Commit Graph

21697 Commits

Author SHA1 Message Date
Eric Dumazet 5de658f878 ipv6: fix RFC5722 comment
RFC5722 Section 4 was amended by Errata 3089

Our implementation did the right thing anyway...

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-30 12:58:51 -05:00
Tony Zelenoff 84920c1420 net: Allow ipv6 proxies and arp proxies be shown with iproute2
Add ability to return neighbour proxies list to caller if
it sent full ndmsg structure and has NTF_PROXY flag set.

Before this patch (and before iproute2 patches):
$ ip neigh add proxy 2001::1 dev eth0
$ ip -6 neigh show
$

After it and with applied iproute2 patches:
$ ip neigh add proxy 2001::1 dev eth0
$ ip -6 neigh show
2001::1 dev eth0  proxy
$

Compatibility with old versions of iproute2 is not broken,
kernel checks for incoming structure size and properly
works if old structure is came.

[v2]
* changed comments style.
* removed useless line with continue and curly bracket.
* changed incoming message size check from equal to more or
  equal.

CC: davem@davemloft.net
CC: kuznet@ms2.inr.ac.ru
CC: netdev@vger.kernel.org
CC: xemul@parallels.com
Signed-off-by: Tony Zelenoff <antonz@parallels.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-30 12:57:34 -05:00
David S. Miller c45a3dfb59 ipv6: Eliminate dst_get_neighbour_noref() usage in ip6_forward().
It's only used to get at neigh->primary_key, which in this context is
always going to be the same as rt->rt6i_gateway.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-27 21:00:08 -05:00
David S. Miller 4991969a10 ipv6: Remove neigh argument from ndisc_send_redirect()
Instead, compute it as-needed inside of that function using
dst_neigh_lookup().

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-27 21:00:08 -05:00
David S. Miller 5339ab8b1d ipv6: fib: Convert fib6_age() to dst_neigh_lookup().
In this specific situation we know we are dealing with a gatewayed route
and therefore rt6i_gateway is not going to be in6addr_any even in future
interpretations.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-27 21:00:08 -05:00
David S. Miller eb857186eb ipv6: ndisc: Convert to dst_neigh_lookup()
Now all code paths grab a local reference to the neigh, so if neigh
is not NULL we unconditionally release it at the end.  The old logic
would only release if we didn't have a non-NULL 'rt'.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-27 21:00:08 -05:00
David S. Miller 0ec8866204 ipv4: ip_gre: Convert to dst_neigh_lookup()
The conversion is very similar to that made to ipv6's SIT code.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-27 21:00:07 -05:00
David S. Miller a7563f342d ipv6: Use ipv6_addr_any()
Suggested by YOSHIFUJI Hideaki.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-26 16:29:16 -05:00
David S. Miller 1e2927b081 ipv6: sit: Convert to dst_neigh_lookup()
The only semantic difference is that we now hold a reference to the
neighbour and thus have to release it.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-26 15:23:21 -05:00
David S. Miller 39232973b7 ipv4/ipv6: Prepare for new route gateway semantics.
In the future the ipv4/ipv6 route gateway will take on two types
of values:

1) INADDR_ANY/IN6ADDR_ANY, for local network routes, and in this case
   the neighbour must be obtained using the destination address in
   ipv4/ipv6 header as the lookup key.

2) Everything else, the actual nexthop route address.

So if the gateway is not inaddr-any we use it, otherwise we must use
the packet's destination address.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-26 15:22:32 -05:00
Eric Dumazet 09e9b813d3 tcp: add LINUX_MIB_TCPRETRANSFAIL counter
It might be useful to get a counter of failed tcp_retransmit_skb()
calls.

Reported-by: Satoru Moriya <satoru.moriya@hds.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-26 13:51:00 -05:00
David S. Miller c54a457001 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2012-01-24 22:57:24 -05:00
David S. Miller 61d57f87f3 ip_gre: Fix bug added to ipgre_tunnel_xmit().
We can remove the rt_gateway == 0 check but we shouldn't
remove the 'dst' initialization too.

Noticed by Eric Dumazet.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-24 18:23:30 -05:00
David S. Miller 658c8d964e ipip: Fix bug added to ipip_tunnel_xmit().
We can remove the rt_gateway == 0 check but we shouldn't
remove the 'dst' initialization too.

