Pull RCU and LKMM changes from Paul E. McKenney:
- Documentation updates.
- Miscellaneous fixes.
- Dynamic tick (nohz) updates, perhaps most notably changes to
force the tick on when needed due to lengthy in-kernel execution
on CPUs on which RCU is waiting.
- Replace rcu_swap_protected() with rcu_prepace_pointer().
- Torture-test updates.
- Linux-kernel memory consistency model updates.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Both multi_cpu_stop() and set_state() access multi_stop_data::state
racily using plain accesses. These are subject to compiler
transformations which could break the intended behaviour of the code,
and this situation is detected by KCSAN on both arm64 and x86 (splats
below).
Improve matters by using READ_ONCE() and WRITE_ONCE() to ensure that the
compiler cannot elide, replay, or tear loads and stores.
In multi_cpu_stop() the two loads of multi_stop_data::state are expected to
be a consistent value, so snapshot the value into a temporary variable to
ensure this.
The state transitions are serialized by atomic manipulation of
multi_stop_data::num_threads, and other fields in multi_stop_data are not
modified while subject to concurrent reads.
KCSAN splat on arm64:
| BUG: KCSAN: data-race in multi_cpu_stop+0xa8/0x198 and set_state+0x80/0xb0
|
| write to 0xffff00001003bd00 of 4 bytes by task 24 on cpu 3:
| set_state+0x80/0xb0
| multi_cpu_stop+0x16c/0x198
| cpu_stopper_thread+0x170/0x298
| smpboot_thread_fn+0x40c/0x560
| kthread+0x1a8/0x1b0
| ret_from_fork+0x10/0x18
|
| read to 0xffff00001003bd00 of 4 bytes by task 14 on cpu 1:
| multi_cpu_stop+0xa8/0x198
| cpu_stopper_thread+0x170/0x298
| smpboot_thread_fn+0x40c/0x560
| kthread+0x1a8/0x1b0
| ret_from_fork+0x10/0x18
|
| Reported by Kernel Concurrency Sanitizer on:
| CPU: 1 PID: 14 Comm: migration/1 Not tainted 5.3.0-00007-g67ab35a199f4-dirty #3
| Hardware name: linux,dummy-virt (DT)
KCSAN splat on x86:
| write to 0xffffb0bac0013e18 of 4 bytes by task 19 on cpu 2:
| set_state kernel/stop_machine.c:170 [inline]
| ack_state kernel/stop_machine.c:177 [inline]
| multi_cpu_stop+0x1a4/0x220 kernel/stop_machine.c:227
| cpu_stopper_thread+0x19e/0x280 kernel/stop_machine.c:516
| smpboot_thread_fn+0x1a8/0x300 kernel/smpboot.c:165
| kthread+0x1b5/0x200 kernel/kthread.c:255
| ret_from_fork+0x35/0x40 arch/x86/entry/entry_64.S:352
|
| read to 0xffffb0bac0013e18 of 4 bytes by task 44 on cpu 7:
| multi_cpu_stop+0xb4/0x220 kernel/stop_machine.c:213
| cpu_stopper_thread+0x19e/0x280 kernel/stop_machine.c:516
| smpboot_thread_fn+0x1a8/0x300 kernel/smpboot.c:165
| kthread+0x1b5/0x200 kernel/kthread.c:255
| ret_from_fork+0x35/0x40 arch/x86/entry/entry_64.S:352
|
| Reported by Kernel Concurrency Sanitizer on:
| CPU: 7 PID: 44 Comm: migration/7 Not tainted 5.3.0+ #1
| Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marco Elver <elver@google.com>
Link: https://lkml.kernel.org/r/20191007104536.27276-1-mark.rutland@arm.com
When multi_cpu_stop() loops waiting for other tasks, it can trigger an RCU
CPU stall warning. This can be misleading because what is instead needed
is information on whatever task is blocking multi_cpu_stop(). This commit
therefore inserts an RCU quiescent state into the multi_cpu_stop()
function's waitloop.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
stop_machine is the only user left of cpu_relax_yield. Given that it
now has special semantics which are tied to stop_machine introduce a
weak stop_machine_yield function which architectures can override, and
get rid of the generic cpu_relax_yield implementation.
