Commit Graph

98 Commits

Author SHA1 Message Date
Kuninori Morimoto 5e97313ac4 ASoC: fsi: add fsi_stream_handler and PIO handler
This patch adds struct fsi_stream_handler and defined fsi_pio_push/pop_handler.
these are controled by fsi_steam_xxx() function.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-03 11:55:39 +00:00
Kuninori Morimoto 7b1b3331e6 ASoC: fsi: use fsi_stream in fsi_get_current_fifo_samples() parameter
fsi_get_current_fifo_samples() uses fsi_stream instead of is_play.
This is just prepare cleanup for DMAEngine support.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-03 11:55:39 +00:00
Kuninori Morimoto a449e46754 ASoC: fsi: re-define fsi_is_play() and fsi_stream_is_play()
This patch re-define fsi_is_play() and fsi_stream_is_play().
fsi_data_pop/push() function keeps direct value of "is_play" at this point,
but it will be removed soon.
This is just prepare cleanup for DMAEngine support.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-03 11:55:39 +00:00
Kuninori Morimoto 95b0cf0597 ASoC: fsi: modify fsi_pio_get_area() parameter and using position
This patch modify fsi_pio_get_area() parameter to use
struct fsi_stream, and used it on fsi_fifo_data_ctrl().
This is just prepare cleanup for DMAEngine support.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-03 11:55:39 +00:00
Kuninori Morimoto 8c4152951c ASoC: fsi: rename fsi_stream_push/pop() to fsi_stream_init/quit()
This is preparation for DMAEngine support

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-03 11:55:39 +00:00
Kuninori Morimoto 41bba15193 ASoC: fsi: remove unnecessary parameter from fsi_hw_shutdown()
This is preparation for DMAEngine support

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-03 11:55:38 +00:00
Kuninori Morimoto b49e802781 ASoC: fsi: tidyup: move fsi_fifo_init() onto fsi_hw_startup()
fsi_fifo_init() is called only from fsi_hw_startup()

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-03 11:55:38 +00:00
Kuninori Morimoto d78629e2a4 ASoC: fsi: rename fsi_dma_soft_xxx() to fsi_pio_xxx()
This is preparation for DMAEngine support

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-03 11:55:38 +00:00
Kuninori Morimoto 376cf38a90 ASoC: fsi: data push/pop calculation part was divided
Next transfer data size of "push" and "pop" had calculated on shared function.
But it was not readable code.
This patch divided it into for push, and for pop.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-03 11:55:38 +00:00
Kuninori Morimoto 4e62d84d9d ASoC: fsi: tidyup: fsi_stream_xx() functions were gathered
This patch gathered fsi_stream_xxx() functions in order to make it readable.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-03 11:55:38 +00:00
Kuninori Morimoto c1e6f10ea9 ASoC: fsi: reduce runtime calculation by using pre-setting
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-03 11:55:38 +00:00
Mark Brown bc122e3446 ASoC: fsi: Remove unneeded empty runtime PM callbacks
The runtime PM core no longer requires any callbacks so don't provide
empty ones for it any more.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-31 11:16:12 +00:00
Mark Brown 27f478a65f ASoC: Use core pm_runtime callbacks for fsi
Now that the core holds a pm_runtime reference to the device while the
link is active there is no need for the driver to do so.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-15 02:27:00 +08:00
Axel Lin cb5e87387c ASoC: Convert sh directory to module_platform_driver
Factor out some boilerplate code.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-25 13:15:29 +00:00
Lars-Peter Clausen 85e7652d89 ASoC: Constify snd_soc_dai_ops structs
Commit 1ee46ebd("ASoC: Make the DAI ops constant in the DAI structure")
introduced the possibility to have constant DAI ops structures, yet this is
barley used in both existing drivers and also new drivers being submitted,
although none of them modifies its DAI ops structure. The later is not
surprising since existing drivers are often used as templates for new drivers.
So this patch just constifies all existing snd_soc_dai_ops structs to eliminate
the issue altogether.

The patch was generated with the following coccinelle semantic patch:
// <smpl>
@@
identifier ops;
@@
-struct snd_soc_dai_ops ops =
+const struct snd_soc_dai_ops ops =
{ ... };
// </smpl>

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-23 10:40:46 +00:00
Kuninori Morimoto 65ff03f462 ASoC: fsi: add valid data position control support
FSI2 can control valid data position, like
package in front/back or stream  mode (16bit x 2).
But current fsi driver is assuming it was in-back.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-08 11:02:00 +00:00
Kuninori Morimoto 8918b843af ASoC: fsi: fixup compile warning
This patch fixup below warning

${linux}/sound/soc/sh/fsi.c:442:3:\
 warning: passing argument 1 of '__fsi_reg_read' makes pointer\
 from integer without a cast
${linux}/sound/soc/sh/fsi.c:517:3: \
 warning: passing argument 1 of '__fsi_reg_write' makes pointer\
 from integer without a cast
${linux}/sound/soc/sh/fsi.c:663:3: \
 warning: passing argument 1 of '__fsi_reg_mask_set' makes pointer\
 from integer without a cast

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-08 10:52:24 +00:00
Paul Gortmaker da155d5b40 sound: Add module.h to the previously silent sound users
Lots of sound drivers were getting module.h via the implicit presence
of it in <linux/device.h> but we are going to clean that up.  So
fix up those users now.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:31:21 -04:00
Takashi Iwai bb14eb0da7 Merge branch 'topic/asoc' into for-linus 2011-10-27 10:43:40 +02:00
Arnd Bergmann ca7aceef21 ASoC: sh: use correct __iomem annotations
This removes a few unnecessary type casts and avoids
sparse warnings.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-02 21:51:27 +01:00
Yong Zhang 88e24c3a4b sound: irq: Remove IRQF_DISABLED
Since commit [e58aa3d2: genirq: Run irq handlers with interrupts disabled],
We run all interrupt handlers with interrupts disabled
and we even check and yell when an interrupt handler
returns with interrupts enabled (see commit [b738a50a:
genirq: Warn when handler enables interrupts]).

So now this flag is a NOOP and can be removed.

Signed-off-by: Yong Zhang <yong.zhang0@gmail.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-09-22 11:19:20 +02:00
Liam Girdwood 552d1ef6b5 ASoC: core - Optimise and refactor pcm_new() to pass only rtd
Currently pcm_new() passes in 3 arguments :- card, pcm and DAI.

Refactor this to only pass in 1 argument (i.e. the rtd) since struct rtd contains
card, pcm and DAI along with other members too that are useful too.

Signed-off-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-07 18:38:27 +01:00
Kuninori Morimoto 23ca853392 ASoC: sh: fsi: add fsi_hw_startup/shutdown
This patch is preparation of cleanup suspend/resume patch.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-24 18:42:07 +08:00
Kuninori Morimoto cda828cafe ASoC: sh: fsi: cleanup suspend/resume
Current FSI driver was using saved_xxx variable for suspend/resume.
OTOH, the start and stop of power/clock are controlled by
fsi_hw_startup/fsi_hw_shutdown in current FSI driver.
The all necessary registers value are set by fsi_hw_startup.

So, if fsi_hw_shutdown is called when "suspend" is generated,
and fsi_hw_startup is called at "resume",
the saved_xxx are not needed.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-24 18:42:02 +08:00
Kuninori Morimoto 4c48125331 ASoC: sh: fsi: remove fsi_module_init/kill
FSIA/B ports is enabled by default when power-on,
and current FSI is supporting RuntimePM.
In addition, current fsi_module_init/kill doesn't care
simultaneous playback/recorde.
This mean FSI port control is not needed.
This patch remove fsi_module_init/kill

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-24 18:41:57 +08:00
Kuninori Morimoto 2da658927c ASoC: sh: fsi: make sure fsi_stream_push/pop access by spin lock
fsi_stream_push/pop might be called in same time.
This patch protect it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-24 18:41:52 +08:00
Kuninori Morimoto 9478e0b60f ASoC: sh: fsi: remove pm_runtime from fsi_dai_set_fmt.
pm_runtime_get/put_sync were used to access FSI register in fsi_dai_set_fmt
which is called when ALSA probe.
But this register value will disappear after pm_runtime_put_sync
if platform is supporting RuntimePM.
To solve this issue, this patch adds new variable for format,
and remove pm_runtime_get/put_sync from fsi_dai_set_fmt.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-24 18:41:48 +08:00
Kuninori Morimoto 2e651bafa9 ASoC: sh: fsi: tidyup unclear variable naming
Some variables on this driver were a unclear naming,
and were different unit (byte, frame, sample).
And some functions had wrong name
(ex. it returned "sample width" but name was "fsi_get_frame_width").
This patch tidy-up this issue, and the minimum unit become "sample".
Special thanks to Takashi YOSHII.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-24 18:41:44 +08:00
Kuninori Morimoto 1ddddd3635 ASoC: sh: fsi: irq control moves to fsi_port_start/stop
Using fsi_irq_enable/disable in fsi_port_start/stop is very natural.
This patch is preparation of cleanup suspend/resume patch.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-24 18:41:40 +08:00
Kuninori Morimoto 4f56cde17e ASoC: sh: fsi: add fsi_set_master_clk
Current FSI driver is using set_rate call back function which is for
master mode.
By this patch, it is used from fsi_set_master_clk.
This patch is preparation of cleanup suspend/resume patch.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-24 18:41:36 +08:00
Kuninori Morimoto 0ffe296add ASoC: sh: fsi: tidyup parameter of fsi_stream_push
It is possible to create buff_len and period_len
from substream->runtime.
This patch is preparation of tidyup unclear variable naming patch.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-24 18:41:32 +08:00
Kuninori Morimoto 1f5e2a319d ASoC: sh: fsi: Add module/port clock control function
The FIFO of each port were always working though it was not used
in current FSI driver.
This patch add module/port clock control function for fixing it.
This patch is also caring suspend/resume.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Simon Horman <simon@horms.net>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-26 11:42:11 +01:00
Kuninori Morimoto 106c79ecf2 ASoC: sh: fsi: add dev_pm_ops :: suspend/resume
Current FSI driver sets important settings when probing.
And it are not set again as long as driver is not bind again.
This mean FSI driver will lost it from register
if suspend/resume are happen.
This patch save important settings for suspend/resume.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Simon Horman <simon@horms.net>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-26 11:42:06 +01:00
Kuninori Morimoto 6a9ebad821 ASoC: sh: fsi: add fsi_is_clk_master function
If FSI port is clock master, it use set_rate function
which is callback from platform,
and it is not necessary to call it if FSI port is clock slave.
Current FSI driver called this callback if platform provide it.
This patch modify it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Simon Horman <simon@horms.net>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-26 11:40:55 +01:00
Guennadi Liakhovetski b3c27b51db ASoC: add a module alias to the FSI driver
This patch enables FSI driver autoloading on sh-mobile systems.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Reviewed-by: Simon Horman <horms@verge.net.au
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-18 17:14:28 +01:00
Kuninori Morimoto d985f27e13 ASoC: fsi: driver safely remove for against irq
free_irq and pm_runtime_disable should be called before
snd_soc_unregister_xxx

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-11 13:14:41 -07:00
Kuninori Morimoto b9c9f9675f ASoC: fsi: modify vague PM control on probe
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-11 13:14:33 -07:00
Kuninori Morimoto 0b5ec87d3e ASoC: fsi: take care in failing case of dai register
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-11 13:14:09 -07:00
Kuninori Morimoto f17c13ca52 ASoC: sh: fsi: modify selection method of I2S/PCM/SPDIF format
Current format selection of FSI-codecs depended on platform information for FSI,
and chip default settings for codecs. It is not understandable/formal method.
This patch modify FSI and FSI-codecs to use snd_soc_dai_set_fmt.

