A newly initialized device defaults to ISOLATION_MODE_NONE, don't bother
with programming this a second time.
Then remove the OSD/OSX check, it's already done in the sysfs path
whenever the user actually changes the configuration.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If we cancel all pending cmds (eg. when tearing down the device), don't
blame it on an IO error.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rather than delaying the decision until netdev setup, immediately reject
a device when we discover that it has an unsupported link type
(ie. Token Ring).
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rework of the QCI crypto info and how it is used.
This is only a internal rework but does not affect the way
how the ap bus acts with ap card and queue devices and
domain handling.
Tested on z15, z14, z12 (QCI support) and z196 (no QCI support).
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl8CYDYeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGcQkH/2vOsPf79yWtsc7x
hd2LpCPfrm7T1xlQcYcXbEbyRI8sqPmguixO8pRI1ePl2lBZ7KurfyeYgYZNGpFU
t74Ph6A6dSWoCgO68Genm/SQuK8ic6o9n1Vr8tDsGDp5KlHWNaweq4JwHrsPmO1T
cI0PR/ClAhLG8cQZ4x988Es5HTNGY17XK27e+M/zKYxSMGY2NRdJBGQIq964i5Q8
2d9G0rtVCaVDzgjrLwaFm6RBu21Il7HV6KsBsacyTFiL1ywx2vnUHzeZQyvuJSOQ
4YpLo9v4tBP10WHC50LRStZyO0qRwPVd/Yl7fL4R/CKsJT9H4uiwasVoEBVSL/k6
CUn3JL0=
=P/Vx
-----END PGP SIGNATURE-----
Merge tag 'v5.8-rc4' into for-5.9/drivers
Merge in 5.8-rc4 for-5.9/block to setup for-5.9/drivers, to provide
a clean base and making the life for the NVMe changes easier.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
* tag 'v5.8-rc4': (732 commits)
Linux 5.8-rc4
x86/ldt: use "pr_info_once()" instead of open-coding it badly
MIPS: Do not use smp_processor_id() in preemptible code
MIPS: Add missing EHB in mtc0 -> mfc0 sequence for DSPen
.gitignore: Do not track `defconfig` from `make savedefconfig`
io_uring: fix regression with always ignoring signals in io_cqring_wait()
x86/ldt: Disable 16-bit segments on Xen PV
x86/entry/32: Fix #MC and #DB wiring on x86_32
x86/entry/xen: Route #DB correctly on Xen PV
x86/entry, selftests: Further improve user entry sanity checks
x86/entry/compat: Clear RAX high bits on Xen PV SYSENTER
i2c: mlxcpld: check correct size of maximum RECV_LEN packet
i2c: add Kconfig help text for slave mode
i2c: slave-eeprom: update documentation
i2c: eg20t: Load module automatically if ID matches
i2c: designware: platdrv: Set class based on DMI
i2c: algo-pca: Add 0x78 as SCL stuck low status for PCA9665
mm/page_alloc: fix documentation error
vmalloc: fix the owner argument for the new __vmalloc_node_range callers
mm/cma.c: use exact_nid true to fix possible per-numa cma leak
...
zfcp_qdio_send() and zfcp_qdio_int_req() run concurrently, adding and
completing SBALs on the Request Queue. There's a theoretical race where
zfcp_qdio_int_req() completes a number of SBALs & increments the queue's
free-level _before_ zfcp_qdio_send() was able to decrement it.
This can cause ->req_q_free to momentarily hold a value larger than
QDIO_MAX_BUFFERS_PER_Q. Luckily zfcp_qdio_send() is always called under
->req_q_lock, and all readers of the free-level also take this lock. So we
can trust that zfcp_qdio_send() will clean up such a temporary overflow
before anyone can actually observe it.
But it's still confusing and annoying to worry about. So adjust the code to
avoid this race.
Link: https://lore.kernel.org/r/7f61f59a1f8db270312e64644f9173b8f1ac895f.1593780621.git.bblock@linux.ibm.com
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Instead of manually moving each element of the unit and port lists into our
temporary on-stack lists, splice them over in one go.
Link: https://lore.kernel.org/r/cacb179f49ece50fd4dce119c61252d632cdc1d4.1593780621.git.bblock@linux.ibm.com
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
We already maintain a pointer to act->adapter. Use it consistently to avoid
any confusion about whose ->erp_ready_head and ->erp_ready_wq we are
accessing.
Link: https://lore.kernel.org/r/d1bb04322f240dee32f4c4a551bc93bc736f4b01.1593780621.git.bblock@linux.ibm.com
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
We don't need crypto-grade random numbers for randomized backoffs. Instead
use prandom_u32_max(ep_ro) which generates a pseudo-random number uniformly
distributed in the interval [0, ep_ro).
Link: https://lore.kernel.org/r/8fc7c4c4069ff1783f4a9ccd84a923f581a09ec5.1593780621.git.bblock@linux.ibm.com
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: George Spelvin <lkml@sdf.org>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Include linux/slab.h to fix a build error due to kfree() being undefined.
Fixes: 3f02cb2fd9 ("vfio-ccw: Wire up the CRW irq and CRW region")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200703022628.6036-1-sean.j.christopherson@intel.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This patch introduces the sysfs attributes serialnr and
mkvps for cex2c and cex3c cards. These sysfs attributes
are available for cex4c and higher since
commit 7c4e91c095 ("s390/zcrypt: new sysfs attributes serialnr and mkvps")'
and this patch now provides the same for the older cex2
and cex3 cards.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
There is a state machine held for each ap queue device.
The states and functions related to this where somethimes
noted with _sm_ somethimes without. This patch clarifies
and renames all the ap queue state machine related functions,
enums and defines to have a _sm_ in the name.
There is no functional change coming with this patch - it's
only beautifying code.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
The zcrpyt_unlocked_ioctl() function has become large. So split away
into new static functions the 4 ioctl ICARSAMODEXPO, ICARSACRT,
ZSECSENDCPRB and ZSENDEP11CPRB. This makes the code more readable and
is a preparation step for further improvements needed on these ioctls.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Some beautifications related to the internal only used
struct ap_message and related code. Instead of one int carrying
only the special flag now a u32 flags field is used.
At struct CPRBX the pointers to additional data are now marked
with __user. This caused some changes needed on code, where
these structs are also used within the zcrypt misc functions.
The ica_rsa_* structs now use the generic types __u8, __u32, ...
instead of char, unsigned int.
zcrypt_msg6 and zcrypt_msg50 use min_t() instead of min().
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
In an effort to enable -Wcast-function-type in the top-level Makefile to
support Control Flow Integrity builds, remove all the function callback
casts.
To do this modify the function prototypes accordingly.
Signed-off-by: Oscar Carter <oscar.carter@gmx.com>
Message-Id: <20200627125417.18887-1-oscar.carter@gmx.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
[heiko.carstens@de.ibm.com: coding style changes]
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
bd_block_size contains a value that matches the logic block size when
opening, so the statement is redundant. Even if it wasn't the dumb
assignment would cause a a mismatch with bd_inode->i_blkbits.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The make_request_fn is a little weird in that it sits directly in
struct request_queue instead of an operation vector. Replace it with
a block_device_operations method called submit_bio (which describes much
better what it does). Also remove the request_queue argument to it, as
the queue can be derived pretty trivially from the bio.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The queue can be trivially derived from the bio, so pass one less
argument.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove unused /sys/kernel/debug/zcore/memmap device.
Since at least version 1.24.0 of s390-tools zfcpdump no longer
needs it and reads /proc/vmcore instead.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Six small fixes, five in drivers and one to correct another minor
regression from cc97923a5b ("block: move dma drain handling to
scsi") where we still need the drain stub to be built in to the kernel
for the modular libata, non-modular SAS driver case.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXvdzJCYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishZ9rAQDyfZbP
IIIqNRr8MSBVxnb50LjmLl4NZH7xWzjch0oRfwD/ZS/QRoe/nNQUsiW65yK83ueC
QBz3bxQWAwKm0yFGzqY=
=gHK+
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Six small fixes, five in drivers and one to correct another minor
regression from cc97923a5b ("block: move dma drain handling to
scsi") where we still need the drain stub to be built in to the kernel
for the modular libata, non-modular SAS driver case"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: mptscsih: Fix read sense data size
scsi: zfcp: Fix panic on ERP timeout for previously dismissed ERP action
scsi: lpfc: Avoid another null dereference in lpfc_sli4_hba_unset()
scsi: libata: Fix the ata_scsi_dma_need_drain stub
scsi: qla2xxx: Keep initiator ports after RSCN
scsi: qla2xxx: Set NVMe status code for failed NVMe FCP request
Pull networking fixes from David Miller:
1) Don't insert ESP trailer twice in IPSEC code, from Huy Nguyen.
2) The default crypto algorithm selection in Kconfig for IPSEC is out
of touch with modern reality, fix this up. From Eric Biggers.
3) bpftool is missing an entry for BPF_MAP_TYPE_RINGBUF, from Andrii
Nakryiko.
4) Missing init of ->frame_sz in xdp_convert_zc_to_xdp_frame(), from
Hangbin Liu.
5) Adjust packet alignment handling in ax88179_178a driver to match
what the hardware actually does. From Jeremy Kerr.
6) register_netdevice can leak in the case one of the notifiers fail,
from Yang Yingliang.
7) Use after free in ip_tunnel_lookup(), from Taehee Yoo.
8) VLAN checks in sja1105 DSA driver need adjustments, from Vladimir
Oltean.
9) tg3 driver can sleep forever when we get enough EEH errors, fix from
David Christensen.
10) Missing {READ,WRITE}_ONCE() annotations in various Intel ethernet
drivers, from Ciara Loftus.
11) Fix scanning loop break condition in of_mdiobus_register(), from
Florian Fainelli.
12) MTU limit is incorrect in ibmveth driver, from Thomas Falcon.
13) Endianness fix in mlxsw, from Ido Schimmel.
14) Use after free in smsc95xx usbnet driver, from Tuomas Tynkkynen.
15) Missing bridge mrp configuration validation, from Horatiu Vultur.
16) Fix circular netns references in wireguard, from Jason A. Donenfeld.
17) PTP initialization on recovery is not done properly in qed driver,
from Alexander Lobakin.
18) Endian conversion of L4 ports in filters of cxgb4 driver is wrong,
from Rahul Lakkireddy.
19) Don't clear bound device TX queue of socket prematurely otherwise we
get problems with ktls hw offloading, from Tariq Toukan.
20) ipset can do atomics on unaligned memory, fix from Russell King.
21) Align ethernet addresses properly in bridging code, from Thomas
Martitz.
22) Don't advertise ipv4 addresses on SCTP sockets having ipv6only set,
from Marcelo Ricardo Leitner.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (149 commits)
rds: transport module should be auto loaded when transport is set
sch_cake: fix a few style nits
sch_cake: don't call diffserv parsing code when it is not needed
sch_cake: don't try to reallocate or unshare skb unconditionally
ethtool: fix error handling in linkstate_prepare_data()
wil6210: account for napi_gro_receive never returning GRO_DROP
hns: do not cast return value of napi_gro_receive to null
socionext: account for napi_gro_receive never returning GRO_DROP
wireguard: receive: account for napi_gro_receive never returning GRO_DROP
vxlan: fix last fdb index during dump of fdb with nhid
sctp: Don't advertise IPv4 addresses if ipv6only is set on the socket
tc-testing: avoid action cookies with odd length.
bpf: tcp: bpf_cubic: fix spurious HYSTART_DELAY exit upon drop in min RTT
tcp_cubic: fix spurious HYSTART_DELAY exit upon drop in min RTT
net: dsa: sja1105: fix tc-gate schedule with single element
net: dsa: sja1105: recalculate gating subschedule after deleting tc-gate rules
net: dsa: sja1105: unconditionally free old gating config
net: dsa: sja1105: move sja1105_compose_gating_subschedule at the top
net: macb: free resources on failure path of at91ether_open()
net: macb: call pm_runtime_put_sync on failure path
...
Move the call to blk_should_fake_timeout out of blk_mq_complete_request
and into the drivers, skipping call sites that are obvious error
handlers, and remove the now superflous blk_mq_force_complete_rq helper.
This ensures we don't keep injecting errors into completions that just
terminate the Linux request after the hardware has been reset or the
command has been aborted.
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Suppose that, for unrelated reasons, FSF requests on behalf of recovery are
very slow and can run into the ERP timeout.
In the case at hand, we did adapter recovery to a large degree. However
due to the slowness a LUN open is pending so the corresponding fc_rport
remains blocked. After fast_io_fail_tmo we trigger close physical port
recovery for the port under which the LUN should have been opened. The new
higher order port recovery dismisses the pending LUN open ERP action and
dismisses the pending LUN open FSF request. Such dismissal decouples the
ERP action from the pending corresponding FSF request by setting
zfcp_fsf_req->erp_action to NULL (among other things)
[zfcp_erp_strategy_check_fsfreq()].
If now the ERP timeout for the pending open LUN request runs out, we must
not use zfcp_fsf_req->erp_action in the ERP timeout handler. This is a
problem since v4.15 commit 75492a5156 ("s390/scsi: Convert timers to use
timer_setup()"). Before that we intentionally only passed zfcp_erp_action
as context argument to zfcp_erp_timeout_handler().
Note: The lifetime of the corresponding zfcp_fsf_req object continues until
a (late) response or an (unrelated) adapter recovery.
Just like the regular response path ignores dismissed requests
[zfcp_fsf_req_complete() => zfcp_fsf_protstatus_eval() => return early] the
ERP timeout handler now needs to ignore dismissed requests. So simply
return early in the ERP timeout handler if the FSF request is marked as
dismissed in its status flags. To protect against the race where
zfcp_erp_strategy_check_fsfreq() dismisses and sets
zfcp_fsf_req->erp_action to NULL after our previous status flag check,
return early if zfcp_fsf_req->erp_action is NULL. After all, the former
ERP action does not need to be woken up as that was already done as part of
the dismissal above [zfcp_erp_action_dismiss()].
This fixes the following panic due to kernel page fault in IRQ context:
Unable to handle kernel pointer dereference in virtual kernel address space
Failing address: 0000000000000000 TEID: 0000000000000483
Fault in home space mode while using kernel ASCE.
AS:000009859238c00b R2:00000e3e7ffd000b R3:00000e3e7ffcc007 S:00000e3e7ffd7000 P:000000000000013d
Oops: 0004 ilc:2 [#1] SMP
Modules linked in: ...
CPU: 82 PID: 311273 Comm: stress Kdump: loaded Tainted: G E X ...
Hardware name: IBM 8561 T01 701 (LPAR)
Krnl PSW : 0404c00180000000 001fffff80549be0 (zfcp_erp_notify+0x40/0xc0 [zfcp])
R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3
Krnl GPRS: 0000000000000080 00000e3d00000000 00000000000000f0 0000000000030000
000000010028e700 000000000400a39c 000000010028e700 00000e3e7cf87e02
0000000010000000 0700098591cb67f0 0000000000000000 0000000000000000
0000033840e9a000 0000000000000000 001fffe008d6bc18 001fffe008d6bbc8
Krnl Code: 001fffff80549bd4: a7180000 lhi %r1,0
001fffff80549bd8: 4120a0f0 la %r2,240(%r10)
#001fffff80549bdc: a53e0003 llilh %r3,3
>001fffff80549be0: ba132000 cs %r1,%r3,0(%r2)
001fffff80549be4: a7740037 brc 7,1fffff80549c52
001fffff80549be8: e320b0180004 lg %r2,24(%r11)
001fffff80549bee: e31020e00004 lg %r1,224(%r2)
001fffff80549bf4: 412020e0 la %r2,224(%r2)
Call Trace:
[<001fffff80549be0>] zfcp_erp_notify+0x40/0xc0 [zfcp]
[<00000985915e26f0>] call_timer_fn+0x38/0x190
[<00000985915e2944>] expire_timers+0xfc/0x190
[<00000985915e2ac4>] run_timer_softirq+0xec/0x218
[<0000098591ca7c4c>] __do_softirq+0x144/0x398
[<00000985915110aa>] do_softirq_own_stack+0x72/0x88
[<0000098591551b58>] irq_exit+0xb0/0xb8
[<0000098591510c6a>] do_IRQ+0x82/0xb0
[<0000098591ca7140>] ext_int_handler+0x128/0x12c
[<0000098591722d98>] clear_subpage.constprop.13+0x38/0x60
([<000009859172ae4c>] clear_huge_page+0xec/0x250)
[<000009859177e7a2>] do_huge_pmd_anonymous_page+0x32a/0x768
[<000009859172a712>] __handle_mm_fault+0x88a/0x900
[<000009859172a860>] handle_mm_fault+0xd8/0x1b0
[<0000098591529ef6>] do_dat_exception+0x136/0x3e8
[<0000098591ca6d34>] pgm_check_handler+0x1c8/0x220
Last Breaking-Event-Address:
[<001fffff80549c88>] zfcp_erp_timeout_handler+0x10/0x18 [zfcp]
Kernel panic - not syncing: Fatal exception in interrupt
Link: https://lore.kernel.org/r/20200623140242.98864-1-maier@linux.ibm.com
Fixes: 75492a5156 ("s390/scsi: Convert timers to use timer_setup()")
Cc: <stable@vger.kernel.org> #4.15+
Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When a device is configured with ISOLATION_MODE_FWD, traffic never goes
through the internal switch. Don't apply the offload restrictions in
this case.
Fixes: c619e9a6f5 ("s390/qeth: don't use restricted offloads for local traffic")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Current(?) OSA devices also store their cmd-specific return codes for
SET_ACCESS_CONTROL cmds into the top-level cmd->hdr.return_code.
So once we added stricter checking for the top-level field a while ago,
none of the error logic that rolls back the user's configuration to its
old state is applied any longer.
For this specific cmd, go back to the old model where we peek into the
cmd structure even though the top-level field indicated an error.
Fixes: 686c97ee29 ("s390/qeth: fix error handling in adapter command callbacks")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The way we produce SBALs to the device (first update q->nr_buf_used,
then update the SLSB) should ensure that we never see some of the
SLSB states when scanning the queue for progress.
So make some noise if we do, this implies a bug in our SBAL tracking.
Also tweak the WARN msg to provide more information.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
This removes the last remaining accesses to ->qdio_data from internal
code. Just pass the qdio_irq struct where needed instead.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
This patch fixes below warning reported by coccicheck
drivers/s390/crypto/zcrypt_ep11misc.c:198:8-15: WARNING:
kzalloc should be used for cprb, instead of kmalloc/memset
Link: https://lkml.kernel.org/r/1587472548-105240-1-git-send-email-zou_wei@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Support for hibernation on s390 has been recently been removed with
commit 394216275c ("s390: remove broken hibernate / power management
support"), no need to keep unused code around.
