Dave Jones, in his blog, had some feedback about the bootchart script:
Primarily his complaint was that shorter delays weren't visualized.
The reason for that was that too small delays will have their labels
mixed up in the graph in an unreadable mess.
This patch has a fix for this; for one, it makes the output wider,
so more will fit.
The second part is that smaller delays are now shown with a
much smaller font for the label; while this isn't per se
readable at a 1:1 zoom, at least you can zoom in with most SVG
viewing applications and see what it is you are looking at.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Rafael reported:
I get the following error from 'make modules_install' on my test boxes:
HOSTCC firmware/ihex2fw
/home/rafael/src/linux-2.6/firmware/ihex2fw.c:268: fatal error: opening dependency file firmware/.ihex2fw.d: Read-only file system
compilation terminated.
make[3]: *** [firmware/ihex2fw] Error 1
make[2]: *** [_modinst_post] Error 2
make[1]: *** [sub-make] Error 2
make: *** [all] Error 2
where the configuration is that the kernel is compiled on a build box
with 'make O=<destdir> -j5' and then <destdir> is mounted over NFS read-only by
each test box (full path to this directory is the same on the build box and on
the test boxes). Then, I cd into <destdir>, run 'make modules_install' and get
the error above.
The issue turns out to be that we when we install firmware pick
up the list of firmware blobs from firmware/Makefile.
And this triggers the Makefile rules to update ihex2fw.
There were two solutions for this issue:
1) Move the list of firmware blobs to a separate file
2) Avoid ihex2fw rebuild by moving it to scripts
As I seriously beleive that the list of firmware blobs should be
done in a fundamental different way solution 2) was selected.
Reported-and-tested-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Impact: Resolves build failures in some configurations
Makes it possible to disable CONFIG_RD_GZIP . In that case, the
built-in initramfs will be compressed by whatever compressor is
available (bzip2 or lzma) or left uncompressed if none is available.
It also removes a couple of warnings which occur when no ramdisk
compression at all is chosen.
It also restores the select ZLIB_INFLATE in drivers/block/Kconfig
which somehow came missing. This is needed to activate compilation of
the stuff in zlib_deflate.
Signed-off-by: Alain Knaff <alain@knaff.lu>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Clean up checkpatch using perlcritic.
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In the general use case struct file_operations should be a const object.
Check for and warn where it is not. As suggested by Steven and Ingo.
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When checking for assignments within if conditionals we check the whole of
the condition, but the match is performed using a line constrained regular
expression. This means we can miss split conditionals or those on the
second line. Allow the check to span lines.
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ensure we do not report identifiers containing the word static as static
declarations. For example this should not be reported as an unecessary
assignement of 0:
long nr_static = 0;
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When picking up a complete statement or block for analysis we cannot
simply track open/close/etc parenthesis we must take into account
preprocessor section boundaries.
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We are miscategorising a continuation fragment following an operator
which may lead to us thinking that there is a space after it when there is
not. Fix this up.
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Loosen spacing checks to correctly detect this valid use of a typedef:
typedef struct rcu_data *(*get_data_func)(int);
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Seems like every other release we have someone who updates vmlinux.lds.h
and adds C-visible symbols without VMLINUX_SYMBOL() around them. So start
checking the file and reject assignments which have plain symbols on
either side.
[apw@canonical.com: soften the check, add tests]
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It seems to be a common idiom to include braces on conditionals in all
contexts including return. Allow this exception to the return is not a
function checks. Reported by Kay Sievers.
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some people work internally with -p0-patches which has the danger that one
forgets to convert them to -p1 before mainlining. Bitten myself and seen
p0-patches in mailing lists occasionally, this patch adds a warning to
checkpatch.pl in case a patch is -p0. If you really want, you can fool
this check to generate false positives, this is why it just spits a
warning. Making the check 100% proof is trickier than it looks, so let's
start with a version which catches the cases of real use.
[apw@canonical.com: update message language, handle null prefix, add tests]
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Disallow spaces within multiple pointer stars (*) in both casts and
definitions. Both of these would now be reported:
(char * *)
char * *foo;
Also now consistently detects and reports the attributes within these
structures making the error report itself clearer.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When we are detecting whether a comment is open when we start a hunk we
check for the first comment edge in the hunk and assume its inverse.
However if the hunk contains something like below, then we will assume
that a comment was open. Update this heuristic to see if the comment edge
is obviously within double quotes and ignore it if so:
foo(" */);
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Detect the colons (:) which make up secondary bitfield declarations and
apply binary colon checks. For example the following is common idiom:
int foo:1,
bar:1;
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add __weak as an official attribute. This tends to be used in a location
where the automated attribute detector misses it.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ensure we do not trigger the complex macros checks on structure member
assignment, for example:
#define foo .bar = 10
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some people use double star '**' as a comment continuation, and start
comments with complete lines of stars. Widen the implied comment
detection to pick these up.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When detecting implied comments from leading stars we may incorrectly
think we have detected an edge one way or the other when we have not if we
drop off the end of the last hunk. Fix this up.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
in_atomic() is not for driver use so report any such use as an ERROR.
Also in_atomic() is often used to determine if we may sleep, but it is not
reliable in this use model therefore strongly discourage its use.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We're struggling all the time to figure out where the code came from that
oopsed.. The script below (a adaption from a script used by
kerneloops.org) can help developers quite a bit, at least for non-module
cases.
It works and looks like this:
[/home/arjan/linux]$ dmesg | perl scripts/markup_oops.pl vmlinux
{
struct agp_memory *memory;
memory = agp_allocate_memory(agp_bridge, pg_count, type);
c055c10f: 89 c2 mov %eax,%edx
if (memory == NULL)
c055c111: 74 19 je c055c12c <agp_allocate_memory_wrap+0x30>
/* This function must only be called when current_controller != NULL */
static void agp_insert_into_pool(struct agp_memory * temp)
{
struct agp_memory *prev;
prev = agp_fe.current_controller->pool;
c055c113: a1 ec dc 8f c0 mov 0xc08fdcec,%eax
*c055c118: 8b 40 10 mov 0x10(%eax),%eax <----- faulting instruction
if (prev != NULL) {
c055c11b: 85 c0 test %eax,%eax
c055c11d: 74 05 je c055c124 <agp_allocate_memory_wrap+0x28>
prev->prev = temp;
c055c11f: 89 50 04 mov %edx,0x4(%eax)
temp->next = prev;
c055c122: 89 02 mov %eax,(%edx)
}
agp_fe.current_controller->pool = temp;
c055c124: a1 ec dc 8f c0 mov 0xc08fdcec,%eax
c055c129: 89 50 10 mov %edx,0x10(%eax)
if (memory == NULL)
return NULL;
agp_insert_into_pool(memory);
so in this case, we faulted while dereferencing agp_fe.current_controller
pointer, and we get to see exactly which function and line it affects...
Personally I find this very useful, and I can see value for having this
script in the kernel for more-than-just-me to use.
Caveats:
* It only works for oopses not-in-modules
* It only works nicely for kernels compiled with CONFIG_DEBUG_INFO
* It's not very fast.
* It only works on x86
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Impact: Bug fix
If bzip2 or lzma fails (for example, if they aren't installed on the
system), we need to propagate the failure out to "make". However,
they were masked by being followed by a semicolon.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Impact: Replaces inflate.c with a wrapper around zlib_inflate; new library code
This is the first part of the bzip2/lzma patch
The bzip patch is based on an idea by Christian Ludwig, includes support for
compressing the kernel with bzip2 or lzma rather than gzip. Both
compressors give smaller sizes than gzip. Lzma's decompresses faster
than bzip2.
It also supports ramdisks and initramfs' compressed using these two
compressors.
The functionality has been successfully used for a couple of years by
the udpcast project
This version applies to "tip" kernel 2.6.28
This part contains:
- changed inflate.c to accomodate rest of patch
- implementation of bzip2 compression (not used at this stage yet)
- implementation of lzma compression (not used at this stage yet)
- Makefile routines to support bzip2 and lzma kernel compression
Signed-off-by: Alain Knaff <alain@knaff.lu>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
The new check for asm/types.h and linux/types.h had
a few false positives.
o We cannot let linux/types.h include linux/types.h
o The int-ll64.h and int-ll64.h define the types
and are included by linux/types.h
Handle this by hardcoding the filenames in the headers_check script.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
If we see __[us](8|16|32|64) then we must include <linux/types.h>
If wee see include of <asm/types.h> then we recommend <linux/types.h>
Original script from Mike but modified by me.
Cc: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Headers in userspace should be using the __xxx__ form of the asm, inline,
and volatile keywords. Since people like to revert these things without
realizing what's going on, have the headers install step autoconvert these
keywords.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Since prototypes with "extern" refer to kernel functions, they make no
sense in userspace, so reject them automatically.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
[sam: made it into a warning]
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
We now say where we detect the second source of a file,
and where we detect a recursively source of the same file.
This makes it easier to fix such errors.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-next: (25 commits)
allow stripping of generated symbols under CONFIG_KALLSYMS_ALL
kbuild: strip generated symbols from *.ko
kbuild: simplify use of genksyms
kernel-doc: check for extra kernel-doc notations
kbuild: add headerdep used to detect inclusion cycles in header files
kbuild: fix string equality testing in tags.sh
kbuild: fix make tags/cscope
kbuild: fix make incompatibility
kbuild: remove TAR_IGNORE
setlocalversion: add git-svn support
setlocalversion: print correct subversion revision
scripts: improve the decodecode script
scripts/package: allow custom options to rpm
genksyms: allow to ignore symbol checksum changes
genksyms: track symbol checksum changes
tags and cscope support really belongs in a shell script
kconfig: fix options to check-lxdialog.sh
kbuild: gen_init_cpio expands shell variables in file names
remove bashisms from scripts/extract-ikconfig
kbuild: teach mkmakfile to be silent
...
Building upon parts of the module stripping patch, this patch
introduces similar stripping for vmlinux when CONFIG_KALLSYMS_ALL=y.
Using CONFIG_KALLSYMS_STRIP_GENERATED reduces the overhead of
CONFIG_KALLSYMS_ALL from 245k/310k to 65k/80k for the (i386/x86-64)
kernels I tested with.
The patch also does away with the need to special case the kallsyms-
internal symbols by making them available even in the first linking
stage.
While it is a generated file, the patch includes the changes to
scripts/genksyms/keywords.c_shipped, as I'm unsure what the procedure
here is.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
This patch changes the way __crc_ symbols are being resolved from
using ld to do so to using the assembler, thus allowing these symbols
to be marked local (the linker creates then as global ones) and hence
allow stripping (for modules) or ignoring (for vmlinux) them. While at
this, also strip other generated symbols during module installation.
One potentially debatable point is the handling of the flags passeed
to gcc when translating the intermediate assembly file into an object:
passing $(c_flags) unchanged doesn't work as gcc passes --gdwarf2 to
gas whenever is sees any -g* option, even for -g0, and despite the
fact that the compiler would have already produced all necessary debug
info in the C->assembly translation phase. I took the approach of just
filtering out all -g* options, but an alternative to such negative
filtering might be to have a positive filter which might, in the ideal
case allow just all the -Wa,* options to pass through.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Add functionality to check for function parameters or structure (or
union/typedef/enum) field members that are described in kernel-doc but
are not part of the expected (declared) parameters or structure.
These generate warnings that are called "Excess" descriptions.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
- fix combining O=... and tags
- don't allow * expansion during sh function calls
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
[sam: use KBUILD_SRC to check if we use O=...]
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Impact: let the function-graph-tracer be aware of the irq entrypoints
Add a new .irqentry.text section to store the irq entrypoints functions
inside the same section. This way, the tracer will be able to signal
an interrupts triggering on output by recognizing these entrypoints.
Also, make this section recordable for dynamic tracing.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Given that there is no usage of a TAR_IGNORE variable remove it
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Print svn revision in addition to git info on git-svn repos.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Output svn revision of latest change, instead of repo revision as thats
what we're interested in (especially when working on a branch/tag).
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
kerneloops.org has been using an improved "decodecode" script,
specifically it has a special marker that shows which line in the assembly
the oops happened at, like this:
20: 83 e0 03 and $0x3,%eax
23: 09 d8 or %ebx,%eax
25: 85 db test %ebx,%ebx
27: 89 02 mov %eax,(%edx)
29: 74 0f je 0x3a
2b:* 3b 73 04 cmp 0x4(%ebx),%esi <-- trapping instruction
2e: 75 05 jne 0x35
30: 89 53 04 mov %edx,0x4(%ebx)
33: eb 07 jmp 0x3c
35: 89 53 08 mov %edx,0x8(%ebx)
this patch updates the kernel copy to also have this functionality.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Reviewed-by: WANG Cong <wangcong@zeuux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Add a RPMOPTS make variable to allow arbitrary options to be passed
to rpm during 'make rpm-pkg'. For example:
make RPMOPTS="--define '_topdir /home/jk/rpm'" rpm-pkg
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
This adds an "override" keyword for use in *.symvers / *.symref files.
When a symbol is overridden, the symbol's old definition will be used for
computing checksums instead of the new one, preserving the previous
checksum. (Genksyms will still warn about the change.)
This is meant to allow distributions to hide minor actual as well as fake
ABI changes. (For example, when extra type information becomes available
because additional headers are included, this may change checksums even
though none of the types used have actully changed.)
This approach also allows to get rid of "#ifdef __GENKSYMS__" hacks in the
code, which are currently used in some vendor kernels to work around
checksum changes.
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Sometimes it is preferable to avoid changes of exported symbol checksums
(to avoid breaking externally provided modules). When a checksum change
occurs, it can be hard to figure out what caused this change: underlying
types may have changed, or additional type information may simply have
become available at the point where a symbol is exported.
Add a new --reference option to genksyms which allows it to report why
checksums change, based on the type information dumps it creates with the
--dump-types flag. Genksyms will read in such a dump from a previous run,
and report which symbols have changed (and why).
