mirror of https://gitee.com/openkylin/linux.git
8594 Commits
Author | SHA1 | Message | Date |
---|---|---|---|
Linus Torvalds | c8d0267efd |
PCI changes for the v4.8 merge window:
Enumeration Move ecam.h to linux/include/pci-ecam.h (Jayachandran C) Add parent device field to ECAM struct pci_config_window (Jayachandran C) Add generic MCFG table handling (Tomasz Nowicki) Refactor pci_bus_assign_domain_nr() for CONFIG_PCI_DOMAINS_GENERIC (Tomasz Nowicki) Factor DT-specific pci_bus_find_domain_nr() code out (Tomasz Nowicki) Resource management Add devm_request_pci_bus_resources() (Bjorn Helgaas) Unify pci_resource_to_user() declarations (Bjorn Helgaas) Implement pci_resource_to_user() with pcibios_resource_to_bus() (microblaze, powerpc, sparc) (Bjorn Helgaas) Request host bridge window resources (designware, iproc, rcar, xgene, xilinx, xilinx-nwl) (Bjorn Helgaas) Make PCI I/O space optional on ARM32 (Bjorn Helgaas) Ignore write combining when mapping I/O port space (Bjorn Helgaas) Claim bus resources on MIPS PCI_PROBE_ONLY set-ups (Bjorn Helgaas) Remove unicore32 pci=firmware command line parameter handling (Bjorn Helgaas) Support I/O resources when parsing host bridge resources (Jayachandran C) Add helpers to request/release memory and I/O regions (Johannes Thumshirn) Use pci_(request|release)_mem_regions (NVMe, lpfc, GenWQE, ethernet/intel, alx) (Johannes Thumshirn) Extend pci=resource_alignment to specify device/vendor IDs (Koehrer Mathias (ETAS/ESW5)) Add generic pci_bus_claim_resources() (Lorenzo Pieralisi) Claim bus resources on ARM32 PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi) Remove ARM32 and ARM64 arch-specific pcibios_enable_device() (Lorenzo Pieralisi) Add pci_unmap_iospace() to unmap I/O resources (Sinan Kaya) Remove powerpc __pci_mmap_set_pgprot() (Yinghai Lu) PCI device hotplug Allow additional bus numbers for hotplug bridges (Keith Busch) Ignore interrupts during D3cold (Lukas Wunner) Power management Enforce type casting for pci_power_t (Andy Shevchenko) Don't clear d3cold_allowed for PCIe ports (Mika Westerberg) Put PCIe ports into D3 during suspend (Mika Westerberg) Power on bridges before scanning new devices (Mika Westerberg) Runtime resume bridge before rescan (Mika Westerberg) Add runtime PM support for PCIe ports (Mika Westerberg) Remove redundant check of pcie_set_clkpm (Shawn Lin) Virtualization Add function 1 DMA alias quirk for Marvell 88SE9182 (Aaron Sierra) Add DMA alias quirk for Adaptec 3805 (Alex Williamson) Mark Atheros AR9485 and QCA9882 to avoid bus reset (Chris Blake) Add ACS quirk for Solarflare SFC9220 (Edward Cree) MSI Fix PCI_MSI dependencies (Arnd Bergmann) Add pci_msix_desc_addr() helper (Christoph Hellwig) Switch msix_program_entries() to use pci_msix_desc_addr() (Christoph Hellwig) Make the "entries" argument to pci_enable_msix() optional (Christoph Hellwig) Provide sensible IRQ vector alloc/free routines (Christoph Hellwig) Spread interrupt vectors in pci_alloc_irq_vectors() (Christoph Hellwig) Error Handling Bind DPC to Root Ports as well as Downstream Ports (Keith Busch) Remove DPC tristate module option (Keith Busch) Convert Downstream Port Containment driver to use devm_* functions (Mika Westerberg) Generic host bridge driver Select IRQ_DOMAIN (Arnd Bergmann) Claim bus resources on PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi) ACPI host bridge driver Add ARM64 acpi_pci_bus_find_domain_nr() (Tomasz Nowicki) Add ARM64 ACPI support for legacy IRQs parsing and consolidation with DT code (Tomasz Nowicki) Implement ARM64 AML accessors for PCI_Config region (Tomasz Nowicki) Support ARM64 ACPI-based PCI host controller (Tomasz Nowicki) Altera host bridge driver Check link status before retrain link (Ley Foon Tan) Poll for link up status after retraining the link (Ley Foon Tan) Axis ARTPEC-6 host bridge driver Add PCI_MSI_IRQ_DOMAIN dependency (Arnd Bergmann) Add DT binding for Axis ARTPEC-6 PCIe controller (Niklas Cassel) Add Axis ARTPEC-6 PCIe controller driver (Niklas Cassel) Intel VMD host bridge driver Use lock save/restore in interrupt enable path (Jon Derrick) Select device dma ops to override (Keith Busch) Initialize list item in IRQ disable (Keith Busch) Use x86_vector_domain as parent domain (Keith Busch) Separate MSI and MSI-X vector sharing (Keith Busch) Marvell Aardvark host bridge driver Add DT binding for the Aardvark PCIe controller (Thomas Petazzoni) Add Aardvark PCI host controller driver (Thomas Petazzoni) Add Aardvark PCIe support for Armada 3700 (Thomas Petazzoni) Microsoft Hyper-V host bridge driver Fix interrupt cleanup path (Cathy Avery) Don't leak buffer in hv_pci_onchannelcallback() (Vitaly Kuznetsov) Handle all pending messages in hv_pci_onchannelcallback() (Vitaly Kuznetsov) NVIDIA Tegra host bridge driver Program PADS_REFCLK_CFG* always, not just on legacy SoCs (Stephen Warren) Program PADS_REFCLK_CFG* registers with per-SoC values (Stephen Warren) Use lower-case hex consistently for register definitions (Thierry Reding) Use generic pci_remap_iospace() rather than ARM32-specific one (Thierry Reding) Stop setting pcibios_min_mem (Thierry Reding) Renesas R-Car host bridge driver Drop gen2 dummy I/O port region (Bjorn Helgaas) TI DRA7xx host bridge driver Fix return value in case of error (Christophe JAILLET) Xilinx AXI host bridge driver Fix return value in case of error (Christophe JAILLET) Miscellaneous Make bus_attr_resource_alignment static (Ben Dooks) Include <asm/dma.h> for isa_dma_bridge_buggy (Ben Dooks) MAINTAINERS: Add file patterns for PCI device tree bindings (Geert Uytterhoeven) Make host bridge drivers explicitly non-modular (Paul Gortmaker) -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJXoNRtAAoJEFmIoMA60/r8LMkP/3kiNh21QFS6RZGOaDft5/Py n14Zo0w51avspxoI3iyDlBd5q/SssMqi+2c6Ko/fh2D2xMxJgmQOjdMDrIGARxGA qEHk/5IoXquY2/GcptmCk3ap66cJ6kTovS4OPrb73m3fPuknFwFwdzExq22XHbnI crPya6xwQxPLc54VpY/TsgW8E+EKZd/3FW9wuzzNHXrXmTILyhBQzQAA0K470GMx wEXU6kc3M/XhRuF1zjV9/O+H/xguwfnbTpZLvd2NAF6uXKZoRytEHHtNnVqu1hoe UPpDS2xq32pMNbGxGqBetCdIbkY/hWOufmckHI7Yu2OfXBYyHBYMG2je1+nMPkOV WiFhhrchGt5KnEMUwXPS4ROqnSZVpZBl1Fd4s10GhUYkoE2HNKJXta398H9FR1jj 4NEVSi4mSX/+CkaoIN3lXYiaf9P0wv4Wppve4Scr30+VnLjJhm7Vw5La7v12oo6x otrJ/g98AkmnbuUdLeWBUS/+TOcdPjZYbw52rqBsbOOjFm51Zcj6D7kf5WcTypQy HzbvygSVabcioWehUG1uudC8pdJmQlUGx1aES/iu+mZEae4cuUFALu6hDBD9IYnZ 5JdwjVzI0UItEwT3rQt3t4xiAqHADQ0NAVNJVCeREdoy/YQpSoTWGXIpyqCZ1yCm aBykjRsxbKQXlhVeIxuc =NVxu -----END PGP SIGNATURE----- Merge tag 'pci-v4.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Highlights: - ARM64 support for ACPI host bridges - new drivers for Axis ARTPEC-6 and Marvell Aardvark - new pci_alloc_irq_vectors() interface for MSI-X, MSI, legacy INTx - pci_resource_to_user() cleanup (more to come) Detailed summary: Enumeration: - Move ecam.h to linux/include/pci-ecam.h (Jayachandran C) - Add parent device field to ECAM struct pci_config_window (Jayachandran C) - Add generic MCFG table handling (Tomasz Nowicki) - Refactor pci_bus_assign_domain_nr() for CONFIG_PCI_DOMAINS_GENERIC (Tomasz Nowicki) - Factor DT-specific pci_bus_find_domain_nr() code out (Tomasz Nowicki) Resource management: - Add devm_request_pci_bus_resources() (Bjorn Helgaas) - Unify pci_resource_to_user() declarations (Bjorn Helgaas) - Implement pci_resource_to_user() with pcibios_resource_to_bus() (microblaze, powerpc, sparc) (Bjorn Helgaas) - Request host bridge window resources (designware, iproc, rcar, xgene, xilinx, xilinx-nwl) (Bjorn Helgaas) - Make PCI I/O space optional on ARM32 (Bjorn Helgaas) - Ignore write combining when mapping I/O port space (Bjorn Helgaas) - Claim bus resources on MIPS PCI_PROBE_ONLY set-ups (Bjorn Helgaas) - Remove unicore32 pci=firmware command line parameter handling (Bjorn Helgaas) - Support I/O resources when parsing host bridge resources (Jayachandran C) - Add helpers to request/release memory and I/O regions (Johannes Thumshirn) - Use pci_(request|release)_mem_regions (NVMe, lpfc, GenWQE, ethernet/intel, alx) (Johannes Thumshirn) - Extend pci=resource_alignment to specify device/vendor IDs (Koehrer Mathias (ETAS/ESW5)) - Add generic pci_bus_claim_resources() (Lorenzo Pieralisi) - Claim bus resources on ARM32 PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi) - Remove ARM32 and ARM64 arch-specific pcibios_enable_device() (Lorenzo Pieralisi) - Add pci_unmap_iospace() to unmap I/O resources (Sinan Kaya) - Remove powerpc __pci_mmap_set_pgprot() (Yinghai Lu) PCI device hotplug: - Allow additional bus numbers for hotplug bridges (Keith Busch) - Ignore interrupts during D3cold (Lukas Wunner) Power management: - Enforce type casting for pci_power_t (Andy Shevchenko) - Don't clear d3cold_allowed for PCIe ports (Mika Westerberg) - Put PCIe ports into D3 during suspend (Mika Westerberg) - Power on bridges before scanning new devices (Mika Westerberg) - Runtime resume bridge before rescan (Mika Westerberg) - Add runtime PM support for PCIe ports (Mika Westerberg) - Remove redundant check of pcie_set_clkpm (Shawn Lin) Virtualization: - Add function 1 DMA alias quirk for Marvell 88SE9182 (Aaron Sierra) - Add DMA alias quirk for Adaptec 3805 (Alex Williamson) - Mark Atheros AR9485 and QCA9882 to avoid bus reset (Chris Blake) - Add ACS quirk for Solarflare SFC9220 (Edward Cree) MSI: - Fix PCI_MSI dependencies (Arnd Bergmann) - Add pci_msix_desc_addr() helper (Christoph Hellwig) - Switch msix_program_entries() to use pci_msix_desc_addr() (Christoph Hellwig) - Make the "entries" argument to pci_enable_msix() optional (Christoph Hellwig) - Provide sensible IRQ vector alloc/free routines (Christoph Hellwig) - Spread interrupt vectors in pci_alloc_irq_vectors() (Christoph Hellwig) Error Handling: - Bind DPC to Root Ports as well as Downstream Ports (Keith Busch) - Remove DPC tristate module option (Keith Busch) - Convert Downstream Port Containment driver to use devm_* functions (Mika Westerberg) Generic host bridge driver: - Select IRQ_DOMAIN (Arnd Bergmann) - Claim bus resources on PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi) ACPI host bridge driver: - Add ARM64 acpi_pci_bus_find_domain_nr() (Tomasz Nowicki) - Add ARM64 ACPI support for legacy IRQs parsing and consolidation with DT code (Tomasz Nowicki) - Implement ARM64 AML accessors for PCI_Config region (Tomasz Nowicki) - Support ARM64 ACPI-based PCI host controller (Tomasz Nowicki) Altera host bridge driver: - Check link status before retrain link (Ley Foon Tan) - Poll for link up status after retraining the link (Ley Foon Tan) Axis ARTPEC-6 host bridge driver: - Add PCI_MSI_IRQ_DOMAIN dependency (Arnd Bergmann) - Add DT binding for Axis ARTPEC-6 PCIe controller (Niklas Cassel) - Add Axis ARTPEC-6 PCIe controller driver (Niklas Cassel) Intel VMD host bridge driver: - Use lock save/restore in interrupt enable path (Jon Derrick) - Select device dma ops to override (Keith Busch) - Initialize list item in IRQ disable (Keith Busch) - Use x86_vector_domain as parent domain (Keith Busch) - Separate MSI and MSI-X vector sharing (Keith Busch) Marvell Aardvark host bridge driver: - Add DT binding for the Aardvark PCIe controller (Thomas Petazzoni) - Add Aardvark PCI host controller driver (Thomas Petazzoni) - Add Aardvark PCIe support for Armada 3700 (Thomas Petazzoni) Microsoft Hyper-V host bridge driver: - Fix interrupt cleanup path (Cathy Avery) - Don't leak buffer in hv_pci_onchannelcallback() (Vitaly Kuznetsov) - Handle all pending messages in hv_pci_onchannelcallback() (Vitaly Kuznetsov) NVIDIA Tegra host bridge driver: - Program PADS_REFCLK_CFG* always, not just on legacy SoCs (Stephen Warren) - Program PADS_REFCLK_CFG* registers with per-SoC values (Stephen Warren) - Use lower-case hex consistently for register definitions (Thierry Reding) - Use generic pci_remap_iospace() rather than ARM32-specific one (Thierry Reding) - Stop setting pcibios_min_mem (Thierry Reding) Renesas R-Car host bridge driver: - Drop gen2 dummy I/O port region (Bjorn Helgaas) TI DRA7xx host bridge driver: - Fix return value in case of error (Christophe JAILLET) Xilinx AXI host bridge driver: - Fix return value in case of error (Christophe JAILLET) Miscellaneous: - Make bus_attr_resource_alignment static (Ben Dooks) - Include <asm/dma.h> for isa_dma_bridge_buggy (Ben Dooks) - MAINTAINERS: Add file patterns for PCI device tree bindings (Geert Uytterhoeven) - Make host bridge drivers explicitly non-modular (Paul Gortmaker)" * tag 'pci-v4.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (125 commits) PCI: xgene: Make explicitly non-modular PCI: thunder-pem: Make explicitly non-modular PCI: thunder-ecam: Make explicitly non-modular PCI: tegra: Make explicitly non-modular PCI: rcar-gen2: Make explicitly non-modular PCI: rcar: Make explicitly non-modular PCI: mvebu: Make explicitly non-modular PCI: layerscape: Make explicitly non-modular PCI: keystone: Make explicitly non-modular PCI: hisi: Make explicitly non-modular PCI: generic: Make explicitly non-modular PCI: designware-plat: Make it explicitly non-modular PCI: artpec6: Make explicitly non-modular PCI: armada8k: Make explicitly non-modular PCI: artpec: Add PCI_MSI_IRQ_DOMAIN dependency PCI: Add ACS quirk for Solarflare SFC9220 arm64: dts: marvell: Add Aardvark PCIe support for Armada 3700 PCI: aardvark: Add Aardvark PCI host controller driver dt-bindings: add DT binding for the Aardvark PCIe controller PCI: tegra: Program PADS_REFCLK_CFG* registers with per-SoC values ... |
|
Linus Torvalds | affe8a2abd |
MTD updates for v4.8:
NAND: Updates from Boris: """ This pull request contains only one notable change: * Addition of the MTK NAND controller driver And a bunch of specific NAND driver improvements/fixes. Here are the changes that are worth mentioning: * A few fixes/improvements for the xway NAND controller driver * A few fixes for the sunxi NAND controller driver * Support for DMA in the sunxi NAND driver * Support for the sunxi NAND controller IP embedded in A23/A33 SoCs * Addition for bitflips detection in erased pages to the brcmnand driver * Support for new brcmnand IPs * Update of the OMAP-GPMC binding to support DMA channel description """ In addition, some small fixes around error handling, etc., as well as one long-standing corner case issue (2.6.20, I think?) with writing 1 byte less than a page. NOR: * Rework some error handling on reads and writes, so we can better handle (for instance) SPI controllers which have limitations on their maximum transfer size * Add new Cadence Quad SPI flash controller driver * Add new Atmel QSPI flash controller driver * Add new Hisilicon SPI flash controller driver * Support a few new flash, and update supported features on others * Fix the logic used for detecting a fully-unlocked flash And other miscellaneous small fixes. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJXn/j0AAoJEFySrpd9RFgto58P/j1huB0d21zFen3teo8YKKr1 dLi65mFbqtpU1BLqD07uc2gsH17kvezFJCtx8H8Jp/yCjLF2kYIKL7wDTf6OJPtn aYGS5dG5jhMIq+6CD2olKqy+IVLfL9GvCf44Z3fpVta5lOn09y7Jm0AkBjmJcH45 SdJi+iUkSKhqRY3O2udyauGyL4JWG7eHUonrG9g8ROrO0GWQkT4Ijm1ZwIBlFDkJ e1N960OqPg5ISOzuTeM14Ok9IUyeb7wiXhqRfOJgzNk6iBcN1YC2ono3C7RH2sN7 wiyCqqUpDDCDBDiFdGOdpc9cjzNysrt02ypWRsZIpQVCm89nPLSutqQEWLuo0qzq /eIzdwbk1AxX96CeQohOezqL+n6+RHP9AIvwzL9GeWjipD1LBvfM1l3CmuSKK5jb bQ4CA/FVz1tO/25q8tuLJfpFzhFE2PC3pphVf8tREL/U6OR/97NgDMuQIuqiQpRc 4nJtu79yacAzEiztZh0bsx+t94QFE+kfs/6d8m+llLEyx2sI8HKZeDvNRwEB0OsD wQ5bjyd54m7+i4H8njrnOTP+K2YrwNjGlbTo7qrRSpFMDr4mD0VQLap03Srvo5xV OYB6uGZhGV2L3k6nG5wywM2z6Hw0QfHxjrpcLyG51xABmni2QF3lOdYSllRtRTXp aYLfPUqgIgSUI2GTDHyW =HQr0 -----END PGP SIGNATURE----- Merge tag 'for-linus-20160801' of git://git.infradead.org/linux-mtd Pull MTD updates from Brian Norris: "NAND: Quoting Boris: 'This pull request contains only one notable change: - Addition of the MTK NAND controller driver And a bunch of specific NAND driver improvements/fixes. Here are the changes that are worth mentioning: - A few fixes/improvements for the xway NAND controller driver - A few fixes for the sunxi NAND controller driver - Support for DMA in the sunxi NAND driver - Support for the sunxi NAND controller IP embedded in A23/A33 SoCs - Addition for bitflips detection in erased pages to the brcmnand driver - Support for new brcmnand IPs - Update of the OMAP-GPMC binding to support DMA channel description' In addition, some small fixes around error handling, etc., as well as one long-standing corner case issue (2.6.20, I think?) with writing 1 byte less than a page. NOR: - rework some error handling on reads and writes, so we can better handle (for instance) SPI controllers which have limitations on their maximum transfer size - add new Cadence Quad SPI flash controller driver - add new Atmel QSPI flash controller driver - add new Hisilicon SPI flash controller driver - support a few new flash, and update supported features on others - fix the logic used for detecting a fully-unlocked flash And other miscellaneous small fixes" * tag 'for-linus-20160801' of git://git.infradead.org/linux-mtd: (60 commits) mtd: spi-nor: don't build Cadence QuadSPI on non-ARM mtd: mtk-nor: remove duplicated include from mtk-quadspi.c mtd: nand: fix bug writing 1 byte less than page size mtd: update description of MTD_BCM47XXSFLASH symbol mtd: spi-nor: Add driver for Cadence Quad SPI Flash Controller mtd: spi-nor: Bindings for Cadence Quad SPI Flash Controller driver mtd: nand: brcmnand: Change BUG_ON in brcmnand_send_cmd mtd: pmcmsp-flash: Allocating too much in init_msp_flash() mtd: maps: sa1100-flash: potential NULL dereference mtd: atmel-quadspi: add driver for Atmel QSPI controller mtd: nand: omap2: fix return value check in omap_nand_probe() Documentation: atmel-quadspi: add binding file for Atmel QSPI driver mtd: spi-nor: add hisilicon spi-nor flash controller driver mtd: spi-nor: support dual, quad, and WP for Gigadevice mtd: spi-nor: Added support for n25q00a. memory: Update dependency of IFC for Layerscape mtd: nand: jz4780: Update MODULE_AUTHOR email address mtd: nand: sunxi: prevent a small memory leak mtd: nand: sunxi: add reset line support mtd: nand: sunxi: update DT bindings ... |
|
Linus Torvalds | 731c7d3a20 |
Merge tag 'drm-for-v4.8' of git://people.freedesktop.org/~airlied/linux
Merge drm updates from Dave Airlie: "This is the main drm pull request for 4.8. I'm down with a cold at the moment so hopefully this isn't in too bad a state, I finished pulling stuff last week mostly (nouveau fixes just went in today), so only this message should be influenced by illness. Apologies to anyone who's major feature I missed :-) Core: Lockless GEM BO freeing Non-blocking atomic work Documentation changes (rst/sphinx) Prep for new fencing changes Simple display helpers Master/auth changes Register/unregister rework Loads of trivial patches/fixes. New stuff: ARM Mali display driver (not the 3D chip) sii902x RGB->HDMI bridge Panel: Support for new panels Improved backlight support Bridge: Convert ADV7511 to bridge driver ADV7533 support TC358767 (DSI/DPI to eDP) encoder chip support i915: BXT support enabled by default GVT-g infrastructure GuC command submission and fixes BXT workarounds SKL/BKL workarounds Demidlayering device registration Thundering herd fixes Missing pci ids Atomic updates amdgpu/radeon: ATPX improvements for better dGPU power control on PX systems New power features for CZ/BR/ST Pipelined BO moves and evictions in TTM GPU scheduler improvements GPU reset improvements Overclocking on dGPUs with amdgpu Polaris powermanagement enabled nouveau: GK20A/GM20B volt and clock improvements. Initial support for GP100/GP104 GPUs, GP104 will not yet support acceleration due to NVIDIA having not released firmware for them as of yet. exynos: Exynos5433 SoC with IOMMU support. vc4: Shader validation for branching imx-drm: Atomic mode setting conversion Reworked DMFC FIFO allocation External bridge support analogix-dp: RK3399 eDP support Lots of fixes. rockchip: Lots of small fixes. msm: DT bindings cleanups Shrinker and madvise support ASoC HDMI codec support tegra: Host1x driver cleanups SOR reworking for DP support Runtime PM support omapdrm: PLL enhancements Header refactoring Gamma table support arcgpu: Simulator support virtio-gpu: Atomic modesetting fixes. rcar-du: Misc fixes. mediatek: MT8173 HDMI support sti: ASOC HDMI codec support Minor fixes fsl-dcu: Suspend/resume support Bridge support amdkfd: Minor fixes. etnaviv: Enable GPU clock gating hisilicon: Vblank and other fixes" * tag 'drm-for-v4.8' of git://people.freedesktop.org/~airlied/linux: (1575 commits) drm/nouveau/gr/nv3x: fix instobj write offsets in gr setup drm/nouveau/acpi: fix lockup with PCIe runtime PM drm/nouveau/acpi: check for function 0x1B before using it drm/nouveau/acpi: return supported DSM functions drm/nouveau/acpi: ensure matching ACPI handle and supported functions drm/nouveau/fbcon: fix font width not divisible by 8 drm/amd/powerplay: remove enable_clock_power_gatings_tasks from initialize and resume events drm/amd/powerplay: move clockgating to after ungating power in pp for uvd/vce drm/amdgpu: add query device id and revision id into system info entry at CGS drm/amdgpu: add new definition in bif header drm/amd/powerplay: rename smum header guards drm/amdgpu: enable UVD context buffer for older HW drm/amdgpu: fix default UVD context size drm/amdgpu: fix incorrect type of info_id drm/amdgpu: make amdgpu_cgs_call_acpi_method as static drm/amdgpu: comment out unused defaults_staturn_pro static const structure to fix the build drm/amdgpu: enable UVD VM only on polaris drm/amdgpu: increase timeout of IB test drm/amdgpu: add destroy session when generate VCE destroy msg. drm/amd: fix deadlock of job_list_lock V2 ... |
|
Linus Torvalds | ed780686de |
ARM: 64-bit DT updates for v4.8
Just as the 32-bit contents, the 64-bit device tree branch also contains a number of additions this release cycle. New platforms: - LG LG1313 - Mediatek MT6755 - Renesas r8a7796 - Broadcom 2837 Other platforms with larger updates are: - Nvidia X1 platforms (USB 3.0, regulators, display subsystem) - Mediatek MT8173 (display subsystem added) - Rockchip RK3399 (a lot of new peripherals) - ARM Juno reference implementation (SCPI power domains, coresight, thermal) -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJXnnlFAAoJEIwa5zzehBx3vvQQAJRlQ8JtQYzPyyiBGn/F8rbr JFf2clMobYwPBQGFHQOC2WGEAZEhTMcc0exzfLp4Iu+9wsZW28KQCZvZHk3Gn60/ U/e9/V3xFlCFudgOPoxrUzil1XWG6hxI6PMetn2+WwBa3PziZQczXiJu1iWWP1HE XSusuE9SL7w0EfBDtJcbdZPQC2Ciq3mzBB7wLEE0Dblz4WgZuE74wWMVpjtb9bhV sWtveX45J/UwzUkeIrErwhSzDRCD4D/Vw6p/1gcmCQfY+LFsLs6/QUJbglThyhSJ xo72jc6W2Y+FvX4XgFgjofS57mgfdwgmCSY0OhA7FRCWxbRllkzQrgE5JmPAP0J8 SwfhNe7uH0onuSmiaaTPdcVy6lx572keN6LWjxdW08/qSsDY+TxdxG/zVP3C0lcZ Al5NgwP9oViUpSOLkzwmlZvva+8WBLzDLQjMfduX/JsTUubJSVht+34XS2o7uE9D 15HkqdHX7tQ6GOcOoERr2bKVGkG2MKxMgFcwmILPOARcqKAbxJ/Sq97axJ3Hqdzg GLcPV3YKgQ005vhJfswUN1jjKQbjvOY+aAhCekfs/xMyJz+K9IzkRPxKuVDt/1Tg J6X5yqk12yRiCvfpHUeFs3LTHLsocX3dM8wevkEacNdEZ7hXyhBzkAgZKjt7ujJ/ NQtezrdMW/ZRNq7CoS4z =g0hR -----END PGP SIGNATURE----- Merge tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull 64-bit ARM DT updates from Olof Johansson: "Just as the 32-bit contents, the 64-bit device tree branch also contains a number of additions this release cycle. New platforms: - LG LG1313 - Mediatek MT6755 - Renesas r8a7796 - Broadcom 2837 Other platforms with larger updates are: - Nvidia X1 platforms (USB 3.0, regulators, display subsystem) - Mediatek MT8173 (display subsystem added) - Rockchip RK3399 (a lot of new peripherals) - ARM Juno reference implementation (SCPI power domains, coresight, thermal)" * tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (118 commits) arm64: tegra: Enable HDMI on Jetson TX1 arm64: tegra: Add sor1_src clock arm64: tegra: Add XUSB powergates on Tegra210 arm64: tegra: Add DPAUX pinctrl bindings arm64: tegra: Add ACONNECT bus node for Tegra210 arm64: tegra: Add audio powergate node for Tegra210 arm64: tegra: Add regulators for Tegra210 Smaug arm64: tegra: Correct Tegra210 XUSB mailbox interrupt arm64: tegra: Enable XUSB controller on Jetson TX1 arm64: tegra: Enable debug serial on Jetson TX1 arm64: tegra: Add Tegra210 XUSB controller arm64: tegra: Add Tegra210 XUSB pad controller arm64: tegra: Add DSI panel on Jetson TX1 arm64: tegra: p2597: Add SDMMC power supplies arm64: tegra: Add PMIC support on Jetson TX1 Revert "ARM64: DTS: meson-gxbb: switch ethernet to real clock" arm64: dts: hi6220: Add pl031 RTC support arm64: dts: r8a7796/salvator-x: Enable watchdog timer arm64: dts: r8a7796: Add RWDT node arm64: dts: r8a7796: Use SYSC "always-on" PM Domain ... |
|
Linus Torvalds | 043248cd4e |
ARM: DT updates for v4.8
Device tree contents continue to be the largest branches we submit. This time around, some of the contents worth pointing out is: - New SoC platforms: - Freescale i.MX 7Solo - Broadcom BCM23550 - Cirrus Logic EP7209 and EP7211 (clps711x platforms)_ - Hisilicon HI3519 - Renesas R8A7792 Some of the other delta that is sticking out, line-count wise: - Exynos moves of IP blocks under an SoC bus, which causes a large delta due to indentation changes - A new Tegra K1 board: Apalis - A bunch of small updates to many Allwinner platforms; new hardware support, some cleanup, etc. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJXnnckAAoJEIwa5zzehBx3Ss0P/1hp+n8DMuNCHReof8u2D3xf pi9t5vNzfODMq/YrDT3bzQ3txoEZISt+ztEFku26BUywCZbeIEx+XLPewVEj0ODc tpWKmW2xNZDIwn2eHRrBD5Y8gJugAnwgwBh9SqfcM8Wtdt2qc7edBvcxLhsiCTuV pKPxPoJkan/BMR3vBMfoLIx/+aDcZJgpzUkRRuyLod17JdQ0tnMECu5UPrk6Yun8 IjDcJTcwZlpZ9gvtBhxyGUENOPtmGH2ZvZuBPisr7Mwih4mDNJJ/9YrnsdfdYWaf WAysPGXYMfQy9jMiAC1cBm+jeIPvbIeZpYRzPt3vlFKAHpAZG1sp+r7SLfrT9e7x 7La/QPNVLMsKTjGMW82/qRzOXBed3htk9v2YPIHQubFIOOz2mXqwSPXCqUHuYKeU eqzedvm0FGoeJbYTzpYyRAWU9OQtazOR+WAI8PrZiN4tdaxvYT2F5JJCMztYIoeq SJdPUbWTsYxkc/Kj1FagW0LOydO40Aif53JbfrabnzcRYlWsxqQfaSsP8J8G4QDq zXZvbt0IMan2B52X7AysDF8Zq4Ti8dVijvA7XNl7b5HFBrRpbOt9Tdhl/4zRiW14 Y16VswnIR+9qPhtSXiSkdOwB/0cAI6XEiBTgRunYccakGDUfLOEpIVqJJ1zGNHpl hqJum3pAMW8i5JX8vl8J =C4NU -----END PGP SIGNATURE----- Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM DT updates from Olof Johansson: "Device tree contents continue to be the largest branches we submit. This time around, some of the contents worth pointing out is: New SoC platforms: - Freescale i.MX 7Solo - Broadcom BCM23550 - Cirrus Logic EP7209 and EP7211 (clps711x platforms)_ - Hisilicon HI3519 - Renesas R8A7792 Some of the other delta that is sticking out, line-count wise: - Exynos moves of IP blocks under an SoC bus, which causes a large delta due to indentation changes - a new Tegra K1 board: Apalis - a bunch of small updates to many Allwinner platforms; new hardware support, some cleanup, etc" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (426 commits) ARM: dts: sun8i: Add dts file for inet86dz board ARM: dts: sun8i: Add dts file for Polaroid MID2407PXE03 tablet ARM: dts: sun8i: Use sun8i-reference-design-tablet for ga10h dts ARM: dts: sun8i: Use sun8i-reference-design-tablet for polaroid mid2809pxe04 ARM: dts: sun8i: reference-design-tablet: Add drivevbus-supply ARM: dts: Copy sun8i-q8-common.dtsi sun8i-reference-design-tablet.dtsi ARM: dts: sun5i: Use sun5i-reference-design-tablet.dtsi for utoo p66 dts ARM: dts: sun5i: Use sun5i-reference-design-tablet.dtsi for dit4350 dts ARM: dts: sun5i: reference-design-tablet: Remove mention of q8 ARM: dts: sun5i: reference-design-tablet: Set lradc vref to avcc ARM: dts: sun5i: Rename sun5i-q8-common.dtsi sun5i-reference-design-tablet.dtsi ARM: dts: sun5i: Move q8 display bits to sun5i-a13-q8-tablet.dts ARM: dts: sunxi: Rename sunxi-q8-common.dtsi sunxi-reference-design-tablet.dtsi ARM: dts: at91: Don't build unnecessary dtbs ARM: dts: at91: sama5d3x: separate motherboard gmac and emac definitions ARM: dts: at91: at91sam9g25ek: fix isi endpoint node ARM: dts: at91: move isi definition to at91sam9g25ek ARM: dts: at91: fix i2c-gpio node name ARM: dts: at91: vinco: fix regulator name ARM: dts: at91: ariag25 : fix onewire node ... |
|
Linus Torvalds | 43a0a98aa8 |
ARM: SoC driver updates for v4.8
Driver updates for ARM SoCs. A slew of changes this release cycle. The reset driver tree, that we merge through arm-soc for historical reasons, is also sizable this time around. Among the changes: - clps711x: Treewide changes to compatible strings, merged here for simplicity. - Qualcomm: SCM firmware driver cleanups, move to platform driver - ux500: Major cleanups, removal of old mach-specific infrastructure. - Atmel external bus memory driver - Move of brcmstb platform to the rest of bcm - PMC driver updates for tegra, various fixes and improvements - Samsung platform driver updates to support 64-bit Exynos platforms - Reset controller cleanups moving to devm_reset_controller_register() APIs - Reset controller driver for Amlogic Meson - Reset controller driver for Hisilicon hi6220 - ARM SCPI power domain support -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJXnm1XAAoJEIwa5zzehBx35lcP/ApuQarIXeZCQZtjlUBV9McW o3o7FhKFHePmEPeoYCvVeK5D8NykTkQv3WpnCknoxPJzxGJF7jbPWQJcVnXfKOXD kTcyIK15WL2HHtSE3lYyLfyUPz8AbJyRt0l0cxgcg6jvo+uzlWooNz1y78rLIYzg UwRssj7OiHv4dsyYRHZIsjnB8gMWw8rYMk154gP2xy6MnNXXzzOVVnOiVqxSZBm+ EgIIcROMOqkkHuFlClMYKluIgrmgz1Ypjf+FuAg7dqXZd+TGRrmGXeI7SkGThfLu nyvY3N18NViNu7xOUkI9zg7+ifyYM8Si9ylalSICSJdIAxZfiwFqFaLJvVWKU1rY rBOBjKckQI0/X9WYusFNFHcijhIFV8/FgGAnVRRMPdvlCss7Zp03C9mR4AEhmKMX rLG49x81hU1C+LftC59ml3iB8dhZrrRkbxNHjLFHVGWNrKMrmJKa8JhXGRAoNM+u LRauiuJZatqvLfISNvpfcoW2EashVoU3f+uC8ymT3QCyME3wZm0t7T4tllxhMfBl sOgJqNkTKDmPLofwm/dASiLML7ZF1WePScrFyOACnj9K4mUD+OaCnowtWoQPu0eI aNmT84oosJ2S9F/iUDPtFHXdzQ+1QPPfSiQ9FXMoauciVq/2F+pqq68yYgqoxFOG vmkmG2YM4Wyq43u0BONR =O8+y -----END PGP SIGNATURE----- Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "Driver updates for ARM SoCs. A slew of changes this release cycle. The reset driver tree, that we merge through arm-soc for historical reasons, is also sizable this time around. Among the changes: - clps711x: Treewide changes to compatible strings, merged here for simplicity. - Qualcomm: SCM firmware driver cleanups, move to platform driver - ux500: Major cleanups, removal of old mach-specific infrastructure. - Atmel external bus memory driver - Move of brcmstb platform to the rest of bcm - PMC driver updates for tegra, various fixes and improvements - Samsung platform driver updates to support 64-bit Exynos platforms - Reset controller cleanups moving to devm_reset_controller_register() APIs - Reset controller driver for Amlogic Meson - Reset controller driver for Hisilicon hi6220 - ARM SCPI power domain support" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (100 commits) ARM: ux500: consolidate base platform files ARM: ux500: move soc_id driver to drivers/soc ARM: ux500: call ux500_setup_id later ARM: ux500: consolidate soc_device code in id.c ARM: ux500: remove cpu_is_u* helpers ARM: ux500: use CLK_OF_DECLARE() ARM: ux500: move l2x0 init to .init_irq mfd: db8500 stop passing around platform data ASoC: ab8500-codec: remove platform data based probe ARM: ux500: move ab8500_regulator_plat_data into driver ARM: ux500: remove unused regulator data soc: raspberrypi-power: add CONFIG_OF dependency firmware: scpi: add CONFIG_OF dependency video: clps711x-fb: Changing the compatibility string to match with the smallest supported chip input: clps711x-keypad: Changing the compatibility string to match with the smallest supported chip pwm: clps711x: Changing the compatibility string to match with the smallest supported chip serial: clps711x: Changing the compatibility string to match with the smallest supported chip irqchip: clps711x: Changing the compatibility string to match with the smallest supported chip clocksource: clps711x: Changing the compatibility string to match with the smallest supported chip clk: clps711x: Changing the compatibility string to match with the smallest supported chip ... |
|
Linus Torvalds | fbae5cbb43 |
ARM: SoC platform updates for v4.8
Improved and new platform support for various SoCs: - New SoC support: - Broadcom BCM23550 - Freescale i.MX7Solo - Qualcomm MDM9615 - Renesas r8a7792 - Conversion of clps711x to multiplatform - debug uart improvements for Atmel platforms - Tango platform improvements: HOTPLUG_CPU, Suspend-to-ram - OMAP tweaks and improvements to hwmod - OMAP support for kexec on SMP -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJXnaibAAoJEIwa5zzehBx3h6AP/0TBATiDuYXTcX3V8zZ/ia9y 7dWbP7gVX7DN39b5qdjLTa+DUx3Y3msxW9qsuUQR8RWijbqjCH7b/fyPwGA0fmpP 3uZpFpyzs+6/3TiMDN1yw1T+/2YbVyM+4rOeNsCwncdXjGSx0FaMJAqLBrppiWLH 1S9HhD/314znibl8skOy8QIDWwlW011sS2mNUIN+JelvnS/VDjtCDfpphpNrAQF9 MZB6LhT9itvf6mIEGIsaDq/Ii7fgIAnA9WCtwv9tJkAZHzbS0cWkiJzb7hF1GzFO Q5HBAyzn+CkeTQ3+9NQU0G0vhfa3Ea0g1gfw6qRmAw+z8Qdiamjh8SSve6zm1fE8 GmIewsMAWWIUYykEIi9hbWCTYq06Pw/Nn6KWRAuQ/lpt++jzMQ82qk6cxELLW15e uAC1JjFOCIFNBZhkrdQDU0qx6Ew/AUH4wCYqu4Xh7pW0MHu0V9NgsmooeoTmCkpd WtgKp8Wh5dsK3SdsbTjdR/IeHSQkeSdgNY/6TBTjpRwCIlEMwHlKbvwvRExk1xzi nLQJsR49MsjeSdPflzO6WUzOjJhQfuw2jCtAQjlom15EgkEZ569MT4RsAQIgvNCI PeUWkvIW1uCtW7Y6ADPRBKMIrajPs8YW4E/xTItuhrqLHp8z6efvRmVNdpzqBTVj tT2t2bRXF0cGiUvOeU7U =Kh9P -----END PGP SIGNATURE----- Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Olof Johansson: "Improved and new platform support for various SoCs: New SoC support: - Broadcom BCM23550 - Freescale i.MX7Solo - Qualcomm MDM9615 - Renesas r8a7792 Improvements: - convert clps711x to multiplatform - debug uart improvements for Atmel platforms - Tango platform improvements: HOTPLUG_CPU, Suspend-to-ram - OMAP tweaks and improvements to hwmod - OMAP support for kexec on SMP" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (109 commits) ARM: davinci: fix build break because of undeclared dm365_evm_snd_data ARM: s3c64xx: smartq: Avoid sparse warnings ARM: sti: Implement dummy L2 cache's write_sec ARM: STi: Update machine _namestr to be more generic. arm: meson: explicitly select clk drivers ARM: tango: add Suspend-to-RAM support ARM: hisi: consolidate the hisilicon machine entries ARM: tango: fix CONFIG_HOTPLUG_CPU=n build MAINTAINERS: Update BCM281XX/BCM11XXX/BCM216XX entry MAINTAINERS: Update BCM63XX entry MAINTAINERS: Add NS2 entry MAINTAINERS: Fix nsp false-positives MAINTAINERS: Change L to M for Broadcom ARM/ARM64 SoC entries ARM: debug: Enable DEBUG_BCM_5301X for Northstar Plus SoCs ARM: clps711x: Switch to MULTIPLATFORM ARM: clps711x: Remove boards support ARM: clps711x: Add basic DT support ARM: clps711x: Reduce static map size ARM: SAMSUNG: Constify iomem address passed to s5p_init_cpu ARM: oxnas: Change OX810SE default driver config ... |
