We are motivated to avoid using a bitfield for obj->active for a couple
of reasons. Firstly, we wish to document our lockless read of obj->active
using READ_ONCE inside i915_gem_busy_ioctl() and that requires an
integral type (i.e. not a bitfield). Secondly, gcc produces abysmal code
when presented with a bitfield and that shows up high on the profiles of
request tracking (mainly due to excess memory traffic as it converts
the bitfield to a register and back and generates frequent AGI in the
process).
v2: BIT, break up a long line in compute the other engines, new paint
for i915_gem_object_is_active (now i915_gem_object_get_active).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470324762-2545-23-git-send-email-chris@chris-wilson.co.uk
Rather than a mismash of struct drm_device *dev and struct
drm_i915_private *dev_priv being used freely within a function, be
consistent and only pass along dev_priv.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470324762-2545-22-git-send-email-chris@chris-wilson.co.uk
The individual bits inside obj->frontbuffer_bits are protected by each
plane->mutex, but the whole bitfield may be accessed by multiple KMS
operations simultaneously and so the RMW need to be under atomics.
However, for updating the single field we do not need to mandate that it
be under the struct_mutex, one more step towards its removal as the de
facto BKL.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470324762-2545-21-git-send-email-chris@chris-wilson.co.uk
We only need a very lightweight mechanism here as the locking is only
used for co-ordinating a bitfield.
v2: Move the cheap unlikely tests into the caller
v3: Move the kerneldoc into the header (now separated out into
intel_fronbuffer.h for better kerneldoc and readability)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtien <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1470324762-2545-20-git-send-email-chris@chris-wilson.co.uk
In view of adding inline functions into the intel_frontbuffer section,
we first split the header into its own file so that we can integrate it
more easily with kerneldoc.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1470324762-2545-19-git-send-email-chris@chris-wilson.co.uk
Since i915_gem_obj_ggtt_pin() is an idiom breaking curry function for
i915_gem_object_ggtt_pin(), spare us the confusion and remove it.
Removing it now simplifies later patches to change the i915_vma_pin()
(and friends) interface.
v2: Add a redundant GEM_BUG_ON(!view) to
i915_gem_obj_lookup_or_create_ggtt_vma()
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470324762-2545-18-git-send-email-chris@chris-wilson.co.uk
Not only is i915_vma_pin() called for every single object on every single
execbuf, it is usually a simple increment as the VMA is already bound for
execution by the GPU. Rearrange the tests for unbound and pin_count
overflow so that we can do the increment and test very cheaply and
compact enough to inline the operation into execbuf. The trick used is
to note that we can check for an overflow bit (keeping space available
for it inside the flags) at the same time as checking the binding bits.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470324762-2545-17-git-send-email-chris@chris-wilson.co.uk
In preparation to perform some magic to speed up i915_vma_pin(), which
is among the hottest of hot paths in execbuf, refactor all the bitfields
accessed by i915_vma_pin() into a single unified set of flags.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470324762-2545-16-git-send-email-chris@chris-wilson.co.uk
During execbuffer we look up the i915_vma in order to reserve them in
the VM. However, we then do a double lookup of the vma in order to then
pin them, all because we lack the necessary interfaces to operate on
i915_vma - so introduce i915_vma_pin()!
v2: Tidy parameter lists to remove one level of redirection in the hot
path.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470324762-2545-15-git-send-email-chris@chris-wilson.co.uk
For consistency, internal functions should take drm_i915_private rather
than drm_device. Now that we are subclassing drm_device, there are no
more size wins, but being consistent is its own blessing.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470324762-2545-12-git-send-email-chris@chris-wilson.co.uk
In order to be consistent with other address space functions, we want to
pass around 64-bit sizes, even though all known global GTT are limited
to 4GiB. Similarly, we are trying to be consistent in using the _ggtt_
nomenclature when referring to the special global GTT.
v2: Update docs to consistently state "global GTT".
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470324762-2545-11-git-send-email-chris@chris-wilson.co.uk
As we always allocate in chunks of 4096 (that being both the PAGE_SIZE
and our own GTT_PAGE_SIZE), we know that all results from the drm_mm are
aligned to at least 4096. The drm_mm allocator itself is optimised for
alignment == 0, and so by converting alignments of 4096 to 0 we can
satisfy our own requirements and still hit the faster path.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470324762-2545-10-git-send-email-chris@chris-wilson.co.uk
Our GPUs impose certain requirements upon buffers that depend upon how
exactly they are used. Typically this is expressed as that they require
a larger surface than would be naively computed by pitch * height.
Normally such requirements are hidden away in the userspace driver, but
when we accept pointers from strangers and later impose extra conditions
on them, the original client allocator has no idea about the
monstrosities in the GPU and we require the userspace driver to inform
the kernel how many padding pages are required beyond the client
allocation.
v2: Long time, no see
v3: Try an anonymous union for uapi struct compatibility
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470324762-2545-7-git-send-email-chris@chris-wilson.co.uk
This is not the full fix, as we are required to percolate the u64 nature
down through the drm_mm stack, but this is required now to prevent
explosions due to mismatch between execbuf (eb_vma_misplaced) and vma
binding (i915_vma_misplaced) - and reduces the risk of spurious changes
as we adjust the vma interface in the next patches.
v2: long long casts not required for u64 printk (%llx)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470324762-2545-6-git-send-email-chris@chris-wilson.co.uk
Move the single line to the callsite as the name is now misleading, and
the purpose is solely to add the request to the execution queue. Here,
we can see that if we failed to dispatch the batch from the request, we
can forgo flushing the GPU when closing the request.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470324762-2545-5-git-send-email-chris@chris-wilson.co.uk
This reimplements the denial-of-service protection against igt from
commit 227f782e46 ("drm/i915: Retire requests before creating a new
one") and transfers the stall from before each batch into get_pages().
The issue is that the stall is increasing latency between batches which
is detrimental in some cases (especially coupled with execlists) to
keeping the GPU well fed. Also we have made the observation that retiring
requests can of itself free objects (and requests) and therefore makes
a good first step when shrinking.
v2: Recycle objects prior to i915_gem_object_get_pages()
v3: Remove the reference to the ring from i915_gem_requests_ring() as it
operates on an intel_engine_cs.
v4: Since commit 9b5f4e5ed6 ("drm/i915: Retire oldest completed request
before allocating next") we no longer need the safeguard to retire
requests before get_pages(). We no longer see the huge latencies when
hitting the shrinker between allocations.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470324762-2545-4-git-send-email-chris@chris-wilson.co.uk
We should not rely on obj->active being uptodate unless we manually
flush it. Instead, we can verify that the next available batch object is
idle by looking at its last active request (and checking it for
completion).
v2: remove the struct drm_device forward declaration added in the
process of removing its necessity
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470324762-2545-3-git-send-email-chris@chris-wilson.co.uk
Slight micro-optimise to produce combine loops so that gcc is able to
optimise the inner-loops concisely. Since we are reviewing the loops, we
can update the comments to describe the current state of affairs, in
particular the distinction between evicting from the global GTT (which
may contain untracked items and transient global pins) and the
per-process GTT.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470324762-2545-1-git-send-email-chris@chris-wilson.co.uk
On Haswell/Broadwell, the HD-Audio block is inside the HDMI/display
power well and so the sna-hda audio codec acquires the display power
well while it is operational. However, Skylake separates the powerwells
again, but yet we still need the audio powerwell to setup the registers.
(But then the hardware uses those registers even while powered off???)
Acquiring the powerwell around setting the chicken bits when setting up
the audio channel does at least silence the WARNs from touching our
registers whilst unpowered. We silence our own test cases, but maybe
there is a latent bug in using the audio channel?
v2: Grab both rpm wakelock and audio wakelock
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96214
Fixes: 03b135cebc "ALSA: hda - remove dependency on i915 power well for SKL")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Libin Yang <libin.yang@intel.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Marius Vlad <marius.c.vlad@intel.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Cc: stable@vger.kernel.org
Link: http://patchwork.freedesktop.org/patch/msgid/1470240540-29004-1-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
My ASUS PB278 at least doesn't seem to appreciate when you try to
ack sink irqs when there are none. Results in this sort of dmesg spam
[drm:drm_dp_dpcd_access] too many retries, giving up
Let's skip the ack if there are no pending irqs. I have no clue why we
do this in two places. One of them likely should just go away. Oh, and
MST has its own sink irq handler too...
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1469717448-4297-12-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
No need to iterate the rates array in intel_dp_max_link_rate(). We know
the max rate will be the last entry, and we already know the size.
Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Cc: Jim Bride <jim.bride@linux.intel.com>
Cc: Manasi D Navare <manasi.d.navare@intel.com>
Cc: Durgadoss R <durgadoss.r@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1469717448-4297-10-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
With HSW + Dell UP2414Q (at least) drm_probe_ddc() occasionally fails,
and then we'll assume that the entire display has been disconnected.
We don't need the EDID from the main link, so we can simply check if
the sink is MST capable, and if so treat is as connected.
v2: Skip drm_probe_ddc() entirely for MST (Daniel)
Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Cc: Jim Bride <jim.bride@linux.intel.com>
Cc: Manasi D Navare <manasi.d.navare@intel.com>
Cc: Durgadoss R <durgadoss.r@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1469800276-6979-1-git-send-email-ville.syrjala@linux.intel.com
s/active_mst_links/active_streams/ and use it also for SST. We can then
use this information in the hpd handling to see if the link is active
or not, and thus whether we may need to retrain.
Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Cc: Jim Bride <jim.bride@linux.intel.com>
Cc: Manasi D Navare <manasi.d.navare@intel.com>
Cc: Durgadoss R <durgadoss.r@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1469717448-4297-6-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We can't mix MST with SST/HDMI on the same physical port, so we'll need
to reject such configurations in check_digital_port_conflicts(). Nothing
else will prevent this as MST has its fake encoders and its own connectors
so the cloning checks won't catch this.
The same digital port can be used multiple times, but only if all the
encoders involved are MST encoders, so we only want to check MST vs.
SST/HDMI, not MST vs. MST. And SST/HDMI vs. SST/HDMI we already check.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1469717448-4297-5-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The MST vs. SST selection should depend purely on the choice of the
connector/encoder. So don't try to determine the correct DDI mode
based on the intel_dp->is_mst, which simply tells us whether the sink
is in MST mode or not. Instead derive the information from the encoder
type. Since the link training code deals in non-fake encoders, we'll
also need to keep a second copy of that information around, which we'll
now designate as 'link_mst'.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1469717448-4297-4-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Currently we re-read a bunch of static eDP panel caps from the DPCD
over and over again. Let's do it only once to save some time and effort.
v2: Make thing less confusing with intel_edp_init_dpcd() (Chris)
Move no_aux_handshake setup in there as well
v3: Move tps3/rate printout to intel_dp_long_pulse() so that
we'll still get them on eDP as well
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1)
Link: http://patchwork.freedesktop.org/patch/msgid/1469800359-7087-1-git-send-email-ville.syrjala@linux.intel.com
Joonas spotted a discrepancy between the pwrite and pread ioctls, in
that pwrite takes the rpm wakelock around its GGTT access, The wakelock
is required in order for the GTT to function. In disregard for the
current convention, we take the rpm wakelock around the access itself
rather than around the struct_mutex as the nesting is not strictly
required and such ordering will one day be fixed by explicitly noting
the barrier dependencies between the GGTT and rpm.
Fixes: b50a53715f ("drm/i915: Support for pread/pwrite ...")
Reported-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ankitprasad Sharma <ankitprasad.r.sharma@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: drm-intel-fixes@lists.freedesktop.org
Link: http://patchwork.freedesktop.org/patch/msgid/1470298193-21765-1-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Erratum SKL075: Display Flicker May Occur When Both VT-d And FBC Are Enabled
"Display flickering may occur when both FBC (Frame Buffer Compression)
and VT - d (Intel® Virtualization Technology for Directed I/O) are enabled
and in use by the display controller."
Ville found the w/a name in the database:
WaFbcTurnOffFbcWhenHyperVisorIsUsed:skl,bxt and also dug out that it
affects Broxton.
v2: Log when the quirk is applied.
v3: Ensure i915.enable_fbc is false when !HAS_FBC()
v4: Fix function name after rebase
v5: Add Broxton to the workaround
Note for backporting to stable, we need to add
#define mkwrite_device_info(ptr) \
((struct intel_device_info *)INTEL_INFO(ptr))
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org
Link: http://patchwork.freedesktop.org/patch/msgid/1470296633-20388-1-git-send-email-chris@chris-wilson.co.uk
Since commit de1add3605 ("drm/i915: Decouple execbuf uAPI from internal
implementation") the index of the engine (its engine->id) in the
internal list no longer matches the hardware id. However, in a couple of
locations we missed fixing up the difference. In this case,
RING_FAULT_REG() refers to engine->id which is now not what the register
offset actually should be. Fortunately, in both case we should be more
or less looping over 0..I915_NUM_ENGINES.
Fixes: de1add3605 ("drm/i915: Decouple execbuf uAPI from internal...")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1469643077-2523-2-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: stable@vger.kernel.org
This reverts commit e9f24d5fb7.
The patch was only a stop-gap measure that fixed half the problem - the
leak of the fbcon when restarting X. A complete solution required
releasing the VMA when the object itself was closed rather than rely on
file/process exit. The previous patches add the VMA tracking necessary
to do close them along with the object, context or file, and so the time
has come to remove the partial fix.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470293567-10811-28-git-send-email-chris@chris-wilson.co.uk
When the user closes the context mark it and the dependent address space
as closed. As we use an asynchronous destruct method, this has two
purposes. First it allows us to flag the closed context and detect
internal errors if we to create any new objects for it (as it is removed
from the user's namespace, these should be internal bugs only). And
secondly, it allows us to immediately reap stale vma.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470293567-10811-27-git-send-email-chris@chris-wilson.co.uk
In order to prevent a leak of the vma on shared objects, we need to
hook into the object_close callback to destroy the vma on the object for
this file. However, if we destroyed that vma immediately we may cause
unexpected application stalls as we try to unbind a busy vma - hence we
defer the unbind to when we retire the vma.
v2: Keep vma allocated until closed. This is useful for a later
optimisation, but it is required now in order to handle potential
recursion of i915_vma_unbind() by retiring itself.
v3: Comments are important.
Testcase: igt/gem_ppggtt/flink-and-close-vma-leak
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470293567-10811-26-git-send-email-chris@chris-wilson.co.uk
Hook the vma itself into the i915_gem_request_retire() so that we can
accurately track when a solitary vma is inactive (as opposed to having
to wait for the entire object to be idle). This improves the interaction
when using multiple contexts (with full-ppgtt) and eliminates some
frequent list walking when retiring objects after a completed request.
A side-effect is that we get an active vma reference for free. The
consequence of this is shown in the next patch...
v2: Update inline names to be consistent with
i915_gem_object_get_active()
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470293567-10811-25-git-send-email-chris@chris-wilson.co.uk
This patch is broken out of the next just to remove the code motion from
that patch and make it more readable. What we do here is move the
i915_vma_move_to_active() to i915_gem_execbuffer.c and put the three
stages (read, write, fenced) together so that future modifications to
active handling are all located in the same spot. The importance of this
is so that we can more simply control the order in which the requests
are place in the retirement list (i.e. control the order at which we
retire and so control the lifetimes to avoid having to hold onto
references).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470293567-10811-24-git-send-email-chris@chris-wilson.co.uk
If the object is active and we need to perform a relocation upon it, we
need to take the slow relocation path. Before we do, double check the
active requests to see if they have completed.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470293567-10811-22-git-send-email-chris@chris-wilson.co.uk
If the user floods the GPU with so many requests that the engine stalls
waiting for free space, don't automatically promote the GPU to maximum
frequencies. If the GPU really is saturated with work, it will migrate
to high clocks by itself, otherwise it is merely a user flooding us with
busy-work.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470293567-10811-20-git-send-email-chris@chris-wilson.co.uk
By tracking each request occupying space inside an individual
intel_ring, we can greatly simplify the logic of tracking available
space and not worry about other timelines. (Each ring is an ordered
timeline of committed requests.)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470293567-10811-17-git-send-email-chris@chris-wilson.co.uk
With the introduction of requests, we amplified the number of atomic
refcounted objects we use and update every execbuffer; from none to
several references, and a set of references that need to be changed. We
also introduced interesting side-effects in the order of retiring
requests and objects.
Instead of independently tracking the last request for an object, track
the active objects for each request. The object will reside in the
buffer list of its most recent active request and so we reduce the kref
interchange to a list_move. Now retirements are entirely driven by the
request, dramatically simplifying activity tracking on the object
themselves, and removing the ambiguity between retiring objects and
retiring requests.
Furthermore with the consolidation of managing the activity tracking
centrally, we can look forward to using RCU to enable lockless lookup of
the current active requests for an object. In the future, we will be
able to query the status or wait upon rendering to an object without
even touching the struct_mutex BKL.
All told, less code, simpler and faster, and more extensible.
v2: Add a typedef for the function pointer for convenience later.
v3: Make the noop retirement callback explicit. Allow passing NULL to
the init_request_active() which is expanded to a common noop function.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470293567-10811-16-git-send-email-chris@chris-wilson.co.uk
Since we track requests, and requests are always added to the GPU fully
formed, we never have to flush the incomplete request and know that the
given request will eventually complete without any further action on our
part.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470293567-10811-15-git-send-email-chris@chris-wilson.co.uk
Chris Wilson