Tie in r8a7795 features and update the IOMMU_OF_DECLARE
compat string to include the updated compat string.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Introduce support for two bit SL0 bitfield in IMTTBCR
by using a separate feature flag.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Introduce a feature to allow opt-out of setting up
IMBUSCR. The default case is unchanged.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Write IMCTR both in the root device and the leaf node.
To allow access of IMCTR introduce the following function:
- ipmmu_ctx_write_all()
While at it also rename context functions:
- ipmmu_ctx_read() -> ipmmu_ctx_read_root()
- ipmmu_ctx_write() -> ipmmu_ctx_write_root()
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The r8a7795 IPMMU supports 40-bit bus mastering. Both
the coherent DMA mask and the streaming DMA mask are
set to unlock the 40-bit address space for coherent
allocations and streaming operations.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Hook up IOMMU_OF_DECLARE() support in case CONFIG_IOMMU_DMA
is enabled. The only current supported case for 32-bit ARM
is disabled, however for 64-bit ARM usage of OF is required.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Add support for up to 8 contexts. Each context is mapped to one
domain. One domain is assigned one or more slave devices. Contexts
are allocated dynamically and slave devices are grouped together
based on which IPMMU device they are connected to. This makes slave
devices tied to the same IPMMU device share the same IOVA space.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Add root device handling to the IPMMU driver by allowing certain
DT compat strings to enable has_cache_leaf_nodes that in turn will
support both root devices with interrupts and leaf devices that
face the actual IPMMU consumer devices.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Introduce struct ipmmu_features to track various hardware
and software implementation changes inside the driver for
different kinds of IPMMU hardware. Add use_ns_alias_offset
as a first example of a feature to control if the secure
register bank offset should be used or not.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The remaining difference between the ARM-specific and iommu-dma ops is
in the {add,remove}_device implementations, but even those have some
overlap and duplication. By stubbing out the few arm_iommu_*() calls,
we can get rid of the rest of the inline #ifdeffery to both simplify the
code and improve build coverage.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Now that the IPMMU instance pointer is the only thing remaining in the
private data structure, we no longer need the extra level of indirection
and can simply stash that directlty in the fwspec.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
We go through quite the merry dance in order to find masters behind the
same IPMMU instance, so that we can ensure they are grouped together.
None of which is really necessary, since the master's private data
already points to the particular IPMMU it is associated with, and that
IPMMU instance data is the perfect place to keep track of a per-instance
group directly.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
We have two implementations for ipmmu_ops->alloc depending on
CONFIG_IOMMU_DMA, the difference being whether they accept the
IOMMU_DOMAIN_DMA type or not. However, iommu_dma_get_cookie() is
guaranteed to return an error when !CONFIG_IOMMU_DMA, so if
ipmmu_domain_alloc_dma() was actually checking and handling the return
value correctly, it would behave the same as ipmmu_domain_alloc()
anyway.
Similarly for freeing; iommu_put_dma_cookie() is robust by design.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
In case of error, the function iommu_group_get() returns NULL pointer
not ERR_PTR(). The IS_ERR() test in the return value check should be
replaced with NULL test.
Fixes: 3ae4729202 ("iommu/ipmmu-vmsa: Add new IOMMU_DOMAIN_DMA ops")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Now that the core API issues its own post-unmap TLB sync call, push that
operation out from the io-pgtable-arm internals into the users. For now,
we leave the invalidation implicit in the unmap operation, since none of
the current users would benefit much from any change to that.
CC: Magnus Damm <damm+renesas@opensource.se>
CC: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Reserving a free context is both quicker and more likely to fail
(due to limited hardware resources) than setting up a pagetable.
What is more the pagetable init/cleanup code could require
the context to be set up.
Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
CC: Robin Murphy <robin.murphy@arm.com>
CC: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
CC: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Extend the driver to make use of iommu_device_sysfs_add()/remove()
functions to hook up initial sysfs support.
Suggested-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Get rid of now unused device tracking code. Future code should instead
be able to use driver_for_each_device() for this purpose.
This is a simplified version of the following patch from Robin
[PATCH] iommu/ipmmu-vmsa: Clean up group allocation
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Now when both 32-bit and 64-bit code inside the driver is using
fwspec it is possible to replace the utlb handling with fwspec ids
that get populated from ->of_xlate().
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Consolidate the 32-bit and 64-bit code to make use of fwspec instead
of archdata for the 32-bit ARM case.
This is a simplified version of the fwspec handling code from Robin
posted as [PATCH] iommu/ipmmu-vmsa: Convert to iommu_fwspec
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The 32-bit ARM code gets updated to make use of ->of_xlate() and the
code is shared between 64-bit and 32-bit ARM. The of_device_is_available()
check gets dropped since it is included in of_iommu_xlate().
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Extend the driver to make use of iommu_device_register()/unregister()
functions together with iommu_device_set_ops() and iommu_set_fwnode().
These used to be part of the earlier posted 64-bit ARM (r8a7795) series but
it turns out that these days they are required on 32-bit ARM as well.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Fix comma-instead-of-semicolon typo error present
in the latest version of the IPMMU driver.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Convert from archdata to iommu_priv via iommu_fwspec on ARM64 but
let 32-bit ARM keep on using archdata for now.
Once the 32-bit ARM code and the IPMMU driver is able to move over
to CONFIG_IOMMU_DMA=y then coverting to fwspec via ->of_xlate() will
be easy.
For now fwspec ids and num_ids are not used to allow code sharing between
32-bit and 64-bit ARM code inside the driver.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Introduce an alternative set of iommu_ops suitable for 64-bit ARM
as well as 32-bit ARM when CONFIG_IOMMU_DMA=y. Also adjust the
Kconfig to depend on ARM or IOMMU_DMA. Initialize the device
from ->xlate() when CONFIG_IOMMU_DMA=y.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Break out the domain allocation code into a separate function.
This is preparation for future code sharing.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Reviewed-by: Joerg Roedel <jroedel@suse.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Break out the utlb parsing code and dev_data allocation into a
separate function. This is preparation for future code sharing.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Reviewed-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Introduce a bitmap for context handing and convert the
interrupt routine to handle all registered contexts.
At this point the number of contexts are still limited.
Also remove the use of the ARM specific mapping variable
from ipmmu_irq() to allow compile on ARM64.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Reviewed-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The IPMMU driver is using DT these days, and platform data is no longer
used by the driver. Remove unused code.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Joerg Roedel <jroedel@suse.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Currently, the IPMMU/VMSA driver supports 32-bit I/O Virtual Addresses
only, and thus sets io_pgtable_cfg.ias = 32. However, it doesn't force
a 32-bit IOVA space through the IOMMU Domain Geometry.
Hence if a device (e.g. SYS-DMAC) rightfully configures a 40-bit DMA
mask, it will still be handed out a 40-bit IOVA, outside the 32-bit IOVA
space, leading to out-of-bounds accesses of the PGD when mapping the
IOVA.
Force a 32-bit IOMMU Domain Geometry to fix this.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Let's fix the error handle of ipmmu_add_device
when failing to find utlbs, otherwise we take a
risk of pontential memleak.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
If CONFIG_PHYS_ADDR_T_64BIT=n:
drivers/iommu/ipmmu-vmsa.c: In function 'ipmmu_domain_init_context':
drivers/iommu/ipmmu-vmsa.c:434:2: warning: right shift count >= width of type
ipmmu_ctx_write(domain, IMTTUBR0, ttbr >> 32);
^
As io_pgtable_cfg.arm_lpae_s1_cfg.ttbr[] is an array of u64s, assigning
it to a phys_addr_t may truncates it. Make ttbr u64 to fix this.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
IOMMU hardware with range-based TLB maintenance commands can work
happily with the iova and size arguments passed via the tlb_add_flush
callback, but for IOMMUs which require separate commands per entry in
the range, it is not straightforward to infer the necessary granularity
when it comes to issuing the actual commands.
Add an additional argument indicating the granularity for the benefit
of drivers needing to know, and update the ARM LPAE code appropriately
(for non-leaf invalidations we currently just assume the worst-case
page granularity rather than walking the table to check).
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
With the correct DMA API calls now integrated into the io-pgtable code,
let that handle the flushing of non-coherent page table updates.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The of_device_id table is supposed to be zero-terminated.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When adding a new device the driver loops over all registered IOMMUs and
calls the ipmmu_find_utlbs() function to parse the DT iommus attribute.
