.
(b) on at least most Intel microarchitectures, you have to test a
different byte than the lowest one (so forwarding a 64-bit write
to a 8-bit read ends up working fine, as long as the 8-bit read
is of the low 8 bits of the written data).
A very similar issue *might* show up for registers too, not just
memory writes, if you use 'testb' with a high-byte register (where
instead of forwarding the value from the original producer it needs to
go through the register file and then shifted). But it's mainly a
problem for store buffers.
But afaik, the way Denys changed the test instructions, neither of the
above issues should be true.
The real problem for store buffer forwarding tends to be "write 8
bits, read 32 bits". That can be really surprisingly expensive,
because the read ends up having to wait until the write has hit the
cacheline, and we might talk tens of cycles of latency here. But
"write 32 bits, read the low 8 bits" *should* be fast on pretty much
all x86 chips, afaik."
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
Acked-by: Andy Lutomirski <luto@amacapital.net>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Drewry <wad@chromium.org>
Link: http://lkml.kernel.org/r/1425675332-31576-1-git-send-email-dvlasenk@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This is a preparatory patch for change in "struct pt_regs"
handling in entry_64.S.
trace_hardirqs*() thunks were (ab)using a part of the
'pt_regs' handling code, namely the SAVE_ARGS/RESTORE_ARGS
macros, to save/restore registers across C function calls.
Since SAVE_ARGS is going to be changed, open-code
register saving/restoring here.
Incidentally, this removes a bit of dead code:
one SAVE_ARGS was used just to emit a CFI annotation,
but it also generated unreachable assembly instructions.
Take a page from thunk_32.S and use push/pop instructions
instead of movq, they are far shorter:
1 or 2 bytes versus 5, and no need for instructions to adjust %rsp:
text data bss dec hex filename
333 40 0 373 175 thunk_64_movq.o
104 40 0 144 90 thunk_64_push_pop.o
[ This is ugly as sin, but we'll fix up the ugliness in the next
patch. I see no point in reordering patches just to avoid an
ugly intermediate state. --Andy ]
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Will Drewry <wad@chromium.org>
Link: http://lkml.kernel.org/r/1420927210-19738-4-git-send-email-dvlasenk@redhat.com
Link: http://lkml.kernel.org/r/4c979ad604f0f02c5ade3b3da308b53eabd5e198.1424989793.git.luto@amacapital.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
pad instructions and thus make using the alternatives macros more
straightforward and without having to figure out old and new instruction
sizes but have the toolchain figure that out for us.
Furthermore, it optimizes JMPs used so that fetch and decode can be
relieved with smaller versions of the JMPs, where possible.
Some stats:
x86_64 defconfig:
Alternatives sites total: 2478
Total padding added (in Bytes): 6051
The padding is currently done for:
X86_FEATURE_ALWAYS
X86_FEATURE_ERMS
X86_FEATURE_LFENCE_RDTSC
X86_FEATURE_MFENCE_RDTSC
X86_FEATURE_SMAP
This is with the latest version of the patchset. Of course, on each
machine the alternatives sites actually being patched are a proper
subset of the total number.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJU9ekpAAoJEBLB8Bhh3lVKyjYP/AiHEiHkkjnpwTt49kUtUMI6
GIlGfJVNjp5LLnSRD/fkL/wdkBgQtMzr9O1g8Qi/lbFqxsOFteU9f1OtLx34ZwZw
