Commit Graph

2495 Commits

Author SHA1 Message Date
Alex Williamson 3504e47ffc PCI: Enable ASPM state clearing regardless of policy
Commit 2f671e2d allowed us to clear ASPM state when the FADT
tells us it isn't supported, but we don't put this into effect
if the aspm_policy is set to POLICY_POWERSAVE.  Enable the
state to be cleared regardless of policy.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-05-10 15:43:28 -07:00
Joerg Roedel 604c307bf4 Merge branches 'dma-debug/next', 'amd-iommu/command-cleanups', 'amd-iommu/ats' and 'amd-iommu/extended-features' into iommu/2.6.40
Conflicts:
	arch/x86/include/asm/amd_iommu_types.h
	arch/x86/kernel/amd_iommu.c
	arch/x86/kernel/amd_iommu_init.c
2011-05-10 10:25:23 +02:00
Dave Airlie 3448a19da4 vgaarb: use bridges to control VGA routing where possible.
So in a lot of modern systems, a GPU will always be below a parent bridge that won't share with any other GPUs. This means VGA arbitration on those GPUs can be controlled by using the bridge routing instead of io/mem decodes.

The problem is locating which GPUs share which upstream bridges. This patch attempts to identify all the GPUs which can be controlled via bridges, and ones that can't. This patch endeavours to work out the bridge sharing semantics.

When disabling GPUs via a bridge, it doesn't do irq callbacks or touch the io/mem decodes for the gpu.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-05-04 13:38:46 +10:00
Linus Torvalds ec616048ea Merge git://git.infradead.org/iommu-2.6
* git://git.infradead.org/iommu-2.6:
  intel_iommu: disable all VT-d PMRs when TXT launched
  intel-iommu: Fix get_domain_for_dev() error path
  intel-iommu: Unlink domain from iommu
  intel-iommu: Fix use after release during device attach
2011-04-21 09:56:35 -07:00
Joseph Cihula 51a63e67da intel_iommu: disable all VT-d PMRs when TXT launched
Intel VT-d Protected Memory Regions (PMRs) are supposed to be disabled,
on each VT-d engine, after DMA remapping is enabled on the engines.
This is because the behavior of having both enabled is not deterministic
and because, if TXT has been used to launch the kernel, the PMRs may be
programmed to cover memory regions that will be used for DMA.

Under some circumstances (certain quirks detected, lack of multiple
devices, etc.), the current code does not set up DMA remapping on some
VT-d engines.  In such cases it also skips disabling the PMRs.  This
causes failures when the kernel is launched with TXT (most often this
occurs on the graphics engine and results in colored vertical bars on
the display).

This patch detects when the kernel has been launched with TXT and then
disables the PMRs on all VT-d engines.  In some cases where the reason
that remapping is not being enabled is due to possible ACPI DMAR table
errors, the VT-d engine addresses may not be correct and thus not able
to be safely programmed even to disable PMRs.  Because part of the TXT
launch process is the verification of these addresses, it will always be
safe to disable PMRs if the TXT launch has succeeded and hence only
doing this in such cases.

Signed-off-by: Joseph Cihula <joseph.cihula@intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-04-21 13:51:40 +01:00
Linus Torvalds 97ddec65ff Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI: pci-label: Fix build failure when CONFIG_NLS is set to 'm' by allmodconfig
2011-04-19 12:46:32 -07:00
Randy Dunlap 8a226e00ee PCI: pci-label: Fix build failure when CONFIG_NLS is set to 'm' by allmodconfig
Create a kconfig option symbol for PCI_LABEL and enable it
when DMI || ACPI are enabled.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-04-12 08:39:02 -07:00
Rafael J. Wysocki 1f112cee07 PM / Hibernate: Introduce CONFIG_HIBERNATE_CALLBACKS
Xen save/restore is going to use hibernate device callbacks for
quiescing devices and putting them back to normal operations and it
would need to select CONFIG_HIBERNATION for this purpose.  However,
that also would cause the hibernate interfaces for user space to be
enabled, which might confuse user space, because the Xen kernels
don't support hibernation.  Moreover, it would be wasteful, as it
would make the Xen kernels include a substantial amount of code that
they would never use.

To address this issue introduce new power management Kconfig option
CONFIG_HIBERNATE_CALLBACKS, such that it will only select the code
that is necessary for the hibernate device callbacks to work and make
CONFIG_HIBERNATION select it.  Then, Xen save/restore will be able to
select CONFIG_HIBERNATE_CALLBACKS without dragging the entire
hibernate code along with it.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Tested-by: Shriram Rajagopalan <rshriram@cs.ubc.ca>
2011-04-11 22:54:42 +02:00
Linus Torvalds b42282e5a0 pci: fix PCI bus allocation alignment handling
In commit 13583b1659 ("PCI: refactor io size calculation code") Ram
had a thinko in the refactorization of the code: the end result used the
variable 'align' for the bus alignment, but the original code used
'min_align'.

Since then, another use of that 'align' variable got introduced by
commit c8adf9a3e8 ("PCI: pre-allocate additional resources to devices
only after successful allocation of essential resources.")

Fix both of those uses to use 'min_align' as they should.

Daniel Hellstrom <daniel@gaisler.com>
Acked-by: Ram Pai <linuxram@us.ibm.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-11 10:53:11 -07:00
Joerg Roedel 5cdede2408 PCI: Move ATS declarations in seperate header file
This patch moves the relevant declarations from the local
header file in drivers/pci to a more accessible locations so
that it can be used by the AMD IOMMU driver too.
The file is named pci-ats.h because support for the PCI PRI
capability will also be added there in a later patch-set.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-04-11 09:01:41 +02:00
Lucas De Marchi 25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Thomas Gleixner dced35aeb0 drivers: Final irq namespace conversion
Scripted with coccinelle.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-29 14:48:19 +02:00
Linus Torvalds 16c29dafcc Merge branch 'syscore' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6
* 'syscore' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
  Introduce ARCH_NO_SYSDEV_OPS config option (v2)
  cpufreq: Use syscore_ops for boot CPU suspend/resume (v2)
  KVM: Use syscore_ops instead of sysdev class and sysdev
  PCI / Intel IOMMU: Use syscore_ops instead of sysdev class and sysdev
  timekeeping: Use syscore_ops instead of sysdev class and sysdev
  x86: Use syscore_ops instead of sysdev classes and sysdevs
2011-03-25 21:07:59 -07:00
Linus Torvalds 5aafdea448 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI: Disable ASPM when _OSC control is not granted for PCIe services
  PCI: Changing ASPM policy, via /sys, to POWERSAVE could cause NMIs
  PCI: PCIe links may not get configured for ASPM under POWERSAVE mode
  PCI/ACPI: Report ASPM support to BIOS if not disabled from command line
2011-03-25 21:01:43 -07:00
Linus Torvalds 047f61c5d1 Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (42 commits)
  ACPI: minor printk format change in acpi_pad
  ACPI: make acpi_pad /sys output more readable
  ACPICA: Update version to 20110316
  ACPICA: Header support for SLIC table
  ACPI: Make sure the FADT is at least rev 2 before using the reset register
  ACPI: Bug compatibility for Windows on the ACPI reboot vector
  ACPICA: Fix access width for reset vector
  ACPI battery: fribble sysfs files from a resume notifier
  ACPI button: remove unused procfs I/F
  ACPI, APEI, Add PCIe AER error information printing support
  PCIe, AER, use pre-generated prefix in error information printing
  ACPI, APEI, Add ERST record ID cache
  ACPI: Use syscore_ops instead of sysdev class and sysdev
  ACPI: Remove the unused EC sysdev class
  ACPI: use __cpuinit for the acpi_processor_set_pdc() call tree
  ACPI: use __init where possible in processor driver
  Thermal_Framework-Fix_crash_during_hwmon_unregister
  ACPICA: Update version to 20110211.
  ACPICA: Add mechanism to defer _REG methods for some installed handlers
  ACPICA: Add support for FunctionalFixedHW in acpi_ut_get_region_name
  ...
2011-03-24 08:25:15 -07:00
Serge E. Hallyn 3486740a4f userns: security: make capabilities relative to the user namespace
- Introduce ns_capable to test for a capability in a non-default
  user namespace.
- Teach cap_capable to handle capabilities in a non-default
  user namespace.

The motivation is to get to the unprivileged creation of new
namespaces.  It looks like this gets us 90% of the way there, with
only potential uid confusion issues left.

I still need to handle getting all caps after creation but otherwise I
think I have a good starter patch that achieves all of your goals.

Changelog:
	11/05/2010: [serge] add apparmor
	12/14/2010: [serge] fix capabilities to created user namespaces
	Without this, if user serge creates a user_ns, he won't have
	capabilities to the user_ns he created.  THis is because we
	were first checking whether his effective caps had the caps
	he needed and returning -EPERM if not, and THEN checking whether
	he was the creator.  Reverse those checks.
	12/16/2010: [serge] security_real_capable needs ns argument in !security case
	01/11/2011: [serge] add task_ns_capable helper
	01/11/2011: [serge] add nsown_capable() helper per Bastian Blank suggestion
	02/16/2011: [serge] fix a logic bug: the root user is always creator of
		    init_user_ns, but should not always have capabilities to
		    it!  Fix the check in cap_capable().
	02/21/2011: Add the required user_ns parameter to security_capable,
		    fixing a compile failure.
	02/23/2011: Convert some macros to functions as per akpm comments.  Some
		    couldn't be converted because we can't easily forward-declare
		    them (they are inline if !SECURITY, extern if SECURITY).  Add
		    a current_user_ns function so we can use it in capability.h
		    without #including cred.h.  Move all forward declarations
		    together to the top of the #ifdef __KERNEL__ section, and use
		    kernel-doc format.
	02/23/2011: Per dhowells, clean up comment in cap_capable().
	02/23/2011: Per akpm, remove unreachable 'return -EPERM' in cap_capable.

(Original written and signed off by Eric;  latest, modified version
acked by him)

[akpm@linux-foundation.org: fix build]
[akpm@linux-foundation.org: export current_user_ns() for ecryptfs]
[serge.hallyn@canonical.com: remove unneeded extra argument in selinux's task_has_capability]
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Serge E. Hallyn <serge.hallyn@canonical.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Daniel Lezcano <daniel.lezcano@free.fr>
Acked-by: David Howells <dhowells@redhat.com>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Serge E. Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23 19:47:02 -07:00
Rafael J. Wysocki 134fac3f45 PCI / Intel IOMMU: Use syscore_ops instead of sysdev class and sysdev
The Intel IOMMU subsystem uses a sysdev class and a sysdev for
executing iommu_suspend() after interrupts have been turned off
on the boot CPU (during system suspend) and for executing
iommu_resume() before turning on interrupts on the boot CPU
(during system resume).  However, since both of these functions
ignore their arguments, the entire mechanism may be replaced with a
struct syscore_ops object which is simpler.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Joerg Roedel <joerg.roedel@amd.com>
2011-03-23 22:16:14 +01:00
Len Brown 02e2407858 Merge branch 'linus' into release
Conflicts:
	arch/x86/kernel/acpi/sleep.c

Signed-off-by: Len Brown <len.brown@intel.com>
2011-03-23 02:34:54 -04:00
Len Brown 25076246e8 Merge branch 'apei-release' into release 2011-03-22 01:41:47 -04:00
Huang Ying c413d76820 ACPI, APEI, Add PCIe AER error information printing support
The AER error information printing support is implemented in
drivers/pci/pcie/aer/aer_print.c.  So some string constants, functions
and macros definitions can be re-used without being exported.

The original PCIe AER error information printing function is not
re-used directly because the overall format is quite different.  And
changing the original printing format may make some original users'
scripts broken.

Signed-off-by: Huang Ying <ying.huang@intel.com>
CC: Jesse Barnes <jbarnes@virtuousgeek.org>
CC: Zhang Yanmin <yanmin.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-03-21 22:59:08 -04:00
Huang Ying b64a441465 PCIe, AER, use pre-generated prefix in error information printing
When printing PCIe AER error information, each line is prefixed with
PCIe device and driver information.  In original implementation, the
prefix is generated when each line is printed.  In fact, all lines
share the same prefix.  So this patch pre-generated the prefix, and
use that one when each line is printed.

In addition to common prefix can be pre-generated, the trailing white
spaces in string constants and NULLs in char * array constants can be
removed too.  These can reduce the object file size further.

The size of object file before and after changing is as follow:

           text    data     bss     dec
before:    3038       0       0    3038
after:     2118       0       0    2118

Signed-off-by: Huang Ying <ying.huang@intel.com>
CC: Jesse Barnes <jbarnes@virtuousgeek.org>
CC: Zhang Yanmin <yanmin.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-03-21 22:59:08 -04:00
Naga Chumbalkar eca67315e0 PCI: Disable ASPM when _OSC control is not granted for PCIe services
v3 -> v2: Added text to describe the problem
v2 -> v1: Split this patch from v1
v1	: Part of: http://marc.info/?l=linux-pci&m=130042212003242&w=2

Disable ASPM when no _OSC control for PCIe services is granted
by the BIOS. This is to protect systems with a buggy BIOS that
did not set the ACPI FADT "ASPM Controls" bit even though the
underlying HW can't do ASPM.

To turn "on" ASPM the minimum the BIOS needs to do:
1. Clear the ACPI FADT "ASPM Controls" bit.
2. Support _OSC appropriately

There is no _OSC Control bit for ASPM. However, we expect the BIOS to
support _OSC for a Root Bridge that originates a PCIe hierarchy. If this
is not the case - we are better off not enabling ASPM on that server.

Commit 852972acff (ACPI: Disable ASPM if the
Platform won't provide _OSC control for PCIe) describes the above scenario.
To quote verbatim from there:
[The PCI SIG documentation for the _OSC OS/firmware handshaking interface
states:

"If the _OSC control method is absent from the scope of a host bridge
device, then the operating system must not enable or attempt to use any
features defined in this section for the hierarchy originated by the host
bridge."

The obvious interpretation of this is that the OS should not attempt to use
PCIe hotplug, PME or AER - however, the specification also notes that an
_OSC method is *required* for PCIe hierarchies, and experimental validation
with An Alternative OS indicates that it doesn't use any PCIe functionality
if the _OSC method is missing. That arguably means we shouldn't be using
MSI or extended config space, but right now our problems seem to be limited
to vendors being surprised when ASPM gets enabled on machines when other
OSs refuse to do so. So, for now, let's just disable ASPM if the _OSC
method doesn't exist or refuses to hand over PCIe capability control.]

Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-03-21 09:41:08 -07:00
Naga Chumbalkar bbfa306a1e PCI: Changing ASPM policy, via /sys, to POWERSAVE could cause NMIs
v3 -> v2: Modified the text that describes the problem
v2 -> v1: Returned -EPERM
v1      : http://marc.info/?l=linux-pci&m=130013194803727&w=2

For servers whose hardware cannot handle ASPM the BIOS ought to set the
FADT bit shown below:
In Sec 5.2.9.3 (IA-PC Boot Arch. Flags) of ACPI4.0a Specification, please
see Table 5-11:
PCIe ASPM Controls: If set, indicates to OSPM that it must not enable
OPSM ASPM control on this platform.

However there are shipping servers whose BIOS did not set this bit. (An
example is the HP ProLiant DL385 G6. A Maintenance BIOS will fix that).
For such servers even if a call is made via pci_no_aspm(), based on _OSC
support in the BIOS, it may be too late because the ASPM code may have
already allocated and filled its "link_list".

So if a user sets the ASPM "policy" to "powersave" via /sys then
pcie_aspm_set_policy() will run through the "link_list" and re-configure
ASPM policy on devices that advertise ASPM L0s/L1 capability:
# echo powersave > /sys/module/pcie_aspm/parameters/policy
# cat /sys/module/pcie_aspm/parameters/policy
default performance [powersave]

That can cause NMIs since the hardware doesn't play well with ASPM:
[ 1651.906015] NMI: PCI system error (SERR) for reason b1 on CPU 0.
[ 1651.906015] Dazed and confused, but trying to continue

Ideally, the BIOS should have set that FADT bit in the first place but we
could be more robust - especially given the fact that Windows doesn't
cause NMIs in the above scenario.

There should be a sanity check to not allow a user to modify ASPM policy
when aspm_disabled is set.

Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-03-21 09:40:57 -07:00
Naga Chumbalkar 1a680b7c32 PCI: PCIe links may not get configured for ASPM under POWERSAVE mode
v3 -> v2: Moved ASPM enabling logic to pci_set_power_state()
v2 -> v1: Preserved the logic in pci_raw_set_power_state()
	: Added ASPM enabling logic after scanning Root Bridge
	: http://marc.info/?l=linux-pci&m=130046996216391&w=2
v1	: http://marc.info/?l=linux-pci&m=130013164703283&w=2

The assumption made in commit 41cd766b06
(PCI: Don't enable aspm before drivers have had a chance to veto it) that
pci_enable_device() will result in re-configuring ASPM when aspm_policy is
POWERSAVE is no longer valid.  This is due to commit
97c145f7c8 (PCI: read current power state
at enable time) which resets dev->current_state to D0. Due to this the
call to pcie_aspm_pm_state_change() is never made. Note the equality check
(below) that returns early:
./drivers/pci/pci.c: pci_raw_set_pci_power_state()
546         /* Check if we're already there */
547         if (dev->current_state == state)
548                 return 0;

Therefore OSPM never configures the PCIe links for ASPM to turn them "on".

Fix it by configuring ASPM from the pci_enable_device() code path. This
also allows a driver such as the e1000e networking driver a chance to
disable ASPM (L0s, L1), if need be, prior to enabling the device. A
driver may perform this action if the device is known to mis-behave
wrt ASPM.

Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-03-21 09:40:43 -07:00
Rafael J. Wysocki 8b8bae901c PCI/ACPI: Report ASPM support to BIOS if not disabled from command line
We need to distinguish the situation in which ASPM support is
disabled from the command line or through .config from the situation
in which it is disabled, because the hardware or BIOS can't handle
it.  In the former case we should not report ASPM support to the BIOS
through ACPI _OSC, but in the latter case we should do that.

Introduce pcie_aspm_support_enabled() that can be used by
acpi_pci_root_add() to determine whether or not it should report ASPM
support to the BIOS through _OSC.