The function returns an error when the IOMMU referenced in DT doesn't
match the current IOMMU. The caller incorrectly breaks from the loop
immediately when the error is reported, resulting in only the first
IOMMU being considered.
Fix this, and while at it move code that isn't specific to an IOMMU
instance out of the loop.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Replace the custom page table allocation implementation with the
standard allocator.
The driver loses the ability to map 64kB chunkgs using the PTE
contiguous hint, hence the removal of the SZ_64K page size from the
IOMMU page sizes bitmap.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
No board file instantiates the IPMMU using platform data. Now that we
have DT support, get rid of platform data.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Devices such as the system DMA controller are connected to multiple
micro TLBs of the same IOMMU. Support this.
Selective enabling of micro TLBs based on runtime device usage isn't
possible at the moment due to lack of support in the IOMMU and DMA
mapping APIs. Support for devices connected to different IOMMUs is also
unsupported for the same reason.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Make platform data optional when the device is instantiated from DT and
look up the micro-TLB number in the bus master DT node.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The TLB must be invalidated after unmapping memory to remove stale TLB
entries. this was supposed to be performed already, but a bug in the
driver prevented the TLB invalidate function from being called. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
When clearing PUD or PMD entries the child page table (if any) is freed
and the PUD or PMD entry is then cleared. This result in a small race
condition window during which a free page table could be accessed by the
IPMMU.
Fix it by clearing and flushing the PUD or PMD entry before freeing the
child page table.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The ARM IOMMU mapping needs to be released when attaching the device
fails. Add arm_iommu_release_mapping() to the error code path. This is
safe to call with a NULL mapping, so no specific check is needed.
Cleanup is also missing when failing to create a mapping. Jump to the
error code path in that case instead of returning immediately.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Commit a720b41c41 ("iommu/arm-smmu: change IOMMU_EXEC to
IOMMU_NOEXEC") has inverted and replaced the IOMMU_EXEC flag with
IOMMU_NOEXEC. Update the driver accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Here's the set of driver core patches for 3.19-rc1.
They are dominated by the removal of the .owner field in platform
drivers. They touch a lot of files, but they are "simple" changes, just
removing a line in a structure.
Other than that, a few minor driver core and debugfs changes. There are
some ath9k patches coming in through this tree that have been acked by
the wireless maintainers as they relied on the debugfs changes.
Everything has been in linux-next for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlSOD20ACgkQMUfUDdst+ylLPACg2QrW1oHhdTMT9WI8jihlHVRM
53kAoLeteByQ3iVwWurwwseRPiWa8+MI
=OVRS
-----END PGP SIGNATURE-----
Merge tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core update from Greg KH:
"Here's the set of driver core patches for 3.19-rc1.
They are dominated by the removal of the .owner field in platform
drivers. They touch a lot of files, but they are "simple" changes,
just removing a line in a structure.
Other than that, a few minor driver core and debugfs changes. There
are some ath9k patches coming in through this tree that have been
acked by the wireless maintainers as they relied on the debugfs
changes.
Everything has been in linux-next for a while"
* tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits)
Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries"
fs: debugfs: add forward declaration for struct device type
firmware class: Deletion of an unnecessary check before the function call "vunmap"
firmware loader: fix hung task warning dump
devcoredump: provide a one-way disable function
device: Add dev_<level>_once variants
ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries
ath: use seq_file api for ath9k debugfs files
debugfs: add helper function to create device related seq_file
drivers/base: cacheinfo: remove noisy error boot message
Revert "core: platform: add warning if driver has no owner"
drivers: base: support cpu cache information interface to userspace via sysfs
drivers: base: add cpu_device_create to support per-cpu devices
topology: replace custom attribute macros with standard DEVICE_ATTR*
cpumask: factor out show_cpumap into separate helper function
driver core: Fix unbalanced device reference in drivers_probe
driver core: fix race with userland in device_add()
sysfs/kernfs: make read requests on pre-alloc files use the buffer.
sysfs/kernfs: allow attributes to request write buffer be pre-allocated.
fs: sysfs: return EGBIG on write if offset is larger than file size
...
Magnus Damm