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
The stop_machine loop to advance the state machine and to wait for all
affected CPUs to check-in calls cpu_relax_yield in a tight loop until
the last missing CPUs acknowledged the state transition.
On a virtual system where not all logical CPUs are backed by real CPUs
all the time it can take a while for all CPUs to check-in. With the
current definition of cpu_relax_yield a diagnose 0x44 is done which
tells the hypervisor to schedule *some* other CPU. That can be any
CPU and not necessarily one of the CPUs that need to run in order to
advance the state machine. This can lead to a pretty bad diagnose 0x44
storm until the last missing CPU finally checked-in.
Replace the undirected cpu_relax_yield based on diagnose 0x44 with a
directed yield. Each CPU in the wait loop will pick up the next CPU
in the cpumask of stop_machine. The diagnose 0x9c is used to tell the
hypervisor to run this next CPU instead of the current one. If there
is only a limited number of real CPUs backing the virtual CPUs we
end up with the real CPUs passed around in a round-robin fashion.
[heiko.carstens@de.ibm.com]:
Use cpumask_next_wrap as suggested by Peter Zijlstra.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Based on 1 normalized pattern(s):
this file is released under the gplv2 and any later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 1 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190520170857.732920462@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull scheduler updates from Thomas Gleixner:
- Cleanup and improvement of NUMA balancing
- Refactoring and improvements to the PELT (Per Entity Load Tracking)
code
- Watchdog simplification and related cleanups
- The usual pile of small incremental fixes and improvements
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits)
watchdog: Reduce message verbosity
stop_machine: Reflow cpu_stop_queue_two_works()
sched/numa: Move task_numa_placement() closer to numa_migrate_preferred()
sched/numa: Use group_weights to identify if migration degrades locality
sched/numa: Update the scan period without holding the numa_group lock
sched/numa: Remove numa_has_capacity()
sched/numa: Modify migrate_swap() to accept additional parameters
sched/numa: Remove unused task_capacity from 'struct numa_stats'
sched/numa: Skip nodes that are at 'hoplimit'
sched/debug: Reverse the order of printing faults
sched/numa: Use task faults only if numa_group is not yet set up
sched/numa: Set preferred_node based on best_cpu
sched/numa: Simplify load_too_imbalanced()
sched/numa: Evaluate move once per node
sched/numa: Remove redundant field
sched/debug: Show the sum wait time of a task group
sched/fair: Remove #ifdefs from scale_rt_capacity()
sched/core: Remove get_cpu() from sched_fork()
sched/cpufreq: Clarify sugov_get_util()
sched/sysctl: Remove unused sched_time_avg_ms sysctl
...
When cpu_stop_queue_work() releases the lock for the stopper
thread that was queued into its wake queue, preemption is
enabled, which leads to the following deadlock:
CPU0 CPU1
sched_setaffinity(0, ...)
__set_cpus_allowed_ptr()
stop_one_cpu(0, ...) stop_two_cpus(0, 1, ...)
cpu_stop_queue_work(0, ...) cpu_stop_queue_two_works(0, ..., 1, ...)
-grabs lock for migration/0-
-spins with preemption disabled,
waiting for migration/0's lock to be
released-
-adds work items for migration/0
and queues migration/0 to its
wake_q-
-releases lock for migration/0
and preemption is enabled-
-current thread is preempted,
and __set_cpus_allowed_ptr
has changed the thread's
cpu allowed mask to CPU1 only-
-acquires migration/0 and migration/1's
locks-
-adds work for migration/0 but does not
add migration/0 to wake_q, since it is
already in a wake_q-
-adds work for migration/1 and adds
migration/1 to its wake_q-
-releases migration/0 and migration/1's
locks, wakes migration/1, and enables
preemption-
-since migration/1 is requested to run,
migration/1 begins to run and waits on
migration/0, but migration/0 will never
be able to run, since the thread that
can wake it is affine to CPU1-
Disable preemption in cpu_stop_queue_work() before queueing works for
stopper threads, and queueing the stopper thread in the wake queue, to
ensure that the operation of queueing the works and waking the stopper
threads is atomic.
Fixes: 0b26351b91 ("stop_machine, sched: Fix migrate_swap() vs. active_balance() deadlock")
Signed-off-by: Prasad Sodagudi <psodagud@codeaurora.org>
Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: peterz@infradead.org
Cc: matt@codeblueprint.co.uk
Cc: bigeasy@linutronix.de
Cc: gregkh@linuxfoundation.org
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1533329766-4856-1-git-send-email-isaacm@codeaurora.org
Co-Developed-by: Isaac J. Manjarres <isaacm@codeaurora.org>
This commit:
9fb8d5dc4b ("stop_machine, Disable preemption when waking two stopper threads")
does not fully address the race condition that can occur
as follows:
On one CPU, call it CPU 3, thread 1 invokes
cpu_stop_queue_two_works(2, 3,...), and the execution is such
that thread 1 queues the works for migration/2 and migration/3,
and is preempted after releasing the locks for migration/2 and
migration/3, but before waking the threads.
Then, On CPU 2, a kworker, call it thread 2, is running,
and it invokes cpu_stop_queue_two_works(1, 2,...), such that
thread 2 queues the works for migration/1 and migration/2.
Meanwhile, on CPU 3, thread 1 resumes execution, and wakes
migration/2 and migration/3. This means that when CPU 2
releases the locks for migration/1 and migration/2, but before
it wakes those threads, it can be preempted by migration/2.
If thread 2 is preempted by migration/2, then migration/2 will
execute the first work item successfully, since migration/3
was woken up by CPU 3, but when it goes to execute the second
work item, it disables preemption, calls multi_cpu_stop(),
and thus, CPU 2 will wait forever for migration/1, which should
have been woken up by thread 2. However migration/1 cannot be
woken up by thread 2, since it is a kworker, so it is affine to
CPU 2, but CPU 2 is running migration/2 with preemption
disabled, so thread 2 will never run.
Disable preemption after queueing works for stopper threads
to ensure that the operation of queueing the works and waking
the stopper threads is atomic.
Co-Developed-by: Prasad Sodagudi <psodagud@codeaurora.org>
Co-Developed-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org>
Signed-off-by: Prasad Sodagudi <psodagud@codeaurora.org>
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bigeasy@linutronix.de
Cc: gregkh@linuxfoundation.org
Cc: matt@codeblueprint.co.uk
Fixes: 9fb8d5dc4b ("stop_machine, Disable preemption when waking two stopper threads")
Link: http://lkml.kernel.org/r/1531856129-9871-1-git-send-email-isaacm@codeaurora.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When cpu_stop_queue_two_works() begins to wake the stopper threads, it does
so without preemption disabled, which leads to the following race
condition:
The source CPU calls cpu_stop_queue_two_works(), with cpu1 as the source
CPU, and cpu2 as the destination CPU. When adding the stopper threads to
the wake queue used in this function, the source CPU stopper thread is
added first, and the destination CPU stopper thread is added last.
When wake_up_q() is invoked to wake the stopper threads, the threads are
woken up in the order that they are queued in, so the source CPU's stopper
thread is woken up first, and it preempts the thread running on the source
CPU.
The stopper thread will then execute on the source CPU, disable preemption,
and begin executing multi_cpu_stop(), and wait for an ack from the
destination CPU's stopper thread, with preemption still disabled. Since the
worker thread that woke up the stopper thread on the source CPU is affine
to the source CPU, and preemption is disabled on the source CPU, that
thread will never run to dequeue the destination CPU's stopper thread from
the wake queue, and thus, the destination CPU's stopper thread will never
run, causing the source CPU's stopper thread to wait forever, and stall.
Disable preemption when waking the stopper threads in
cpu_stop_queue_two_works().
Fixes: 0b26351b91 ("stop_machine, sched: Fix migrate_swap() vs. active_balance() deadlock")
Co-Developed-by: Prasad Sodagudi <psodagud@codeaurora.org>
Signed-off-by: Prasad Sodagudi <psodagud@codeaurora.org>
Co-Developed-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: peterz@infradead.org
Cc: matt@codeblueprint.co.uk
Cc: bigeasy@linutronix.de
Cc: gregkh@linuxfoundation.org
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1530655334-4601-1-git-send-email-isaacm@codeaurora.org
Matt reported the following deadlock:
CPU0 CPU1
schedule(.prev=migrate/0) <fault>
pick_next_task() ...
idle_balance() migrate_swap()
active_balance() stop_two_cpus()
spin_lock(stopper0->lock)
spin_lock(stopper1->lock)
ttwu(migrate/0)
smp_cond_load_acquire() -- waits for schedule()
stop_one_cpu(1)
spin_lock(stopper1->lock) -- waits for stopper lock
Fix this deadlock by taking the wakeups out from under stopper->lock.
This allows the active_balance() to queue the stop work and finish the
context switch, which in turn allows the wakeup from migrate_swap() to
observe the context and complete the wakeup.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reported-by: Matt Fleming <matt@codeblueprint.co.uk>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180420095005.GH4064@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Use raw-locks in stop_machine() to allow locking in irq-off and
preempt-disabled regions on -RT. This also documents the possible locking
context in general.
[bigeasy: update patch description.]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lkml.kernel.org/r/20180423191635.6014-1-bigeasy@linutronix.de
Some call sites of stop_machine() are within a get_online_cpus() protected
region.
stop_machine() calls get_online_cpus() as well, which is possible in the
current implementation but prevents converting the hotplug locking to a
percpu rwsem.
Provide stop_machine_cpuslocked() to avoid nested calls to get_online_cpus().
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20170524081547.400700852@linutronix.de
Some time ago the following commit:
57f2ffe14f ("s390: remove diag 44 calls from cpu_relax()")
... stopped cpu_relax() on s390 yielding to the hypervisor.
As it turns out this made stop_machine() run really slow on virtualized
overcommited systems. For example the kprobes test during bootup took
several seconds instead of just running unnoticed with large guests.
Therefore, yielding was reintroduced with commit:
4d92f50249 ("s390: reintroduce diag 44 calls for cpu_relax()")
... but in fact the stop machine code seems to be the only place where
this yielding was really necessary. This place is probably the most
important one as it makes all but one guest CPUs wait for one guest CPU.
As we now have cpu_relax_yield(), we can use this in multi_cpu_stop().
For now lets only add it here. We can add it later in other places
when necessary.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Noam Camus <noamc@ezchip.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: virtualization@lists.linux-foundation.org
Cc: xen-devel@lists.xenproject.org
Link: http://lkml.kernel.org/r/1477386195-32736-3-git-send-email-borntraeger@de.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
stop_two_cpus() and stop_cpus() use stop_cpus_lock to avoid the deadlock,
we need to ensure that the stopper functions can't be queued "backwards"
from one another. This doesn't look nice; if we use lglock then we do not
really need stopper->lock, cpu_stop_queue_work() could use lg_local_lock()
under local_irq_save().
OTOH it would be even better to avoid lglock in stop_machine.c and remove
lg_double_lock(). This patch adds "bool stop_cpus_in_progress" set/cleared
by queue_stop_cpus_work(), and changes cpu_stop_queue_two_works() to busy
wait until it is cleared.
queue_stop_cpus_work() sets stop_cpus_in_progress = T lockless, but after
it queues a work on CPU1 it must be visible to stop_two_cpus(CPU1, CPU2)
which checks it under the same lock. And since stop_two_cpus() holds the
2nd lock too, queue_stop_cpus_work() can not clear stop_cpus_in_progress
if it is also going to queue a work on CPU2, it needs to take that 2nd
lock to do this.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20151121181148.GA433@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In case @cpu == smp_proccessor_id(), we can avoid a sleep+wakeup
cycle by doing a preemption.
Callers such as sched_exec() can benefit from this change.
Signed-off-by: Cheng Chao <cs.os.kernel@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: akpm@linux-foundation.org
Cc: chris@chris-wilson.co.uk
Cc: tj@kernel.org
Link: http://lkml.kernel.org/r/1473818510-6779-1-git-send-email-cs.os.kernel@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Suppose that stop_machine(fn) hangs because fn() hangs. In this case NMI
hard-lockup can be triggered on another CPU which does nothing wrong and
the trace from nmi_panic() won't help to investigate the problem.
And this change "fixes" the problem we (seem to) hit in practice.
- stop_two_cpus(0, 1) races with show_state_filter() running on CPU_0.
- CPU_1 already spins in MULTI_STOP_PREPARE state, it detects the soft
lockup and tries to report the problem.
- show_state_filter() enables preemption, CPU_0 calls multi_cpu_stop()
which goes to MULTI_STOP_DISABLE_IRQ state and disables interrupts.
- CPU_1 spends more than 10 seconds trying to flush the log buffer to
the slow serial console.
- NMI interrupt on CPU_0 (which now waits for CPU_1) calls nmi_panic().
Reported-by: Wang Shu <shuwang@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Anderson <anderson@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20160726185736.GB4088@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
stop_machine.o is only built if CONFIG_SMP=y, so this ifdef always
evaluates to true.
[akpm@linux-foundation.org: remove now-unneeded ifdef]
Reported-by: Valentin Rothberg <valentinrothberg@gmail.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently the full stop_machine() routine is only enabled on SMP if
module unloading is enabled, or if the CPUs are hotpluggable. This
leads to configurations where stop_machine() is broken as it will then
only run the callback on the local CPU with irqs disabled, and not stop
the other CPUs or run the callback on them.
For example, this breaks MTRR setup on x86 in certain configs since
ea8596bb2d ("kprobes/x86: Remove unused text_poke_smp() and
text_poke_smp_batch() functions") as the MTRR is only established on the
boot CPU.
This patch removes the Kconfig option for STOP_MACHINE and uses the SMP
and HOTPLUG_CPU config options to compile the correct stop_machine() for
the architecture, removing the false dependency on MODULE_UNLOAD in the
process.
Link: https://lkml.org/lkml/2014/10/8/124
References: https://bugs.freedesktop.org/show_bug.cgi?id=84794
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Pranith Kumar <bobby.prani@gmail.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Iulia Manda <iulia.manda21@gmail.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Chuck Ebbert <cebbert.lkml@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
1. Change this code to use preempt_count_inc/preempt_count_dec; this way
it works even if CONFIG_PREEMPT_COUNT=n, and we avoid the unnecessary
__preempt_schedule() check (stop_sched_class is not preemptible).
And this makes clear that we only want to make preempt_count() != 0
for __might_sleep() / schedule_debug().
2. Change WARN_ONCE() to use %pf to print the function name and remove
kallsyms_lookup/ksym_buf.
3. Move "int ret" into the "if (work)" block, this looks more consistent.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Milos Vyletel <milos@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20151115193332.GA8281@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Change cpu_stop_queue_work() and cpu_stopper_thread() to check done != NULL
before cpu_stop_signal_done(done). This makes the code more clean imo, note
that cpu_stopper_thread() has to do this check anyway.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Milos Vyletel <milos@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20151115193329.GA8274@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Change queue_stop_cpus_work() to return true if it queues at least one
work, this means that the caller should wait.
__stop_cpus() can check the value returned by queue_stop_cpus_work() and
avoid done.executed, just like stop_one_cpu() does.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Milos Vyletel <milos@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20151115193323.GA8262@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Change stop_one_cpu() to return -ENOENT if cpu_stop_queue_work() fails.
Otherwise we know that ->executed must be true after wait_for_completion()
so we can just return done.ret.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Milos Vyletel <milos@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20151115193320.GA8259@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Change cpu_stop_queue_work() to return true if the work was queued and
change stop_one_cpu_nowait() to return the result of cpu_stop_queue_work().
This makes it more useful, for example now you can alloc cpu_stop_work for
stop_one_cpu_nowait() and free it in the callback or if stop_one_cpu_nowait()
fails, currently this is impossible because you can't know if @fn will be
called or not.
Also, this allows to kill cpu_stop_done->executed, see the next changes.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Milos Vyletel <milos@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20151117170523.GA13955@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Now that stop_two_cpus() path does not check cpu_active() we can remove
preempt_disable(), it was only needed to ensure that stop_machine() can
not be called after we observe cpu_active() == T and before we queue the
new work.
Also, turn the pointless and confusing ->executed check into WARN_ON().
We know that both works must be executed, otherwise we have a bug. And
in fact I think that done->executed should die, see the next changes.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Milos Vyletel <milos@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20151115193314.GA8249@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
stop_one_cpu_nowait(fn) will crash the kernel if the callback returns
nonzero, work->done == NULL in this case.
This needs more cleanups, cpu_stop_signal_done() is called right after
we check done != NULL and it does the same check.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Milos Vyletel <milos@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20151115193311.GA8242@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The cpu_active() tests are not fundamentally part of stop_two_cpus(),
move then into the scheduler where they belong.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Now that we always use stop_machine_unpark() to wake the stopper
threas up, we can kill ->setup() and fold cpu_stop_unpark() into
stop_machine_unpark().
And we do not need stopper->lock to set stopper->enabled = true.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: heiko.carstens@de.ibm.com
Link: http://lkml.kernel.org/r/20151009160051.GA10169@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
1. Change smpboot_unpark_thread() to check ->selfparking, just
like smpboot_park_thread() does.
2. Introduce stop_machine_unpark() which sets ->enabled and calls
kthread_unpark().
3. Change smpboot_thread_call() and cpu_stop_init() to call
stop_machine_unpark() by hand.
This way:
- IMO the ->selfparking logic becomes more consistent.
- We can kill the smp_hotplug_thread->pre_unpark() method.
- We can easily unpark the stopper thread earlier. Say, we
can move stop_machine_unpark() from smpboot_thread_call()
to sched_cpu_active() as Peter suggests.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: heiko.carstens@de.ibm.com
Link: http://lkml.kernel.org/r/20151009160049.GA10166@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Change cpu_stop_queue_two_works() to ensure that both CPU's have
stopper->enabled == T or fail otherwise.
This way stop_two_cpus() no longer needs to check cpu_active() to
avoid the deadlock. This patch doesn't remove these checks, we will
do this later.
Note: we need to take both stopper->lock's at the same time, but this
will also help to remove lglock from stop_machine.c, so I hope this
is fine.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: heiko.carstens@de.ibm.com
Link: http://lkml.kernel.org/r/20151008170141.GA25537@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Preparation to simplify the review of the next change. Add two simple
helpers, __cpu_stop_queue_work() and cpu_stop_queue_two_works() which
simply take a bit of code from their callers.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: heiko.carstens@de.ibm.com
Link: http://lkml.kernel.org/r/20151008145134.GA18146@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
cpu_stop_queue_work() checks stopper->enabled before it queues the
work, but ->enabled == T can only guarantee cpu_stop_signal_done()
if we race with cpu_down().
This is not enough for stop_two_cpus() or stop_machine(), they will
deadlock if multi_cpu_stop() won't be called by one of the target
CPU's. stop_machine/stop_cpus are fine, they rely on stop_cpus_mutex.
But stop_two_cpus() has to check cpu_active() to avoid the same race
with hotplug, and this check is very unobvious and probably not even
correct if we race with cpu_up().
Change cpu_down() pass to clear ->enabled before cpu_stopper_thread()
flushes the pending ->works and returns with KTHREAD_SHOULD_PARK set.
Note also that smpboot_thread_call() calls cpu_stop_unpark() which
sets enabled == T at CPU_ONLINE stage, so this CPU can't go away until
cpu_stopper_thread() is called at least once. This all means that if
cpu_stop_queue_work() succeeds, we know that work->fn() will be called.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: heiko.carstens@de.ibm.com
Link: http://lkml.kernel.org/r/20151008145131.GA18139@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
cpu_stop_park() does cpu_stop_signal_done() but leaves the work on
stopper->works. The owner of this work can free/reuse this memory
right after that and corrupt the list, so if this CPU becomes online
again cpu_stopper_thread() will crash.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dave@stgolabs.net
Cc: der.herr@hofr.at
Cc: paulmck@linux.vnet.ibm.com
Cc: riel@redhat.com
Cc: viro@ZenIV.linux.org.uk
Link: http://lkml.kernel.org/r/20150630012958.GA23944@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cosmetic, but 'cpu_stop_fn_t' actually makes the code more readable and
it doesn't break cscope. And most of the declarations already use it.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dave@stgolabs.net
Cc: der.herr@hofr.at
Cc: paulmck@linux.vnet.ibm.com
Cc: riel@redhat.com
Cc: viro@ZenIV.linux.org.uk
Link: http://lkml.kernel.org/r/20150630012955.GA23937@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The only caller outside of stop_machine.c is _cpu_down(), it can use
stop_machine(). get_online_cpus() is fine under cpu_hotplug_begin().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dave@stgolabs.net
Cc: der.herr@hofr.at
Cc: paulmck@linux.vnet.ibm.com
Cc: riel@redhat.com
Cc: viro@ZenIV.linux.org.uk
Link: http://lkml.kernel.org/r/20150630012951.GA23934@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Jiri reported a machine stuck in multi_cpu_stop() with
migrate_swap_stop() as function and with the following src,dst cpu
pairs: {11, 4} {13, 11} { 4, 13}
4 11 13
cpuM: queue(4 ,13)
*Ma
cpuN: queue(13,11)
*N Na
*M Mb
cpuO: queue(11, 4)
*O Oa
*Nb
*Ob
Where *X denotes the cpu running the queueing of cpu-X and X[ab] denotes
the first/second queued work.
You'll observe the top of the workqueue for each cpu: 4,11,13 to be work
from cpus: M, O, N resp. IOW. deadlock.
Do away with the queueing trickery and introduce lg_double_lock() to
lock both CPUs and fully serialize the stop_two_cpus() callers instead
of the partial (and buggy) serialization we have now.
Reported-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20150605153023.GH19282@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We must use smp_call_function_single(.wait=1) for the
irq_cpu_stop_queue_work() to ensure the queueing is actually done under
stop_cpus_lock. Without this we could have dropped the lock by the time
we do the queueing and get the race we tried to fix.
Fixes: 7053ea1a34 ("stop_machine: Fix race between stop_two_cpus() and stop_cpus()")
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20140228123905.GK3104@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There is a race between stop_two_cpus, and the global stop_cpus.
It is possible for two CPUs to get their stopper functions queued
"backwards" from one another, resulting in the stopper threads
getting stuck, and the system hanging. This can happen because
queuing up stoppers is not synchronized.
This patch adds synchronization between stop_cpus (a rare operation),
and stop_two_cpus.
Reported-and-Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Link: http://lkml.kernel.org/r/20131101104146.03d1e043@annuminas.surriel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Remove get_online_cpus() usage from the scheduler; there's 4 sites that
use it:
- sched_init_smp(); where its completely superfluous since we're in
'early' boot and there simply cannot be any hotplugging.
- sched_getaffinity(); we already take a raw spinlock to protect the
task cpus_allowed mask, this disables preemption and therefore
also stabilizes cpu_online_mask as that's modified using
stop_machine. However switch to active mask for symmetry with
sched_setaffinity()/set_cpus_allowed_ptr(). We guarantee active
mask stability by inserting sync_rcu/sched() into _cpu_down.
- sched_setaffinity(); we don't appear to need get_online_cpus()
either, there's two sites where hotplug appears relevant:
* cpuset_cpus_allowed(); for the !cpuset case we use possible_mask,
for the cpuset case we hold task_lock, which is a spinlock and
thus for mainline disables preemption (might cause pain on RT).
* set_cpus_allowed_ptr(); Holds all scheduler locks and thus has
preemption properly disabled; also it already deals with hotplug
races explicitly where it releases them.
- migrate_swap(); we can make stop_two_cpus() do the heavy lifting for
us with a little trickery. By adding a sync_sched/rcu() after the
CPU_DOWN_PREPARE notifier we can provide preempt/rcu guarantees for
cpu_active_mask. Use these to validate that both our cpus are active
when queueing the stop work before we queue the stop_machine works
for take_cpu_down().
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Link: http://lkml.kernel.org/r/20131011123820.GV3081@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Introduce stop_two_cpus() in order to allow controlled swapping of two
tasks. It repurposes the stop_machine() state machine but only stops
the two cpus which we can do with on-stack structures and avoid
machine wide synchronization issues.
The ordering of CPUs is important to avoid deadlocks. If unordered then
two cpus calling stop_two_cpus on each other simultaneously would attempt
to queue in the opposite order on each CPU causing an AB-BA style deadlock.
By always having the lowest number CPU doing the queueing of works, we can
guarantee that works are always queued in the same order, and deadlocks
are avoided.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
[ Implemented deadlock avoidance. ]
Signed-off-by: Rik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Link: http://lkml.kernel.org/r/1381141781-10992-38-git-send-email-mgorman@suse.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo Molnar