MhtdiHcrKGMsaIxTJh4FaqPHBT5ussm2yn1jlAX+LgILd3dpqe3oytsO8JihcK9j
t2u9V/Lq92TV7zXxGgWJsPc86WhhgdldlU3X96S++Di18bnDaKbGkzthU6WzZG/H
qtFZ5bfK8TlVHYduft+D9ZPzFYGp1WCOa03qU4+Djaxw02HDB6Ltysend9zg0lB1
RT/BP0PwHD3mOL11qpgtV1ChCbR8FJMN/z5+YdSNJgzDQA0H5Sf0UueTweosfAz+
/iC5t/wkegdYtqtA0nKVypYOJCS+UdfMZXenYgtSUJl6drB6I5BCW4mVft3AuWo+
EilPGpblvmjWRx1HiF4/Q/5zrSWHzmKQDyXuyxI9m0OUxAGAM0+8CY6wOqRA5pX+
/f5MjZ1hXELQGhl5Qdj4nqJacICGevJ8WYdZ53B+uYVxz7fbXk9hSYcZKT94UshD
qSdaV4XJSuC7pDKqiWoNWXp5N1g+D2BgfwoQEr/RnodFZRlfc+cmOv/visak0OLr
E/pp1vJvCi3+T3ImX1MCDiXmflQtFctiL3hNgMXYK2IGhJb2RDC2bFeZkksOHuAE
BGgrn+usQDjVlikEnfI3
=0KXp
-----END PGP SIGNATURE-----
Merge tag 'alternatives_padding' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp into x86/asm
Pull alternative instructions framework improvements from Borislav Petkov:
"A more involved rework of the alternatives framework to be able to
pad instructions and thus make using the alternatives macros more
straightforward and without having to figure out old and new instruction
sizes but have the toolchain figure that out for us.
Furthermore, it optimizes JMPs used so that fetch and decode can be
relieved with smaller versions of the JMPs, where possible.
Some stats:
x86_64 defconfig:
Alternatives sites total: 2478
Total padding added (in Bytes): 6051
The padding is currently done for:
X86_FEATURE_ALWAYS
X86_FEATURE_ERMS
X86_FEATURE_LFENCE_RDTSC
X86_FEATURE_MFENCE_RDTSC
X86_FEATURE_SMAP
This is with the latest version of the patchset. Of course, on each
machine the alternatives sites actually being patched are a proper
subset of the total number."
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Make it execute the ERMS version if support is present and we're in the
forward memmove() part and remove the unfolded alternatives section
definition.
Signed-off-by: Borislav Petkov <bp@suse.de>
Make alternatives replace single JMPs instead of whole memset functions,
thus decreasing the amount of instructions copied during patching time
at boot.
While at it, make it use the REP_GOOD version by default which means
alternatives NOP out the JMP to the other versions, as REP_GOOD is set
by default on the majority of relevant x86 processors.
Signed-off-by: Borislav Petkov <bp@suse.de>
Move clear_page() up so that we can get 2-byte forward JMPs when
patching:
apply_alternatives: feat: 3*32+16, old: (ffffffff8130adb0, len: 5), repl: (ffffffff81d0b859, len: 5)
ffffffff8130adb0: alt_insn: 90 90 90 90 90
recompute_jump: new_displ: 0x0000003e
ffffffff81d0b859: rpl_insn: eb 3e 66 66 90
even though the compiler generated 5-byte JMPs which we padded with 5
NOPs.
Also, make the REP_GOOD version be the default as the majority of
machines set REP_GOOD. This way we get to save ourselves the JMP:
old insn VA: 0xffffffff813038b0, CPU feat: X86_FEATURE_REP_GOOD, size: 5, padlen: 0
clear_page:
ffffffff813038b0 <clear_page>:
ffffffff813038b0: e9 0b 00 00 00 jmpq ffffffff813038c0
repl insn: 0xffffffff81cf0e92, size: 0
old insn VA: 0xffffffff813038b0, CPU feat: X86_FEATURE_ERMS, size: 5, padlen: 0
clear_page:
ffffffff813038b0 <clear_page>:
ffffffff813038b0: e9 0b 00 00 00 jmpq ffffffff813038c0
repl insn: 0xffffffff81cf0e92, size: 5
ffffffff81cf0e92: e9 69 2a 61 ff jmpq ffffffff81303900
ffffffff813038b0 <clear_page>:
ffffffff813038b0: e9 69 2a 61 ff jmpq ffffffff8091631e
Signed-off-by: Borislav Petkov <bp@suse.de>
... instead of the semi-version with the spelled out sections.
What is more, make the REP_GOOD version be the default copy_page()
version as the majority of the relevant x86 CPUs do set
X86_FEATURE_REP_GOOD. Thus, copy_page gets compiled to:
ffffffff8130af80 <copy_page>:
ffffffff8130af80: e9 0b 00 00 00 jmpq ffffffff8130af90 <copy_page_regs>
ffffffff8130af85: b9 00 02 00 00 mov $0x200,%ecx
ffffffff8130af8a: f3 48 a5 rep movsq %ds:(%rsi),%es:(%rdi)
ffffffff8130af8d: c3 retq
ffffffff8130af8e: 66 90 xchg %ax,%ax
ffffffff8130af90 <copy_page_regs>:
...
and after the alternatives have run, the JMP to the old, unrolled
version gets NOPed out:
ffffffff8130af80 <copy_page>:
ffffffff8130af80: 66 66 90 xchg %ax,%ax
ffffffff8130af83: 66 90 xchg %ax,%ax
ffffffff8130af85: b9 00 02 00 00 mov $0x200,%ecx
ffffffff8130af8a: f3 48 a5 rep movsq %ds:(%rsi),%es:(%rdi)
ffffffff8130af8d: c3 retq
On modern uarches, those NOPs are cheaper than the unconditional JMP
previously.
Signed-off-by: Borislav Petkov <bp@suse.de>
Up until now we had to pay attention to relative JMPs in alternatives
about how their relative offset gets computed so that the jump target
is still correct. Or, as it is the case for near CALLs (opcode e8), we
still have to go and readjust the offset at patching time.
What is more, the static_cpu_has_safe() facility had to forcefully
generate 5-byte JMPs since we couldn't rely on the compiler to generate
properly sized ones so we had to force the longest ones. Worse than
that, sometimes it would generate a replacement JMP which is longer than
the original one, thus overwriting the beginning of the next instruction
at patching time.
So, in order to alleviate all that and make using JMPs more
straight-forward we go and pad the original instruction in an
alternative block with NOPs at build time, should the replacement(s) be
longer. This way, alternatives users shouldn't pay special attention
so that original and replacement instruction sizes are fine but the
assembler would simply add padding where needed and not do anything
otherwise.
As a second aspect, we go and recompute JMPs at patching time so that we
can try to make 5-byte JMPs into two-byte ones if possible. If not, we
still have to recompute the offsets as the replacement JMP gets put far
away in the .altinstr_replacement section leading to a wrong offset if
copied verbatim.
For example, on a locally generated kernel image
old insn VA: 0xffffffff810014bd, CPU feat: X86_FEATURE_ALWAYS, size: 2
__switch_to:
ffffffff810014bd: eb 21 jmp ffffffff810014e0
repl insn: size: 5
ffffffff81d0b23c: e9 b1 62 2f ff jmpq ffffffff810014f2
gets corrected to a 2-byte JMP:
apply_alternatives: feat: 3*32+21, old: (ffffffff810014bd, len: 2), repl: (ffffffff81d0b23c, len: 5)
alt_insn: e9 b1 62 2f ff
recompute_jumps: next_rip: ffffffff81d0b241, tgt_rip: ffffffff810014f2, new_displ: 0x00000033, ret len: 2
converted to: eb 33 90 90 90
and a 5-byte JMP:
old insn VA: 0xffffffff81001516, CPU feat: X86_FEATURE_ALWAYS, size: 2
__switch_to:
ffffffff81001516: eb 30 jmp ffffffff81001548
repl insn: size: 5
ffffffff81d0b241: e9 10 63 2f ff jmpq ffffffff81001556
gets shortened into a two-byte one:
apply_alternatives: feat: 3*32+21, old: (ffffffff81001516, len: 2), repl: (ffffffff81d0b241, len: 5)
alt_insn: e9 10 63 2f ff
recompute_jumps: next_rip: ffffffff81d0b246, tgt_rip: ffffffff81001556, new_displ: 0x0000003e, ret len: 2
converted to: eb 3e 90 90 90
... and so on.
