The uninitialized field is not currently used, but might be in the future,
and static analyzers complain.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
drivers/gpu/drm/sti/sti_plane.c:76:33: error: ‘struct drm_framebuffer’
has no member named ‘pixel_format’; did you mean ‘format’?
I didn't look to hard at the casting to a char * and just did a
mechanical transformation of s/pixel_format/format->format/ as given in
commit 438b74a549 ("drm: Nuke fb->pixel_format").
Fixes: 438b74a549 ("drm: Nuke fb->pixel_format")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Acked-by: Vincent Abriou <vincent.abriou@st.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
- cleanups&fixes for dw-hdmi bride driver (Laurent)
- updates for adv bridge driver (John Stultz) for nexus
- drm_crtc_from_index helper rollout (Shawn Guo)
- removing drm_framebuffer_unregister_private from drivers&core
- target_vblank (Andrey Grodzovsky)
- misc tiny stuff
* tag 'drm-misc-next-2017-01-23' of git://anongit.freedesktop.org/git/drm-misc: (49 commits)
drm: qxl: Open code teardown function for qxl
drm: qxl: Open code probing sequence for qxl
drm/bridge: adv7511: Re-write the i2c address before EDID probing
drm/bridge: adv7511: Reuse __adv7511_power_on/off() when probing EDID
drm/bridge: adv7511: Rework adv7511_power_on/off() so they can be reused internally
drm/bridge: adv7511: Enable HPD interrupts to support hotplug and improve monitor detection
drm/bridge: adv7511: Switch to using drm_kms_helper_hotplug_event()
drm/bridge: adv7511: Use work_struct to defer hotplug handing to out of irq context
drm: vc4: use crtc helper drm_crtc_from_index()
drm: tegra: use crtc helper drm_crtc_from_index()
drm: nouveau: use crtc helper drm_crtc_from_index()
drm: mediatek: use crtc helper drm_crtc_from_index()
drm: kirin: use crtc helper drm_crtc_from_index()
drm: exynos: use crtc helper drm_crtc_from_index()
dt-bindings: display: dw-hdmi: Clean up DT bindings documentation
drm: bridge: dw-hdmi: Assert SVSRET before resetting the PHY
drm: bridge: dw-hdmi: Fix the name of the PHY reset macros
drm: bridge: dw-hdmi: Define and use macros for PHY register addresses
drm: bridge: dw-hdmi: Detect PHY type at runtime
drm: bridge: dw-hdmi: Handle overflow workaround based on device version
...
Final block of feature work for 4.11:
- gen8 pd cleanup from Matthew Auld
- more cleanups for view/vma (Chris)
- dmc support on glk (Anusha Srivatsa)
- use core crc api (Tomue)
- track wedged requests using fence.error (Chris)
- lots of psr fixes (Nagaraju, Vathsala)
- dp mst support, acked for merging through drm-intel by Takashi
(Libin)
- huc loading support, including uapi for libva to use it (Anusha
Srivatsa)
* tag 'drm-intel-next-2017-01-23' of git://anongit.freedesktop.org/git/drm-intel: (111 commits)
drm/i915: Update DRIVER_DATE to 20170123
drm/i915: reinstate call to trace_i915_vma_bind
drm/i915: Assert that created vma has a whole number of pages
drm/i915: Assert the drm_mm_node is allocated when on the VM lists
drm/i915: Treat an error from i915_vma_instance() as unlikely
drm/i915: Reject vma creation larger than address space
drm/i915: Use common LRU inactive vma bumping for unpin_from_display
drm/i915: Do an unlocked wait before set-cache-level ioctl
drm/i915/huc: Assert that HuC vma is placed in GuC accessible range
drm/i915/huc: Avoid attempting to authenticate non-existent fw
drm/i915: Set adjustment to zero on Up/Down interrupts if freq is already max/min
drm/i915: Remove the double handling of 'flags from intel_mode_from_pipe_config()
drm/i915: Remove crtc->config usage from intel_modeset_readout_hw_state()
drm/i915: Release temporary load-detect state upon switching
drm/i915: Remove i915_gem_object_to_ggtt()
drm/i915: Remove i915_vma_create from VMA API
drm/i915: Add a check that the VMA instance we lookup matches the request
drm/i915: Rename some warts in the VMA API
drm/i915: Track pinned vma in intel_plane_state
drm/i915/get_params: Add HuC status to getparams
...
This reverts commit 54a07c7bb0,
and reinstates the original.
[airlied: this might be a bad plan for git].
commit 3846fd9b86
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Wed Jan 11 10:01:17 2017 +0100
drm/probe-helpers: Drop locking from poll_enable
It was only needed to protect the connector_list walking, see
commit 8c4ccc4ab6
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Thu Jul 9 23:44:26 2015 +0200
drm/probe-helper: Grab mode_config.mutex in poll_init/enable
Unfortunately the commit message of that patch fails to mention that
the new locking check was for the connector_list.
But that requirement disappeared in
commit c36a3254f7
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Thu Dec 15 16:58:43 2016 +0100
drm: Convert all helpers to drm_connector_list_iter
and so we can drop this again.
This fixes a locking inversion on nouveau, where the rpm code needs to
re-enable. But in other places the rpm_get() calls are nested within
the big modeset locks.
While at it, also improve the kerneldoc for these two functions a
notch.
v2: Update the kerneldoc even more to explain that these functions
can't be called concurrently, or bad things happen (Chris).
Backmerge Linus master to get the connector locking revert.
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux: (645 commits)
sysctl: fix proc_doulongvec_ms_jiffies_minmax()
Revert "drm/probe-helpers: Drop locking from poll_enable"
MAINTAINERS: add Dan Streetman to zbud maintainers
MAINTAINERS: add Dan Streetman to zswap maintainers
mm: do not export ioremap_page_range symbol for external module
mn10300: fix build error of missing fpu_save()
romfs: use different way to generate fsid for BLOCK or MTD
frv: add missing atomic64 operations
mm, page_alloc: fix premature OOM when racing with cpuset mems update
mm, page_alloc: move cpuset seqcount checking to slowpath
mm, page_alloc: fix fast-path race with cpuset update or removal
mm, page_alloc: fix check for NULL preferred_zone
kernel/panic.c: add missing \n
fbdev: color map copying bounds checking
frv: add atomic64_add_unless()
mm/mempolicy.c: do not put mempolicy before using its nodemask
radix-tree: fix private list warnings
Documentation/filesystems/proc.txt: add VmPin
mm, memcg: do not retry precharge charges
proc: add a schedule point in proc_pid_readdir()
...
CEA-861-F tells us:
"When transmitting any RGB colorimetry, the Source should set the
YQ-field to match the RGB Quantization Range being transmitted
(e.g., when Limited Range RGB, set YQ=0 or when Full Range RGB,
set YQ=1) and the Sink shall ignore the YQ-field."
So let's go ahead and do that. Perhaps there are sinks that don't
ignore the YQ as they should for RGB?
I wasn't able to find similar text in CEA-861-E, so it would seem
to be a fairly "recent" addition.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170111125725.8086-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Eric Anholt <eric@anholt.net>
HDMI 2.0 recommends that we set the Q bits in the AVI infoframe
even when the sink does not support quantization range selection (QS=0).
According to CEA-861 we can do that as long as the Q we send matches
the default quantization range for the mode.
Previously I think I had misread the spec as saying that you can't
send a non-zero Q at all when QS=0. But that's not what the spec
actually says.
v2: Fix typo in commit message (Jani)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170111125725.8086-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Eric Anholt <eric@anholt.net>
Pull the logic to populate the quantization range information
in the AVI infoframe into a small helper. We'll be adding a bit
more logic to it, and having it in a central place seems like a
good idea since it's based on the CEA-861 spec.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170111125725.8086-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Eric Anholt <eric@anholt.net>
Make the code selecting the RGB quantization range a little less magicy
by wrapping it up in a small helper.
v2: s/adjusted_mode/mode in vc4 to make it actually compile
v3: Add a comment proposed by Eric
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170111141835.25369-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Eric Anholt <eric@anholt.net>
Since moving drm_crtc_get_hv_timings() into drm_modes.c, the compiler
has been able to get smarter and spots that drm_mode_copy() is trying to
preserve garbage from the stack.
Fixes: 196cd5d375 ("drm: s/drm_crtc_get_hv_timings/drm_mode_get_hv_timings/")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170126114409.9115-1-chris@chris-wilson.co.uk
Hardware has multiple (2 or 3, depending on model) stride
registers per layer; add a function that correctly takes that
into account. On hardware that only has 2 stride registers,
ensure that 3-plane (YUV) content has identical strides
for both chroma planes.
Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com>
[Removed smart layer stride setup, comment and commit message clarifications]
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Add the fb->offset[] value to the plane's physical start address
registe. Without that, packed formats are rendered incorrectly.
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
If the device-tree 'reg' node doesn't reserve enough
space for the DP, fail to bind.
Reviewed-by: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com>
[renamed added function to malidp_has_sufficient_address_space]
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Refuse to bind if the device-tree compatible string
lists a different hardware version.
Reviewed-by: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
We're going to use the same format list for output formats, so rename
everything related to input formats to avoid confusion.
Signed-off-by: Brian Starkey <brian.starkey@arm.com>
[touched commit title to clarify the final struct name]
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Since tweaking i915_vma_compare() we allowed constructors to skip
clearing the ggtt_view believing that we didn't access the unused
members. That, as it turns out, was not entirely true. In particular,
i915_gem_fault() uses
ret = remap_io_mapping(area,
area->vm_start + (vma->ggtt_view.partial.offset << PAGE_SHIFT),
(ggtt->mappable_base + vma->node.start) >> PAGE_SHIFT,
min_t(u64, vma->size, area->vm_end - area->vm_start),
&ggtt->mappable);
i.e. the ggtt_view.partial for both normal and partial views. If we
allowed garbage into the normal vma->ggtt_view and then try userspace
tried to mmap it, we could explode in an unobvious fashion.
Fixes: 7b92c047ba ("drm/i915: Eliminate superfluous i915_ggtt_view_rotated")
Fixes: 3bf4d57519 ("drm/i915: Stop clearing i915_ggtt_view")
Reported-by: Matthew Auld <matthew.william.auld@gmail.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170123145245.3972-1-chris@chris-wilson.co.uk
Tested-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
(cherry picked from commit 7c51846030)
With that the drm_pci_device_is_agp function becomes trivial, so
inline that too. And while at it, move the drm_pci_agp_destroy
declaration into drm-internal.h, since it's not used by drivers.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-11-daniel.vetter@ffwll.ch
Use the same trick we used for i915 when we still had ums support:
Just initialize the agp support unconditionally in the driver load
function.
Unfortunately that means we need to export drm_agp_init again, but I
think that's a lesser evil.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-9-daniel.vetter@ffwll.ch
This reverts commit 3846fd9b86.
There were some precursor commits missing for this around connector
locking, we should probably merge Lyude's nouveau avoid the problem patch.
After going through all the trouble of splitting out parts from
drm_crtc.[hc] and then properly documenting each I've entirely
forgotten to show the same TLC for CRTCs themselves!
Let's make amends asap.
v2: Review from Eric.
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
I just learned that &struct_name.member_name works and looks pretty
even. It doesn't (yet) link to the member directly though, which would
be really good for big structures or vfunc tables (where the
per-member kerneldoc tends to be long).