|
Bjorn Helgaas | 9454c23852 |
Merge branch 'pci/msi-affinity' into next
Conflicts: drivers/nvme/host/pci.c |
|
Bjorn Helgaas | a04bee8285 |
Merge branches 'pci/host-aardvark', 'pci/host-altera', 'pci/host-dra7xx', 'pci/host-hv', 'pci/host-vmd' and 'pci/host-xilinx' into next
* pci/host-aardvark: arm64: dts: marvell: Add Aardvark PCIe support for Armada 3700 PCI: aardvark: Add Aardvark PCI host controller driver dt-bindings: add DT binding for the Aardvark PCIe controller * pci/host-altera: PCI: altera: Poll for link up status after retraining the link PCI: altera: Check link status before retrain link PCI: altera: Reorder read/write functions * pci/host-dra7xx: PCI: dra7xx: Fix return value in case of error * pci/host-hv: PCI: hv: Fix interrupt cleanup path PCI: hv: Handle all pending messages in hv_pci_onchannelcallback() PCI: hv: Don't leak buffer in hv_pci_onchannelcallback() * pci/host-vmd: x86/PCI: VMD: Separate MSI and MSI-X vector sharing x86/PCI: VMD: Use x86_vector_domain as parent domain x86/PCI: VMD: Use lock save/restore in interrupt enable path x86/PCI: VMD: Initialize list item in IRQ disable x86/PCI: VMD: Select device dma ops to override * pci/host-xilinx: PCI: xilinx: Fix return value in case of error Manually apply changes from pci/demodularize-hosts and pci/host-request-windows to drivers/pci/host/pci-aardvark.c |
|
Linus Torvalds | 7a66ecfd31 |
- New Functionality
- Add support for an enable regulator to lp855x_bl -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAABCAAGBQJXnxc3AAoJEFGvii+H/HdhWqMP+wV7w4p8lfO7sjA3Bbb4IQCv A0Rh2Xog1xVr/abFo4WE43oILZ5EiqWd/89vJJkidgtGBknUTxxICS5bh8Eloy8A 0LOWdpjHnbrYKHFrmsdXM9nwOdO4GCaUXO3TaKUuuRsiMqpHQ7h5t/+beTdFCpx9 6eOxeCvcLI3Qt3Fzn//Y6Nhe2TZKg3POc5b8Ces9LbsBkFs4XUwrhkvD1i14UM+E dPHNn7faCf0rxvvyzqtNtorMj6vg2SyxHyC3eSGGZ4gZUeu/bjSWIUrrZLN53/2D Jk0ay1Db5AOIrWyFUZeJT9x0GwX35RwtDHpy+AN/kvafXRCB/eMfkXmzkTmX10FZ Z/oBjyn8Sepqf0OaAINoj3ClXe3MeoVJk5TVHKoAuquVSL2f+E8PocOY98d8Qf6Q K/8+TSH9CyD93Ad1NQ6vqHz75RAsOwM4Ntir8d8ppSn795JlxvHT/isxwxDR8Lp9 sRn8a17MG6RgWv7iPddUib8X4xtjsiv9cLwUBt5u4CNNrWTAeUc4vI81DFWK5H07 DUaL6YofNqAhusSkdYtQfYrkpAywJsOjhFABghVCMnXbr0Gqwq0bV0vNRL5zMxZm kLk49eD2Zu6F3Huyr1v/6jmljVz+WvsAyTUIbvWMoW5SRDMsBoHg1gwAUKG1wKk0 dzQhy/t3Z3RiLi2C7gLa =rUNA -----END PGP SIGNATURE----- Merge tag 'backlight-for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight Pull backlight updates from Lee Jones: "Add support for an enable regulator to lp855x_bl" * tag 'backlight-for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: backlight: lp855x: Add enable regulator |
|
Linus Torvalds | 06e23d5115 |
- Core Frameworks
- New API to call bespoke pre/post IRQ handlers; Regmap - New Device Support - Add support for RN5T567 to rn5t618 - Add support for COMe-cSL6 and COMe-mAL10 to kempld-core - New Functionality - Add support for USB Power Supply to axp20x - Add support for Power Key to hi655x-pmic - Fix-ups - Update MAINTAINERS; Dialog, Altera - Remove module support; max77843, max77620, max8998, max8997, max8925-i2c - Add module support; max14577 - Constifying; max77620 - Allow bespoke IRQ masking/unmasking; max77620 - Remove superfluous code; arizona, qcom_rpm, smsc-ece1099 - Power Management fixups; arizona-core - Error-path improvement; twl-core, dm355evm_msp, smsc-ece1099, hi655x - Clocking fixups; twl6040 - Trivial (spelling, headers, coding-style, whitespace, (re)naming); si476x-i2c, omap-usb-tll, ti_am335x_tscadc, tps6507, hi655x-pmic - Bug Fixes - Fix offset error for MSM8660; qcom_rpm - Fix possible spurious IRQs; arizona, hi655x-pmic -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAABCAAGBQJXnxUiAAoJEFGvii+H/HdhjY4P/i9EeGo4rSKyMNYvSIV+FwpB W63eOeEf08EzLfaTyDTnJ9FO53UvcJEXvVE7jO5oYWI8g5y5zBinbwk041uUIeuN 5gv/3quW0kiOozd+6VBghaLYbj37ZZLqBFXc0sYpHNwcIrfVboTaiUrFkl9wUXKQ Gbi7mAw0JhgzigQX2oPmylsdJ2u+MuwxLOcL43HoYLQ6E9b5ZmMqHqz0X7zwjh2c og+WYSl2VOe001fRoLZIPPkE6r61IWZ85oojuZKeQnIiadZWXGwY3XMcYDcheVuz 6BC/f5Vt9PacDPjuInfI4Mv8ROmhnvoNgB9xgoUDROAn5m5FgqdHGZPK40hE+uVy cWRQjdI9CiTTcogGepJGY57OlB7T7q+Peue00knjQiiYdtS2jU4E0xNOWPO/8ILD EV8yeYbD9yghhA1vFc5pzOEQnBD9q9zX40N36vJp4cgl6jO25R/PkLeTg5KufFoi 6+H9VAgqevg4/D8R63Yj8ANdEAvTVupLcpzwORgz89jKF4x5fDU782L5nGifx6dt hNlan00bLrSL6sWtAqCvezSNlF2Aqb6qHhdnvIV93VGeteVMU6N1wRB3JH08HFQI C5t+qFqlxJn3R5E8ur/6ZhtkiPnC4qCVR+r9uyH6Aix9bR1W18o0jgypuZMu7E+h czIJMLv97drOVtzYsosz =KB2d -----END PGP SIGNATURE----- Merge tag 'mfd-for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Core Framework: - New API to call bespoke pre/post IRQ handlers; Regmap New Device Support: - Add support for RN5T567 to rn5t618 - Add support for COMe-cSL6 and COMe-mAL10 to kempld-core New Functionality: - Add support for USB Power Supply to axp20x - Add support for Power Key to hi655x-pmic Fix-ups: - Update MAINTAINERS; Dialog, Altera - Remove module support; max77843, max77620, max8998, max8997, max8925-i2c - Add module support; max14577 - Constifying; max77620 - Allow bespoke IRQ masking/unmasking; max77620 - Remove superfluous code; arizona, qcom_rpm, smsc-ece1099 - Power Management fixups; arizona-core - Error-path improvement; twl-core, dm355evm_msp, smsc-ece1099, hi655x - Clocking fixups; twl6040 - Trivial (spelling, headers, coding-style, whitespace, (re)naming); si476x-i2c, omap-usb-tll, ti_am335x_tscadc, tps6507, hi655x-pmic Bug Fixes: - Fix offset error for MSM8660; qcom_rpm - Fix possible spurious IRQs; arizona, hi655x-pmic" * tag 'mfd-for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (42 commits) mfd: qcom_rpm: Parametrize also ack selector size mfd: twl6040: Handle mclk used for HPPLL and optional internal clock source mfd: Add support for COMe-cSL6 and COMe-mAL10 to Kontron PLD driver mfd: hi655x: Fix return value check in hi655x_pmic_probe() mfd: smsc-ece1099: Return directly after a function failure in smsc_i2c_probe() mfd: smsc-ece1099: Delete an unnecessary variable initialisation in smsc_i2c_probe() mfd: dm355evm_msp: Return directly after a failed platform_device_alloc() in add_child() mfd: twl-core: Refactoring for add_numbered_child() mfd: twl-core: Return directly after a failed platform_device_alloc() in add_numbered_child() mfd: arizona: Add missing disable of PM runtime on probe error path mfd: stmpe: Move platform data into MFD driver mfd: max14577: Allow driver to be built as a module mfd: max14577: Use module_init() instead of subsys_initcall() mfd: arizona: Remove some duplicate defines mfd: qcom_rpm: Remove unused define mfd: hi655x-pmic: Add powerkey device to hi655x PMIC driver mfd: hi655x-pmic: Rename some interrupt macro names mfd: hi655x-pmic: Fixup issue with un-acked interrupts mfd: arizona: Check if AOD interrupts are pending before dispatching mfd: qcom_rpm: Fix offset error for msm8660 ... |