Link: https://lkml.kernel.org/r/20200526093629.257649-1-cohuck@redhat.com
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Streamline the processing of QDIO Input Queues, and remove some
intermittent SLSB updates (no deleting of old ACKs, no redundant
transitions through NOT_INIT).
Rather than counting ACKs, we now keep track of the whole batch of
SBALs that were completed during the current polling cycle.
Most completed SBALs stay in their initial state (ie. PRIMED or ERROR),
except that the most recent SBAL in each sub-run is ACKed for
IRQ reduction.
The only logic changes happen in inbound_handle_work(), the other
delta is just a renaming of the variables that track the SBAL batch.
Note that in particular we don't need to flip the _oldest_ SBAL to
an idle state (eg. NOT_INIT or ACKed) as a guard against catching our
own tail. Since get_inbound_buffer_frontier() will never scan more than
the remaining nr_buf_used SBALs, this scenario just doesn't occur.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
xchg() for a single-byte location assembles to a 4-byte Compare&Swap,
wrapped into a non-trivial amount of retry code that deals with
concurrent modifications to the unaffected bytes.
Change it to a simple byte-store, but preserve the memory ordering
semantics that the CS provided.
This simplifies the generated code for a hot path, and in theory also
allows us to amortize the memory barriers over multiple SLSB updates.
CC: Andreas Krebbel <krebbel@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
- Add support for multi-function devices in pci code.
- Enable PF-VF linking for architectures using the
pdev->no_vf_scan flag (currently just s390).
- Add reipl from NVMe support.
- Get rid of critical section cleanup in entry.S.
- Refactor PNSO CHSC (perform network subchannel operation) in cio
and qeth.
- QDIO interrupts and error handling fixes and improvements, more
refactoring changes.
- Align ioremap() with generic code.
- Accept requests without the prefetch bit set in vfio-ccw.
- Enable path handling via two new regions in vfio-ccw.
- Other small fixes and improvements all over the code.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAl7eVGcACgkQjYWKoQLX
FBhweQgAkicvx31x230rdfG+jQkQkl0UqF99vvWrJHEll77SqadfjzKAGIjUB+K0
EoeHVD5Wcj7BogDGcyHeQ0bZpu4WzE+y1nmnrsvu7TEEvcBmkJH0rF2jF+y0sb/O
3qvwFkX/CB5OqaMzKC/AEeRpcCKR+ZUXkWu1irbYth7CBXaycD9EAPc4cj8CfYGZ
r5njUdYOVk77TaO4aV+t5pCYc5TCRJaWXSsWaAv/nuLcIqsFBYOy2q+L47zITGXp
utZVanIDjzx+ikpaKicOIfC3hJsRuNX9MnlZKsQFwpVEZAUZmIUm29XdhGJTWSxU
RV7m1ORINbFP1nGAqWqkOvGo/LC0ZA==
=VhXR
-----END PGP SIGNATURE-----
Merge tag 's390-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Add support for multi-function devices in pci code.
- Enable PF-VF linking for architectures using the pdev->no_vf_scan
flag (currently just s390).
- Add reipl from NVMe support.
- Get rid of critical section cleanup in entry.S.
- Refactor PNSO CHSC (perform network subchannel operation) in cio and
qeth.
- QDIO interrupts and error handling fixes and improvements, more
refactoring changes.
- Align ioremap() with generic code.
- Accept requests without the prefetch bit set in vfio-ccw.
- Enable path handling via two new regions in vfio-ccw.
- Other small fixes and improvements all over the code.
* tag 's390-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (52 commits)
vfio-ccw: make vfio_ccw_regops variables declarations static
vfio-ccw: Add trace for CRW event
vfio-ccw: Wire up the CRW irq and CRW region
vfio-ccw: Introduce a new CRW region
vfio-ccw: Refactor IRQ handlers
vfio-ccw: Introduce a new schib region
vfio-ccw: Refactor the unregister of the async regions
vfio-ccw: Register a chp_event callback for vfio-ccw
vfio-ccw: Introduce new helper functions to free/destroy regions
vfio-ccw: document possible errors
vfio-ccw: Enable transparent CCW IPL from DASD
s390/pci: Log new handle in clp_disable_fh()
s390/cio, s390/qeth: cleanup PNSO CHSC
s390/qdio: remove q->first_to_kick
s390/qdio: fix up qdio_start_irq() kerneldoc
s390: remove critical section cleanup from entry.S
s390: add machine check SIGP
s390/pci: ioremap() align with generic code
s390/ap: introduce new ap function ap_get_qdev()
Documentation/s390: Update / remove developerWorks web links
...
This series consists of the usual driver updates (qla2xxx, ufs, zfcp,
target, scsi_debug, lpfc, qedi, qedf, hisi_sas, mpt3sas) plus a host
of other minor updates. There are no major core changes in this
series apart from a refactoring in scsi_lib.c.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXtq5QyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishXyGAQCipTWx
7kHKHZBCVTU133bADt3+SstLrAm8PKZEXMnP9wEAzu4QkkW8URxEDRrpu7qk5gbA
9M/KyqvfRtTH7+BSK7M=
=J6aO
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
:This series consists of the usual driver updates (qla2xxx, ufs, zfcp,
target, scsi_debug, lpfc, qedi, qedf, hisi_sas, mpt3sas) plus a host
of other minor updates.
There are no major core changes in this series apart from a
refactoring in scsi_lib.c"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (207 commits)
scsi: ufs: ti-j721e-ufs: Fix unwinding of pm_runtime changes
scsi: cxgb3i: Fix some leaks in init_act_open()
scsi: ibmvscsi: Make some functions static
scsi: iscsi: Fix deadlock on recovery path during GFP_IO reclaim
scsi: ufs: Fix WriteBooster flush during runtime suspend
scsi: ufs: Fix index of attributes query for WriteBooster feature
scsi: ufs: Allow WriteBooster on UFS 2.2 devices
scsi: ufs: Remove unnecessary memset for dev_info
scsi: ufs-qcom: Fix scheduling while atomic issue
scsi: mpt3sas: Fix reply queue count in non RDPQ mode
scsi: lpfc: Fix lpfc_nodelist leak when processing unsolicited event
scsi: target: tcmu: Fix a use after free in tcmu_check_expired_queue_cmd()
scsi: vhost: Notify TCM about the maximum sg entries supported per command
scsi: qla2xxx: Remove return value from qla_nvme_ls()
scsi: qla2xxx: Remove an unused function
scsi: iscsi: Register sysfs for iscsi workqueue
scsi: scsi_debug: Parser tables and code interaction
scsi: core: Refactor scsi_mq_setup_tags function
scsi: core: Fix incorrect usage of shost_for_each_device
scsi: qla2xxx: Fix endianness annotations in source files
...
Fixes the following sparse warnings:
drivers/s390/cio/vfio_ccw_chp.c:62:30: warning: symbol 'vfio_ccw_schib_region_ops' was not declared. Should it be static?
drivers/s390/cio/vfio_ccw_chp.c:117:30: warning: symbol 'vfio_ccw_crw_region_ops' was not declared. Should it be static?
Link: https://lkml.kernel.org/r/patch.git-a34be7aede18.your-ad-here.call-01591269421-ext-5655@work.hours
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Pull networking updates from David Miller:
1) Allow setting bluetooth L2CAP modes via socket option, from Luiz
Augusto von Dentz.
2) Add GSO partial support to igc, from Sasha Neftin.
3) Several cleanups and improvements to r8169 from Heiner Kallweit.
4) Add IF_OPER_TESTING link state and use it when ethtool triggers a
device self-test. From Andrew Lunn.
5) Start moving away from custom driver versions, use the globally
defined kernel version instead, from Leon Romanovsky.
6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin.
7) Allow hard IRQ deferral during NAPI, from Eric Dumazet.
8) Add sriov and vf support to hinic, from Luo bin.
9) Support Media Redundancy Protocol (MRP) in the bridging code, from
Horatiu Vultur.
10) Support netmap in the nft_nat code, from Pablo Neira Ayuso.
11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina
Dubroca. Also add ipv6 support for espintcp.
12) Lots of ReST conversions of the networking documentation, from Mauro
Carvalho Chehab.
13) Support configuration of ethtool rxnfc flows in bcmgenet driver,
from Doug Berger.
14) Allow to dump cgroup id and filter by it in inet_diag code, from
Dmitry Yakunin.
15) Add infrastructure to export netlink attribute policies to
userspace, from Johannes Berg.
16) Several optimizations to sch_fq scheduler, from Eric Dumazet.
17) Fallback to the default qdisc if qdisc init fails because otherwise
a packet scheduler init failure will make a device inoperative. From
Jesper Dangaard Brouer.
18) Several RISCV bpf jit optimizations, from Luke Nelson.
19) Correct the return type of the ->ndo_start_xmit() method in several
drivers, it's netdev_tx_t but many drivers were using
'int'. From Yunjian Wang.
20) Add an ethtool interface for PHY master/slave config, from Oleksij
Rempel.
21) Add BPF iterators, from Yonghang Song.
22) Add cable test infrastructure, including ethool interfaces, from
Andrew Lunn. Marvell PHY driver is the first to support this
facility.
23) Remove zero-length arrays all over, from Gustavo A. R. Silva.
24) Calculate and maintain an explicit frame size in XDP, from Jesper
Dangaard Brouer.
25) Add CAP_BPF, from Alexei Starovoitov.
26) Support terse dumps in the packet scheduler, from Vlad Buslov.
27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei.
28) Add devm_register_netdev(), from Bartosz Golaszewski.
29) Minimize qdisc resets, from Cong Wang.
30) Get rid of kernel_getsockopt and kernel_setsockopt in order to
eliminate set_fs/get_fs calls. From Christoph Hellwig.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits)
selftests: net: ip_defrag: ignore EPERM
net_failover: fixed rollback in net_failover_open()
Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv"
Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv"
vmxnet3: allow rx flow hash ops only when rss is enabled
hinic: add set_channels ethtool_ops support
selftests/bpf: Add a default $(CXX) value
tools/bpf: Don't use $(COMPILE.c)
bpf, selftests: Use bpf_probe_read_kernel
s390/bpf: Use bcr 0,%0 as tail call nop filler
s390/bpf: Maintain 8-byte stack alignment
selftests/bpf: Fix verifier test
selftests/bpf: Fix sample_cnt shared between two threads
bpf, selftests: Adapt cls_redirect to call csum_level helper
bpf: Add csum_level helper for fixing up csum levels
bpf: Fix up bpf_skb_adjust_room helper's skb csum setting
sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf()
crypto/chtls: IPv6 support for inline TLS
Crypto/chcr: Fixes a coccinile check error
Crypto/chcr: Fixes compilations warnings
...
Since CRW events are (should be) rare, let's put a trace
in that routine too.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200505122745.53208-9-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Use the IRQ to notify userspace that there is a CRW
pending in the region, related to path-availability
changes on the passthrough subchannel.
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200505122745.53208-8-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This region provides a mechanism to pass a Channel Report Word
that affect vfio-ccw devices, and needs to be passed to the guest
for its awareness and/or processing.
The base driver (see crw_collect_info()) provides space for two
CRWs, as a subchannel event may have two CRWs chained together
(one for the ssid, one for the subchannel). As vfio-ccw will
deal with everything at the subchannel level, provide space
for a single CRW to be transferred in one shot.
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200505122745.53208-7-farman@linux.ibm.com>
[CH: added padding to ccw_crw_region]
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
-----BEGIN PGP SIGNATURE-----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=H+/Z
-----END PGP SIGNATURE-----
Merge tag 'for-5.8/drivers-2020-06-01' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
"On top of the core changes, here are the block driver changes for this
merge window:
- NVMe changes:
- NVMe over Fibre Channel protocol updates, which also reach
over to drivers/scsi/lpfc (James Smart)
- namespace revalidation support on the target (Anthony
Iliopoulos)
- gcc zero length array fix (Arnd Bergmann)
- nvmet cleanups (Chaitanya Kulkarni)
- misc cleanups and fixes (me, Keith Busch, Sagi Grimberg)
- use a SRQ per completion vector (Max Gurtovoy)
- fix handling of runtime changes to the queue count (Weiping
Zhang)
- t10 protection information support for nvme-rdma and
nvmet-rdma (Israel Rukshin and Max Gurtovoy)
- target side AEN improvements (Chaitanya Kulkarni)
- various fixes and minor improvements all over, icluding the
nvme part of the lpfc driver"
- Floppy code cleanup series (Willy, Denis)
- Floppy contention fix (Jiri)
- Loop CONFIGURE support (Martijn)
- bcache fixes/improvements (Coly, Joe, Colin)
- q->queuedata cleanups (Christoph)
- Get rid of ioctl_by_bdev (Christoph, Stefan)
- md/raid5 allocation fixes (Coly)
- zero length array fixes (Gustavo)
- swim3 task state fix (Xu)"
* tag 'for-5.8/drivers-2020-06-01' of git://git.kernel.dk/linux-block: (166 commits)
bcache: configure the asynchronous registertion to be experimental
bcache: asynchronous devices registration
bcache: fix refcount underflow in bcache_device_free()
bcache: Convert pr_<level> uses to a more typical style
bcache: remove redundant variables i and n
lpfc: Fix return value in __lpfc_nvme_ls_abort
lpfc: fix axchg pointer reference after free and double frees
lpfc: Fix pointer checks and comments in LS receive refactoring
nvme: set dma alignment to qword
nvmet: cleanups the loop in nvmet_async_events_process
nvmet: fix memory leak when removing namespaces and controllers concurrently
nvmet-rdma: add metadata/T10-PI support
nvmet: add metadata support for block devices
nvmet: add metadata/T10-PI support
nvme: add Metadata Capabilities enumerations
nvmet: rename nvmet_check_data_len to nvmet_check_transfer_len
nvmet: rename nvmet_rw_len to nvmet_rw_data_len
nvmet: add metadata characteristics for a namespace
nvme-rdma: add metadata/T10-PI support
nvme-rdma: introduce nvme_rdma_sgl structure
...
-----BEGIN PGP SIGNATURE-----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=HYf4
-----END PGP SIGNATURE-----
Merge tag 'for-5.8/block-2020-06-01' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
"Core block changes that have been queued up for this release:
- Remove dead blk-throttle and blk-wbt code (Guoqing)
- Include pid in blktrace note traces (Jan)
- Don't spew I/O errors on wouldblock termination (me)
- Zone append addition (Johannes, Keith, Damien)
- IO accounting improvements (Konstantin, Christoph)
- blk-mq hardware map update improvements (Ming)
- Scheduler dispatch improvement (Salman)
- Inline block encryption support (Satya)
- Request map fixes and improvements (Weiping)
- blk-iocost tweaks (Tejun)
- Fix for timeout failing with error injection (Keith)
- Queue re-run fixes (Douglas)
- CPU hotplug improvements (Christoph)
- Queue entry/exit improvements (Christoph)
- Move DMA drain handling to the few drivers that use it (Christoph)
- Partition handling cleanups (Christoph)"
* tag 'for-5.8/block-2020-06-01' of git://git.kernel.dk/linux-block: (127 commits)
block: mark bio_wouldblock_error() bio with BIO_QUIET
blk-wbt: rename __wbt_update_limits to wbt_update_limits
blk-wbt: remove wbt_update_limits
blk-throttle: remove tg_drain_bios
blk-throttle: remove blk_throtl_drain
null_blk: force complete for timeout request
blk-mq: drain I/O when all CPUs in a hctx are offline
blk-mq: add blk_mq_all_tag_iter
blk-mq: open code __blk_mq_alloc_request in blk_mq_alloc_request_hctx
blk-mq: use BLK_MQ_NO_TAG in more places
blk-mq: rename BLK_MQ_TAG_FAIL to BLK_MQ_NO_TAG
blk-mq: move more request initialization to blk_mq_rq_ctx_init
blk-mq: simplify the blk_mq_get_request calling convention
blk-mq: remove the bio argument to ->prepare_request
nvme: force complete cancelled requests
blk-mq: blk-mq: provide forced completion method
block: fix a warning when blkdev.h is included for !CONFIG_BLOCK builds
block: blk-crypto-fallback: remove redundant initialization of variable err
block: reduce part_stat_lock() scope
block: use __this_cpu_add() instead of access by smp_processor_id()
...
The schib region can be used by userspace to get the subchannel-
information block (SCHIB) for the passthrough subchannel.
This can be useful to get information such as channel path
information via the SCHIB.PMCW fields.
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200505122745.53208-5-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This is mostly for the purposes of a later patch, since
we'll need to do the same thing later.
While we are at it, move the resulting function call to ahead
of the unregistering of the IOMMU notifier, so that it's done
in the reverse order of how it was created.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200505122745.53208-4-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Register the chp_event callback to receive channel path related
events for the subchannels managed by vfio-ccw.
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200505122745.53208-3-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Consolidate some of the cleanup code for the regions, so that
as more are added we reduce code duplication.
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200505122745.53208-2-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Remove the explicit prefetch check when using vfio-ccw devices.
This check does not trigger in practice as all Linux channel programs
are intended to use prefetch.
It is expected that all ORBs issued by Linux will request prefetch.
Although non-prefetching ORBs are not rejected, they will prefetch
nonetheless. A warning is issued up to once per 5 seconds when a
forced prefetch occurs.
A non-prefetch ORB does not necessarily result in an error, however
frequent encounters with non-prefetch ORBs indicate that channel
programs are being executed in a way that is inconsistent with what
the guest is requesting. While there is currently no known case of an
error caused by forced prefetch, it is possible in theory that forced
prefetch could result in an error if applied to a channel program that
is dependent on non-prefetch.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20200506212440.31323-2-jrossi@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
CHSC3D (PNSO - perform network subchannel operation) is used for
OC0 (Store-network-bridging-information) as well as for
OC3 (Store-network-address-information). So common fields are renamed
from *brinfo* to *pnso*.
Also *_bridge_host_* is changed into *_addr_change_*, e.g.
qeth_bridge_host_event to qeth_addr_change_event, for the
same reasons.
The keywords in the card traces are changed accordingly.
Remove unused L3 types, as PNSO will only return Layer2 entries.