Also some minor drive-by polish where it makes sense, I read a lot
of docs ...
v2: Review from Eric.
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-4-daniel.vetter@ffwll.ch
I just learned that &struct_name.member_name works and looks pretty
even. It doesn't (yet) link to the member directly though, which would
be really good for big structures or vfunc tables (where the
per-member kerneldoc tends to be long).
Also some minor drive-by polish where it makes sense, I read a lot
of docs ...
v2: Review from Gustavo.
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-6-daniel.vetter@ffwll.ch
I just learned that &struct_name.member_name works and looks pretty
even. It doesn't (yet) link to the member directly though, which would
be really good for big structures or vfunc tables (where the
per-member kerneldoc tends to be long).
Also some minor drive-by polish where it makes sense, I read a lot
of docs ...
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-5-daniel.vetter@ffwll.ch
I just learned that &struct_name.member_name works and looks pretty
even. It doesn't (yet) link to the member directly though, which would
be really good for big structures or vfunc tables (where the
per-member kerneldoc tends to be long).
Also some minor drive-by polish where it makes sense, I read a lot
of docs ...
v2: Comments from Gustavo.
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Rewiewed-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-2-daniel.vetter@ffwll.ch
struct drm_dp_mst_topology_mgr currently stores a pointer to struct dev.
Changing this to instead hold a pointer to drm_device is more useful as it
gives access to DRM structures. This also makes it consistent with other
DRM structures like drm_crtc, drm_connector etc.
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1485301777-3465-2-git-send-email-dhinakaran.pandiyan@intel.com
The prototypes were moved to a new header, but the function definitions
were not updated to pull in the declarations.
drivers/gpu/drm/drm_cache.c:79:1: warning: no previous prototype for ‘drm_clflush_pages’ [-Wmissing-prototypes]
drivers/gpu/drm/drm_cache.c:120:1: warning: no previous prototype for ‘drm_clflush_sg’ [-Wmissing-prototypes]
drivers/gpu/drm/drm_cache.c:152:1: warning: no previous prototype for ‘drm_clflush_virt_range’ [-Wmissing-prototypes]
Fixes: f9a87bd7d5 ("drm: Move drm_clflush prototypes to drm_cache header file")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170121181944.24672-1-chris@chris-wilson.co.uk
The of_node member in struct drm_bridge is hidden when CONFIG_OF
is disabled, causing a build error:
drivers/gpu/drm/bridge/dw-hdmi.c: In function '__dw_hdmi_probe':
drivers/gpu/drm/bridge/dw-hdmi.c:2063:14: error: 'struct drm_bridge' has no member named 'of_node'
We could fix this either using a Kconfig dependency on CONFIG_OF
or making the one line conditional. The latter gives us better
compile test coverage, so this is what I'm doing here.
Fixes: 69497eb923 ("drm: bridge: dw-hdmi: Implement DRM bridge registration")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170123122312.3290934-1-arnd@arndb.de
When updating the rotation fields, one of the assignments zeroes out the
rest of the register fields, which include settings for chroma siting,
inverse gamma, AMBA AXI caching, and alpha blending.
Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
The horizontal and vertical flip flags were the wrong way around,
causing reflect-x to result in reflect-y being applied and vice-versa.
Fix them.
Fixes: ad49f8602f ("drm/arm: Add support for Mali Display Processors")
Signed-off-by: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
The destination rectangle provided by userspace in the CRTC_X/Y/W/H
properties is already expressed as the dimensions after rotation.
This means we shouldn't swap the width and height ourselves when a
90/270 degree rotation is requested, so remove the code doing the swap.
Fixes: ad49f8602f ("drm/arm: Add support for Mali Display Processors")
Signed-off-by: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Remove the check enforcing that src_w and src_h match crtc_w and crtc_h,
as this prevents rotation from working.
The check was intended to disallow scaling, but
drm_plane_helper_check_state() does that for us, while also taking
rotation into account, so the removed check was redundant in any case.
Signed-off-by: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Mali DP's plane ->atomic_check() only checks for the new state submitting
frame buffers with supported pixel formats and if there is enough
rotation memory for rotated planes. Add a call to
drm_plane_helper_check_state() to add additional checks for plane
state validity and clipping issues.
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
There is possible deference of NULL pointer on return of
malidp_duplicate_plane_state() if kmalloc fails. Check the
returned kmalloc pointer before continuing.
Signed-off-by: Shailendra Verma <Shailendra.v@samsung.com>
[cleaned up the code and re-formatted the commit message]
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
After warning that the connector list is not empty on device
unregistration (i.e. module unload) also print out which connectors are
still hanging around to aide finding the leak.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170119090513.4154-1-chris@chris-wilson.co.uk
PTR_ERR should access the value just tested by IS_ERR, otherwise
the wrong error code will be returned.
Fixes: d1667b8679 ("drm/hisilicon/hibmc: Add support for frame buffer")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170112151921.16538-1-weiyj.lk@gmail.com
Fixes the following sparse warning:
drivers/gpu/drm/drm_atomic_helper.c:1360:6: warning:
symbol 'release_crtc_commit' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170112142157.14684-1-weiyj.lk@gmail.com
- Added the new device ID
- Added new pll algorithm
Signed-off-by: Mathieu Larouche <mathieu.larouche@matrox.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
two amdkfd patches.
* tag 'drm-amdkfd-next-2017-01-16' of git://people.freedesktop.org/~gabbayo/linux:
drm/amdkfd: fix improper return value on error
amdkfd: fix spelling mistake in kfd_ioctl_dbg_unrgesiter
The main change here is the IRQ code cleanup, which gives us properly working
vblank counts and timestamps. We also get much less calls to runtime PM gets &
puts.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=8XSw
-----END PGP SIGNATURE-----
Merge tag 'omapdrm-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux into drm-next
omapdrm changes for 4.11
The main change here is the IRQ code cleanup, which gives us properly working
vblank counts and timestamps. We also get much less calls to runtime PM gets &
puts.
* tag 'omapdrm-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (26 commits)
drm/omap: panel-sony-acx565akm.c: Add MODULE_ALIAS
drm/omap: dsi: fix compile errors when enabling debug prints
drm: omapdrm: Perform initialization/cleanup at probe/remove time
drm: Move vblank cleanup from unregister to release
drm: omapdrm: Use sizeof(*var) instead of sizeof(type) for structures
drm: omapdrm: Remove global variables
drm: omapdrm: Simplify IRQ wait implementation
drm: omapdrm: Inline the pipe2vbl function
drm: omapdrm: Don't call DISPC power handling in IRQ wait functions
drm: omapdrm: Remove unused parameter from omap_drm_irq handler
drm: omapdrm: Don't expose the omap_irq_(un)register() functions
drm: omapdrm: Keep vblank interrupt enabled while CRTC is active
drm: omapdrm: Use a spinlock to protect the CRTC pending flag
drm: omapdrm: Prevent processing the same event multiple times
drm: omapdrm: Check the CRTC software state at enable/disable time
drm: omapdrm: Let the DRM core skip plane commit on inactive CRTCs
drm: omapdrm: Replace DSS manager state check with omapdrm CRTC state
drm: omapdrm: Handle OCP error IRQ directly
drm: omapdrm: Handle CRTC error IRQs directly
drm: omapdrm: Handle FIFO underflow IRQs internally
...
stih410 cleanup, create fbdev at binding, HQVDP fixes.
* tag 'sti-drm-next-2017-01-06' of https://github.com/vinceab/linux:
drm/sti: sti_vtg: Handle return NULL error from devm_ioremap_nocache
drm/sti: remove deprecated sti_vtac.c file
drm/sti: create fbdev at binding
drm/sti: update fps debugfs entries
drm/sti: do not post HQVDP command if no update
drm/sti: load XP70 firmware only once
drm/sti: allow audio playback on HDMI even if disabled.
a single fix for a FE hang after IOVA rollover on GC3000. This isn't
pretty, but is the minimal fix for the issue. A larger rework of the
code, that will also fix this issue properly, is currently in the works,
but that needs to wait for at least the next feature pull.
* 'drm-etnaviv-fixes' of https://git.pengutronix.de/git/lst/linux:
drm/etnaviv: trick drm_mm into giving out a low IOVA
Just regression fixups to resolve page fault issue of DECON device.
* 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
drm/exynos/decon5433: set STANDALONE_UPDATE_F on output enablement
drm/exynos/decon5433: fix CMU programming
drm/exynos/decon5433: do not disable video after reset
drm/exynos/decon5433: set STANDALONE_UPDATE_F also if planes are disabled
drm/exynos/decon5433: update shadow registers iff there are active windows
A little bigger than usual since it's two weeks worth. Highlights:
- Add support for new smc firmware on some new hainan variants
- add support for SI chips that require special mc firmware
- remove workarounds for issues fixed by new mc firmware
- fix a regression in cursor handling
- various VCE fixes
- fix for UVD clockgating
* 'drm-fixes-4.10' of git://people.freedesktop.org/~agd5f/linux:
drm/amdgpu: add support for new hainan variants
drm/radeon: add support for new hainan variants
drm/amdgpu: change clock gating mode for uvd_v4.
drm/amdgpu: fix program vce instance logic error.
drm/amdgpu: fix bug set incorrect value to vce register
Revert "drm/amdgpu: Only update the CUR_SIZE register when necessary"
drm/amd/powerplay: refine vce dpm update code on Cz.
drm/amdgpu: fix vm_fault_stop on gfx6
drm/amd/powerplay: fix vce cg logic error on CZ/St.
drm/radeon: drop the mclk quirk for hainan
drm/radeon: drop oland quirks
drm/amdgpu: drop the mclk quirk for hainan
drm/amdgpu: drop oland quirks
drm/amdgpu/si: load special ucode for certain MC configs
drm/radeon/si: load special ucode for certain MC configs
* 'msm-fixes-4.10-rc4' of git://people.freedesktop.org/~robclark/linux:
drm/msm: fix potential null ptr issue in non-iommu case
drm/msm/mdp5: rip out plane->pending tracking
A few more core fixes.
* tag 'drm-misc-fixes-2017-01-13' of git://anongit.freedesktop.org/git/drm-misc:
drm/probe-helpers: Drop locking from poll_enable
drm: Fix broken VT switch with video=1366x768 option
drm: Schedule the output_poll_work with 1s delay if we have delayed event
More GVT-g stuff than I'd like at this stage, but then again that's
pretty new and isolated so I'm not too worried.