This leads to a net win of around
40ish replacements * 3 bytes savings =~ 120 bytes of I$
on an AMD guest which means some savings of precious instruction cache
bandwidth. The padding to the shorter 2-byte JMPs are single-byte NOPs
which on smart microarchitectures means discarding NOPs at decode time
and thus freeing up execution bandwidth.
Signed-off-by: Borislav Petkov <bp@suse.de>
Up until now we have always paid attention to make sure the length of
the new instruction replacing the old one is at least less or equal to
the length of the old instruction. If the new instruction is longer, at
the time it replaces the old instruction it will overwrite the beginning
of the next instruction in the kernel image and cause your pants to
catch fire.
So instead of having to pay attention, teach the alternatives framework
to pad shorter old instructions with NOPs at buildtime - but only in the
case when
len(old instruction(s)) < len(new instruction(s))
and add nothing in the >= case. (In that case we do add_nops() when
patching).
This way the alternatives user shouldn't have to care about instruction
sizes and simply use the macros.
Add asm ALTERNATIVE* flavor macros too, while at it.
Also, we need to save the pad length in a separate struct alt_instr
member for NOP optimization and the way to do that reliably is to carry
the pad length instead of trying to detect whether we're looking at
single-byte NOPs or at pathological instruction offsets like e9 90 90 90
90, for example, which is a valid instruction.
Thanks to Michael Matz for the great help with toolchain questions.
Signed-off-by: Borislav Petkov <bp@suse.de>
x86 instructions cannot exceed 15 bytes, and the instruction
decoder should enforce that. Prior to 6ba48ff46f, the
instruction length limit was implicitly set to 16, which was an
approximation of 15, but there is currently no limit at all.
Fix MAX_INSN_SIZE (it should be 15, not 16), and fix the decoder
to reject instructions that exceed MAX_INSN_SIZE.
Other than potentially confusing some of the decoder sanity
checks, I'm not aware of any actual problems that omitting this
check would cause, nor am I aware of any practical problems
caused by the MAX_INSN_SIZE error.
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Fixes: 6ba48ff46f ("x86: Remove arbitrary instruction size limit ...
Link: http://lkml.kernel.org/r/f8f0bc9b8c58cfd6830f7d88400bf1396cbdcd0f.1422403511.git.luto@amacapital.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Recently instrumentation of builtin functions calls was removed from GCC
5.0. To check the memory accessed by such functions, userspace asan
always uses interceptors for them.
So now we should do this as well. This patch declares
memset/memmove/memcpy as weak symbols. In mm/kasan/kasan.c we have our
own implementation of those functions which checks memory before accessing
it.
Default memset/memmove/memcpy now now always have aliases with '__'
prefix. For files that built without kasan instrumentation (e.g.
mm/slub.c) original mem* replaced (via #define) with prefixed variants,
cause we don't want to check memory accesses there.
Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Konstantin Serebryany <kcc@google.com>
Cc: Dmitry Chernenkov <dmitryc@google.com>
Signed-off-by: Andrey Konovalov <adech.fo@gmail.com>
Cc: Yuri Gribov <tetra2005@gmail.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Stephane reported that the PEBS fixup was broken by the recent commit to
the instruction decoder. The thing had an off-by-one which resulted in
not being able to decode the last instruction and always bail.
Reported-by: Stephane Eranian <eranian@google.com>
Fixes: 6ba48ff46f ("x86: Remove arbitrary instruction size limit in instruction decoder")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org # 3.18
Cc: <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Liang Kan <kan.liang@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Link: http://lkml.kernel.org/r/20141216104614.GV3337@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull networking updates from David Miller:
1) New offloading infrastructure and example 'rocker' driver for
offloading of switching and routing to hardware.
This work was done by a large group of dedicated individuals, not
limited to: Scott Feldman, Jiri Pirko, Thomas Graf, John Fastabend,
Jamal Hadi Salim, Andy Gospodarek, Florian Fainelli, Roopa Prabhu
2) Start making the networking operate on IOV iterators instead of
modifying iov objects in-situ during transfers. Thanks to Al Viro
and Herbert Xu.
3) A set of new netlink interfaces for the TIPC stack, from Richard
Alpe.
4) Remove unnecessary looping during ipv6 routing lookups, from Martin
KaFai Lau.
5) Add PAUSE frame generation support to gianfar driver, from Matei
Pavaluca.
6) Allow for larger reordering levels in TCP, which are easily
achievable in the real world right now, from Eric Dumazet.
7) Add a variable of napi_schedule that doesn't need to disable cpu
interrupts, from Eric Dumazet.
8) Use a doubly linked list to optimize neigh_parms_release(), from
Nicolas Dichtel.
9) Various enhancements to the kernel BPF verifier, and allow eBPF
programs to actually be attached to sockets. From Alexei
Starovoitov.
10) Support TSO/LSO in sunvnet driver, from David L Stevens.
11) Allow controlling ECN usage via routing metrics, from Florian
Westphal.
12) Remote checksum offload, from Tom Herbert.
13) Add split-header receive, BQL, and xmit_more support to amd-xgbe
driver, from Thomas Lendacky.
14) Add MPLS support to openvswitch, from Simon Horman.
15) Support wildcard tunnel endpoints in ipv6 tunnels, from Steffen
Klassert.
16) Do gro flushes on a per-device basis using a timer, from Eric
Dumazet. This tries to resolve the conflicting goals between the
desired handling of bulk vs. RPC-like traffic.
17) Allow userspace to ask for the CPU upon what a packet was
received/steered, via SO_INCOMING_CPU. From Eric Dumazet.
18) Limit GSO packets to half the current congestion window, from Eric
Dumazet.
19) Add a generic helper so that all drivers set their RSS keys in a
consistent way, from Eric Dumazet.
20) Add xmit_more support to enic driver, from Govindarajulu
Varadarajan.
21) Add VLAN packet scheduler action, from Jiri Pirko.
22) Support configurable RSS hash functions via ethtool, from Eyal
Perry.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1820 commits)
Fix race condition between vxlan_sock_add and vxlan_sock_release
net/macb: fix compilation warning for print_hex_dump() called with skb->mac_header
net/mlx4: Add support for A0 steering
net/mlx4: Refactor QUERY_PORT
net/mlx4_core: Add explicit error message when rule doesn't meet configuration
net/mlx4: Add A0 hybrid steering
net/mlx4: Add mlx4_bitmap zone allocator
net/mlx4: Add a check if there are too many reserved QPs
net/mlx4: Change QP allocation scheme
net/mlx4_core: Use tasklet for user-space CQ completion events
net/mlx4_core: Mask out host side virtualization features for guests
net/mlx4_en: Set csum level for encapsulated packets
be2net: Export tunnel offloads only when a VxLAN tunnel is created
gianfar: Fix dma check map error when DMA_API_DEBUG is enabled
cxgb4/csiostor: Don't use MASTER_MUST for fw_hello call
net: fec: only enable mdio interrupt before phy device link up
net: fec: clear all interrupt events to support i.MX6SX
net: fec: reset fep link status in suspend function
net: sock: fix access via invalid file descriptor
net: introduce helper macro for_each_cmsghdr
...
As there are now no remaining users of arch_fast_hash(), lets kill
it entirely.
This basically reverts commit 71ae8aac3e ("lib: introduce arch
optimized hash library") and follow-up work, that is f.e., commit
237217546d ("lib: hash: follow-up fixups for arch hash"),
commit e3fec2f74f ("lib: Add missing arch generic-y entries for
asm-generic/hash.h") and last but not least commit 6a02652df5
("perf tools: Fix include for non x86 architectures").
