this patch actually refactor mailbox implmentations, and
all below changes are needed together to fix all those mailbox
handshake issues exposured by heavey TDR test.
1)refactor all mailbox functions based on byte accessing for mb_control
reason is to avoid touching non-related bits when writing trn/rcv part of
mailbox_control, this way some incorrect INTR sent to hypervisor
side could be avoided, and it fixes couple handshake bug.
2)trans_msg function re-impled: put a invalid
logic before transmitting message to make sure the ACK bit is in
a clear status, otherwise there is chance that ACK asserted already
before transmitting message and lead to fake ACK polling.
(hypervisor side have some tricks to workaround ACK bit being corrupted
by VF FLR which hase an side effects that may make guest side ACK bit
asserted wrongly), and clear TRANS_MSG words after message transferred.
3)for mailbox_flr_work, it is also re-worked: it takes the mutex lock
first if invoked, to block gpu recover's participate too early while
hypervisor side is doing VF FLR. (hypervisor sends FLR_NOTIFY to guest
before doing VF FLR and sentds FLR_COMPLETE after VF FLR done, and
the FLR_NOTIFY will trigger interrupt to guest which lead to
mailbox_flr_work being invoked)
This can avoid the issue that mailbox trans msg being cleared by its VF FLR.
4)for mailbox_rcv_irq IRQ routine, it should only peek msg and schedule
mailbox_flr_work, instead of ACK to hypervisor itself, because FLR_NOTIFY
msg sent from hypervisor side doesn't need VF's ACK (this is because
VF's ACK would lead to hypervisor clear its trans_valid/msg, and this
would cause handshake bug if trans_valid/msg is cleared not due to
correct VF ACK but from a wrong VF ACK like this "FLR_NOTIFY" one)
This fixed handshake bug that sometimes GUEST always couldn't receive
"READY_TO_ACCESS_GPU" msg from hypervisor.
5)seperate polling time limite accordingly:
POLL ACK cost no more than 500ms
POLL MSG cost no more than 12000ms
POLL FLR finish cost no more than 500ms
6) we still need to set adev into in_gpu_reset mode after we received
FLR_NOTIFY from host side, this can prevent innocent app wrongly succesed
to open amdgpu dri device.
FLR_NOFITY is received due to an IDLE hang detected from hypervisor side
which indicating GPU is already die in this VF.
v2:
use MACRO as the offset of mailbox_control register
don't test if NOTIFY_CMPL event in rcv_msg since it won't
recieve that message anymore
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Pixel Ding <Pixel.Ding@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
mailbox registers can be accessed with a byte boundry according
to BIF team, so this patch prepares register byte access
and will be used by following patches.
Actually, for mailbox registers once the byte field is touched even not changed,
the mailbox behaves, so we need the byte width accessing to those sort of regs.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Pixel Ding <Pixel.Ding@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The vram type for dGPU is stored in umc_info while sys mem type
for APU is stored in integratedsysteminfo
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The commit d296278fd372003fc69588acfd0c0c5edbdf4874 added support for
detecting DDR4 but omitted the label that is printed out in
amdgpu_bo_init() resulting in a KASAN error.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The amdgpu_ucode_fini_bo should be called after gfx_v8_0_hw_fini,
or it will have KCQ disable failed issue.
For Tonga, as it firstly finishes SMC block, and the SMC hw fini
will call amdgpu_ucode_fini, which will lead the amdgpu_ucode_fini_bo
called before gfx_v8_0_hw_fini, this is incorrect.
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The amdgpu_pm_sysfs_fini should call before amdgpu_device_ip_fini,
or the adev->pm.dpm_enabled would be set to 0, then the device files
related to pp won't be removed by amdgpu_pm_sysfs_fini when unload
driver.
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We don't need the page array for prime shared BOs, stop allocating it.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Major points for this pull request:
- Add dGPU support for amdkfd initialization code and queue handling. It's
not complete support since the GPUVM part is missing (the under debate stuff).
- Enable PCIe atomics for dGPU if present
- Various adjustments to the amdgpu<-->amdkfd interface for dGPUs
- Refactor IOMMUv2 code to allow loading amdkfd without IOMMUv2 in the system
- Add HSA process eviction code in case of system memory pressure
- Various fixes and small changes
* tag 'drm-amdkfd-next-2018-03-11' of git://people.freedesktop.org/~gabbayo/linux: (24 commits)
uapi: Fix type used in ioctl parameter structures
drm/amdkfd: Implement KFD process eviction/restore
drm/amdkfd: Add GPUVM virtual address space to PDD
drm/amdkfd: Remove unaligned memory access
drm/amdkfd: Centralize IOMMUv2 code and make it conditional
drm/amdgpu: Add submit IB function for KFD
drm/amdgpu: Add GPUVM memory management functions for KFD
drm/amdgpu: add amdgpu_sync_clone
drm/amdgpu: Update kgd2kfd_shared_resources for dGPU support
drm/amdgpu: Add KFD eviction fence
drm/amdgpu: Remove unused kfd2kgd interface
drm/amdgpu: Fix wrong mask in get_atc_vmid_pasid_mapping_pasid
drm/amdgpu: Fix header file dependencies
drm/amdgpu: Replace kgd_mem with amdgpu_bo for kernel pinned gtt mem
drm/amdgpu: remove useless BUG_ONs
drm/amdgpu: Enable KFD initialization on dGPUs
drm/amdkfd: Add dGPU device IDs and device info
drm/amdkfd: Add dGPU support to kernel_queue_init
drm/amdkfd: Add dGPU support to the MQD manager
drm/amdkfd: Add dGPU support to the device queue manager
...
More stuff for 4.17. Highlights:
- More fixes for "wattman" like functionality (fine grained clk/voltage control)
- Add more power profile infrastucture (context based dpm)
- SR-IOV fixes
- Add iomem debugging interface for use with umr
- Powerplay and cgs cleanups
- DC fixes and cleanups
- ttm improvements
- Misc cleanups all over
* 'drm-next-4.17' of git://people.freedesktop.org/~agd5f/linux: (143 commits)
drm/amdgpu:Always save uvd vcpu_bo in VM Mode
drm/amdgpu:Correct max uvd handles
drm/amdgpu: replace iova debugfs file with iomem (v3)
drm/amd/display: validate plane format on primary plane
drm/amdgpu: Clean sdma wptr register when only enable wptr polling
drm/amd/amdgpu: re-add missing GC 9.1 and SDMA0 4.1 sh_mask header files
drm/amdgpu: give warning before sleep in kiq_r/wreg
drm/amdgpu: further mitigate workaround for i915
drm/amdgpu: drop gtt->adev
drm/amdgpu: add amdgpu_evict_gtt debugfs entry
drm/amd/pp: Add #ifdef checks for CONFIG_ACPI
drm/amd/pp: fix "Delete the wrapper layer of smu_allocate/free_memory"
drm/amd/pp: Drop wrapper functions for upper/lower_32_bits
drm/amdgpu: Delete cgs wrapper functions for gpu memory manager
drm/amd/pp: Delete the wrapper layer of smu_allocate/free_memory
drm/amd/pp: Remove cgs wrapper function for temperature update
Revert "drm/amd/pp: Add a pp feature mask bit for AutoWattman feature"
drm/amd/pp: Add auto power profilng switch based on workloads (v2)
drm/amd/pp: Revert gfx/compute profile switch sysfs
drm/amd/pp: Fix sclk in highest two levels when compute on smu7
...
When UVD is in VM mode, there is not uvd handle exchanged,
uvd.handles are always 0. So vcpu_bo always need save,
Otherwise amdgpu driver will fail during suspend/resume.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105021
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Max uvd handles should use adev->uvd.max_handles instead of
AMDGPU_MAX_UVD_HANDLES here.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
This allows access to pages allocated through the driver with optional
IOMMU mapping.
v2: Fix number of bytes copied and add write method
v3: drop check for kmap return
Original-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In dce110, the plane configuration is such that plane 0
or the primary plane should be rendered with only RGB data.
This patch adds the validation to ensure that no video data
is rendered on plane 0.
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The sdma wptr polling memory is not fast enough, then the sdma
wptr register will be random, and not equal to sdma rptr, which
will cause sdma engine hang when load driver, so clean up the sdma
wptr directly to fix this issue.
v2:add comment above the code and correct coding style
Reviewed-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These are required by umr to properly parse bitfield offsets.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexdeucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
to catch error that may schedule in atomic context early on
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Disable the workaround on imported BOs as well.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexdeucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We can use ttm->bdev instead.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexdeucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allow evicting all BOs from the GTT domain.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexdeucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix compiling error when CONFIG_ACPI not enabled.
Change-Id: I5f901adbc799c10b30e5ea79f8f44760e749fae1
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
For amdgpu_bo_create_kernel to work the handle must be NULL initialized,
otherwise we only try to pin and map the BO.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Rex Zhu <rezhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
replace smu_upper_32_bits/smu_lower_32_bits with
the standard kernel macros
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
delete those cgs interfaces:
amdgpu_cgs_alloc_gpu_mem
amdgpu_cgs_free_gpu_mem
amdgpu_cgs_gmap_gpu_mem
amdgpu_cgs_gunmap_gpu_mem
amdgpu_cgs_kmap_gpu_mem
amdgpu_cgs_kunmap_gpu_mem
Reviewed-by: Alex Deucher <alexdeucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
use amdgpu_bo_create/free_kernel instand.
Reviewed-by: Alex Deucher <alexdeucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexdeucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit e429ea87b2939c4cce1b439baf6d76535a0767f2.
Implement Workload Aware Dynamic power management instand of
AutoWattman feature in linux.
Reviewed-by: Alex Deucher <alexdeucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add power profiling mode dynamic switch based on the workloads.
