Commit Graph

8233 Commits

Author SHA1 Message Date
Namhyung Kim 59c624e239 perf hists browser: Fix percent display in callchains
When there's only a single callchain, perf doesn't print its percentage
in front of the symbols.  This is because it assumes that the percentage
is same as parents.  But if a percent limit is applied, it's possible
that there are actually a couple of child nodes but only one of them is
shown.  In this case it should display the percent to prevent
misunderstanding of its percentage is same as the parent's.

For example, let's see the following callchain.

  $ perf report --no-children --percent-limit 0.01 --tui
  ...
  -    0.06%  sleep    [kernel.vmlinux]    [k] kmem_cache_alloc_trace
       kmem_cache_alloc_trace
     - perf_event_mmap
        - 0.04% mmap_region
             do_mmap_pgoff
           - vm_mmap_pgoff
              + 0.02% sys_mmap_pgoff
              + 0.02% vm_mmap
           + 0.02% mprotect_fixup

Current code omits the percent if 'mmap_region' becomes the only node
when percent limit is set to 0.03%, its percent is not 0.06% but users
will assume it incorrectly.

Before:

  $ perf report --no-children --percent-limit 0.03 --tui
  ...
     0.06%  sleep    [kernel.vmlinux]    [k] kmem_cache_alloc_trace
       kmem_cache_alloc_trace
     - perf_event_mmap
        - mmap_region
          do_mmap_pgoff
          vm_mmap_pgoff

After:

  $ perf report --no-children --percent-limit 0.03 --tui
  ...
     0.06%  sleep    [kernel.vmlinux]    [k] kmem_cache_alloc_trace
       kmem_cache_alloc_trace
     - perf_event_mmap
        - 0.04% mmap_region
             do_mmap_pgoff
             vm_mmap_pgoff

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1453909257-26015-10-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-01 17:46:27 -03:00
Namhyung Kim 5eca104eee perf hists browser: Pass parent_total to callchain print functions
Pass parent node's total period to callchain print functions.  This info
is needed by later patch to determine whether it can omit percent or not
correctly.

No functional change intended.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1453909257-26015-9-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-01 17:45:42 -03:00
Namhyung Kim 0c841c6c16 perf hists browser: Fix dump to show correct callchain style
The commit 8c430a3486 ("perf hists browser: Support folded
callchains") missed to update hist_browser__dump() so it always shows
graph-style callchains regardless of current setting.

To fix that, factor out callchain printing code and rename the existing
function which prints graph-style callchain.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 8c430a3486 ("perf hists browser: Support folded callchains")
Link: http://lkml.kernel.org/r/1453909257-26015-8-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-01 17:44:30 -03:00
Namhyung Kim 7ed5d6e28a perf report: Fix percent display in callchains on --stdio
When there's only a single callchain, perf doesn't print its percentage
in front of the symbols.  This is because it assumes that the percentage
is same as parents.  But if a percent limit is applied, it's possible
that there are actually a couple of child nodes but only one of them is
shown.  In this case it should display the percent to prevent
misunderstanding of its percentage is same as the parent's.

For example, let's see the following callchain.

  $ perf report -s comm --percent-limit 0.01 --stdio
  ...
     9.95%  swapper
            |
            |--7.57%--intel_idle
            |          cpuidle_enter_state
            |          cpuidle_enter
            |          call_cpuidle
            |          cpu_startup_entry
            |          |
            |          |--4.89%--start_secondary
            |          |
            |           --2.68%--rest_init
            |                     start_kernel
            |                     x86_64_start_reservations
            |                     x86_64_start_kernel
	    |
	    |--0.15%--__schedule
	    |          |
	    |          |--0.13%--schedule
	    |          |          schedule_preempt_disable
	    |          |          cpu_startup_entry
            |          |          |
            |          |          |--0.09%--start_secondary
            |          |          |
            |          |           --0.04%--rest_init
            |          |                     start_kernel
            |          |                     x86_64_start_reservations
            |          |                     x86_64_start_kernel
            |          |
            |           --0.01%--schedule_preempt_disabled
            |                     cpu_startup_entry
  ...

Current code omits the percent if 'intel_idle' becomes the only node
when percent limit is set to 0.5%, its percent is not 9.95% but users
will assume it incorrectly.

Before:

  $ perf report --percent-limit 0.5 --stdio
  ...
     9.95%  swapper
            |
            ---intel_idle
               cpuidle_enter_state
               cpuidle_enter
               call_cpuidle
               cpu_startup_entry
               |
               |--4.89%--start_secondary
               |
                --2.68%--rest_init
                          start_kernel
                          x86_64_start_reservations
                          x86_64_start_kernel

After:

  $ perf report --percent-limit 0.5 --stdio
  ...
     9.95%  swapper
            |
             --7.57%--intel_idle
                       cpuidle_enter_state
                       cpuidle_enter
                       call_cpuidle
                       cpu_startup_entry
                       |
                       |--4.89%--start_secondary
                       |
                        --2.68%--rest_init
                                  start_kernel
                                  x86_64_start_reservations
                                  x86_64_start_kernel

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1453909257-26015-7-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-01 17:41:32 -03:00
Namhyung Kim 54d27b3119 perf callchain: Pass parent_samples to __callchain__fprintf_graph()
Pass hist entry's period to graph callchain print function.  This info
is needed by later patch to determine whether it can omit percentage of
top-level node or not.

No functional change intended.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1453909257-26015-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-01 17:39:52 -03:00
Namhyung Kim 7e597d327e perf report: Get rid of hist_entry__callchain_fprintf()
It's just a wrapper function to align the start position ofcallchains to
'comm' of each thread if it's a first sort key.  But it doesn't not work
with tracepoint events and also with upcoming hierarchy view.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1453909257-26015-5-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-01 17:20:31 -03:00
Namhyung Kim 2665b4528d perf report: Apply --percent-limit to callchains also
Currently --percent-limit option only works for hist entries.  However
it'd be better to have same effect to callchains as well

Requested-by: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1453909257-26015-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-01 17:12:00 -03:00
Namhyung Kim 0f58474ec8 perf hists: Update hists' total period when adding entries
Currently the hist entry addition path doesn't update total_period of
hists and it's calculated during 'resort' path.  But the resort path
needs to know the total period before doing its job because it's used
for calculating percent limit of callchains in hist entries.

So this patch update the total period during the addition path.  It
makes the percent limit of callchains working (again).

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1453909257-26015-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-01 16:45:44 -03:00
Namhyung Kim 744070e0e4 perf hists: Fix min callchain hits calculation
The total period should be get using hists__total_period() since it
takes filtered entries into account.  In addition, if callchain mode is
'fractal', the total period should be the entry's period.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1453909257-26015-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-01 16:42:31 -03:00
Arnaldo Carvalho de Melo 814568db64 perf build: Align the names of the build tests:
$ make -C tools/perf build-test
  make[1]: Entering directory `/home/acme/git/linux/tools/perf'
                 make_pure_O: cd . && make -f Makefile  O=/tmp/tmp.mPx0Cmik3f DESTDIR=/tmp/tmp.U0SUmVbtJm
            make_clean_all_O: cd . && make -f Makefile  O=/tmp/tmp.Yl5UzhTU7T DESTDIR=/tmp/tmp.fop1E4jdER clean all
                make_debug_O: cd . && make -f Makefile  O=/tmp/tmp.pMn2ozBoXC DESTDIR=/tmp/tmp.azxhDp5sEp DEBUG=1
           make_no_libperl_O: cd . && make -f Makefile  O=/tmp/tmp.qJPiINMtA7 DESTDIR=/tmp/tmp.KNMrLeGDxZ NO_LIBPERL=1
  <SNIP>

More needs to be done to make it more compact, i.e. elide the '-f Makefile',
remove that 'cd . &&', move the DESTDIR= and O= to the end, as they don't
convey that much information besides the fact that they are being set to some
random directory just for this build, move the meat, i.e. the meaningful
feature disabling bits to the start, etc.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-wir3w3o4f1nmbgcxgnx8cj9c@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-29 17:51:04 -03:00
Hemant Kumar 78e6c39b23 perf kvm/powerpc: Add support for HCALL reasons
Powerpc provides hcall events that also provides insights into guest
behaviour. Enhance perf kvm stat to record and analyze hcall events.

 - To trace hcall events :
  perf kvm stat record

 - To show the results :
  perf kvm stat report --event=hcall

The result shows the number of hypervisor calls from the guest grouped
by their respective reasons displayed with the frequency.

This patch makes use of two additional tracepoints
"kvm_hv:kvm_hcall_enter" and "kvm_hv:kvm_hcall_exit". To map the hcall
codes to their respective names, it needs a mapping. Such mapping is
added in this patch in book3s_hcalls.h.