Cc: Francesco Fusco <fusco@ntop.org>
Cc: Thomas Graf <tgraf@suug.ch>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull x86 MPX support from Thomas Gleixner:
"This enables support for x86 MPX.
MPX is a new debug feature for bound checking in user space. It
requires kernel support to handle the bound tables and decode the
bound violating instruction in the trap handler"
* 'x86-mpx-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
asm-generic: Remove asm-generic arch_bprm_mm_init()
mm: Make arch_unmap()/bprm_mm_init() available to all architectures
x86: Cleanly separate use of asm-generic/mm_hooks.h
x86 mpx: Change return type of get_reg_offset()
fs: Do not include mpx.h in exec.c
x86, mpx: Add documentation on Intel MPX
x86, mpx: Cleanup unused bound tables
x86, mpx: On-demand kernel allocation of bounds tables
x86, mpx: Decode MPX instruction to get bound violation information
x86, mpx: Add MPX-specific mmap interface
x86, mpx: Introduce VM_MPX to indicate that a VMA is MPX specific
x86, mpx: Add MPX to disabled features
ia64: Sync struct siginfo with general version
mips: Sync struct siginfo with general version
mpx: Extend siginfo structure to include bound violation information
x86, mpx: Rename cfg_reg_u and status_reg
x86: mpx: Give bndX registers actual names
x86: Remove arbitrary instruction size limit in instruction decoder
The current x86 instruction decoder steps along through the
instruction stream but always ensures that it never steps farther
than the largest possible instruction size (MAX_INSN_SIZE).
The MPX code is now going to be doing some decoding of userspace
instructions. We copy those from userspace in to the kernel and
they're obviously completely untrusted coming from userspace. In
addition to the constraint that instructions can only be so long,
we also have to be aware of how long the buffer is that came in
from userspace. This _looks_ to be similar to what the perf and
kprobes is doing, but it's unclear to me whether they are
affected.
The whole reason we need this is that it is perfectly valid to be
executing an instruction within MAX_INSN_SIZE bytes of an
unreadable page. We should be able to gracefully handle short
reads in those cases.
This adds support to the decoder to record how long the buffer
being decoded is and to refuse to "validate" the instruction if
we would have gone over the end of the buffer to decode it.
The kprobes code probably needs to be looked at here a bit more
carefully. This patch still respects the MAX_INSN_SIZE limit
there but the kprobes code does look like it might be able to
be a bit more strict than it currently is.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Jim Keniston <jkenisto@us.ibm.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: x86@kernel.org
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Link: http://lkml.kernel.org/r/20141114153957.E6B01535@viggo.jf.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Al Viro pointed out that the x86-64 csum_partial_copy_from_user() is
somewhat confused about what it should do on errors, notably it mostly
clears the uncopied end result buffer, but misses that for the initial
alignment case.
All users should check for errors, so it's dubious whether the clearing
is even necessary, and Al also points out that we should probably clean
up the calling conventions, but regardless of any future changes to this
function, the fact that it is inconsistent is just annoying.
So make the __get_user() failure path use the same error exit as all the
other errors do.
