Commit Graph

308 Commits

Author SHA1 Message Date
Heiko Carstens 996b4a7d8f s390/mem_detect: remove artificial kdump memory types
Simplify the memory detection code a bit by removing the CHUNK_OLDMEM
and CHUNK_CRASHK memory types.
They are not needed. Everything that is needed is a mechanism to
insert holes into the detected memory.

Reviewed-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-05-03 14:21:15 +02:00
Martin Schwidefsky d3383632d4 s390/mm: add pte invalidation notifier for kvm
Add a notifier for kvm to get control before a page table entry is
invalidated. The notifier is only called for ptes of an address space
with pgstes that have been explicitly marked to require notification.
Kvm will use this to get control before prefix pages of virtual CPU
are unmapped.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-05-03 14:21:12 +02:00
Heiko Carstens e5d709bb5f s390/memory hotplug: provide memory_block_size_bytes() function
Commit 0c2c99b1b "memory hotplug: Allow memory blocks to span
multiple memory sections" introduced a weak memory_block_size_bytes()
function which can be used to set the size of a memory block as
seen in sysfs.
Provide an s390 specific override which makes sure that each
memory block has at least a size of 256MB or the increment size of
of a memory increment, whatever is larger.
This way we can make sure that the number of memory sysfs objects
doesn't explode for very large memory configurations.

Reported-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-05-02 15:50:27 +02:00
Heiko Carstens df1bd59c5c s390/mem_detect: limit memory detection loop to "mem=" parameter
The current memory detection loop will detect all present memory of
a machine. This is true even if the user specified the "mem=" parameter
on the kernel command line.
This can be a problem since the memory detection may cause a fully
populated host page table for the guest, even for those parts of the
memory that the guest will never use afterwards.

So fix this and only detect memory up to a user supplied "mem=" limit
if specified.

Reported-by: Michael Johanssen <johanssn@de.ibm.com>
Reviewed-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-05-02 15:50:26 +02:00
Heiko Carstens 0a69406711 s390/mem_detect: add DAT sanity check
Add sanity check: verify if the passed in array resides in vmalloc space.
If so print a warning and return to caller.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-05-02 15:50:23 +02:00
Heiko Carstens d009f4d886 s390/mem_detect: fix lockdep irq tracing
When disabling and enabling interrupts we must tell lockdep.
So use local_irq_save()/restore() to disable and enable interrupts.
The DAT disabling/enabling get handled separately now.
Note: we may not call trace_hardirqs_on() with DAT disabled, since
the generic code may access vmalloc'ed data structures.

Reported-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-05-02 15:50:22 +02:00
Heiko Carstens 066b9fd660 s390/mem_detect: move memory detection code to mm folder
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-05-02 15:50:22 +02:00
Johannes Weiner 0aad818b2d sparse-vmemmap: specify vmemmap population range in bytes
The sparse code, when asking the architecture to populate the vmemmap,
specifies the section range as a starting page and a number of pages.

This is an awkward interface, because none of the arch-specific code
actually thinks of the range in terms of 'struct page' units and always
translates it to bytes first.

In addition, later patches mix huge page and regular page backing for
the vmemmap.  For this, they need to call vmemmap_populate_basepages()
on sub-section ranges with PAGE_SIZE and PMD_SIZE in mind.  But these
are not necessarily multiples of the 'struct page' size and so this unit
is too coarse.

Just translate the section range into bytes once in the generic sparse
code, then pass byte ranges down the stack.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Bernhard Schmidt <Bernhard.Schmidt@lrz.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: David S. Miller <davem@davemloft.net>
Tested-by: David S. Miller <davem@davemloft.net>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29 15:54:35 -07:00
Gerald Schaefer 106c992a5e mm/hugetlb: add more arch-defined huge_pte functions
Commit abf09bed3c ("s390/mm: implement software dirty bits")
introduced another difference in the pte layout vs.  the pmd layout on
s390, thoroughly breaking the s390 support for hugetlbfs.  This requires
replacing some more pte_xxx functions in mm/hugetlbfs.c with a
huge_pte_xxx version.