The behavior can be controlled for an entire build as follows: If
KBUILD_SYMTYPES is set, genksyms uses --dump-types to produce *.symtypes
dump files. If any *.symref files exist, those will be used as the
reference to check against. If KBUILD_PRESERVE is set, checksum changes
will fail the build.
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
as they do not benefit from the make functionality.
Moving the support to a shell script has several benefits:
- The readability of the code has increased a lot
- More people is able to extend the tags support
- We see less changes to the top-level Makefile
The shell script version includes improvements from:
Alexey Dobriyan <adobriyan@gmail.com> (jump to kconfig symbols)
Alexey Dobriyan <adobriyan@gmail.com> (drop ./ in paths)
Ian Campbell <ijc@hellion.org.uk> (simplified find algorithms)
This version has a few caveats:
=> It does not support ALLSOURCE_ARCHS
- it is easy to add if it is really used
=> It assumes all archs have moved to arch/$ARCH/include
- until that happens we have a few additional hits in the archs
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Tested-by: Ian Campbell <ijc@hellion.org.uk>
unbashify-extract-ikconfig.patch
scripts/extract-ikconfig contains a lot of gratuituous bashisms,
which make it fail if /bin/sh isn't bash. This patch replaces them
with regular Bourne shell constructs.
Signed-off-by: Werner Almesberger <werner@openmoko.org>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com> # as file author
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Convert a few echos in the build system to new $(kecho) so we get correct
output according to build verbosity.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
[sam: added kecho in a few more places for O=... builds]
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
There is a bunch of places in the build system where we do 'echo' to show
some nice status lines. This means we still get output when running in
silent mode. So declare a new KECHO variable that only does 'echo' when we
are in a suitable verbose build mode.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
[sam: added Documentation]
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
The mkcompile_h script does `echo` regardless of silent mode the make is
running at, so have it respect $quiet from kbuild and only echo when not in
silent mode.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
kbuild failed to expand include flags in KBUILD_CPPFLAGS
resulting in code like this in arch Makefiles:
ifeq ($(KBUILD_SRC),)
KBUILD_CPPFLAGS += -Iinclude/foo
else
KBUILD_CPPFLAGS += -I$(srctree)/include/foo
endif
Move use of LINUXINCLUDE into Makefile.lib to allow
us to expand -I directives of KBUILD_CPPFLAGS so
we can avoid the above code.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
When adding extra -I options with O=... we could
end up in a situation where there were no parameters to -I.
So we had a commandline that looked like this:
... -I -Wall ...
This had the undesired side effect that gcc assumed "-Wall"
was a path to look for include files so this options was
effectively ignored.
This happens only when we build the generated module.mod.c files
as part of the final modules builds and is as such harmless
with current kbuild.
This bug was exposed when we rearranged the options to gcc.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
The method for listing varargs in kernel-doc notation is:
* @...: these arguments are printed by the @fmt argument
but scripts/kernel-doc is confused: it always lists varargs as:
... variable arguments
and ignores the @...: line's description, but then prints that
line after the list of function parameters as though it's
not part of the function parameters.
This patch makes kernel-doc print the supplied @... description if it is
present; otherwise a boilerplate "variable arguments" is printed.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Impact: new "power-tracer" ftrace plugin
This patch adds a C/P-state ftrace plugin that will generate
detailed statistics about the C/P-states that are being used,
so that we can look at detailed decisions that the C/P-state
code is making, rather than the too high level "average"
that we have today.
An example way of using this is:
mount -t debugfs none /sys/kernel/debug
echo cstate > /sys/kernel/debug/tracing/current_tracer
echo 1 > /sys/kernel/debug/tracing/tracing_enabled
sleep 1
echo 0 > /sys/kernel/debug/tracing/tracing_enabled
cat /sys/kernel/debug/tracing/trace | perl scripts/trace/cstate.pl > out.svg
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: widen the scope of recordmcount.pl
Besides .text section, there are three .text sections that won't
be freed after kernel booting. They are: .sched.text, .spinlock.text
and .kprobes.text, which contain functions we can trace. But the last
section ".kprobes.text" is particular, which has been marked as "notrace",
we ignore it. Thus we add other two sections.
Signed-off-by: Liming Wang <liming.wang@windriver.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: extend scripts/recordmcount.pl to ARM
Arm uses %progbits instead of @progbits and requires only 4 byte alignment.
[ Thanks to Sam Ravnborg for mentioning that ARM uses %progbits ]
Signed-off-by: Jim Radford <radford@galvanix.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: extend scripts/recordmcount.pl with default alignment for SH
Set $alignment=2 for the sh architecture so that a ".align 2" directive
will be emitted for all __mcount_loc sections. Fix a whitspace error
while I'm here (converted spaces to tabs).
Signed-off-by: Matt Fleming <mjf@gentoo.org>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup of recordmcount.pl
Now that more architectures are being ported to the MCOUNT_RECORD
method, there is no reason to have each declare their own arch
specific variable if most of them share the same value. This patch
creates a set of default values for the arch specific variables
based off of i386.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: Add PowerPC port to recordmcount.pl script
This patch updates the recordmcount.pl script to process
PowerPC.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
First cut at dynamic ftrace support.
[
Steven Rostedt - only updated the recordmcount.pl file.
There are updates for PowerPC that will conflict with this,
and we need to base off of these changes.
]
Signed-off-by: Matt Fleming <mjf@gentoo.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Since this scripts output is usually redirected, put error messages
on standard error and exit with error code if no data is found.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
Fix the following warning from the perl syntax checking tool perlcritic.
This tool is a lint like tool that checks for perl best practices.
Loop iterator is not lexical at line 113, column 1.
See page 108 of PBP. (Severity: 5)
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The below is a simplistic fix for "make deb-pkg"; it splits the
firmware out to a linux-firmware-image package and adds an
(unversioned) Suggests to the linux package for this firmware.
Signed-Off-By: Jonathan McDowell <noodles@earth.li>
Acked-by: Frans Pop <elendil@planet.nl>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Impact: add alignment option for recordmcount.pl script
Align the __mcount_loc sections so that architectures with strict
alignment requirements need not worry about performing unaligned
accesses.
This fixes an issue where I was seeing unaligned accesses, which are not
supported on our architecture (the results of an unaligned access are
undefined).
Signed-off-by: Matt Fleming <matthew.fleming@imgtec.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
Sam Ravnborg pointed out that I could condense the code for the parameters of
recordmcount.pl by using an $(if ...) condition.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Fix headers_install.pl and headers_check.pl to be compatible with versions
of Perl less than 5.6.0. It has been tested with Perl 5.005_03 and 5.8.8.
I realize this may not be an issue for most people, but there will still
be some that hit it, I imagine. There are three basic issues:
1. Prior to 5.6.0 open() only used 2 arguments, and the versions of
the scripts in 2.6.27.1 use 3.
2. 5.6.0 also introduced the ability to use uninitialized scalar
variables as file handles, which the current scripts make use of.
3. Lastly, 5.6.0 also introduced the pragma 'use warnings'. We can use
the -w switch and be backwards compatible.
Signed-off-by: Jeremy Huntwork <jhuntwork@lightcubesolutions.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
setlocalversion used to use an abbreviated git commit sha1 to generate the
tag. This was changed in commit d882421f4e
"kbuild: change CONFIG_LOCALVERSION_AUTO to use a git-describe-ish format"
to use git describe to come up with a tag. Which is nice, but git describe
sometimes can't describe the revision.
Commit 56b2f0706d ("setlocalversion: do not
describe if there is nothing to describe") addressed this, but there is still
no tag generated.
So, generate a plain abbreviated sha1 tag like setlocalversion used to when
git describe comes up short.
Signed-off-by: Trent Piepho <tpiepho@freescale.com>
CC: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
This fixes a compile time warning which occurs whenever a static library
is linked into a kernel module. MODPOST tries to look for a
".<modulename>.cmd" file to look for its dependencies, but that file
doesn't exist or get generated for static libraries.
This patch prevents modpost from looking for a .cmd file when a module is
linked with a static library
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Ashutosh Naik <ashutosh.naik@gmail.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Taken from http://bugzilla.kernel.org/show_bug.cgi?id=11567
If you even define KBUILD_EXTRA_SYMBOLS in Makefile it will not be expanded
into command line argument for modpost.
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Make the checksyscalls script work even on systems where sed is non-gnu.
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Currently, if we do a 'make rpm-pkg' without the _smp_mflags rpm macro
defined, the build fails with:
[snip]
Executing(%build): /bin/bash -e /var/tmp/rpm-tmp.67959
+ umask 022
+ cd /home/jk/devel/kernel-snapshot/rpm/BUILD
+ cd kernel-2.6.26
+ make clean
+ make '%{_smp_mflags}'
make[3]: *** No rule to make target `%{_smp_mflags}'. Stop.
error: Bad exit status from /var/tmp/rpm-tmp.67959 (%build)
This change uses the 'null if not set' reference to the _smp_mflags
macro instead.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
The number of pending changes is pretty useless, so encoding it into the
version is just annoying by the constant shuffle in corresponding modules.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
This is patch to fix incorrect mkspec script to make rpm correctly at 2.6.27 vanilla kernel.
This is regression in 2.6.27. 2.6.26 make rpm work good.
In 2.6.27 'make rpm' say error from rpmbuild "Many unpacked files (*.fw)."
Signed-off-by: Evgeniy Manachkin <sfstudio@mail.ru>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Stable <stable@kernel.org>
* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (31 commits)
ftrace: fix current_tracer error return
tracing: fix a build error on alpha
ftrace: use a real variable for ftrace_nop in x86
tracing/ftrace: make boot tracer select the sched_switch tracer
tracepoint: check if the probe has been registered
asm-generic: define DIE_OOPS in asm-generic
trace: fix printk warning for u64
ftrace: warning in kernel/trace/ftrace.c
ftrace: fix build failure
ftrace, powerpc, sparc64, x86: remove notrace from arch ftrace file
ftrace: remove ftrace hash
ftrace: remove mcount set
ftrace: remove daemon
ftrace: disable dynamic ftrace for all archs that use daemon
ftrace: add ftrace warn on to disable ftrace
ftrace: only have ftrace_kill atomic
ftrace: use probe_kernel
ftrace: comment arch ftrace code
ftrace: return error on failed modified text.
ftrace: dynamic ftrace process only text section
...
This script parses a function trace and then produces a hierarchical
view of the function call stack after processing it into a tree.
Changes on V2 thanks to the trace sent by Steven:
- Support both the files "trace" and "trace_pipe" (comments and space
differences)
- Correct the mini HOW-TO at the beginning.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Allow macros that are annotated with kernel-doc to contain whitespace
between the '#' and "define". It's valid and being used, so allow it.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If you use KCONFIG_ALLCONFIG (even with empty file) you get broken
allmodconfig/allyesconfig; CONFIG_MODULES gets turned off, with obvious
massive fallout.
Breakage had been introduced when conf_set_all_new_symbols() got used
for allmodconfig et.al.
What happens is that sym_calc_value(modules_sym) done in
conf_read_simple() sets SYMBOL_VALID on both modules_sym and MODULES.
When we get to conf_set_all_new_symbols(), we set sym->def[S_DEF_USER]
on everything, but it has no effect on sym->curr for the symbols that
already have SYMBOL_VALID - these are stuck.
Solution: use sym_clear_all_valid() in there. Note that it makes
reevaluation of modules_sym redundant - sym_clear_all_valid() will do
that itself.
[ Fixes http://bugzilla.kernel.org/show_bug.cgi?id=11512, says Alexey ]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
math-emu: Fix thinko in _FP_DIV
math-emu: Fix signalling of underflow and inexact while packing result.
sparc: Add checkstack support
sparc: correct section of current_pc()
sparc: correct section of apc_no_idle
sparc64: Fix race in arch/sparc64/kernel/trampoline.S
The text section stays in memory without ever leaving. With the exception
of modules, but modules know how to handle that case. With the dynamic
ftrace tracer, we need to make sure that it does not try to modify code
that no longer exists. The only safe section is .text.
This patch changes the recordmcount script to only record the mcount calls
in the .text sections.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The recordmcount script requires that the actual arch is passed in.
This works well when ARCH=i386 or ARCH=x86_64 but does not handle the
case of ARCH=x86.
This patch adds a parameter to the function to pass in the number of
bits of the architecture. So that it can determine if x86 should be
run for x86_64 or i386 archs.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Teach scripts/kconfig/Makefile and top-level Makefile that arch/*/Makefile
is allowed to say Kconfig := <whatever I want instead of arch/blah/Kconfig>.
Rewrite arch/um/Kconfig and arch/um/Kconfig.<subarch> so that the latter
would be top-level one (and include the pieces of the former).
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
When bootgraph.pl parses a file, it gives one row for each initcall's
pid. But they are displayed in random (perl hash) order. Let's
sort the pids by the start time of their first initcall instead.
This helps trace module initcalls, where each has a separate pid.
bootgraph.pl will show module initcalls during the initramfs; it may
also be adapted to show subsequent module initcalls.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Acked-by: Frédéric Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
As a perl novice, I would prefer to have the benefit of the interpreters'
wisdom. It turns out there were already some warnings, so let's fix them.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Acked-by: Frédéric Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Update assorted email addresses and related info to point
to a single current, valid address.
additionally
- trivial CREDITS entry updates. (Not that this file means much any more)
- remove arjans dead redhat.com address from powernow driver
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The generated 'capflags.c' file wasn't properly ignored, and the list of
files in scripts/basic/ wasn't up-to-date.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (46 commits)
UIO: Fix mapping of logical and virtual memory
UIO: add automata sercos3 pci card support
UIO: Change driver name of uio_pdrv
UIO: Add alignment warnings for uio-mem
Driver core: add bus_sort_breadthfirst() function
NET: convert the phy_device file to use bus_find_device_by_name
kobject: Cleanup kobject_rename and !CONFIG_SYSFS
kobject: Fix kobject_rename and !CONFIG_SYSFS
sysfs: Make dir and name args to sysfs_notify() const
platform: add new device registration helper
sysfs: use ilookup5() instead of ilookup5_nowait()
PNP: create device attributes via default device attributes
Driver core: make bus_find_device_by_name() more robust
usb: turn dev_warn+WARN_ON combos into dev_WARN
debug: use dev_WARN() rather than WARN_ON() in device_pm_add()
debug: Introduce a dev_WARN() function
sysfs: fix deadlock
device model: Do a quickcheck for driver binding before doing an expensive check
Driver core: Fix cleanup in device_create_vargs().
Driver core: Clarify device cleanup.
...
When specifying case we may have comments and/or braces at the end without
actually having a 'statement'. Allow for these to occur in any order.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When ignoring a macro in the middle of a conditional, we need to ignore
the macro start and any continuation lines.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When reporting some complex trailing statements we report only the
starting line of the error, that tends to imply the shown line is in error
and confuse the reader. As we do know where the actual error is report
that line too with an appropriate gap marker where applicable.
#ERROR: trailing statements should be on next line
#1: FILE: Z202.c:1:
+ for (pbh = page_buffers(bh->b_page); pbh != bh;
+ pbh = pbh->b_this_page, key++);
#ERROR: trailing statements should be on next line
#4: FILE: Z202.c:4:
+ for (pbh = page_buffers(bh->b_page);
[...]
+ pbh = pbh->b_this_page, key++);
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When we want to confirm an export is directly after its definition we need
to allow for DEFINE_ style macros. Add these to the execeptions.
Refactor the exceptions.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We are missing 'simple' values which include square brackets. Refactor to
ensure we handle nesting correctly and detect these simple forms.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When we hit and #else or #elif we know we are meeting an alternative piece
of code. All bets are off on indent if we did not see the open of the
control so stop checking.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Within the type checker we have a number of common kernel types which must
be implemented as typedefs. Pull those out so that we can use the same
expressions to trigger exclusions.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We are likely going to have 24 bit types. Expand the type matcher to
match any size.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We often see macros which define structure members, these are not complex
and necessarily do not have braces or brackets. For example:
#define _PLIST_HEAD_INIT(head) \
.prio_list = LIST_HEAD_INIT((head).prio_list), \
.node_list = LIST_HEAD_INIT((head).node_list)
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If we have sufficient context detect and handle do without braces ({).
Else these incorrectly trigger a trailing statements error for the
associated while.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A label is not a candidate for a possible type. Exclude them.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A do without braces '{' may trigger a false possible type 'do' and then
this may be interpreted as an external definition of foo():
do
foo();
while (bar);
Add do to the type exclusions. Fix up tests so we can check for them.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We should only apply source checks to lines within hunks. Checks which
are anchored in the context may falsly trigger in the commentory. Ensure
they only match within valid hunk lines.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Correct calculation of the number of lines of condition where we have
suspect indent.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Firmware may be included in the kernel as .ihex files. These are
inherantly text, but not source. The line ending checks are applicable to
these kinds of file, allow just these checks to apply to all files.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ensure that a close comment cannot incorrectly trigger in the middle of a
string. Reported by Jaswinder Singh.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Cc: Jaswinder Singh <jaswinder@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When the last hunk of a patch is short it will trigger errors from
checkpatch:
Use of uninitialized value in pattern match (m//)
at /usr/local/bin/checkpatch.pl line 394.
Use of uninitialized value in concatenation (.) or string
at /usr/local/bin/checkpatch.pl line 397.
Use of uninitialized value in pattern match (m//)
Avoid touching beyond the last line. Reported by Julien Brunel.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Cc: Julien Brunel <brunel@diku.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We should only be checking changes lines for the trailing statement check
on case/default statements.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
So that we eat our own dog food ensure the indent checks apply to perl
too.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Report the correct lines for single statement blocks. Currently we are
reporting the right number of lines, but not skipping the negative lines.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ensure that we handle literal %'s correctly when adjacent to a %Lx.
%Lx bad
%%Lx good
%%%Lx bad
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We should skip over and check the lines which follow preprocessor
statements, labels, and blank lines. These all have legitimate reasons to
be indented differently.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We are currently only reporting syspect indents if the conditional is
modified but the indent missmatch could be generated by the body changing,
make sure we catch both. Also only report the first line of the body, and
more importantly make sure we report the raw copy of the line. Finally
report the indent levels to make it easier to understand what is wrong.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Absolute references to kernel source files are generally only useful
locally to the originator of the patch. Check for any such references and
report them.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It is much more likely that an architecture file will want to directly
include asm header files. Reduce this WARNING to a CHECK when the
referencing file is in the arch directory.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It is possible to have other include/asm paths within the tree which are
not subject to the do not edit checks. Ignore those.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We are not counting the lines in the block correctly which causes the
comment scan to stop prematurly and thus miss comments which end at the
end of the block. Fix this up.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Only pull in new extension lines where the current contents ends with a \.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add the cacheline alignment modifiers to the attribute lists.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add support for direct testing of the attribute matcher, add basic tests
for it.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It is a common and sane idiom to allow a single return on the end of a
case statement:
switch (...) {
case foo: return bar;
}
Add an exception for this.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Labels have different indent rules and must be ignored when checking the
conditional indent levels. Also correct identify labels in single
statement conditionals.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It is possible to use double ampersand (&&) in unary context where it
means the address of a goto label. Handle spacing for it.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It is wholy reasonable to have square brackets representing array slices
in braces on the same line. These should be spaced.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Base infrastructure to enable per-module debug messages.
I've introduced CONFIG_DYNAMIC_PRINTK_DEBUG, which when enabled centralizes
control of debugging statements on a per-module basis in one /proc file,
currently, <debugfs>/dynamic_printk/modules. When, CONFIG_DYNAMIC_PRINTK_DEBUG,
is not set, debugging statements can still be enabled as before, often by
defining 'DEBUG' for the proper compilation unit. Thus, this patch set has no
affect when CONFIG_DYNAMIC_PRINTK_DEBUG is not set.
The infrastructure currently ties into all pr_debug() and dev_dbg() calls. That
is, if CONFIG_DYNAMIC_PRINTK_DEBUG is set, all pr_debug() and dev_dbg() calls
can be dynamically enabled/disabled on a per-module basis.
Future plans include extending this functionality to subsystems, that define
their own debug levels and flags.
Usage:
Dynamic debugging is controlled by the debugfs file,
<debugfs>/dynamic_printk/modules. This file contains a list of the modules that
can be enabled. The format of the file is as follows:
<module_name> <enabled=0/1>
.
.
.
<module_name> : Name of the module in which the debug call resides
<enabled=0/1> : whether the messages are enabled or not
For example:
snd_hda_intel enabled=0
fixup enabled=1
driver enabled=0
Enable a module:
$echo "set enabled=1 <module_name>" > dynamic_printk/modules
Disable a module:
$echo "set enabled=0 <module_name>" > dynamic_printk/modules
Enable all modules:
$echo "set enabled=1 all" > dynamic_printk/modules
Disable all modules:
$echo "set enabled=0 all" > dynamic_printk/modules
Finally, passing "dynamic_printk" at the command line enables
debugging for all modules. This mode can be turned off via the above
disable command.
[gkh: minor cleanups and tweaks to make the build work quietly]
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (55 commits)
HID: build drivers for all quirky devices by default
HID: add missing blacklist entry for Apple ATV ircontrol
HID: add support for Bright ABNT2 brazilian device
HID: Don't let Avermedia Radio FM800 be handled by usb hid drivers
HID: fix numlock led on Dell device 0x413c/0x2105
HID: remove warn() macro from usb hid drivers
HID: remove info() macro from usb HID drivers
HID: add appletv IR receiver quirk
HID: fix a lockup regression when using force feedback on a PID device
HID: hiddev.h: Fix example code.
HID: hiddev.h: Fix mixed space and tabs in example code.
HID: convert to dev_* prints
HID: remove hid-ff
HID: move zeroplus FF processing
HID: move thrustmaster FF processing
HID: move pantherlord FF processing
HID: fix incorrent length condition in hidraw_write()
HID: fix tty<->hid deadlock
HID: ignore iBuddy devices
HID: report descriptor fix for remaining MacBook JIS keyboards
...
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arjan/linux-2.6-fastboot:
raid, fastboot: hide RAID autodetect option if MD is compiled as a module
raid: make RAID autodetect default a KConfig option
warning: fix init do_mounts_md c
fastboot: make the RAID autostart code print a message just before waiting
fastboot: make the raid autodetect code wait for all devices to init
fastboot: Fix bootgraph.pl initcall name regexp
fastboot: fix issues and improve output of bootgraph.pl
Add a script to visualize the kernel boot process / time
When bootgraph.pl parses a file, it gives one row
for each initcall's pid. But only few of them will
be displayed => the longest.
This patch corrects it by giving only a rows for pids
which have initcalls that will be displayed.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The regexp used to match the start and the end of an initcall
are matching only on [a-zA-Z\_]. This rules out initcalls with
a number in them. This patch is fixing that.
Signed-off-by: Arnaud Patard <apatard@mandriva.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
David Sanders reported some issues with bootgraph.pl's display
of his sytems bootup; this commit fixes these by scaling the graph
not from 0 - end time but from the first initcall to the end time;
the minimum display size etc also now need to scale with this, as does
the axis display.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Arjan van de Ven