The decrementation of acpi_device_bus_id->instance_no
in acpi_device_del() is incorrect, because it may cause
a duplicate instance number to be allocated next time
a device with the same acpi_device_bus_id is added.
Replace above mentioned approach by using IDA framework.
While at it, define the instance range to be [0, 4096).
Fixes: e49bd2dd5a ("ACPI: use PNPID:instance_no as bus_id of ACPI device")
Fixes: ca9dc8d42b ("ACPI / scan: Fix acpi_bus_id_list bookkeeping")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: 4.10+ <stable@vger.kernel.org> # 4.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When a DM device is first created it doesn't yet have an established
capacity, therefore the use of set_capacity_and_notify() should be
conditional given the potential for needless pr_info "detected
capacity change" noise even if capacity is 0.
One could argue that the pr_info() in set_capacity_and_notify() is
misplaced, but that position is not held uniformly.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: f64d9b2eac ("dm: use set_capacity_and_notify")
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Commit 24f6b6036c ("dm table: fix zoned iterate_devices based device
capability checks") triggered dm table load failure when dm-zoned device
is set up for zoned block devices and a regular device for cache.
The commit inverted logic of two callback functions for iterate_devices:
device_is_zoned_model() and device_matches_zone_sectors(). The logic of
device_is_zoned_model() was inverted then all destination devices of all
targets in dm table are required to have the expected zoned model. This
is fine for dm-linear, dm-flakey and dm-crypt on zoned block devices
since each target has only one destination device. However, this results
in failure for dm-zoned with regular cache device since that target has
both regular block device and zoned block devices.
As for device_matches_zone_sectors(), the commit inverted the logic to
require all zoned block devices in each target have the specified
zone_sectors. This check also fails for regular block device which does
not have zones.
To avoid the check failures, fix the zone model check and the zone
sectors check. For zone model check, introduce the new feature flag
DM_TARGET_MIXED_ZONED_MODEL, and set it to dm-zoned target. When the
target has this flag, allow it to have destination devices with any
zoned model. For zone sectors check, skip the check if the destination
device is not a zoned block device. Also add comments and improve an
error message to clarify expectations to the two checks.
Fixes: 24f6b6036c ("dm table: fix zoned iterate_devices based device capability checks")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Three optional parameters must be accepted at once in a DM verity table, e.g.:
(verity_error_handling_mode) (ignore_zero_block) (check_at_most_once)
Fix this to be possible by incrementing DM_VERITY_OPTS_MAX.
Signed-off-by: JeongHyeon Lee <jhs2.lee@samsung.com>
Fixes: 843f38d382 ("dm verity: add 'check_at_most_once' option to only validate hashes once")
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Because the PM-runtime status of the device is not updated in
__rpm_callback(), attempts to suspend the suppliers of the given
device triggered by the rpm_put_suppliers() call in there may
cause a supplier to be suspended completely before the status of
the consumer is updated to RPM_SUSPENDED, which is confusing.
To avoid that (1) modify __rpm_callback() to only decrease the
PM-runtime usage counter of each supplier and (2) make rpm_suspend()
try to suspend the suppliers after changing the consumer's status to
RPM_SUSPENDED, in analogy with the device's parent.
Link: https://lore.kernel.org/linux-pm/CAPDyKFqm06KDw_p8WXsM4dijDbho4bb6T4k50UqqvR1_COsp8g@mail.gmail.com/
Fixes: 21d5c57b37 ("PM / runtime: Use device links")
Reported-by: elaine.zhang <zhangqing@rock-chips.com>
Diagnosed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
io_provide_buffers_prep()'s "p->len * p->nbufs" to sign extension
problems. Not a huge problem as it's only used for access_ok() and
increases the checked length, but better to keep typing right.
Reported-by: Colin Ian King <colin.king@canonical.com>
Fixes: efe68c1ca8 ("io_uring: validate the full range of provided buffers for access")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/562376a39509e260d8532186a06226e56eb1f594.1616149233.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The "First Fault Register" (FFR) is an SVE register that mimics a
predicate register, but clears bits when a load or store fails to handle
an element of a vector. The supposed usage scenario is to initialise
this register (using SETFFR), then *read* it later on to learn about
elements that failed to load or store. Explicit writes to this register
using the WRFFR instruction are only supposed to *restore* values
previously read from the register (for context-switching only).
As the manual describes, this register holds only certain values, it:
"... contains a monotonic predicate value, in which starting from bit 0
there are zero or more 1 bits, followed only by 0 bits in any remaining
bit positions."
Any other value is UNPREDICTABLE and is not supposed to be "restored"
into the register.
The SVE test currently tries to write a signature pattern into the
register, which is *not* a canonical FFR value. Apparently the existing
setups treat UNPREDICTABLE as "read-as-written", but a new
implementation actually only stores canonical values. As a consequence,
the sve-test fails immediately when comparing the FFR value:
-----------
# ./sve-test
Vector length: 128 bits
PID: 207
Mismatch: PID=207, iteration=0, reg=48
Expected [cf00]
Got [0f00]
Aborted
-----------
Fix this by only populating the FFR with proper canonical values.
Effectively the requirement described above limits us to 17 unique
values over 16 bits worth of FFR, so we condense our signature down to 4
bits (2 bits from the PID, 2 bits from the generation) and generate the
canonical pattern from it. Any bits describing elements above the
minimum 128 bit are set to 0.
This aligns the FFR usage to the architecture and fixes the test on
microarchitectures implementing FFR in a more restricted way.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviwed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210319120128.29452-1-andre.przywara@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Memory hotplug may fail on systems with CONFIG_RANDOMIZE_BASE because the
linear map range is not checked correctly.
The start physical address that linear map covers can be actually at the
end of the range because of randomization. Check that and if so reduce it
to 0.
This can be verified on QEMU with setting kaslr-seed to ~0ul:
memstart_offset_seed = 0xffff
START: __pa(_PAGE_OFFSET(vabits_actual)) = ffff9000c0000000
END: __pa(PAGE_END - 1) = 1000bfffffff
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Fixes: 58284a901b ("arm64/mm: Validate hotplug range before creating linear mapping")
Tested-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20210216150351.129018-2-pasha.tatashin@soleen.com
Signed-off-by: Will Deacon <will@kernel.org>
The ppos points to a position in the old kernel memory (and in case of
arm64 in the crash kernel since elfcorehdr is passed as a segment). The
function should update the ppos by the amount that was read. This bug is
not exposed by accident, but other platforms update this value properly.
So, fix it in ARM64 version of elfcorehdr_read() as well.
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Fixes: e62aaeac42 ("arm64: kdump: provide /proc/vmcore file")
Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Link: https://lore.kernel.org/r/20210319205054.743368-1-pasha.tatashin@soleen.com
Signed-off-by: Will Deacon <will@kernel.org>
We recently converted arm64 to use arch_stack_walk() in commit:
5fc57df2f6 ("arm64: stacktrace: Convert to ARCH_STACKWALK")
The core stacktrace code expects that (when tracing the current task)
arch_stack_walk() starts a trace at its caller, and does not include
itself in the trace. However, arm64's arch_stack_walk() includes itself,
and so traces include one more entry than callers expect. The core
stacktrace code which calls arch_stack_walk() tries to skip a number of
entries to prevent itself appearing in a trace, and the additional entry
prevents skipping one of the core stacktrace functions, leaving this in
the trace unexpectedly.
We can fix this by having arm64's arch_stack_walk() begin the trace with
its caller. The first value returned by the trace will be
__builtin_return_address(0), i.e. the caller of arch_stack_walk(). The
first frame record to be unwound will be __builtin_frame_address(1),
i.e. the caller's frame record. To prevent surprises, arch_stack_walk()
is also marked noinline.
While __builtin_frame_address(1) is not safe in portable code, local GCC
developers have confirmed that it is safe on arm64. To find the caller's
frame record, the builtin can safely dereference the current function's
frame record or (in theory) could stash the original FP into another GPR
at function entry time, neither of which are problematic.
Prior to this patch, the tracing code would unexpectedly show up in
traces of the current task, e.g.
| # cat /proc/self/stack
| [<0>] stack_trace_save_tsk+0x98/0x100
| [<0>] proc_pid_stack+0xb4/0x130
| [<0>] proc_single_show+0x60/0x110
| [<0>] seq_read_iter+0x230/0x4d0
| [<0>] seq_read+0xdc/0x130
| [<0>] vfs_read+0xac/0x1e0
| [<0>] ksys_read+0x6c/0xfc
| [<0>] __arm64_sys_read+0x20/0x30
| [<0>] el0_svc_common.constprop.0+0x60/0x120
| [<0>] do_el0_svc+0x24/0x90
| [<0>] el0_svc+0x2c/0x54
| [<0>] el0_sync_handler+0x1a4/0x1b0
| [<0>] el0_sync+0x170/0x180
After this patch, the tracing code will not show up in such traces:
| # cat /proc/self/stack
| [<0>] proc_pid_stack+0xb4/0x130
| [<0>] proc_single_show+0x60/0x110
| [<0>] seq_read_iter+0x230/0x4d0
| [<0>] seq_read+0xdc/0x130
| [<0>] vfs_read+0xac/0x1e0
| [<0>] ksys_read+0x6c/0xfc
| [<0>] __arm64_sys_read+0x20/0x30
| [<0>] el0_svc_common.constprop.0+0x60/0x120
| [<0>] do_el0_svc+0x24/0x90
| [<0>] el0_svc+0x2c/0x54
| [<0>] el0_sync_handler+0x1a4/0x1b0
| [<0>] el0_sync+0x170/0x180
Erring on the side of caution, I've given this a spin with a bunch of
toolchains, verifying the output of /proc/self/stack and checking that
the assembly looked sound. For GCC (where we require version 5.1.0 or
later) I tested with the kernel.org crosstool binares for versions
5.5.0, 6.4.0, 6.5.0, 7.3.0, 7.5.0, 8.1.0, 8.3.0, 8.4.0, 9.2.0, and
10.1.0. For clang (where we require version 10.0.1 or later) I tested
with the llvm.org binary releases of 11.0.0, and 11.0.1.
Fixes: 5fc57df2f6 ("arm64: stacktrace: Convert to ARCH_STACKWALK")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen Jun <chenjun102@huawei.com>
Cc: Marco Elver <elver@google.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org> # 5.10.x
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210319184106.5688-1-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
When reloading driver, the head/tail pointer of CMDQ may be not at
position 0. Then during initialization of CMDQ, if head is reset first,
the firmware will start to handle CMDQ because the head is not equal to
the tail. The driver can reset tail first since the firmware will be
triggerred only by head. This bug is introduced by changing macros of
head/tail register without changing the order of initialization.
Fixes: 292b3352bd ("RDMA/hns: Adjust fields and variables about CMDQ tail/head")
Link: https://lore.kernel.org/r/1615602611-7963-1-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmBXj1oACgkQ8vlZVpUN
gaNnAwgAqZJ0S/Hctexs+v+DNvuyMxsA84pB/9KYlK2zgbBOyK5Iftxjqxb9Sb6j
6XKQOIaP2EXYJ0MDWW/fDMUHatlJvXUp+A9kLTiOLMDaRXbobQzb5jlGg9ZB/pBj
TzISrR4widiqJbVT2RFpO9O7B75BQqlpqFNfkF/yJ9CU/ozAw9x+voPcZK7q8/Sh
+DeQCARvgfx1ZipHGTYKjJdujA0qGcDfboYJpgId/gA5Zi76tx4NlbeXAM2QmRfh
zAd1NzFhqf7JmKDAWDdUeRnrDHcje9FLcAxo7Quq7YWxRKFsOCz9LTxazL2UIoa2
HvGpMD23qmISCLUyyrfnrpGPj/mD2w==
=xcuH
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Miscellaneous ext4 bug fixes for v5.12"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: initialize ret to suppress smatch warning
ext4: stop inode update before return
ext4: fix rename whiteout with fast commit
ext4: fix timer use-after-free on failed mount
ext4: fix potential error in ext4_do_update_inode
ext4: do not try to set xattr into ea_inode if value is empty
ext4: do not iput inode under running transaction in ext4_rename()
ext4: find old entry again if failed to rename whiteout
ext4: fix error handling in ext4_end_enable_verity()
ext4: fix bh ref count on error paths
fs/ext4: fix integer overflow in s_log_groups_per_flex
ext4: add reclaim checks to xattr code
ext4: shrink race window in ext4_should_retry_alloc()
When putting iMX5 into suspend, the following flow is
observed:
[ 70.023427] [<c07755f0>] (msm_atomic_commit_tail) from [<c06e7218>]
(commit_tail+0x9c/0x18c)
[ 70.031890] [<c06e7218>] (commit_tail) from [<c0e2920c>]
(drm_atomic_helper_commit+0x1a0/0x1d4)
[ 70.040627] [<c0e2920c>] (drm_atomic_helper_commit) from
[<c06e74d4>] (drm_atomic_helper_disable_all+0x1c4/0x1d4)
[ 70.050913] [<c06e74d4>] (drm_atomic_helper_disable_all) from
[<c0e2943c>] (drm_atomic_helper_suspend+0xb8/0x170)
[ 70.061198] [<c0e2943c>] (drm_atomic_helper_suspend) from
[<c06e84bc>] (drm_mode_config_helper_suspend+0x24/0x58)
In the i.MX5 case, priv->kms is not populated (as i.MX5 does not use any
of the Qualcomm display controllers), causing a NULL pointer
dereference in msm_atomic_commit_tail():
[ 24.268964] 8<--- cut here ---
[ 24.274602] Unable to handle kernel NULL pointer dereference at
virtual address 00000000
[ 24.283434] pgd = (ptrval)
[ 24.286387] [00000000] *pgd=ca212831
[ 24.290788] Internal error: Oops: 17 [#1] SMP ARM
[ 24.295609] Modules linked in:
[ 24.298777] CPU: 0 PID: 197 Comm: init Not tainted 5.11.0-rc2-next-20210111 #333
[ 24.306276] Hardware name: Freescale i.MX53 (Device Tree Support)
[ 24.312442] PC is at msm_atomic_commit_tail+0x54/0xb9c
[ 24.317743] LR is at commit_tail+0xa4/0x1b0
Fix the problem by calling drm_mode_config_helper_suspend/resume()
only when priv->kms is available.
Fixes: ca8199f134 ("drm/msm/dpu: ensure device suspend happens during PM sleep")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Linus correctly points out that this is both unnecessary and generates
much worse code on some archs as going from current to thread_info is
actually backwards - and obviously just wasteful, since the thread_info
is what we care about.
Since io_uring only operates on current for these operations, just use
test_thread_flag() instead. For io-wq, we can further simplify and use
tracehook_notify_signal() to handle the TIF_NOTIFY_SIGNAL work and clear
the flag. The latter isn't an actual bug right now, but it may very well
be in the future if we place other work items under TIF_NOTIFY_SIGNAL.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/io-uring/CAHk-=wgYhNck33YHKZ14mFB5MzTTk8gqXHcfj=RWTAXKwgQJgg@mail.gmail.com/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmBXahgQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgppMVEAC+Kn8AmNPbV7/AX3jfZYEh1UwyPetpJQ2m
FiWkXnuG85kM3UD12S5RYEYkHxzSob2d1yfZ+kL1TAkVJaz3FVoUU9ms0guXfCNb
l8k5fgK2zlegCyBIsPnouR/zV4Y/GJjf+tY0/c1e2Ovfl1zjCW486PvwjJzjMy8b
rXUi3MMKB3JPltML152qi9S1lJJuIHMB22ZUdTiyX+u4RtCzvGHGZmlpb4sw73RF
IRN7qBDYy5Pth+PCUBrhveIPmF/QSKhPHTarczIkgqSw/fSslsgEdBe88fxBDfbf
+WIaYifwqDongT4wkboXFUPTkSUlA+TbvnMW6dRZJTJvRspKz0SV4l+xC/QvT231
JqHqvRk2FkdVlpfXBvdVz94jLFiBJSl02QqTseQGbRdFY4BvxqkC15z4HkPdldJ8
QM2+6ZfzVWbzZkssgK42kTuDq9EX5Ks/+rOkIM/z2L5D00sbeeCVGCeNXf3uS7So
s7pskeTOLoXSvTpwzzEBEpJ6ebU698B1hx++Hjuy95Zifs2holkHXu36wvYmWFDm
CmxZ48waSQJq/emjbOSYfJthKc/TmaUzocsnMvSA5eoCmP445OUQJJTfifEj50if
/k0+XTi1DOrYHyy8R7a8T7xXDJIlMGY7fZyvmzopfRlJHnaHkeBfpbSaPCZXoAiJ
8T/mkYohAw==
=xaEf
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.12-2021-03-21' of git://git.kernel.dk/linux-block
Pull io_uring followup fixes from Jens Axboe:
- The SIGSTOP change from Eric, so we properly ignore that for
PF_IO_WORKER threads.
- Disallow sending signals to PF_IO_WORKER threads in general, we're
not interested in having them funnel back to the io_uring owning
task.
- Stable fix from Stefan, ensuring we properly break links for short
send/sendmsg recv/recvmsg if MSG_WAITALL is set.
- Catch and loop when needing to run task_work before a PF_IO_WORKER
threads goes to sleep.
* tag 'io_uring-5.12-2021-03-21' of git://git.kernel.dk/linux-block:
io_uring: call req_set_fail_links() on short send[msg]()/recv[msg]() with MSG_WAITALL
io-wq: ensure task is running before processing task_work
signal: don't allow STOP on PF_IO_WORKER threads
signal: don't allow sending any signals to PF_IO_WORKER threads
Here are some small staging and IIO driver fixes for 5.12-rc4.
They include:
- MAINTAINERS changes for the move of the staging mailing list
- comedi driver fixes to get request_irq() to work correctly
- counter driver fixes for reported issues with iio devices
- tiny iio driver fixes for reported issues.
All of these have been in linux-next with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYFc7qw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynn+QCffC5Zjkde07XiyTwksdVu6FaV2M4AnimVDEIG
u14uiz3TU1bd81gn1YLi
=47FR
-----END PGP SIGNATURE-----
Merge tag 'staging-5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging and IIO driver fixes from Greg KH:
"Some small staging and IIO driver fixes:
- MAINTAINERS changes for the move of the staging mailing list
- comedi driver fixes to get request_irq() to work correctly
- counter driver fixes for reported issues with iio devices
- tiny iio driver fixes for reported issues.
All of these have been in linux-next with no reported problems"
* tag 'staging-5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: vt665x: fix alignment constraints
staging: comedi: cb_pcidas64: fix request_irq() warn
staging: comedi: cb_pcidas: fix request_irq() warn
MAINTAINERS: move the staging subsystem to lists.linux.dev
MAINTAINERS: move some real subsystems off of the staging mailing list
iio: gyro: mpu3050: Fix error handling in mpu3050_trigger_handler
iio: hid-sensor-temperature: Fix issues of timestamp channel
iio: hid-sensor-humidity: Fix alignment issue of timestamp channel
counter: stm32-timer-cnt: fix ceiling miss-alignment with reload register
counter: stm32-timer-cnt: fix ceiling write max value
counter: stm32-timer-cnt: Report count function when SLAVE_MODE_DISABLED
iio: adc: ab8500-gpadc: Fix off by 10 to 3
iio:adc:stm32-adc: Add HAS_IOMEM dependency
iio: adis16400: Fix an error code in adis16400_initial_setup()
iio: adc: adi-axi-adc: add proper Kconfig dependencies
iio: adc: ad7949: fix wrong ADC result due to incorrect bit mask
iio: hid-sensor-prox: Fix scale not correct issue
iio:adc:qcom-spmi-vadc: add default scale to LR_MUX2_BAT_ID channel
Here are some small Thunderbolt and USB driver fixes for some reported
issues:
- thunderbolt fixes for minor problems
- typec fixes for power issues
- usb-storage quirk addition
- usbip bugfix
- dwc3 bugfix when stopping transfers
- cdnsp bugfix for isoc transfers
- gadget use-after-free fix
All have been in linux-next this week with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYFc8ag8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykrHwCfdSigXZ7IFgVcN+428ml0Ko/yG4AAn2Hkv2or
+ayuj/5GM/9I6Bt8aryk
=zzfw
-----END PGP SIGNATURE-----
Merge tag 'usb-5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB and Thunderbolt driver fixes from Greg KH:
"Here are some small Thunderbolt and USB driver fixes for some reported
issues:
- thunderbolt fixes for minor problems
- typec fixes for power issues
- usb-storage quirk addition
- usbip bugfix
- dwc3 bugfix when stopping transfers
- cdnsp bugfix for isoc transfers
- gadget use-after-free fix
All have been in linux-next this week with no reported issues"
* tag 'usb-5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: tcpm: Skip sink_cap query only when VDM sm is busy
usb: dwc3: gadget: Prevent EP queuing while stopping transfers
usb: typec: tcpm: Invoke power_supply_changed for tcpm-source-psy-
usb: typec: Remove vdo[3] part of tps6598x_rx_identity_reg struct
usb-storage: Add quirk to defeat Kindle's automatic unload
usb: gadget: configfs: Fix KASAN use-after-free
usbip: Fix incorrect double assignment to udc->ud.tcp_rx
usb: cdnsp: Fixes incorrect value in ISOC TRB
thunderbolt: Increase runtime PM reference count on DP tunnel discovery
thunderbolt: Initialize HopID IDAs in tb_switch_alloc()
plus a DocBook fix.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=IkEX
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2021-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Ingo Molnar:
"A change to robustify force-threaded IRQ handlers to always disable
interrupts, plus a DocBook fix.
The force-threaded IRQ handler change has been accelerated from the
normal schedule of such a change to keep the bad pattern/workaround of
spin_lock_irqsave() in handlers or IRQF_NOTHREAD as a kludge from
spreading"
* tag 'irq-urgent-2021-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Disable interrupts for force threaded handlers
genirq/irq_sim: Fix typos in kernel doc (fnode -> fwnode)
- another missing RT_PROP table related fix, to ensure that the efivarfs
pseudo filesystem fails gracefully if variable services are unsupported,
- use the correct alignment for literal EFI GUIDs,
- fix a use after unmap issue in the memreserve code
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=la6v
-----END PGP SIGNATURE-----
Merge tag 'efi-urgent-2021-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fixes from Ingo Molnar:
- another missing RT_PROP table related fix, to ensure that the
efivarfs pseudo filesystem fails gracefully if variable services
are unsupported
- use the correct alignment for literal EFI GUIDs
- fix a use after unmap issue in the memreserve code
* tag 'efi-urgent-2021-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: use 32-bit alignment for efi_guid_t literals
firmware/efi: Fix a use after bug in efi_mem_reserve_persistent
efivars: respect EFI_UNSUPPORTED return from firmware
devicetree-node lookups.
- Restore the IRQ2 ignore logic
- Fix get_nr_restart_syscall() to return the correct restart syscall number.
Split in a 4-patches set to avoid kABI breakage when backporting to dead
kernels.
-----BEGIN PGP SIGNATURE-----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=WfC4
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
"The freshest pile of shiny x86 fixes for 5.12:
- Add the arch-specific mapping between physical and logical CPUs to
fix devicetree-node lookups
- Restore the IRQ2 ignore logic
- Fix get_nr_restart_syscall() to return the correct restart syscall
number. Split in a 4-patches set to avoid kABI breakage when
backporting to dead kernels"
* tag 'x86_urgent_for_v5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apic/of: Fix CPU devicetree-node lookups
x86/ioapic: Ignore IRQ2 again
x86: Introduce restart_block->arch_data to remove TS_COMPAT_RESTART
x86: Introduce TS_COMPAT_RESTART to fix get_nr_restart_syscall()
x86: Move TS_COMPAT back to asm/thread_info.h
kernel, fs: Introduce and use set_restart_fn() and arch_set_restart_data()
Fix a possible stack corruption and subsequent DLPAR failure in the rpadlpar_io
PCI hotplug driver.
Two build fixes for uncommon configurations.
Thanks to Christophe Leroy, Tyrel Datwyler.
-----BEGIN PGP SIGNATURE-----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=SHvi
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix a possible stack corruption and subsequent DLPAR failure in the
rpadlpar_io PCI hotplug driver
- Two build fixes for uncommon configurations
Thanks to Christophe Leroy and Tyrel Datwyler.
* tag 'powerpc-5.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
PCI: rpadlpar: Fix potential drc_name corruption in store functions
powerpc: Force inlining of cpu_has_feature() to avoid build failure
powerpc/vdso32: Add missing _restgpr_31_x to fix build failure
Stop reporting SW_DOCK events because this breaks suspend-on-lid-close.
SW_DOCK should only be reported for docking stations, but all the DSDTs in
my DSDT collection which use the intel-vbtn code, always seem to use this
for 2-in-1s / convertibles and set SW_DOCK=1 when in laptop-mode (in tandem
with setting SW_TABLET_MODE=0).
This causes userspace to think the laptop is docked to a port-replicator
and to disable suspend-on-lid-close, which is undesirable.
Map the dock events to KEY_IGNORE to avoid this broken SW_DOCK reporting.
Note this may theoretically cause us to stop reporting SW_DOCK on some
device where the 0xCA and 0xCB intel-vbtn events are actually used for
reporting docking to a classic docking-station / port-replicator but
I'm not aware of any such devices.
Also the most important thing is that we only report SW_DOCK when it
reliably reports being docked to a classic docking-station without any
false positives, which clearly is not the case here. If there is a
chance of reporting false positives then it is better to not report
SW_DOCK at all.
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210321163513.72328-1-hdegoede@redhat.com
Cleanup create_attributes_level_sysfs_files():
1. There is no need to call sysfs_remove_file() on error, sysman_init()
will already call release_attributes_data() on failure which already does
this.
2. There is no need for the pr_debug() calls sysfs_create_file() should
never fail and if it does it will already complain about the problem
itself.
Fixes: e8a60aa740 ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems")
Cc: Divya Bharathi <Divya_Bharathi@dell.com>
Cc: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210321115901.35072-8-hdegoede@redhat.com
When either the attributes or the password interface is not found, then
unregister the 2 wmi drivers again and return -ENODEV from sysman_init().
Fixes: e8a60aa740 ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems")
Cc: Divya Bharathi <Divya_Bharathi@dell.com>
Cc: Mario Limonciello <mario.limonciello@dell.com>
Reported-by: Alexander Naumann <alexandernaumann@gmx.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210321115901.35072-7-hdegoede@redhat.com
Cleanup sysman_init() error-exit handling:
1. There is no need for the fail_reset_bios and fail_authentication_kset
eror-exit cases, these can be handled by release_attributes_data()
2. Rename all the labels from fail_what_failed, to err_what_to_cleanup
this is the usual way to name these and avoids the need to rename
them when extra steps are added.
Fixes: e8a60aa740 ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems")
Cc: Divya Bharathi <Divya_Bharathi@dell.com>
Cc: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210321115901.35072-6-hdegoede@redhat.com
All calls of init_bios_attributes() will result in a
goto fail_create_group if they fail, which calls
release_attributes_data().
So there is no need to call release_attributes_data() from
init_bios_attributes() on failure itself.
Fixes: e8a60aa740 ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems")
Cc: Divya Bharathi <Divya_Bharathi@dell.com>
Cc: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210321115901.35072-5-hdegoede@redhat.com
During some of the error-exit paths it is possible that
release_attributes_data() will get called multiple times,
which results in exit_foo_attributes() getting called multiple
times.
Make it safe to call exit_foo_attributes() multiple times,
avoiding double-free()s in this case.
Note that release_attributes_data() really should only be called
once during error-exit paths. This will be fixed in a separate patch
and it is good to have the exit_foo_attributes() functions modified
this way regardless.
Fixes: e8a60aa740 ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems")
Cc: Divya Bharathi <Divya_Bharathi@dell.com>
Cc: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210321115901.35072-4-hdegoede@redhat.com
It is possible for release_attributes_data() to get called when the
main_dir_kset has not been created yet, move the removal of the bios-reset
sysfs attr to under a if (main_dir_kset) check to avoid a NULL pointer
deref.
Fixes: e8a60aa740 ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems")
Cc: Divya Bharathi <Divya_Bharathi@dell.com>
Cc: Mario Limonciello <mario.limonciello@dell.com>
Reported-by: Alexander Naumann <alexandernaumann@gmx.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210321115901.35072-3-hdegoede@redhat.com
On some system the WMI GUIDs used by dell-wmi-sysman are present but there
are no enum type attributes, this causes init_bios_attributes() to return
-ENODEV, after which sysman_init() does a "goto fail_create_group" and then
calls release_attributes_data().
release_attributes_data() calls kset_unregister(wmi_priv.main_dir_kset);
but before this commit it was missing a "wmi_priv.main_dir_kset = NULL;"
statement; and after calling release_attributes_data() the sysman_init()
error handling does this:
if (wmi_priv.main_dir_kset) {
kset_unregister(wmi_priv.main_dir_kset);
wmi_priv.main_dir_kset = NULL;
}
Which causes a second kset_unregister(wmi_priv.main_dir_kset), leading to
a double-free, which causes a crash.
Add the missing "wmi_priv.main_dir_kset = NULL;" statement to
release_attributes_data() to fix this double-free crash.
Fixes: e8a60aa740 ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems")
Cc: Divya Bharathi <Divya_Bharathi@dell.com>
Cc: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210321115901.35072-2-hdegoede@redhat.com
Testing has shown that setting /sys/firmware/acpi/platform_profile to
"balanced" when /sys/bus/platform/devices/thinkpad_acpi/dytc_lapmode
reports 1, causes dytc_lapmode to get reset to 0 and then it becomes
stuck at 0 for aprox. 30 minutes even if the laptop is used on a lap.
Disabling CQL (when enabled) before issuing the DYTC_CMD_RESET to get
back to balanced mode and re-enabling it afterwards again, like the
code already does when switching to low-power / performance mode fixes
this.
Fixes: c3bfcd4c67 ("platform/x86: thinkpad_acpi: Add platform profile support")
Tested-by: Mark Pearson <markpearson@lenovo.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210321113108.7069-1-hdegoede@redhat.com
On many recent ThinkPad laptops, there's a new LED next to the ESC key,
that indicates the FnLock status.
When the Fn+ESC combo is pressed, FnLock is toggled, which causes the
Media Key functionality to change, making it so that the media keys
either perform their media key function, or function as an F-key by
default. The Fn key can be used the access the alternate function at any
time.
With the current linux kernel, the LED doens't change state if you press
the Fn+ESC key combo. However, the media key functionality *does*
change. This is annoying, since the LED will stay on if it was on during
bootup, and it makes it hard to keep track what the current state of the
FnLock is.
This patch calls an ACPI function, that gets the current media key
state, when the Fn+ESC key combo is pressed. Through testing it was
discovered that this function causes the LED to update correctly to
reflect the current state when this function is called.
The relevant ACPI calls are the following:
\_SB_.PCI0.LPC0.EC0_.HKEY.GMKS: Get media key state, returns 0x603 if the FnLock mode is enabled, and 0x602 if it's disabled.
\_SB_.PCI0.LPC0.EC0_.HKEY.SMKS: Set media key state, sending a 1 will enable FnLock mode, and a 0 will disable it.
Relevant discussion:
https://bugzilla.kernel.org/show_bug.cgi?id=207841https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1881015
Signed-off-by: Esteve Varela Colominas <esteve.varela@gmail.com>
Link: https://lore.kernel.org/r/20210315195823.23212-1-esteve.varela@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Without that it's not safe to use them in a linked combination with
others.
Now combinations like IORING_OP_SENDMSG followed by IORING_OP_SPLICE
should be possible.
We already handle short reads and writes for the following opcodes:
- IORING_OP_READV
- IORING_OP_READ_FIXED
- IORING_OP_READ
- IORING_OP_WRITEV
- IORING_OP_WRITE_FIXED
- IORING_OP_WRITE
- IORING_OP_SPLICE
- IORING_OP_TEE
Now we have it for these as well:
- IORING_OP_SENDMSG
- IORING_OP_SEND
- IORING_OP_RECVMSG
- IORING_OP_RECV
For IORING_OP_RECVMSG we also check for the MSG_TRUNC and MSG_CTRUNC
flags in order to call req_set_fail_links().
There might be applications arround depending on the behavior
that even short send[msg]()/recv[msg]() retuns continue an
IOSQE_IO_LINK chain.
It's very unlikely that such applications pass in MSG_WAITALL,
which is only defined in 'man 2 recvmsg', but not in 'man 2 sendmsg'.
It's expected that the low level sock_sendmsg() call just ignores
MSG_WAITALL, as MSG_ZEROCOPY is also ignored without explicitly set
SO_ZEROCOPY.
We also expect the caller to know about the implicit truncation to
MAX_RW_COUNT, which we don't detect.
cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/r/c4e1a4cc0d905314f4d5dc567e65a7b09621aab3.1615908477.git.metze@samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Mark the current task as running if we need to run task_work from the
io-wq threads as part of work handling. If that is the case, then return
as such so that the caller can appropriately loop back and reset if it
was part of a going-to-sleep flush.
Fixes: 3bfe610669 ("io-wq: fork worker threads from original task")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Just like we don't allow normal signals to IO threads, don't deliver a
STOP to a task that has PF_IO_WORKER set. The IO threads don't take
signals in general, and have no means of flushing out a stop either.
Longer term, we may want to look into allowing stop of these threads,
as it relates to eg process freezing. For now, this prevents a spin
issue if a SIGSTOP is delivered to the parent task.
Reported-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
They don't take signals individually, and even if they share signals with
the parent task, don't allow them to be delivered through the worker
thread. Linux does allow this kind of behavior for regular threads, but
it's really a compatability thing that we need not care about for the IO
threads.
Reported-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch adds rename whiteout support in fast commits. Note that the
whiteout object that gets created is actually char device. Which
imples, the function ext4_inode_journal_mode(struct inode *inode)
would return "JOURNAL_DATA" for this inode. This has a consequence in
fast commit code that it will make creation of the whiteout object a
fast-commit ineligible behavior and thus will fall back to full
commits. With this patch, this can be observed by running fast commits
with rename whiteout and seeing the stats generated by ext4_fc_stats
tracepoint as follows:
ext4_fc_stats: dev 254:32 fc ineligible reasons:
XATTR:0, CROSS_RENAME:0, JOURNAL_FLAG_CHANGE:0, NO_MEM:0, SWAP_BOOT:0,
RESIZE:0, RENAME_DIR:0, FALLOC_RANGE:0, INODE_JOURNAL_DATA:16;
num_commits:6, ineligible: 6, numblks: 3
So in short, this patch guarantees that in case of rename whiteout, we
fall back to full commits.
Amir mentioned that instead of creating a new whiteout object for
every rename, we can create a static whiteout object with irrelevant
nlink. That will make fast commits to not fall back to full
commit. But until this happens, this patch will ensure correctness by
falling back to full commits.
Fixes: 8016e29f43 ("ext4: fast commit recovery path")
Cc: stable@kernel.org
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20210316221921.1124955-1-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When filesystem mount fails because of corrupted filesystem we first
cancel the s_err_report timer reminding fs errors every day and only
then we flush s_error_work. However s_error_work may report another fs
error and re-arm timer thus resulting in timer use-after-free. Fix the
problem by first flushing the work and only after that canceling the
s_err_report timer.
Reported-by: syzbot+628472a2aac693ab0fcd@syzkaller.appspotmail.com
Fixes: 2d01ddc866 ("ext4: save error info to sb through journal if available")
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210315165906.2175-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If set_large_file = 1 and errors occur in ext4_handle_dirty_metadata(),
the error code will be overridden, go to out_brelse to avoid this
situation.
Signed-off-by: Shijie Luo <luoshijie1@huawei.com>
Link: https://lore.kernel.org/r/20210312065051.36314-1-luoshijie1@huawei.com
Cc: stable@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Syzbot report a warning that ext4 may create an empty ea_inode if set
an empty extent attribute to a file on the file system which is no free
blocks left.
WARNING: CPU: 6 PID: 10667 at fs/ext4/xattr.c:1640 ext4_xattr_set_entry+0x10f8/0x1114 fs/ext4/xattr.c:1640
...
Call trace:
ext4_xattr_set_entry+0x10f8/0x1114 fs/ext4/xattr.c:1640
ext4_xattr_block_set+0x1d0/0x1b1c fs/ext4/xattr.c:1942
ext4_xattr_set_handle+0x8a0/0xf1c fs/ext4/xattr.c:2390
ext4_xattr_set+0x120/0x1f0 fs/ext4/xattr.c:2491
ext4_xattr_trusted_set+0x48/0x5c fs/ext4/xattr_trusted.c:37
__vfs_setxattr+0x208/0x23c fs/xattr.c:177
...
Now, ext4 try to store extent attribute into an external inode if
ext4_xattr_block_set() return -ENOSPC, but for the case of store an
empty extent attribute, store the extent entry into the extent
attribute block is enough. A simple reproduce below.
fallocate test.img -l 1M
mkfs.ext4 -F -b 2048 -O ea_inode test.img
mount test.img /mnt
dd if=/dev/zero of=/mnt/foo bs=2048 count=500
setfattr -n "user.test" /mnt/foo
Reported-by: syzbot+98b881fdd8ebf45ab4ae@syzkaller.appspotmail.com
Fixes: 9c6e7853c5 ("ext4: reserve space for xattr entries/names")
Cc: stable@kernel.org
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Link: https://lore.kernel.org/r/20210305120508.298465-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Andy Shevchenko