 # pgrep qemu
A sample output :
19378
60515

2 VMs running.

 # perf kvm stat record -a
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 4.153 MB perf.data.guest (39624
samples) ]

 # perf kvm stat report -p 60515 --event=hcall

Analyze events for all VMs, all VCPUs:

    HCALL-EVENT Samples Samples% Time% MinTime MaxTime  AvgTime

          H_IPI     822  66.08% 88.10% 0.63us  11.38us 2.05us (+- 1.42%)
     H_SEND_CRQ     144  11.58%  3.77% 0.41us   0.88us 0.50us (+- 1.47%)
   H_VIO_SIGNAL     118   9.49%  2.86% 0.37us   0.83us 0.47us (+- 1.43%)
H_PUT_TERM_CHAR      76   6.11%  2.07% 0.37us   0.90us 0.52us (+- 2.43%)
H_GET_TERM_CHAR      74   5.95%  2.23% 0.37us   1.70us 0.58us (+- 4.77%)
         H_RTAS       6   0.48%  0.85% 1.10us   9.25us 2.70us (+-48.57%)
      H_PERFMON       4   0.32%  0.12% 0.41us   0.96us 0.59us (+-20.92%)

Total Samples:1244, Total events handled time:1916.69us.

Signed-off-by: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Scott  Wood <scottwood@freescale.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1453962787-15376-4-git-send-email-hemant@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-29 17:49:54 -03:00
Hemant Kumar 066d3593e1 perf kvm/powerpc: Port perf kvm stat to powerpc
perf kvm can be used to analyze guest exit reasons. This support already
exists in x86. Hence, porting it to powerpc.

 - To trace KVM events :
  perf kvm stat record
  If many guests are running, we can track for a specific guest by using
  --pid as in : perf kvm stat record --pid <pid>

 - To see the results :
  perf kvm stat report

The result shows the number of exits (from the guest context to
host/hypervisor context) grouped by their respective exit reasons with
their frequency.

Since, different powerpc machines have different KVM tracepoints, this
patch discovers the available tracepoints dynamically and accordingly
looks for them. If any single tracepoint is not present, this support
won't be enabled for reporting. To record, this will fail if any of the
events we are looking to record isn't available.  Right now, its only
supported on PowerPC Book3S_HV architectures.

To analyze the different exits, group them and present them (in a slight
descriptive way) to the user, we need a mapping between the "exit code"
(dumped in the kvm_guest_exit tracepoint data) and to its related
Interrupt vector description (exit reason). This patch adds this mapping
in book3s_hv_exits.h.

It records on two available KVM tracepoints for book3s_hv:

"kvm_hv:kvm_guest_exit" and "kvm_hv:kvm_guest_enter".

Here is a sample o/p:
 # pgrep qemu
19378
60515

2 Guests are running on the host.

 # perf kvm stat record -a
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 4.153 MB perf.data.guest (39624
samples) ]

 # perf kvm stat report -p 60515

Analyze events for pid(s) 60515, all VCPUs:

     VM-EXIT Samples Samples% Time% MinTime    MaxTime  Avg time

       SYSCALL  9141  63.67%  7.49% 1.26us   5782.39us    9.87us (+- 6.46%)
H_DATA_STORAGE  4114  28.66%  5.07% 1.72us   4597.68us   14.84us (+-20.06%)
HV_DECREMENTER   418   2.91%  4.26% 0.70us  30002.22us  122.58us (+-70.29%)
      EXTERNAL   392   2.73%  0.06% 0.64us    104.10us    1.94us (+-18.83%)
RETURN_TO_HOST   287   2.00% 83.11% 1.53us 124240.15us 3486.52us (+-16.81%)
H_INST_STORAGE     5   0.03%  0.00% 1.88us      3.73us    2.39us (+-14.20%)

Total Samples:14357, Total events handled time:1203918.42us.

Signed-off-by: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Scott  Wood <scottwood@freescale.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1453962787-15376-3-git-send-email-hemant@linux.vnet.ibm.com
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-29 17:49:54 -03:00
Hemant Kumar 48deaa74fc perf kvm/{x86,s390}: Remove const from kvm_events_tp
This patch removes the "const" qualifier from kvm_events_tp declaration
to account for the fact that some architectures may need to update this
variable dynamically. For instance, powerpc will need to update this
variable dynamically depending on the machine type.