|
Linus Torvalds | dd9671172a |
IOMMU Updates for Linux v4.8
In the updates: * Big endian support and preparation for defered probing for the Exynos IOMMU driver * Simplifications in iommu-group id handling * Support for Mediatek generation one IOMMU hardware * Conversion of the AMD IOMMU driver to use the generic IOVA allocator. This driver now also benefits from the recent scalability improvements in the IOVA code. * Preparations to use generic DMA mapping code in the Rockchip IOMMU driver * Device tree adaption and conversion to use generic page-table code for the MSM IOMMU driver * An iova_to_phys optimization in the ARM-SMMU driver to greatly improve page-table teardown performance with VFIO * Various other small fixes and conversions -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAABAgAGBQJXl3e+AAoJECvwRC2XARrjMIgP/1Mm9qIfcaAxKY4ByqbVfrH8 313PO6rpwUhhywUmnf/1F/x+JbuLv8MmRXfSc106mdB1rq9NXpkORYKrqVxs0cSq 6u6TzZWbF6WN1ipqXxDITNFBSy7u97K1VuFaKyYFfLbg8xrkcdkMZJ7BqM2xIEdk rnRKcfHo6wsmCXJ6InsUPmKAqU6AfMewZTGjO+v77Gce0rZEbsJ8n7BRKC9vO2bc akvN2W+zzEUSyhbuyYQBG+agpmC5GJvz4u+6QvAP5sxTWfAsnwAoPpP4xxR+/KjT eicHlja4v0YK6Hr4AJaMxoKfKIrCdqpWm0D2tg/edyWZCeg98AW/w7/s0I8OD3ao Otj6IqC8nPk0pYciOeEPQ7aqPbvKAqU2FYWt7lWamrdr98u2R3p2nXGl0KthoAj6 JqzrCZXvBS7sj1IPLlGpj939yvbKbjpE0p7y1qhI1VEBXoBWFNvlKydkYx76BTGK F6paGVqn2Zwy00AqAsylTEkvIK063zwShZ6nPqz4bMdVlgzjrjCzdDecjfbHr8Ic 6D2oCwyF+RJ8qw+Ecm9EmWFik80sgb+iUTeeYEXNf+YzLYt5McIj7fi3N+sUPel3 YJ4S4x0sIpgUZZ1i+rOo8ZPAFHRU6SRPYV+ewaeYKrMt+Un5dTn9SddpqrJdbiUu YrF36BaQjc123IRGKrSd =xiS2 -----END PGP SIGNATURE----- Merge tag 'iommu-updates-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU updates from Joerg Roedel: - big-endian support and preparation for defered probing for the Exynos IOMMU driver - simplifications in iommu-group id handling - support for Mediatek generation one IOMMU hardware - conversion of the AMD IOMMU driver to use the generic IOVA allocator. This driver now also benefits from the recent scalability improvements in the IOVA code. - preparations to use generic DMA mapping code in the Rockchip IOMMU driver - device tree adaption and conversion to use generic page-table code for the MSM IOMMU driver - an iova_to_phys optimization in the ARM-SMMU driver to greatly improve page-table teardown performance with VFIO - various other small fixes and conversions * tag 'iommu-updates-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (59 commits) iommu/amd: Initialize dma-ops domains with 3-level page-table iommu/amd: Update Alias-DTE in update_device_table() iommu/vt-d: Return error code in domain_context_mapping_one() iommu/amd: Use container_of to get dma_ops_domain iommu/amd: Flush iova queue before releasing dma_ops_domain iommu/amd: Handle IOMMU_DOMAIN_DMA in ops->domain_free call-back iommu/amd: Use dev_data->domain in get_domain() iommu/amd: Optimize map_sg and unmap_sg iommu/amd: Introduce dir2prot() helper iommu/amd: Implement timeout to flush unmap queues iommu/amd: Implement flush queue iommu/amd: Allow NULL pointer parameter for domain_flush_complete() iommu/amd: Set up data structures for flush queue iommu/amd: Remove align-parameter from __map_single() iommu/amd: Remove other remains of old address allocator iommu/amd: Make use of the generic IOVA allocator iommu/amd: Remove special mapping code for dma_ops path iommu/amd: Pass gfp-flags to iommu_map_page() iommu/amd: Implement apply_dm_region call-back iommu/amd: Create a list of reserved iova addresses ... |
|
Linus Torvalds | 77d9ada23f |
Merge branch 'mailbox-for-next' of git://git.linaro.org/landing-teams/working/fujitsu/integration
Pull mailbox updates from Jussi Brar: "Broadcom: - New PDC controller driver and bindings Misc: - PL320 - Convert from 'raw' IO to 'relaxed' version - Test - fix dangling pointer" * 'mailbox-for-next' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox: Fix format and type mismatches in Broadcom PDC driver mailbox: Add Broadcom PDC mailbox driver dt-bindings: add bindings documentation for PDC driver. mailbox: pl320: remove __raw IO mailbox: mailbox-test: set tdev->signal to NULL after freeing |
|
Linus Torvalds | 07f00f06ba |
MMC core:
- A couple of changes to improve the support for erase/discard/trim cmds - Add eMMC HS400 enhanced strobe support - Show OCR and DSR registers in SYSFS for MMC/SD cards - Correct and improve busy detection logic for MMC switch (CMD6) cmds - Disable HPI cmds for certain broken Hynix eMMC cards - Allow MMC hosts to specify non-support for SD and MMC cmds - Some minor additional fixes MMC host: - sdhci: Re-works, fixes and clean-ups - sdhci: Add HW auto re-tuning support - sdhci: Re-factor code to prepare for adding support for eMMC CMDQ - sdhci-esdhc-imx: Fixes and clean-ups - sdhci-esdhc-imx: Update system PM support - sdhci-esdhc-imx: Enable HW auto re-tuning - sdhci-bcm2835: Remove driver as sdhci-iproc is used instead - sdhci-brcmstb: Add new driver for Broadcom BRCMSTB SoCs - sdhci-msm: Add support for UHS cards - sdhci-tegra: Improve support for UHS cards - sdhci-of-arasan: Update phy support for Rockchip SoCs - sdhci-of-arasan: Deploy enhanced strobe support - dw_mmc: Some fixes and clean-ups - dw_mmc: Enable support for erase/discard/trim cmds - dw_mmc: Enable CMD23 support - mediatek: Some fixes related to the eMMC HS400 support - sh_mmcif: Improve support for HW busy detection - rtsx_pci: Enable support for erase/discard/trim cmds -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJXnibNAAoJEP4mhCVzWIwpKIQQAM2iTx5ROuOe3/CmWEAv5phg XpgmuWz/R/KQH1wyDor4zEJUE5mUYpvSg9vSCByYnVwHpoNKg4R0t0OJZJSN05Z0 njdKCtkVXlRaQitX3tiFQazkMLaQER0tRrqrHjYZYkBgr8DnSEf00aueSGshrr/p g/JE7Z+eGVJx6d3Lvd24NMVZYSGbVq5lY/JTbURkKR5C9OhEe5GMfUsw1M+aVhUo pvxeGVYuIr4WsP+c+roa6czTO8VMrsd71syLDCweWMk+GOHvaSjpzvdC7iFGAl4B CoN6f3LTpJGpDCBWnqp/yQMvrMsR1SKlrwOUph4XEAXZCaz5WtF8+vhQaK7gwYGO RiyIIh04Bup+gzY6w0Mwgsw0jAkw5ahXl6xknD58q/sPEdlKe0ATyxl0oUwDntc0 957BtmOvChYG13Q5pW6VNef0jKW6LOU+brJKEGxtr8x9OPeCiQOBO/GCUTg3IwA5 ohylmjS+/6G3G4bgGvfXyGvObOsdAh3RQ8g7/1pVb0hQobDhxO5PjtTqVtelfFJk PRdKKIWhROiNMrpVLZnL7+OLkusEQ4s0Lmq08T1dVXvV+hLITwyTyWYmBr6Kb51B 2x3DO7PcfEyytSn3TjPjdp7Wax+19YL+tMmu2QAlXv3iHSKFAH17nLk0bPO6VOWZ FHzKKutm4TwZJ/fyyiqP =wzSC -----END PGP SIGNATURE----- Merge tag 'mmc-v4.8' of git://git.linaro.org/people/ulf.hansson/mmc Pull MMC updates from Ulf