* tag 'drm-intel-fixes-2017-01-19' of git://anongit.freedesktop.org/git/drm-intel: (26 commits)
drm/i915: Ignore bogus plane coordinates on SKL when the plane is not visible
drm/i915: Remove WaDisableLSQCROPERFforOCL KBL workaround.
drm/i915/gvt: rewrite gt reset handler using new function intel_gvt_reset_vgpu_locked
drm/i915/gvt: fix vGPU instance reuse issues by vGPU reset function
drm/i915/gvt: introduce intel_vgpu_reset_mmio() to reset mmio space
drm/i915/gvt: move mmio init/clean function to mmio.c
drm/i915/gvt: introduce intel_vgpu_reset_cfg_space to reset configuration space
drm/i915/gvt: move cfg space inititation function to cfg_space.c
drm/i915/gvt: introuduce intel_vgpu_reset_gtt() to reset gtt
drm/i915/gvt: introudce intel_vgpu_reset_resource() to reset vgpu resource state
drm/i915: Fix phys pwrite for struct_mutex-less operation
drm/i915: Clear ret before unbinding in i915_gem_evict_something()
drm/i915/gvt: cleanup GFP flags
drm/i915/gvt/kvmgt: return meaningful error for vgpu creating failure
drm/i915/gvt: cleanup opregion memory allocation code
drm/i915/gvt: destroy the allocated idr on vgpu creating failures
drm/i915/gvt: init/destroy vgpu_idr properly
drm/i915/gvt: dec vgpu->running_workload_num after the workload is really done
drm/i915/gvt: fix use after free for workload
drm/i915/gvt: remove duplicated definition
...
The call went away in:
commit 3b16525cc4
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Thu Aug 4 16:32:25 2016 +0100
drm/i915: Split insertion/binding of an object into the VM
It is useful to have this trace as it pairs nicely with the vma_unbind
one to track vma activity.
Added inside the i915_vma_bind function (was outside before) to keep a
similar placement as trace_i915_vma_unbind.
v2: print bind_flags instead of flags (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1484949083-11430-1-git-send-email-daniele.ceraolospurio@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
VMA (and their objects) are supposed to composed of whole pages. Add an
assert to catch any invalid construct when we create the VMA.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170119192659.31789-6-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Disallow creation of a vma that is larger than the available address
space, or triggers an overflow on fence expansion.
Testcase: igt/gem_exec_reloc/gtt-32
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170119192659.31789-3-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
HuC firmware is mapped at GuC accessible range. Let's add an assert to
verify that.
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170120192348.2049-2-michal.winiarski@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
HuC authentication is called even if HuC firmware is not present in the
system, leading to NULL ptr dereference on not allocated gem_object.
Let's avoid trying to authenticate HuC if its firmware is not loaded
successfully.
Fixes: dac84a3885 ("drm/i915/huc: Support HuC authentication")
v2: Check inside the auth function, split the assert (Michał)
v3: Oops, hit send before compiling, s/huc_fw/huc->fw
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170120192348.2049-1-michal.winiarski@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
When we reach the user's RPS limits, stop requesting an adjustment. Even
though we will clamp the requested frequency later, we rely on interrupt
masking to disable further adjustments in the same direction. Even
though it is unlikely (one scenario is a bug in the driver, another is
careful manipulation through the uAPI) if we keep exponentially
increasing the adjustment value, it will wrap and cause a negative
adjustment.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1484884104-28134-2-git-send-email-sagar.a.kamble@intel.com
DECON_TV requires STANDALONE_UPDATE after output enabling, otherwise it does
not start. This change is neutral for DECON.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
DECON_CMU register has reserved bits which should not be zeroed, otherwise
IP can behave strangely and cause IOMMU faults.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
decon_commit is called just after reset so video is disabled anyway.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This avoids using the deprecated drm_put_dev() and unload() hook
interfaces in the qxl driver.
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170119134806.8926-2-krisman@collabora.co.uk
This avoids using the deprecated drm_get_pci_dev() and load() hook
interfaces in the qxl driver.
The only tricky part is to ensure TTM debugfs initialization happens
after the debugfs root node is created, which is done by moving that
code into the debufs_init() hook.
Tested on qemu with igt and running a WM on top of X.
Changes since v1:
- Drop verification for primary minor in qxl_debugsfs_init.
Changes since V2:
- Put new header together with other debugfs headers.
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170119134806.8926-1-krisman@collabora.co.uk
crtc->config is on its way out. Let's reduce our dependence on it a
little bit by removing it from intel_modeset_readout_hw_state().
Also replace crtc->acttive checks with crtc_state->base.active checks.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Suggested-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161222140442.7204-1-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
After we call drm_atomic_commit() on the load-detect state, we can free
our local reference. Upon restore, we only apply and free the previous state.
Fixes: 0853695c3b ("drm: Add reference counting to drm_atomic_state")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.10-rc1+
Link: http://patchwork.freedesktop.org/patch/msgid/20170119113749.2517-1-chris@chris-wilson.co.uk
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
With the introduce of i915_vma_instance() for obtaining the VMA
singleton for a (obj, vm, view) tuple, we can remove the
i915_vma_create() in favour of a single entry point. We do incur a
lookup onto an empty tree, but the i915_vma_create() were being called
infrequently and during initialisation, so the small overhead is
negligible.
v2: Drop the i915_ prefix from the now static vma_create() function
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170116152131.18089-4-chris@chris-wilson.co.uk
Just as added paranoia against our future-selves add another check that
the lookup/created VMA instance matches the request.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170116152131.18089-3-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Whilst writing testcases to exercise the VMA API, some oddities came to
light, such as i915_gem_obj_lookup_or_create(). Joonas suggested
i915_vma_instance() as a neat replacement, so rename them, move them to
i915_vma.c and add some kerneldoc as a sugary bonus.
s/i915_gem_obj_to_vma/i915_vma_lookup/
s/i915_gem_obj_lookup_or_create_vma/i915_vma_instance/
Suggested-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170116152131.18089-2-chris@chris-wilson.co.uk
With atomic plane states we are able to track an allocation right from
preparation, during use and through to the final free after being
swapped out for a new plane. We can couple the VMA we pin for the
framebuffer (and its rotation) to this lifetime and avoid all the clumsy
lookups in between.
v2: Remove residual vma on plane cleanup (Chris)
v3: Add a description for the vma destruction in
intel_plane_destroy_state (Maarten)
References: https://bugs.freedesktop.org/show_bug.cgi?id=98829
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170116152131.18089-1-chris@chris-wilson.co.uk
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
This patch will allow for getparams to return the status of the HuC.
As the HuC has to be validated by the GuC this patch uses the validated
status to show when the HuC is loaded and ready for use. You cannot use
the loaded status as with the GuC as the HuC is verified after it is
loaded and is not usable until it is verified.
v2: removed the forewakes as the registers are already force-woken.
(T.Ursulin)
v3: rebased on top of drm-tip. Removed any reference to intel_huc.h
v4: rebased. Rename I915_PARAM_HAS_HUC to I915_PARAM_HUC_STATUS.
Remove intel_is_huc_valid() since it is used only in one place.
Put the case of I915_PARAM_HAS_HUC() in the right place.
v5: rebased. Add a comment to specify that I915_READ(reg)
does not read garbage value. The register HUC_STATUS2 is force
woken and no rpm is needed.
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Peter Antoine <peter.antoine@intel.com>
Reviewed-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1484755558-1234-6-git-send-email-anusha.srivatsa@intel.com
The HuC authentication is done by host2guc call. The HuC RSA keys
are sent to GuC for authentication.
v2: rebased on top of drm-tip. Changed name format and upped
version 1.7.
v3: changed wait_for_atomic to wait_for
v4: rebased. Rename intel_huc_auh() to intel_guc_auth_huc()
and place the prototype in intel_guc.h,correct the comments.
v5: rebased. Moved intel_guc_auth_huc from i915_guc_submission.c
to intel_uc.c.Update dev to dev_priv in intel_guc_auth_huc().
Renamed HOST2GUC_ACTION_AUTHENTICATE_HUC TO INTEL_GUC_ACTION_
AUTHENTICATE_HUC
v6: rebased. Add newline on DRM_ERRORs that already dont have one.
v7: rebased. Replace wait_for with intel_wait_for_register() since
the latter employs sleep optimisations for quick responses- as pointed
out by Chris Wilson.
v8: rebased. Cleanup the intel_guc_auth_huc() by removing checks
already performed in earlier functions. Make comments more descriptive.
v9: rebased. Changed the bias for pinning the HuC object. Move
intel_guc_auth_huc() to intel_huc.c. Change DRM_DEBUGs to DRM_ERRORs
in intel_guc_auth_huc(). Add return status to DRM_ERRORs.
v10: Remove message not required for the user..
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Tested-by: Xiang Haihao <haihao.xiang@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Alex Dai <yu.dai@intel.com>
Signed-off-by: Peter Antoine <peter.antoine@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1484755558-1234-5-git-send-email-anusha.srivatsa@intel.com
Add debugfs entry for HuC loading status check.
v2: rebased on top of drm-tip.
Cc: Michal wajdeczko <michal.wajdeczko@intel.com>
Tested-by: Xiang Haihao <haihao.xiang@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Alex Dai <yu.dai@intel.com>
Signed-off-by: Peter Antoine <peter.antoine@intel.com>
Reviewed-by: Jeff McGee <jeff.mcgee@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1484755558-1234-4-git-send-email-anusha.srivatsa@intel.com
This patch adds the support to load HuC on KBL
Version 2.0
v2: rebased on top of drm-tip. Rename KBL_FW_ to KBL_HUC_FW_
v3: rebased. Remove old checks.
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1484755558-1234-3-git-send-email-anusha.srivatsa@intel.com
This patch adds the HuC Loading for the BXT by using
the updated file construction.
Version 1.7 of the HuC firmware.
v2: rebased on to top drm-tip. Rename BXT_FW_MAJOR to BXT_HUC_FW_
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1484755558-1234-2-git-send-email-anusha.srivatsa@intel.com
The HuC loading process is similar to GuC. The intel_uc_fw_fetch()
is used for both cases.
HuC loading needs to be before GuC loading. The WOPCM setting must
be done early before loading any of them.
v2: rebased on-top of drm-intel-nightly.
removed if(HAS_GUC()) before the guc call. (D.Gordon)
update huc_version number of format.
v3: rebased to drm-intel-nightly, changed the file name format to
match the one in the huc package.
Changed dev->dev_private to to_i915()
v4: moved function back to where it was.
change wait_for_atomic to wait_for.
v5: rebased. Changed the year in the copyright message to reflect
the right year.Correct the comments,remove the unwanted WARN message,
replace drm_gem_object_unreference() with i915_gem_object_put().Make the
prototypes in intel_huc.h non-extern.
v6: rebased. Update the file construction done by HuC. It is similar to
GuC.Adopted the approach used in-
https://patchwork.freedesktop.org/patch/104355/ <Tvrtko Ursulin>
v7: Change dev to dev_priv in macro definition.
Corrected comments.
v8: rebased on top of drm-tip. Updated functions intel_huc_load(),
intel_huc_init() and intel_uc_fw_fetch() to accept dev_priv instead of
dev. Moved contents of intel_huc.h to intel_uc.h.
v9: change SKL_FW_ to SKL_HUC_FW_. Add intel_ prefix to guc_wopcm_size().
Remove unwanted checks in intel_uc.h. Rename huc_fw in struct intel_huc to
simply fw to avoid redundency.
v10: rebased. Correct comments. Make intel_huc_fini() accept dev_priv
instead of dev like intel_huc_init() and intel_huc_load().Move definition
to i915_guc_reg.h from intel_uc.h. Clean DMA_CTRL bits after HuC DMA
transfer in huc_ucode_xfer() instead of guc_ucode_xfer(). Add suitable
WARNs to give extra info.
v11: rebased. Add proper bias for HuC and make sure there are
asserts on failure by using guc_ggtt_offset_vma(). Introduce
intel_huc.c and remove intel_huc_loader.c since it has functions that
do more than just loading.Correct year in copyright.
v12: remove invalidates that are not required anymore.
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Tested-by: Xiang Haihao <haihao.xiang@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Alex Dai <yu.dai@intel.com>
Signed-off-by: Peter Antoine <peter.antoine@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1484755558-1234-1-git-send-email-anusha.srivatsa@intel.com
The .disable_display parameter was causing a fatal crash when fbdev
was dereferenced during driver init.
V1: protection in i915_drv.c
V2: Moved protection to intel_fbdev.c
Fixes: 43cee31434 ("drm/i915/fbdev: Limit the global async-domain synchronization")
Testcase: igt/drv_module_reload/basic-no-display
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1484775523-29428-1-git-send-email-clinton.a.taylor@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.8+
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
I've found that by just turning the chip on and off via the
POWER_DOWN register, I end up getting i2c_transfer errors on
HiKey.
Investigating further, it turns out that some of the register
state in hardware is getting lost, as the device registers are
reset when the chip is powered down.
Thus this patch simply re-writes the i2c address to the
ADV7511_REG_EDID_I2C_ADDR register to ensure its properly set
before we try to read the EDID data.
Cc: David Airlie <airlied@linux.ie>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1484614372-15342-7-git-send-email-john.stultz@linaro.org
Thus this patch changes the EDID probing logic so that we
re-use the __adv7511_power_on/off() calls instead of duplciating
logic.
This does change behavior slightly as it adds the HPD signal
pulse to the EDID probe path, but Archit has had a patch to
add HPD signal pulse to the EDID probe path before, so this
should address the cases where that helped. Another difference
is that regcache_mark_dirty() is also called in the power off
path once EDID is probed.
Cc: David Airlie <airlied@linux.ie>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1484614372-15342-6-git-send-email-john.stultz@linaro.org
In chasing down issues with EDID probing, I found some
duplicated but incomplete logic used to power the chip on and
off.
This patch refactors the adv7511_power_on/off functions, so
they can be used for internal needs.
Cc: David Airlie <airlied@linux.ie>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1484614372-15342-5-git-send-email-john.stultz@linaro.org
On some adv7511 implementations, we can get some spurious
disconnect signals which can cause monitor probing to fail.
This patch enables HPD (hot plug detect) interrupt support
which allows the monitor to be properly re-initialized when
the spurious disconnect signal goes away.
This also enables proper hotplug support.
Cc: David Airlie <airlied@linux.ie>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: dri-devel@lists.freedesktop.org
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Originally-by: Archit Taneja <architt@codeaurora.org>
[jstultz: Added proper commit message]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1484614372-15342-4-git-send-email-john.stultz@linaro.org
In chasing down a previous issue with EDID probing from calling
drm_helper_hpd_irq_event() from irq context, Laurent noticed
that the DRM documentation suggests that
drm_kms_helper_hotplug_event() should be used instead.
Thus this patch replaces drm_helper_hpd_irq_event() with
drm_kms_helper_hotplug_event(), which requires we update the
connector.status entry and only call _hotplug_event() when the
status changes.
Cc: David Airlie <airlied@linux.ie>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1484614372-15342-3-git-send-email-john.stultz@linaro.org
I was recently seeing issues with EDID probing, where
the logic to wait for the EDID read bit to be set by the
IRQ wasn't happening and the code would time out and fail.
Digging deeper, I found this was due to the fact that
IRQs were disabled as we were running in IRQ context from
the HPD signal.
Thus this patch changes the logic to handle the HPD signal
via a work_struct so we can be out of irq context.
With this patch, the EDID probing on hotplug does not time
out.
Cc: David Airlie <airlied@linux.ie>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1484614372-15342-2-git-send-email-john.stultz@linaro.org
When the plane is invisible we may have all sorts of bogus stuff
in the coordinates, which we must ignore or else we might fail the
plane update. This started to happen on SKL when I moved the plane
offset computation to happen in the check phase. Previously we
happily ignored it all since we never called the update_plane hook
with an invisible plane.
Cc: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Cc: drm-intel-fixes@lists.freedesktop.org
Fixes: b63a16f6cd ("drm/i915: Compute display surface offset in the plane check hook for SKL+")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98258
Testcase: igt/pm_rpm/legacy-planes
Testcase: igt/pm_rpm/universal-planes
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478550057-24864-3-git-send-email-ville.syrjala@linux.intel.com
(cherry picked from commit a5e4c7d0aa)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The WaDisableLSQCROPERFforOCL workaround has the side effect of
disabling an L3SQ optimization that has huge performance implications
and is unlikely to be necessary for the correct functioning of usual
graphic workloads. Userspace is free to re-enable the workaround on
demand, and is generally in a better position to determine whether the
workaround is necessary than the DRM is (e.g. only during the
execution of compute kernels that rely on both L3 fences and HDC R/W
requests).
The same workaround seems to apply to BDW (at least to production
stepping G1) and SKL as well (the internal workaround database claims
that it does for all steppings, while the BSpec workaround table only
mentions pre-production steppings), but the DRM doesn't do anything
beyond whitelisting the L3SQCREG4 register so userspace can enable it
when it sees fit. Do the same on KBL platforms.
Improves performance of the GFXBench4 gl_manhattan31 benchmark by 60%,
and gl_4 (AKA car chase) by 14% on a KBL GT2 running Mesa master --
This is followed by a regression of 35% and 10% respectively for the
same benchmarks and platform caused by my recent patch series
switching userspace to use the dataport constant cache instead of the
sampler to implement uniform pull constant loads, which caused us to
hit more heavily the L3 cache (and on platforms other than KBL had the
opposite effect of improving performance of the same two benchmarks).
The overall effect on KBL of this change combined with the recent
userspace change is respectively 4.6% and 2.6%. SynMark2 OglShMapPcf
was affected by the constant cache changes (though it improved as it
did on other platforms rather than regressing), but is not
significantly affected by this patch (with statistical significance of
5% and sample size 20).
v2: Drop some more code to avoid unused variable warning.
Fixes: 738fa1b312 ("drm/i915/kbl: Add WaDisableLSQCROPERFforOCL")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99256
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: Eero Tamminen <eero.t.tamminen@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: beignet@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v4.7+
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
[Removed double Fixes tag]
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1484217894-20505-1-git-send-email-mika.kuoppala@intel.com
(cherry picked from commit 8726f2faa3)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Function tegra_crtc_from_pipe() does the exactly same thing as what
crtc helper drm_crtc_from_index() provides. Use the helper to save
some code.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1483961145-18453-6-git-send-email-shawnguo@kernel.org
Use drm_crtc_from_index() to find drm_crtc for given index, so that we
do not need to maintain a pointer array in struct kirin_drm_private.
Reviewed-by: Xinliang Liu<z.liuxinliang@hisilicon.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1483961145-18453-3-git-send-email-shawnguo@kernel.org
The error paths in hsw_trans_edp_pipe_A_crc_wa() and
intel_prepare_reset() would potentially call drm_atomic_state_put with a
NULL state, which would lead to a NULL pointer dereference.
Found by coverity.
v2: Improve the error paths. (Chris)
Fixes: 0853695c3b ("drm: Add reference counting to drm_atomic_state")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.10-rc1+
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1484742868-9551-1-git-send-email-ander.conselvan.de.oliveira@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
intel_display_resume() may be called without an atomic state to restore,
i.e. dev_priv->modeset_reset_restore state is NULL. One such case is
following a lid open/close event and the forced modeset in
intel_lid_notify().
Reported-by: Stefan Seyfried <stefan.seyfried@googlemail.com>
Tested-by: Stefan Seyfried <stefan.seyfried@googlemail.com>
Fixes: 0853695c3b ("drm: Add reference counting to drm_atomic_state")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.10-rc1+
Link: http://patchwork.freedesktop.org/patch/msgid/20170115125825.18597-1-chris@chris-wilson.co.uk
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Explain in a comment how and why we treat hung context like we do.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1484668747-9120-7-git-send-email-mika.kuoppala@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
If we can't recover the GPU after the reset, mark it as wedged to cancel
the outstanding tasks and to prevent new users from trying to use the
broken GPU.
v2: Check the same ring is hung again before declaring the reset broken.
v3: use engine_stalled (Mika)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1484668747-9120-6-git-send-email-mika.kuoppala@intel.com
Split engine reset for engine and request specific parts.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1484668747-9120-5-git-send-email-mika.kuoppala@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Move the engine stalled/pardoned check into a helper function.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1484668747-9120-4-git-send-email-mika.kuoppala@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Since we now only skip banned contexts, preventing the skip of default
contexts is no longer sensible. For a similar argument as before
'commit 7ec73b7e36 ("drm/i915: Only skip requests once a context is banned")'
we end up with an inconsistent API if we only mark future execbufs from
the default ctx as banned but fail to mark those currently executing
as failed.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1484668747-9120-3-git-send-email-mika.kuoppala@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Add a new function for skipping all pending requests
for a context in order to make engine reset flow more
readable.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1484668747-9120-2-git-send-email-mika.kuoppala@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Now that we have prepare/finish routines for the GEM reset, move the
disabling of the engine->irq_tasklet into them to reduce repetition. The
device irq enable/disable is split out to ensure it is run first and
last always (even if the GPU reset fails).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1484668747-9120-1-git-send-email-mika.kuoppala@intel.com
Appease both the poor reader and the compiler by rewriting the string
lookup for EDP_PSR2_STATUS_CTL:
drivers/gpu/drm/i915/i915_debugfs.c:2662 i915_edp_psr_status() warn: if statement not indented
Fixes: 6ba1f9e177 ("drm/i915/psr: report live PSR2 State")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jim Bride <jim.bride@linux.intel.com>
Cc: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Cc: Patil Deepti <deepti.patil@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170116130622.20369-1-chris@chris-wilson.co.uk
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
HuC firmware css header has almost exactly same definition as GuC
firmware except for the sw_version. Also, add a new member fw_type
into intel_uc_fw to indicate what kind of fw it is. So, the loader
will pull right sw_version from header.
v2: rebased on-top of drm-intel-nightly
v3: rebased. Rename device_id to guc_branch_client_version,
make guc_sw_version a union. <Jeff Mcgee>. Put UC_FW_TYPE_GUC
and UC_FW_TYPE_HUC into an enum.
v4: rebased on top of drm-tip.Update dev to dev_priv in
intel_uc_fw_fetch.
v5: rebased. Add INTEL_ prefix to an enum. Add fw_type declaration
from patch 1.Combine two different unions for huc and guc version,
reserved etc into one union with two structs.
v6: rebased. Change fw_type to enum.
v7: rebased. Rename the enum fw_type to intel_uc_fw_type.