Signed-off-by: Hemant Kumar <hemant@linux.vnet.ibm.com>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Scott  Wood <scottwood@freescale.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1453962787-15376-2-git-send-email-hemant@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-29 17:49:53 -03:00
Hemant Kumar 162607ea20 perf kvm/{x86,s390}: Remove dependency on uapi/kvm_perf.h
Its better to remove the dependency on uapi/kvm_perf.h to allow dynamic
discovery of kvm events (if its needed). To do this, some extern
variables have been introduced with which we can keep the generic
functions generic.

Signed-off-by: Hemant Kumar <hemant@linux.vnet.ibm.com>
Acked-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Scott  Wood <scottwood@freescale.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1453962787-15376-1-git-send-email-hemant@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-29 17:49:48 -03:00
Wang Nan d2db9a98c3 perf record: Use OPT_BOOLEAN_SET for buildid cache related options
'perf record' knows whether buildid cache is enabled (via
--no-no-buildid-cache) deliberately. Buildid cache can be turned off in
some situations.

Output switching support needs this feature to turn off buildid cache
by default.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1453715801-7732-33-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-29 17:39:07 -03:00
Wang Nan 37b20151ef perf tools: Move timestamp creation to util
Timestamp generation becomes a public available helper. Which will
be used by 'perf record', help it output to split output file based
on time.

For example:

 perf.data.2015122620363710
 perf.data.2015122620364092
 perf.data.2015122620365423
 ...

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1453715801-7732-27-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-29 17:30:06 -03:00
Wang Nan 8fd34e1cce perf test: Improve bp_signal
Will Deacon [1] has some question on patch [2]. This patch improves
test__bp_signal so we can test:

 1. A watchpoint and a breakpoint that fire on the same instruction
 2. Nested signals

Test result:

 On x86_64 and ARM64 (result are similar with patch [2] on ARM64):

  # ./perf test -v signal
  17: Test breakpoint overflow signal handler                  :
  --- start ---
  test child forked, pid 10213
  count1 1, count2 3, count3 2, overflow 3, overflows_2 3
  test child finished with 0
  ---- end ----
  Test breakpoint overflow signal handler: Ok

So at least 2 cases Will doubted are handled correctly.

[1] http://lkml.kernel.org/g/20160104165535.GI1616@arm.com
[2] http://lkml.kernel.org/g/1450921362-198371-1-git-send-email-wangnan0@huawei.com

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: He Kuang <hekuang@huawei.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1453715801-7732-9-git-send-email-wangnan0@huawei.com
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-29 17:28:46 -03:00
Wang Nan 6a7d550e8b perf test: Check environment before start real BPF test
Copying perf to old kernel system results:

  # perf test bpf
  37: Test BPF filter                                          :
  37.1: Test basic BPF filtering                               : FAILED!
  37.2: Test BPF prologue generation                           : Skip

However, in case when kernel doesn't support a test case it should
return 'Skip', 'FAILED!' should be reserved for kernel tests for when
the kernel supports a feature that then fails to work as advertised.

This patch checks environment before real testcase.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1453715801-7732-7-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-29 17:25:43 -03:00
Wang Nan fd786fac78 perf buildid: Fix cpumode of buildid event
There is a nasty confusion that, for kernel module, dso->kernel is not
necessary to be DSO_TYPE_KERNEL or DSO_TYPE_GUEST_KERNEL.  These two
enums are for vmlinux. See thread [1]. We tried to fix this part but it
is costy.

Code machine__write_buildid_table() is another unfortunate function fall
into this trap that, when issuing buildid event for a kernel module,
cpumode it gives to the event is PERF_RECORD_MISC_USER, not
PERF_RECORD_MISC_KERNEL.

However, even with this bug, most of the time it doesn't causes real
problem. I find this issue when trying to use a perf before commit
3d39ac5386 ("perf machine: No need to have two DSOs lists") to parse a
perf.data generated by newest perf.

[1] https://lkml.org/lkml/2015/9/21/908

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1454089251-203152-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-29 17:16:25 -03:00
Mathieu Poirier 14a05e13a0 perf auxtrace: Add perf_evlist pointer to *info_priv_size()
On some architecture the size of the private header may be dependent on
the number of tracers used in the session.  As such adding a "struct
perf_evlist *" parameter, which should contain all the required
information.

