I have been running make namespacecheck to look for unneeded globals, and
found these in ext4.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
A missing cast means that when we are truncating a file which is less
than 60 bytes, we don't clear the correct area of memory, and in fact
we can end up truncating the next inode in the inode table, or worse
yet, some other kernel data structure.
Addresses-Coverity-Id: #751987
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
The function has a bit non-standard (for ext4) error recovery in that it
used a mix of 'out' labels and testing for 'handle' being NULL. There
isn't a good reason for that in the function so clean it up a bit.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Similarly as other ->write_begin functions in ext4, also
ext4_da_write_inline_data_begin() should retry allocation if the
conversion failed because of ENOSPC. This avoids returning ENOSPC
prematurely because of uncommitted block deletions.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In ext4_read_inline_dir(), if there is inline data, the successful
return value is the return value of ext4_read_inline_data(). Howewer,
this is used by ext4_readdir(), and while it seems harmless to return
a positive value on success, it's inconsistent, since historically
we've always return 0 on success.
Signed-off-by: BoxiLiu <lewis.liulei@huawei.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Acked-by: Tao Ma <boyu.mt@taobao.com>
category, of note is a fix for on-line resizing file systems where the
block size is smaller than the page size (i.e., file systems 1k blocks
on x86, or more interestingly file systems with 4k blocks on Power or
ia64 systems.)
In the cleanup category, the ext4's punch hole implementation was
significantly improved by Lukas Czerner, and now supports bigalloc
file systems. In addition, Jan Kara significantly cleaned up the
write submission code path. We also improved error checking and added
a few sanity checks.
In the optimizations category, two major optimizations deserve
mention. The first is that ext4_writepages() is now used for
nodelalloc and ext3 compatibility mode. This allows writes to be
submitted much more efficiently as a single bio request, instead of
being sent as individual 4k writes into the block layer (which then
relied on the elevator code to coalesce the requests in the block
queue). Secondly, the extent cache shrink mechanism, which was
introduce in 3.9, no longer has a scalability bottleneck caused by the
i_es_lru spinlock. Other optimizations include some changes to reduce
CPU usage and to avoid issuing empty commits unnecessarily.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=SwaI
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 update from Ted Ts'o:
"Lots of bug fixes, cleanups and optimizations. In the bug fixes
category, of note is a fix for on-line resizing file systems where the
block size is smaller than the page size (i.e., file systems 1k blocks
on x86, or more interestingly file systems with 4k blocks on Power or
ia64 systems.)
In the cleanup category, the ext4's punch hole implementation was
significantly improved by Lukas Czerner, and now supports bigalloc
file systems. In addition, Jan Kara significantly cleaned up the
write submission code path. We also improved error checking and added
a few sanity checks.
In the optimizations category, two major optimizations deserve
mention. The first is that ext4_writepages() is now used for
nodelalloc and ext3 compatibility mode. This allows writes to be
submitted much more efficiently as a single bio request, instead of
being sent as individual 4k writes into the block layer (which then
relied on the elevator code to coalesce the requests in the block
queue). Secondly, the extent cache shrink mechanism, which was
introduce in 3.9, no longer has a scalability bottleneck caused by the
i_es_lru spinlock. Other optimizations include some changes to reduce
CPU usage and to avoid issuing empty commits unnecessarily."
