Commit Graph

345 Commits

Author SHA1 Message Date
Linus Torvalds 73ecf3a6e3 Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (49 commits)
  serial8250: ratelimit "too much work" error
  serial: bfin_sport_uart: speed up sport RX sample rate to be 3% faster
  serial: abstraction for 8250 legacy ports
  serial/imx: check that the buffer is non-empty before sending it out
  serial: mfd: add more baud rates support
  jsm: Remove the uart port on errors
  Alchemy: Add UART PM methods.
  8250: allow platforms to override PM hook.
  altera_uart: Don't use plain integer as NULL pointer
  altera_uart: Fix missing prototype for registering an early console
  altera_uart: Fixup type usage of port flags
  altera_uart: Make it possible to use Altera UART and 8250 ports together
  altera_uart: Add support for different address strides
  altera_uart: Add support for getting mapbase and IRQ from resources
  altera_uart: Add support for polling mode (IRQ-less)
  serial: Factor out uart_poll_timeout() from 8250 driver
  serial: mark the 8250 driver as maintained
  serial: 8250: Don't delay after transmitter is ready.
  tty: MAINTAINERS: add drivers/serial/jsm/ as maintained driver
  vcs: invoke the vt update callback when /dev/vcs* is written to
  ...
2010-10-22 19:59:04 -07:00
Jeff Mahoney 4735d23495 ioctl: Use asm-generic/ioctls.h on frv (enables termiox)
This patch converts frv to use asm-generic/ioctls.h instead of its
own version.

The differences between the arch-specific version and the generic
version are as follows:

- FRV defines its own value for FIOQSIZE, asm-generic/ioctls.h keeps it
- FRV defines TIOCTTYGSTRUCT, kept in arch-specific version
- The generic version provides TIOCGRS485 and TIOCSRS485 but they
  are unused by any driver available for this architecture.
- The generic version adds support for termiox

Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22 10:20:00 -07:00
Linus Torvalds e36f561a2c Merge git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-irqflags
* git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-irqflags:
  Fix IRQ flag handling naming
  MIPS: Add missing #inclusions of <linux/irq.h>
  smc91x: Add missing #inclusion of <linux/irq.h>
  Drop a couple of unnecessary asm/system.h inclusions
  SH: Add missing consts to sys_execve() declaration
  Blackfin: Rename IRQ flags handling functions
  Blackfin: Add missing dep to asm/irqflags.h
  Blackfin: Rename DES PC2() symbol to avoid collision
  Blackfin: Split the BF532 BFIN_*_FIO_FLAG() functions to their own header
  Blackfin: Split PLL code from mach-specific cdef headers
2010-10-21 14:37:27 -07:00
Peter Zijlstra e360adbe29 irq_work: Add generic hardirq context callbacks
Provide a mechanism that allows running code in IRQ context. It is
most useful for NMI code that needs to interact with the rest of the
system -- like wakeup a task to drain buffers.

Perf currently has such a mechanism, so extract that and provide it as
a generic feature, independent of perf so that others may also
benefit.

The IRQ context callback is generated through self-IPIs where
possible, or on architectures like powerpc the decrementer (the
built-in timer facility) is set to generate an interrupt immediately.

Architectures that don't have anything like this get to do with a
callback from the timer tick. These architectures can call
irq_work_run() at the tail of any IRQ handlers that might enqueue such
work (like the perf IRQ handler) to avoid undue latencies in
processing the work.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Kyle McMartin <kyle@mcmartin.ca>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
[ various fixes ]
Signed-off-by: Huang Ying <ying.huang@intel.com>
LKML-Reference: <1287036094.7768.291.camel@yhuang-dev>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-10-18 19:58:50 +02:00
David Howells df9ee29270 Fix IRQ flag handling naming
Fix the IRQ flag handling naming.  In linux/irqflags.h under one configuration,
it maps:

	local_irq_enable() -> raw_local_irq_enable()
	local_irq_disable() -> raw_local_irq_disable()
	local_irq_save() -> raw_local_irq_save()
	...

and under the other configuration, it maps:

	raw_local_irq_enable() -> local_irq_enable()
	raw_local_irq_disable() -> local_irq_disable()
	raw_local_irq_save() -> local_irq_save()
	...

This is quite confusing.  There should be one set of names expected of the
arch, and this should be wrapped to give another set of names that are expected
by users of this facility.

Change this to have the arch provide:

	flags = arch_local_save_flags()
	flags = arch_local_irq_save()
	arch_local_irq_restore(flags)
	arch_local_irq_disable()
	arch_local_irq_enable()
	arch_irqs_disabled_flags(flags)
	arch_irqs_disabled()
	arch_safe_halt()

Then linux/irqflags.h wraps these to provide:

	raw_local_save_flags(flags)
	raw_local_irq_save(flags)
	raw_local_irq_restore(flags)
	raw_local_irq_disable()
	raw_local_irq_enable()
	raw_irqs_disabled_flags(flags)
	raw_irqs_disabled()
	raw_safe_halt()

with type checking on the flags 'arguments', and then wraps those to provide:

	local_save_flags(flags)
	local_irq_save(flags)
	local_irq_restore(flags)
	local_irq_disable()
	local_irq_enable()
	irqs_disabled_flags(flags)
	irqs_disabled()
	safe_halt()

with tracing included if enabled.

The arch functions can now all be inline functions rather than some of them
having to be macros.

Signed-off-by: David Howells <dhowells@redhat.com> [X86, FRV, MN10300]
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> [Tile]
Signed-off-by: Michal Simek <monstr@monstr.eu> [Microblaze]
Tested-by: Catalin Marinas <catalin.marinas@arm.com> [ARM]
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> [AVR]
Acked-by: Tony Luck <tony.luck@intel.com> [IA-64]
Acked-by: Hirokazu Takata <takata@linux-m32r.org> [M32R]
Acked-by: Greg Ungerer <gerg@uclinux.org> [M68K/M68KNOMMU]
Acked-by: Ralf Baechle <ralf@linux-mips.org> [MIPS]
Acked-by: Kyle McMartin <kyle@mcmartin.ca> [PA-RISC]
Acked-by: Paul Mackerras <paulus@samba.org> [PowerPC]
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> [S390]
Acked-by: Chen Liqin <liqin.chen@sunplusct.com> [Score]
Acked-by: Matt Fleming <matt@console-pimps.org> [SH]
Acked-by: David S. Miller <davem@davemloft.net> [Sparc]
Acked-by: Chris Zankel <chris@zankel.net> [Xtensa]
Reviewed-by: Richard Henderson <rth@twiddle.net> [Alpha]
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp> [H8300]
Cc: starvik@axis.com [CRIS]
Cc: jesper.nilsson@axis.com [CRIS]
Cc: linux-cris-kernel@axis.com
2010-10-07 14:08:55 +01:00
Al Viro ed1cde6836 frv: double syscall restarts, syscall restart in sigreturn()
We need to make sure that only the first do_signal() to be handled on
the way out syscall will bother with syscall restarts; additionally, the
check on the "signal has user handler" path had been wrong - compare
with restart prevention in sigreturn()...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-20 10:44:38 -07:00
Al Viro 44c7afffa4 frv: handling of restart into restart_syscall is fscked
do_signal() should place the syscall number in gr7, not gr8 when
handling ERESTART_WOULDBLOCK.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-20 10:44:38 -07:00
Al Viro ad0acab455 frv: avoid infinite loop of SIGSEGV delivery
Use force_sigsegv() rather than force_sig(SIGSEGV, ...) as the former
resets the SEGV handler pointer which will kill the process, rather than
leaving it open to an infinite loop if the SEGV handler itself caused a
SEGV signal.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-20 10:44:37 -07:00
Al Viro 5f4ad04a1e frv: fix address verification holes in setup_frame/setup_rt_frame
a) sa_handler might be maliciously set to point to kernel memory;
   blindly dereferencing it in FDPIC case is a Bad Idea(tm).

b) I'm not sure you need that set_fs(USER_DS) there at all, but if you
   do, you'd better do it *before* checking the frame you've decided to
   use with access_ok(), lest sigaltstack() becomes a convenient
   roothole.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-20 10:44:37 -07:00
Al Viro 20cd514d0f frv: restart_block.fn needs to be reset on sigreturn
Reset restart_block.fn on executing a sigreturn such that any currently
pending system call restarts will be forced to return -EINTR.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-20 10:44:37 -07:00
David Howells d7627467b7 Make do_execve() take a const filename pointer
Make do_execve() take a const filename pointer so that kernel_execve() compiles
correctly on ARM:

arch/arm/kernel/sys_arm.c:88: warning: passing argument 1 of 'do_execve' discards qualifiers from pointer target type

This also requires the argv and envp arguments to be consted twice, once for
the pointer array and once for the strings the array points to.  This is
because do_execve() passes a pointer to the filename (now const) to
copy_strings_kernel().  A simpler alternative would be to cast the filename
pointer in do_execve() when it's passed to copy_strings_kernel().

do_execve() may not change any of the strings it is passed as part of the argv
or envp lists as they are some of them in .rodata, so marking these strings as
const should be fine.

Further kernel_execve() and sys_execve() need to be changed to match.

This has been test built on x86_64, frv, arm and mips.

Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-17 18:07:43 -07:00
Sam Ravnborg 8b1bb90701 defconfig reduction
Use the defconfig files generated by "make savedefconfig" for
remaining defconfig files.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2010-08-14 22:26:53 +02:00
Sam Ravnborg bf56fba670 archs: replace unifdef-y with header-y
unifdef-y and header-y have same semantic, so drop unifdef-y

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2010-08-14 22:26:51 +02:00
David Howells c788732523 Mark arguments to certain syscalls as being const
Mark arguments to certain system calls as being const where they should be but
aren't.  The list includes:

 (*) The filename arguments of various stat syscalls, execve(), various utimes
     syscalls and some mount syscalls.

 (*) The filename arguments of some syscall helpers relating to the above.

 (*) The buffer argument of various write syscalls.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-13 16:53:13 -07:00
FUJITA Tomonori 3b9c6c11f5 dma-mapping: remove dma_is_consistent API
Architectures implement dma_is_consistent() in different ways (some
misinterpret the definition of API in DMA-API.txt).  So it hasn't been so
useful for drivers.  We have only one user of the API in tree.  Unlikely
out-of-tree drivers use the API.

Even if we fix dma_is_consistent() in some architectures, it doesn't look
useful at all.  It was invented long ago for some old systems that can't
allocate coherent memory at all.  It's better to export only APIs that are
definitely necessary for drivers.

Let's remove this API.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11 08:59:21 -07:00
FUJITA Tomonori 4565f0170d dma-mapping: unify dma_get_cache_alignment implementations
dma_get_cache_alignment returns the minimum DMA alignment.  Architectures
defines it as ARCH_DMA_MINALIGN (formally ARCH_KMALLOC_MINALIGN).  So we
can unify dma_get_cache_alignment implementations.

Note that some architectures implement dma_get_cache_alignment wrongly.
dma_get_cache_alignment() should return the minimum DMA alignment.  So
fully-coherent architectures should return 1.  This patch also fixes this
issue.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11 08:59:21 -07:00
FUJITA Tomonori a6eb9fe105 dma-mapping: rename ARCH_KMALLOC_MINALIGN to ARCH_DMA_MINALIGN
Now each architecture has the own dma_get_cache_alignment implementation.

dma_get_cache_alignment returns the minimum DMA alignment.  Architectures
define it as ARCH_KMALLOC_MINALIGN (it's used to make sure that malloc'ed
buffer is DMA-safe; the buffer doesn't share a cache with the others).  So
we can unify dma_get_cache_alignment implementations.

This patch:

dma_get_cache_alignment() needs to know if an architecture defines
ARCH_KMALLOC_MINALIGN or not (needs to know if architecture has DMA
alignment restriction).  However, slab.h define ARCH_KMALLOC_MINALIGN if
architectures doesn't define it.

Let's rename ARCH_KMALLOC_MINALIGN to ARCH_DMA_MINALIGN.
ARCH_KMALLOC_MINALIGN is used only in the internals of slab/slob/slub
(except for crypto).

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11 08:59:21 -07:00
Linus Torvalds 2f9e825d3e Merge branch 'for-2.6.36' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.36' of git://git.kernel.dk/linux-2.6-block: (149 commits)
  block: make sure that REQ_* types are seen even with CONFIG_BLOCK=n
  xen-blkfront: fix missing out label
  blkdev: fix blkdev_issue_zeroout return value
  block: update request stacking methods to support discards
  block: fix missing export of blk_types.h
  writeback: fix bad _bh spinlock nesting
  drbd: revert "delay probes", feature is being re-implemented differently
  drbd: Initialize all members of sync_conf to their defaults [Bugz 315]
  drbd: Disable delay probes for the upcomming release
  writeback: cleanup bdi_register
  writeback: add new tracepoints
  writeback: remove unnecessary init_timer call
  writeback: optimize periodic bdi thread wakeups
  writeback: prevent unnecessary bdi threads wakeups
  writeback: move bdi threads exiting logic to the forker thread
  writeback: restructure bdi forker loop a little
  writeback: move last_active to bdi
  writeback: do not remove bdi from bdi_list
  writeback: simplify bdi code a little
  writeback: do not lose wake-ups in bdi threads
  ...

Fixed up pretty trivial conflicts in drivers/block/virtio_blk.c and
drivers/scsi/scsi_error.c as per Jens.
2010-08-10 15:22:42 -07:00
hyc@symas.com 26df6d1340 tty: Add EXTPROC support for LINEMODE
This patch is against the 2.6.34 source.

Paraphrased from the 1989 BSD patch by David Borman @ cray.com:

     These are the changes needed for the kernel to support
     LINEMODE in the server.

     There is a new bit in the termios local flag word, EXTPROC.
     When this bit is set, several aspects of the terminal driver
     are disabled.  Input line editing, character echo, and mapping
     of signals are all disabled.  This allows the telnetd to turn
     off these functions when in linemode, but still keep track of
     what state the user wants the terminal to be in.

     New ioctl:
         TIOCSIG         Generate a signal to processes in the
                         current process group of the pty.

     There is a new mode for packet driver, the TIOCPKT_IOCTL bit.
     When packet mode is turned on in the pty, and the EXTPROC bit
     is set, then whenever the state of the pty is changed, the
     next read on the master side of the pty will have the TIOCPKT_IOCTL
     bit set.  This allows the process on the server side of the pty
     to know when the state of the terminal has changed; it can then
     issue the appropriate ioctl to retrieve the new state.

Since the original BSD patches accompanied the source code for telnet
I've left that reference here, but obviously the feature is useful for
any remote terminal protocol, including ssh.

The corresponding feature has existed in the BSD tty driver since 1989.
For historical reference, a good copy of the relevant files can be found
here:

http://anonsvn.mit.edu/viewvc/krb5/trunk/src/appl/telnet/?pathrev=17741

Signed-off-by: Howard Chu <hyc@symas.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10 13:47:39 -07:00
Cesar Eduardo Barros 597781f3e5 kmap_atomic: make kunmap_atomic() harder to misuse
kunmap_atomic() is currently at level -4 on Rusty's "Hard To Misuse"
list[1] ("Follow common convention and you'll get it wrong"), except in
some architectures when CONFIG_DEBUG_HIGHMEM is set[2][3].

kunmap() takes a pointer to a struct page; kunmap_atomic(), however, takes
takes a pointer to within the page itself.  This seems to once in a while
trip people up (the convention they are following is the one from
kunmap()).

Make it much harder to misuse, by moving it to level 9 on Rusty's list[4]
("The compiler/linker won't let you get it wrong").  This is done by
refusing to build if the type of its first argument is a pointer to a
struct page.

The real kunmap_atomic() is renamed to kunmap_atomic_notypecheck()
(which is what you would call in case for some strange reason calling it
with a pointer to a struct page is not incorrect in your code).

The previous version of this patch was compile tested on x86-64.

[1] http://ozlabs.org/~rusty/index.cgi/tech/2008-04-01.html
[2] In these cases, it is at level 5, "Do it right or it will always
    break at runtime."
[3] At least mips and powerpc look very similar, and sparc also seems to
    share a common ancestor with both; there seems to be quite some
    degree of copy-and-paste coding here. The include/asm/highmem.h file
    for these three archs mention x86 CPUs at its top.
[4] http://ozlabs.org/~rusty/index.cgi/tech/2008-03-30.html
[5] As an aside, could someone tell me why mn10300 uses unsigned long as
    the first parameter of kunmap_atomic() instead of void *?

Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net>
Cc: Russell King <linux@arm.linux.org.uk> (arch/arm)
Cc: Ralf Baechle <ralf@linux-mips.org> (arch/mips)
Cc: David Howells <dhowells@redhat.com> (arch/frv, arch/mn10300)
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> (arch/mn10300)
Cc: Kyle McMartin <kyle@mcmartin.ca> (arch/parisc)
Cc: Helge Deller <deller@gmx.de> (arch/parisc)
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> (arch/parisc)
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> (arch/powerpc)
Cc: Paul Mackerras <paulus@samba.org> (arch/powerpc)
Cc: "David S. Miller" <davem@davemloft.net> (arch/sparc)
Cc: Thomas Gleixner <tglx@linutronix.de> (arch/x86)
Cc: Ingo Molnar <mingo@redhat.com> (arch/x86)
Cc: "H. Peter Anvin" <hpa@zytor.com> (arch/x86)
Cc: Arnd Bergmann <arnd@arndb.de> (include/asm-generic)
Cc: Rusty Russell <rusty@rustcorp.com.au> ("Hard To Misuse" list)
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-09 20:44:54 -07:00
FUJITA Tomonori 7e005f7979 remove needless ISA_DMA_THRESHOLD
Architectures don't need to define ISA_DMA_THRESHOLD anymore.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: James Bottomley <James.Bottomley@suse.de>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:15:50 +02:00
Linus Torvalds b62ad9ab18 Merge branch 'timers-timekeeping-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'timers-timekeeping-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  um: Fix read_persistent_clock fallout
  kgdb: Do not access xtime directly
  powerpc: Clean up obsolete code relating to decrementer and timebase
  powerpc: Rework VDSO gettimeofday to prevent time going backwards
  clocksource: Add __clocksource_updatefreq_hz/khz methods
  x86: Convert common clocksources to use clocksource_register_hz/khz
  timekeeping: Make xtime and wall_to_monotonic static
  hrtimer: Cleanup direct access to wall_to_monotonic
  um: Convert to use read_persistent_clock
  timkeeping: Fix update_vsyscall to provide wall_to_monotonic offset
  powerpc: Cleanup xtime usage
  powerpc: Simplify update_vsyscall
  time: Kill off CONFIG_GENERIC_TIME
  time: Implement timespec_add
  x86: Fix vtime/file timestamp inconsistencies

Trivial conflicts in Documentation/feature-removal-schedule.txt

Much less trivial conflicts in arch/powerpc/kernel/time.c resolved as
per Thomas' earlier merge commit 47916be4e2 ("Merge branch
'powerpc.cherry-picks' into timers/clocksource")
2010-08-06 13:18:29 -07:00
Linus Torvalds 4aed2fd8e3 Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (162 commits)
  tracing/kprobes: unregister_trace_probe needs to be called under mutex
  perf: expose event__process function
  perf events: Fix mmap offset determination
  perf, powerpc: fsl_emb: Restore setting perf_sample_data.period
  perf, powerpc: Convert the FSL driver to use local64_t
  perf tools: Don't keep unreferenced maps when unmaps are detected
  perf session: Invalidate last_match when removing threads from rb_tree
  perf session: Free the ref_reloc_sym memory at the right place
  x86,mmiotrace: Add support for tracing STOS instruction
  perf, sched migration: Librarize task states and event headers helpers
  perf, sched migration: Librarize the GUI class
  perf, sched migration: Make the GUI class client agnostic
  perf, sched migration: Make it vertically scrollable
  perf, sched migration: Parameterize cpu height and spacing
  perf, sched migration: Fix key bindings
  perf, sched migration: Ignore unhandled task states
  perf, sched migration: Handle ignored migrate out events
  perf: New migration tool overview
  tracing: Drop cpparg() macro
  perf: Use tracepoint_synchronize_unregister() to flush any pending tracepoint call
  ...

Fix up trivial conflicts in Makefile and drivers/cpufreq/cpufreq.c
2010-08-06 09:30:52 -07:00
Michal Marek 772320e845 Merge commit 'v2.6.35' into kbuild/kbuild
Conflicts:
	arch/powerpc/Makefile
2010-08-04 13:59:13 +02:00
Sam Ravnborg c9575dc680 frv: clean up arch/frv/Makefile
- removed a lot of unused variable assignmnets
- removed unused bootstrap target
- replaced ARCHMODFLAGS with proper KBUILD_{A,C}FLAGS_MODULE assignmnets

The resuting Makefile has not been tested due to lack of toolchain,
but these were all trivial changes.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-03 14:09:45 +02:00
John Stultz 592913ecb8 time: Kill off CONFIG_GENERIC_TIME
Now that all arches have been converted over to use generic time via
clocksources or arch_gettimeoffset(), we can remove the GENERIC_TIME
config option and simplify the generic code.

Signed-off-by: John Stultz <johnstul@us.ibm.com>
LKML-Reference: <1279068988-21864-4-git-send-email-johnstul@us.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-07-27 12:40:54 +02:00
Ingo Molnar 646b1db495 Merge commit 'v2.6.35-rc3' into perf/core
Merge reason: Go from -rc1 base to -rc3 base, merge in fixes.
2010-06-18 10:53:19 +02:00
David Howells a7f5378e24 FRV: Reinstate null behaviour for the GDB remote protocol 'p' command
Reinstate the null behaviour that the in-kernel gdbstub had for the GDB
remote protocol 'p' command (retrieve a single register value) prior to
commit 7ca8b9c0da ("frv: extend gdbstub to support more features of
gdb").

Before that, the 'p' command just returned an empty reply, which causes
gdb to then go and use the 'g' command.  However, since that commit, the
'p' command returns an error string, which causes gdb to abort its
connection to the target.

Not all gdb versions are affected, some use try 'g' first, and if that
works, don't bother with 'p', and so don't see the error.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-06-09 12:42:44 -07:00
Peter Zijlstra 1996bda2a4 arch: Implement local64_t
On 64bit, local_t is of size long, and thus we make local64_t an alias.
On 32bit, we fall back to atomic64_t. (architecture can provide optimized
32-bit version)

(This new facility is to be used by perf events optimizations.)

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: linux-arch@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-06-09 11:12:36 +02:00
Nick Piggin f9c497c4ae frv: invoke oom-killer from page fault
As explained in commit 1c0fe6e3bd ("mm: invoke oom-killer from page
fault") , we want to call the architecture independent oom killer when
getting an unexplained OOM from handle_mm_fault, rather than simply
killing current.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: David Howells <dhowells@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-06-04 15:21:44 -07:00
Linus Torvalds 1f73897861 Merge branch 'for-35' of git://repo.or.cz/linux-kbuild
* 'for-35' of git://repo.or.cz/linux-kbuild: (81 commits)
  kbuild: Revert part of e8d400a to resolve a conflict
  kbuild: Fix checking of scm-identifier variable
  gconfig: add support to show hidden options that have prompts
  menuconfig: add support to show hidden options which have prompts
  gconfig: remove show_debug option
  gconfig: remove dbg_print_ptype() and dbg_print_stype()
  kconfig: fix zconfdump()
  kconfig: some small fixes
  add random binaries to .gitignore
  kbuild: Include gen_initramfs_list.sh and the file list in the .d file
  kconfig: recalc symbol value before showing search results
  .gitignore: ignore *.lzo files
  headerdep: perlcritic warning
  scripts/Makefile.lib: Align the output of LZO
  kbuild: Generate modules.builtin in make modules_install
  Revert "kbuild: specify absolute paths for cscope"
  kbuild: Do not unnecessarily regenerate modules.builtin
  headers_install: use local file handles
  headers_check: fix perl warnings
  export_report: fix perl warnings
  ...
2010-06-01 08:55:52 -07:00
David Howells 8507bb0062 FRV: ARCH_KMALLOC_MINALIGN was already defined
ARCH_KMALLOC_MINALIGN was already defined in asm/mem-layout.h and so shouldn't
have been added to asm/cache.h as well, but rather altered in place.

The commit that added it to asm/cache.h was:

	commit 69dcf3db03
	Author: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
	Date:   Mon May 24 14:32:54 2010 -0700

	    frv: set ARCH_KMALLOC_MINALIGN

	    Architectures that handle DMA-non-coherent memory need to set
	    ARCH_KMALLOC_MINALIGN to make sure that kmalloc'ed buffer is
	    DMA-safe: the buffer doesn't share a cache with the others.

Signed-off-by: David Howells <dhowells@redhat.com>
cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-28 10:17:21 -07:00
Jan Blunck fc2444756a frv: remove "struct file *" argument from sysctl ->proc_handler
Signed-off-by: Jan Blunck <jblunck@suse.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 09:12:56 -07:00
FUJITA Tomonori 3e6e3da8d5 frv: use asm-generic/scatterlist.h
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 09:12:55 -07:00
Mike Frysinger 9c1a125921 ptrace: unify FDPIC implementations
The Blackfin/FRV/SuperH guys all have the same exact FDPIC ptrace code in
their arch handlers (since they were probably copied & pasted).  Since
these ptrace interfaces are an arch independent aspect of the FDPIC code,
unify them in the common ptrace code so new FDPIC ports don't need to copy
and paste this fundamental stuff yet again.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Roland McGrath <roland@redhat.com>
Acked-by: David Howells <dhowells@redhat.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 09:12:44 -07:00
FUJITA Tomonori 69dcf3db03 frv: set ARCH_KMALLOC_MINALIGN
Architectures that handle DMA-non-coherent memory need to set
ARCH_KMALLOC_MINALIGN to make sure that kmalloc'ed buffer is DMA-safe: the
buffer doesn't share a cache with the others.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: David Howells <dhowells@redhat.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-25 08:07:02 -07:00
David Howells 7ca8b9c0da frv: extend gdbstub to support more features of gdb
Extend gdbstub to support more features of gdb remote protocol to keep
gdb-7 and emacs gud mode happy:

 (*) The D command.  Detach debugger.

 (*) The H command.  Handle setting the target thread by ignoring it.

 (*) The qAttached command.  Indicate we 'attached' to an existing process.

 (*) The qC command.  Indicate that the current thread ID is 0.

 (*) The qOffsets command.  Indicate that no relocation has been done.

 (*) The qSymbol:: command.  Indicate that we're not interested in looking up
     any symbol addresses.

 (*) The qSupported command.  Indicate the maximum packet size and the fact
     that reverse step and continue aren't supported.

 (*) The vCont? command.  Indicate that we don't support any of its variants.

Also make it possible to trace the commands and replies without tracing
the individual character I/O.

[akpm@linux-foundation.org: make gdbstub_handle_query() static]
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-25 08:07:02 -07:00
Linus Torvalds f39d01be4c Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (44 commits)
  vlynq: make whole Kconfig-menu dependant on architecture
  add descriptive comment for TIF_MEMDIE task flag declaration.
  EEPROM: max6875: Header file cleanup
  EEPROM: 93cx6: Header file cleanup
  EEPROM: Header file cleanup
  agp: use NULL instead of 0 when pointer is needed
  rtc-v3020: make bitfield unsigned
  PCI: make bitfield unsigned
  jbd2: use NULL instead of 0 when pointer is needed
  cciss: fix shadows sparse warning
  doc: inode uses a mutex instead of a semaphore.
  uml: i386: Avoid redefinition of NR_syscalls
  fix "seperate" typos in comments
  cocbalt_lcdfb: correct sections
  doc: Change urls for sparse
  Powerpc: wii: Fix typo in comment
  i2o: cleanup some exit paths
  Documentation/: it's -> its where appropriate
  UML: Fix compiler warning due to missing task_struct declaration
  UML: add kernel.h include to signal.c
  ...
2010-05-20 09:20:59 -07:00
Linus Torvalds 7d02093e29 Merge branch 'timers-for-linus-cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'timers-for-linus-cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  avr32: Fix typo in read_persistent_clock()
  sparc: Convert sparc to use read/update_persistent_clock
  cris: Convert cris to use read/update_persistent_clock
  m68k: Convert m68k to use read/update_persistent_clock
  m32r: Convert m32r to use read/update_peristent_clock
  blackfin: Convert blackfin to use read/update_persistent_clock
  ia64: Convert ia64 to use read/update_persistent_clock
  avr32: Convert avr32 to use read/update_persistent_clock
  h8300: Convert h8300 to use read/update_persistent_clock
  frv: Convert frv to use read/update_persistent_clock
  mn10300: Convert mn10300 to use read/update_persistent_clock
  alpha: Convert alpha to use read/update_persistent_clock
  xtensa: Fix unnecessary setting of xtime
  time: Clean up direct xtime usage in xen
2010-05-19 17:10:06 -07:00
Anton Blanchard f3d46f9d31 atomic_t: Cast to volatile when accessing atomic variables
In preparation for removing volatile from the atomic_t definition, this
patch adds a volatile cast to all the atomic read functions.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-17 07:57:27 -07:00
Andreas Dilger 0ddc9324b1 add descriptive comment for TIF_MEMDIE task flag declaration.
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-14 11:13:27 +02:00
David Howells 08dc179b9b frv: fix kernel/user segment handling in NOMMU mode
In NOMMU mode, the FRV segment handling is broken because KERNEL_DS ==
USER_DS.  This causes tests of the following sort:

	/* don't pin down non-user-based iovecs */
	if (segment_eq(get_fs(), KERNEL_DS))
		return NULL;

to malfunction.

To fix this, make USER_DS the top of RAM instead of the top of the non-IO
address space, and make KERNEL_DS one more than the top of the non-IO
address space.

Also get rid of FRV's __addr_ok() as nothing uses it.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-07 08:38:05 -07:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
David Howells f7454c5d5c frv/chris: fix lines with a missing semicolons
Commit b26b2d494b ("resource/PCI: align functions now return start
of resource") added lines with missing semicolons.

Add the missing semicolons to the FRV and CRIS arch code.

Signed-off-by: David Howells <dhowells@redhat.com>
Cc: linux@dominikbrodowski.net
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-29 09:37:14 -07:00
Bjorn Helgaas 99f4692e13 frv/PCI: remove redundant warnings
pci_claim_resource() already prints more detailed error messages, so these
are really redundant.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-03-25 08:51:40 -07:00
John Stultz 739b27116a frv: Convert frv to use read/update_persistent_clock
This patch converts the frv architecture to use the generic
read_persistent_clock and update_persistent_clock interfaces, reducing
the amount of arch specific code we have to maintain, and allowing for
further cleanups in the future.

I have not built or tested this patch, so help from arch maintainers
would be appreciated.

Signed-off-by: John Stultz <johnstul@us.ibm.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <1267675049-12337-4-git-send-email-johnstul@us.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-03-13 01:14:09 +01:00
FUJITA Tomonori 027491f4b2 dma-mapping: frv: remove the obsolete and unnecessary DMA API comments
pci_dma_sync_single was obsoleted long ago.

All the comments are generic, not architecture specific, simply describes
some of the DMA-API (and frv has the same comments in three files).
Documentation/DMA-API.txt have more detailed descriptions.

This removes the above obsolete and unnecessary DMA API comments.  Let's
describe the DMA API in only Documentation/DMA-API.txt.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: David Howells <dhowells@redhat.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12 15:52:42 -08:00
FUJITA Tomonori f41b177157 pci-dma: add linux/pci-dma.h to linux/pci.h
All the architectures properly set NEED_DMA_MAP_STATE now so we can safely
add linux/pci-dma.h to linux/pci.h and remove the linux/pci-dma.h
inclusion in arch's asm/pci.h

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12 15:52:42 -08:00
FUJITA Tomonori 272ecbe591 pci-dma: frv: use include/linux/pci-dma.h
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: David Howells <dhowells@redhat.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12 15:52:41 -08:00
Christoph Hellwig dacbe41f77 ptrace: move user_enable_single_step & co prototypes to linux/ptrace.h
While in theory user_enable_single_step/user_disable_single_step/
user_enable_blockstep could also be provided as an inline or macro there's
no good reason to do so, and having the prototype in one places keeps code
size and confusion down.

Roland said:

  The original thought there was that user_enable_single_step() et al
  might well be only an instruction or three on a sane machine (as if we
  have any of those!), and since there is only one call site inlining
  would be beneficial.  But I agree that there is no strong reason to care
  about inlining it.

  As to the arch changes, there is only one thought I'd add to the
  record.  It was always my thinking that for an arch where
  PTRACE_SINGLESTEP does text-modifying breakpoint insertion,
  user_enable_single_step() should not be provided.  That is,
  arch_has_single_step()=>true means that there is an arch facility with
  "pure" semantics that does not have any unexpected side effects.
  Inserting a breakpoint might do very unexpected strange things in
  multi-threaded situations.  Aside from that, it is a peculiar side
  effect that user_{enable,disable}_single_step() should cause COW
  de-sharing of text pages and so forth.  For PTRACE_SINGLESTEP, all these
  peculiarities are the status quo ante for that arch, so having
  arch_ptrace() itself do those is one thing.  But for building other
  things in the future, it is nicer to have a uniform "pure" semantics
  that arch-independent code can expect.

  OTOH, all such arch issues are really up to the arch maintainer.  As
  of today, there is nothing but ptrace using user_enable_single_step() et
  al so it's a distinction without a practical difference.  If/when there
  are other facilities that use user_enable_single_step() and might care,
  the affected arch's can revisit the question when someone cares about
  the quality of the arch support for said new facility.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12 15:52:38 -08:00