Currently, support Cumpute, VR, Video, 3D,power saving with Cumpute
have highest prority, power saving have lowest prority.
in manual dpm mode, driver will stop auto switch, just save the client's
requests. user can set power profiling mode through sysfs.
when exit manual dpm mode, driver will response the client's requests.
switch based on the client's prority.
v2: squash in fixes from Rex
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The gfx/compute profiling mode switch is only for internally
test. Not a complete solution and unexpectly upstream.
so revert it.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Compute workload tends to be "bursty", Only tune the behavior of
nature dpm don't work well for most of such workloads. From test
results, Fix sclk in highest two levels can get better performance.
so add min sclk setting into the default cumpute workload policy on
smu7.
user still can change sclk range through sysfs pp_dpm_sclk
for better perf/watt.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It show what parameters can be configured to tune
the behavior of natural dpm for perf/watt on smu7.
user can select the mode per workload, but even the default per
workload settings are not bulletproof.
user can configure custom settings per different use case
for better perf or better perf/watt.
cat pp_power_profile_mode
NUM MODE_NAME SCLK_UP_HYST SCLK_DOWN_HYST SCLK_ACTIVE_LEVEL MCLK_UP_HYST MCLK_DOWN_HYST MCLK_ACTIVE_LEVEL
0 3D_FULL_SCREEN: 0 100 30 0 100 10
1 POWER_SAVING: 10 0 30 - - -
2 VIDEO: - - - 10 16 31
3 VR: 0 11 50 0 100 10
4 COMPUTE: 0 5 30 - - -
5 CUSTOM: 0 0 0 0 0 0
* CURRENT: 0 100 30 0 100 10
Under manual dpm level,
user can echo "0/1/2/3/4">pp_power_profile_mode
to select 3D_FULL_SCREEN/POWER_SAVING/VIDEO/VR/COMPUTE
mode.
echo "5 * * * * * * * *">pp_power_profile_mode
to set custom settings.
"5 * * * * * * * *" mean "CUSTOM enable_sclk SCLK_UP_HYST
SCLK_DOWN_HYST SCLK_ACTIVE_LEVEL enable_mclk MCLK_UP_HYST
MCLK_DOWN_HYST MCLK_ACTIVE_LEVEL"
if the parameter enable_sclk/enable_mclk is true,
driver will update the following parameters to dpm table.
if false, ignore the following parameters.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
use SW method to update DPM settings by updating SRAM
directly on CI.
Reviewed-by: Alex Deucher <alexdeucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
use SW method to update DPM settings by updating SRAM
directly on Tonga.
Reviewed-by: Alex Deucher <alexdeucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
use SW method to update DPM settings by updating SRAM
directly on Fiji.
Reviewed-by: Alex Deucher <alexdeucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Always set the graphics values to the max for the
asic type. E.g., some 1 RB chips are actually 1 RB chips,
others are actually harvested 2 RB chips.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=99353
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
v2: lock dpm level when update pptable by SW method
use SW method to update DPM settings by updating SRAM
directly on Polaris.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
it is used for adjust part of dpm settigs per workloads
to change the natural dpm behavior for better perf or perf/watt.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This features controls vega peak current protection to allow
for a wider compatibility with power supplies.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
used to set PccThrottleLevel and PccResidencyThreshold
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Get gpu info through adev directly in powerplay
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
it is required if a platform supports PCIe root complex
core voltage reduction. After receiving this notification,
SBIOS can apply default PCIe root complex power policy.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Include adev in powerplay instance.
so can visit adev directly instand of through cgs interface.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
use adev as input parameter to create powerplay instance
directly. delete cgs wrap layer for power play create.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
avoid build error:
drivers/gpu/drm/amd/amdgpu/../powerplay/inc/smu9_driver_if.h:342:3: error: redeclaration of enumerator ‘WM_COUNT’
WM_COUNT,
^
In file included from drivers/gpu/drm/amd/amdgpu/../display/dc/dm_services_types.h:32:0,
from drivers/gpu/drm/amd/amdgpu/../display/dc/dm_services.h:35,
from drivers/gpu/drm/amd/amdgpu/../display/modules/inc/mod_freesync.h:57,
from drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgpu_mode.h:48,
from drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgpu.h:55,
from drivers/gpu/drm/amd/amdgpu/../powerplay/inc/amd_powerplay.h:33,
from drivers/gpu/drm/amd/amdgpu/../powerplay/inc/smumgr.h:26,
from drivers/gpu/drm/amd/amdgpu/../powerplay/smumgr/vega10_smumgr.c:24:
drivers/gpu/drm/amd/amdgpu/../display/dc/dm_pp_smu.h:43:2: note: previous definition of ‘WM_COUNT’ was here
WM_COUNT,
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The below commit
"drm/atomic: Try to preserve the crtc enabled state in drm_atomic_remove_fb, v2"
introduces a slight behavioral change to rmfb. Instead of disabling a crtc
when the primary plane is disabled, it now preserves it.
This change leads to BUG hit while performing atomic commit on amd driver.
As a fix this patch ensures that we disable the CRTC's with NULL FB by returning
-EINVAL and hence triggering fall back to the old behavior and turning off the
crtc in atomic_remove_fb().
V2: Added error check for plane_state and removed sanity check for crtc.
Signed-off-by: Shirish S <shirish.s@amd.com>
Signed-off-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For consistency with other DCE generations.
HPD IRQs appear to be working fine.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu