"msi_chip" isn't very descriptive, so rename it to "msi_controller". That
tells a little more about what it does and is already used in device tree
bindings.
No functional change.
[bhelgaas: changelog, change *only* the struct name so it's reviewable]
Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Add a struct pcie_host_ops .get_msi_data() method for platforms to return
their special MSI message data.
Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Mohit KUMAR <mohit.kumar@st.com>
The struct pcie_host_ops .get_msi_data() method returns the MSI message
address. To accurately express its purpose, rename it to .get_msi_addr().
Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Mohit KUMAR <mohit.kumar@st.com>
The struct pcie_port_info doesn't contain any exclusive information
compared to other elements of struct pcie_port. So, keeping a separate
structure does not seem very logical. Therefore remove this struct and
embed its elements directly into struct pcie_port.
Signed-off-by: Pratyush Anand <pratyush.anand@st.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Mohit Kumar <mohit.kumar@st.com>
This allows to explicitly specify the covered bus numbers in the
devicetree, which will come in handy once we see a SoC with more than one
PCIe host controller instance.
Previously the driver relied on the behavior of pci_scan_root_bus() to fill
in a range of 0x00-0xff if no valid range was found. We fall back to the
same range if no valid DT entry was found to keep backwards compatibility,
but now do it explicitly.
[bhelgaas: use %pR in error message to avoid duplication]
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Pratyush Anand <pratyush.anand@st.com>
Acked-by: Mohit Kumar <mohit.kumar@st.com>
The Keystone PCI controller is based on v3.65 DesignWare hardware. This
version differs from newer versions of the hardware in functional areas
discussed below that make it necessary to change dw_pcie_host_init() to
support v3.65 based PCI controller.
1. No support for ATU port. Any ATU-specific resource handling code is
to be bypassed for v3.65 h/w.
2. MSI controller uses application space to implement MSI and 32 MSI
interrupts are multiplexed over 8 IRQs to the host. Hence the code
to process MSI IRQ needs to be different. This patch allows
platform driver to provide its own irq_domain_ops ptr to
irq_domain_add_linear() through an API callback from the DesignWare
core driver.
3. MSI interrupt generation requires EP to write to the RC's
application register. So enhance the driver to allow setup of
inbound access to MSI IRQ register as a post scan bus API callback.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Pratyush Anand <pratyush.anand@st.com>
Acked-by: Mohit KUMAR <mohit.kumar@st.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
CC: Santosh Shilimkar <santosh.shilimkar@ti.com>
CC: Russell King <linux@arm.linux.org.uk>
CC: Grant Likely <grant.likely@linaro.org>
CC: Rob Herring <robh+dt@kernel.org>
CC: Jingoo Han <jg1.han@samsung.com>
CC: Richard Zhu <r65037@freescale.com>
CC: Kishon Vijay Abraham I <kishon@ti.com>
CC: Marek Vasut <marex@denx.de>
CC: Arnd Bergmann <arnd@arndb.de>
CC: Pawel Moll <pawel.moll@arm.com>
CC: Mark Rutland <mark.rutland@arm.com>
CC: Ian Campbell <ijc+devicetree@hellion.org.uk>
CC: Kumar Gala <galak@codeaurora.org>
CC: Randy Dunlap <rdunlap@infradead.org>
CC: Grant Likely <grant.likely@linaro.org>
DesignWare v3.65 hardware implements MSI controller registers in
application space. This requires updates to the DesignWare core to
support controllers based on this older hardware.
Add msi_irq_set()/clear() interfaces to allow Set/Clear MSI IRQ enable bit
in the application register. Also, v3.65 hardware uses the MSI_IRQ
register in application register space to raise MSI IRQ to the RC from EP.
Current code uses the standard mechanism as per PCI spec. So add
get_msi_data() to get the address of this register so common code can
work on both v3.65 and newer hardware.
[bhelgaas: changelog]
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Pratyush Anand <pratyush.anand@st.com>
Acked-by: Mohit Kumar <mohit.kumar@st.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
CC: Russell King <linux@arm.linux.org.uk>
CC: Grant Likely <grant.likely@linaro.org>
CC: Rob Herring <robh+dt@kernel.org>
CC: Richard Zhu <r65037@freescale.com>
CC: Kishon Vijay Abraham I <kishon@ti.com>
CC: Marek Vasut <marex@denx.de>
CC: Arnd Bergmann <arnd@arndb.de>
CC: Pawel Moll <pawel.moll@arm.com>
CC: Mark Rutland <mark.rutland@arm.com>
CC: Ian Campbell <ijc+devicetree@hellion.org.uk>
CC: Kumar Gala <galak@codeaurora.org>
CC: Randy Dunlap <rdunlap@infradead.org>
CC: Grant Likely <grant.likely@linaro.org>
DesignWare v3.65 hardware requires application space registers to be
configured to access the remote EP config space.
To support this, add rd_other_conf() and wr_other_conf() to pcie_host_ops.
[bhelgaas: changelog]
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Pratyush Anand <pratyush.anand@st.com>
Acked-by: Mohit Kumar <mohit.kumar@st.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
CC: Russell King <linux@arm.linux.org.uk>
CC: Grant Likely <grant.likely@linaro.org>
CC: Rob Herring <robh+dt@kernel.org>
CC: Richard Zhu <r65037@freescale.com>
CC: Kishon Vijay Abraham I <kishon@ti.com>
CC: Marek Vasut <marex@denx.de>
CC: Arnd Bergmann <arnd@arndb.de>
CC: Pawel Moll <pawel.moll@arm.com>
CC: Mark Rutland <mark.rutland@arm.com>
CC: Ian Campbell <ijc+devicetree@hellion.org.uk>
CC: Kumar Gala <galak@codeaurora.org>
CC: Randy Dunlap <rdunlap@infradead.org>
CC: Grant Likely <grant.likely@linaro.org>
In DRA7, the CPU sees 32-bit addresses, but the PCIe controller can see
only 28-bit addresses. So whenever the CPU issues a read/write request,
the 4 most significant bits are used by L3 to determine the target
controller. For example, the CPU reserves [mem 0x20000000-0x2fffffff]
for the PCIe controller but the PCIe controller will see only
[0x00000000-0x0fffffff]. For programming the outbound translation
window the *base* should be programmed as 0x00000000. Whenever we try to
write to, e.g., 0x20000000, it will be translated to whatever we have
programmed in the translation window with base as 0x00000000.
This is needed when the dt node is modelled something like this:
axi {
compatible = "simple-bus";
#size-cells = <1>;
#address-cells = <1>;
ranges = <0x0 0x20000000 0x10000000 // 28-bit bus
0x51000000 0x51000000 0x3000>;
pcie@51000000 {
reg = <0x1000 0x2000>, <0x51002000 0x14c>, <0x51000000 0x2000>;
reg-names = "config", "ti_conf", "rc_dbics";
#address-cells = <3>;
#size-cells = <2>;
ranges = <0x81000000 0 0 0x03000 0 0x00010000
0x82000000 0 0x20013000 0x13000 0 0xffed000>;
};
};
Here the CPU address for configuration space is 0x20013000 and the
controller address for configuration space is 0x13000. The controller
address should be used while programming the ATU (in order for translation
to happen properly in DRA7xx).
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mohit Kumar <mohit.kumar@st.com>
Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Cc: Jingoo Han <jg1.han@samsung.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Arnd Bergmann <arnd@arndb.de>
* pci/host-designware:
PCI: designware: Remove unnecessary use of 'conf_lock' spinlock
PCI: designware: Use new OF interrupt mapping when possible
PCI: designware: Fix iATU programming for cfg1, io and mem viewport
PCI: designware: Fix comment for setting number of lanes
* pci/host-imx6:
PCI: designware: Split Exynos and i.MX bindings
* pci/host-mvebu:
PCI: mvebu: Use '%pa' for printing 'phys_addr_t' type
PCI: mvebu: Remove unnecessary use of 'conf_lock' spinlock
PCI: mvebu: split PCIe BARs into multiple MBus windows when needed
bus: mvebu-mbus: allow several windows with the same target/attribute
bus: mvebu-mbus: Avoid setting an undefined window size
PCI: mvebu: fix off-by-one in the computed size of the mbus windows
* pci/host-tegra:
PCI: tegra: Use new OF interrupt mapping when possible
On i.MX6 the host controller MSI IRQ is shared with PCI legacy INTD. Make
sure we don't bail too early from the IRQ handler.
The issue is fairly theoretical as it would require a system setup with a
PCIe switch where one connected device is using legacy INTD and another one
using MSI, but better fix it now.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Richard Zhu <r65037@freescale.com>
Serialization of configuration accesses is provided by 'pci_lock' in
drivers/pci/access.c thus making the driver's 'conf_lock' superfluous.
Signed-off-by: Andrew Murray <amurray@embedded-bits.co.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Richard Zhu <r65037@freescale.com>
The cfg_read/write functions are DesignWare-specific. Add dw_pcie prefix
to avoid collision in global name space.
Tested-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Pratyush Anand <pratyush.anand@st.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Without irq_create_mapping(), the correct IRQ number cannot be
provided. In this case, it makes problems such as NULL dereference.
Thus, irq_create_mapping() should be added for MSI.
Suggested-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Pratyush Anand <pratyush.anand@st.com>
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The following variables and functions are used only in pcie-designware.c,
so make them static:
global_io_offset
dw_pcie_rd_own_conf()
dw_pcie_wr_own_conf()
dw_pcie_setup()
dw_pcie_scan_bus()
dw_pcie_map_irq()
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Exynos PCIe IP consists of Synopsys specific part and Exynos
specific part. Only core block is a Synopsys Designware part;
other parts are Exynos specific.
Also, the Synopsys Designware part can be shared with other
platforms; thus, it can be split two parts such as Synopsys
Designware part and Exynos specific part.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Pratyush Anand <pratyush.anand@st.com>
Cc: Mohit KUMAR <Mohit.KUMAR@st.com>
Yijing Wang