Make PNSO CHSC implementation more consistent with existing API usage:
Add new function ccw_device_pnso() to drivers/s390/cio/device_ops.c and
the function declaration to arch/s390/include/asm/ccwdev.h, which takes
a struct ccw_device * as parameter instead of schid and calls
chsc_pnso().
PNSO CHSC has no strict relationship to qdio. So move the calling
function from qdio to qeth_l2 and move the necessary structures to a
new file arch/s390/include/asm/chsc.h.
Do response code evaluation only in chsc_error_from_response() and
use return code in all other places. qeth_anset_makerc() was meant to
evaluate the PNSO response code, but never did, because pnso_rc was
already non-zero.
Indentation was corrected in some places.
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
q->first_to_kick is obsolete, and can be replaced by q->first_to_check.
Both cursors start off at 0. Out of the three code paths that update
first_to_check, the qdio_inspect_queue() path is irrelevant as it
doesn't even touch first_to_kick anymore.
This leaves us with the two tasklet-driven code paths. Here any update
to first_to_check is followed by a call to qdio_kick_handler(), which
advances first_to_kick by the same amount.
So the two cursors will differ only for a tiny moment. Drivers have no
way of deterministically observing this difference, and thus it doesn't
matter which of the cursors we use for reporting an error to q->handler.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Document the actual semantics, correcting an old copy & paste mistake.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The IBM partition parser requires device type specific information only
available to the DASD driver to correctly register partitions. The
current approach of using ioctl_by_bdev with a fake user space pointer
is discouraged.
Fix this by replacing IOCTL calls with direct in-kernel function calls.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Prepare for in-kernel callers of this functionality.
Signed-off-by: Christoph Hellwig <hch@lst.de>
[sth@de.ibm.com: remove leftover kfree]
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Provide a new interface function to be used by the ap drivers:
struct ap_queue *ap_get_qdev(ap_qid_t qid);
Returns ptr to the struct ap_queue device or NULL if there
was no ap_queue device with this qid found. When something is
found, the reference count of the embedded device is increased.
So the caller has to decrease the reference count after use
with a call to put_device(&aq->ap_dev.device).
With this patch also the ap_card_list is removed from the
ap core code and a new hashtable is introduced which stores
hnodes of all the ap queues known to the ap bus.
The hashtable approach and a first implementation of this
interface comes from a previous patch from
Anthony Krowiak and an idea from Halil Pasic.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Suggested-by: Tony Krowiak <akrowiak@linux.ibm.com>
Suggested-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
SBALs in PRIMED or ERROR state represent new work on the Input Queue.
But while inbound_primed() does all sorts of ACK management for new
PRIMED work, the same handling is currently missing for ERROR work.
In particular the path for ERROR work doesn't clear up _old_ ACKs.
Treat ERROR work the same as PRIMED work, but consider that the QEBSM
auto-ACK feature doesn't apply here. So we need to set the ACK manually,
as if it was a non-QEBSM device.
Note that this doesn't aspire to actually improve performance, the main
goal is to just unify the code paths and have consistent behaviour.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
inbound_primed() currently has two code paths - one for QEBSM that knows
how to deal with multiple ACKs, and a non-QEBSM path that strictly
assumes a single ACK on the queue.
In preparation for a subsequent patch, slightly adjust the non-QEBSM
path so that it can manage a queue with multiple ACKs.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Refilling the Input Queue requires additional checks, as the refilled
SBALs can overlap with the ACKs that qdio maintains on the queue.
This code path is way too complex, and does a whole bunch of wrap-around
checks that the modulo arithmetic in sub_buf() takes care of by itself.
So shrink down all that code into a few lines of equivalent
functionality.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Commit 394216275c ("s390: remove broken hibernate / power management support")
removed support for ARCH_HIBERNATION_POSSIBLE on s390.
So drop the unused pm ops from the iucv drivers.
CC: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 5e1fb45ec8 ("s390/ccwgroup: remove pm support") removed power
management support from the ccwgroup bus driver. So remove the
associated callbacks from all ccwgroup drivers.
CC: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the bpf verifier trace check into the new switch statement in
HEAD.
Resolve the overlapping changes in hinic, where bug fixes overlap
the addition of VF support.
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix to return negative error code -ENOMEM from the smcd_alloc_dev()
error handling case instead of 0, as done elsewhere in this function.
Fixes: 684b89bc39 ("s390/ism: add device driver for internal shared memory")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
At the moment we allocate and register the Scsi_Host object corresponding
to a zfcp adapter (FCP device) very early in the life cycle of the adapter
- even before we fully discover and initialize the underlying
firmware/hardware. This had the advantage that we could already use the
Scsi_Host object, and fill in all its information during said discover and
initialize.
Due to commit 737eb78e82 ("block: Delay default elevator initialization")
(first released in v5.4), we noticed a regression that would prevent us
from using any storage volume if zfcp is configured with support for DIF or
DIX (zfcp.dif=1 || zfcp.dix=1). Doing so would result in an illegal memory
access as soon as the first request is sent with such an configuration. As
example for a crash resulting from this:
scsi host0: scsi_eh_0: sleeping
scsi host0: zfcp
qdio: 0.0.1900 ZFCP on SC 4bd using AI:1 QEBSM:0 PRI:1 TDD:1 SIGA: W AP
scsi 0:0:0:0: scsi scan: INQUIRY pass 1 length 36
Unable to handle kernel pointer dereference in virtual kernel address space
Failing address: 0000000000000000 TEID: 0000000000000483
Fault in home space mode while using kernel ASCE.
AS:0000000035c7c007 R3:00000001effcc007 S:00000001effd1000 P:000000000000003d
Oops: 0004 ilc:3 [#1] PREEMPT SMP DEBUG_PAGEALLOC
Modules linked in: ...
CPU: 1 PID: 783 Comm: kworker/u760:5 Kdump: loaded Not tainted 5.6.0-rc2-bb-next+ #1
Hardware name: ...
Workqueue: scsi_wq_0 fc_scsi_scan_rport [scsi_transport_fc]
Krnl PSW : 0704e00180000000 000003ff801fcdae (scsi_queue_rq+0x436/0x740 [scsi_mod])
R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3
Krnl GPRS: 0fffffffffffffff 0000000000000000 0000000187150120 0000000000000000
000003ff80223d20 000000000000018e 000000018adc6400 0000000187711000
000003e0062337e8 00000001ae719000 0000000187711000 0000000187150000
00000001ab808100 0000000187150120 000003ff801fcd74 000003e0062336a0
Krnl Code: 000003ff801fcd9e: e310a35c0012 lt %r1,860(%r10)
000003ff801fcda4: a7840010 brc 8,000003ff801fcdc4
#000003ff801fcda8: e310b2900004 lg %r1,656(%r11)
>000003ff801fcdae: d71710001000 xc 0(24,%r1),0(%r1)
000003ff801fcdb4: e310b2900004 lg %r1,656(%r11)
000003ff801fcdba: 41201018 la %r2,24(%r1)
000003ff801fcdbe: e32010000024 stg %r2,0(%r1)
000003ff801fcdc4: b904002b lgr %r2,%r11
Call Trace:
[<000003ff801fcdae>] scsi_queue_rq+0x436/0x740 [scsi_mod]
([<000003ff801fcd74>] scsi_queue_rq+0x3fc/0x740 [scsi_mod])
[<00000000349c9970>] blk_mq_dispatch_rq_list+0x390/0x680
[<00000000349d1596>] blk_mq_sched_dispatch_requests+0x196/0x1a8
[<00000000349c7a04>] __blk_mq_run_hw_queue+0x144/0x160
[<00000000349c7ab6>] __blk_mq_delay_run_hw_queue+0x96/0x228
[<00000000349c7d5a>] blk_mq_run_hw_queue+0xd2/0xe0
[<00000000349d194a>] blk_mq_sched_insert_request+0x192/0x1d8
[<00000000349c17b8>] blk_execute_rq_nowait+0x80/0x90
[<00000000349c1856>] blk_execute_rq+0x6e/0xb0
[<000003ff801f8ac2>] __scsi_execute+0xe2/0x1f0 [scsi_mod]
[<000003ff801fef98>] scsi_probe_and_add_lun+0x358/0x840 [scsi_mod]
[<000003ff8020001c>] __scsi_scan_target+0xc4/0x228 [scsi_mod]
[<000003ff80200254>] scsi_scan_target+0xd4/0x100 [scsi_mod]
[<000003ff802d8b96>] fc_scsi_scan_rport+0x96/0xc0 [scsi_transport_fc]
[<0000000034245ce8>] process_one_work+0x458/0x7d0
[<00000000342462a2>] worker_thread+0x242/0x448
[<0000000034250994>] kthread+0x15c/0x170
[<0000000034e1979c>] ret_from_fork+0x30/0x38
INFO: lockdep is turned off.
Last Breaking-Event-Address:
[<000003ff801fbc36>] scsi_add_cmd_to_list+0x9e/0xa8 [scsi_mod]
Kernel panic - not syncing: Fatal exception: panic_on_oops
While this issue is exposed by the commit named above, this is only by
accident. The real issue exists for longer already - basically since it's
possible to use blk-mq via scsi-mq, and blk-mq pre-allocates all requests
for a tag-set during initialization of the same. For a given Scsi_Host
object this is done when adding the object to the midlayer
(`scsi_add_host()` and such). In `scsi_mq_setup_tags()` the midlayer
calculates how much memory is required for a single scsi_cmnd, and its
additional data, which also might include space for additional protection
data - depending on whether the Scsi_Host has any form of protection
capabilities (`scsi_host_get_prot()`).
The problem is now thus, because zfcp does this step before we actually
know whether the firmware/hardware has these capabilities, we don't set any
protection capabilities in the Scsi_Host object. And so, no space is
allocated for additional protection data for requests in the Scsi_Host
tag-set.
Once we go through discover and initialize the FCP device firmware/hardware
fully (this is done via the firmware commands "Exchange Config Data" and
"Exchange Port Data") we find out whether it actually supports DIF and DIX,
and we set the corresponding capabilities in the Scsi_Host object (in
`zfcp_scsi_set_prot()`). Now the Scsi_Host potentially has protection
capabilities, but the already allocated requests in the tag-set don't have
any space allocated for that.
When we then trigger target scanning or add scsi_devices manually, the
midlayer will use requests from that tag-set, and before sending most
requests, it will also call `scsi_mq_prep_fn()`. To prepare the scsi_cmnd
this function will check again whether the used Scsi_Host has any
protection capabilities - and now it potentially has - and if so, it will
try to initialize the assumed to be preallocated structures and thus it
causes the crash, like shown above.
Before delaying the default elevator initialization with the commit named
above, we always would also allocate an elevator for any scsi_device before
ever sending any requests - in contrast to now, where we do it after
device-probing. That elevator in turn would have its own tag-set, and that
is initialized after we went through discovery and initialization of the
underlying firmware/hardware. So requests from that tag-set can be
allocated properly, and if used - unless the user changes/disabled the
default elevator - this would hide the underlying issue.
To fix this for any configuration - with or without an elevator - we move
the allocation and registration of the Scsi_Host object for a given FCP
device to after the first complete discovery and initialization of the
underlying firmware/hardware. By doing that we can make all basic
properties of the Scsi_Host known to the midlayer by the time we call
`scsi_add_host()`, including whether we have any protection capabilities.
To do that we have to delay all the accesses that we would have done in the
past during discovery and initialization, and do them instead once we are
finished with it. The previous patches ramp up to this by fencing and
factoring out all these accesses, and make it possible to re-do them later
on. In addition we make also use of the diagnostic buffers we recently
added with
commit 92953c6e0a ("scsi: zfcp: signal incomplete or error for sync exchange config/port data")
commit 7e418833e6 ("scsi: zfcp: diagnostics buffer caching and use for exchange port data")
commit 088210233e ("scsi: zfcp: add diagnostics buffer for exchange config data")
(first released in v5.5), because these already cache all the information
we need for that "re-do operation" - the information cached are always
updated during xconf or xport data, so it won't be stale.
In addition to the move and re-do, this patch also updates the
function-documentation of `zfcp_scsi_adapter_register()` and changes how it
reports if a Scsi_Host object already exists. In that case future
recovery-operations can skip this step completely and behave much like they
would do in the past - zfcp does not release a once allocated Scsi_Host
object unless the corresponding FCP device is deconstructed completely.
Link: https://lore.kernel.org/r/030dd6da318bbb529f0b5268ec65cebcd20fc0a3.1588956679.git.bblock@linux.ibm.com
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When setting an adapter online for the first time, we also create a couple
of entries for it in the sysfs device tree. This is also true even if the
adapter has not yet ever gone successfully through exchange config and
exchange port data.
When moving the scsi host object allocation and registration to after the
first exchange config and exchange port data, this make the `port_rescan`
attribute susceptible to invalid pointer-dereferences of the shost field
before the adapter is fully initialized.
When written to, it schedules a `scan_work` item that will in turn make use
of the associated fibre channel host object to check the topology used for
this FCP device.
Because scanning for remote ports can't be done successfully without
completing exchange config and exchange port data first, we can simply
fence `port_rescan`, and so prevent the illegal access.
As with cases where we can't get a reference to the adapter, we also return
-ENODEV here. Applications need to handle that errno today already.
After a successful allocation of the scsi host object nothing changes in
the work flow.
Link: https://lore.kernel.org/r/ef65366d309993ca91b6917727590ca7ca166c8f.1588956679.git.bblock@linux.ibm.com
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Common status flags that all main objects - adapter, port, and unit -
support are propagated to sub-objects when set or cleared. For instance,
when setting the status ZFCP_STATUS_COMMON_ERP_INUSE for an adapter object,
we will propagate this to all its child ports and units - same for when
clearing a common status flag.
Units of an adapter object are enumerated via __shost_for_each_device()
over the scsi host object of the corresponding adapter.
Once we move the scsi host object allocation and registration to after the
first exchange config and exchange port data, this won't be possible for
cases where we set or clear common statuses during the very first adapter
recovery.
But since we won't have any port or unit objects yet at that point of time,
we can just fence the status propagation for cases where the scsi host
object is not yet set in the adapter object. It won't change any effective
status propagations, but will prevent us from dereferencing invalid
pointers.
For any later point in the work flow the scsi host object will be set and
thus nothing is changed then.
Link: https://lore.kernel.org/r/f51fe5f236a1e3d1ce53379c308777561bfe35e1.1588956679.git.bblock@linux.ibm.com
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When doing the very first adapter recovery - initialization - for a FCP
device in a point-to-point topology we also allocate the port object
corresponding to the attached remote port, and trigger a port recovery for
it that will run after the adapter recovery finished.
Right now this happens right after we finished with the exchange config
data command, and uses the fibre channel host object corresponding to the
FCP device to determine whether a point-to-point topology is used.
When moving the scsi host object allocation and registration - and thus
also the fibre channel host object allocation - to after the first exchange
config and exchange port data, this use of the fc_host object is not
possible anymore at that point in the work flow.
But the allocation and recovery trigger doesn't have notable side-effects
on the following exchange port data processing, so we can move those to
after xport data, and thus also to after the scsi host object allocation,
once we move it. Then the fc_host object can be used again, like it is now.
For any further adapter recoveries this doesn't change anything, because at
that point the port object already exists and recovery is triggered
elsewhere for existing port objects.
Link: https://lore.kernel.org/r/73e5d4ac21e2b37bf0c3ca8e530bc5a5c6e74f8f.1588956679.git.bblock@linux.ibm.com
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When receiving a notification that a FCP device lost its local link we
usually update the fibre channel host object which represents that FCP
device to reflect that.
This notification/information can also surface when the FCP device is
running through adapter recovery (exchange config and exchange port data
return incomplete).
When moving the scsi host object allocation and registration - and thus
also the fibre channel host object allocation - to after the first exchange
config and exchange port data, and this happens during the very first
adapter recovery, these updates can not be done until after the scsi host
object is allocated.
Reorder the fc_host updates in zfcp_fsf_fc_host_link_down() so that they
only happen after a check of whether the scsi host object is already
allocated or not.
During the first adapter recovery this will cause the skip of these updates
if a link-down condition is detected, but we can repeat them after we
allocated the scsi host object, if necessary.
For any further link-down handling the only changes in the work flow are
the slightly reordered assignments in zfcp_fsf_fc_host_link_down().
Link: https://lore.kernel.org/r/f841f2cda61dcd7b8549910c44e1831927459edf.1588956679.git.bblock@linux.ibm.com
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When executing exchange port data for a FCP device for the first time, or
after an adapter recovery, we update several properties of the fibre
channel host object which represents that FCP device.
When moving the scsi host object allocation and registration - and thus
also the fibre channel host object allocation - to after the first exchange
config and exchange port data, this is not possible for the former case.
Move all these update into separate, and fenced function that first checks
whether the scsi host object already exists or not, before making the
updates.
During the first ever exchange port data in the adapter life cycle this
will make the exchange port data handler skip over this update step, but we
can repeat it later, after we allocated the scsi host object.
For any further recovery of that adapter the work flow is only changed
slightly because then the scsi host object already exists and we don't free
it until we release the adapter completely at the end of its life cycle.
Link: https://lore.kernel.org/r/ae454c2dc6da0b02907c489af91d0b211d331825.1588956679.git.bblock@linux.ibm.com
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When executing exchange config data for a FCP device for the first time, or
after an adapter recovery, we update several properties of the scsi host or
fibre channel host object that represent that FCP device.
When moving the scsi host object allocation and registration - and thus
also the fibre channel host object allocation - to after the first exchange
config and exchange port data, this is not possible for the former case.
Move all these update into separate, and fenced function that first checks
whether the scsi host object already exists or not, before making the
updates.
During the first ever exchange config data in the adapter life cycle this
will make the exchange config data handler skip over this update step, but
we can repeat it later, after we allocated the scsi host object.
For any further recovery of that adapter the work flow is only changed
slightly because then the scsi host object already exists and we don't free
it until we release the adapter completely at the end of its life cycle.
Link: https://lore.kernel.org/r/5fc3f4d38d4334f7aa595497c6f7865fb1102e0f.1588956679.git.bblock@linux.ibm.com
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When establishing and activating the QDIO queue pair for a FCP device for
the first time, or after an adapter recovery, we publish some of its
characteristics to the scsi host object representing that FCP device.
When moving the scsi host object allocation and registration to after the
first exchange config and exchange port data, this is not possible for the
former case - QDIO open for the first time - because that happens before
exchange config and exchange port data.
Move the scsi host object update into a fenced function that checks whether
the object already exists or not. This way we can repeat that step later,
once we are past the allocation.
Once the first recovery succeeds we don't release the scsi host object
anymore, so further recoveries do work as before.