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (86 commits)
ext4: optimize starting extent in ext4_ext_rm_leaf()
jbd2: invalidate handle if jbd2_journal_restart() fails
ext4: translate flag bits to strings in tracepoints
ext4: fix up error handling for mpage_map_and_submit_extent()
jbd2: fix theoretical race in jbd2__journal_restart
ext4: only zero partial blocks in ext4_zero_partial_blocks()
ext4: check error return from ext4_write_inline_data_end()
ext4: delete unnecessary C statements
ext3,ext4: don't mess with dir_file->f_pos in htree_dirblock_to_tree()
jbd2: move superblock checksum calculation to jbd2_write_superblock()
ext4: pass inode pointer instead of file pointer to punch hole
ext4: improve free space calculation for inline_data
ext4: reduce object size when !CONFIG_PRINTK
ext4: improve extent cache shrink mechanism to avoid to burn CPU time
ext4: implement error handling of ext4_mb_new_preallocation()
ext4: fix corruption when online resizing a fs with 1K block size
ext4: delete unused variables
ext4: return FIEMAP_EXTENT_UNKNOWN for delalloc extents
jbd2: remove debug dependency on debug_fs and update Kconfig help text
jbd2: use a single printk for jbd_debug()
...
In ext4 feature inline_data,it use the xattr's space to store the
inline data in inode.When we calculate the inline data as the xattr,we
add the pad.But in get_max_inline_xattr_value_size() function we count
the free space without pad.It cause some contents are moved to a block
even if it can be
stored in the inode.
Signed-off-by: liulei <lewis.liulei@huawei.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Tao Ma <boyu.mt@taobao.com>
On 32-bit archs when sector_t is defined as 32-bit the logic computing
data offset in ext4_inline_data_fiemap(). Fix that by properly typing
the shifted value.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Zach reported a problem that if inline data is enabled, we don't
tell the difference between the offset of '.' and '..'. And a
getdents will fail if the user only want to get '.'. And what's
worse, we may meet with duplicate dir entries as the offset
for inline dir and non-inline one is quite different.
This patch just try to resolve this problem if dir_index
is disabled. In this case, f_pos is the real offset with
the dir block, so for inline dir, we just pretend as if
we are a dir block and returns the offset like a norml
dir block does.
Reported-by: Zach Brown <zab@redhat.com>
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Zach reported a problem that if inline data is enabled, we don't
tell the difference between the offset of '.' and '..'. And a
getdents will fail if the user only want to get '.' and what's worse,
if there is a conversion happens when the user calls getdents
many times, he/she may get the same entry twice.
In theory, a dir block would also fail if it is converted to a
hashed-index based dir since f_pos will become a hash value, not the
real one, but it doesn't happen. And a deep investigation shows that
we uses a hash based solution even for a normal dir if the dir_index
feature is enabled.
So this patch just adds a new htree_inlinedir_to_tree for inline dir,
and if we find that the hash index is supported, we will do like what
we do for a dir block.
Reported-by: Zach Brown <zab@redhat.com>
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Pull vfs pile (part one) from Al Viro:
"Assorted stuff - cleaning namei.c up a bit, fixing ->d_name/->d_parent
locking violations, etc.
The most visible changes here are death of FS_REVAL_DOT (replaced with
"has ->d_weak_revalidate()") and a new helper getting from struct file
to inode. Some bits of preparation to xattr method interface changes.
Misc patches by various people sent this cycle *and* ocfs2 fixes from
several cycles ago that should've been upstream right then.
PS: the next vfs pile will be xattr stuff."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits)
saner proc_get_inode() calling conventions
proc: avoid extra pde_put() in proc_fill_super()
fs: change return values from -EACCES to -EPERM
fs/exec.c: make bprm_mm_init() static
ocfs2/dlm: use GFP_ATOMIC inside a spin_lock
ocfs2: fix possible use-after-free with AIO
ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path
get_empty_filp()/alloc_file() leave both ->f_pos and ->f_version zero
target: writev() on single-element vector is pointless
export kernel_write(), convert open-coded instances
fs: encode_fh: return FILEID_INVALID if invalid fid_type
kill f_vfsmnt
vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op
nfsd: handle vfs_getattr errors in acl protocol
switch vfs_getattr() to struct path
default SET_PERSONALITY() in linux/elf.h
ceph: prepopulate inodes only when request is aborted
d_hash_and_lookup(): export, switch open-coded instances
9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate()
9p: split dropping the acls from v9fs_set_create_acl()
...
So we can better understand what bits of ext4 are responsible for
long-running jbd2 handles, use jbd2__journal_start() so we can pass
context information for logging purposes.
The recommended way for finding the longer-running handles is:
T=/sys/kernel/debug/tracing
EVENT=$T/events/jbd2/jbd2_handle_stats
echo "interval > 5" > $EVENT/filter
echo 1 > $EVENT/enable
./run-my-fs-benchmark
cat $T/trace > /tmp/problem-handles
This will list handles that were active for longer than 20ms. Having
longer-running handles is bad, because a commit started at the wrong
time could stall for those 20+ milliseconds, which could delay an
fsync() or an O_SYNC operation. Here is an example line from the
trace file describing a handle which lived on for 311 jiffies, or over
1.2 seconds:
postmark-2917 [000] .... 196.435786: jbd2_handle_stats: dev 254,32
tid 570 type 2 line_no 2541 interval 311 sync 0 requested_blocks 1
dirtied_blocks 0
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The only reason for sb_getblk() failing is if it can't allocate the
buffer_head. So ENOMEM is more appropriate than EIO. In addition,
make sure that the file system is marked as being inconsistent if
sb_getblk() fails.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
Not all architectures (in particular, sparc64) have empty_zero_page.
So instead of copying from empty_zero_page, use memset to clear the
inline data by signalling to ext4_xattr_set_entry() via a magic
pointer value, EXT4_ZERO_ATTR_VALUE, which is defined by casting -1 to
a pointer.
This fixes a build failure on sparc64, and the memset() should be more
efficient than using memcpy() anyway.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If we are punching hole in a file, we will return ENOTSUPP.
As for the fallocation of some extents, we will convert the
inline data to a normal extent based file first.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Now we that store data in the inode, in case we need to store some
xattrs and inode doesn't have enough space, Andreas suggested that we
should keep the xattr(metadata) in and data should be pushed out. So
this patch does the work.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
fiemap is used to find the disk layout of a file, as for inline data,
let us just pretend like a file with just one extent.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In case we rename a directory, ext4_rename has to read the dir block
and change its dotdot's information. The old ext4_rename encapsulated
the dir_block read into itself. So this patch adds a new function
ext4_get_first_dir_block() which gets the dir buffer information so
the ext4_rename can handle it properly. As it will also change the
parent inode number, we return the parent_de so that ext4_rename() can
handle it more easily.
ext4_find_entry is also changed so that the caller(rename) can tell
whether the found entry is an inlined one or not and journaling the
corresponding buffer head.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
empty_dir is used when deleting a dir. So it should handle inline dir
properly.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Create a new function ext4_find_inline_entry() to handle the case of
inline data.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
For "." and "..", we just call filldir by ourselves
instead of iterating the real dir entry.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch let add_dir_entry handle the inline data case. So the
dir is initialized as inline dir first and then we can try to add
some files to it, when the inline space can't hold all the entries,
a dir block will be created and the dir entry will be moved to it.
Also for an inlined dir, "." and ".." are removed and we only use
4 bytes to store the parent inode number. These 2 entries will be
added when we convert an inline dir to a block-based one.
[ Folded in patch from Dan Carpenter to remove an unused variable. ]
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
For delayed allocation mode, we write to inline data if the file
is small enough. And in case of we write to some offset larger
than the inline size, the 1st page is dirtied, so that
ext4_da_writepages can handle the conversion. When the 1st page
is initialized with blocks, the inline part is removed.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
For a normal write case (not journalled write, not delayed
allocation), we write to the inline if the file is small and convert
it to an extent based file when the write is larger than the max
inline size.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Let readpage and readpages handle the case when we want to read an
inlined file.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Implement inline data with xattr.
Now we use "system.data" to store xattr, and the xattr will
be extended if the i_size is increased while we don't release
the space during truncate.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
liang xie