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: David Miller <davem@davemloft.net>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull x86 asm updates from Ingo Molnar:
"The changes in this cycle were:
- Speed up the x86 __preempt_schedule() implementation
- Fix/improve low level asm code debug info annotations"
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Unwind-annotate thunk_32.S
x86: Improve cmpxchg8b_emu.S
x86: Improve cmpxchg16b_emu.S
x86/lib/Makefile: Remove the unnecessary "+= thunk_64.o"
x86: Speed up ___preempt_schedule*() by using THUNK helpers
- don't include unneeded headers
- drop redundant entry point label
- complete unwind annotations
- use .L prefix on local labels to not clutter the symbol table
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Link: http://lkml.kernel.org/r/5422917E0200007800038081@mail.emea.novell.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
- don't include unneeded headers
- don't open-code PER_CPU_VAR()
- drop redundant entry point label
- complete unwind annotations
- use .L prefix on local label to not clutter the symbol table
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Link: http://lkml.kernel.org/r/542290BC020000780003807D@mail.emea.novell.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Trivial. We have "lib-y += thunk_$(BITS).o" at the start, no
need to add thunk_64.o if !CONFIG_X86_32.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Andy Lutomirski <luto@amacapital.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20140921184232.GB23727@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
___preempt_schedule() does SAVE_ALL/RESTORE_ALL but this is
suboptimal, we do not need to save/restore the callee-saved
register. And we already have arch/x86/lib/thunk_*.S which
implements the similar asm wrappers, so it makes sense to
redefine ___preempt_schedule() as "THUNK ..." and remove
preempt.S altogether.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Andy Lutomirski <luto@amacapital.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20140921184153.GA23727@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch removes the unused asm/rwlock.h and rwlock.S files.
Signed-off-by: Waiman Long <Waiman.Long@hp.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1408037251-45918-3-git-send-email-Waiman.Long@hp.com
Cc: Scott J Norton <scott.norton@hp.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Daniel Borkmann <dborkman@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Francesco Fusco <ffusco@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Graf <tgraf@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull more perf updates from Ingo Molnar:
"A second round of perf updates:
- wide reaching kprobes sanitization and robustization, with the hope
of fixing all 'probe this function crashes the kernel' bugs, by
Masami Hiramatsu.
- uprobes updates from Oleg Nesterov: tmpfs support, corner case
fixes and robustization work.
- perf tooling updates and fixes from Jiri Olsa, Namhyung Ki, Arnaldo
et al:
* Add support to accumulate hist periods (Namhyung Kim)
* various fixes, refactorings and enhancements"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (101 commits)
perf: Differentiate exec() and non-exec() comm events
perf: Fix perf_event_comm() vs. exec() assumption
uprobes/x86: Rename arch_uprobe->def to ->defparam, minor comment updates
perf/documentation: Add description for conditional branch filter
perf/x86: Add conditional branch filtering support
perf/tool: Add conditional branch filter 'cond' to perf record
perf: Add new conditional branch filter 'PERF_SAMPLE_BRANCH_COND'
uprobes: Teach copy_insn() to support tmpfs
uprobes: Shift ->readpage check from __copy_insn() to uprobe_register()
perf/x86: Use common PMU interrupt disabled code
perf/ARM: Use common PMU interrupt disabled code
perf: Disable sampled events if no PMU interrupt
perf: Fix use after free in perf_remove_from_context()
perf tools: Fix 'make help' message error
perf record: Fix poll return value propagation
perf tools: Move elide bool into perf_hpp_fmt struct
perf tools: Remove elide setup for SORT_MODE__MEMORY mode
perf tools: Fix "==" into "=" in ui_browser__warning assignment
perf tools: Allow overriding sysfs and proc finding with env var
perf tools: Consider header files outside perf directory in tags target
...
Carve out early cmdline parsing function into .../lib/cmdline.c so it
can be used by early code in the kernel proper as well.
Adapted from arch/x86/boot/cmdline.c.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1400525957-11525-2-git-send-email-bp@alien8.de
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Due to a typo the msr accessor function introduced in
22085a66c2 didn't have any lasting
effects because they accidentally wrote the old value back.
After c0a639ad0b this at the very least
this causes cpuid limits not to be lifted on some cpus leading to
missing capabilities for those.
Signed-off-by: Andres Freund <andres@anarazel.de>
Link: http://lkml.kernel.org/r/1399598957-7011-2-git-send-email-andres@anarazel.de
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
thunk/restore functions are also used for tracing irqoff etc.
and those are involved in kprobe's exception handling.
Prohibit probing on them to avoid kernel crash.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20140417081726.26341.3872.stgit@ltc230.yrl.intra.hitachi.co.jp
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Yann Droneaud