But FSI can use I2S/PCM and SPDIF format today.
It can be selected to I2S/PCM by snd_soc_dai_set_fmt, but can not select SPDIF.
So, this patch change FSI platform information to have DAI/SPDIF mode.

If platform selects DAI mode (default),
FSI-codecs can select I2S/PCM by snd_soc_dai_set_fmt,
and if it is SPDIF mode, FSI become SPDIF format.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-26 11:25:47 +00:00
Kuninori Morimoto d7c5762bc7 ASoC: sh: fsi: free from NULL pointer of struct sh_fsi_platform_info
Current FSI driver assumed master->info is not NULL.
This patch allow NULL in master->info

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-26 11:25:33 +00:00
Kuninori Morimoto 160afa7f05 ASoC: sh: fsi: move chan_num from fsi_stream to fsi_priv
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-26 11:25:21 +00:00
Kuninori Morimoto 4d805f7b66 ASoC: sh: fsi: Add snd_soc_dai_set_fmt support
This patch add snd_soc_dai_ops :: set_fmt to FSI driver and
select master/slave clock mode by snd_soc_dai_set_fmt on
fsi-xxx.c instead of platform infomation code.
This patch remove fsi_is_master function which is no longer needed.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-21 19:01:47 +00:00
Kuninori Morimoto 0d032c19e7 ASoC: sh: fsi: Add fsi_get_priv_frm_dai function
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-21 19:01:47 +00:00
Kuninori Morimoto 1ec9bc35a6 ASoC: sh: fsi: Add over/under run counter
Current FSI driver had printed under/over run error
if status register have its error bit.
But runtime print cause the next error
because print out is slow.
This patch add error counter and print error when sound stop

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-17 12:57:14 +00:00
Kuninori Morimoto 9e261bbcba ASoC: sh: fsi: move fsi_irq_enable function to fsi_dai_trigger
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-17 12:56:59 +00:00
Takashi Iwai 20aeeb356b Merge branch 'topic/workq-update' into topic/asoc
Conflicts:
	sound/soc/codecs/wm8350.c
	sound/soc/codecs/wm8753.c
	sound/soc/sh/fsi.c
	sound/soc/soc-core.c
2010-12-13 09:28:43 +01:00
Kuninori Morimoto 43fa95caab ASoC: sh: fsi: remove runtime register check from fsi_master_xxx
Current FSI driver was checking register range on fsi_master_xxx function.
This runtime check was added to avoid an illegal access
from wrong/mistake implementation.
But it is useless check under the correct implementation.
This patch escape runtime check by using macro technique.
If there is wrong implementation, it will be compile error.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-03 12:24:15 +00:00
Kuninori Morimoto e8c8b6318c ASoC: sh: fsi: remove runtime register check from fsi_reg_xxx
Current FSI driver was checking register range on fsi_reg_xxx function.
This runtime check was added to avoid an illegal access
from wrong/mistake implementation.
But it is useless check under the correct implementation.
This patch escape runtime check by using macro technique.
If there is wrong implementation, it will be compile error.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-03 12:24:02 +00:00
Kuninori Morimoto 2b0e73025f ASoC: sh: fsi: change fsi->mst_ctrl to master->a/b_mclk
There was a strange part where fsi->xxx had been used
for fsi_master_xxx function instead of master->xxx in current FSI.
This patch modify it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-03 12:23:34 +00:00
Kuninori Morimoto 48d78e5879 ASoC: sh: fsi: remove fsi_master_write
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-03 12:23:24 +00:00