Link: https://lore.kernel.org/r/a214ebf508f71e3690113e3e90edab1cea0e24e3.1588956679.git.bblock@linux.ibm.com
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Remove a stale doc link. While at it also reword the help text to get
rid of an outdated marketing term.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When starting the reset worker via sysfs is unsuccessful, return an
error to the user.
Modernize the sysfs input parsing while at it.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When qeth_flush_buffers() gets called for a group of TX buffers
(currently up to 2 for OSA-style devices), the code iterates over each
buffer for some final processing.
During this processing, it sets the TX IRQ marker on the leading buffer
rather than the last one. This can result in delayed TX completion of
the trailing buffers. So pull the IRQ marker code out of the loop, and
apply it to the final buffer.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The TX path usually maps the full content of a page into a buffer
element. But there's specific skb layouts (ie. linearized TSO skbs)
where the HW header (1) requires a separate buffer element, and (2) is
page-contiguous with the packet data that's mapped into the next buffer
element.
Flag such buffer elements accordingly, so that HW can optimize its data
access for them.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge the __qeth_fill_buffer() helper into its only caller. This way all
mapping-related context is in one place, and we can make some more use
of it in a subsequent patch.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Current OSA models don't support TSO for traffic to local next-hops, and
some old models didn't offer TX CSO for such packets either.
So as part of .ndo_features_check, check if a packet's next-hop resides
on the same OSA Adapter. Opt out from affected HW offloads accordingly.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For debugging purposes, provide read access to the local_addr caches
via debug/qeth/<dev_name>/local_addrs.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In configurations where specific HW offloads are in use, OSA adapters
will raise notifications to their virtual devices about the IP addresses
that currently reside on the same adapter.
Cache these addresses in two RCU-enabled hash tables, and flush the
tables once the relevant HW offload(s) get disabled.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When enabling TX CSO, make a note of whether the device has support for
LP2LP offloading. This will become relevant in subsequent patches.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With the introduction of TX coalescing, .ndo_start_xmit now potentially
starts the TX completion timer. So only kill the timer _after_ TX has
been disabled.
Fixes: ee1e52d1e4 ("s390/qeth: add TX IRQ coalescing support for IQD devices")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
buf_in_between() gets passed q->u.in.ack_start as 'bufnr' parameter.
The ack_start always ranges between 0 and QDIO_MAX_BUFFERS_PER_Q - 1,
so the subsequent check will always return true. Remove it.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Except for some initial thinint-only steps, the processing is identical
to the non-thinint case. So re-use the existing helper.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Knowing how many queues we initially allocated allows us to
1) sanity-check a subsequent qdio_establish() request, and
2) walk the queue arrays without further checks. Apply this while
cleanly splitting qdio_free_queues() into two separate helpers.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
When qdio_allocate_qs() fails, have it deal with its previous
allocations.
This way qdio_allocate() doesn't need to clean up afterwards.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Instead of having a catch-all qdio_release_memory() helper, free the
individual allocations from the respective error path.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Wrap the init/exit steps for thinint into a single helper that follows
the established naming scheme.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
qdio_establish() calls qdio_setup_thinint() via qdio_setup_irq().
If the subsequent qdio_establish_thinint() fails, we miss to put the
DSCI again. Thus the DSCI isn't available for re-use. Given enough of
such errors, we could end up with having only the shared DSCI available.
Merge qdio_setup_thinint() into qdio_establish_thinint(), and deal with
such an error internally.
Fixes: 779e6e1c72 ("[S390] qdio: new qdio driver.")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
qdio_establish() calls qdio_establish_thinint(), but later has an error
exit path that doesn't roll this call back. Fix it.
Fixes: 779e6e1c72 ("[S390] qdio: new qdio driver.")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
For rolling back after an error, qdio_establish() calls qdio_shutdown().
If the error occurs early enough, then the qdio_irq's state still is
QDIO_IRQ_STATE_INACTIVE and qdio_shutdown() does nothing.
But at _any_ point where qdio_establish() bails out in this way,
qdio_setup_irq() will have already replaced the IRQ handler. This then
won't be restored after an early error, and the device can end up being
returned to the device driver with qdio's IRQ handler still installed.
Slightly reorder qdio_setup_irq() so we can be 100% sure that the IRQ
handler was replaced. Then fix the bug in qdio_establish() by calling a
helper that rolls back only the IRQ handler modification.
Also use the new helper in qdio_shutdown() to keep things in sync, and
slightly clean up the locking while doing so.
This makes minor semantical changes, but holding setup_mutex gives us
sufficient leeway to eg. pull qdio_shutdown_thinint() outside of the
ccwdev lock's scope.
Fixes: 779e6e1c72 ("[S390] qdio: new qdio driver.")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Use the blk_drop_partitions function instead of messing around with
ioctls that get kernel pointers. For this blk_drop_partitions needs
to be exported, which it normally shouldn't - make an exception for
s390 only.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
CONFIG_IOSCHED_DEADLINE was removed with
commit f382fb0bce ("block: remove legacy IO schedulers")
and setting of the scheduler was removed with
commit a5fd8ddce2 ("s390/dasd: remove setting of scheduler from driver").
So get rid of the select.
Reported-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is a batch of changes that didn't make it in the initial pull
request because the lpfc series had to be rebased to redo an incorrect
split. It's basically driver updates to lpfc, target, bnx2fc and ufs
with the rest being minor updates except the sr_block_release one
which fixes a use after free introduced by the removal of the global
mutex in the first patch set.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXpC3hSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishRTaAP9umhxu
8rRnJ5hsxXRmxOUzO5BGe403ffcBeAiEKQ2n3gEAjeoxZAaqKuDDDRfXyRnBpt9Z
QuBrgpm1gdXrJT5DDj4=
=+4Qg
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"This is a batch of changes that didn't make it in the initial pull
request because the lpfc series had to be rebased to redo an incorrect
split.
It's basically driver updates to lpfc, target, bnx2fc and ufs with the
rest being minor updates except the sr_block_release one which fixes a
use after free introduced by the removal of the global mutex in the
first patch set"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (35 commits)
scsi: core: Add DID_ALLOC_FAILURE and DID_MEDIUM_ERROR to hostbyte_table
scsi: ufs: Use ufshcd_config_pwr_mode() when scaling gear
scsi: bnx2fc: fix boolreturn.cocci warnings
scsi: zfcp: use fallthrough;
scsi: aacraid: do not overwrite retval in aac_reset_adapter()
scsi: sr: Fix sr_block_release()
scsi: aic7xxx: Remove more FreeBSD-specific code
scsi: mpt3sas: Fix kernel panic observed on soft HBA unplug
scsi: ufs: set device as active power mode after resetting device
scsi: iscsi: Report unbind session event when the target has been removed
scsi: lpfc: Change default SCSI LUN QD to 64
scsi: libfc: rport state move to PLOGI if all PRLI retry exhausted
scsi: libfc: If PRLI rejected, move rport to PLOGI state
scsi: bnx2fc: Update the driver version to 2.12.13
scsi: bnx2fc: Fix SCSI command completion after cleanup is posted
scsi: bnx2fc: Process the RQE with CQE in interrupt context
scsi: target: use the stack for XCOPY passthrough cmds
scsi: target: increase XCOPY I/O size
scsi: target: avoid per-loop XCOPY buffer allocations
scsi: target: drop xcopy DISK BLOCK LENGTH debug
...
- The rest of fallthrough; annotations conversion.
- Couple of fixes for ADD uevents in the common I/O layer.
- Minor refactoring of the queued direct I/O code.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAl6QS08ACgkQjYWKoQLX
FBhW3Af8Cor9Dvy+EObX7vTwAgrVwfvBgkJGQzSpK/2/PBhV8SsZkTCTxTZmM2X1
TV6UZ9Afde6zWcF8ywn81iblZlt4SNrN3jLxgdETgR1oBQzOUi1lZDZ/71YdZREe
09u35KS5D6NLWHBT9RXU+2qu6PbpiO2rZJycdLxvOmmZJ1kx5WtPPmisG17hQq+e
t2AhYLqQg6YkCtvs3Q8xrotjfqvx0XDhE8R67nbb9+HpAI4W9S4q5n7Zno03V622
WTTrsbEF++a8Q9SCyiP79G7/LgA/m6U72YWbjhcOGgN8g/24E6+/BXZj9b3eLOgF
4DNmJ4+kt+meaz2CcxCnVxTXwVO2ow==
=yqbJ
-----END PGP SIGNATURE-----
Merge tag 's390-5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Vasily Gorbik:
"Second round of s390 fixes and features for 5.7:
- The rest of fallthrough; annotations conversion
- Couple of fixes for ADD uevents in the common I/O layer
- Minor refactoring of the queued direct I/O code"
* tag 's390-5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/cio: generate delayed uevent for vfio-ccw subchannels
s390/cio: avoid duplicated 'ADD' uevents
s390/qdio: clear DSCI early for polling drivers
s390/qdio: inline shared_ind()
s390/qdio: remove cdev from init_data
s390/qdio: allow for non-contiguous SBAL array in init_data
zfcp: inline zfcp_qdio_setup_init_data()
s390/qdio: cleanly split alloc and establish
s390/mm: use fallthrough;
- Add support for region alignment configuration and enforcement to
fix compatibility across architectures and PowerPC page size
configurations.
- Introduce 'zero_page_range' as a dax operation. This facilitates
filesystem-dax operation without a block-device.
- Introduce phys_to_target_node() to facilitate drivers that want to
know resulting numa node if a given reserved address range was
onlined.
- Advertise a persistence-domain for of_pmem and papr_scm. The
persistence domain indicates where cpu-store cycles need to reach in
the platform-memory subsystem before the platform will consider them
power-fail protected.
- Promote numa_map_to_online_node() to a cross-kernel generic facility.
- Save x86 numa information to allow for node-id lookups for reserved
memory ranges, deploy that capability for the e820-pmem driver.
- Pick up some miscellaneous minor fixes, that missed v5.6-final,
including a some smatch reports in the ioctl path and some unit test
compilation fixups.
- Fixup some flexible-array declarations.
-----BEGIN PGP SIGNATURE-----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=sY4N
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm and dax updates from Dan Williams:
"There were multiple touches outside of drivers/nvdimm/ this round to
add cross arch compatibility to the devm_memremap_pages() interface,
enhance numa information for persistent memory ranges, and add a
zero_page_range() dax operation.
This cycle I switched from the patchwork api to Konstantin's b4 script
for collecting tags (from x86, PowerPC, filesystem, and device-mapper
folks), and everything looks to have gone ok there. This has all
appeared in -next with no reported issues.
Summary:
- Add support for region alignment configuration and enforcement to
fix compatibility across architectures and PowerPC page size
configurations.
- Introduce 'zero_page_range' as a dax operation. This facilitates
filesystem-dax operation without a block-device.
- Introduce phys_to_target_node() to facilitate drivers that want to
know resulting numa node if a given reserved address range was
onlined.
- Advertise a persistence-domain for of_pmem and papr_scm. The
persistence domain indicates where cpu-store cycles need to reach
in the platform-memory subsystem before the platform will consider
them power-fail protected.
- Promote numa_map_to_online_node() to a cross-kernel generic
facility.
- Save x86 numa information to allow for node-id lookups for reserved
memory ranges, deploy that capability for the e820-pmem driver.
- Pick up some miscellaneous minor fixes, that missed v5.6-final,
including a some smatch reports in the ioctl path and some unit
test compilation fixups.
- Fixup some flexible-array declarations"
* tag 'libnvdimm-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (29 commits)
dax: Move mandatory ->zero_page_range() check in alloc_dax()
dax,iomap: Add helper dax_iomap_zero() to zero a range
dax: Use new dax zero page method for zeroing a page
dm,dax: Add dax zero_page_range operation
s390,dcssblk,dax: Add dax zero_page_range operation to dcssblk driver
dax, pmem: Add a dax operation zero_page_range
pmem: Add functions for reading/writing page to/from pmem
libnvdimm: Update persistence domain value for of_pmem and papr_scm device
tools/test/nvdimm: Fix out of tree build
libnvdimm/region: Fix build error
libnvdimm/region: Replace zero-length array with flexible-array member
libnvdimm/label: Replace zero-length array with flexible-array member
ACPI: NFIT: Replace zero-length array with flexible-array member
libnvdimm/region: Introduce an 'align' attribute
libnvdimm/region: Introduce NDD_LABELING
libnvdimm/namespace: Enforce memremap_compat_align()
libnvdimm/pfn: Prevent raw mode fallback if pfn-infoblock valid
libnvdimm: Out of bounds read in __nd_ioctl()
acpi/nfit: improve bounds checking for 'func'
mm/memremap_pages: Introduce memremap_compat_align()
...
The common I/O layer delays the ADD uevent for subchannels and
delegates generating this uevent to the individual subchannel
drivers. The vfio-ccw I/O subchannel driver, however, did not
do that, and will not generate an ADD uevent for subchannels
that had not been bound to a different driver (or none at all,
which also triggers the uevent).
Generate the ADD uevent at the end of the probe function if
uevents were still suppressed for the device.
Message-Id: <20200327124503.9794-3-cohuck@redhat.com>
Fixes: 63f1934d56 ("vfio: ccw: basic implementation for vfio_ccw driver")
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The common I/O layer delays the ADD uevent for subchannels and
delegates generating this uevent to the individual subchannel
drivers. The io_subchannel driver will do so when the associated
ccw_device has been registered -- but unconditionally, so more
ADD uevents will be generated if a subchannel has been unbound
from the io_subchannel driver and later rebound.
To fix this, only generate the ADD event if uevents were still
suppressed for the device.
Fixes: fa1a8c23eb ("s390: cio: Delay uevents for subchannels")
Message-Id: <20200327124503.9794-2-cohuck@redhat.com>
Reported-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Polling drivers in a configuration with 1 Input Queue currently keep
their DSCI armed all the way through the poll cycle, until
qdio_start_irq() clears it.
_Any_ intermittent QDIO interrupt delivered to tiqdio_thinint_handler()
will thus cause
1) the 'adapter_int' statistic to be incremented,
2) a call to tiqdio_call_inq_handlers() for this device, and then
3) the 'int_discarded' statistics to be incremented.
This causes overhead & complexity in the IRQ path, along with ambiguity
in the statistics.
On the other hand the device should be in IRQ avoidance mode during a
poll cycle, so there won't be a lot of DSCI ping-pong that this
micro-optimization could prevent.
So align the DSCI handling with what we already do for devices with
multiple Input Queues: clear it right away while processing the IRQ.
For the non-polling path this means that we no longer need to handle
the 1-queue case separately.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
This is just prep work for a subsequent patch, no functional change.
For the non-polling path we can pull the code chunk in front of the
for-loop, since it only evaluates to true for a 1-queue configuration.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Upper-layer drivers allocate their SBALs by calling qdio_alloc_buffers()
for each individual queue. But when later passing the SBAL addresses to
qdio_establish(), they need to be in a single array of pointers.
So if the driver uses multiple Input or Output queues, it needs to
allocate a temporary array just to present all its SBAL pointers in this
layout.
This patch slightly changes the format of the QDIO initialization data,
so that drivers can pass a per-queue array where each element points to
a queue's SBAL array.
zfcp doesn't use multiple queues, so the impact there is trivial.
For qeth this brings a nice reduction in complexity, and removes
a page-sized allocation.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
In preparation for a subsequent patch, move the setup of init_data into
the only caller.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
All that qdio_allocate() actually uses from the init_data is the cdev,
and the number of Input and Output Queues. Have the driver pass those as
parameters, and defer the init_data processing into qdio_establish().
This includes writing per-device(!) trace entries, and most of the
sanity checks.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
- Update maintainers. Niklas Schnelle takes over zpci and Vineeth Vijayan
common io code.
- Extend cpuinfo to include topology information.
- Add new extended counters for IBM z15 and sampling buffer allocation
rework in perf code.
- Add control over zeroing out memory during system restart.
- CCA protected key block version 2 support and other fixes/improvements
in crypto code.
- Convert to new fallthrough; annotations.
- Replace zero-length arrays with flexible-arrays.
- QDIO debugfs and other small improvements.
- Drop 2-level paging support optimization for compat tasks. Varios
mm cleanups.
- Remove broken and unused hibernate / power management support.
- Remove fake numa support which does not bring any benefits.
- Exclude offline CPUs from CPU topology masks to be more consistent
with other architectures.
- Prevent last branching instruction address leaking to userspace.
- Other small various fixes and improvements all over the code.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAl6Ig2YACgkQjYWKoQLX
FBj2gggAibnHOl9d0ngX1mVT4nz51R3V8z5sEQjNMr2uHBmaTqs7pi/00gaFMxoC
NngVEXvL443jSogQivthGgXPpRCV9xdKE3sp38j7fF4LgHoeuDtGd1oaX4W9Rqk0
7Yii35EaO2e2WHdOKaAbu+ZvDRunFjERyntc51MYaIUivFosogSo07vC73vFIArF
VGStS09fJ4Ny76ott896T7Ulx1Iek/MkF1vponEMLGNUIcLIQbbxZxOwgz0pHuEF
SlyyJBnhOIaAJGOYlKREQDt1cew+hsxluPU+a01bwdsmdZv9LH1BGwLayDqTH58i
QWvtEpzJFmDvo9jGM1v81ebaGnyCKg==
=hiGF
-----END PGP SIGNATURE-----
Merge tag 's390-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Update maintainers. Niklas Schnelle takes over zpci and Vineeth
Vijayan common io code.
- Extend cpuinfo to include topology information.
- Add new extended counters for IBM z15 and sampling buffer allocation
rework in perf code.
- Add control over zeroing out memory during system restart.
- CCA protected key block version 2 support and other
fixes/improvements in crypto code.
- Convert to new fallthrough; annotations.
- Replace zero-length arrays with flexible-arrays.
- QDIO debugfs and other small improvements.
- Drop 2-level paging support optimization for compat tasks. Varios mm
cleanups.
- Remove broken and unused hibernate / power management support.
- Remove fake numa support which does not bring any benefits.
- Exclude offline CPUs from CPU topology masks to be more consistent
with other architectures.
- Prevent last branching instruction address leaking to userspace.
- Other small various fixes and improvements all over the code.