Also adjusting the existing client of the interface to take the new
parameter into account.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Grant <al.grant@arm.com>
Cc: Chunyan Zhang <zhang.chunyan@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-doc@vger.kernel.org
Cc: Mike Leach <mike.leach@arm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Rabin Vincent <rabin@rab.in>
Cc: Tor Jeremiassen <tor@ti.com>
Link: http://lkml.kernel.org/r/1452807977-8069-22-git-send-email-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-29 17:14:30 -03:00
Arnaldo Carvalho de Melo a639a62390 perf tools: Speed up build-tests by reducing the number of builds tested
The 'tools/perf/test/make' makefile has in its default, 'all' target
builds that will pollute the source code directory, i.e. that will not
use O= variable.

The 'build-test' should be run as often as possible, preferrably after
each non strictly non-code commit, so speed it up by selecting just
the O= targets.

Furthermore it tests both the Makefile.perf file, that is normally
driven by the main Makefile, and the Makefile, reduce the time in half
by having just MK=Makefile, the most usual, tested by 'build-test'.

Please run:

  make -C tools/perf -f tests/make

from time to time for testing also the in-place build tests.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-jrt9utscsiqkmjy3ccufostd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-29 16:57:38 -03:00
Wang Nan 79191c89a0 perf build: Use feature dump file for build-test
To prevent the feature check tests to run repeately, one time per
'tests/make' target/test, this patch utilizes the previously introduced
'feature-dump' make target and FEATURES_DUMP variable, making sure that
the feature checkers run only once when doing build-test for normal test
cases.

However, since standard users doesn't reuse features dump result, we'd
better give an option to check their behaviors. The above feature
should be used to make build-test faster only. Only utilize it for
build-test.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1454068269-235999-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-29 14:47:52 -03:00
Wang Nan 5a155bb77a perf build: Remove all condition feature check {C,LD}FLAGS
'make feature-dump' should give a stable result, so even 'NO_SOMETHING=1'
is given (for babeltrace, if LIBBABELTRACE=1 is not given), we should
try to detect those feature and {C,LD}FLAGS. Build or not should be
controled independent.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/1454047050-204993-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-29 14:47:52 -03:00
Jiri Olsa 76c4aaec41 perf build: Fix feature-dump checks, we need to test all features
I see problem with test-all case speedup, because it does not
comprise checks for 32bits compilations, fix it.

The problem could be noticed by calling:

  make -C tools/perf feature-dump

That would end up misdetecting the feature-compile-x32, that, building
using 'gcc -mx32' needs stub headers not present in a fedora 23 devel
machine and thus fail to compile, but ended up appearing as detected,
i.e. present in tools/perf/FEATURE-DUMP as 'feature-compile-x32=1'.

With this fix it correctly appears as 'feature-compile-x32=0' and if we
uninstall the libc devel files for 32 bits (glibc-devel.i686), then the
relevant variable is flipped from 'feature-compile-32=1' to
'feature-compile-32=0'.

The same things happened for bionic and libbabeltrace, that were
misdetected because the are no tested in test-all.c

Reported-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-u0sjaddf1r9m8icpd98ry7fz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-28 19:04:19 -03:00
Wang Nan cf9162c290 tools build: Check basic headers for test-compile feature checker
An i386 binary can be linked correctly even without correct headers.
Which causes problem. For exmaple:

 $ mv /tmp/oxygen_root/usr/include/gnu/stubs-32.h{,.bak}
 $ make tools/perf
 Auto-detecting system features:
 ...                         dwarf: [ on  ]
 [SNIP]
   GEN      common-cmds.h
   CC       perf-read-vdso32
 In file included from /tmp/oxygen_root/usr/include/features.h:388:0,
                  from /tmp/oxygen_root/usr/include/stdio.h:27,
                  from perf-read-vdso.c:1:
 /tmp/oxygen_root/usr/include/gnu/stubs.h:7:27: fatal error: gnu/stubs-32.h: No such file or directory
  # include <gnu/stubs-32.h>
                           ^
 compilation terminated.
 ...

In this patch we checks not only compiler and linker, but also basic
headers in test-compile test case, make it fail on a platform
lacking correct headers.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/1453893742-20603-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-27 11:59:32 -03:00
Arnaldo Carvalho de Melo 5ac76283b3 perf cpumap: Auto initialize cpu__max_{node,cpu}
Since it was always checking if the initialization was done, use that
branch to do the initialization if not done already.