This patch introduces those huge_pte_xxx functions and their generic
implementation in asm-generic/hugetlb.h, which will now be included on
all architectures supporting hugetlbfs apart from s390.  This change
will be a no-op for those architectures.

[akpm@linux-foundation.org: fix warning]
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Hillf Danton <dhillf@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.cz>	[for !s390 parts]
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29 15:54:33 -07:00
Jiang Liu 0999f1193a mm/s390: use common help functions to free reserved pages
Use common help functions to free reserved pages.

Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29 15:54:30 -07:00
Martin Schwidefsky ab8e523586 s390/mm,gmap: segment mapping race
The gmap_map_segment function creates a special invalid segment table
entry with the address of the requested target location in the process
address space. The first access will create the connection between the
gmap segment table and the target page table of the main process.
If two threads do this concurrently both will walk the page tables and
allocate a gmap_rmap structure for the same segment table entry.
To avoid the race recheck the segment table entry after taking to page
table lock.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-04-23 10:18:04 +02:00
Heiko Carstens c5034945ce s390/mm,gmap: implement gmap_translate()
Implement gmap_translate() function which translates a guest absolute address
to a user space process address without establishing the guest page table
entries.

This is useful for kvm guest address translations where no memory access
is expected to happen soon (e.g. tprot exception handler).

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-04-23 10:18:02 +02:00
Heiko Carstens f7f8d7e51d s390/mm: speedup storage key initialization
Use sske with multiple block control to initialize storage keys within
a 1 MB frame at once.
It turned out that the sske with mb=1 is an order of magnitude faster
than pfmf. This is only an issue for very large systems (several 100GB)
where storage key initialization could last more than a minute.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-04-17 14:07:29 +02:00
Alexandru Gheorghiu 8fe853f393 s390/cmm: Removed useless label
Rewrote conditional statement and eliminated the out_kthread label.

Signed-off-by: Alexandru Gheorghiu <gheorghiuandru@gmail.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-04-17 14:07:27 +02:00
Martin Schwidefsky 7919e91b34 s390/mm: zero page cache synonyms for zEC12
To avoid cache synonyms on System zEC12 32 independent zero pages are
required, one for each combination for bits 2**12 to 2**16 of the virtual
address. To avoid wasting too much memory on small virtual systems the
number of zero pages is limited to 4 if the memory size is less or equal
to 64MB.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-04-17 14:07:24 +02:00
Martin Schwidefsky f752ac4d7d s390/mm: protection exception PSW for aborted transaction
Protection exception usually are suppressing and the fault handler
needs to rewind the PSW by the instruction length to get the correct
fault address. Except for protection exceptions while the CPU is in
the middle of a transaction. The CPU stores the transaction abort
PSW at the start of the transaction, if the transaction is aborted
the PSW is already correct and may not be modified by the fault
handler.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-04-17 12:31:31 +02:00
Heiko Carstens 17ea345a47 s390/mm: ignore change bit for vmemmap
Add hint to the page tables that we don't care about the change bit
in storage keys that belong to vmemmap pages.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-28 09:37:06 +01:00
Heiko Carstens 1819ed1f06 s390/page table dumper: add support for change-recording override bit
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-28 09:37:06 +01:00
Tang Chen 0197518cd3 memory-hotplug: remove memmap of sparse-vmemmap
Introduce a new API vmemmap_free() to free and remove vmemmap
pagetables.  Since pagetable implements are different, each architecture
has to provide its own version of vmemmap_free(), just like
vmemmap_populate().

Note: vmemmap_free() is not implemented for ia64, ppc, s390, and sparc.

[mhocko@suse.cz: fix implicit declaration of remove_pagetable]
Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Signed-off-by: Jianguo Wu <wujianguo@huawei.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Wu Jianguo <wujianguo@huawei.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 17:50:12 -08:00
Wen Congyang 24d335ca36 memory-hotplug: introduce new arch_remove_memory() for removing page table
For removing memory, we need to remove page tables.  But it depends on
architecture.  So the patch introduce arch_remove_memory() for removing
page table.  Now it only calls __remove_pages().

Note: __remove_pages() for some archtecuture is not implemented
      (I don't know how to implement it for s390).

Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: Jianguo Wu <wujianguo@huawei.com>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Wu Jianguo <wujianguo@huawei.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 17:50:12 -08:00
Martin Schwidefsky abf09bed3c s390/mm: implement software dirty bits
The s390 architecture is unique in respect to dirty page detection,
it uses the change bit in the per-page storage key to track page
modifications. All other architectures track dirty bits by means
of page table entries. This property of s390 has caused numerous
problems in the past, e.g. see git commit ef5d437f71
"mm: fix XFS oops due to dirty pages without buffers on s390".

To avoid future issues in regard to per-page dirty bits convert
s390 to a fault based software dirty bit detection mechanism. All
user page table entries which are marked as clean will be hardware
read-only, even if the pte is supposed to be writable. A write by
the user process will trigger a protection fault which will cause
the user pte to be marked as dirty and the hardware read-only bit
is removed.

With this change the dirty bit in the storage key is irrelevant
for Linux as a host, but the storage key is still required for
KVM guests. The effect is that page_test_and_clear_dirty and the
related code can be removed. The referenced bit in the storage
key is still used by the page_test_and_clear_young primitive to
provide page age information.

For page cache pages of mappings with mapping_cap_account_dirty
there will not be any change in behavior as the dirty bit tracking
already uses read-only ptes to control the amount of dirty pages.
Only for swap cache pages and pages of mappings without
mapping_cap_account_dirty there can be additional protection faults.
To avoid an excessive number of additional faults the mk_pte
primitive checks for PageDirty if the pgprot value allows for writes
and pre-dirties the pte. That avoids all additional faults for
tmpfs and shmem pages until these pages are added to the swap cache.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-14 15:55:23 +01:00
Hendrik Brueckner 486c0a0bc8 s390/mm: Fix crst upgrade of mmap with MAP_FIXED
Right now the page table upgrade does not happen if the end address
of a fixed mapping is greater than TASK_SIZE.
Enhance s390_mmap_check() to handle MAP_FIXED mappings correctly.

Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-14 15:55:22 +01:00
Heiko Carstens 420f42ecf4 s390/irq: remove split irq fields from /proc/stat
Now that irq sum accounting for /proc/stat's "intr" line works again we
have the oddity that the sum field (first field) contains only the sum
of the second (external irqs) and third field (I/O interrupts).
The reason for that is that these two fields are already sums of all other
fields. So if we would sum up everything we would count every interrupt
twice.
This is broken since the split interrupt accounting was merged two years
ago: 052ff461c8 "[S390] irq: have detailed
statistics for interrupt types".
To fix this remove the split interrupt fields from /proc/stat's "intr"
line again and only have them in /proc/interrupts.

This restores the old behaviour, seems to be the only sane fix and mimics
a behaviour from other architectures where /proc/interrupts also contains
more than /proc/stat's "intr" line does.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-01-08 10:57:07 +01:00
Martin Schwidefsky 39efd4ec9a s390/ptrace: race of single stepping vs signal delivery
The current single step code is racy in regard to concurrent delivery
of signals. If a signal is delivered after a PER program check occurred
but before the TIF_PER_TRAP bit has been checked in entry[64].S the code
clears TIF_PER_TRAP and then calls do_signal. This is wrong, if the
instruction completed (or has been suppressed) a SIGTRAP should be
delivered to the debugger in any case. Only if the instruction has been
nullified the SIGTRAP may not be send.

The new logic always sets TIF_PER_TRAP if the program check indicates PER
tracing but removes it again for all program checks that are nullifying.
The effect is that for each change in the PSW address we now get a
single SIGTRAP.

Reported-by: Andreas Arnez <arnez@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-11-23 11:14:33 +01:00
Heiko Carstens 0a4ccc9929 s390/mm: move kernel_page_present/kernel_map_pages to page_attr.c
Keep related functions together and move to appropriate file.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-11-23 11:14:31 +01:00
Heiko Carstens 6b70a92080 s390/memory hotplug: use pfmf instruction to initialize storage keys
Move and rename init_storage_keys() to pageattr.c, so it can also be
used from the sclp memory hotplug code in order to initialize
storage keys.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-11-23 11:14:30 +01:00
Heiko Carstens a4f32bdbd9 s390/mm: keep fault_init() private to fault.c
Just convert fault_init() to an early initcall. That's still early
enough since it only needs be called before user space processes get
executed. No reason to externalize it.
Also add the function to the init section and move the store_indication
variable to the read_mostly section.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-11-23 11:14:29 +01:00
Heiko Carstens f7817968d0 s390/mm,vmemmap: use 1MB frames for vmemmap
Use 1MB frames for vmemmap if EDAT1 is available in order to
reduce TLB pressure
Always use a 1MB frame even if its only partially needed for
struct pages. Otherwise we would end up with a mix of large
frame and page mappings, because vmemmap_populate gets called
for each section (256MB -> 3.5MB memmap) separately.
Worst case is that we would waste 512KB.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-11-23 11:14:25 +01:00
Heiko Carstens 18da236908 s390/mm,vmem: use 2GB frames for identity mapping
Use 2GB frames for indentity mapping if EDAT2 is
available to reduce TLB pressure.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-11-23 11:14:24 +01:00
Heiko Carstens 516bad44b9 s390/gup: fix access_ok() usage in __get_user_pages_fast()
access_ok() returns always "true" on s390. Therefore all access_ok()
invocations are rather pointless.
However when walking page tables we need to make sure that everything
is within bounds of the ASCE limit of the task's address space.
So remove the access_ok() call and add the same check we have in
get_user_pages_fast().

Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-11-13 11:02:28 +01:00
Heiko Carstens d55c4c613f s390/gup: add missing TASK_SIZE check to get_user_pages_fast()
When walking page tables we need to make sure that everything
is within bounds of the ASCE limit of the task's address space.
Otherwise we might calculate e.g. a pud pointer which is not
within a pud and dereference it.
So check against TASK_SIZE (which is the ASCE limit) before
walking page tables.

Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-11-13 11:02:26 +01:00
Gerald Schaefer 156152f84e s390/mm: use pmd_large() instead of pmd_huge()
Without CONFIG_HUGETLB_PAGE, pmd_huge() will always return 0. So
pmd_large() should be used instead in places where both transparent
huge pages and hugetlbfs pages can occur.

Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-10-26 16:44:23 +02:00
Heiko Carstens fc7e48aad3 s390/mm,vmem: fix vmem_add_mem()/vmem_remove_range()
vmem_add_mem() should only then insert a large page if pmd_none() is true
for the specific entry. We might have a leftover from a previous mapping.
In addition make vmem_remove_range()'s page table walk code more complete
and fix a couple of potential endless loops (which can never happen :).

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-10-09 14:17:01 +02:00
Heiko Carstens c972cc60c2 s390/vmalloc: have separate modules area
Add a special module area on top of the vmalloc area, which may be only
used for modules and bpf jit generated code.
This makes sure that inter module branches will always happen without a
trampoline and in addition having all the code within a 2GB frame is
branch prediction unit friendly.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-10-09 14:17:01 +02:00
Heiko Carstens 8fe234d3c8 s390/mm: fix mapping of read-only kernel text section
Within the identity mapping the kernel text section is mapped read-only.
However when mapping the first and last page of the text section we must
round upwards and downwards respectively, if only parts of a page belong
to the section.
Otherwise potential rw data can be mapped read-only. So the rounding must
be done just the other way we have it right now.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-10-09 14:16:59 +02:00
Heiko Carstens e76e82d772 s390/mm: add page table dumper
This is more or less the same as the x86 page table dumper which was
merged four years ago: 926e5392 "x86: add code to dump the (kernel)
page tables for visual inspection by kernel developers".

We add a file at /sys/kernel/debug/kernel_page_tables for debugging
purposes so it's quite easy to see the kernel page table layout and
possible odd mappings:

---[ Identity Mapping ]---
0x0000000000000000-0x0000000000100000        1M PTE RW
---[ Kernel Image Start ]---
0x0000000000100000-0x0000000000800000        7M PMD RO
0x0000000000800000-0x00000000008a9000      676K PTE RO
0x00000000008a9000-0x0000000000900000      348K PTE RW
0x0000000000900000-0x0000000001500000       12M PMD RW
---[ Kernel Image End ]---
0x0000000001500000-0x0000000280000000    10219M PMD RW
0x0000000280000000-0x000003d280000000     3904G PUD I
---[ vmemmap Area ]---
0x000003d280000000-0x000003d288c00000      140M PTE RW
0x000003d288c00000-0x000003d300000000     1908M PMD I
0x000003d300000000-0x000003e000000000       52G PUD I
---[ vmalloc Area ]---
0x000003e000000000-0x000003e000009000       36K PTE RW
0x000003e000009000-0x000003e0000ee000      916K PTE I
0x000003e0000ee000-0x000003e000146000      352K PTE RW
0x000003e000146000-0x000003e000200000      744K PTE I
0x000003e000200000-0x000003e080000000     2046M PMD I
0x000003e080000000-0x0000040000000000      126G PUD I

This usually makes only sense for kernel developers. The output
with CONFIG_DEBUG_PAGEALLOC is not very helpful, because of the
huge number of mapped out pages, however I decided for the time
being to not add a !DEBUG_PAGEALLOC dependency.
Maybe it's helpful for somebody even with that option.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-10-09 14:16:58 +02:00
Heiko Carstens cc5b9a4518 s390/mm,pageattr: remove superfluous EXPORT_SYMBOLs
Remove some EXPORT_SYMBOLs. There is no module code anywhere
which calls these pageattr functions.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-10-09 14:16:57 +02:00
Heiko Carstens 5b1ba9e30c s390/mm,pageattr: add more page table walk sanity checks
The current page table walk code in pageattr.c only checks for large pages
while walking the kernel page table, but happily assumes that everything
else is just fine.
Add more checks so we never access invalid memory regions.

Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-10-09 14:16:57 +02:00
Heiko Carstens 378b1e7a80 s390/mm: fix pmd_huge() usage for kernel mapping
pmd_huge() will always return 0 on !HUGETLBFS, however we use that helper
function when walking the kernel page tables to decide if we have a
1MB page frame or not.
Since we create 1MB frames for the kernel 1:1 mapping independently of
HUGETLBFS this can lead to incorrect storage accesses since the code
can assume that we have a pointer to a page table instead of a pointer
to a 1MB frame.

Fix this by adding a pmd_large() primitive like other architectures have
it already and remove all references to HUGETLBFS/HUGETLBPAGE from the
code that walks kernel page tables.

Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-10-09 14:16:56 +02:00
Shaohua Li 45cac65b0f readahead: fault retry breaks mmap file read random detection
.fault now can retry.  The retry can break state machine of .fault.  In
filemap_fault, if page is miss, ra->mmap_miss is increased.  In the second
try, since the page is in page cache now, ra->mmap_miss is decreased.  And
these are done in one fault, so we can't detect random mmap file access.

Add a new flag to indicate .fault is tried once.  In the second try, skip
ra->mmap_miss decreasing.  The filemap_fault state machine is ok with it.

I only tested x86, didn't test other archs, but looks the change for other
archs is obvious, but who knows :)

Signed-off-by: Shaohua Li <shaohua.li@fusionio.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-09 16:22:47 +09:00
Gerald Schaefer 1ae1c1d09f thp, s390: architecture backend for thp on s390
This implements the architecture backend for transparent hugepages
on s390.

Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-09 16:22:31 +09:00
Gerald Schaefer 274023da1e thp, s390: disable thp for kvm host on s390
This patch is part of the architecture backend for thp on s390.  It
disables thp for kvm hosts, because there is no kvm host hugepage support
so far.  Existing thp mappings are split by follow_page() with FOLL_SPLIT,
and future thp mappings are prevented by setting VM_NOHUGEPAGE in
mm->def_flags.

Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-09 16:22:30 +09:00
Gerald Schaefer 9501d09fa3 thp, s390: thp pagetable pre-allocation for s390
This patch is part of the architecture backend for thp on s390.  It
provides the pagetable pre-allocation functions
pgtable_trans_huge_deposit() and pgtable_trans_huge_withdraw().  Unlike
other archs, s390 has no struct page * as pgtable_t, but rather a pointer
to the page table.  So instead of saving the pagetable pre- allocation
list info inside the struct page, it is being saved within the pagetable
itself.

Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-09 16:22:30 +09:00
Gerald Schaefer 75077afbec thp, s390: thp splitting backend for s390
This patch is part of the architecture backend for thp on s390.  It
provides the functions related to thp splitting, including serialization
against gup.  Unlike other archs, pmdp_splitting_flush() cannot use a tlb
flushing operation to serialize against gup on s390, because that wouldn't
be stopped by the disabled IRQs.  So instead, smp_call_function() is
called with an empty function, which will have the expected effect.

Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-09 16:22:30 +09:00
Heiko Carstens 5e249d6e11 s390/mm: mark free_initrd_mem() as __init
Same as 0d26d1d8 "x86/mm: Mark free_initrd_mem() as __init".
In addition also add the __init annotation to setup_zero_pages().

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26 15:45:27 +02:00
Heiko Carstens 41459d36cf s390: add uninitialized_var() to suppress false positive compiler warnings
Get rid of these:

arch/s390/kernel/smp.c:134:19: warning: ‘status’ may be used uninitialized in this function [-Wuninitialized]
arch/s390/mm/pgtable.c:641:10: warning: ‘table’ may be used uninitialized in this function [-Wuninitialized]
arch/s390/mm/pgtable.c:644:12: warning: ‘page’ may be used uninitialized in this function [-Wuninitialized]
drivers/s390/cio/cio.c:1037:14: warning: ‘schid’ may be used uninitialized in this function [-Wuninitialized]

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26 15:45:23 +02:00
Heiko Carstens eb608fb366 s390/exceptions: switch to relative exception table entries
This is the s390 port of 70627654 "x86, extable: Switch to relative
exception table entries".
Reduces the size of our exception tables by 50% on 64 bit builds.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26 15:45:10 +02:00
Gerald Schaefer 34cda99260 s390/mm: implement __get_user_pages_fast()
This patch introduces the __get_user_pages_fast() function on s390,
which will be needed with CONFIG_TRANSPARENT_HUGEPAGE and futex.

Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26 15:45:08 +02:00
Heiko Carstens d1b0d842c4 s390/mm: rename addressing_mode to s390_user_mode
Renaming the globally visible variable "user_mode" to "addressing_mode" in
order to fix a name clash was not a good idea. (Commit 37fe1d73 "s390/mm:
rename user_mode variable to addressing_mode")
Looking at the code after a couple of weeks one thinks: addressing mode of
what?
So rename the variable again. This time to s390_user_mode. Which hopefully
makes more sense.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26 15:45:05 +02:00
Heiko Carstens 1c725922dd s390/cpu hotplug: mask out CPU_TASKS_FROZEN in cu hotplug notifiers
Unify all our cpu hotplug notifiers to mask out the CPU_TASKS_FROZEN
bit, so we don't have to add all the *_FROZEN variant cases to the
notifiers.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26 15:44:53 +02:00