Make vb2_ops const as they are only stored in the const field of a
vb2_queue structure. Make the declarations const too.
Done using Coccinelle.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Make this const as it is only used in a copy operation in the file
referencing it. Make the declaration const too.
Done using Coccinelle.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Make this const as it is only passed to the const argument of the
function videobuf_queue_sg_init in the file referencing it.
Also, make the declaration in the header const.
Structure found using Coccinelle and changes done by hand.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Instead of using an integer to represent it, use boolean,
as this better describes what this field really means.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The help text should be indented by at least two spaces after the
'help' separator. This is both good practice and the media_build system
for building media drivers makes this assumption.
I went through all Kconfigs under drivers/media and fixed any bad help
sections. This makes it conform to the common practice and should fix
problems with 'make menuconfig' when using media_build. This is due to
a "WARNING" message that media_build can insert in the Kconfig and that
assumes the help text is indented by at least two spaces. If not, then the
Kconfig becomes invalid and 'make menuconfig' fails.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reported-by: Thomas Kaiser <linux-dvb@kaiser-linux.li>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
In the distant past the adv7604 driver used private controls. In order
to access them the v4l-subdevX nodes were needed. Later the is_private
tag was removed in the adv7604 driver and the need for v4l-subdevX
device nodes disappeared.
Remove the creation of those device nodes from this driver.
Note: the cobalt card is only used inside Cisco and we never actually
used the v4l-subdevX nodes for anything. So this API change can be done
safely without breaking anything.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The script "checkpatch.pl" pointed information out like the following.
ERROR: do not use assignment in if condition
Thus fix the affected source code place.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The script "checkpatch.pl" pointed information out like the following.
ERROR: do not use assignment in if condition
Thus fix the affected source code places.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Don't populate the array buf on the stack, instead make it static.
Makes the object code smaller by over 240 bytes:
Before:
text data bss dec hex filename
21689 22992 416 45097 b029 cx23885-cards.o
After:
text data bss dec hex filename
21348 23088 416 44852 af34 cx23885-cards.o
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The error handling paths all end up with retval being non-zero,
so the check for retval being zero is always false and hence
is redundant. Remove it.
Detected by CoverityScan CID#1309479 ("Logically dead code")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Make these const as they are only used in a copy operation.
Done using Coccinelle.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The script “checkpatch.pl” pointed information out like the following.
Comparison to NULL could be written !…
Thus fix the affected source code places.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Replace the specification of a data structure by a pointer dereference
as the parameter for the operator "sizeof" to make the corresponding size
determination a bit safer according to the Linux coding style convention.
This issue was detected by using the Coccinelle software.
[mchehab@s-opensoure.com: merge similar patches into one]
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
The variables will be set to an appropriate value before usage.
Thus omit the explicit initialisation at the beginning.
[mchehab@s-opensource.com: fold similar patches into one]
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Omit an extra message for a memory allocation failure in this function.
This issue was detected by using the Coccinelle software.
[mchehab@s-opensource.com: fold several similar patches into one]
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Pull more set_fs removal from Al Viro:
"Christoph's 'use kernel_read and friends rather than open-coding
set_fs()' series"
* 'work.set_fs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: unexport vfs_readv and vfs_writev
fs: unexport vfs_read and vfs_write
fs: unexport __vfs_read/__vfs_write
lustre: switch to kernel_write
gadget/f_mass_storage: stop messing with the address limit
mconsole: switch to kernel_read
btrfs: switch write_buf to kernel_write
net/9p: switch p9_fd_read to kernel_write
mm/nommu: switch do_mmap_private to kernel_read
serial2002: switch serial2002_tty_write to kernel_{read/write}
fs: make the buf argument to __kernel_write a void pointer
fs: fix kernel_write prototype
fs: fix kernel_read prototype
fs: move kernel_read to fs/read_write.c
fs: move kernel_write to fs/read_write.c
autofs4: switch autofs4_write to __kernel_write
ashmem: switch to ->read_iter
This ioctl is not implemented at dst_ca driver. There's just
a boilerplate code there. Remove it, as it is unlikely that
anyone would implement it those days.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Right now, on several places, the driver is returning a
"-1" error to userspace, instead of a proper error code.
Fix it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This ioctl seems to be some attempt to support a feature
at the bt8xx dst_ca driver. Yet, as said there, it
"needs more work". Right now, the code there is just
a boilerplate.
At the end of the day, no driver uses this ioctl, nor it is
documented anywhere (except for "needs more work").
So, get rid of it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Using typedefs inside the Kernel is against CodingStyle, and
there's no good usage here.
Just like we did at frontend.h, at commit 0df289a209 ("[media] dvb:
Get rid of typedev usage for enums"), let's keep those typedefs only
to provide userspace backward compatibility.
No functional changes.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Use proper ssize_t and size_t types for the return value and count
argument, move the offset last and make it an in/out argument like
all other read/write helpers, and make the buf argument a void pointer
to get rid of lots of casts in the callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Add two new model numbers to suppress this message in kernel log:
cx23885: cx23885[0]: warning: unknown hauppauge model #121029
Add these model numbers:
* Model 121019 - WinTV-HVR4400
* Model 121029 - WinTV-HVR5500
For WinTV-HVR4400 the documentation and my hardware differ:
Documentation says it supports DVB-S/S2 and DVB-T,
but my hardware also supports DVB-C.
Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Make this const as it is only stored in a const field of a
video_device structure.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Make these const as they are either used during a copy operation or
passed to a const argument of the function cx88_vdev_init.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Fix several
drivers/media/pci/ddbridge/ddbridge-core.c: warning: symbol ... was not declared. Should it be static?
drivers/media/pci/ddbridge/ddbridge-core.c: warning: Using plain integer as NULL pointer
drivers/media/pci/ddbridge/ddbridge-io.h: warning: cast removes address space of expression
drivers/media/pci/ddbridge/ddbridge-io.h: warning: incorrect type in argument 1 (different address spaces)
at multiple places.
Cc: Ralph Metzler <rjkm@metzlerbros.de>
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Brought to attention by Matthias Schwarzott <zzam@gentoo.org> by fixing
possible use-after-free faults in some demod drivers:
In ddb_input_detach(), the i2c_client is unregistered and removed before
dvb frontends are unregistered and detached. While no use-after-free issue
was observed so far, there is another issue with this:
dvb->attached keeps track of the state of the input/output registration,
and the i2c_client unregistration takes place only if everything was
successful (dvb->attached == 0x31). If for some reason an error occurred
during the frontend setup, that value stays at 0x20. In the following
error handling and cleanup, ddb_input_detach() will skip down to that
state, leaving the i2c_client registered, causing refcount issues.
Fix this by moving the i2c_client deregistration down to case 0x20.
Cc: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
videobuf_queue_ops are not supposed to change at runtime. All functions
working with videobuf_queue_ops provided by <media/videobuf-core.h> work
with const videobuf_queue_ops. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Make this const as it is only used in a copy operation.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Make this const as it is only used in a copy operation.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Make these const as they are only used in a copy operation.
Done using Coccinelle
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
RC_TYPE is confusing and it's just the protocol. So rename it.
Suggested-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Sean Young <sean@mess.org>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Any protocol for which we have a software decoder, can be enabled. Without
this only the loaded protocol decoders can be selected.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Since commit 12749b198fa4 ("[media] rc: saa7134: add trailing space for
timely decoding"), the workaround of inserting reset events is no
longer needed.
Note that the initial reset is not needed either; other rc-core drivers
that don't use ir_raw_event_store_edge() never call this at all.
Verified on a HVR-1150 and Raspberry Pi.
Fixes: 3f5c4c7332 ("[media] rc: fix ghost keypresses with certain hw")
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The gpio-ir-recv driver adds timeouts which the saa7134 lacks; this
causes keypress not to arrive, and to only arrive once more IR is
received. This is what the commit below calls "ghost keypresses",
and that commit does not solve the issue completely.
This makes the IR on the HVR-1150 much more reliable and responsive.
Fixes: 3f5c4c7332 ("[media] rc: fix ghost keypresses with certain hw")
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The gpio-ir-recv driver does many wakeups (once per edge); the saa7134
driver has special handling to only wakeup 15ms after the first edge.
Make this part of rc-core so gpio-ir-recv also benefits from
this (so a rc-5 keypress now causes 3 wakeups rather than 24).
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
When an ir-spi is registered, you get this message.
rc rc0: Unspecified device as /devices/platform/soc/3f215080.spi/spi_master/spi32766/spi32766.128/rc/rc0
"Unspecified device" refers to input_name, which makes no sense for IR
TX only devices. So, rename to device_name.
Also make driver_name const char* so that no casts are needed anywhere.
Now ir-spi reports:
rc rc0: IR SPI as /devices/platform/soc/3f215080.spi/spi_master/spi32766/spi32766.128/rc/rc0
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The first argument of function snd_ctl_new1 is of type const struct
snd_kcontrol_new * but in this file the variable is passed by value
to this function. This generated ""incompatible type for argument"
error. So, pass the variable by reference.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The first argument of function snd_ctl_new1 is of type const struct
snd_kcontrol_new * but in this file the variable is passed by value to
this function.
This generated ""incompatible type for argument" error. So, pass the
variable by reference.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Make this const as it is only used during a copy operation.
Done using Coccinelle.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Make this const as it only passed as the 1st argument to the function
snd_ctl_new1, which is of type const.
Done using Coccinelle.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
These videobuf_queue_ops structures are only passed as the second
argument to videobuf_queue_vmalloc_init, which is declared as const.
Thus the videobuf_queue_ops structures themselves can be const.
Done with the help of Coccinelle.
// <smpl>
@r disable optional_qualifier@
identifier i;
position p;
@@
static struct videobuf_queue_ops i@p = { ... };
@ok1@
identifier r.i;
expression e1;
position p;
@@
videobuf_queue_vmalloc_init(e1,&i@p,...)
@bad@
position p != {r.p,ok1.p};
identifier r.i;
struct videobuf_queue_ops e;
@@
e@i@p
@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
struct videobuf_queue_ops i = { ... };
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This v4l2_audio structure is only copied into other structures,
so it can be const.
Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Make these const as they are only used during a copy operation.
Done using Coccinelle.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
drivers/media/pci/ddbridge/ddbridge-core.c: In function 'ddb_port_attach':
drivers/media/pci/ddbridge/ddbridge-core.c:2261:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (ret < 0)
^
drivers/media/pci/ddbridge/ddbridge-core.c:2263:2: note: here
case DDB_PORT_LOOP:
^~~~
drivers/media/pci/ddbridge/ddbridge-core.c: In function 'dvb_input_attach':
drivers/media/pci/ddbridge/ddbridge-core.c:1492:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (input->port->dev->link[input->port->lnr].info->ts_quirks &
^
drivers/media/pci/ddbridge/ddbridge-core.c:1497:2: note: here
case DDB_TUNER_DVBCT2_SONY_P:
^~~~
drivers/media/pci/ddbridge/ddbridge-core.c:1516:9: warning: this statement may fall through [-Wimplicit-fallthrough=]
osc24 = 1;
~~~~~~^~~
drivers/media/pci/ddbridge/ddbridge-core.c:1517:2: note: here
case DDB_TUNER_DVBCT2_SONY:
^~~~
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
These structures are only copied into other structures, so
they can be const.
Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
All data is accessed RO, so mark everything const. Some vars in several
functions aswell as function signatures also require the const keyword
now, they're also added by this commit.
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Since the DD hardware info and maps aren't needed anymore outside of
ddbridge-hw.c (they're returned via get_ddb_info() now), mark them
static and remove all refs from ddbridge-hw.h.
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
adapter_alloc is only used from within ddbridge-core, so move it there,
this removes the need for prototyping/referencing the variable. While at
it, msi isn't needed outside of ddbridge-main, so don't extref that one
aswell.
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This further cleans up ddbridge-main from hardware-related data and moves
the exact card type determination into ddbridge-hw.c:get_ddb_info(), right
to the hardware maps/structs. Also, const'ify more structs and pointers.
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Force gap setting if given by attribute and enable gap for older regmaps.
Also, setting a gap value of 128 via sysfs will now disable gap.
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Picked up code parts introduced one smatch error:
drivers/media/pci/ddbridge/ddbridge-maxs8.c:163 max_set_input_unlocked() error: buffer overflow 'dev->link[port->lnr].lnb.voltage' 4 <= 255
Fix this by clamping the .lnb.voltage array access to 0-3 by "& 3"'ing
dvb->input.
Cc: Ralph Metzler <rjkm@metzlerbros.de>
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This enables MaxS4/S8 and Octopus Max card support in ddbridge by adding
glue code into ddbridge-core, having another PCI ID, and have the LNB IC
control code (and all other MaxS4/8 related code) in ddbridge-maxs8.c
(rather than another ~400 LoC in ddbridge-core.c like it's done in the
original vendor driver package).
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
It is known that MSI interrupts - while working quite well so far - can
still cause issues on some hardware platforms (causing I2C timeouts due
to unhandled interrupts). The msi variable/option is set to 1 by default.
So, add a Kconfig option prefixed with "EXPERIMENTAL" that will control
the default value of that modparam, defaulting to off for a better
user experience and (guaranteed) stable operation "per default".
Cc: Ralph Metzler <rjkm@metzlerbros.de>
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Tested-by: Richard Scobie <r.scobie@clear.net.nz>
Tested-by: Jasmin Jessich <jasmin@anw.at>
Tested-by: Dietmar Spingler <d_spingler@freenet.de>
Tested-by: Manfred Knick <Manfred.Knick@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Both ts_release() and ts_open() can use "output" before check (smatch):
drivers/media/pci/ddbridge/ddbridge-core.c:816 ts_release() warn: variable dereferenced before check 'output' (see line 809)
drivers/media/pci/ddbridge/ddbridge-core.c:836 ts_open() warn: variable dereferenced before check 'output' (see line 828)
Fix by performing checks on those pointers.
Cc: Ralph Metzler <rjkm@metzlerbros.de>
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Tested-by: Richard Scobie <r.scobie@clear.net.nz>
Tested-by: Jasmin Jessich <jasmin@anw.at>
Tested-by: Dietmar Spingler <d_spingler@freenet.de>
Tested-by: Manfred Knick <Manfred.Knick@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Smatch and gcc complained:
drivers/media/pci/ddbridge/ddbridge-core.c:3491 bpsnr_show() warn: impossible condition '(snr[0] == 255) => ((-128)-127 == 255)'
drivers/media/pci/ddbridge/ddbridge-core.c: In function ‘bpsnr_show’:
drivers/media/pci/ddbridge/ddbridge-core.c:3491:13: warning: comparison is always false due to limited range of data type [-Wtype-limits]
Fix this by changing the type of snr to unsigned char.
Cc: Ralph Metzler <rjkm@metzlerbros.de>
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Tested-by: Richard Scobie <r.scobie@clear.net.nz>
Tested-by: Jasmin Jessich <jasmin@anw.at>
Tested-by: Dietmar Spingler <d_spingler@freenet.de>
Tested-by: Manfred Knick <Manfred.Knick@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
>From smatch:
drivers/media/pci/ddbridge/ddbridge-core.c:3490 snr_store() info: ignoring unreachable code.
In fact, the function immediately returns zero, so remove it and update
ddb_attrs_snr[] to not reference it anymore.
Cc: Ralph Metzler <rjkm@metzlerbros.de>
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Tested-by: Richard Scobie <r.scobie@clear.net.nz>
Tested-by: Jasmin Jessich <jasmin@anw.at>
Tested-by: Dietmar Spingler <d_spingler@freenet.de>
Tested-by: Manfred Knick <Manfred.Knick@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Smatch reported:
drivers/media/pci/ddbridge/ddbridge-core.c:1602 dvb_input_attach() error: we previously assumed 'dvb->fe' could be null (see line 1595)
dvb->fe2 will ever only be populated when dvb->fe is set. So only handle
registration of dvb->fe2 when dvb->fe got set beforehand by moving the
registration into the "if (dvb->fe)" conditional.
Cc: Ralph Metzler <rjkm@metzlerbros.de>
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Tested-by: Richard Scobie <r.scobie@clear.net.nz>
Tested-by: Jasmin Jessich <jasmin@anw.at>
Tested-by: Dietmar Spingler <d_spingler@freenet.de>
Tested-by: Manfred Knick <Manfred.Knick@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Fixes two warnings reported by smatch:
drivers/media/pci/ddbridge/ddbridge-core.c:240 ddb_redirect() warn: variable dereferenced before check 'idev' (see line 238)
drivers/media/pci/ddbridge/ddbridge-core.c:240 ddb_redirect() warn: variable dereferenced before check 'pdev' (see line 238)
Fixed by moving the existing checks up before accessing members.
Cc: Ralph Metzler <rjkm@metzlerbros.de>
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Tested-by: Richard Scobie <r.scobie@clear.net.nz>
Tested-by: Jasmin Jessich <jasmin@anw.at>
Tested-by: Dietmar Spingler <d_spingler@freenet.de>
Tested-by: Manfred Knick <Manfred.Knick@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Further cleanup of ddbridge-core and ddbridge-main, and moves all such
hw definitions into one single place, making things easier to maintain.
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Tested-by: Richard Scobie <r.scobie@clear.net.nz>
Tested-by: Jasmin Jessich <jasmin@anw.at>
Tested-by: Dietmar Spingler <d_spingler@freenet.de>
Tested-by: Manfred Knick <Manfred.Knick@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
While it seems valid that headers can carry simple oneline static inline
annotated functions, move them into their own header file to have the
overall code more readable. Also, keep them as header (and don't put in
a separate object) and static inline to help the compiler avoid
generating function calls.
(Thanks to Jasmin J. <jasmin@anw.at> for valuable input on this!)
Cc: Jasmin J. <jasmin@anw.at>
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Tested-by: Richard Scobie <r.scobie@clear.net.nz>
Tested-by: Jasmin Jessich <jasmin@anw.at>
Tested-by: Dietmar Spingler <d_spingler@freenet.de>
Tested-by: Manfred Knick <Manfred.Knick@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This huge patch bumps the ddbridge driver to version 0.9.29. Compared to
the vendor driver package, DD OctoNET including GTL link support, and all
DVB-C Modulator card support has been removed since this requires large
changes to the underlying DVB core API, which should eventually be done
separately, and, after that, the functionality/device support can be added
back rather easy.
While the diff is rather large, the bump is mostly a big refactor of all
data structures. Yet, the MSI support (message signaled interrupts) is
greatly improved, also all currently available CI single/duo bridge cards
are fully supported.
More changes compared to the upstream driver:
- the DDB_USE_WORKER flag/define was removed, kernel worker functionality
will be used.
- coding style is properly fixed (zero complaints from checkpatch)
- all (not much though) CamelCase has been fixed to kernel_case
- (private) IOCTLs temporarily removed (which are mainly used to provide
rarely-used FPGA update functionality)
Great care has been taken to keep all previous changes and fixes (e.g.
kernel logging via dev_*(), pointer annotations and such) intact.
Permission to reuse and mainline the driver code was formally granted by
Ralph Metzler <rjkm@metzlerbros.de>.
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Tested-by: Richard Scobie <r.scobie@clear.net.nz>
Tested-by: Jasmin Jessich <jasmin@anw.at>
Tested-by: Dietmar Spingler <d_spingler@freenet.de>
Tested-by: Manfred Knick <Manfred.Knick@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
As of 0.9.9b, the ddbridge code has been split from one single file
(ddbridge-core.c) into multiple files, with the purpose of taking care of
different topics, and to be able to reuse code in different kernel modules
(ddbridge.ko and octonet.ko). This applies the same code split, with a
notable difference:
In the vendor package, the split was done by moving all code parts into
separate files, and in the "main" code files (ddbridge.c and octonet.c),
a simple "#include ddbridge-core.c" was done.
In this patch, the same split (codewise) is done, but all resulting .c/.o
files will be handled by the makefile, with proper prototyping of all
shared functions done in ddbridge.h. To avoid conflicts wrt the global
space, the I2C functions and necessary prototypes for ddbridge-i2c.c are
moved into ddbridge-i2c.h, which is to be included wherever required.
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Tested-by: Richard Scobie <r.scobie@clear.net.nz>
Tested-by: Jasmin Jessich <jasmin@anw.at>
Tested-by: Dietmar Spingler <d_spingler@freenet.de>
Tested-by: Manfred Knick <Manfred.Knick@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The functions in ddbridge-core.c have been moved to different positions in
newer versions of the dddvb vendor driver package (most notably in version
0.9.9b). Perform the same code move to keep the diff of the upcoming
code bump simpler.
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Tested-by: Richard Scobie <r.scobie@clear.net.nz>
Tested-by: Jasmin Jessich <jasmin@anw.at>
Tested-by: Dietmar Spingler <d_spingler@freenet.de>
Tested-by: Manfred Knick <Manfred.Knick@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
24 GPIO pins from 32 available on solo6x10 chips are exported
to gpiolib. First 8 GPIOs are reserved for internal use on capture card
boards, GPIOs in range 8:15 are configured as outputs to control relays,
remaining 16:31 are configured as inputs to read sensor states.
Now with this patch userspace DVR software can switch relays and read
sensor states when GPIO extension cards are attached to Softlogic solo6x10
based video capture cards.
Signed-off-by: Anton Sviridenko <anton@corp.bluecherry.net>
Signed-off-by: Ismael Luceno <ismael@iodev.co.uk>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <media/drv-intf/saa7146.h>
and <linux/pci.h> work with const pci_device_id. So mark the non-const
structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <media/drv-intf/saa7146.h>
and <linux/pci.h> work with const pci_device_id. So mark the non-const
structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <media/drv-intf/saa7146.h>
and <linux/pci.h> work with const pci_device_id. So mark the non-const
structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <media/drv-intf/saa7146.h>
and <linux/pci.h> work with const pci_device_id. So mark the non-const
structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <media/drv-intf/saa7146.h>
and <linux/pci.h> work with const pci_device_id. So mark the non-const
structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <media/drv-intf/saa7146.h>
and <linux/pci.h> work with const pci_device_id. So mark the non-const
structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <media/drv-intf/saa7146.h>
and <linux/pci.h> work with const pci_device_id. So mark the non-const
structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <media/drv-intf/saa7146.h>
and <linux/pci.h> work with const pci_device_id. So mark the non-const
structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This is used just for printing a version number. As this is
never incremented, it makes no sense to keep it :-)
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
When a user starts and stops filtering at a demux device too quickly
in a very short interval, the user process hangs in uninterruptible sleep,
due to an inconsistency of kthread status in the driver.
The kthread can be stopped before it starts running its thread function,
but the invocation status was partly managed in the kthread function,
which resulted in a double kthread_stop() of one kthread.
Signed-off-by: Akihiro Tsukada <tskd08@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Check for i2c_algorithm structures that are only stored in
the algo field of an i2c_adapter structure. This field is
declared const, so i2c_algorithm structures that have this
property can be declared as const also.
This issue was identified using Coccinelle and the following
semantic patch:
@r disable optional_qualifier@
identifier i;
position p;
@@
static struct i2c_algorithm i@p = { ... };
@ok@
identifier r.i;
struct i2c_adapter e;
position p;
@@
e.algo = &i@p;
@bad@
position p != {r.p,ok.p};
identifier r.i;
@@
i@p
@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
struct i2c_algorithm i = { ... };
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Check for i2c_algorithm structures that are only stored in
the algo field of an i2c_adapter structure. This field is
declared const, so i2c_algorithm structures that have this
property can be declared as const also.
This issue was identified using Coccinelle and the following
semantic patch:
@r disable optional_qualifier@
identifier i;
position p;
@@
static struct i2c_algorithm i@p = { ... };
@ok@
identifier r.i;
struct i2c_adapter e;
position p;
@@
e.algo = &i@p;
@bad@
position p != {r.p,ok.p};
identifier r.i;
@@
i@p
@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
struct i2c_algorithm i = { ... };
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Check for i2c_algorithm structures that are only stored in
the algo field of an i2c_adapter structure. This field is
declared const, so i2c_algorithm structures that have this
property can be declared as const also.
This issue was identified using Coccinelle and the following
semantic patch:
@r disable optional_qualifier@
identifier i;
position p;
@@
static struct i2c_algorithm i@p = { ... };
@ok@
identifier r.i;
struct i2c_adapter e;
position p;
@@
e.algo = &i@p;
@bad@
position p != {r.p,ok.p};
identifier r.i;
@@
i@p
@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
struct i2c_algorithm i = { ... };
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Check for i2c_algorithm structures that are only stored in
the algo field of an i2c_adapter structure. This field is
declared const, so i2c_algorithm structures that have this
property can be declared as const also.
This issue was identified using Coccinelle and the following
semantic patch:
@r disable optional_qualifier@
identifier i;
position p;
@@
static struct i2c_algorithm i@p = { ... };
@ok@
identifier r.i;
struct i2c_adapter e;
position p;
@@
e.algo = &i@p;
@bad@
position p != {r.p,ok.p};
identifier r.i;
@@
i@p
@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
struct i2c_algorithm i = { ... };
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Adds a stv0910_single modparm which, when set, configures the stv0910 to
run in single demodulator mode, currently intended for high bit rate
testing.
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Tested-by: Richard Scobie <r.scobie@clear.net.nz>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Bhumika Goyal