With this we reduce the number of exported globals from these files.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20160125212955.GG22501@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-26 16:08:36 -03:00
Namhyung Kim b1baae8919 perf hists browser: Skip scripting when perf.data file not available
The script and data-switch context menu are only meaningful when it
deals with a data file.  So add a check so that it cannot be shown when
perf-top is run.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>,
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1453555902-18401-4-git-send-email-namhyung@kernel.org
[ Use goto skip_scripting instead of two is_report_browser() tests ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-26 16:08:12 -03:00
Wang Nan c053a1506f perf build: Select all feature checkers for feature-dump
Set FEATURE_TESTS to 'all' so all possible feature checkers are
executed. Without this setting the output feature dump file miss some
feature, for example, liberity. Select all checker so we won't get an
incomplete feature dump file.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/1453715801-7732-5-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-26 13:53:10 -03:00
Wang Nan 9fd4186ac1 tools build: Allow subprojects select all feature checkers
Put feature checkers not in original FEATURE_TESTS to a new list and
allow subproject select all feature checkers by setting FEATURE_TESTS to
'all'.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/1453715801-7732-4-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-26 12:12:48 -03:00
Wang Nan 666810e86a perf bpf: Check relocation target section
Libbpf should check the target section before doing relocation to ensure
the relocation is correct. If not, a bug in LLVM causes an error. See
[1].  Also, if an incorrect BPF script uses both global variable and
map, global variable whould be treated as map and be relocated without
error.

This patch saves the id of the map section into obj->efile and compare
target section of a relocation symbol against it during relocation.

Previous patch introduces a test case about this problem.  After this
patch:

  # ~/perf test BPF
  37: Test BPF filter                                          :
  37.1: Test basic BPF filtering                               : Ok
  37.2: Test BPF prologue generation                           : Ok
  37.3: Test BPF relocation checker                            : Ok

  # perf test -v BPF
  ...
  37.3: Test BPF relocation checker                            :
  ...
  libbpf: loading object '[bpf_relocation_test]' from buffer
  libbpf: section .strtab, size 126, link 0, flags 0, type=3
  libbpf: section .text, size 0, link 0, flags 6, type=1
  libbpf: section .data, size 0, link 0, flags 3, type=1
  libbpf: section .bss, size 0, link 0, flags 3, type=8
  libbpf: section func=sys_write, size 104, link 0, flags 6, type=1
  libbpf: found program func=sys_write
  libbpf: section .relfunc=sys_write, size 16, link 10, flags 0, type=9
  libbpf: section maps, size 16, link 0, flags 3, type=1
  libbpf: maps in [bpf_relocation_test]: 16 bytes
  libbpf: section license, size 4, link 0, flags 3, type=1
  libbpf: license of [bpf_relocation_test] is GPL
  libbpf: section version, size 4, link 0, flags 3, type=1
  libbpf: kernel version of [bpf_relocation_test] is 40400
  libbpf: section .symtab, size 144, link 1, flags 0, type=2
  libbpf: map 0 is "my_table"
  libbpf: collecting relocating info for: 'func=sys_write'
  libbpf: Program 'func=sys_write' contains non-map related relo data pointing to section 65522
  bpf: failed to load buffer
  Compile BPF program failed.
  test child finished with 0
  ---- end ----
  Test BPF filter subtest 2: Ok

[1] https://llvm.org/bugs/show_bug.cgi?id=26243

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1453715801-7732-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-26 12:11:01 -03:00
Wang Nan 7b6982ce4b perf test: Add libbpf relocation checker
There's a bug in LLVM that it can generate unneeded relocation
information. See [1] and [2]. Libbpf should check the target section of
a relocation symbol.

This patch adds a testcase which references a global variable (BPF
doesn't support global variables). Before fixing libbpf, the new test
case can be loaded into kernel, the global variable acts like the first
map. It is incorrect.

Result:

  # ~/perf test BPF
  37: Test BPF filter                                          :
  37.1: Test basic BPF filtering                               : Ok
  37.2: Test BPF prologue generation                           : Ok
  37.3: Test BPF relocation checker                            : FAILED!

  # ~/perf test -v BPF
  ...
  libbpf: loading object '[bpf_relocation_test]' from buffer
  libbpf: section .strtab, size 126, link 0, flags 0, type=3
  libbpf: section .text, size 0, link 0, flags 6, type=1
  libbpf: section .data, size 0, link 0, flags 3, type=1
  libbpf: section .bss, size 0, link 0, flags 3, type=8
  libbpf: section func=sys_write, size 104, link 0, flags 6, type=1
  libbpf: found program func=sys_write
  libbpf: section .relfunc=sys_write, size 16, link 10, flags 0, type=9
  libbpf: section maps, size 16, link 0, flags 3, type=1
  libbpf: maps in [bpf_relocation_test]: 16 bytes
  libbpf: section license, size 4, link 0, flags 3, type=1
  libbpf: license of [bpf_relocation_test] is GPL
  libbpf: section version, size 4, link 0, flags 3, type=1
  libbpf: kernel version of [bpf_relocation_test] is 40400
  libbpf: section .symtab, size 144, link 1, flags 0, type=2
  libbpf: map 0 is "my_table"
  libbpf: collecting relocating info for: 'func=sys_write'
  libbpf: relocation: insn_idx=7
  Success unexpectedly: libbpf error when dealing with relocation
  test child finished with -1
  ---- end ----
  Test BPF filter subtest 2: FAILED!

[1] https://llvm.org/bugs/show_bug.cgi?id=26243
[2] https://patchwork.ozlabs.org/patch/571385/

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1453715801-7732-2-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-26 12:10:55 -03:00
Arnaldo Carvalho de Melo ab414dcda8 perf test: Fixup aliases checking in the 'vmlinux matches kallsyms' test
There are cases where looking at just the next and prev entries is not
enough, like with:

  $ readelf -sW /usr/lib/debug/lib/modules/4.3.3-301.fc23.x86_64/vmlinux | grep ffffffff81065ec0
   4979: ffffffff81065ec0 53 FUNC  LOCAL  DEFAULT 1 try_to_free_pud_page
   4980: ffffffff81065ec0 53 FUNC  LOCAL  DEFAULT 1 try_to_free_pte_page
   4981: ffffffff81065ec0 53 FUNC  LOCAL  DEFAULT 1 try_to_free_pmd_page

So just search by name to see if the symbol is in kallsyms.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-jj1vlljg7ol4i713l60rt5ai@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-26 11:52:52 -03:00
Arnaldo Carvalho de Melo 8acd3da03c perf machine: Introduce machine__find_kernel_symbol_by_name()
To be used in the 'vmlinux matches kallsyms' 'perf test'  entry.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-m56g1853lz2c6nhnqxibq4jd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-26 11:52:51 -03:00
Namhyung Kim 4056132e10 perf hists browser: Offer non-symbol specific menu options for --sort without 'sym'
Now that we check more strictly what each of the menu entries need, we
can stop bailing out when 'sym' is not in the --sort order, instead we
let each option be added if what it needs is present.

This way, for instance, we can run scripts on all samples, see DSO map
details when 'dso' is in the --sort provided, etc.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>,
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1452960197-5323-9-git-send-email-namhyung@kernel.org
[ Carved out from a  larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-26 11:52:51 -03:00
Namhyung Kim d9695d9f93 perf hists browser: Be a bit more strict about presenting CPU socket zoom
For consistency with the other sort order checks.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>,
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1452960197-5323-9-git-send-email-namhyung@kernel.org
[ Carved out from a  larger patch, moved check to add_socket_opt() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-26 11:52:50 -03:00
Namhyung Kim b1447a54f5 perf hists browser: Offer 'Zoom into DSO'/'Map details' only when sort order has 'dso'
We can't offer a zoom into DSO when a bucket (struct hist_entry) may
have samples for more than one DSO, i.e. when 'dso' is not part of
the sort order, ditto for 'Map details', fix it.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>,
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1452960197-5323-9-git-send-email-namhyung@kernel.org
[ Carved out from a  larger patch, moved check to add_{dso,map}_opt() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-26 11:52:50 -03:00
Namhyung Kim c221acb0f9 perf hists browser: Only offer symbol scripting when a symbol is under the cursor
When this feature was introduced a check was made if there was a
resolved symbol under the cursor, it got lost in commit ea7cd59233
("perf hists browser: Split popup menu actions - part 2"), reinstate it.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>,
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: ea7cd59233 ("perf hists browser: Split popup menu actions - part 2")
Link: http://lkml.kernel.org/r/1452960197-5323-9-git-send-email-namhyung@kernel.org
[ Carved out from a  larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-26 11:52:49 -03:00
Namhyung Kim 2eafd410e6 perf hists browser: Only 'Zoom into thread' only when sort order has 'pid'
We can't offer a zoom into thread when a bucket (struct hist_entry) may
have samples for more than one thread, i.e. when 'pid' is not part of
the sort order, fix it.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>,
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1452960197-5323-9-git-send-email-namhyung@kernel.org
[ Carved out from a  larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-26 11:52:49 -03:00
Namhyung Kim cfd92dadc5 perf sort: Provide a way to find out if per-thread bucketing is in place
Now the UI browsers will be able to offer thread related operations only
if the thread is part of the sort order in use, i.e. if hist_entry stats
are all for a single thread.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>,
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1452960197-5323-9-git-send-email-namhyung@kernel.org
[ Carved out from a  larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-26 11:52:49 -03:00
Taeung Song 485311d978 perf config: Document 'hist.percentage' variable in man page
Explain 'hist.percentage' variable.

Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1452253193-30502-7-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-26 11:52:48 -03:00
Taeung Song 3b97629d13 perf config: Document variables for 'annotate' section in man page
Explain 'annotate' section and its variables.

'hide_src_code', 'use_offset', 'jump_arrows',
'show_linenr', 'show_nr_jump' and 'show_total_period'.

Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1452253193-30502-5-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-26 11:52:48 -03:00
Taeung Song 2733525b8c perf config: Document 'buildid.dir' variable in man page
Explain 'buildid.dir' variable.

Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1452253193-30502-4-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-26 11:52:47 -03:00
Taeung Song 3fa9f40718 perf config: Document variables for 'tui' and 'gtk' sections in man page
Explain 'tui' and 'gtk' sections and these variables.

'top', 'report' and 'annotate'

Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1452253193-30502-3-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-26 11:52:47 -03:00
Taeung Song 89debf1787 perf config: Document variables for 'colors' section in man page
Explain 'colors' section and its variables, used for The variables for
customizing the colors used in the output for the 'report', 'top' and
'annotate' in the TUI, those are:

'top', 'medium', 'normal', 'selected',
'jump_arrows', 'addr' and 'root'.

Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1452253193-30502-2-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-26 11:52:46 -03:00
Taeung Song 78ce08dfbd perf annotate: Rename 'colors.code' to 'colors.jump_arrows'
USe 'jump_arrows' config name instead of 'code' on 'colors' section.
'colors.code' config is only for jump arrows on assembly code listings
i.e.

    │     ┌──jmp    1333
    │     │  xchg   %ax,%ax
    │     │  mov    %r15,%r10
    │     └─→cmp    %r15,%r14

But this config name seems unfit.

 'jump_arrows' is more descriptive than 'code'.

Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1452240971-25418-1-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-26 11:52:46 -03:00
Ben Hutchings 3379e0c3ef perf tools: Document the perf sysctls
perf_event_paranoid was only documented in source code and a perf error
message.  Copy the documentation from the error message to
Documentation/sysctl/kernel.txt.

perf_cpu_time_max_percent was already documented but missing from the
list at the top, so add it there.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-doc@vger.kernel.org
Link: http://lkml.kernel.org/r/20160119213515.GG2637@decadent.org.uk
[ Remove reference to external Documentation file, provide info inline, as before ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-26 11:52:45 -03:00
Namhyung Kim 1f7c254132 perf hists: Cleanup filtering functions
The hists__filter_by_xxx functions share same logic with different
filters.  Factor out the common code into the hists__filter_by_type.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1453252521-24398-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-26 11:52:45 -03:00
Namhyung Kim c84a5d1671 perf hists: Remove parent filter check in DSO filter function
The --exclude-other option sets HIST_FILTER__PARENT bit and it's only
set when a hist entry was created.  DSO filters don't change this so no
need to have the check in hists__filter_by_dso() IMHO.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1453252521-24398-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-26 11:52:44 -03:00
Jiri Olsa 86a2cf3123 perf stat: Making several helper functions static
There's no need for the following functions to be global:

  perf_evsel__reset_stat_priv
  perf_evsel__alloc_stat_priv
  perf_evsel__free_stat_priv
  perf_evsel__alloc_prev_raw_counts
  perf_evsel__free_prev_raw_counts
  perf_evsel__alloc_stats

They all ended up in util/stat.c, and they no longer need to be called
from outside this object.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453290995-18485-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-26 11:52:43 -03:00
Jiri Olsa 403567217d perf symbols: Do not read symbols/data from device files
With mem sampling we could get data source within mapped device file.
Processing such sample would block during report phase on trying to read
the device file.

Chacking for device files and skip the processing if it's detected.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453290995-18485-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-26 11:52:43 -03:00