Check the variable that was most recently initialized.
The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression x, y, f, g, e, m;
statement S1,S2,S3,S4;
@@
x = f(...);
if (\(<+...x...+>\&e\)) S1 else S2
(
x = g(...);
|
m = g(...,&x,...);
|
y = g(...);
*if (e)
S3 else S4
)
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Tegra194 BPMP only implements 5 channels (4 to BPMP, 1 to CCPLEX),
and they are not placed contiguously in memory. The current channel
management in the BPMP driver does not support this.
Simplify and refactor the channel management such that only one atomic
transmit channel and one receive channel are supported, and channels
are not required to be placed contiguously in memory. The same
configuration also works on T186 so we end up with less code.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tegra power management firmware running on the co-processor (BPMP)
implements a simple pseudo file system akin to debugfs. The file
system can be used for debugging purposes to examine and change the
status of selected resources controlled by the firmware (such as
clocks, resets, voltages, powergates, ...).
Add support to "mirror" the firmware's file system to debugfs. At
boot, query firmware for a list of all possible files and create
corresponding debugfs entries. Read/write of individual files is
implemented by sending a Message ReQuest (MRQ) that passes the full
file path name and data to firmware via DRAM.
Signed-off-by: Timo Alho <talho@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Expose and export the tegra_bpmp_mrq_return() function for use by
drivers outside the core BPMP driver. This function is used to reply to
messages originating from the BPMP, which is required in the thermal
driver.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Response messages from Tegra BPMP firmware contain an error return code
as the first word of payload. The error code is used to indicate
incorrectly formatted request message or use of non-existing resource
(clk, reset, powergate) identifier. Current implementation of
tegra_bpmp_transfer() ignores this code and does not pass it to caller.
Fix this by adding an extra struct member to tegra_bpmp_message and
populate that with return code.
Signed-off-by: Timo Alho <talho@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Subdevices of bpmp, such as bpmp-i2c, require the bpmp device's
drvdata to be set during their probe. Currently this is not always the
case. Fix this by calling platform_set_drvdata() earlier during bpmp's
probe.
Signed-off-by: Timo Alho <talho@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This contains a fix for missing semaphore release in error paths as well
as a bogus error code return in the BPMP firmware implementation.
-----BEGIN PGP SIGNATURE-----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=nTv2
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.13-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers
firmware: tegra: Changes for v4.13-rc1
This contains a fix for missing semaphore release in error paths as well
as a bogus error code return in the BPMP firmware implementation.
* tag 'tegra-for-4.13-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
firmware: tegra: Fix locking bugs in BPMP
Signed-off-by: Olof Johansson <olof@lixom.net>
There are a bunch of error paths were we don't unlock the bpmp->threaded
lock. Also if __tegra_bpmp_channel_write() fails then we returned
success instead of an error code.
Fixes: 983de5f971 ("firmware: tegra: Add BPMP support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The BPMP firmware, found on Tegra186 and later, provides an ABI that can
be used to enable and disable power to several power partitions in Tegra
SoCs. The ABI allows for enumeration of the available power partitions,
so the driver can be reused on future generations, provided the BPMP ABI
remains stable.
Based on work by Stefan Kristiansson <stefank@nvidia.com> and Mikko
Perttunen <mperttunen@nvidia.com>.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
We are going to split <linux/sched/clock.h> out of <linux/sched.h>, which
will have to be picked up from other headers and .c files.
Create a trivial placeholder <linux/sched/clock.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.
Include the new header in the files that are going to need it.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The Boot and Power Management Processor (BPMP) is a co-processor found
on Tegra SoCs. It is designed to handle the early stages of the boot
process and offload power management tasks (such as clocks, resets,
powergates, ...) as well as system control services.
Compared to the ARM SCPI, the services provided by BPMP are message-
based rather than method-based. The BPMP firmware driver provides the
services to transmit data to and receive data from the BPMP. Users can
also register a Message ReQuest (MRQ), for which a service routine will
be run when a corresponding event is received from the firmware.
A set of messages, called the BPMP ABI, are specified for a number of
different services provided by the BPMP (such as clocks or resets).
Based on work by Sivaram Nair <sivaramn@nvidia.com> and Joseph Lo
<josephl@nvidia.com>.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Julia Lawall