Cc: Michal Wajdeczko <michal.wajdeczko.@intel.com>
Tested-by: Xiang Haihao <haihao.xiang@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Alex Dai <yu.dai@intel.com>
Signed-off-by: Peter Antoine <peter.antoine@intel.com>
Reviewed-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1484356631-16139-3-git-send-email-anusha.srivatsa@intel.com
Rename some of the GuC fw loading code to make them more general. We
will utilise them for HuC loading as well.
s/intel_guc_fw/intel_uc_fw/g
s/GUC_FIRMWARE/INTEL_UC_FIRMWARE/g
Struct intel_guc_fw is renamed to intel_uc_fw. Prefix of tts members,
such as 'guc' or 'guc_fw' either is renamed to 'uc' or removed for
same purpose.
v2: rebased on top of nightly.
reapplied the search/replace as upstream code as changed.
v3: removed G from messages in shared fw fetch function.
v4: rebased.Updated dev to dev_priv in intel_guc_setup(), guc_fw_getch()
and intel_guc_init().
v5: rebased. Remove uint32_t fw_type to patch 2. Add INTEL_ prefix for
fields in enum intel_uc_fw_status. Remove uc_dev field since its never
used.Rename uc_fw to just fw and guc_fw to fw to avoid redundency.
v6: rebased. Remove sections of code that were commented and no longer
required.
v7: rebased. Remove uc_fw_ prefix from path and obj fields
in intel_uc_fw struct as suggested by Michal.
v8: rebased. Add declaration of intel_guc_wopcm_size() in
this patch instead of patch 3.
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Alex Dai <yu.dai@intel.com>
Signed-off-by: Peter Antoine <peter.antoine@intel.com>
Reviewed-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1484356631-16139-2-git-send-email-anusha.srivatsa@intel.com
Functions supporting GuC logging capabilities were spread across
many files, with unnecessary exposures and mixed with unrelated
code. Dedicate file will make maintenance of all GuC functions
easier as more functions are coming to support GuC submissions.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170113174157.104492-1-michal.wajdeczko@intel.com
According to the PHY IP core vendor, the SVSRET signal must be asserted
before resetting the PHY. Tests on RK3288 and R-Car Gen3 showed no
regression, the change should thus be safe.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170117082910.27023-20-laurent.pinchart+renesas@ideasonboard.com
The PHY reset signal is controlled by bit PHYRSTZ in the MC_PHYRSTZ
register. The signal is active low on Gen1 PHYs and active high on Gen2
PHYs. The driver toggles the signal high then low, which is correct for
all currently supported platforms, but the register values macros are
incorrectly named. Replace them with a single macro named after the bit,
and add a comment to the source code to explain the behaviour.
The driver's behaviour isn't changed by this rename, the code will still
need to be fixed to support Gen1 PHYs.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170117082910.27023-19-laurent.pinchart+renesas@ideasonboard.com
Replace the hardcoded register address numerical values with macros to
clarify the code.
This change has been tested by comparing the assembly code before and
after the change.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170117082910.27023-18-laurent.pinchart+renesas@ideasonboard.com
Use the device version queried at runtime instead of the device type
provided through platform data to handle the overflow workaround. This
will make support of other SoCs integrating the same HDMI TX controller
version easier.
Among the supported platforms only i.MX6DL and i.MX6Q have been
identified as needing the workaround. Disabling it on Rockchip RK3288
(which integrates a v2.00a controller) didn't produce any error or
artifact.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170117082910.27023-16-laurent.pinchart+renesas@ideasonboard.com
Bit 0 in CONFIG1_ID tells whether the IP core uses an AHB slave
interface for control. The correct way to identify AHB audio DMA support
is through bit 1 in CONFIG3_ID.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170117082910.27023-15-laurent.pinchart+renesas@ideasonboard.com
The DWC HDMI TX can be recognized by the two product identification
registers. If the registers don't read as expect the IP will be very
different than what the driver has been designed for, or will be
misconfigured in a way that makes it non-operational (invalid memory
address, incorrect clocks, ...). We should reject this situation with an
error.
While this isn't critical for proper operation with supported IPs at the
moment, the driver will soon gain automatic device-specific handling
based on runtime device identification. This change makes it easier to
implement that without having to default to a random guess in case the
device can't be identified.
While at it print a readable version number in the device identification
message instead of raw register values.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170117082910.27023-14-laurent.pinchart+renesas@ideasonboard.com
The bit is documented in a Rockchip BSP as
#define m_SVSRET_SIG (1 << 5) /* depend on PHY_MHL_COMB0=1 */
This is confirmed by a Renesas platform, which uses a 2.0 DWC HDMI TX as
the RK3288. Rename the bit accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170117082910.27023-13-laurent.pinchart+renesas@ideasonboard.com
The current code hard codes the call of hdmi_phy_configure() to be 8bpp
and provides extraneous error checking to verify that this hardcoded
value is correct. Simplify the implementation by removing the argument.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170117082910.27023-12-laurent.pinchart+renesas@ideasonboard.com
As an option for drivers not based on the component framework, register
the bridge with the DRM core with the DRM bridge API. Existing drivers
based on dw_hdmi_bind() and dw_hdmi_unbind() are not affected as those
functions are preserved with their current behaviour.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170117082910.27023-11-laurent.pinchart+renesas@ideasonboard.com
The DRM device is not guaranteed by the bridge API to be available
before the attach callback. The driver performs properly at the moment
as it doesn't use the drm_bridge_add() registration method. As this will
be changed later, move connector creation to attach time to ensure
compatibility with the API.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170117082910.27023-10-laurent.pinchart+renesas@ideasonboard.com
The next commit will reference structures and functions in a way that
currently requires forward declarations. Reorder the functions to avoid
that. No functional change to the code is performed.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170117082910.27023-9-laurent.pinchart+renesas@ideasonboard.com
There's no need to duplicate identical code in multiple drivers (two at
the moment, one more to come soon). Move it to the dw-hdmi core where it
can be shared. If resource allocation ever becomes device-specific later
we'll always have the option of splitting it out again.
While it at pass the platform device to the bind function to avoid
having to cast struct device to struct platform_device.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170117082910.27023-8-laurent.pinchart+renesas@ideasonboard.com
Hotplug events should only be forwarded to the DRM core by the interrupt
handler when the bridge has been attached, otherwise the DRM device
pointer will be NULL, resulting in a crash.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170117082910.27023-7-laurent.pinchart+renesas@ideasonboard.com
The 'prep' parameter passed to hdmi_phy_configure() is useless. It is
hardcoded as 0, and if set, simply prevents the configure function from
executing.
Remove it.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170117082910.27023-4-laurent.pinchart+renesas@ideasonboard.com
The master argument isn't used. The data argument, a void pointer, is
used by the bind function only where it's cast to a drm_device pointer,
which can easily be obtained from the encoder argument instead. Remove
them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170117082910.27023-3-laurent.pinchart+renesas@ideasonboard.com
The latter is just an int wrapper around the former void function that
unconditionally returns 0. As the return value is never checked, merge
the two functions into one.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170117082910.27023-2-laurent.pinchart+renesas@ideasonboard.com
When the plane is invisible we may have all sorts of bogus stuff
in the coordinates, which we must ignore or else we might fail the
plane update. This started to happen on SKL when I moved the plane
offset computation to happen in the check phase. Previously we
happily ignored it all since we never called the update_plane hook
with an invisible plane.
Cc: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Cc: drm-intel-fixes@lists.freedesktop.org
Fixes: b63a16f6cd ("drm/i915: Compute display surface offset in the plane check hook for SKL+")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98258
Testcase: igt/pm_rpm/legacy-planes
Testcase: igt/pm_rpm/universal-planes
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478550057-24864-3-git-send-email-ville.syrjala@linux.intel.com
need to clear bit31-29 in GRBM_GFX_INDEX,
then the program can be valid.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set the proper bits for clockgating setup.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Commit 625d988acc ("drm/i915: Extract reserving space in the GTT to a
helper") introduces this typo which can cause a driver loading failure
in Linux GVT-g guest.
Fixes: 625d988acc ("drm/i915: Extract reserving space in the GTT to a helper")
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Zhiyuan Lv <zhiyuan.lv@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1484661972-9366-1-git-send-email-zhi.a.wang@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Registering the connector explicitly right after creation is not
necessary for modesetting drivers, because drm_dev_register already takes
care of this on the core side, by calling drm_modeset_register_all.
In addition, performing the initialization too early will get in the way
of the load() hook removal, because the connector interface cannot be
published prior to registering the minors.
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
CC: Dave Airlie <airlied@redhat.com>
CC: Daniel Vetter <daniel.vetter@ffwll.ch>
CC: dri-devel@lists.freedesktop.org
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170112161610.19924-1-krisman@collabora.co.uk
Maintain a table of regulator names expected by ADV7511 and ADV7533.
Use regulator_bulk_* api to configure these.
Initialize and enable the regulators during probe itself. Controlling
these dynamically is left for later.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1484117547-26417-3-git-send-email-architt@codeaurora.org
In function kfd_wait_on_events(), when the call to copy_from_user()
fails, the value of return variable ret is 0. 0 indicates success, which
is inconsistent with the execution status. This patch fixes the bug by
assigning "-EFAULT" to ret when copy_from_user() returns an unexpected
value.
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Some engines are never user or already sitting idle in the kernel
context and for those we can skip flushing the current context for
i915_gem_switch_to_kernel_context(). We used to perform this
optimisation but that was removed for convenience of converting over to
multiple timelines and handling the pending request queues.
From the perspective of writing selftests, reducing the number of
background operations on the engines makes defining assertions easier.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170114162334.10271-2-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
As we now have the ability to directly reset the GPU from the waiter
(and so do not need to drop the lock in order to let the reset proceed)
and also do not lose requests over a reset, we can now simply queue the
request to occur after the reset rather than roundtripping to userspace
(or worse failing with EIO).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170114162334.10271-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The aliasing_gtt is just that, an alias of the global GTT. We do not
populate it directly, instead we always use the global GTT. Catch any
attempt to incorrectly allocate ranges from the aliasing_gtt.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170115134746.29325-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
drivers/gpu/drm/i915/i915_gpu_error.c: In function ‘i915_error_vprintf’:
drivers/gpu/drm/i915/i915_gpu_error.c:137:3: warning:
function might be possible candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format]
len = vsnprintf(NULL, 0, f, tmp);
^~~
drivers/gpu/drm/i915/i915_gpu_error.c:144:2: warning:
function might be possible candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format]
len = vsnprintf(e->buf + e->bytes, e->size - e->bytes, f, args);
^~~
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170114105113.1231-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
It is only being used to clear a struct and set the type, after which it
is overwritten. Since we no longer check the unset bits of the union,
skipping the clear is permissible.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170114002827.31315-6-chris@chris-wilson.co.uk
Reading the ggtt_views is much more pleasant without the extra
characters from specifying the union (i.e. ggtt_view.partial rather than
ggtt_view.params.partial). To make this work inside i915_vma_compare()
with only a single memcmp requires us to ensure that there are no
uninitialised bytes within each branch of the union (we make sure the
structs are packed) and we need to store the size of each branch.
v4: Rewrite changelog and add comments explaining the assert.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170114002827.31315-5-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
In preparation for the next patch to convert to using an anonymous union
and leaving the excess bytes in the union uninitialised, we first need
to make sure we do not compare using those uninitialised bytes. We also
want to preserve the compactness of the code, avoiding a second call to
memcmp or introducing a switch, so we take advantage of using the type
as an encoded size (as well as a unique identifier for each type of view).
v2: Add the rationale for why we encode size into ggtt_view.type as a
comment before the memcmp()
v3: Use a switch to also assert that no two i915_ggtt_view_type have the same
value.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170114002827.31315-3-chris@chris-wilson.co.uk
In the next few patches, we will depend upon there being no
uninitialised bits inside the ggtt_view. To ensure this we add the
__packed attribute and double check with a build bug that gcc hasn't
expanded the struct to include some padding bytes.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170114002827.31315-2-chris@chris-wilson.co.uk
Reports live state of PSR2 form PSR2_STATUS register.
bit field 31:28 gives the live state of PSR2.
It can be used to check if system is in deep sleep,
selective update or selective update standby.
During video play back, we can use this to check
if system is entering SU mode or not.
when system is in idle state, DEEP_SLEEP(8) must be entered.
When video playback is happening, system must be in
SLEEP(3 / selective update) or SU_STANDBY( 6 / selective update standby)
v2: (Rodrigo)
- Remove EDP_PSR2_STATUS_TG_ON=a ,instead use ARRAY_SIZE
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jim Bride <jim.bride@linux.intel.com>
Signed-off-by: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Signed-off-by: Patil Deepti <deepti.patil@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1483720352-24761-1-git-send-email-vathsala.nagaraju@intel.com
Psr2 is enabled only for y cordinate panels.Once GTC (global time code)
is implemented,this restriction is removed so that psr2
can work on panels without y cordinate support.
v2: (Rodrigo)
- Move the check to intel_psr_match_conditions
v3: (Rodrigo)
- add return false
v4: rebase
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jim Bride <jim.bride@linux.intel.com>
Signed-off-by: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Signed-off-by: Patil Deepti <deepti.patil@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1484173710-3138-1-git-send-email-vathsala.nagaraju@intel.com
Program EDP_PSR_DEBUG_CTL (PSR_MASK) to enable system
to go to deep sleep while in psr2.PSR2_STATUS bit 31:28
should report value 8 , if system enters deep sleep state.
Also, EDP_FRAMES_BEFORE_SU_ENTRY is set 1 , if not set,
flickering is observed on psr2 panel.
v2: (Ilia Mirkin)
- Remove duplicate bit definition 25:27
v3: rebase
v4: rebase
v5: rebase
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jim Bride <jim.bride@linux.intel.com>
Signed-off-by: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Signed-off-by: Patil Deepti <deepti.patil@intel.com>
Reviewed-by: Jim Bride <jim.bride@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1484267484-21843-1-git-send-email-vathsala.nagaraju@intel.com
As per bpsec, CHICKEN_TRANS_EDP bit 12 ,15 must be programmed in
psr2 enable sequence.
bit 12 : Program Transcoder EDP VSC DIP header with a valid setting for
PSR2 and Set CHICKEN_TRANS_EDP(0x420cc) bit 12 for programmable
header packet.
bit 15 : Set CHICKEN_TRANS_EDP(0x420cc) bit 15 if Y coordinate is supported
v2: (Rodrigo)
- move CHICKEN_TRANS_EDP bit set logic right after setup_vsc
v3:(Rodrigo)
- initialize chicken_trans to CHICKEN_TRANS_BIT12 instead of 0
v4:(chris wilson)
- use BIT(12), remove CHICKEN_TRANS_BIT12
- remove unnecessary comments
- update commit message
v5:
- rename bit 12 PSR2_VSC_ENABLE_PROG_HEADER
- rename bit 15 PSR2_ADD_VERTICAL_LINE_COUNT
v6:(Rodrigo)
- remove TRANS_EDP=3, use cpu_transcoder
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jim Bride <jim.bride@linux.intel.com>
Signed-off-by: vathsala nagaraju <vathsala.nagaraju@intel.com>
Signed-off-by: Patil Deepti <deepti.patil@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1484247691-20930-1-git-send-email-vathsala.nagaraju@intel.com
This reverts commits 7c83d7abc9 and
a1f49cc179.
They caused the HW cursor to disappear under various circumstances in
the wild. I wasn't able to reproduce any of them, and I'm not sure
what's going on. But those changes aren't a big deal anyway, so let's
just revert for now.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=191291
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99143
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We currently check after the slow path that the vma is bound correctly,
but we don't currently check after the fast path. This is important in
case we accidentally take the fast path and leave the vma misplaced.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170111210937.29252-27-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Fixes: 9cb07b099fb ("drm/msm: support multiple address spaces")
Reported-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
It would race between userspace thread and commit worker. Ie. vblank
irq would trigger event and userspace could begin the next atomic
update, before the commit worker had a chance to clear the pending
flag.
If we do end up needing something to prevent userspace from trying
another pageflip before getting vblank event, it should probably be
implemented as a pending_planes bitmask, similar to pending_crtcs. See
start_atomic() and end_atomic().
Signed-off-by: Rob Clark <robdclark@gmail.com>
STANDALONE_UPDATE_F should be set if something changed in plane configurations,
including plane disable.
The patch fixes page-faults bugs, caused by decon still using framebuffers
of disabled planes.
v2: fixed clear-bit code (Thx Marek)
v3: use test_and_clear_bit (Thx Joonyoung)
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Tested-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Improper usage of DECON_UPDATE register leads to subtle errors.
If it set in decon_commit when there are no active windows it results
in slow registry updates - all subsequent shadow registry updates takes more
than full vblank. On the other side if it is not set when there are
active windows it results in garbage on the screen after suspend/resume of
FB console.
The patch hopefully fixes it.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
GT reset and FLR share some operations and they are both implemented in
our new function intel_gvt_reset_vgpu_locked(). This patch rewrite the
gt reset handler using this new function.
Besides, this new implementation fixed the old issue in GT reset. The
old implementation reset GGTT entries which is illegal. We only clear
GGTT entries at PCI level reset.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Our function tests found several issues related to reusing vGPU
instance. They are qemu reboot failure, guest tdr after reboot, host
hang when reboot guest. All these issues are caused by dirty status
inherited from last VM.
This patch fix all these issues by resetting a virtual GPU before VM
use it. The reset logical is put into a low level function
_intel_gvt_reset_vgpu(), which supports Device Model Level Reset, Full
GT Reset and Per-Engine Reset.
vGPU Device Model Level Reset (DMLR) simulates the PCI reset to reset
the whole vGPU to default state as when it is created, including GTT,
execlist, scratch pages, cfg space, mmio space, pvinfo page, scheduler
and fence registers. The ultimate goal of vGPU DMLR is that reuse a
vGPU instance by different virtual machines. When we reassign a vGPU
to a virtual machine we must issue such reset first.
Full GT Reset and Per-Engine GT Reset are soft reset flow for GPU engines
(Render, Blitter, Video, Video Enhancement). It is defined by GPU Spec.
Unlike the FLR, GT reset only reset particular resource of a vGPU per
the reset request. Guest driver can issue a GT reset by programming
the virtual GDRST register to reset specific virtual GPU engine or all
engines.
Since vGPU DMLR and GT reset can share some code so we implement both
these two into one single function intel_gvt_reset_vgpu_locked(). The
parameter dmlr is to identify if we will do FLR or GT reset. The
parameter engine_mask is to specific the engines that need to be
resetted. If value ALL_ENGINES is given for engine_mask, it means
the caller requests a full gt reset that we will reset all virtual
GPU engines.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Reviewed-by: Jike Song <jike.song@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
This patch introduces a new function intel_vgpu_reset_mmio() to
reset vGPU MMIO space (virtual registers of the vGPU). The default
values are loaded as firmware during gvt inititiation.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Move the mmio space inititation function setup_vgpu_mmio()
and cleanup function clean_vgpu_mmio() in vgpu.c to dedicated
source file mmio.c, and rename them as intel_vgpu_init_mmio()
and intel_vgpu_clean_mmio() respectively.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
This patch introduces a new function intel_vgpu_reset_cfg_space()
to reset vGPU configuration space. This function will unmap gttmmio
and aperture if they are mapped before. Then entire cfg space will
be restored to default values.
Currently we only do such reset when vGPU is not owned by any VM
so we simply restore entire cfg space to default value, not following
the PCIe FLR spec that some fields should remain unchanged.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Move the configuration space inititation function setup_vgpu_cfg_space()
in vgpu.c to dedicated source file cfg_space.c, and rename the function
as intel_vgpu_init_cfg_space().
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
This patch introduces a new function intel_vgpu_reset_gtt() to reset
the all GTT related status, including GGTT, PPGTT, scratch page. This
function can free all shadowed PPGTT, clear all GGTT entry, and clear
scratch page to all zero. After this, we can ensure no gtt related
information can be leakaged from one VM to anothor one when assign
vgpu instance across different VMs (not simultaneously).
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
This patch introudces a new function intel_vgpu_reset_resource() to
reset allocated vgpu resources by intel_vgpu_alloc_resource(). So far
we only need clear the fence registers. The function _clear_vgpu_fence()
will reset both virtual and physical fence registers to 0.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
As per edp1.4 spec , alpm is required for psr2 operation as it's
used for all psr2 main link power down management and alpm enable
bit must be set for psr2 operation.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jim Bride <jim.bride@linux.intel.com>
Signed-off-by: vathsala nagaraju <vathsala.nagaraju@intel.com>
Signed-off-by: Patil Deepti <deepti.patil@intel.com>
Reviewed-by: Jim Bride <jim.bride@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1483356663-32668-6-git-send-email-vathsala.nagaraju@intel.com
Screen freeze observed if AUX_FRAME_SYNC is not disabled
on psr2 exit.AUX_FRAME_SYNC needed for psr2 is enabled during
psr2 entry. It must be disabled on psr2 exit.
v2: rebase
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jim Bride <jim.bride@linux.intel.com>
Signed-off-by: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Signed-off-by: Patil Deepti <deepti.patil@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1484147673-2044-1-git-send-email-vathsala.nagaraju@intel.com
Psr1 and psr2 are mutually exclusive,ie when psr2 is enabled,
psr1 should be disabled.When psr2 is exited , bit 31 of reg
PSR2_CTL must be set to 0 but currently bit 31 of SRD_CTL
(psr1 control register)is set to 0.
Also ,PSR2_IDLE state is looked up from SRD_STATUS(psr1 register)
instead of PSR2_STATUS register, which has wrong data, resulting
in blankscreen.
hsw_enable_source is split into hsw_enable_source_psr1 and
hsw_enable_source_psr2 for easier code review and maintenance,
as suggested by rodrigo and jim.
v2: (Rodrigo)
- Rename hsw_enable_source_psr* to intel_enable_source_psr*
v3: (Rodrigo)
- In hsw_psr_disable ,
1) for psr active case, handle psr2 followed by psr1.
2) psr inactive case, handle psr2 followed by psr1
v4:(Rodrigo)
- move psr2 restriction(32X20) to match_conditions function
returning false and fully blocking PSR to a new patch before
this one.
v5: in source_psr2, removed val = EDP_PSR_ENABLE
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jim Bride <jim.bride@linux.intel.com>
Signed-off-by: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Signed-off-by: Patil Deepti <deepti.patil@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1484244059-9201-1-git-send-email-vathsala.nagaraju@intel.com
Program HardMin based on the vce_arbiter.ecclk
if ecclk is 0, disable ECLK DPM 0. Otherwise VCE
could hang if switching SCLK from DPM 0 to 6/7
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Flora Cui <Flora.Cui@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
can fix Bug 191281: vce ib test failed.
when vce idle, set vce clock gate, so the clock
in vce domain will be disabled.
when need to encode, disable vce clock gate,
enable the clocks to vce engine.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Special MC ucode is required for these memory configurations.
Acked-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Special MC ucode is required for these memory configurations.
Acked-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Parameter: good.
Parameter - bad.
One day I'll learn the syntax.
Fixes: 625d988acc ("drm/i915: Extract reserving space in the GTT to a helper")
Fixes: e007b19d7b ("drm/i915: Use the MRU stack search after evicting")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170112164559.27232-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
It was only needed to protect the connector_list walking, see
commit 8c4ccc4ab6
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Thu Jul 9 23:44:26 2015 +0200
drm/probe-helper: Grab mode_config.mutex in poll_init/enable
Unfortunately the commit message of that patch fails to mention that
the new locking check was for the connector_list.
But that requirement disappeared in
commit c36a3254f7
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Thu Dec 15 16:58:43 2016 +0100
drm: Convert all helpers to drm_connector_list_iter
and so we can drop this again.
This fixes a locking inversion on nouveau, where the rpm code needs to
re-enable. But in other places the rpm_get() calls are nested within
the big modeset locks.
While at it, also improve the kerneldoc for these two functions a
notch.
v2: Update the kerneldoc even more to explain that these functions
can't be called concurrently, or bad things happen (Chris).
Cc: Dave Airlie <airlied@gmail.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Lyude <lyude@redhat.com>
Reviewed-by: Lyude <lyude@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170111090117.5134-1-daniel.vetter@ffwll.ch
When dumping the VMA, include the parameters of the different GGTT views
so that we can distinguish them.
v2: Contract output and add MISSING_CASE for any unknown types.
v3: Show both stride and offset for rotated planes.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170112112108.31632-1-chris@chris-wilson.co.uk
The internal object is a collection of struct pages and so is
intrinsically linked to the available physical memory on the machine,
and not an arbitrary type from the uabi. Use phys_addr_t so the link
between size and memory consumption is clear, and then double check that
we don't overflow the maximum object size.
v2: Also assert that size is not zero - a mistake I made a few times
while writing selftests.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170112130431.1844-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Move the GuC invalidation of its ggtt TLB to where we perform the ggtt
modification rather than proliferate it into all the callers of the
insert (which may or may not in fact have to do the insertion).
v2: Just do the guc invalidate unconditionally, (afaict) it has no impact
without the guc loaded on gen8+
v3: Conditionally invalidate the guc - just in case that register has
not been validated for other modes.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170112110050.25333-1-chris@chris-wilson.co.uk
The visible member used to be in intel_plane_state->visible,
but has been moved to drm_plane_state->visible. In the conversion
some casts were left in that are now useless.
to_intel_plane_state(x)->base.visible is the same as x->visible,
so use the latter to clear up the code a little.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1484214225-30328-1-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Since commit c033666a94 ("drm/i915: Store a i915 backpointer from
engine, and use it") i915_reset receives dev_priv, but the kerneldoc
was not updated.
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170112041817.1102-3-michel.thierry@intel.com
And before the function description.
Tidy up from commit 14bb2c1179 ("drm/i915: Fix a buch of kerneldoc
warnings"), all others kerneldoc blocks look ok.
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170112041817.1102-2-michel.thierry@intel.com
The WaDisableLSQCROPERFforOCL workaround has the side effect of
disabling an L3SQ optimization that has huge performance implications
and is unlikely to be necessary for the correct functioning of usual
graphic workloads. Userspace is free to re-enable the workaround on
demand, and is generally in a better position to determine whether the
workaround is necessary than the DRM is (e.g. only during the
execution of compute kernels that rely on both L3 fences and HDC R/W
requests).
The same workaround seems to apply to BDW (at least to production
stepping G1) and SKL as well (the internal workaround database claims
that it does for all steppings, while the BSpec workaround table only
mentions pre-production steppings), but the DRM doesn't do anything
beyond whitelisting the L3SQCREG4 register so userspace can enable it
when it sees fit. Do the same on KBL platforms.
Improves performance of the GFXBench4 gl_manhattan31 benchmark by 60%,
and gl_4 (AKA car chase) by 14% on a KBL GT2 running Mesa master --
This is followed by a regression of 35% and 10% respectively for the
same benchmarks and platform caused by my recent patch series
switching userspace to use the dataport constant cache instead of the
sampler to implement uniform pull constant loads, which caused us to
hit more heavily the L3 cache (and on platforms other than KBL had the
opposite effect of improving performance of the same two benchmarks).
The overall effect on KBL of this change combined with the recent
userspace change is respectively 4.6% and 2.6%. SynMark2 OglShMapPcf
was affected by the constant cache changes (though it improved as it
did on other platforms rather than regressing), but is not
significantly affected by this patch (with statistical significance of
5% and sample size 20).
v2: Drop some more code to avoid unused variable warning.
Fixes: 738fa1b312 ("drm/i915/kbl: Add WaDisableLSQCROPERFforOCL")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99256
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: Eero Tamminen <eero.t.tamminen@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: beignet@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v4.7+
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
[Removed double Fixes tag]
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1484217894-20505-1-git-send-email-mika.kuoppala@intel.com
Since commit 4741da925f ("drm/i915/guc: Assert that all GGTT offsets used
by the GuC are mappable"), we're asserting that GuC firmware is in the
GuC mappable range.
Except we're not pinning the object with bias, which means it's possible
to trigger this assert. Let's add a proper bias.
Fixes: 4741da925f ("drm/i915/guc: Assert that all GGTT offsets used by the GuC are mappable")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Tomi Sarvela <tomi.p.sarvela@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170111151739.28965-1-michal.winiarski@intel.com
This is the deprecated function for when you embedded the framebuffer
somewhere else (which breaks refcounting). But cma helpers are using
drm_framebuffer_remove and a free-standing fb, so this is rendundant.
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1482835765-12044-2-git-send-email-daniel.vetter@ffwll.ch
This is the deprecated function for when you embedded the framebuffer
somewhere else (which breaks refcounting). But omapdrm is using
drm_framebuffer_remove and a free-standing fb, so this is rendundant.
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1482835765-12044-4-git-send-email-daniel.vetter@ffwll.ch
This is the deprecated function for when you embedded the framebuffer
somewhere else (which breaks refcounting). But msm is using
drm_framebuffer_remove and a free-standing fb, so this is rendundant.
Cc: Rob Clark <robdclark@gmail.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1482835765-12044-1-git-send-email-daniel.vetter@ffwll.ch
Check if ppgtt is valid for context when init reg state. For gvt
context which has no i915 allocated ppgtt, failed to check that
would cause kernel null ptr reference error.
v2: remove !48bit ppgtt case as we'll always update before submit (Chris)
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170109131453.3943-1-zhenyuw@linux.intel.com
Since commit fe115628d5 ("drm/i915: Implement pwrite without
struct-mutex") the lowlevel pwrite calls are now called without the
protection of struct_mutex, but pwrite_phys was still asserting that it
held the struct_mutex and later tried to drop and relock it.
Fixes: fe115628d5 ("drm/i915: Implement pwrite without struct-mutex")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <drm-intel-fixes@lists.freedesktop.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170106152240.5793-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
(cherry picked from commit 10466d2a59)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Missed when rebasing patches, I failed to set ret to zero before
starting the unbind loop (which depends upon ret being zero).
Reported-by: Matthew Auld <matthew.william.auld@gmail.com>
Fixes: 9332f3b1b9 ("drm/i915: Combine loops within i915_gem_evict_something")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170105155940.10033-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Cc: <stable@vger.kernel.org> # v4.9+
(cherry picked from commit 121dfbb2a2)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Allows usage of the new page_flip_target hook for drivers implementing
the atomic path.
Provides default atomic helper for the new hook.
v2:
Update code sharing logic between exsiting and the new flip hooks.
Improve kerneldoc.
Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1483735180-4173-1-git-send-email-Andrey.Grodzovsky@amd.com
Trivial fix to spelling mistake, rename kfd_ioctl_dbg_unrgesiter
to kfd_ioctl_dbg_unregister
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
I noticed that the VT switch doesn't work any longer with a Dell
laptop with 1366x768 eDP when the machine is connected with a DP
monitor. It behaves as if VT were switched, but the graphics remain
frozen. Actually the keyboard works, so I could switch back to VT7
again.
I tried to track down the problem, and encountered a long story until
we reach to this error:
- The machine is booted with video=1366x768 option (the distro
installer seems to add it as default).
- Recently, drm_helper_probe_single_connector_modes() deals with
cmdline modes, and it tries to create a new mode when no
matching mode is found.
- The drm_mode_create_from_cmdline_mode() creates a mode based on
either CVT of GFT according to the given cmdline mode; in our case,
it's 1366x768.
- Since both CVT and GFT can't express the width 1366 due to
alignment, the resultant mode becomes 1368x768, slightly larger than
the given size.
- Later on, the atomic commit is performed, and in
drm_atomic_check_only(), the size of each plane is checked.
- The size check of 1366x768 fails due to the above, and eventually
the whole VT switch fails.
Back in the history, we've had a manual fix-up of 1368x768 in various
places via c09dedb7a5 ("drm/edid: Add a workaround for 1366x768 HD
panel"), but they have been all in drm_edid.c at probing the modes
from EDID. For addressing the problem above, we need a similar hack
to the mode newly created from cmdline, manually adjusting the width
when the expected size is 1366 while we get 1368 instead.
Fixes: eaf99c749d ("drm: Perform cmdline mode parsing during...")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20170109145614.29454-1-tiwai@suse.de
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Many DRM drivers only work with an MMU, and after the patch to enable
core DRM support without MMU, we already had one fixup for many of them.
The etnaviv, armada and msm drivers were missed and have the same problem:
warning: (DRM_ETNAVIV) selects IOMMU_SUPPORT which has unmet direct dependencies (MMU)
warning: (DRM_I915 && DRM_MSM && DRM_ETNAVIV) selects SHMEM which has unmet direct dependencies (MMU)
drivers/gpu/drm/armada/armada_gem.o: In function `armada_gem_vm_fault':
armada_gem.c:(.text.armada_gem_vm_fault+0x14): undefined reference to `vm_insert_pfn'
arch/arm/mm/dma-mapping.c: In function '__iommu_alloc_remap':
arch/arm/mm/dma-mapping.c:1390:4: error: 'VM_ARM_DMA_CONSISTENT' undeclared (first use in this function)
arch/arm/mm/dma-mapping.c:1456:31: error: 'atomic_pool' undeclared (first use in this function); did you mean 'atomic_xor'?
Fixes: 011cda5899 ("drm: fix compilations issues introduced by "drm: allow to use mmuless SoC"")
Fixes: 62a0d98a18 ("drm: allow to use mmuless SoC")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170111133357.3664191-2-arnd@arndb.de
Performing an eviction search can be very, very slow especially for a
range restricted replacement. For example, a workload like
gem_concurrent_blit will populate the entire GTT and then cause aperture
thrashing. Since the GTT is a mix of active and inactive tiny objects,
we have to search through almost 400k objects before finding anything
inside the mappable region, and as this search is required before every
operation performance falls off a cliff.
Instead of performing the full search, we do a trial replacement of the
node at a random location fitting the specified restrictions. We lose
the strict LRU property of the GTT in exchange for avoiding the slow
search (several orders of runtime improvement for gem_concurrent_blit
4KiB-global-gtt, e.g. from 5000s to 20s). The loss of LRU replacement is
(later) mitigated firstly by only doing replacement if we find no
freespace and secondly by execbuf doing a PIN_NONBLOCK search first before
it starts thrashing (i.e. the random replacement will only occur from the
already inactive set of objects).
v2: Ascii-art, and check preconditionst
v3: Rephrase final sentence in comment to explain why we don't bother
with if (i915_is_ggtt(vm)) for preferring random replacement.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170111112312.31493-3-chris@chris-wilson.co.uk
When we evict from the GTT to make room for an object, the hole we
create is put onto the MRU stack inside the drm_mm range manager. On the
next search pass, we can speed up a PIN_HIGH allocation by referencing
that stack for the new hole.
v2: Pull together the 3 identical implements (ahem, a couple were
outdated) into a common routine for allocating a node and evicting as
necessary.
v3: Detect invalid calls to i915_gem_gtt_insert()
v4: kerneldoc
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170111112312.31493-1-chris@chris-wilson.co.uk
After rollover of the IOVA space, we want to get a low IOVA address,
otherwise the the games we play by remembering the last IOVA are
pointless. When we search for a free hole with DRM_MM_SEARCH_DEFAULT,
drm_mm will pop the next entry from the free holes stack, which will
likely be a high IOVA. By using DRM_MM_SEARCH_BELOW we can trick
drm_mm into reversing the search and provide us with a low IOVA.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Wladimir van der Laan <laanwj@gmail.com>
drivers/gpu/drm/selftests/test-drm_mm.c:1277 evict_everything()
warn: calling list_del() inside list_for_each
The list_del() inside the error handling in the eviction loop is
overkill. We have to undo the eviction scan to return the drm_mm back to
a recoverable state, so have to iterate over the full list, but we only
want to report the error once and once we have an error we can return
early.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 560b328429 ("drm: kselftest for drm_mm and eviction")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170110144031.7609-1-chris@chris-wilson.co.uk
Start converting over from the byte count to its semantic macro, either
we want to allocate the size of a physical page in main memory or we
want the size of a virtual page in the GTT. 4096 could mean either, but
PAGE_SIZE and I915_GTT_PAGE_SIZE are explicit and should help improve
code comprehension and future changes. In the future, we may want to use
variable GTT page sizes and so have the challenge of knowing which
hardcoded values were used to represent a physical page vs the virtual
page.
v2: Look for a few more 4096s to convert, discover IS_ALIGNED().
v3: 4096ul paranoia, make fence alignment a distinct value of 4096, keep
bdw stolen w/a as 4096 until we know better.
v4: Add asserts that i915_vma_insert() start/end are aligned to GTT page
sizes.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170110144734.26052-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
It has been some time since i915_gem_engine_cleanup was only called from
the module unload path, and now it is only called when the GPU is
wedged. Mika complained that the name is confusing, especially in light
of the existence of i915_gem_cleanup_engines().
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170110172246.27297-5-chris@chris-wilson.co.uk
Similarly to a normal reset, after we mark the GPU as wedged (completely
fubar and no more requests can be executed), set the error status on all
the in flight requests.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170110172246.27297-4-chris@chris-wilson.co.uk
Let userspace know if its request was resubmitted due to it being
executed at the time of a global reset. In this case, the reset was for
a guilty request on another engine, and this request was an innocent
victim that will be re-executed upon restarting. However, since it was
running at the time of the reset, we can not guarantee that it suffered
no ill-effects from the reset (e.g. some context state may be lost, or
some self-modifying fragment shaders will be restarted from the final
state not their initial state), to let userspace know that it has been
corrupted set a special value on the fence->error, -EAGAIN.
If the request does hang on resubmission, the error will be overwritten
with -EIO.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170110172246.27297-3-chris@chris-wilson.co.uk
The struct dma_fence carries a status field exposed to userspace by
sync_file. This is inspected after the fence is signaled and can convey
whether or not the request completed successfully, or in our case if we
detected a hang during the request (signaled via -EIO in
SYNC_IOC_FILE_INFO).
v2: Mark all cancelled requests as failed.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170110172246.27297-2-chris@chris-wilson.co.uk
Always reset the requests of the guilty context, including the hung
request that we tell the hardware to skip. This should help if the
reprogram fails entirely, but more importantly makes the guilty path
more uniform (and simplifies the subsequent patch to tweak the cancelled
requests).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170110172246.27297-1-chris@chris-wilson.co.uk
Use drm_accurate_vblank_count so we have the full 32 bit to represent
the frame counter and userspace has a simpler way of knowing when the
counter wraps around.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Robert Foss <robert.foss@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170110134305.26326-3-tomeu.vizoso@collabora.com
The core provides now an ABI to userspace for generation of frame CRCs,
so implement the ->set_crc_source() callback and reuse as much code as
possible with the previous ABI implementation.
When handling the pageflip interrupt, we skip 1 or 2 frames depending on
the HW because they contain wrong values. For the legacy ABI for
generating frame CRCs, this was done in userspace but now that we have a
generic ABI it's better if it's not exposed by the kernel.
v2:
- Leave the legacy implementation in place as the ABI implementation
in the core is incompatible with it.
v3:
- Use the "cooked" vblank counter so we have a whole 32 bits.
- Make sure we don't mess with the state of the legacy CRC capture
ABI implementation.
v4:
- Keep use of get_vblank_counter as in the legacy code, will be
changed in a followup commit.
v5:
- Skip first frame or two as it's known that they contain wrong
data.
- A few fixes suggested by Emil Velikov.
v6:
- Rework programming of the HW registers to preserve previous
behavior.
v7:
- Address whitespace issue.
- Added a comment on why in the implementation of the new ABI we
skip the 1st or 2nd frames.
v9:
- Add stub for intel_crtc_set_crc_source.
v12:
- Rebased.
- Remove stub for intel_crtc_set_crc_source and instead set the
callback to NULL (Jani Nikula).
v15:
- Rebased.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Robert Foss <robert.foss@collabora.com>
irq
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170110134305.26326-2-tomeu.vizoso@collabora.com
Pull in latest drm-next from Dave Airlie to get at all the drm-misc
goodies, specifically:
- dma_fence error state handling rework (Chris needs that for error
recovery)
- crc support locking changes (Tomeu's i915 crc patches need that).
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Also update Kconfig help text, explaining things:
Cirrus is obsolete, the hardware was designed in the 90ies
and can't keep up with todays needs. More background:
https://www.kraxel.org/blog/2014/10/qemu-using-cirrus-considered-harmful/
Better alternatives are:
- stdvga (DRM_BOCHS, qemu -vga std, default in qemu 2.2+)
- qxl (DRM_QXL, qemu -vga qxl, works best with spice)
- virtio (VIRTIO_GPU), qemu -vga virtio)
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
virtio uses normal ram as backing storage for the framebuffer, so we
should assign the address to new screen_buffer (added by commit
17a7b0b4d9) instead of screen_base.
Reported-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The VMA is later clipped against the vm_area_struct before insertion of
the faulting PTE so we are free to create the partial view as we desire.
If we use the object as the extents rather than the area, this partial
can then be used for other areas.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170110095633.6612-2-chris@chris-wilson.co.uk
Instead of scheduling the work to handle the initial delayed event, use 1s
delay.
This delay should not be needed, but Optimus/nouveau will fail in a
mysterious way if the delayed event is handled as soon as possible like it
is done in drm_helper_probe_single_connector_modes() in case the poll
was enabled before.
Reverting 339fd36238 would give back the 10 sec (!) delay to handle the
delayed event. Adding 1sec delay to the poll_work is enough to work around
the issue in Optimus setups and gives shorter response on handling the
initial delayed event.
Fixes: 339fd36238 ("drm: drm_probe_helper: Fix output_poll_work scheduling")
Cc: stable@vger.kernel.org # v4.9
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
[danvet: Add FIXME to the comment to make it stick out more.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170109143158.21917-1-peter.ujfalusi@ti.com
Declare exynos_drm_crtc_ops structures as const as they are only passed
as an argument to the function exynos_drm_crtc_create. This argument is
of type const struct exynos_drm_crtc_ops *, so exynos_drm_crtc_ops
structures having this property can be declared const.
Done using Coccinelle:
@r disable optional_qualifier@
identifier i;
position p;
@@
static struct exynos_drm_crtc_ops i@p={...};
@ok@
position p;
identifier r.i;
@@
exynos_drm_crtc_create(...,&i@p,...)
@bad@
position p!={r.p,ok.p};
identifier r.i;
@@
i@p
@depends on !bad disable optional_qualifier@
identifier r.i;
@@
+const
struct exynos_drm_crtc_ops i;
File size before:
text data bss dec hex filename
5008 280 0 5288 14a8 exynos/exynos5433_drm_decon.o
File size after:
text data bss dec hex filename
5120 176 0 5296 14b0 exynos/exynos5433_drm_decon.o
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1483984493-25284-1-git-send-email-bhumirks@gmail.com
Continue to clean up drmP.h by moving the cache flushing functions into
it's own header file.
Compile-tested only
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170109215649.6860-2-krisman@collabora.co.uk
Notice that this uncovers an issue with the kernel-doc handling of array
arguments, causing the first parameter of drm_clflush_pages() to not
show up in the rst-generated page. A proposed fix is under review in
linux-doc: <http://www.spinics.net/lists/linux-doc/msg42544.html>
Changes since v1:
- Add section to drm-mm.rst.
- Fix kernel-doc style issues.
- s/memory/kernel memory/.
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170109215649.6860-1-krisman@collabora.co.uk
Commit cc3f90f063 ("drm/i915/glk: Reuse broxton code for geminilake")
missed a few of occurences of IS_BROXTON() that should have been
coverted to IS_GEN9_LP().
v2: Cite the right commit. (Ander)
Fixes: cc3f90f063 ("drm/i915/glk: Reuse broxton code for geminilake")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Tomasz Lis <tomasz.lis@intel.com> (v1)
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1483973495-15138-1-git-send-email-ander.conselvan.de.oliveira@intel.com
Rename i915_gem_get_ggtt_size() and i915_gem_get_ggtt_alignment() to
i915_gem_fence_size() and i915_gem_fence_alignment() respectively to
better match usage. Similarly move the pair of functions into
i915_gem_tiling.c next to the fence restrictions.
Suggested-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170109161613.11881-6-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Restricting the fence to the end of the previous tile-row breaks access
to the final portion of the object. On gen2/3 we employed lazy fencing
to pad out the fence with scratch page to provide access to the tail,
and now we also pad out the object on gen4+ we can apply the same fix.
Fixes: af1a7301c7 ("drm/i915: Only fence tiled region of object.")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170109161613.11881-5-chris@chris-wilson.co.uk
The fence size/alignment is a combination of the vma size plus object
tiling parameters. Those parameters are rarely changed, making the fence
size/alignemnt roughly constant for the lifetime of the VMA. We can
simplify subsequent calculations by precalculating the size/alignment
required for GGTT vma taking fencing into account (with an update if we
do change the tiling or stride).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170109161613.11881-4-chris@chris-wilson.co.uk
All of these conditions are prechecked by i915_tiling_ok() before we
allow setting the tiling/stride on the object and so we should never
fail asserting those conditions before writing the register.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170109161613.11881-3-chris@chris-wilson.co.uk
Thomas Hellstrom