Cc: stable@kernel.org
References: https://bugzilla.kernel.org/show_bug.cgi?id=29722
References: https://bugzilla.kernel.org/show_bug.cgi?id=20232
Reported-and-tested-by: Ortwin Glück <odi@odi.ch>
Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Tested-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-03-21 09:38:02 -07:00
Linus Torvalds 99759619b2 Merge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI: label: remove #include of ACPI header to avoid warnings
  PCI: label: Fix compilation error when CONFIG_ACPI is unset
  PCI: pre-allocate additional resources to devices only after successful allocation of essential resources.
  PCI: introduce reset_resource()
  PCI: data structure agnostic free list function
  PCI: refactor io size calculation code
  PCI: do not create quirk I/O regions below PCIBIOS_MIN_IO for ICH
  PCI hotplug: acpiphp: set current_state to D0 in register_slot
  PCI: Export ACPI _DSM provided firmware instance number and string name to sysfs
  PCI: add more checking to ICH region quirks
  PCI: aer-inject: Override PCIe AER Mask Registers
  PCI: fix tlan build when CONFIG_PCI is not enabled
  PCI: remove quirk for pre-production systems
  PCI: Avoid potential NULL pointer dereference in pci_scan_bridge
  PCI/lpc: irq and pci_ids patch for Intel DH89xxCC DeviceIDs
  PCI: sysfs: Fix failure path for addition of "vpd" attribute
2011-03-18 10:56:44 -07:00
Linus Torvalds 7b7adc4a01 Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/epip/linux-2.6-unicore32
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/epip/linux-2.6-unicore32: (40 commits)
  unicore32: rewrite arch-specific tlb.h to use asm-generic version
  unicore32: modify io_p2v and io_v2p macros, and adjust PKUNITY_mmio_BASEs
  unicore32: replace unicore32-specific iomap functions with generic lib implementation
  unicore32 machine related: add frame buffer driver for pkunity-v3 soc
  unicore32 machine related files: add i2c bus drivers for pkunity-v3 soc
  unicore32 io: redefine __REG(x) and re-use readl/writel funcs
  unicore32 i8042 upgrade and bugfix: adjust resource request region type
  unicore32 upgrade to v2.6.38-rc5: add one more paramter for pte_alloc_map call
  unicore32 i8042: adjust io funcs of i8042-unicore32io.h
  unicore32: rename PKUNITY_IOSPACE_BASE to PKUNITY_MMIO_BASE
  unicore32: modify function names and parameters for irq_chips
  unicore32: remove unused lines in arch/unicore32/include/asm/irq.h
  unicore32 time.c: change calculate method for clock_event_device
  unicore32: ADD MAINTAINER for unicore32 architecture
  unicore32 machine related files: ps2 driver
  unicore32 machine related files: pci bus handling
  unicore32 machine related files: hardware registers
  unicore32 machine related files: core files
  unicore32 additional architecture files: boot process
  unicore32 additional architecture files: low-level lib: misc
  ...

Acked-by: Arnd Bergmann <arnd@arndb.de>
2011-03-17 10:11:25 -07:00
GuanXuetao 700598cef8 unicore32 machine related files: pci bus handling
This patch implements arch-specific pci bus driver.

Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
2011-03-17 09:19:15 +08:00
Shyam_Iyer@Dell.com 65d8defe2e PCI: label: remove #include of ACPI header to avoid warnings
I found that including acpi/apci_drivers.h is not necessary and
introduces these warnings:

In file included from drivers/pci/pci-label.c:32:
include/acpi/acpi_drivers.h:103: warning: ‘struct acpi_device’ declared inside parameter list
include/acpi/acpi_drivers.h:103: warning: its scope is only this definition or declaration, which is probably not what you want
include/acpi/acpi_drivers.h:107: warning: ‘struct acpi_pci_root’ declared inside parameter list

Signed-off-by: Shyam Iyer <shyam_iyer@dell.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-03-16 10:24:34 -07:00
Narendra_K@Dell.com 07eefe1ca5 PCI: label: Fix compilation error when CONFIG_ACPI is unset
This patch fixes compilation error descibed below introduced by
the commit 6058989bad

drivers/pci/pci-label.c: In function ‘pci_create_firmware_label_files’:
drivers/pci/pci-label.c:366:2: error: implicit declaration of function ‘device_has_dsm’

Signed-off-by: Narendra K <narendra_k@dell.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-03-16 10:22:56 -07:00
Linus Torvalds fc82e1d59a Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: (21 commits)
  PM / Hibernate: Reduce autotuned default image size
  PM / Core: Introduce struct syscore_ops for core subsystems PM
  PM QoS: Make pm_qos settings readable
  PM / OPP: opp_find_freq_exact() documentation fix
  PM: Documentation/power/states.txt: fix repetition
  PM: Make system-wide PM and runtime PM treat subsystems consistently
  PM: Simplify kernel/power/Kconfig
  PM: Add support for device power domains
  PM: Drop pm_flags that is not necessary
  PM: Allow pm_runtime_suspend() to succeed during system suspend
  PM: Clean up PM_TRACE dependencies and drop unnecessary Kconfig option
  PM: Remove CONFIG_PM_OPS
  PM: Reorder power management Kconfig options
  PM: Make CONFIG_PM depend on (CONFIG_PM_SLEEP || CONFIG_PM_RUNTIME)
  PM / ACPI: Remove references to pm_flags from bus.c
  PM: Do not create wakeup sysfs files for devices that cannot wake up
  USB / Hub: Do not call device_set_wakeup_capable() under spinlock
  PM: Use appropriate printk() priority level in trace.c
  PM / Wakeup: Don't update events_check_enabled in pm_get_wakeup_count()
  PM / Wakeup: Make pm_save_wakeup_count() work as documented
  ...
2011-03-16 09:24:44 -07:00
Rafael J. Wysocki aa33860158 PM: Remove CONFIG_PM_OPS
After redefining CONFIG_PM to depend on (CONFIG_PM_SLEEP ||
CONFIG_PM_RUNTIME) the CONFIG_PM_OPS option is redundant and can be
replaced with CONFIG_PM.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-03-15 00:43:15 +01:00
Alex Williamson 2fe9723df8 intel-iommu: Fix get_domain_for_dev() error path
If we run out of domain_ids and fail iommu_attach_domain(), we
fall into domain_exit() without having setup enough of the
domain structure for this to do anything useful.  In fact, it
typically runs off into the weeds walking the bogus domain->devices
list.  Just free the domain.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Donald Dutile <ddutile@redhat.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Cc: stable@kernel.org
2011-03-12 14:37:53 +00:00
Alex Williamson a97590e56d intel-iommu: Unlink domain from iommu
When we remove a device, we unlink the iommu from the domain, but
we never do the reverse unlinking of the domain from the iommu.
This means that we never clear iommu->domain_ids, eventually leading
to resource exhaustion if we repeatedly bind and unbind a device
to a driver.  Also free empty domains to avoid a resource leak.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Donald Dutile <ddutile@redhat.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Cc: stable@kernel.org
2011-03-12 14:37:26 +00:00
Ram Pai c8adf9a3e8 PCI: pre-allocate additional resources to devices only after successful allocation of essential resources.
Linux tries to pre-allocate minimal resources to hotplug bridges. This
works fine as long as there are enough resources  to satisfy all other
genuine resource requirements. However if enough resources are not
available to satisfy any of these nice-to-have pre-allocations, the
resource-allocator reports errors and returns failure.

This patch distinguishes between must-have resource from nice-to-have
resource.  Any failure to allocate nice-to-have resources are ignored.

This behavior can be particularly useful to trigger automatic
reallocation when the OS discovers genuine allocation-conflicts or
genuine unallocated-requests caused by buggy allocation behavior of the
native BIOS/uEFI.

https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the
movitation behind the patch. This patch is verified to resolve the above
bug.

    changelog v2:  o  fixed a bug where pci_assign_resource() was called on a
    		  resource of zero resource size.

    changelog v3:  addressed Bjorn's comment
    	       o  "Please don't indent and right-justify the changelog".
    	       o  removed add_size from struct resource.  The additional
    		  size is now tracked using a linked list.

    changelog v4:  o moved freeing up of elements in head list from
    		assign_requested_resources_sorted() to
    		__assign_resources_sorted().
    	       o removed a wrong reference to 'add_size' in
    			pbus_size_mem().
    	       o some code optimizations in adjust_resources_sorted()
    			and assign_requested_resources_sorted()

    changelog v5:  o moved freeing up of elements in head list from
    		assign_requested_resources_sorted() to
    		__assign_resources_sorted().
    	       o removed a wrong reference to 'add_size' in
    			pbus_size_mem().
    	       o some code optimizations in adjust_resources_sorted()
    			and assign_requested_resources_sorted()

    changelog v5:  o factored out common code and made them into
		separate independent patches
    	       o added comments in kdoc format
	       o added a BUG_ON in pci_assign_unassigned_resources()
		 to catch for memory leak.

Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-03-04 10:46:47 -08:00
Ram Pai fc075e1da1 PCI: introduce reset_resource()
Introduce reset_resource() which factors out resource reset logic.

Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-03-04 10:46:16 -08:00
Ram Pai 094732a520 PCI: data structure agnostic free list function
Replace free_failed_list() with a free_list() call. free_list() can
handle 'resource_list_x', 'resource_list' and any linked list linked
through ->next

Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-03-04 10:46:04 -08:00
Ram Pai 13583b1659 PCI: refactor io size calculation code
Refactor code that calculates the io size in pbus_size_io() and
pbus_mem_io() into separate functions.

Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-03-04 10:45:48 -08:00
Jiri Slaby 87e3dc3855 PCI: do not create quirk I/O regions below PCIBIOS_MIN_IO for ICH
Some broken BIOSes on ICH4 chipset report an ACPI region which is in
conflict with legacy IDE ports when ACPI is disabled. Even though the
regions overlap, IDE ports are working correctly (we cannot find out
the decoding rules on chipsets).

So the only problem is the reported region itself, if we don't reserve
the region in the quirk everything works as expected.

This patch avoids reserving any quirk regions below PCIBIOS_MIN_IO
which is 0x1000. Some regions might be (and are by a fast google
query) below this border, but the only difference is that they won't
be reserved anymore. They should still work though the same as before.

The conflicts look like (1f.0 is bridge, 1f.1 is IDE ctrl):
pci 0000:00:1f.1: address space collision: [io 0x0170-0x0177] conflicts with 0000:00:1f.0 [io  0x0100-0x017f]

At 0x0100 a 128 bytes long ACPI region is reported in the quirk for
ICH4. ata_piix then fails to find disks because the IDE legacy ports
are zeroed:
ata_piix 0000:00:1f.1: device not available (can't reserve [io 0x0000-0x0007])

References: https://bugzilla.novell.com/show_bug.cgi?id=558740
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Renninger <trenn@suse.de>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-03-04 10:42:32 -08:00
Stefano Stabellini 47e9037ac1 PCI hotplug: acpiphp: set current_state to D0 in register_slot
If a device doesn't support power management (pm_cap == 0) but it is
acpi_pci_power_manageable() because there is a _PS0 method declared for
it and _EJ0 is also declared for the slot then nobody is going to set
current_state = PCI_D0 for this device.  This is what I think it is
happening:

pci_enable_device
    |
__pci_enable_device_flags
/* here we do not set current_state because !pm_cap */
    |
do_pci_enable_device
    |
pci_set_power_state
    |
__pci_start_power_transition
    |
pci_platform_power_transition
/* platform_pci_power_manageable() calls acpi_pci_power_manageable that
 * returns true */
    |
platform_pci_set_power_state
/* acpi_pci_set_power_state gets called and does nothing because the
 * acpi device has _EJ0, see the comment "If the ACPI device has _EJ0,
 * ignore the device" */

at this point if we refer to the commit message that introduced the
comment above (10b3dcae0f), it is up to
the hotplug driver to set the state to D0.
However AFAICT the pci hotplug driver never does, in fact
drivers/pci/hotplug/acpiphp_glue.c:register_slot sets the slot flags to
(SLOT_ENABLED | SLOT_POWEREDON) but it does not set the pci device
current state to PCI_D0.

So my proposed fix is also to set current_state = PCI_D0 in
register_slot.
Comments are very welcome.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-03-04 10:42:22 -08:00
Narendra_K@Dell.com 6058989bad PCI: Export ACPI _DSM provided firmware instance number and string name to sysfs
This patch exports ACPI _DSM (Device Specific Method) provided firmware
instance number and string name of PCI devices as defined by 'PCI
Firmware Specification Revision 3.1' section 4.6.7.( DSM for Naming a
PCI or PCI Express Device Under Operating Systems) to sysfs.

New files created are:
  /sys/bus/pci/devices/.../label which contains the firmware name for
the device in question, and
  /sys/bus/pci/devices/.../acpi_index which contains the firmware device type
instance for the given device.

cat /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/acpi_index
1
cat /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/label
Embedded Broadcom 5709C NIC 1

cat /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.1/acpi_index
2
cat /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.1/label
Embedded Broadcom 5709C NIC 2

The ACPI _DSM provided firmware 'instance number' and 'string name' will
be given priority if the firmware also provides 'SMBIOS type 41 device
type instance and string'.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Jordan Hargrave <jordan_hargrave@dell.com>
Signed-off-by: Narendra K <narendra_k@dell.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-03-04 10:41:56 -08:00
Jiri Slaby cdb9755849 PCI: add more checking to ICH region quirks
Per ICH4 and ICH6 specs, ACPI and GPIO regions are valid iff ACPI_EN
and GPIO_EN bits are set to 1. Add checks for these bits into the
quirks prior to the region creation.

While at it, name the constants by macros.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Renninger <trenn@suse.de>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-03-04 10:41:32 -08:00
Prarit Bhargava 457d9d088b PCI: aer-inject: Override PCIe AER Mask Registers
I have several systems which have the same problem:  The PCIe AER
corrected and uncorrected masks have all the error bits set.  This
results in the inablility to test with the aer_inject module & utility
on those systems.

Add the 'aer_mask_override' module parameter which will override the
corrected or uncorrected masks for a PCI device.  The mask will have the
bit corresponding to the status passed into the aer_inject() function.

After this patch it is possible to successfully use the aer_inject
utility on those PCI slots.

Successfully tested by me on a Dell and Intel whitebox which exhibited
the mask problem.

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-03-04 10:41:02 -08:00
Rafael J. Wysocki 5190726765 ACPI: Remove the wakeup.run_wake_count device field
The wakeup.run_wake_count ACPI device field is only used by the PCI
runtime PM code to "protect" devices from being prepared for
generating wakeup signals more than once in a row.  However, it
really doesn't provide any protection, because (1) all of the
functions it is supposed to protect use their own reference counters
effectively ensuring that the device will be set up for generating
wakeup signals just once and (2) the PCI runtime PM code uses
wakeup.run_wake_count in a racy way, since nothing prevents
acpi_dev_run_wake() from being called concurrently from two different
threads for the same device.

Remove the wakeup.run_wake_count ACPI device field which is
unnecessary, confusing and used in a wrong way.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-02-24 19:58:53 +01:00
Konrad Rzeszutek Wilk cc0f89c4a4 pci/xen: Cleanup: convert int** to int[]
Cleanup code. Cosmetic change to make the code look easier
to read.

Reviewed-by: Ian Campbell <Ian.Campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-02-18 12:41:49 -05:00
Konrad Rzeszutek Wilk 1d4610527b xen-pcifront: Sanity check the MSI/MSI-X values
Check the returned vector values for any values that are
odd or plain incorrect (say vector value zero), and if so
print a warning. Also fixup the return values.

This patch was precipiated by the Xen PCIBack returning the
incorrect values due to how it was retrieving PIRQ values.
This has been fixed in the xen-pciback by
"xen/pciback: Utilize 'xen_pirq_from_irq' to get PIRQ value"
patch.

Reviewed-by: Ian Campbell <Ian.Campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-02-18 09:26:22 -05:00
Tejun Heo db2e2e6ee9 xen-pcifront: don't use flush_scheduled_work()
flush_scheduled_work() is scheduled for deprecation.  Cancel ->op_work
directly instead.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ryan Wilson <hap9@epoch.ncsc.mil>
Cc: Jan Beulich <JBeulich@novell.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-02-17 16:18:45 -05:00
Brandeburg, Jesse b99af4b002 PCI: remove quirk for pre-production systems
Revert commit 7eb93b175d
Author: Yu Zhao <yu.zhao@intel.com>
Date:   Fri Apr 3 15:18:11 2009 +0800

    PCI: SR-IOV quirk for Intel 82576 NIC

    If BIOS doesn't allocate resources for the SR-IOV BARs, zero the Flash
    BAR and program the SR-IOV BARs to use the old Flash Memory Space.

    Please refer to Intel 82576 Gigabit Ethernet Controller Datasheet
    section 7.9.2.14.2 for details.
    http://download.intel.com/design/network/datashts/82576_Datasheet.pdf

    Signed-off-by: Yu Zhao <yu.zhao@intel.com>
    Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

This quirk was added before SR-IOV was in production and now all machines that
originally had this issue alreayd have bios updates to correct the issue. The
quirk itself is no longer needed and in fact causes bugs if run.  Remove it.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
CC: Yu Zhao <yu.zhao@intel.com>
CC: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-16 11:45:46 -08:00
Chris Wright a628e7b87e pci: use security_capable() when checking capablities during config space read
This reintroduces commit 47970b1b which was subsequently reverted
as f00eaeea.  The original change was broken and caused X startup
failures and generally made privileged processes incapable of reading
device dependent config space.  The normal capable() interface returns
true on success, but the LSM interface returns 0 on success.  This thinko
is now fixed in this patch, and has been confirmed to work properly.

So, once again...Eric Paris noted that commit de139a3 ("pci: check caps
from sysfs file open to read device dependent config space") caused the
capability check to bypass security modules and potentially auditing.
Rectify this by calling security_capable() when checking the open file's
capabilities for config space reads.

Reported-by: Eric Paris <eparis@redhat.com>
Tested-by: Dave Young <hidave.darkstar@gmail.com>
Acked-by: James Morris <jmorris@namei.org>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Alex Riesen <raa.lkml@gmail.com>
Cc: Sedat Dilek <sedat.dilek@googlemail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: James Morris <jmorris@namei.org>
2011-02-15 19:06:31 +11:00
Linus Torvalds f00eaeea7a Revert "pci: use security_capable() when checking capablities during config space read"
This reverts commit 47970b1b2a.

It turns out it breaks several distributions.  Looks like the stricter
selinux checks fail due to selinux policies not being set to allow the
access - breaking X, but also lspci.

So while the change was clearly the RightThing(tm) to do in theory, in
practice we have backwards compatibility issues making it not work.

Reported-by: Dave Young <hidave.darkstar@gmail.com>
Acked-by: David Airlie <airlied@linux.ie>
Acked-by: Alex Riesen <raa.lkml@gmail.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-13 07:50:50 -08:00
Chris Wright 47970b1b2a pci: use security_capable() when checking capablities during config space read
Eric Paris noted that commit de139a3 ("pci: check caps from sysfs file
open to read device dependent config space") caused the capability check
to bypass security modules and potentially auditing.  Rectify this by
calling security_capable() when checking the open file's capabilities
for config space reads.

Reported-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: James Morris <jmorris@namei.org>
2011-02-11 17:58:11 +11:00
Jesper Juhl 7c867c8899 PCI: Avoid potential NULL pointer dereference in pci_scan_bridge
pci_add_new_bus() calls pci_alloc_child_bus() which calls pci_alloc_bus()
that allocates memory dynamically with kzalloc(). The return value of
kzalloc() is the pointer that's eventually returned from
pci_add_new_bus(), so since kzalloc() can fail and return NULL so can
pci_add_new_bus(). Thus we may end up dereferencing a NULL pointer in
drivers/pci/probe.c::pci_scan_bridge(). Seems to me we should test for
this and bail out if it happens rather than crashing.
Also removed some trailing whitespace that bugged me while looking at
this.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-08 13:08:05 -08:00
Ben Hutchings 0f12a4e293 PCI: sysfs: Fix failure path for addition of "vpd" attribute
Commit 280c73d ("PCI: centralize the capabilities code in
pci-sysfs.c") changed the initialisation of the "rom" and "vpd"
attributes, and made the failure path for the "vpd" attribute
incorrect.  We must free the new attribute structure (attr), but
instead we currently free dev->vpd->attr.  That will normally be NULL,
resulting in a memory leak, but it might be a stale pointer, resulting
in a double-free.

Found by inspection; compile-tested only.

Cc: stable@kernel.org
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-08 10:02:46 -08:00
David Rientjes 6a108a14fa kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERT
The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option
is used to configure any non-standard kernel with a much larger scope than
only small devices.

This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes
references to the option throughout the kernel.  A new CONFIG_EMBEDDED
option is added that automatically selects CONFIG_EXPERT when enabled and
can be used in the future to isolate options that should only be
considered for embedded systems (RISC architectures, SLOB, etc).

Calling the option "EXPERT" more accurately represents its intention: only
expert users who understand the impact of the configuration changes they
are making should enable it.

Reviewed-by: Ingo Molnar <mingo@elte.hu>
Acked-by: David Woodhouse <david.woodhouse@intel.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Greg KH <gregkh@suse.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Robin Holt <holt@sgi.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-20 17:02:05 -08:00
Jan Kiszka 7a6610139a intel-iommu: Fix use after release during device attach
Obtain the new pgd pointer before releasing the page containing this
value.

Cc: stable@kernel.org
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-01-17 16:21:42 +00:00
Linus Torvalds d73b388459 Merge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI/PM: Report wakeup events before resuming devices
  PCI/PM: Use pm_wakeup_event() directly for reporting wakeup events
  PCI: sysfs: Update ROM to include default owner write access
  x86/PCI: make Broadcom CNB20LE driver EMBEDDED and EXPERIMENTAL
  x86/PCI: don't use native Broadcom CNB20LE driver when ACPI is available
  PCI/ACPI: Request _OSC control once for each root bridge (v3)
  PCI: enable pci=bfsort by default on future Dell systems
  PCI/PCIe: Clear Root PME Status bits early during system resume
  PCI: pci-stub: ignore zero-length id parameters
  x86/PCI: irq and pci_ids patch for Intel Patsburg
  PCI: Skip id checking if no id is passed
  PCI: fix __pci_device_probe kernel-doc warning
  PCI: make pci_restore_state return void
  PCI: Disable ASPM if BIOS asks us to
  PCI: Add mask bit definition for MSI-X table
  PCI: MSI: Move MSI-X entry definition to pci_regs.h

Fix up trivial conflicts in drivers/net/{skge.c,sky2.c} that had in the
meantime been converted to not use legacy PCI power management, and thus
no longer use pci_restore_state() at all (and that caused trivial
conflicts with the "make pci_restore_state return void" patch)
2011-01-14 09:29:05 -08:00
Rafael J. Wysocki 0f953bf6b4 PCI/PM: Report wakeup events before resuming devices
Make wakeup events be reported by the PCI subsystem before attempting to
resume devices or queuing up runtime resume requests for them, because
wakeup events should be reported as soon as they have been detected.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-01-14 08:55:43 -08:00
Rafael J. Wysocki b6e335aeeb PCI/PM: Use pm_wakeup_event() directly for reporting wakeup events
After recent changes related to wakeup events pm_wakeup_event()
automatically checks if the given device is configured to signal wakeup,
so pci_wakeup_event() may be a static inline function calling
pm_wakeup_event() directly.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-01-14 08:55:43 -08:00
Alex Williamson ff29530e65 PCI: sysfs: Update ROM to include default owner write access
The PCI sysfs ROM interface requires an enabling write to access the ROM
image, but the default file mode is 0400.  The original proposed patch
adding sysfs ROM support was a true read-only interface, with the
enabling bit coming in as a feature request.  I suspect it was simply an
oversight that the file mode didn't get updated to match the API.

Acked-by: Chris Wright <chrisw@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-01-14 08:55:42 -08:00
Rafael J. Wysocki 415e12b237 PCI/ACPI: Request _OSC control once for each root bridge (v3)
Move the evaluation of acpi_pci_osc_control_set() (to request control of
PCI Express native features) into acpi_pci_root_add() to avoid calling
it many times for the same root complex with the same arguments.
Additionally, check if all of the requisite _OSC support bits are set
before calling acpi_pci_osc_control_set() for a given root complex.

References: https://bugzilla.kernel.org/show_bug.cgi?id=20232
Reported-by: Ozan Caglayan <ozan@pardus.org.tr>
Tested-by: Ozan Caglayan <ozan@pardus.org.tr>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-01-14 08:55:41 -08:00
Linus Torvalds 94d4c4cd56 Merge branch 'stable/xenbus' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
* 'stable/xenbus' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/xenbus: making backend support modular is too complex
  xen/pci: Make xen-pcifront be dependent on XEN_XENBUS_FRONTEND
  xen/xenbus: fixup checkpatch issues in xenbus_probe*
  xen/netfront: select XEN_XENBUS_FRONTEND
  xen/xenbus: clean up noise in xenbus_probe_frontend.c
  xen/xenbus: clean up noise in xenbus_probe_backend.c
  xen/xenbus: clean up noise in xenbus_probe.c
  xen/xenbus: cleanup debug noise in xenbus_comms.c
  xen/xenbus: clean up error handling
  xen/xenbus: make frontend bus GPL
  xen/xenbus: make sure backend bus is registered earlier
  xenbus/frontend: register bus earlier
  xen: remove xen/evtchn.h
  xen: add backend driver support
  xen: separate out frontend xenbus
2011-01-12 08:37:35 -08:00
Alexey Dobriyan 57cc7215b7 headers: kobject.h redux
Remove kobject.h from files which don't need it, notably,
sched.h and fs.h.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-10 08:51:44 -08:00
Konrad Rzeszutek Wilk fce263c141 xen/pci: Make xen-pcifront be dependent on XEN_XENBUS_FRONTEND
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-01-05 16:31:12 -05:00
Rafael J. Wysocki fe31e69740 PCI/PCIe: Clear Root PME Status bits early during system resume
I noticed that PCI Express PMEs don't work on my Toshiba Portege R500
after the system has been woken up from a sleep state by a PME
(through Wake-on-LAN).  After some investigation it turned out that
the BIOS didn't clear the Root PME Status bit in the root port that
received the wakeup PME and since the Requester ID was also set in
the port's Root Status register, any subsequent PMEs didn't trigger
interrupts.

This problem can be avoided by clearing the Root PME Status bits in
all PCI Express root ports during early resume.  For this purpose,
add an early resume routine to the PCIe port driver and make this
driver be always registered, even if pci_ports_disable is set (in
which case the driver's only function is to provide the early
resume callback).

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-12-23 12:54:03 -08:00
Tejun Heo 99a0fadf56 PCI: pci-stub: ignore zero-length id parameters
pci-stub uses strsep() to separate list of ids and generates a warning
message when it fails to parse an id.  However, not specifying the
parameter results in ids set to an empty string.  strsep() happily
returns the empty string as the first token and thus triggers the
warning message spuriously.

Make the tokner ignore zero length ids.

Reported-by: Chris Wright <chrisw@sous-sol.org>
Reported-by: Prasad Joshi <P.G.Joshi@student.reading.ac.uk>
Cc: stable@kernel.org
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-12-23 12:53:52 -08:00
Yinghai Lu ee8abf783d PCI: Skip id checking if no id is passed
Will get warning when pci stub driver is built-in kenel like:
pci-stub: invalid id string ""

So stop early if no id is passed.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-12-23 12:53:10 -08:00
Randy Dunlap 23ea3793fd PCI: fix __pci_device_probe kernel-doc warning
Fix kernel-doc warning for __pci_device_probe():

Warning(drivers/pci/pci-driver.c:341): missing initial short description on line:
 * __pci_device_probe()

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-12-23 12:53:09 -08:00
Jon Mason 1d3c16a818 PCI: make pci_restore_state return void
pci_restore_state only ever returns 0, thus there is no benefit in
having it return any value.  Also, a large majority of the callers do
not check the return code of pci_restore_state.  Make the
pci_restore_state a void return and avoid the overhead.

Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Jon Mason <jon.mason@exar.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-12-23 12:53:09 -08:00
Matthew Garrett 2f671e2dbf PCI: Disable ASPM if BIOS asks us to
We currently refuse to touch the ASPM registers if the BIOS tells us that
ASPM isn't supported. This can cause problems if the BIOS has (for any
reason) enabled ASPM on some devices anyway. Change the code such that we
explicitly clear ASPM if the FADT indicates that ASPM isn't supported,
and make sure we tidy up appropriately on device removal in order to deal
with the hotplug case. If ASPM is disabled because the BIOS doesn't hand
over control then we won't touch the registers.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-12-23 12:53:08 -08:00
Sheng Yang 8d80528696 PCI: Add mask bit definition for MSI-X table
Then we can use it instead of magic number 1.

Reviewed-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-12-23 12:53:08 -08:00
Sheng Yang 00aaaef9a5 PCI: MSI: Move MSI-X entry definition to pci_regs.h
Then it can be used by others.

Reviewed-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-12-23 12:53:07 -08:00
Rafael J. Wysocki 994e0b2c36 PCI hotplug: Fix unexpected driver unregister in pciehp_acpi.c
If pcie_ports_disabled is set, pcie_port_service_register() returns
error code and select_detection_mode() should not attempt to
unregister dummy_driver and use dummy_slots.  It should return
PCIEHP_DETECT_ACPI immediately instead.

Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-12-23 12:51:49 -08:00
Linus Torvalds 55ec86f848 Merge branches 'x86-fixes-for-linus' and 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86-32: Make sure we can map all of lowmem if we need to
  x86, vt-d: Handle previous faults after enabling fault handling
  x86: Enable the intr-remap fault handling after local APIC setup
  x86, vt-d: Fix the vt-d fault handling irq migration in the x2apic mode
  x86, vt-d: Quirk for masking vtd spec errors to platform error handling logic
  x86, xsave: Use alloc_bootmem_align() instead of alloc_bootmem()
  bootmem: Add alloc_bootmem_align()
  x86, gcc-4.6: Use gcc -m options when building vdso
  x86: HPET: Chose a paranoid safe value for the ETIME check
  x86: io_apic: Avoid unused variable warning when CONFIG_GENERIC_PENDING_IRQ=n

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf: Fix off by one in perf_swevent_init()
  perf: Fix duplicate events with multiple-pmu vs software events
  ftrace: Have recordmcount honor endianness in fn_ELF_R_INFO
  scripts/tags.sh: Add magic for trace-events
  tracing: Fix panic when lseek() called on "trace" opened for writing
2010-12-19 10:44:54 -08:00
Bjorn Helgaas 6db45b76ea Revert "PCI: allocate bus resources from the top down"
This reverts commit b126b4703a.

We're going back to the old behavior of allocating from bus resources
in _CRS order.

Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-12-17 10:00:54 -08:00
Bjorn Helgaas ac57cd5ee1 Revert "PCI: fix pci_bus_alloc_resource() hang, prefer positive decode"
This reverts commit 82e3e767c2.

We're going back to considering bus resources in the order we found
them (in _CRS order, when we're using _CRS), so we don't need to
define any ordering.

Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-12-17 10:00:38 -08:00
Neil Horman 49c2fa08a7 PCI: Update MCP55 quirk to not affect non HyperTransport variants
I wrote this quirk awhile ago to properly setup MCP55 chips on hypertransport
busses so that interrupts reached whatever cpu happend to boot the kdump kernel.
while that works well, it was recently shown to me that a a non-hypertransport
variant of the MCP55 exists, and on those system the register that this quirk
manipulates causes hangs if you write to it.  Since the quirk was only meant to
handle errors found on MCP55 chips that have a HT interface, this patch adds a
filter to make sure the chip is an HT capable before making the needed register
adjustment.  This lets the broken MCP55s work with kdump while not breaking the
non-HT variants.

Resolves https://bugzilla.kernel.org/show_bug.cgi?id=23952

Tested successfully by the reporter and myself.

Cc: stable@kernel.org
Reported-by: Mathieu Bérard <mathieu@mberard.eu>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-12-16 14:07:31 -08:00
Suresh Siddha 7f99d946e7 x86, vt-d: Handle previous faults after enabling fault handling
Fault handling is getting enabled after enabling the interrupt-remapping (as
the success of interrupt-remapping can affect the apic mode and hence the
fault handling mode).

Hence there can potentially be some faults between the window of enabling
interrupt-remapping in the vt-d and the fault-handling of the vt-d units.

Handle any previous faults after enabling the vt-d fault handling.

For v2.6.38 cleanup, need to check if we can remove the dmar_fault() in the
enable_intr_remapping() and see if we can enable fault handling along with
enabling intr-remapping.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
LKML-Reference: <20101201062244.630417138@intel.com>
Cc: stable@kernel.org [v2.6.32+]
Acked-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-12-13 16:53:57 -08:00
Suresh Siddha 254e42006c x86, vt-d: Quirk for masking vtd spec errors to platform error handling logic
On platforms with Intel 7500 chipset, there were some reports of system
hang/NMI's during kexec/kdump in the presence of interrupt-remapping enabled.

During kdump, there is a window where the devices might be still using old
kernel's interrupt information, while the kdump kernel is coming up. This can
cause vt-d faults as the interrupt configuration from the old kernel map to
null IRTE entries in the new kernel etc. (with out interrupt-remapping enabled,
we still have the same issue but in this case we will see benign spurious
interrupt hit the new kernel).

Based on platform config settings, these platforms seem to generate NMI/SMI
when a vt-d fault happens and there were reports that the resulting SMI causes
the  system to hang.

Fix it by masking vt-d spec defined errors to platform error reporting logic.
VT-d spec related errors are already handled by the VT-d OS code, so need to
report the same error through other channels.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
LKML-Reference: <1291667190.2675.8.camel@sbsiddha-MOBL3.sc.intel.com>
Cc: stable@kernel.org	[v2.6.32+]
Reported-by: Max Asbock <masbock@linux.vnet.ibm.com>
Reported-and-tested-by: Takao Indoh <indou.takao@jp.fujitsu.com>
Acked-by: Chris Wright <chrisw@sous-sol.org>
Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-12-13 16:51:51 -08:00
Linus Torvalds 47143b094d Merge branch 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile
* 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  pci root complex: support for tile architecture
  drivers/net/tile/: on-chip network drivers for the tile architecture
  MAINTAINERS: add drivers/char/hvc_tile.c as maintained by tile
2010-11-25 07:42:03 +09:00
Chris Metcalf f02cbbe657 pci root complex: support for tile architecture
This change enables PCI root complex support for TILEPro.  Unlike
TILE-Gx, TILEPro has no support for memory-mapped I/O, so the PCI
support consists of hypervisor upcalls for PIO, DMA, etc.  However,
the performance is fine for the devices we have tested with so far
(1Gb Ethernet, SATA, etc.).

The <asm/io.h> header was tweaked to be a little bit more aggressive
about disabling attempts to map/unmap IO port space.  The hacky
<asm/pci-bridge.h> header was rolled into the <asm/pci.h> header
and the result was simplified.  Both of the latter two headers were
preliminary versions not meant for release before now - oh well.

There is one quirk for our TILEmpower platform, which accidentally
negotiates up to 5GT and needs to be kicked down to 2.5GT.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2010-11-24 13:13:49 -05:00
Arnd Bergmann 451a3c24b0 BKL: remove extraneous #include <smp_lock.h>
The big kernel lock has been removed from all these files at some point,
leaving only the #include.

Remove this too as a cleanup.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-17 08:59:32 -08:00
Darrick J. Wong 8c05cd08a7 PCI: fix offset check for sysfs mmapped files
I just loaded 2.6.37-rc2 on my machines, and I noticed that X no longer starts.
Running an strace of the X server shows that it's doing this:

open("/sys/bus/pci/devices/0000:07:00.0/resource0", O_RDWR) = 10
mmap(NULL, 16777216, PROT_READ|PROT_WRITE, MAP_SHARED, 10, 0) = -1 EINVAL (Invalid argument)

This code seems to be asking for a shared read/write mapping of 16MB worth of
BAR0 starting at file offset 0, and letting the kernel assign a starting
address.  Unfortunately, this -EINVAL causes X not to start.  Looking into
dmesg, there's a complaint like so:

process "Xorg" tried to map 0x01000000 bytes at page 0x00000000 on 0000:07:00.0 BAR 0 (start 0x        96000000, size 0x         1000000)

...with the following code in pci_mmap_fits:

	pci_start = (mmap_api == PCI_MMAP_SYSFS) ?
		pci_resource_start(pdev, resno) >> PAGE_SHIFT : 0;
        if (start >= pci_start && start < pci_start + size &&
                        start + nr <= pci_start + size)

It looks like the logic here is set up such that when the mmap call comes via
sysfs, the check in pci_mmap_fits wants vma->vm_pgoff to be between the
resource's start and end address, and the end of the vma to be no farther than
the end.  However, the sysfs PCI resource files always start at offset zero,
which means that this test always fails for programs that mmap the sysfs files.
Given the comment in the original commit
3b519e4ea6, I _think_ the old procfs files
require that the file offset be equal to the resource's base address when
mmapping.

I think what we want here is for pci_start to be 0 when mmap_api ==
PCI_MMAP_PROCFS.  The following patch makes that change, after which the Matrox
and Mach64 X drivers work again.

Acked-by: Martin Wilck <martin.wilck@ts.fujitsu.com>
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-11-16 09:15:39 -08:00
Linus Torvalds e5c13537b0 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI: sysfs: fix printk warnings
  PCI: fix pci_bus_alloc_resource() hang, prefer positive decode
  PCI: read current power state at enable time
  PCI: fix size checks for mmap() on /proc/bus/pci files
  x86/PCI: coalesce overlapping host bridge windows
  PCI hotplug: ibmphp: Add check to prevent reading beyond mapped area
2010-11-15 14:01:33 -08:00
Randy Dunlap e25cd062b1 PCI: sysfs: fix printk warnings
Cast pci_resource_start() and pci_resource_len() to u64 for printk.

drivers/pci/pci-sysfs.c:753: warning: format '%16Lx' expects type 'long long unsigned int', but argument 9 has type 'resource_size_t'
drivers/pci/pci-sysfs.c:753: warning: format '%16Lx' expects type 'long long unsigned int', but argument 10 has type 'resource_size_t'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-11-15 09:34:44 -08:00
Bjorn Helgaas 82e3e767c2 PCI: fix pci_bus_alloc_resource() hang, prefer positive decode
When a PCI bus has two resources with the same start/end, e.g.,

    pci_bus 0000:04: resource 2 [mem 0xd0000000-0xd7ffffff pref]
    pci_bus 0000:04: resource 7 [mem 0xd0000000-0xd7ffffff]

the previous pci_bus_find_resource_prev() implementation would alternate
between them forever:

    pci_bus_find_resource_prev(... [mem 0xd0000000-0xd7ffffff pref])
        returns [mem 0xd0000000-0xd7ffffff]
    pci_bus_find_resource_prev(... [mem 0xd0000000-0xd7ffffff])
        returns [mem 0xd0000000-0xd7ffffff pref]
    pci_bus_find_resource_prev(... [mem 0xd0000000-0xd7ffffff pref])
        returns [mem 0xd0000000-0xd7ffffff]
    ...

This happened because there was no ordering between two resources with the
same start and end.  A resource that had the same start and end as the
cursor, but was not itself the cursor, was considered to be before the
cursor.

This patch fixes the hang by making a fixed ordering between any two
resources.

In addition, it tries to allocate from positively decoded regions before
using any subtractively decoded resources.  This means we will use a
positive decode region before a subtractive decode one, even if it means
using a smaller address.

Reference: https://bugzilla.kernel.org/show_bug.cgi?id=22062
Reported-by: Borislav Petkov <bp@amd64.org>
Tested-by: Borislav Petkov <bp@amd64.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-11-12 09:16:08 -08:00
Jesse Barnes 97c145f7c8 PCI: read current power state at enable time
When we enable a PCI device, we avoid doing a lot of the initial setup
work if the device's enable count is non-zero.  If we don't fetch the
power state though, we may later fail to set up MSI due to the unknown
status.  So pick it up before we short circuit the rest due to a
pre-existing enable or mismatched enable/disable pair (as happens with
VGA devices, which are special in a special way).

Tested-by: Jesse Brandeburg <jesse.brandeburg@gmail.com>
Reported-by: Dave Airlie <airlied@linux.ie>
Tested-by: Dave Airlie <airlied@linux.ie>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-11-11 09:38:14 -08:00
Martin Wilck 3b519e4ea6 PCI: fix size checks for mmap() on /proc/bus/pci files
The checks for valid mmaps of PCI resources made through /proc/bus/pci files
that were introduced in 9eff02e204 have several
problems:

1. mmap() calls on /proc/bus/pci files are made with real file offsets > 0,
whereas under /sys/bus/pci/devices, the start of the resource corresponds
to offset 0. This may lead to false negatives in pci_mmap_fits(), which
implicitly assumes the /sys/bus/pci/devices layout.

2. The loop in proc_bus_pci_mmap doesn't skip empty resouces. This leads
to false positives, because pci_mmap_fits() doesn't treat empty resources
correctly (the calculated size is 1 << (8*sizeof(resource_size_t)-PAGE_SHIFT)
in this case!).

3. If a user maps resources with BAR > 0, pci_mmap_fits will emit bogus
WARNINGS for the first resources that don't fit until the correct one is found.

On many controllers the first 2-4 BARs are used, and the others are empty.
In this case, an mmap attempt will first fail on the non-empty BARs
(including the "right" BAR because of 1.) and emit bogus WARNINGS because
of 3., and finally succeed on the first empty BAR because of 2.
This is certainly not the intended behaviour.

This patch addresses all 3 issues.
Updated with an enum type for the additional parameter for pci_mmap_fits().

Cc: stable@kernel.org
Signed-off-by: Martin Wilck <martin.wilck@ts.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-11-11 09:34:32 -08:00
Steven Rostedt ac3abf2c37 PCI hotplug: ibmphp: Add check to prevent reading beyond mapped area
While testing various randconfigs with ktest.pl, I hit the following panic:

BUG: unable to handle kernel paging request at f7e54b03
IP: [<c0d63409>] ibmphp_access_ebda+0x101/0x19bb

Adding printks, I found that the loop that reads the ebda blocks
can move out of the mapped section.

ibmphp_access_ebda: start=f7e44c00 size=5120 end=f7e46000
ibmphp_access_ebda: io_mem=f7e44d80 offset=384
ibmphp_access_ebda: io_mem=f7e54b03 offset=65283

The start of the iomap was at f7e44c00 and had a size of 5120,
making the end f7e46000. We start with an offset of 0x180 or
384, giving the first read at 0xf7e44d80. Reading that location
yields 65283, which is much bigger than the 5120 that was allocated
and makes the next read at f7e54b03 which is outside the mapped area.

Perhaps this is a bug in the driver, or buggy hardware, but this patch
is more about not crashing my box on start up and just giving a warning
if it detects this error.

This patch at least lets my box boot with just a warning.

Cc: Chandru Siddalingappa <chandru@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-11-11 09:34:31 -08:00
Jiri Slaby 2a63dd7275 xen-pcifront: fix PCI reference leak
Stanse found that when pdev is found and has no driver a reference is
leaked in pcifront_common_process. So add pci_dev_put there. For the
pdev == NULL case, pci_dev_put(NULL) is fine.

[v2: Updated to not dereference pcidev->dev per Milton's observation]

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Milton Miller <miltonm@bga.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-11-08 11:41:15 -05:00
Jesper Juhl c8ac3902fb xen-pcifront: Remove duplicate inclusion of headers.
In drivers/pci/xen-pcifront.c the xen/xenbus.h header is included twice -
once is enough.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-11-08 11:30:01 -05:00
Linus Torvalds 18cb657ca1 Merge branch 'stable/xen-pcifront-0.8.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
and branch 'for-linus' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm

* 'for-linus' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm:
  xen: register xen pci notifier
  xen: initialize cpu masks for pv guests in xen_smp_init
  xen: add a missing #include to arch/x86/pci/xen.c
  xen: mask the MTRR feature from the cpuid
  xen: make hvc_xen console work for dom0.
  xen: add the direct mapping area for ISA bus access
  xen: Initialize xenbus for dom0.
  xen: use vcpu_ops to setup cpu masks
  xen: map a dummy page for local apic and ioapic in xen_set_fixmap
  xen: remap MSIs into pirqs when running as initial domain
  xen: remap GSIs as pirqs when running as initial domain
  xen: introduce XEN_DOM0 as a silent option
  xen: map MSIs into pirqs
  xen: support GSI -> pirq remapping in PV on HVM guests
  xen: add xen hvm acpi_register_gsi variant
  acpi: use indirect call to register gsi in different modes
  xen: implement xen_hvm_register_pirq
  xen: get the maximum number of pirqs from xen
  xen: support pirq != irq

* 'stable/xen-pcifront-0.8.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: (27 commits)
  X86/PCI: Remove the dependency on isapnp_disable.
  xen: Update Makefile with CONFIG_BLOCK dependency for biomerge.c
  MAINTAINERS: Add myself to the Xen Hypervisor Interface and remove Chris Wright.
  x86: xen: Sanitse irq handling (part two)
  swiotlb-xen: On x86-32 builts, select SWIOTLB instead of depending on it.
  MAINTAINERS: Add myself for Xen PCI and Xen SWIOTLB maintainer.
  xen/pci: Request ACS when Xen-SWIOTLB is activated.
  xen-pcifront: Xen PCI frontend driver.
  xenbus: prevent warnings on unhandled enumeration values
  xenbus: Xen paravirtualised PCI hotplug support.
  xen/x86/PCI: Add support for the Xen PCI subsystem
  x86: Introduce x86_msi_ops
  msi: Introduce default_[teardown|setup]_msi_irqs with fallback.
  x86/PCI: Export pci_walk_bus function.
  x86/PCI: make sure _PAGE_IOMAP it set on pci mappings
  x86/PCI: Clean up pci_cache_line_size
  xen: fix shared irq device passthrough
  xen: Provide a variant of xen_poll_irq with timeout.
  xen: Find an unbound irq number in reverse order (high to low).
  xen: statically initialize cpu_evtchn_mask_p
  ...

Fix up trivial conflicts in drivers/pci/Makefile
2010-10-28 17:11:17 -07:00
Linus Torvalds e9f29c9a56 Merge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (27 commits)
  x86: allocate space within a region top-down
  x86: update iomem_resource end based on CPU physical address capabilities
  x86/PCI: allocate space from the end of a region, not the beginning
  PCI: allocate bus resources from the top down
  resources: support allocating space within a region from the top down
  resources: handle overflow when aligning start of available area
  resources: ensure callback doesn't allocate outside available space
  resources: factor out resource_clip() to simplify find_resource()
  resources: add a default alignf to simplify find_resource()
  x86/PCI: MMCONFIG: fix region end calculation
  PCI: Add support for polling PME state on suspended legacy PCI devices
  PCI: Export some PCI PM functionality
  PCI: fix message typo
  PCI: log vendor/device ID always
  PCI: update Intel chipset names and defines
  PCI: use new ccflags variable in Makefile
  PCI: add PCI_MSIX_TABLE/PBA defines
  PCI: add PCI vendor id for STmicroelectronics
  x86/PCI: irq and pci_ids patch for Intel Patsburg DeviceIDs
  PCI: OLPC: Only enable PCI configuration type override on XO-1
  ...
2010-10-28 11:59:52 -07:00
Linus Torvalds 0b2d8d9e56 proc_bus_pci_ioctl: remove pointless BKL usage
The BKL was pushed into this function when it was converted to use the
unlocked_ioctl interface, but nothing that the function touches is
actually protected by the BKL.  So just remove the BKL entirely, so that
we finally can get a realistic system build without the BKL being
enabled at all.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27 18:34:59 -07:00
Bjorn Helgaas b126b4703a PCI: allocate bus resources from the top down
Allocate space from the highest-address PCI bus resource first, then work
downward.

Previously, we looked for space in PCI host bridge windows in the order
we discovered the windows.  For example, given the following windows
(discovered via an ACPI _CRS method):

    pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
    pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000effff]
    pci_root PNP0A03:00: host bridge window [mem 0x000f0000-0x000fffff]
    pci_root PNP0A03:00: host bridge window [mem 0xbff00000-0xf7ffffff]
    pci_root PNP0A03:00: host bridge window [mem 0xff980000-0xff980fff]
    pci_root PNP0A03:00: host bridge window [mem 0xff97c000-0xff97ffff]
    pci_root PNP0A03:00: host bridge window [mem 0xfed20000-0xfed9ffff]

we attempted to allocate from [mem 0x000a0000-0x000bffff] first, then
[mem 0x000c0000-0x000effff], and so on.

With this patch, we allocate from [mem 0xff980000-0xff980fff] first, then
[mem 0xff97c000-0xff97ffff], [mem 0xfed20000-0xfed9ffff], etc.

Allocating top-down follows Windows practice, so we're less likely to
trip over BIOS defects in the _CRS description.

On the machine above (a Dell T3500), the [mem 0xbff00000-0xbfffffff] region
doesn't actually work and is likely a BIOS defect.  The symptom is that we
move the AHCI controller to 0xbff00000, which leads to "Boot has failed,
sleeping forever," a BUG in ahci_stop_engine(), or some other boot failure.

Reference: https://bugzilla.kernel.org/show_bug.cgi?id=16228#c43
Reference: https://bugzilla.redhat.com/show_bug.cgi?id=620313
Reference: https://bugzilla.redhat.com/show_bug.cgi?id=629933
Reported-by: Brian Bloniarz <phunge0@hotmail.com>
Reported-and-tested-by: Stefan Becker <chemobejk@gmail.com>
Reported-by: Denys Vlasenko <dvlasenk@redhat.com>
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-10-26 15:33:37 -07:00
Linus Torvalds 229aebb873 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
  Update broken web addresses in arch directory.
  Update broken web addresses in the kernel.
  Revert "drivers/usb: Remove unnecessary return's from void functions" for musb gadget
  Revert "Fix typo: configuation => configuration" partially
  ida: document IDA_BITMAP_LONGS calculation
  ext2: fix a typo on comment in ext2/inode.c
  drivers/scsi: Remove unnecessary casts of private_data
  drivers/s390: Remove unnecessary casts of private_data
  net/sunrpc/rpc_pipe.c: Remove unnecessary casts of private_data
  drivers/infiniband: Remove unnecessary casts of private_data
  drivers/gpu/drm: Remove unnecessary casts of private_data
  kernel/pm_qos_params.c: Remove unnecessary casts of private_data
  fs/ecryptfs: Remove unnecessary casts of private_data
  fs/seq_file.c: Remove unnecessary casts of private_data
  arm: uengine.c: remove C99 comments
  arm: scoop.c: remove C99 comments
  Fix typo configue => configure in comments
  Fix typo: configuation => configuration
  Fix typo interrest[ing|ed] => interest[ing|ed]
  Fix various typos of valid in comments
  ...

Fix up trivial conflicts in:
	drivers/char/ipmi/ipmi_si_intf.c
	drivers/usb/gadget/rndis.c
	net/irda/irnet/irnet_ppp.c
2010-10-24 13:41:39 -07:00
Linus Torvalds 91b745016c Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: remove in_workqueue_context()
  workqueue: Clarify that schedule_on_each_cpu is synchronous
  memory_hotplug: drop spurious calls to flush_scheduled_work()
  shpchp: update workqueue usage
  pciehp: update workqueue usage
  isdn/eicon: don't call flush_scheduled_work() from diva_os_remove_soft_isr()
  workqueue: add and use WQ_MEM_RECLAIM flag
  workqueue: fix HIGHPRI handling in keep_working()
  workqueue: add queue_work and activate_work trace points
  workqueue: prepare for more tracepoints
  workqueue: implement flush[_delayed]_work_sync()
  workqueue: factor out start_flush_work()
  workqueue: cleanup flush/cancel functions
  workqueue: implement alloc_ordered_workqueue()

Fix up trivial conflict in fs/gfs2/main.c as per Tejun
2010-10-22 17:13:10 -07:00
Stefano Stabellini 67ba37293e Merge commit 'konrad/stable/xen-pcifront-0.8.2' into 2.6.36-rc8-initial-domain-v6 2010-10-22 21:24:06 +01:00
Linus Torvalds 092e0e7e52 Merge branch 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl
* 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl:
  vfs: make no_llseek the default
  vfs: don't use BKL in default_llseek
  llseek: automatically add .llseek fop
  libfs: use generic_file_llseek for simple_attr
  mac80211: disallow seeks in minstrel debug code
  lirc: make chardev nonseekable
  viotape: use noop_llseek
  raw: use explicit llseek file operations
  ibmasmfs: use generic_file_llseek
  spufs: use llseek in all file operations
  arm/omap: use generic_file_llseek in iommu_debug
  lkdtm: use generic_file_llseek in debugfs
  net/wireless: use generic_file_llseek in debugfs
  drm: use noop_llseek
2010-10-22 10:52:56 -07:00
Linus Torvalds c37927d435 Merge branch 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl
* 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl:
  block: autoconvert trivial BKL users to private mutex
  drivers: autoconvert trivial BKL users to private mutex
  ipmi: autoconvert trivial BKL users to private mutex
  mac: autoconvert trivial BKL users to private mutex
  mtd: autoconvert trivial BKL users to private mutex
  scsi: autoconvert trivial BKL users to private mutex

Fix up trivial conflicts (due to addition of private mutex right next to
deletion of a version string) in drivers/char/pcmcia/cm40[04]0_cs.c
2010-10-22 10:49:54 -07:00
Linus Torvalds 157b6ceb13 Merge branch 'x86-iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, iommu: Update header comments with appropriate naming
  ia64, iommu: Add a dummy iommu_table.h file in IA64.
  x86, iommu: Fix IOMMU_INIT alignment rules
  x86, doc: Adding comments about .iommu_table and its neighbors.
  x86, iommu: Utilize the IOMMU_INIT macros functionality.
  x86, VT-d: Make Intel VT-d IOMMU use IOMMU_INIT_* macros.
  x86, GART/AMD-VI: Make AMD GART and IOMMU use IOMMU_INIT_* macros.
  x86, calgary: Make Calgary IOMMU use IOMMU_INIT_* macros.
  x86, xen-swiotlb: Make Xen-SWIOTLB use IOMMU_INIT_* macros.
  x86, swiotlb: Make SWIOTLB use IOMMU_INIT_* macros.
  x86, swiotlb: Simplify SWIOTLB pci_swiotlb_detect routine.
  x86, iommu: Add proper dependency sort routine (and sanity check).
  x86, iommu: Make all IOMMU's detection routines return a value.
  x86, iommu: Add IOMMU_INIT macros, .iommu_table section, and iommu_table_entry structure
2010-10-21 14:23:48 -07:00