Noticed by Eric Dumazet.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-24 18:18:05 -05:00
David S. Miller 496053f488 ipv4: Remove bogus checks of rt_gateway being zero.
It can never actually happen.  rt_gateway is either the fully resolved
flow lookup key's destination address, or the non-zero FIB entry gateway
address.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-24 18:08:46 -05:00
David S. Miller efc3dbc374 rds: Make rds_sock_lock BH rather than IRQ safe.
rds_sock_info() triggers locking warnings because we try to perform a
local_bh_enable() (via sock_i_ino()) while hardware interrupts are
disabled (via taking rds_sock_lock).

There is no reason for rds_sock_lock to be a hardware IRQ disabling
lock, none of these access paths run in hardware interrupt context.

Therefore making it a BH disabling lock is safe and sufficient to
fix this bug.

Reported-by: Kumar Sanghvi <kumaras@chelsio.com>
Reported-by: Josh Boyer <jwboyer@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-24 17:03:44 -05:00
Jesper Dangaard Brouer c452ed7077 net: flow_dissector.c missing include linux/export.h
The file net/core/flow_dissector.c seems to be missing
including linux/export.h.

Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-24 16:03:33 -05:00
Radu Iliescu 56ac11cf2f llc: Fix race condition in llc_ui_recvmsg
There is a race on sk_receive_queue between llc_ui_recvmsg and
sock_queue_rcv_skb.

Our current solution is to protect skb_eat in llc_ui_recvmsg
with the queue spinlock.

Signed-off-by: Radu Iliescu <riliescu@ixiacom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-24 15:33:19 -05:00
Michał Mirosław f80400a26a ethtool: allow ETHTOOL_GSSET_INFO for users
Allow ETHTOOL_GSSET_INFO ethtool ioctl() for unprivileged users.
ETHTOOL_GSTRINGS is already allowed, but is unusable without this one.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Acked-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-22 23:41:05 -05:00
David S. Miller b1cc16b8e6 bluetooth: hci: Fix type of "enable_hs" to bool.
Fixes:

net/bluetooth/hci_core.c: In function ‘__check_enable_hs’:
net/bluetooth/hci_core.c:2587:1: warning: return from incompatible pointer type [enabled by default]

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-22 15:08:46 -05:00
Glauber Costa 0e90b31f4b net: introduce res_counter_charge_nofail() for socket allocations
There is a case in __sk_mem_schedule(), where an allocation
is beyond the maximum, but yet we are allowed to proceed.
It happens under the following condition:

	sk->sk_wmem_queued + size >= sk->sk_sndbuf

The network code won't revert the allocation in this case,
meaning that at some point later it'll try to do it. Since
this is never communicated to the underlying res_counter
code, there is an inbalance in res_counter uncharge operation.

I see two ways of fixing this:

1) storing the information about those allocations somewhere
   in memcg, and then deducting from that first, before
   we start draining the res_counter,
2) providing a slightly different allocation function for
   the res_counter, that matches the original behavior of
   the network code more closely.

I decided to go for #2 here, believing it to be more elegant,
since #1 would require us to do basically that, but in a more
obscure way.

Signed-off-by: Glauber Costa <glommer@parallels.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
CC: Tejun Heo <tj@kernel.org>
CC: Li Zefan <lizf@cn.fujitsu.com>
CC: Laurent Chavey <chavey@google.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-22 15:08:46 -05:00
shawnlu 8a622e71f5 tcp: md5: using remote adress for md5 lookup in rst packet
md5 key is added in socket through remote address.
remote address should be used in finding md5 key when
sending out reset packet.

Signed-off-by: shawnlu <shawn.lu@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-22 15:08:45 -05:00
Paul Gortmaker bf0813bd28 pktgen: Fix unsigned function that is returning negative vals
Every call to num_args() immediately checks the return value for
less than zero, as it will return -EFAULT for a failed get_user()
call.  So it makes no sense for the function to be declared as an
unsigned long.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-22 15:08:44 -05:00
Yuchung Cheng 974c12360d tcp: detect loss above high_seq in recovery
Correctly implement a loss detection heuristic: New sequences (above
high_seq) sent during the fast recovery are deemed lost when higher
sequences are SACKed.

Current code does not catch these losses, because tcp_mark_head_lost()
does not check packets beyond high_seq. The fix is straight-forward by
checking packets until the highest sacked packet. In addition, all the
FLAG_DATA_LOST logic are in-effective and redundant and can be removed.

Update the loss heuristic comments. The algorithm above is documented
as heuristic B, but it is redundant too because heuristic A already
covers B.

Note that this change only marks some forward-retransmitted packets LOST.
It does NOT forbid TCP performing further CWR on new losses. A potential
follow-up patch under preparation is to perform another CWR on "new"
losses such as
1) sequence above high_seq is lost (by resetting high_seq to snd_nxt)
2) retransmission is lost.

Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-22 15:08:44 -05:00
Vijay Subramanian a42b4799c6 netem: Fix off-by-one bug in reordering
With netem reordering, a gap of N is supposed to reorder every Nth packet with
given reorder probability.  However, the code currently skips N packets and
reorders every (N+1)th packet.

Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-22 15:08:44 -05:00
Neal Cardwell 5a45f0086a tcp: fix undo after RTO for CUBIC
This patch fixes CUBIC so that cwnd reductions made during RTOs can be
undone (just as they already can be undone when using the default/Reno
behavior).

When undoing cwnd reductions, BIC-derived congestion control modules
were restoring the cwnd from last_max_cwnd. There were two problems
with using last_max_cwnd to restore a cwnd during undo:

(a) last_max_cwnd was set to 0 on state transitions into TCP_CA_Loss
(by calling the module's reset() functions), so cwnd reductions from
RTOs could not be undone.

(b) when fast_covergence is enabled (which it is by default)
last_max_cwnd does not actually hold the value of snd_cwnd before the
loss; instead, it holds a scaled-down version of snd_cwnd.

This patch makes the following changes:

(1) upon undo, revert snd_cwnd to ca->loss_cwnd, which is already, as
the existing comment notes, the "congestion window at last loss"

(2) stop forgetting ca->loss_cwnd on TCP_CA_Loss events

(3) use ca->last_max_cwnd to check if we're in slow start

Signed-off-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Sangtae Ha <sangtae.ha@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-20 14:17:26 -05:00
Neal Cardwell fc16dcd8c2 tcp: fix undo after RTO for BIC
This patch fixes BIC so that cwnd reductions made during RTOs can be
undone (just as they already can be undone when using the default/Reno
behavior).

When undoing cwnd reductions, BIC-derived congestion control modules
were restoring the cwnd from last_max_cwnd. There were two problems
with using last_max_cwnd to restore a cwnd during undo:

(a) last_max_cwnd was set to 0 on state transitions into TCP_CA_Loss
(by calling the module's reset() functions), so cwnd reductions from
RTOs could not be undone.

(b) when fast_covergence is enabled (which it is by default)
last_max_cwnd does not actually hold the value of snd_cwnd before the
loss; instead, it holds a scaled-down version of snd_cwnd.

This patch makes the following changes:

(1) upon undo, revert snd_cwnd to ca->loss_cwnd, which is already, as
the existing comment notes, the "congestion window at last loss"

(2) stop forgetting ca->loss_cwnd on TCP_CA_Loss events

(3) use ca->last_max_cwnd to check if we're in slow start

Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-20 14:17:26 -05:00
Francesco Ruggeri 013d97e9da net: race condition in ipv6 forwarding and disable_ipv6 parameters
There is a race condition in addrconf_sysctl_forward() and
addrconf_sysctl_disable().
These functions change idev->cnf.forwarding (resp. idev->cnf.disable_ipv6)
and then try to grab the rtnl lock before performing any actions.
If that fails they restore the original value and restart the syscall.
This creates race conditions if ipv6 code tries to access
these parameters, or if multiple instances try to do the same operation.
As an example of the former, if __ipv6_ifa_notify() finds a 0 in
idev->cnf.forwarding when invoked by addrconf_ifdown() it may not free
anycast addresses, ultimately resulting in the net_device not being freed.
This patch reads the user parameters into a temporary location and only
writes the actual parameters when the rtnl lock is acquired.
Tested in 2.6.38.8.
Signed-off-by: Francesco Ruggeri <fruggeri@aristanetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-18 16:38:34 -05:00
David S. Miller 1c659a4475 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless 2012-01-18 15:59:32 -05:00
Johannes Berg bc4934bc61 mac80211: fix work removal on deauth request
When deauth is requested while an auth or assoc
work item is in progress, we currently delete it
without regard for any state it might need to
clean up. Fix it by cleaning up for those items.

In the case Pontus found, the problem manifested
itself as such:

authenticate with 00:23:69:aa:dd:7b (try 1)
authenticated
failed to insert Dummy STA entry for the AP (error -17)
deauthenticating from 00:23:69:aa:dd:7b by local choice (reason=2)

It could also happen differently if the driver
uses the tx_sync callback.

We can't just call the ->done() method of the work
items because that will lock up due to the locking
in cfg80211. This fix isn't very clean, but that
seems acceptable since I have patches pending to
remove this code completely.

Cc: stable@vger.kernel.org
Reported-by: Pontus Fuchs <pontus.fuchs@gmail.com>
Tested-by: Pontus Fuchs <pontus.fuchs@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-18 14:38:06 -05:00
Javier Cardona 65e8b0ccb6 mac80211: Use the right headroom size for mesh mgmt frames
Use local->tx_headroom instad of local->hw.extra_tx_headroom.
local->tx_headroom is the max of hw.extra_tx_headroom required by the
driver and the headroom required by mac80211 for status reporting.  On
drivers where hw.extra_tx_headroom is smaller than what mac80211
requires (e.g. ath5k), we would not reserve sufficient buffer space to
report tx status.

Also, don't reserve local->tx_headroom + local->hw.extra_tx_headroom.

Reported-by: Simon Morgenthaler <s.morgenthaler@students.unibe.ch>
Reported-by: Kai Scharwies <kai@scharwies.de>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-18 14:38:06 -05:00
Johannes Berg 9446f3efc5 mac80211: fix debugfs key->station symlink
Since stations moved into a virtual interface
subdirectory, this link has been broken. Fix it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-18 14:38:05 -05:00
Linus Torvalds ccb19d263f Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (47 commits)
  tg3: Fix single-vector MSI-X code
  openvswitch: Fix multipart datapath dumps.
  ipv6: fix per device IP snmp counters
  inetpeer: initialize ->redirect_genid in inet_getpeer()
  net: fix NULL-deref in WARN() in skb_gso_segment()
  net: WARN if skb_checksum_help() is called on skb requiring segmentation
  caif: Remove bad WARN_ON in caif_dev
  caif: Fix typo in Vendor/Product-ID for CAIF modems
  bnx2x: Disable AN KR work-around for BCM57810
  bnx2x: Remove AutoGrEEEn for BCM84833
  bnx2x: Remove 100Mb force speed for BCM84833
  bnx2x: Fix PFC setting on BCM57840
  bnx2x: Fix Super-Isolate mode for BCM84833
  net: fix some sparse errors
  net: kill duplicate included header
  net: sh-eth: Fix build error by the value which is not defined
  net: Use device model to get driver name in skb_gso_segment()
  bridge: BH already disabled in br_fdb_cleanup()
  net: move sock_update_memcg outside of CONFIG_INET
  mwl8k: Fixing Sparse ENDIAN CHECK warning
  ...
2012-01-17 22:26:41 -08:00
Ben Pfaff 77676fdbd5 openvswitch: Fix multipart datapath dumps.
The logic to split up the list of datapaths into multiple Netlink messages
was simply wrong, causing the list to be terminated after the first part.
Only about the first 50 datapaths would be dumped.  This fixes the
problem.

Reported-by: Paul Ingram <paul@nicira.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-17 23:56:19 -05:00
Eric Dumazet 766e9f1be1 ipv6: fix per device IP snmp counters
In commit 4ce3c183fc (snmp: 64bit ipstats_mib for all arches), I forgot
to change the /proc/net/dev_snmp6/xxx output for IP counters.

percpu array is 64bit per counter but the folding still used the 'long'
variant, and output garbage on 32bit arches.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-17 23:56:18 -05:00
Dan Carpenter 10ec1bb7e9 inetpeer: initialize ->redirect_genid in inet_getpeer()
kmemcheck complains that ->redirect_genid doesn't get initialized.
Presumably it should be set to zero.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-17 15:52:12 -05:00
Michał Mirosław 65e9d2faab net: fix NULL-deref in WARN() in skb_gso_segment()
Bug was introduced in commit c8f44affb7.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-17 15:51:23 -05:00
Ben Hutchings 36c9247449 net: WARN if skb_checksum_help() is called on skb requiring segmentation
skb_checksum_help() has never done anything useful with skbs that
require segmentation.  Setting skb->ip_summed = CHECKSUM_NONE makes
them invalid and provokes a later WARNing in skb_gso_segment().

Passing such an skb to skb_checksum_help() indicates a bug, so we
should warn about it immediately.  Move the warning from
skb_gso_segment() into a shared function, and add gso_type and
gso_size to it.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-17 15:49:03 -05:00
David S. Miller 4144cb2ade Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless 2012-01-17 12:11:52 -05:00
sjur.brandeland@stericsson.com 59f608d84f caif: Remove bad WARN_ON in caif_dev
Remove WARN_ON and bad handling of SKB without destructor callback
in caif_flow_cb. SKB without destructor cannot be handled as an
error case.

Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-17 10:46:55 -05:00
sjur.brandeland@stericsson.com 3371bb3f7e caif: Fix typo in Vendor/Product-ID for CAIF modems
Fix typo for the Vendor/Product Id for ST-Ericsson CAIF modems.
Discovery is based on fixed USB vendor 0x04cc (ST-Ericsson),
product-id 0x230f (NCM).

Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-17 10:46:55 -05:00
Eric Dumazet 747465ef7a net: fix some sparse errors
make C=2 CF="-D__CHECK_ENDIAN__" M=net

And fix flowi4_init_output() prototype for sport

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-17 10:31:12 -05:00
Shan Wei 2b2d465631 net: kill duplicate included header
For net part, remove duplicate included header.

Signed-off-by: Shan Wei <davidshan@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-17 10:31:12 -05:00
Ben Hutchings e52ac3398c net: Use device model to get driver name in skb_gso_segment()
ethtool operations generally require the caller to hold RTNL and are
not safe to call in atomic context.  The device model provides this
information for most devices; we'll only lose it for some old ISA
drivers.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-17 10:31:12 -05:00
Eric Dumazet 27a429383b bridge: BH already disabled in br_fdb_cleanup()
br_fdb_cleanup() is run from timer interrupt, BH already masked.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Stephen Hemminger <shemminger@vyatta.com>
CC: Štefan Gula <steweg@gmail.com>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-17 10:17:32 -05:00
Helmut Schaa 544204733a mac80211: Fix possible race between sta_unblock and network softirq
All other code paths in sta_unblock synchronize with the network
softirq by using local_bh_disable/enable. Do the same around
ieee80211_sta_ps_deliver_wakeup.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-17 10:12:27 -05:00
Devendra Naga 8d9d399f14 net: remove version.h includes in net/openvswitch/
remove version.h includes in net/openswitch/ as reported by make versioncheck.

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-17 10:07:58 -05:00
Hiroaki SHIMODA 795d9a2538 bql: Fix inconsistency between file mode and attr method.
There is no store() method for inflight attribute in the
tx-<n>/byte_queue_limits sysfs directory.
So remove S_IWUSR bit.

Signed-off-by: Hiroaki SHIMODA <shimoda.hiroaki@gmail.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-17 10:05:55 -05:00
Jozsef Kadlecsik be94db9dda netfilter: ipset: dumping error triggered removing references twice
If there was a dumping error in the middle, the set-specific variable was
not zeroed out and thus the 'done' function of the dumping wrongly tried
to release the already released reference of the set. The already released
reference was caught by __ip_set_put and triggered a kernel BUG message.
Reported by Jean-Philippe Menil.

Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2012-01-17 10:52:55 +01:00
Jozsef Kadlecsik 088067f4f1 netfilter: ipset: autoload set type modules safely
Jan Engelhardt noticed when userspace requests a set type unknown
to the kernel, it can lead to a loop due to the unsafe type module
loading. The issue is fixed in this patch.

Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2012-01-17 10:52:46 +01:00