* tag 's390-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (57 commits)
s390/mm: cleanup init_new_context() callback
s390/mm: cleanup virtual memory constants usage
s390/mm: remove page table downgrade support
s390/qdio: set qdio_irq->cdev at allocation time
s390/qdio: remove unused function declarations
s390/ccwgroup: remove pm support
s390/ap: remove power management code from ap bus and drivers
s390/zcrypt: use kvmalloc instead of kmalloc for 256k alloc
s390/mm: cleanup arch_get_unmapped_area() and friends
s390/ism: remove pm support
s390/cio: use fallthrough;
s390/vfio: use fallthrough;
s390/zcrypt: use fallthrough;
s390: use fallthrough;
s390/cpum_sf: Fix wrong page count in error message
s390/diag: fix display of diagnose call statistics
s390/ap: Remove ap device suspend and resume callbacks
s390/pci: Improve handling of unset UID
s390/pci: Fix zpci_alloc_domain() over allocation
s390/qdio: pass ISC as parameter to chsc_sadc()
...
zero_page_range() dax operation is mandatory for dax devices. Right now
that check happens in dax_zero_page_range() function. Dan thinks that's
too late and its better to do the check earlier in alloc_dax().
I also modified alloc_dax() to return pointer with error code in it in
case of failure. Right now it returns NULL and caller assumes failure
happened due to -ENOMEM. But with this ->zero_page_range() check, I
need to return -EINVAL instead.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Link: https://lore.kernel.org/r/20200401161125.GB9398@redhat.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
update changing all our txt files to rst ones. Excluding that, we
have the usual driver updates (qla2xxx, ufs, lpfc, zfcp, ibmvfc,
pm80xx, aacraid), a treewide update for scnprintf and some other minor
updates. The major core update is Hannes moving functions out of the
aacraid driver and into the core.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXoYKiyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishSasAP4iGwSB
Y8tFaZgWadu76+wj5MdqTBoXdhnIuFF0rZG3pQEAiIKdsfQlbSFdm75+gUtx5hG/
GOilX/pJczTRJDCGNis=
=g7Sk
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This series has a huge amount of churn because it pulls in Mauro's doc
update changing all our txt files to rst ones.
Excluding that, we have the usual driver updates (qla2xxx, ufs, lpfc,
zfcp, ibmvfc, pm80xx, aacraid), a treewide update for scnprintf and
some other minor updates.
The major core change is Hannes moving functions out of the aacraid
driver and into the core"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (223 commits)
scsi: aic7xxx: aic97xx: Remove FreeBSD-specific code
scsi: ufs: Do not rely on prefetched data
scsi: dc395x: remove dc395x_bios_param
scsi: libiscsi: Fix error count for active session
scsi: hpsa: correct race condition in offload enabled
scsi: message: fusion: Replace zero-length array with flexible-array member
scsi: qedi: Add PCI shutdown handler support
scsi: qedi: Add MFW error recovery process
scsi: ufs: Enable block layer runtime PM for well-known logical units
scsi: ufs-qcom: Override devfreq parameters
scsi: ufshcd: Let vendor override devfreq parameters
scsi: ufshcd: Update the set frequency to devfreq
scsi: ufs: Resume ufs host before accessing ufs device
scsi: ufs-mediatek: customize the delay for enabling host
scsi: ufs: make HCE polling more compact to improve initialization latency
scsi: ufs: allow custom delay prior to host enabling
scsi: ufs-mediatek: use common delay function
scsi: ufs: introduce common and flexible delay function
scsi: ufs: use an enum for host capabilities
scsi: ufs: fix uninitialized tx_lanes in ufshcd_disable_tx_lcc()
...
Pull trivial tree updates from Jiri Kosina:
"My attempt to revitalize trivial queue I've been neglecting for years
(what a disaster that was for this world, right? :) ) with patches
collected from backlog that were still relevant and not applied
elsewhere in the meantime"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
err.h: remove deprecated PTR_RET for good
blk-mq: Fix typo in comment
x86/boot: Fix comment spelling
sh: mach-highlander: Fix comment spelling
s390/dasd: Fix comment spelling
mfd: wm8994: Fix comment spelling
docs: Add reference in binfmt-misc.rst
genirq: fix kerneldoc comment for irq_desc
drm/amdgpu: fix two documentation mismatch issues
HID: fix Kconfig word ordering
list/hashtable: minor documentation corrections.
Pull networking updates from David Miller:
"Highlights:
1) Fix the iwlwifi regression, from Johannes Berg.
2) Support BSS coloring and 802.11 encapsulation offloading in
hardware, from John Crispin.
3) Fix some potential Spectre issues in qtnfmac, from Sergey
Matyukevich.
4) Add TTL decrement action to openvswitch, from Matteo Croce.
5) Allow paralleization through flow_action setup by not taking the
RTNL mutex, from Vlad Buslov.
6) A lot of zero-length array to flexible-array conversions, from
Gustavo A. R. Silva.
7) Align XDP statistics names across several drivers for consistency,
from Lorenzo Bianconi.
8) Add various pieces of infrastructure for offloading conntrack, and
make use of it in mlx5 driver, from Paul Blakey.
9) Allow using listening sockets in BPF sockmap, from Jakub Sitnicki.
10) Lots of parallelization improvements during configuration changes
in mlxsw driver, from Ido Schimmel.
11) Add support to devlink for generic packet traps, which report
packets dropped during ACL processing. And use them in mlxsw
driver. From Jiri Pirko.
12) Support bcmgenet on ACPI, from Jeremy Linton.
13) Make BPF compatible with RT, from Thomas Gleixnet, Alexei
Starovoitov, and your's truly.
14) Support XDP meta-data in virtio_net, from Yuya Kusakabe.
15) Fix sysfs permissions when network devices change namespaces, from
Christian Brauner.
16) Add a flags element to ethtool_ops so that drivers can more simply
indicate which coalescing parameters they actually support, and
therefore the generic layer can validate the user's ethtool
request. Use this in all drivers, from Jakub Kicinski.
17) Offload FIFO qdisc in mlxsw, from Petr Machata.
18) Support UDP sockets in sockmap, from Lorenz Bauer.
19) Fix stretch ACK bugs in several TCP congestion control modules,
from Pengcheng Yang.
20) Support virtual functiosn in octeontx2 driver, from Tomasz
Duszynski.
21) Add region operations for devlink and use it in ice driver to dump
NVM contents, from Jacob Keller.
22) Add support for hw offload of MACSEC, from Antoine Tenart.
23) Add support for BPF programs that can be attached to LSM hooks,
from KP Singh.
24) Support for multiple paths, path managers, and counters in MPTCP.
From Peter Krystad, Paolo Abeni, Florian Westphal, Davide Caratti,
and others.
25) More progress on adding the netlink interface to ethtool, from
Michal Kubecek"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2121 commits)
net: ipv6: rpl_iptunnel: Fix potential memory leak in rpl_do_srh_inline
cxgb4/chcr: nic-tls stats in ethtool
net: dsa: fix oops while probing Marvell DSA switches
net/bpfilter: remove superfluous testing message
net: macb: Fix handling of fixed-link node
net: dsa: ksz: Select KSZ protocol tag
netdevsim: dev: Fix memory leak in nsim_dev_take_snapshot_write
net: stmmac: add EHL 2.5Gbps PCI info and PCI ID
net: stmmac: add EHL PSE0 & PSE1 1Gbps PCI info and PCI ID
net: stmmac: create dwmac-intel.c to contain all Intel platform
net: dsa: bcm_sf2: Support specifying VLAN tag egress rule
net: dsa: bcm_sf2: Add support for matching VLAN TCI
net: dsa: bcm_sf2: Move writing of CFP_DATA(5) into slicing functions
net: dsa: bcm_sf2: Check earlier for FLOW_EXT and FLOW_MAC_EXT
net: dsa: bcm_sf2: Disable learning for ASP port
net: dsa: b53: Deny enslaving port 7 for 7278 into a bridge
net: dsa: b53: Prevent tagged VLAN on port 7 for 7278
net: dsa: b53: Restore VLAN entries upon (re)configuration
net: dsa: bcm_sf2: Fix overflow checks
hv_netvsc: Remove unnecessary round_up for recv_completion_cnt
...
-----BEGIN PGP SIGNATURE-----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=6Glq
-----END PGP SIGNATURE-----
Merge tag 'for-5.7/block-2020-03-29' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
- Online capacity resizing (Balbir)
- Number of hardware queue change fixes (Bart)
- null_blk fault injection addition (Bart)
- Cleanup of queue allocation, unifying the node/no-node API
(Christoph)
- Cleanup of genhd, moving code to where it makes sense (Christoph)
- Cleanup of the partition handling code (Christoph)
- disk stat fixes/improvements (Konstantin)
- BFQ improvements (Paolo)
- Various fixes and improvements
* tag 'for-5.7/block-2020-03-29' of git://git.kernel.dk/linux-block: (72 commits)
block: return NULL in blk_alloc_queue() on error
block: move bio_map_* to blk-map.c
Revert "blkdev: check for valid request queue before issuing flush"
block: simplify queue allocation
bcache: pass the make_request methods to blk_queue_make_request
null_blk: use blk_mq_init_queue_data
block: add a blk_mq_init_queue_data helper
block: move the ->devnode callback to struct block_device_operations
block: move the part_stat* helpers from genhd.h to a new header
block: move block layer internals out of include/linux/genhd.h
block: move guard_bio_eod to bio.c
block: unexport get_gendisk
block: unexport disk_map_sector_rcu
block: unexport disk_get_part
block: mark part_in_flight and part_in_flight_rw static
block: mark block_depr static
block: factor out requeue handling from dispatch code
block/diskstats: replace time_in_queue with sum of request times
block/diskstats: accumulate all per-cpu counters in one pass
block/diskstats: more accurate approximation of io_ticks for slow disks
...
Enable the L3 driver's IPv4 address notifier to watch for events on qeth
devices that have been moved into a net namespace. We need to program
those IPs into the HW just as usual, otherwise inbound traffic won't
flow.
Fixes: 6133fb1aa1 ("[NETNS]: Disable inetaddr notifiers in namespaces other than initial.")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
OSN devices currently spend an awful long time in qeth_l2_set_online()
until various unsupported HW cmds time out. This has been broken for
over two years, ever since
commit d22ffb5a71 ("s390/qeth: fix IPA command submission race")
triggered a FW bug in cmd processing.
Prior to commit 782e4a7921 ("s390/qeth: don't poll for cmd IO completion"),
this wait for timeout would have even been spent busy-polling.
The offending patch was picked up by stable and all relevant distros,
and yet noone noticed.
OSN setups only ever worked in combination with an out-of-tree blob, and
the last machine that even offered HW with OSN support was released back
in 2015.
Rather than attempting to work-around this FW issue for no actual gain,
add a deprecation warning so anyone who still wants to maintain this
part of the code can speak up. Else rip it all out in 2021.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The last machine generation that supports OSN is z13, and OSX is only
supported up to z14. Allow users and distros to decide whether they
still need support for these device types.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ever since commit 4a71df5004 ("qeth: new qeth device driver") introduced
this attribute, it can be read & written but has no actual effect.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Current make_request based drivers use either blk_alloc_queue_node or
blk_alloc_queue to allocate a queue, and then set up the make_request_fn
function pointer and a few parameters using the blk_queue_make_request
helper. Simplify this by passing the make_request pointer to
blk_alloc_queue, and while at it merge the _node variant into the main
helper by always passing a node_id, and remove the superfluous gfp_mask
parameter. A lower-level __blk_alloc_queue is kept for the blk-mq case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Set up qdio_irq->cdev right when the qdio_irq struct is allocated, so
that all subsequent code can rely on this pointer.
Then convert two helper functions to not pass a cdev parameter around.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
As s390 no longer supports ARCH_HIBERNATION_POSSIBLE, drop the unused
pm ops from the ccwgroup bus driver.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The s390 power management support has been removed. So the
api registration and the suspend and resume callbacks and
all the code related to this for the ap bus and the ap drivers
is removed with this patch.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Tests showed that it may happen that a 256k kmalloc may fail
due to a temporary shortage on 256k slab entries.
The find functions for cca and ep11 use a 256k array to fetch the
states of all possible crypto cards and their domains in one
piece. With the patch now kvmalloc is used to allocate this
temporary memory as there is no need to have this memory area
physical continuously.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
As s390 no longer supports ARCH_HIBERNATION_POSSIBLE, drop the unused
pm ops from the ism driver.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Overlapping header include additions in macsec.c
A bug fix in 'net' overlapping with the removal of 'version'
string in ena_netdev.c
Overlapping test additions in selftests Makefile
Overlapping PCI ID table adjustments in iwlwifi driver.
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace list_for_each() with list_for_each_entry(), and
list_entry(head.next) with list_first_entry().
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a device is configured in prio-queue mode to pin all traffic onto
a specific HW queue, treat this as a distinct variant of prio-queueing
instead of QETH_NO_PRIO_QUEUEING.
This corrects an error message from qeth_osa_set_output_queues() for
devices configured in such a mode.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Return the correct errnos when .ndo_set_mac_address fails to set a new
MAC address.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since IQD devices complete (most of) their transmissions synchronously,
they don't offer TX completion IRQs and have no HW coalescing controls.
But we can fake the easy parts in SW, and give the user some control wrt
to how often the TX NAPI code should be triggered to process the TX
completions.
Having per-queue controls can in particular help the dedicated mcast
queue, as it likely benefits from different fine-tuning than what the
ucast queues need.
CC: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Count the number of TX doorbells we issue to the qdio layer.
Also count the number of actual frames in a TX buffer, and then
use this data along with the byte count during TX completion.
We'll make additional use of the frame count in a subsequent patch.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We're down to a single bit flag for MAC-address related status, reflect
that in the info struct.
Also set up the flag during initialization instead of clearing it during
shutdown - one more little step towards unifying the shutdown code.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The logic that deals with errors from qeth_l3_get_unique_id() is quite
complex: it sets card->unique_id to 0xfffe, additionally flags it as
UNIQUE_ID_NOT_BY_CARD and later takes this flag as cue to not propagate
card->unique_id to dev->dev_id. With dev->dev_id thus holding 0,
addrconf_ifid_eui48() applies its default behaviour.
Get rid of all the special bit masks, and just return the old uid in
case of an error. For the vast majority of cases this will be 0 (and so
we still get the desired default behaviour) - with the rare exception
where qeth_l3_get_unique_id() might have been called earlier but the
initialization then failed at a later point.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the support for polling drivers was initially added, it only
considered Input Queue 0. But as QDIO interrupts are actually for the
full device and not a single queue, this doesn't really fit for
configurations where multiple Input Queues are used.
Rework the qdio code so that interrupts for a polling driver are not
split up into actions for each queue. Instead deliver the interrupt as
a single event, and let the driver decide which queue needs what action.
When re-enabling the QDIO interrupt via qdio_start_irq(), this means
that the qdio code needs to
(1) put _all_ eligible queues back into a state where they raise IRQs,
(2) and afterwards check _all_ eligible queues for new work to bridge
the race window.
On the qeth side of things (as the only qdio polling driver), we can now
add CQ polling support to the main NAPI poll routine. It doesn't consume
NAPI budget, and to avoid hogging the CPU we yield control after
completing one full queue worth of buffers.
The subsequent qdio_start_irq() will check for any additional work, and
have us re-schedule the NAPI instance accordingly.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Whenever all completed RX buffers have been processed
(ie. rx->b_count == 0), we call down to the HW layer to scan for
additional buffers. If no further buffers are available, the code
breaks out of the while-loop.
So we never reach the 'process an RX buffer' step with rx->b_count == 0,
eliminate that check and one level of indentation.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The main NAPI poll routine should eventually handle more types of work,
beyond just the RX ring.
Split off the RX poll logic into a separate function, and simplify the
nested while-loop.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since RX buffers may contain multiple packets, qeth's NAPI poll code can
exhaust its budget in the middle of an RX buffer. Thus we keep track of
our current position within the active RX buffer, so we can resume
processing here in the next NAPI poll period.
Clean up that code by tracking the index of the active buffer element,
instead of a pointer to it.
Also simplify the code that advances to the next RX buffer when the
current buffer has been fully processed.
v2: - remove QDIO_ELEMENT_NO() macro (davem)
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With the removal of the s390 hibernate support the suspend and
resume callbacks for the ap devices are not needed any more.
This patch removes the callbacks and the ap bus' registration
struct for the power management.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
When issuing a SADC for a QDIO device, don't hardcode the ISC but use
whatever is specified in qdio's handler for Adapter Interrupts.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
snprintf() may not always return the correct size of used bytes but
instead the length the resulting string would be if it would fit into
the buffer. So scnprintf() is the function to use when the real length
of the resulting string is needed.
Replace all occurrences of snprintf() with scnprintf() where the return
code is further processed. Also find and fix some occurrences where
sprintf() was used.
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit. Fix it by replacing with scnprintf().
Message-Id: <20200311090915.21059-1-tiwai@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
To check whether a netdevice has already been registered, look at
NETREG_REGISTERED to replace some hacks I added a while ago.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
qeth_do_ioctl() is only reached through our own net_device_ops, so we
can trust that dev->ml_priv still contains what we put there earlier.
qeth_bridgeport_an_set() is an internal function that doesn't require
such sanity checks.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Data addresses in the AOB are absolute, and need to be translated before
being fed into kmem_cache_free(). Currently this phys_to_virt() is a no-op.
Also see commit 2db01da8d2 ("s390/qdio: fill SBALEs with absolute addresses").
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Versions are meaningless for an in-kernel driver.
Instead use the UTS_RELEASE that is set by ethtool_get_drvinfo().
Cc: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds support for SOF_TIMESTAMPING_TX_SOFTWARE.
No support for non-IQD devices, since they orphan the skb in their xmit
path.
To play nice with TX bulking, set the timestamp when the buffer that
contains the skb(s) is actually flushed out to HW.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For ucast traffic, qeth_iqd_select_queue() falls back to
netdev_pick_tx(). This will potentially use skb_tx_hash() to distribute
the flow over all active TX queues - so txq 0 is a valid selection, and
qeth_iqd_select_queue() needs to check for this and put it on some other
queue. As a result, the distribution for ucast flows is unbalanced and
hits QETH_IQD_MIN_UCAST_TXQ heavier than the other queues.
Open-coding a custom variant of skb_tx_hash() isn't an option, since
netdev_pick_tx() also gives us eg. access to XPS. But we can pull a
little trick: add a single TC class that excludes the mcast txq, and
thus encourage skb_tx_hash() to not pick the mcast txq.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similar to the support for z/VM NICs, but we need to take extra care
about the dedicated mcast queue:
1. netdev_pick_tx() is unaware of this limitation and might select the
mcast txq. Catch this.
2. require at least _two_ TX queues - one for ucast, one for mcast.
3. when reducing the number of TX queues, there's a potential race
where netdev_cap_txqueue() over-rules the selected txq index and
falls back to index 0. This would place ucast traffic on the mcast
queue, and result in TX errors.
So for IQD, reject a reduction while the interface is running.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for ETHTOOL_SCHANNELS to change the count of active
TX queues.
Since all TX queue structs are pre-allocated and -registered, we just
need to trivially adjust dev->real_num_tx_queues.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
z/VM NICs don't offer HW QoS for TX rings. So just use netdev_pick_tx()
to distribute the connections equally over all enabled TX queues.
We start with just 1 enabled TX queue (this matches the typical
configuration without prio-queueing). A follow-on patch will allow users
to enable additional TX queues.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When falling back to an allocation from the HW header cache, check if
the skb is eligible for using memory reserves.
This only makes a difference if the cache is empty and needs to be
refilled.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use dev_alloc_page() for backing the RX buffers with pages. This way we
pick up __GFP_MEMALLOC.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Log any FC Endpoint Security errors to the kernel ring buffer with rate-
limiting.
Link: https://lore.kernel.org/r/20200312174505.51294-11-maier@linux.ibm.com
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Enable for explicit FCP channel FC Endpoint Security error reporting and
handle any FSF security errors according to specification. Take the
following recovery actions when a FSF_SECURITY_ERROR is reported for the
specified FSF commands:
- Open Port: Retry the command if possible
- Send FCP : Physically close the remote port and reopen
For Open Port the command status is set to error, which triggers a retry.
For Send FCP the command status is set to error and recovery is triggered
to physically reopen the remote port.
Link: https://lore.kernel.org/r/20200312174505.51294-10-maier@linux.ibm.com
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Trace changes in Fibre Channel Endpoint Security capabilities of FCP
devices as well as changes in Fibre Channel Endpoint Security state of
their connections to FC remote ports as FC Endpoint Security changes with
trace level 3 in HBA DBF.
A change in FC Endpoint Security capabilities of FCP devices is traced as
response to FSF command FSF_QTCB_EXCHANGE_PORT_DATA with a trace tag of
"fsfcesa" and a WWPN of ZFCP_DBF_INVALID_WWPN = 0x0000000000000000 (see
FC-FS-4 §18 "Name_Identifier Formats", NAA field).
A change in FC Endpoint Security state of connections between FCP devices
and FC remote ports is traced as response to FSF command
FSF_QTCB_OPEN_PORT_WITH_DID with a trace tag of "fsfcesp".
Example trace record of FC Endpoint Security capability change of FCP
device formatted with zfcpdbf from s390-tools:
Timestamp : ...
Area : HBA
Subarea : 00
Level : 3
Exception : -
CPU ID : ...
Caller : 0x...
Record ID : 5 ZFCP_DBF_HBA_FCES
Tag : fsfcesa FSF FC Endpoint Security adapter
Request ID : 0x...
Request status : 0x00000010
FSF cmnd : 0x0000000e FSF_QTCB_EXCHANGE_PORT_DATA
FSF sequence no: 0x...
FSF issued : ...
FSF stat : 0x00000000 FSF_GOOD
FSF stat qual : n/a
Prot stat : n/a
Prot stat qual : n/a
Port handle : 0x00000000 none (invalid)
LUN handle : n/a
WWPN : 0x0000000000000000 ZFCP_DBF_INVALID_WWPN
FCES old : 0x00000000 old FC Endpoint Security
FCES new : 0x00000007 new FC Endpoint Security
Example trace record of FC Endpoint Security change of connection to
FC remote port formatted with zfcpdbf from s390-tools:
Timestamp : ...
Area : HBA
Subarea : 00
Level : 3
Exception : -
CPU ID : ...
Caller : 0x...
Record ID : 5 ZFCP_DBF_HBA_FCES
Tag : fsfcesp FSF FC Endpoint Security port
Request ID : 0x...
Request status : 0x00000010
FSF cmnd : 0x00000005 FSF_QTCB_OPEN_PORT_WITH_DID
FSF sequence no: 0x...
FSF issued : ...
FSF stat : 0x00000000 FSF_GOOD
FSF stat qual : n/a
Prot stat : n/a
Prot stat qual : n/a
Port handle : 0x...
WWPN : 0x500507630401120c WWPN
FCES old : 0x00000000 old FC Endpoint Security
FCES new : 0x00000004 new FC Endpoint Security
Link: https://lore.kernel.org/r/20200312174505.51294-9-maier@linux.ibm.com
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Log the usage of and subsequent changes in FC Endpoint Security of
connections between FCP devices and FC remote ports to the kernel ring
buffer. Activation of FC Endpoint Security is logged as informational.
Change and deactivation are logged as warning.
No logging takes place, if FC Endpoint Security is not used (i.e. never
activated) on a connection or if it does not change during reopen of a port
(e.g. due to adapter or port recovery).
Link: https://lore.kernel.org/r/20200312174505.51294-8-maier@linux.ibm.com
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Fedor Loshakov <loshakov@linux.ibm.com>
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add an interface to read Fibre Channel Endpoint Security information of FCP
channels and their connections to FC remote ports. It comes in the form of
new sysfs attributes that are attached to the CCW device representing the
FCP device and its zfcp port objects.
The read-only sysfs attribute "fc_security" of a CCW device representing a
FCP device shows the FC Endpoint Security capabilities of the device.
Possible values are: "unknown", "unsupported", "none", or a comma-
separated list of one or more mnemonics and/or one hexadecimal value
representing the supported FC Endpoint Security:
Authentication: Authentication supported
Encryption : Encryption supported
The read-only sysfs attribute "fc_security" of a zfcp port object shows the
FC Endpoint Security used on the connection between its parent FCP device
and the FC remote port. Possible values are: "unknown", "unsupported",
"none", or a mnemonic or hexadecimal value representing the FC Endpoint
Security used:
Authentication: Connection has been authenticated
Encryption : Connection is encrypted
Both sysfs attributes may return hexadecimal values instead of mnemonics,
if the mnemonic lookup table does not contain an entry for the FC Endpoint
Security reported by the FCP device.
Link: https://lore.kernel.org/r/20200312174505.51294-7-maier@linux.ibm.com
Reviewed-by: Fedor Loshakov <loshakov@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Introduce automatic variables for adapter and QTCB bottom in
zfcp_fsf_open_port_handler(). This facilitates subsequent changes to meet
the 80 character per line limit.
Link: https://lore.kernel.org/r/20200312174505.51294-6-maier@linux.ibm.com
Reviewed-by: Fedor Loshakov <loshakov@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When we get an unsolicited notification on local link went down,
zfcp_fsf_status_read_link_down() calls zfcp_fsf_link_down_info_eval().
This only blocks rports, and sets ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED and
ZFCP_STATUS_COMMON_ERP_FAILED. Only the fc_host port_state changes to
"Linkdown", because zfcp_scsi_get_host_port_state() is an active callback
and uses the adapter status.
Other fc_host attributes model, port_id, port_type, speed, fabric_name (and
zfcp device attributes card_version, peer_wwpn, peer_wwnn, peer_d_id) which
depend on a local link, continued to show their last known "good" value.
Only if something triggered an exchange config data, some values were
updated to their unknown equivalent via case
FSF_EXCHANGE_CONFIG_DATA_INCOMPLETE due to local link down. Triggers for
exchange config data are adapter recovery, or reading any of the following
zfcp-specific scsi host sysfs attributes "requests", "megabytes", or
"seconds_active" in /sys/devices/css*/*.*.*/*.*.*/host*/scsi_host/host*/.
The other fc_host attributes active_fc4s and permanent_port_name continued
to show their last known "good" value. Only if something triggered an
exchange port data, some values changed. Active_fc4s became all zeros as
unknown equivalent during link down. Permanent_port_name does not depend
on a local link. But for non-NPIV FCP devices, permanent_port_name
erroneously became whatever value fc_host port_name had at that point in
time (see previous paragraph). Triggers for exchange port data are the
zfcp-specific scsi host sysfs attribute "utilization", or
[{reset,get}_fc_host_stats] write anything into "reset_statistics" or read
any of the other attributes under
/sys/devices/css*/*.*.*/*.*.*/host*/fc_host/host*/statistics/.
(cf. v4.9 commit bd77befa5b ("zfcp: fix fc_host port_type with NPIV"))
This is particularly confusing when using "lszfcp -b <fcpdevbusid> -Ha" or
dbginfo.sh which read fc_host attributes and also scsi_host attributes.
After link down, the first invocation produces (abbreviated):
Class = "fc_host"
active_fc4s = "0x00 0x00 0x01 0x00 ..."
...
fabric_name = "0x10000027f8e04c49"
...
permanent_port_name = "0xc05076e4588059c1"
port_id = "0x244800"
port_state = "Linkdown"
port_type = "NPort (fabric via point-to-point)"
...
speed = "16 Gbit"
Class = "scsi_host"
...
megabytes = "0 0"
...
requests = "0 0 0"
seconds_active = "37"
...
utilization = "0 0 0"
The second and next invocations produce (abbreviated):
Class = "fc_host"
active_fc4s = "0x00 0x00 0x00 0x00 ..."
...
fabric_name = "0x0"
...
permanent_port_name = "0x0"
port_id = "0x000000"
port_state = "Linkdown"
port_type = "Unknown"
...
speed = "unknown"
Class = "scsi_host"
...
megabytes = "0 0"
...
requests = "0 0 0"
seconds_active = "38"
...
utilization = "0 0 0"
Factor out the resetting of local link dependent fc_host attributes from
zfcp_fsf_exchange_config_data_handler() case
FSF_EXCHANGE_CONFIG_DATA_INCOMPLETE into a new helper function
zfcp_fsf_fc_host_link_down(). All code places that detect local link down
(SRB, FSF_PROT_LINK_DOWN, xconf data/port incomplete) call
zfcp_fsf_link_down_info_eval(). Call the new helper from there. This works
because zfcp_fsf_link_down_info_eval() and thus the helper is called before
zfcp_fsf_exchange_{config,port}_evaluate().
Port_name and node_name are always valid, so never reset them.
Get the permanent_port_name from exchange port data unconditionally as it
always has a valid known good value, even during link down.
Note: Rather than hardcode in zfcp_fsf_exchange_config_evaluate(), fc_host
supported_classes could theoretically get its value from
fsf_qtcb_bottom_port.class_of_service in zfcp_fsf_exchange_port_evaluate().
When the link comes back, we get a different notification, perform adapter
recovery, and this triggers an implicit exchange config data followed by
exchange port data filling in the link dependent fc_host attributes with
known good values again.
Link: https://lore.kernel.org/r/20200312174505.51294-5-maier@linux.ibm.com
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Manufacturer, HBA model, firmware version, and hardware version. Use the
same value format as for the driver-specific attributes. Keep the
driver-specific attributes for stable user space sysfs API.
Link: https://lore.kernel.org/r/20200312174505.51294-4-maier@linux.ibm.com
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
FICON Express8S or older, as well as card features newer than FICON
Express16S+ have no certain firmware level requirement.
FICON Express16S or FICON Express16S+ have the following
minimum firmware level requirements to show a proper fabric name value:
z13 machine
FICON Express16S , MCL P08424.005 , LIC version 0x00000721
z14 machine
FICON Express16S , MCL P42611.008 , LIC version 0x10200069
FICON Express16S+ , MCL P42625.010 , LIC version 0x10300147
Otherwise, the read value is not the fabric name.
Each FCP channel of these card features might need one SAN fabric re-login
after concurrent microcode update in order to show the proper fabric name.
Possible ways to trigger a SAN fabric re-login are one of: Pull fibres
between FCP channel port and SAN switch port on either side and re-plug,
disable SAN switch port adjacent to FCP channel port and re-enable switch
port, or at Service Element toggle off all CHPIDs of FCP channel over all
LPARs and toggle CHPIDs on again. Zfcp operating subchannels (FCP devices)
on such FCP channel recovers a fabric re-login.
Initialize fabric name for any topology and have it an invalid WWPN 0x0 for
anything but fabric topology. Otherwise for e.g. point-to-point topology
one could see the initial -1 from fc_host_setup() and after a link unplug
our fabric name would turn to 0x0 (with subsequent commit ("zfcp: fix
fc_host attributes that should be unknown on local link down") and stay 0x0
on link replug. I did not initialize to 0x0 somewhere even earlier in the
code path such that it would not flap from real to 0x0 to real on e.g. an
exchange config data with fabric topology.
Link: https://lore.kernel.org/r/20200312174505.51294-3-maier@linux.ibm.com
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
v2.6.27 commit cc8c282963 ("[SCSI] zfcp: Automatically attach remote
ports") introduced zfcp automatic port scan.
Before that, the user had to use the sysfs attribute "port_add" of an FCP
device (adapter) to add and open remote (target) ports, even for the remote
peer port in point-to-point topology. That code path did a proper port open
recovery trigger taking the erp_lock.
Since above commit, a new helper function zfcp_erp_open_ptp_port()
performed an UNlocked port open recovery trigger. This can race with other
parallel recovery triggers. In zfcp_erp_action_enqueue() this could corrupt
e.g. adapter->erp_total_count or adapter->erp_ready_head.
As already found for fabric topology in v4.17 commit fa89adba19 ("scsi:
zfcp: fix infinite iteration on ERP ready list"), there was an endless loop
during tracing of rport (un)block. A subsequent v4.18 commit 9e156c54ac
("scsi: zfcp: assert that the ERP lock is held when tracing a recovery
trigger") introduced a lockdep assertion for that case.
As a side effect, that lockdep assertion now uncovered the unlocked code
path for PtP. It is from within an adapter ERP action:
zfcp_erp_strategy[1479] intentionally DROPs erp lock around
zfcp_erp_strategy_do_action()
zfcp_erp_strategy_do_action[1441] NO erp lock
zfcp_erp_adapter_strategy[876] NO erp lock
zfcp_erp_adapter_strategy_open[855] NO erp lock
zfcp_erp_adapter_strategy_open_fsf[806]NO erp lock
zfcp_erp_adapter_strat_fsf_xconf[772] erp lock only around
zfcp_erp_action_to_running(),
BUT *_not_* around
zfcp_erp_enqueue_ptp_port()
zfcp_erp_enqueue_ptp_port[728] BUG: *_not_* taking erp lock
_zfcp_erp_port_reopen[432] assumes to be called with erp lock
zfcp_erp_action_enqueue[314] assumes to be called with erp lock
zfcp_dbf_rec_trig[288] _checks_ to be called with erp lock:
lockdep_assert_held(&adapter->erp_lock);
It causes the following lockdep warning:
WARNING: CPU: 2 PID: 775 at drivers/s390/scsi/zfcp_dbf.c:288
zfcp_dbf_rec_trig+0x16a/0x188
no locks held by zfcperp0.0.17c0/775.
Fix this by using the proper locked recovery trigger helper function.
Link: https://lore.kernel.org/r/20200312174505.51294-2-maier@linux.ibm.com
Fixes: cc8c282963 ("[SCSI] zfcp: Automatically attach remote ports")
Cc: <stable@vger.kernel.org> #v2.6.27+
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-----BEGIN PGP SIGNATURE-----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=eRvn
-----END PGP SIGNATURE-----
Merge tag 'block-5.6-2020-03-13' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A few fixes that should go into this release. This contains:
- Fix for a corruption issue with the s390 dasd driver (Stefan)
- Fixup/improvement for the flush insertion change that we had in
this series (Ming)
- Fix for the partition suppor for host aware zoned devices
(Shin'ichiro)
- Fix incorrect blk-iocost comparison (Tejun)
The diffstat looks large, but that's a) mostly dasd, and b) the flush
fix from Ming adds a big comment"
* tag 'block-5.6-2020-03-13' of git://git.kernel.dk/linux-block:
block: Fix partition support for host aware zoned block devices
blk-mq: insert flush request to the front of dispatch queue
s390/dasd: fix data corruption for thin provisioned devices
blk-iocost: fix incorrect vtime comparison in iocg_is_idle()
Pull networking fixes from David Miller:
"It looks like a decent sized set of fixes, but a lot of these are one
liner off-by-one and similar type changes:
1) Fix netlink header pointer to calcular bad attribute offset
reported to user. From Pablo Neira Ayuso.
2) Don't double clear PHY interrupts when ->did_interrupt is set,
from Heiner Kallweit.
3) Add missing validation of various (devlink, nl802154, fib, etc.)
attributes, from Jakub Kicinski.
4) Missing *pos increments in various netfilter seq_next ops, from
Vasily Averin.
5) Missing break in of_mdiobus_register() loop, from Dajun Jin.
6) Don't double bump tx_dropped in veth driver, from Jiang Lidong.
7) Work around FMAN erratum A050385, from Madalin Bucur.
8) Make sure ARP header is pulled early enough in bonding driver,
from Eric Dumazet.
9) Do a cond_resched() during multicast processing of ipvlan and
macvlan, from Mahesh Bandewar.
10) Don't attach cgroups to unrelated sockets when in interrupt
context, from Shakeel Butt.
11) Fix tpacket ring state management when encountering unknown GSO
types. From Willem de Bruijn.
12) Fix MDIO bus PHY resume by checking mdio_bus_phy_may_suspend()
only in the suspend context. From Heiner Kallweit"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (112 commits)
net: systemport: fix index check to avoid an array out of bounds access
tc-testing: add ETS scheduler to tdc build configuration
net: phy: fix MDIO bus PM PHY resuming
net: hns3: clear port base VLAN when unload PF
net: hns3: fix RMW issue for VLAN filter switch
net: hns3: fix VF VLAN table entries inconsistent issue
net: hns3: fix "tc qdisc del" failed issue
taprio: Fix sending packets without dequeueing them
net: mvmdio: avoid error message for optional IRQ
net: dsa: mv88e6xxx: Add missing mask of ATU occupancy register
net: memcg: fix lockdep splat in inet_csk_accept()
s390/qeth: implement smarter resizing of the RX buffer pool
s390/qeth: refactor buffer pool code
s390/qeth: use page pointers to manage RX buffer pool
seg6: fix SRv6 L2 tunnels to use IANA-assigned protocol number
net: dsa: Don't instantiate phylink for CPU/DSA ports unless needed
net/packet: tpacket_rcv: do not increment ring index on drop
sxgbe: Fix off by one in samsung driver strncpy size arg
net: caif: Add lockdep expression to RCU traversal primitive
MAINTAINERS: remove Sathya Perla as Emulex NIC maintainer
...
Devices are formatted in multiple of tracks.
For an Extent Space Efficient (ESE) volume we get errors when accessing
unformatted tracks. In this case the driver either formats the track on
the flight for write requests or returns zero data for read requests.
In case a request spans multiple tracks, the indication of an unformatted
track presented for the first track is incorrectly applied to all tracks
covered by the request. As a result, tracks containing data will be handled
as empty, resulting in zero data being returned on read, or overwriting
existing data with zero on write.
Fix by determining the track that gets the NRF error.
For write requests only format the track that is surely not formatted.
For Read requests all tracks before have returned valid data and should not
be touched.
All tracks after the unformatted track might be formatted or not. Those are
returned to the blocklayer to build a new request.
When using alias devices there is a chance that multiple write requests
trigger a format of the same track which might lead to data loss. Ensure
that a track is formatted only once by maintaining a list of currently
processed tracks.
Fixes: 5e2b17e712 ("s390/dasd: Add dynamic formatting support for ESE volumes")
Cc: stable@vger.kernel.org # 5.3+
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The RX buffer pool is allocated in qeth_alloc_qdio_queues().
A subsequent pool resizing is then handled in a very simple way:
first free the current pool, then allocate a new pool of the requested
size.
There's two ways where this can go wrong:
1. if the resize action happens _before_ the initial pool was allocated,
then a subsequent initialization will call qeth_alloc_qdio_queues()
and fill the pool with a second(!) set of pages. We consume twice the
planned amount of memory.
This is easy to fix - just skip the resizing if the queues haven't
been allocated yet.
2. if the initial pool was created by qeth_alloc_qdio_queues() but a
subsequent resizing fails, then the device has no(!) RX buffer pool.
The next initialization will _not_ call qeth_alloc_qdio_queues(), and
attempting to back the RX buffers with pages in
qeth_init_qdio_queues() will fail.
Not very difficult to fix either - instead of re-allocating the whole
pool, just allocate/free as many entries to match the desired size.
Fixes: 4a71df5004 ("qeth: new qeth device driver")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation for a subsequent fix, split out helpers to allocate/free
individual pool entries.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The RX buffer elements are always backed with full pages, reflect this
in the pointer type.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
request_irq() is preferred over setup_irq(). Invocations of setup_irq()
occur after memory allocators are ready.
Per tglx[1], setup_irq() existed in olden days when allocators were not
ready by the time early interrupts were initialized.
Hence replace setup_irq() by request_irq().
[1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos
Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com>
Message-Id: <20200304005049.5291-1-afzal.mohd.ma@gmail.com>
[heiko.carstens@de.ibm.com: replace pr_err with panic]
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
When qeth's napi poll code fails to refill an entirely empty RX ring, it
kicks off buffer_reclaim_work to try again later.
Make sure that this worker is cancelled when setting the qeth device
offline. Otherwise a RX refill action can unexpectedly end up running
concurrently to bigger re-configurations (eg. resizing the buffer pool),
without any locking.
Fixes: b333293058 ("qeth: add support for af_iucv HiperSockets transport")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
qeth_init_qdio_queues() fills the RX ring with an initial set of
RX buffers. If qeth_init_input_buffer() fails to back one of the RX
buffers with memory, we need to bail out and report the error.
Fixes: 4a71df5004 ("qeth: new qeth device driver")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When an OSA device in prio-queue setup is reduced to 1 TX queue due to
HW restrictions, we reset its the default_out_queue to 0.
In the old code this was needed so that qeth_get_priority_queue() gets
the queue selection right. But with proper multiqueue support we already
reduced dev->real_num_tx_queues to 1, and so the stack puts all traffic
on txq 0 without even calling .ndo_select_queue.
Thus we can preserve the user's configuration, and apply it if the OSA
device later re-gains support for multiple TX queues.
Fixes: 73dc2daf11 ("s390/qeth: add TX multiqueue support for OSA devices")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After recent cleanups this is just a complicated wrapper around an u32*.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Once the call to qdio_establish() has completed, qdio is free to deliver
data IRQs to the device driver's IRQ poll handler.
For qeth (the only qdio driver that currently uses IRQ polling) this is
problematic, since the IRQs can arrive before its NAPI instance is
even registered. Calling napi_schedule() from qeth_qdio_start_poll()
then crashes in various nasty ways.
Until recently qeth checked for IFF_UP to drop such early interrupts,
but that's fragile as well since it doesn't enforce any ordering.
Fix this properly by bringing up the qdio device in IRQS_DISABLED mode,
and have the driver explicitly opt-in to receive data IRQs.
qeth does so from qeth_open(), which kick-starts a NAPI poll and then
calls qdio_start_irq() from qeth_poll().
Also add a matching qdio_stop_irq() in qeth_stop() to switch the qdio
dataplane back into a disabled state.
Fixes: 3d35dbe622 ("s390/qeth: don't check for IFF_UP when scheduling napi")
CC: Qian Cai <cai@lca.pw>
Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While we print out various SSQD fields at initialization time, having
raw & full access to the current SSQD can help with debugging.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Four small fixes. Three are in drivers for fairly obvious bugs. The
fourth is a set of regressions introduced by the compat_ioctl changes
because some of the compat updates wrongly replaced .ioctl instead of
.compat_ioctl.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXlpxDCYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishSXsAPwOGPkU
ObFbUs75Tdmk1M7jqtxgBsNhuNta0S8d7dJ3aAEA/YBtGGQWoeEGivUKwzwA4cwL
1w1GbhPEblpMNO8keVA=
=I7qk
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Four small fixes.
Three are in drivers for fairly obvious bugs. The fourth is a set of
regressions introduced by the compat_ioctl changes because some of the
compat updates wrongly replaced .ioctl instead of .compat_ioctl"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: compat_ioctl: cdrom: Replace .ioctl with .compat_ioctl in four appropriate places
scsi: zfcp: fix wrong data and display format of SFP+ temperature
scsi: sd_sbc: Fix sd_zbc_report_zones()
scsi: libfc: free response frame from GPN_ID
The mptcp conflict was overlapping additions.
The SMC conflict was an additional and removal happening at the same
time.
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement the ethtool hooks for the ETHTOOL_RX_COPYBREAK tunable.
The copybreak is stored into netdev_priv, so that we automatically go
back to the default value if the netdev is re-allocated.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Trust the napi_disable() in qeth_stop() to handle this.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Once the IDX connection is down, there's no point in trying to issue
more IOs.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This let's us start every new IDX connection with clean seqnos.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Looks like these were never used, ever since the driver was initially
added.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It's good practice to not blindly trust what the HW offers.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Properly define the cmd's struct to get rid of some casts and accesses
at magic offsets.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
card->info.unique_id is always 0 for IQD devices, so don't bother with
copying it into the 0-initialized cmd.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It turned out that fake numa support is rather useless on s390, since
there are no scenarios where there is any performance or other benefit
when used.
However it does provide maintenance cost and breaks from time to time.
Therefore remove it.
CONFIG_NUMA is still supported with a very small backend and only one
node. This way userspace applications which require NUMA interfaces
continue to work.
Note that NODES_SHIFT is set to 1 (= 2 nodes) instead of 0 (= 1 node),
since there is quite a bit of kernel code which assumes that more than
one node is possible if CONFIG_NUMA is enabled.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Link: https://lkml.kernel.org/r/20200221150612.GA9717@embeddedor
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
There's no need for error handling, the debugfs core is smart enough to
deal with IS_ERR() internally.
This will also keep us from creating the debugfs files if the device
directory doesn't exist. Currently (because irq_ptr->debugfs_dev gets set
to NULL on error) the files would be placed into the debugfs root - without
any association to their parent device.
On teardown, use the debugfs_remove_recursive() helper to avoid keeping
track of each created file/directory.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Don't rely on the numeric value of enum constants.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
When implementing support for retrieval of local diagnostic data from the
FCP channel, the wrong data format was assumed for the temperature of the
local SFP+ connector. The Fibre Channel Link Services (FC-LS-3)
specification is not clear on the format of the stored integer, and only
after consulting the SNIA specification SFF-8472 did we realize it is
stored as two's complement. Thus, the used data and display format is
wrong, and highly misleading for users when the temperature should drop
below 0°C (however unlikely that may be).
To fix this, change the data format in `struct fsf_qtcb_bottom_port` from
unsigned to signed, and change the printf format string used to generate
`zfcp_sysfs_adapter_diag_sfp_temperature_show()` from `%hu` to `%hd`.
Link: https://lore.kernel.org/r/d6e3be5428da5c9490cfff4df7cae868bc9f1a7e.1582039501.git.bblock@linux.ibm.com
Fixes: a10a61e807 ("scsi: zfcp: support retrieval of SFP Data via Exchange Port Data")
Fixes: 6028f7c4cd ("scsi: zfcp: introduce sysfs interface for diagnostics of local SFP transceiver")
Cc: <stable@vger.kernel.org> # 5.5+
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Fedor Loshakov <loshakov@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
- Remove ieee_emulation_warnings sysctl which is a dead code.
- Avoid triggering rebuild of the kernel during make install.
- Enable protected virtualization guest support in default configs.
- Fix cio_ignore seq_file .next function to increase position index. And
use kobj_to_dev instead of container_of in cio code.
- Fix storage block address lists to contain absolute addresses in
qdio code.
- Few clang warnings and spelling fixes.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAl5RI0sACgkQjYWKoQLX
FBig0Af/bJjFspbGFN+YEO+XM3AbURu0lHxq25r0EoSEc9acfS5nMrUk7OhNktND
w+m/PoyOg8elB3LDkalz9IP6CZANSSoGV5aKyg3Wp06Wu//DdwAMJWqFOyosJ89z
zVOSGgX3zHFarodS4suDPTEdDEcSMVVvqnz1A81dQD9QNWyVCutqYABj3OEittOD
EBYchT7Qs/ObwbP+RaUa0swbrq11P8hZSAblbjkbuFpw45CdQ6rFoyJO1Tccuyh7
puNlPLpkDI15RNxC+vh+4NItcxPcIL+Qa0kltbQJLq7aq/UqLNF02vLjWluH4hG6
i6+ZzsIra5gdtdf2cPFiKo7EagpQ2w==
=CRBt
-----END PGP SIGNATURE-----
Merge tag 's390-5.6-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Remove ieee_emulation_warnings sysctl which is a dead code.
- Avoid triggering rebuild of the kernel during make install.
- Enable protected virtualization guest support in default configs.
- Fix cio_ignore seq_file .next function to increase position index.
And use kobj_to_dev instead of container_of in cio code.
- Fix storage block address lists to contain absolute addresses in qdio
code.
- Few clang warnings and spelling fixes.
* tag 's390-5.6-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/qdio: fill SBALEs with absolute addresses
s390/qdio: fill SL with absolute addresses
s390: remove obsolete ieee_emulation_warnings
s390: make 'install' not depend on vmlinux
s390/kaslr: Fix casts in get_random
s390/mm: Explicitly compare PAGE_DEFAULT_KEY against zero in storage_key_init_range
s390/pkey/zcrypt: spelling s/crytp/crypt/
s390/cio: use kobj_to_dev() API
s390/defconfig: enable CONFIG_PROTECTED_VIRTUALIZATION_GUEST
s390/cio: cio_ignore_proc_seq_next should increase position index
Pull networking fixes from David Miller:
1) Limit xt_hashlimit hash table size to avoid OOM or hung tasks, from
Cong Wang.
2) Fix deadlock in xsk by publishing global consumer pointers when NAPI
is finished, from Magnus Karlsson.
3) Set table field properly to RT_TABLE_COMPAT when necessary, from
Jethro Beekman.
4) NLA_STRING attributes are not necessary NULL terminated, deal wiht
that in IFLA_ALT_IFNAME. From Eric Dumazet.
5) Fix checksum handling in atlantic driver, from Dmitry Bezrukov.
6) Handle mtu==0 devices properly in wireguard, from Jason A.
Donenfeld.
7) Fix several lockdep warnings in bonding, from Taehee Yoo.
8) Fix cls_flower port blocking, from Jason Baron.
9) Sanitize internal map names in libbpf, from Toke Høiland-Jørgensen.
10) Fix RDMA race in qede driver, from Michal Kalderon.
11) Fix several false lockdep warnings by adding conditions to
list_for_each_entry_rcu(), from Madhuparna Bhowmik.
12) Fix sleep in atomic in mlx5 driver, from Huy Nguyen.
13) Fix potential deadlock in bpf_map_do_batch(), from Yonghong Song.
14) Hey, variables declared in switch statement before any case
statements are not initialized. I learn something every day. Get
rids of this stuff in several parts of the networking, from Kees
Cook.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (99 commits)
bnxt_en: Issue PCIe FLR in kdump kernel to cleanup pending DMAs.
bnxt_en: Improve device shutdown method.
net: netlink: cap max groups which will be considered in netlink_bind()
net: thunderx: workaround BGX TX Underflow issue
ionic: fix fw_status read
net: disable BRIDGE_NETFILTER by default
net: macb: Properly handle phylink on at91rm9200
s390/qeth: fix off-by-one in RX copybreak check
s390/qeth: don't warn for napi with 0 budget
s390/qeth: vnicc Fix EOPNOTSUPP precedence
openvswitch: Distribute switch variables for initialization
net: ip6_gre: Distribute switch variables for initialization
net: core: Distribute switch variables for initialization
udp: rehash on disconnect
net/tls: Fix to avoid gettig invalid tls record
bpf: Fix a potential deadlock with bpf_map_do_batch
bpf: Do not grab the bucket spinlock by default on htab batch ops
ice: Wait for VF to be reset/ready before configuration
ice: Don't tell the OS that link is going down
ice: Don't reject odd values of usecs set by user
...
The RX copybreak is intended as the _max_ value where the frame's data
should be copied. So for frame_len == copybreak, don't build an SG skb.
Fixes: 4a71df5004 ("qeth: new qeth device driver")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Calling napi->poll() with 0 budget is a legitimate use by netpoll.
Fixes: a1c3ed4c9c ("qeth: NAPI support for l2 and l3 discipline")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When getting or setting VNICC parameters, the error code EOPNOTSUPP
should have precedence over EBUSY.
EBUSY is used because vnicc feature and bridgeport feature are mutually
exclusive, which is a temporary condition.
Whereas EOPNOTSUPP indicates that the HW does not support all or parts of
the vnicc feature.
This issue causes the vnicc sysfs params to show 'blocked by bridgeport'
for HW that does not support VNICC at all.
Fixes: caa1f0b10d ("s390/qeth: add VNICC enable/disable support")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove all usage of cdev->private->qdio_data that's buried deep in
internal code. This should only be used by the exported driver API,
which can then pass around a proper qdio_irq pointer.
Also trivially merge some initializations with their definitions.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Some parts use init_data->cdev, others use irq_ptr->cdev. In the end
it's all the same, but unnecessarily confusing.
Use a single reference instead.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
sbale->addr holds an absolute address (or for some FCP usage, an opaque
request ID), and should only be used with proper virt/phys translation.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
As the comment says, sl->sbal holds an absolute address. qeth currently
solves this through wild casting, while zfcp doesn't care.
Handle this properly in the code that actually builds the SL.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com> [for qdio]
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
There will come a new CCA keyblock version 2 for protected keys
delivered back to the OS. The difference is only the amount of
available buffer space to be up to 256 bytes for version 2.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The only way to reach this allocation is via
qdio_establish()
qdio_detect_hsicq()
qdio_enable_async_operation()
and since qdio_establish() uses wait_event_*() just a few lines ealier,
we can trust that it certainly is never called from atomic context.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Current code uses a 'polling' flag to keep track of whether an Input
Queue has any ACKed SBALs. QEBSM devices might have multiple ACKed
SBALs, and those are tracked separately with 'ack_count'.
By also setting ack_count for non-QEBSM devices (to a fixed value of 1),
we can use 'ack_count != 0' as replacement for the polling flag.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The internal statistic counters for the total number of
requests processed per card and per queue used integers. So they do
wrap after a rather huge amount of crypto requests processed. This
patch introduces uint64 counters which should hold much longer but
still may wrap. The sysfs attributes request_count for card and queue
also used only %ld and now display the counter value with %llu.
This is not a security relevant fix. The int overflow which happened
is not in any way exploitable as a security breach.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The pkey ioctl call PKEY_SEC2PROTK updates a struct pkey_protkey
on return. The protected key is stored in, the protected key type
is stored in but the len information was not updated. This patch
now fixes this and so the len field gets an update to refrect
the actual size of the protected key value returned.
Fixes: efc598e6c8 ("s390/zcrypt: move cca misc functions to new code file")
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reported-by: Christian Rund <RUNDC@de.ibm.com>
Suggested-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
- Add KPROBES_ON_FTRACE support.
- Add EP11 AES secure keys support.
- PAES rework and prerequisites for paes-s390 ciphers selftests.
- Fix page table upgrade for hugetlbfs.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAl465KkACgkQjYWKoQLX
FBiR/wf/e+Fj/mDYHElcZ55MWaORBpp8NT94IYSt0RbII1PEh9cB8NciYLQdFFmc
bUlNj7u3fHwk1D8S3pOSYKhIaHQQOWDqd/uNTzbCicbbVhuwmslLc+jffnORtlKe
mCHeQsVAw3NwE8FIPhPMTAKBZV0pLkM4T9PA2xgeuB5cShoMgXgLgUoIwHJ4c2TP
WwnolIJ/QR0nKpmPI5lp0+PjjSk/8nA/VvmpxgYbJCTQm8dhwhAfePh8Kf6pEp6K
wETUaIyWkX1a+kI9h2qIBsR7KplqqrKABA5sxnPDQW/kut1Pc/2fWxMOBxux0f/V
Kk+f6yoVbe7X6VYm+V4AyyAzQMRggQ==
=9Eeg
-----END PGP SIGNATURE-----
Merge tag 's390-5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Vasily Gorbik:
"The second round of s390 fixes and features for 5.6:
- Add KPROBES_ON_FTRACE support
- Add EP11 AES secure keys support
- PAES rework and prerequisites for paes-s390 ciphers selftests
- Fix page table upgrade for hugetlbfs"
* tag 's390-5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/pkey/zcrypt: Support EP11 AES secure keys
s390/zcrypt: extend EP11 card and queue sysfs attributes
s390/zcrypt: add new low level ep11 functions support file
s390/zcrypt: ep11 structs rework, export zcrypt_send_ep11_cprb
s390/zcrypt: enable card/domain autoselect on ep11 cprbs
s390/crypto: enable clear key values for paes ciphers
s390/pkey: Add support for key blob with clear key value
s390/crypto: Rework on paes implementation
s390: support KPROBES_ON_FTRACE
s390/mm: fix dynamic pagetable upgrade for hugetlbfs
Extend the low level ep11 misc functions implementation by
several functions to support EP11 key objects for paes and pkey:
- EP11 AES secure key generation
- EP11 AES secure key generation from given clear key value
- EP11 AES secure key blob check
- findcard function returns list of apqns based on given criterias
- EP11 AES secure key derive to CPACF protected key
Extend the pkey module to be able to generate and handle EP11
secure keys and also use them as base for deriving protected
keys for CPACF usage. These ioctls are extended to support
EP11 keys: PKEY_GENSECK2, PKEY_CLR2SECK2, PKEY_VERIFYKEY2,
PKEY_APQNS4K, PKEY_APQNS4KT, PKEY_KBLOB2PROTK2.
Additionally the 'clear key' token to protected key now uses
an EP11 card if the other ways (via PCKMO, via CCA) fail.
The PAES cipher implementation needed a new upper limit for
the max key size, but is now also working with EP11 keys.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
This patch introduces new sysfs attributes for EP11 cards
and queues:
An EP11 card gets four new sysfs attributes:
/sys/devices/ap/cardxx/API_ordinalnr
The EP11 card firmware API ordinal number.
/sys/devices/ap/cardxx/FW_version
The EP11 card firmware major and minor version.
/sys/devices/ap/cardxx/serialnr
Displays the serial number of the EP11 card. The serial
number is a 16 character string unique for this EP11 card.
/sys/devices/ap/cardxx/op_modes
Displays operation modes for this EP11 card. Known operation
modes are: FIPS2009, BSI2009, FIPS2011, BSI2011 and BSICC2017.
The EP11 queues get two new sysfs attributes:
/sys/devices/ap/cardxx/xx.yyyy/mkvps
Displays information about the master key(s) states and
verification patterns. Two lines are displayed:
WK CUR: <wk_cur_state> <wk_cur_vp>
WK NEW: <wk_new_state> <wk_new_vp>
with
<wk_cur_state>: 'invalid' or 'valid'
<wk_new_state>: 'empty' or 'uncommitted' or 'committed'
<wk_cur_vp> and <wk_new_vp>: '-' or a 32 byte hash pattern
/sys/devices/ap/cardxx/xx.yyyy/op_modes
Displays operation modes for this EP11 queue. Known operation
modes are: FIPS2009, BSI2009, FIPS2011, BSI2011 and BSICC2017.
The card information displayed with the sysfs attributes is fresh
fetched from the card if the card is online, otherwise cached values
are used. The queue information displayed with the sysfs attributes is
always fetched on the fly and not cached. So each read of any of these
sysfs attributes will cause an request/reply CPRB communication with
the EP11 crypto card. The queue attributes address the corresponding
EP11 domain within the EP11 card. The card attributes addresses any
domain within the EP11 card (subject to the dispatch algorithm within
the zcrypt device driver). If the addressed domain is offline or for
card addressing all domains are offline the attributes will display
'-' for state and verification patterns and an empty string for op
mode, serial number, API_ordinalnr and FW_version.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
This patch introduces two new files which provide some
low level functions to interact with EP11 crypto cards:
ep11_get_card_info() sends an EP11 query module info CPRB to the
addressed card, processes the returning reply and exposes some of
the information returned in the new ep11_card_info struct.
ep11_get_domain_info() sends an EP11 query domain info CPRB to the
addressed card/queue, processes the returning reply and exposes some
of the information returned in the new ep11_domain_info struct.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Minor rework for struct ep11_cprb and struct ep11_urb. Use of u8, u16,
u32 instead of unsigned char. Declare pointers to mem from userspace
with __user to give sparse a chance to check.
Export zcrypt_send_ep11_cprb() function as this function will be
called by code in progress which will build ep11 cprbs within the
zcrypt device driver zoo and send them to EP11 crypto cards.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
For EP11 CPRBs there was only to choose between specify
one or more ep11 targets or not give a target at all. Without
any target the zcrypt code assumed AUTOSELECT. For EP11 this
ended up in choosing any EP11 APQN with regards to the weight.
However, CCA CPRBs can have a more fine granular target
addressing. The caller can give 0xFFFF as AUTOSELECT for
the card and/or the domain. So it's possible to address
any card but domain given or any domain but card given.
This patch now introduces the very same for EP11 CPRB handling.
An EP11 target entry now may contain 0xFFFF as card and/or
domain value with the meaning of ANY card or domain. So
now the same behavior as with CCA CPRBs becomes possible:
Address any card with given domain or address any domain within
given card.
For convenience the zcrypt.h header file now has two new
defines AUTOSEL_AP and AUTOSEL_DOM covering the 0xFFFF
value to address card any and domain any.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
This patch adds support for a new key blob format to the
pkey kernel module. The new key blob comprises a clear
key value together with key type information.
The implementation tries to derive an protected key
from the blob with the clear key value inside with
1) the PCKMO instruction. This may fail as the LPAR
profile may disable this way.
2) Generate an CCA AES secure data key with exact the
clear key value. This requires to have a working
crypto card in CCA Coprocessor mode. Then derive
an protected key from the CCA AES secure key again
with the help of a working crypto card in CCA mode.
If both way fail, the transformation of the clear key
blob into a protected key will fail. For the PAES cipher
this would result in a failure at setkey() invocation.
A clear key value exposed in main memory is a security
risk. The intention of this new 'clear key blob' support
for pkey is to provide self-tests for the PAES cipher key
implementation. These known answer tests obviously need
to be run with well known key values. So with the clear
key blob format there is a way to provide knwon answer
tests together with an pkey clear key blob for the
in-kernel self tests done at cipher registration.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
qeth_l?_stop_card() is _never_ called while in HARDSETUP state, and
there's no other usage of the card state that relies on the
DOWN -> HARDSETUP -> SOFTSETUP transition.
As related cleanup, remove the check in qeth_realloc_buffer_pool() as it
is already done by the callers.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When data is received on the READ channel, the matching logic for cmds
that are waiting for a reply is currently hard-coded into the channel's
main IO callback.
Move this into a per-cmd callback, so that we can apply custom matching
logic for each individual cmd.
This also allows us to remove the coarse-grained check for unexpected
non-IPA replies, since they will no longer match against _all_ pending
cmds.
Note that IDX cmds use _no_ matcher, since their reply is synchronously
received as part of the cmd's IO.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Large parts of the online/offline code are identical now, and cleaning
up the remaining stuff is easier with a shared core.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move some duplicated logic into a shared code path.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
qeth_l2_setup_bridgeport_attrs() is entirely unrelated to sysfs
functionality, move it where it belongs.
While at it merge all the bridgeport-specific code in the set-online
path together.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch moves the reset invocation of an ap device when
fresh detected from the ap bus to the probe() function of
the driver responsible for this device.
The virtualisation of ap devices makes it necessary to
remove unconditioned resets on fresh appearing apqn devices.
It may be that such a device is already enabled for guest
usage. So there may be a race condition between host ap bus
and guest ap bus doing the reset. This patch moves the
reset from the ap bus to the zcrypt drivers. So if there
is no zcrypt driver bound to an ap device - for example
the ap device is bound to the vfio device driver - the
ap device is untouched passed to the vfio device driver.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Regression tests showed that the CCA cipher key function which
generates an CCA cipher key with given clear key value does not work
correctly. At parsing the reply CPRB two limits are wrong calculated
resulting in rejecting the reply as invalid with s390dbf message
"_ip_cprb_helper reply with invalid or unknown key block".
Fixes: f2bbc96e7c ("s390/pkey: add CCA AES cipher key support")
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
This patch corrects the SPDX License Identifier style in
header file related to S/390 common i/o drivers.
It assigns explicit block comment to the SPDX License
Identifier.
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46.
Fixes: 3cd90214b7 ("vfio: ccw: add tracepoints for interesting error paths")
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Message-Id: <20191225122054.GA4598@nishad>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Since commit f677fcb9ae ("s390/qeth: ensure linear access to packet headers"),
the CQ-specific skbs are allocated with a slightly bigger linear part
than necessary. Shrink it down to the maximum that's needed by
qeth_extract_skb().
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For non-linear packets, get the skb for attaching the page fragments
from napi_get_frags() so that it can be recycled during GRO.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To reduce the path length and levels of indirection, move the RX
processing from the sub-drivers into the core.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
I stumbled over an old OSA model that claims to support DIAG_ASSIST,
but then rejects the cmd to query its DIAG capabilities.
In the old code this was ok, as the returned raw error code was > 0.
Now that we translate the raw codes to errnos, the "rc < 0" causes us
to fail the initialization of the device.
The fix is trivial: don't bail out when the DIAG query fails. Such an
error is not critical, we can still use the device (with a slightly
reduced set of features).
Fixes: 742d4d4083 ("s390/qeth: convert remaining legacy cmd callbacks")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
During vnicc_init wanted_char should be compared to cur_char and not
to QETH_VNICC_DEFAULT. Without this patch there is no way to enforce
the default values as desired values.
Note, that it is expected, that a card comes online with default values.
This patch was tested with private card firmware.
Fixes: caa1f0b10d ("s390/qeth: add VNICC enable/disable support")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Symptom: After vnicc/rx_bcast has been manually set to 0,
bridge_* sysfs parameters can still be set or written.
Only occurs on HiperSockets, as OSA doesn't support changing rx_bcast.
Vnic characteristics and bridgeport settings are mutually exclusive.
rx_bcast defaults to 1, so manually setting it to 0 should disable
bridge_* parameters.
Instead it makes sense here to check the supported mask. If the card
does not support vnicc at all, bridge commands are always allowed.
Fixes: caa1f0b10d ("s390/qeth: add VNICC enable/disable support")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Symptom: Error message "Configuring the VNIC characteristics failed"
in dmesg whenever an OSA interface on z15 is set online.
The VNIC characteristics get re-programmed when setting a L2 device
online. This follows the selected 'wanted' characteristics - with the
exception that the INVISIBLE characteristic unconditionally gets
switched off.
For devices that don't support INVISIBLE (ie. OSA), the resulting
IO failure raises a noisy error message
("Configuring the VNIC characteristics failed").
For IQD, INVISIBLE is off by default anyways.
So don't unnecessarily special-case the INVISIBLE characteristic, and
thereby suppress the misleading error message on OSA devices.
Fixes: caa1f0b10d ("s390/qeth: add VNICC enable/disable support")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
qeth_l3_dev_hsuid_store() initially checks the card state, but doesn't
take the conf_mutex to ensure that the card stays in this state while
being reconfigured.
Rework the code to take this lock, and drop a redundant state check in a
helper function.
Fixes: b333293058 ("qeth: add support for af_iucv HiperSockets transport")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
qeth_l?_set_online() goes through a number of initialization steps, and
on any error uses qeth_l?_stop_card() to tear down the residual state.
The first initialization step is qeth_core_hardsetup_card(). When this
fails after having established a QDIO context on the device
(ie. somewhere after qeth_mpc_initialize()), qeth_l?_stop_card() doesn't
shut down this QDIO context again (since the card state hasn't
progressed from DOWN at this stage).
Even worse, we then call qdio_free() as final teardown step to free the
QDIO data structures - while some of them are still hooked into wider
QDIO infrastructure such as the IRQ list. This is inevitably followed by
use-after-frees and other nastyness.
Fix this by unconditionally calling qeth_qdio_clear_card() to shut down
the QDIO context, and also to halt/clear any pending activity on the
various IO channels.
Remove the naive attempt at handling the teardown in
qeth_mpc_initialize(), it clearly doesn't suffice and we're handling it
properly now in the wider teardown code.
Fixes: 4a71df5004 ("qeth: new qeth device driver")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----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=23d2
-----END PGP SIGNATURE-----
Merge tag 'block-5.5-20191221' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Let's try this one again, this time without the compat_ioctl changes.
We've got those fixed up, but that can go out next week.
This contains:
- block queue flush lockdep annotation (Bart)
- Type fix for bsg_queue_rq() (Bart)
- Three dasd fixes (Stefan, Jan)
- nbd deadlock fix (Mike)
- Error handling bio user map fix (Yang)
- iocost fix (Tejun)
- sbitmap waitqueue addition fix that affects the kyber IO scheduler
(David)"
* tag 'block-5.5-20191221' of git://git.kernel.dk/linux-block:
sbitmap: only queue kyber's wait callback if not already active
block: fix memleak when __blk_rq_map_user_iov() is failed
s390/dasd: fix typo in copyright statement
s390/dasd: fix memleak in path handling error case
s390/dasd/cio: Interpret ccw_device_get_mdc return value correctly
block: Fix a lockdep complaint triggered by request queue flushing
block: Fix the type of 'sts' in bsg_queue_rq()
block: end bio with BLK_STS_AGAIN in case of non-mq devs and REQ_NOWAIT
nbd: fix shutdown and recv work deadlock v2
iocost: over-budget forced IOs should schedule async delay
Pull networking fixes from David Miller:
1) Several nf_flow_table_offload fixes from Pablo Neira Ayuso,
including adding a missing ipv6 match description.
2) Several heap overflow fixes in mwifiex from qize wang and Ganapathi
Bhat.
3) Fix uninit value in bond_neigh_init(), from Eric Dumazet.
4) Fix non-ACPI probing of nxp-nci, from Stephan Gerhold.
5) Fix use after free in tipc_disc_rcv(), from Tuong Lien.
6) Enforce limit of 33 tail calls in mips and riscv JIT, from Paul
Chaignon.
7) Multicast MAC limit test is off by one in qede, from Manish Chopra.
8) Fix established socket lookup race when socket goes from
TCP_ESTABLISHED to TCP_LISTEN, because there lacks an intervening
RCU grace period. From Eric Dumazet.
9) Don't send empty SKBs from tcp_write_xmit(), also from Eric Dumazet.
10) Fix active backup transition after link failure in bonding, from
Mahesh Bandewar.
11) Avoid zero sized hash table in gtp driver, from Taehee Yoo.
12) Fix wrong interface passed to ->mac_link_up(), from Russell King.
13) Fix DSA egress flooding settings in b53, from Florian Fainelli.
14) Memory leak in gmac_setup_txqs(), from Navid Emamdoost.
15) Fix double free in dpaa2-ptp code, from Ioana Ciornei.
16) Reject invalid MTU values in stmmac, from Jose Abreu.
17) Fix refcount leak in error path of u32 classifier, from Davide
Caratti.
18) Fix regression causing iwlwifi firmware crashes on boot, from Anders
Kaseorg.
19) Fix inverted return value logic in llc2 code, from Chan Shu Tak.
20) Disable hardware GRO when XDP is attached to qede, frm Manish
Chopra.
21) Since we encode state in the low pointer bits, dst metrics must be
at least 4 byte aligned, which is not necessarily true on m68k. Add
annotations to fix this, from Geert Uytterhoeven.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (160 commits)
sfc: Include XDP packet headroom in buffer step size.
sfc: fix channel allocation with brute force
net: dst: Force 4-byte alignment of dst_metrics
selftests: pmtu: fix init mtu value in description
hv_netvsc: Fix unwanted rx_table reset
net: phy: ensure that phy IDs are correctly typed
mod_devicetable: fix PHY module format
qede: Disable hardware gro when xdp prog is installed
net: ena: fix issues in setting interrupt moderation params in ethtool
net: ena: fix default tx interrupt moderation interval
net/smc: unregister ib devices in reboot_event
net: stmmac: platform: Fix MDIO init for platforms without PHY
llc2: Fix return statement of llc_stat_ev_rx_null_dsap_xid_c (and _test_c)
net: hisilicon: Fix a BUG trigered by wrong bytes_compl
net: dsa: ksz: use common define for tag len
s390/qeth: don't return -ENOTSUPP to userspace
s390/qeth: fix promiscuous mode after reset
s390/qeth: handle error due to unsupported transport mode
cxgb4: fix refcount init for TC-MQPRIO offload
tc-testing: initial tdc selftests for cls_u32
...
ENOTSUPP is not uapi, use EOPNOTSUPP instead.
Fixes: d66cb37e96 ("qeth: Add new priority queueing options")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When managing the promiscuous mode during an RX modeset, qeth caches the
current HW state to avoid repeated programming of the same state on each
modeset.
But while tearing down a device, we forget to clear the cached state. So
when the device is later set online again, the initial RX modeset
doesn't program the promiscuous mode since we believe it is already
enabled.
Fix this by clearing the cached state in the tear-down path.
Note that for the SBP variant of promiscuous mode, this accidentally
works right now because we unconditionally restore the SBP role while
re-initializing.
Fixes: 4a71df5004 ("qeth: new qeth device driver")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Along with z/VM NICs, there's additional device types that only support
a specific transport mode (eg. external-bridged IQD).
Identify the corresponding error code, and raise a fitting error message
so that the user knows to adjust their device configuration.
On top of that also fix the subsequent error path, so that the rejected
cmd doesn't need to wait for a timeout but gets cancelled straight away.
Fixes: 4a71df5004 ("qeth: new qeth device driver")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
coypright -> copyright
Reported-by: Kate Stewart <kstewart@linuxfoundation.org>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If for whatever reason the dasd_eckd_check_characteristics() function
exits after at least some paths have their configuration data
allocated those data is never freed again. In the error case the
device->private pointer is set to NULL and dasd_eckd_uncheck_device()
will exit without freeing the path data because of this NULL pointer.
Fix by calling dasd_eckd_clear_conf_data() for error cases.
Also use dasd_eckd_clear_conf_data() in dasd_eckd_uncheck_device()
to avoid code duplication.
Reported-by: Qian Cai <cai@lca.pw>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The max data count (mdc) is an unsigned 16-bit integer value as per AR
documentation and is received via ccw_device_get_mdc() for a specific
path mask from the CIO layer. The function itself also always returns a
positive mdc value or 0 in case mdc isn't supported or couldn't be
determined.
Though, the comment for this function describes a negative return value
to indicate failures.
As a result, the DASD device driver interprets the return value of
ccw_device_get_mdc() incorrectly. The error case is essentially a dead
code path.
To fix this behaviour, check explicitly for a return value of 0 and
change the comment for ccw_device_get_mdc() accordingly.
This fix merely enables the error code path in the DASD functions
get_fcx_max_data() and verify_fcx_max_data(). The actual functionality
stays the same and is still correct.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
qeth_qdio_start_poll() is called from the qdio layer's IRQ handler,
while IRQs are masked.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann