hard to merge by lines... (as here we have material differences between
32-bit and 64-bit mode) - will try to do it later.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Move the 32-bit and 64-bit gdt_page definitions next to each
other, separated with an #ifdef.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Make the files more similar in preparation to unification, no
code changed.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
64-bit has X86_HT set too, so use that instead of SMP.
This also removes a include/asm-x86/processor.h ifdef.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
1. add c_x86_vendor into cpu_dev
2. change cpu_devs to static
3. check c_x86_vendor before put that cpu_dev into array
4. remove alignment for 64bit
5. order the sequence in cpu_devs according to link sequence...
so could put intel at first, then amd...
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
v2: make 64 bit get c->x86_cache_alignment = c->x86_clfush_size
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
1. add extended_cpuid_level for 32bit
2. add generic_identify for 64bit
3. add early_identify_cpu for 32bit
4. early_identify_cpu not be called by identify_cpu
5. remove early in get_cpu_vendor for 32bit
6. add get_cpu_cap
7. add cpu_detect for 64bit
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Move early cpu initialization after cpu early get cap so the
early cpu initialization can fix up cpu caps.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The long noops ("NOPL") are supposed to be detected by family >= 6.
Unfortunately, several non-Intel x86 implementations, both hardware
and software, don't obey this dictum. Instead, probe for NOPL
directly by executing a NOPL instruction and see if we get #UD.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Uses xsave/xrstor (instead of traditional fxsave/fxrstor) in context switch
when available.
Introduces TS_XSAVE flag, which determine the need to use xsave/xrstor
instructions during context switch instead of the legacy fxsave/fxrstor
instructions. Thread-synchronous status word is already in L1 cache during
this code patch and thus minimizes the performance penality compared to
(cpu_has_xsave) checks.
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Enables xsave/xrstor by turning on cr4.osxsave on cpu's which have
the xsave support. For now, features that OS supports/enabled are
FP and SSE.
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
While examining holes in percpu section I found this :
c05f5000 D per_cpu__current_task
c05f5000 D __per_cpu_start
c05f5004 D per_cpu__cpu_number
c05f5008 D per_cpu__irq_regs
c05f500c d per_cpu__cpu_devices
c05f5040 D per_cpu__cyc2ns
<Big Hole of about 4000 bytes>
c05f6000 d per_cpu__cpuid4_info
c05f6004 d per_cpu__cache_kobject
c05f6008 d per_cpu__index_kobject
<Big Hole of about 4000 bytes>
c05f7000 D per_cpu__gdt_page
This is because gdt_page is a percpu variable, defined with
a page alignement, and linker is doing its job, two times because of .o
nesting in the build process.
I introduced a new macro DEFINE_PER_CPU_PAGE_ALIGNED() to avoid
wasting this space. All page aligned variables (only one at this time)
are put in a separate
subsection .data.percpu.page_aligned, at the very begining of percpu zone.
Before patch , on a x86_32 machine :
.data.percpu 30232 3227471872
.data.percpu 22168 3227471872
Thats 8064 bytes saved for each CPU.
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Move the scattered checks for PAT support to a single function. Its
moved to addon_cpuid_features.c as this file is shared between 32 and
64 bit.
Remove the manipulation of the PAT feature bit and just disable PAT in
the PAT layer, based on the PAT bit provided by the CPU and the
current CPU version/model white list.
Change the boot CPU check so it works on Voyager somewhere in the
future as well :) Also panic, when a secondary has PAT disabled but
the primary one has alrady switched to PAT. We have no way to undo
that.
The white list is kept for now to ensure that we can rely on known to
work CPU types and concentrate on the software induced problems
instead of fighthing CPU erratas and subtle wreckage caused by not yet
verified CPUs. Once the PAT code has stabilized enough, we can remove
the white list and open the can of worms.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
None of these files use any of the functionality promised by
asm/semaphore.h. It's possible that they rely on it dragging in some
unrelated header file, but I can't build all these files, so we'll have
fix any build failures as they come up.
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
store initial_apicid from early identify. it is could be different from
phys_proc_id later.
also print it out in /proc/cpuinfo.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Replace the hardcoded list of initialization functions for each CPU
vendor by a list in an ELF section, which is read at initialization in
arch/x86/kernel/cpu/cpu.c to fill the cpu_devs[] array. The ELF
section, named .x86cpuvendor.init, is reclaimed after boot, and
contains entries of type "struct cpu_vendor_dev" which associates a
vendor number with a pointer to a "struct cpu_dev" structure.
This first modification allows to remove all the VENDOR_init_cpu()
functions.
This patch also removes the hardcoded calls to early_init_amd() and
early_init_intel(). Instead, we add a "c_early_init" member to the
cpu_dev structure, which is then called if not NULL by the generic CPU
initialization code. Unfortunately, in early_cpu_detect(), this_cpu is
not yet set, so we have to use the cpu_devs[] array directly.
This patch is part of the Linux Tiny project, and is needed for
further patch that will allow to disable compilation of unused CPU
support code.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
> Diffing dmesg between git7 and git8 doesn't sched any light since
> git8 also removed the printouts of the x86 caps as they were being
> initialised and updated. I'm currently adding those printouts back
> in the hope of seeing where and when the caps get broken.
That turned out to be very illuminating:
--- dmesg-2.6.24-git7 2008-02-24 18:01:25.295851000 +0100
+++ dmesg-2.6.24-git8 2008-02-24 18:01:25.530358000 +0100
...
CPU: After generic identify, caps: 00000003 00000000 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After all inits, caps: 00000003 00000000 00000000 00000000 00000000 00000000 00000000 00000000
+CPU: After applying cleared_cpu_caps, caps: 00000013 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Notice how the TSC cap bit goes from Off to On.
(The first two lines are printout loops from -git7 forward-ported
to -git8, the third line is the same printout loop added just after
the xor-with-cleared_cpu_caps[] loop.)
Here's how the breakage occurs:
1. arch/x86/kernel/tsc_32.c:tsc_init() sees !cpu_has_tsc,
so bails and calls setup_clear_cpu_cap(X86_FEATURE_TSC).
2. include/asm-x86/cpufeature.h:setup_clear_cpu_cap(bit) clears
the bit in boot_cpu_data and sets it in cleared_cpu_caps
3. arch/x86/kernel/cpu/common.c:identify_cpu() XORs all caps
in with cleared_cpu_caps
HOWEVER, at this point c->x86_capability correctly has TSC
Off, cleared_cpu_caps has TSC On, so the XOR incorrectly
sets TSC to On in c->x86_capability, with disastrous results.
The real bug is that clearing bits with XOR only works if the
bits are known to be 1 prior to the XOR, and that's not true here.
A simple fix is to convert the XOR to AND-NOT instead. The following
patch does that, and allows my 486 to boot 2.6.25-rc kernels again.
[ mingo@elte.hu: fixed a similar bug in setup_64.c as well. ]
The breakage was introduced via commit 7d851c8d3d.
Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
cpu.h was already included everywhere needed.
Fixes following sparse warnings:
arch/x86/kernel/cpu/amd.c:343:12: warning: symbol 'amd_init_cpu' was not declared. Should it be static?
arch/x86/kernel/cpu/cyrix.c:444:12: warning: symbol 'cyrix_init_cpu' was not declared. Should it be static?
arch/x86/kernel/cpu/cyrix.c:456:12: warning: symbol 'nsc_init_cpu' was not declared. Should it be static?
arch/x86/kernel/cpu/centaur.c:467:12: warning: symbol 'centaur_init_cpu' was not declared. Should it be static?
arch/x86/kernel/cpu/transmeta.c:112:12: warning: symbol 'transmeta_init_cpu' was not declared. Should it be static?
arch/x86/kernel/cpu/intel.c:296:12: warning: symbol 'intel_cpu_init' was not declared. Should it be static?
arch/x86/kernel/cpu/nexgen.c:56:12: warning: symbol 'nexgen_init_cpu' was not declared. Should it be static?
arch/x86/kernel/cpu/umc.c:22:12: warning: symbol 'umc_init_cpu' was not declared. Should it be static?
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The casts will always be needed, may as well make them the right
signedness. The ebx variables can easily be unsigned, may as well.
arch/x86/kernel/cpu/common.c:261:21: warning: incorrect type in argument 2 (different signedness)
arch/x86/kernel/cpu/common.c:261:21: expected unsigned int *eax
arch/x86/kernel/cpu/common.c:261:21: got int *<noident>
arch/x86/kernel/cpu/common.c:262:9: warning: incorrect type in argument 3 (different signedness)
arch/x86/kernel/cpu/common.c:262:9: expected unsigned int *ebx
arch/x86/kernel/cpu/common.c:262:9: got int *<noident>
arch/x86/kernel/cpu/common.c:263:9: warning: incorrect type in argument 4 (different signedness)
arch/x86/kernel/cpu/common.c:263:9: expected unsigned int *ecx
arch/x86/kernel/cpu/common.c:263:9: got int *<noident>
arch/x86/kernel/cpu/common.c:264:9: warning: incorrect type in argument 5 (different signedness)
arch/x86/kernel/cpu/common.c:264:9: expected unsigned int *edx
arch/x86/kernel/cpu/common.c:264:9: got int *<noident>
arch/x86/kernel/cpu/common.c:293:30: warning: incorrect type in argument 3 (different signedness)
arch/x86/kernel/cpu/common.c:293:30: expected unsigned int *ebx
arch/x86/kernel/cpu/common.c:293:30: got int *<noident>
arch/x86/kernel/cpu/common.c:350:22: warning: incorrect type in argument 2 (different signedness)
arch/x86/kernel/cpu/common.c:350:22: expected unsigned int *eax
arch/x86/kernel/cpu/common.c:350:22: got int *<noident>
arch/x86/kernel/cpu/common.c:351:10: warning: incorrect type in argument 3 (different signedness)
arch/x86/kernel/cpu/common.c:351:10: expected unsigned int *ebx
arch/x86/kernel/cpu/common.c:351:10: got int *<noident>
arch/x86/kernel/cpu/common.c:352:10: warning: incorrect type in argument 4 (different signedness)
arch/x86/kernel/cpu/common.c:352:10: expected unsigned int *ecx
arch/x86/kernel/cpu/common.c:352:10: got int *<noident>
arch/x86/kernel/cpu/common.c:353:10: warning: incorrect type in argument 5 (different signedness)
arch/x86/kernel/cpu/common.c:353:10: expected unsigned int *edx
arch/x86/kernel/cpu/common.c:353:10: got int *<noident>
arch/x86/kernel/cpu/common.c:362:30: warning: incorrect type in argument 3 (different signedness)
arch/x86/kernel/cpu/common.c:362:30: expected unsigned int *ebx
arch/x86/kernel/cpu/common.c:362:30: got int *<noident>
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Because in i386 early boot stage, boot_cpu_data may be not available,
which makes clflush_cach_range() into infinite loop, which is called
by change_page_attr(). This patch fixes this by setting
boot_cpu_data.x86_clflush_size in early_cpu_detect().
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
get more testing of the c_p_a() code done by not turning off
PSE on DEBUG_PAGEALLOC.
this simplifies the early pagetable setup code, and tests
the largepage-splitup code quite heavily.
In the end, all the largepages will be split up pretty quickly,
so there's no difference to how DEBUG_PAGEALLOC worked before.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
when MTRRs are not covering the whole e820 table, we need to trim the
RAM and need to update e820.
reuse some code on 64-bit as well.
here need to add early_get_cap and use it in early_cpu_detect, and move
mtrr_bp_init early.
The code successfully trimmed the memory map on Justin's system:
from:
[ 0.000000] BIOS-e820: 0000000100000000 - 000000022c000000 (usable)
to:
[ 0.000000] modified: 0000000100000000 - 0000000228000000 (usable)
[ 0.000000] modified: 0000000228000000 - 000000022c000000 (reserved)
According to Justin it makes quite a difference:
| When I boot the box without any trimming it acts like a 286 or 386,
| takes about 10 minutes to boot (using raptor disks).
Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Tested-by: Justin Piszcz <jpiszcz@lucidpixels.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Add a generic option to clear any cpuid bit. I added it because it was
very easy to add with the new generic cpuid disable bitmap and perhaps
it will be useful in the future.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To disable CLFLUSH usage, especially in change_page_attr().
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Modern 32bit userland doesn't even boot when the TSC is disabled
because ld.so tends to contain RDTSCs. So make notsc only effective for the
kernel, similar to 64bit.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This convers nofxsr, mem=nopentium and nosep to use the new
generic cpuid disable bitmap instead of using own variables.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
There are already various options to disable specific cpuid bits
on the command line. They all use their own variable. Add a generic
mask to make this easier in the future.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Previously it was only run for Intel CPUs, but AMD Fam10h implements MWAIT too.
This matches 64bit behaviour.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
I don't know of any case where they have been useful and they look ugly.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Need this in the next patch in time_init and that happens early.
This includes a minor fix on i386 where early_intel_workarounds()
[which is now called early_init_intel] really executes early as
the comments say.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Yinghai Lu