Hansson: "MMC core: - A couple of changes to improve the support for erase/discard/trim cmds - Add eMMC HS400 enhanced strobe support - Show OCR and DSR registers in SYSFS for MMC/SD cards - Correct and improve busy detection logic for MMC switch (CMD6) cmds - Disable HPI cmds for certain broken Hynix eMMC cards - Allow MMC hosts to specify non-support for SD and MMC cmds - Some minor additional fixes MMC host: - sdhci: Re-works, fixes and clean-ups - sdhci: Add HW auto re-tuning support - sdhci: Re-factor code to prepare for adding support for eMMC CMDQ - sdhci-esdhc-imx: Fixes and clean-ups - sdhci-esdhc-imx: Update system PM support - sdhci-esdhc-imx: Enable HW auto re-tuning - sdhci-bcm2835: Remove driver as sdhci-iproc is used instead - sdhci-brcmstb: Add new driver for Broadcom BRCMSTB SoCs - sdhci-msm: Add support for UHS cards - sdhci-tegra: Improve support for UHS cards - sdhci-of-arasan: Update phy support for Rockchip SoCs - sdhci-of-arasan: Deploy enhanced strobe support - dw_mmc: Some fixes and clean-ups - dw_mmc: Enable support for erase/discard/trim cmds - dw_mmc: Enable CMD23 support - mediatek: Some fixes related to the eMMC HS400 support - sh_mmcif: Improve support for HW busy detection - rtsx_pci: Enable support for erase/discard/trim cmds" * tag 'mmc-v4.8' of git://git.linaro.org/people/ulf.hansson/mmc: (135 commits) mmc: rtsx_pci: Remove deprecated create_singlethread_workqueue mmc: rtsx_pci: Enable MMC_CAP_ERASE to allow erase/discard/trim requests mmc: rtsx_pci: Use the provided busy timeout from the mmc core mmc: sdhci-pltfm: Drop define for SDHCI_PLTFM_PMOPS mmc: sdhci-pltfm: Convert to use the SET_SYSTEM_SLEEP_PM_OPS mmc: sdhci-pltfm: Make sdhci_pltfm_suspend|resume() static mmc: sdhci-esdhc-imx: Use common sdhci_suspend|resume_host() mmc: sdhci-esdhc-imx: Assign system PM ops within #ifdef CONFIG_PM_SLEEP mmc: sdhci-sirf: Remove non needed #ifdef CONFIG_PM* for dev_pm_ops mmc: sdhci-s3c: Remove non needed #ifdef CONFIG_PM for dev_pm_ops mmc: sdhci-pxav3: Remove non needed #ifdef CONFIG_PM for dev_pm_ops mmc: sdhci-of-esdhc: Simplify code by using SIMPLE_DEV_PM_OPS mmc: sdhci-acpi: Simplify code by using SET_SYSTEM_SLEEP_PM_OPS mmc: sdhci-pci-core: Simplify code by using SET_SYSTEM_SLEEP_PM_OPS mmc: Change the max discard sectors and erase response when HW busy detect phy: rockchip-emmc: Wait even longer for the DLL to lock phy: rockchip-emmc: Be tolerant to card clock of 0 in power on mmc: sdhci-of-arasan: Revert: Always power the PHY off/on when clock changes mmc: sdhci-msm: Add support for UHS cards mmc: sdhci-msm: Add set_uhs_signaling() implementation ... |
|
Linus Torvalds | 27acbec338 |
Merge git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck: "Core: - min and max timeout improvements, WDOG_HW_RUNNING improvements, status funtionality - Add a device managed API for watchdog_register_device() New watchdog drivers: - Aspeed SoCs - Maxim PMIC MAX77620 - Amlogic Meson GXBB SoC Enhancements: - support for the r8a7796 watchdog device - support for F81866 watchdog device - support for 5th variation of Apollo Lake - support for MCP78S chipset - clean-up of softdog.c watchdog device driver - pic32-wdt and pic32-dmt fixes - Documentation/watchdog: watchdog-test improvements - several other fixes and improvements" * git://www.linux-watchdog.org/linux-watchdog: (50 commits) watchdog: gpio_wdt: Fix missing platform_set_drvdata() in gpio_wdt_probe() watchdog: core: Clear WDOG_HW_RUNNING before calling the stop function watchdog: core: Fix error handling of watchdog_dev_init() watchdog: pic32-wdt: Fix return value check in pic32_wdt_drv_probe() watchdog: pic32-dmt: Remove .owner field for driver watchdog: pic32-wdt: Remove .owner field for driver watchdog: renesas-wdt: Add support for the r8a7796 wdt Documentation/watchdog: check return value for magic close watchdog: sbsa: Drop status function watchdog: Implement status function in watchdog core watchdog: tangox: Set max_hw_heartbeat_ms instead of max_timeout watchdog: change watchdog_need_worker logic watchdog: add support for MCP78S chipset in nv_tco watchdog: bcm2835_wdt: remove redundant ->set_timeout callback watchdog: bcm2835_wdt: constify _ops and _info structures dt-bindings: watchdog: Add Meson GXBB Watchdog bindings watchdog: Add Meson GXBB Watchdog Driver watchdog: qcom: configure BARK time in addition to BITE time watchdog: qcom: add option for standalone watchdog not in timer block watchdog: qcom: update device tree bindings ... |
|
Linus Torvalds | c9b95e5961 |
sound updates for 4.8
Majority of this update is about ASoC, including a few new drivers, and the rest are mostly minor changes. The only substantial change in ALSA core is about the additional error handling in the compress-offload API. Below are highlights: - Add the error propagating support in compress-offload API - HD-audio: a usual Dell headset fixup, an Intel HDMI/DP fix, and the default mixer setup change ot turn off the loopback - Lots of updates for ASoC Intel drivers, mostly board support and bug fixing, and to the NAU8825 driver - Work on generalizing bits of simple-card to allow more code sharing with the Renesas rsrc-card (which can't use simple-card due to DPCM) - Removal of the Odroid X2 driver due to replacement with simple-card - Support for several new Mediatek platforms and associated boards - New ASoC drivers for Allwinner A10, Analog Devices ADAU7002, Broadcom Cygnus, Cirrus Logic CS35L33 and CS53L30, Maxim MAX8960 and MAX98504, Realtek RT5514 and Wolfson WM8758 -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIrBAABCAAVBQJXnaohDhx0aXdhaUBzdXNlLmRlAAoJEGwxgFQ9KSmkdh0P+wde 9YXRP7lugnai2keRR5ibev118qHvwcoLycdNSSutjydK1gbZtRNcVOiAO9KRKqxs nv4lM7TduFHDjsBrD26iMxFHqdnyuI2Xd5nddpPfTteCLtLLu72RYrRrubZB/SC9 Pi2PwMg+FkwaAG+/HXcWFIDNIxqhUXg2jHIhWlvWyvEvIZgJntvZaD1vw3NQqmE/ EAbafpdNXewY2IPxsQ+4zVD6JUTh4RTY790R4vZptO7E0oRksmffzAbX+XiYpiam pVwZAhyj05jy4DGsio89ufA51EC58oV8xfo6jxQh6wiXjr7ArhBh/60EoV7VMYh7 aouFQ+EOox3p/rcoyaaHbGROnCk0WIc2milQHM41F3Q6iC0fxOep14kSjxOXXqYg tgIjduptExh9XsEdpTCHfnmOyXEq+7PFbqmfluoKvG1q//k4u3d8SEicBfJMuWO+ Fb/v2ngii0r3D7rwsl4ONEShJdVd+mbpg2d6DoOu1/UYMfTGaxR/vF3DD7gCmn0A qikZkOnmmVttDVc8YlsmMZyo2ATU3AWsnNhdZGDGGT5IaAppZ+h3H5JZKNhxo5my cK6JbSMCljkmcc8GM990P6BNngya3doiu5aox8hM2uWugHcWYvjyoigGUhGVJdlT DgGtxlZ+5dQptdP0gAe5qO/Fzn9gfwvZQZxgSdaS =zx3K -----END PGP SIGNATURE----- Merge tag 'sound-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "The majority of this update is about ASoC, including a few new drivers, and the rest are mostly minor changes. The only substantial change in ALSA core is about the additional error handling in the compress-offload API. Below are highlights: - Add the error propagating support in compress-offload API - HD-audio: a usual Dell headset fixup, an Intel HDMI/DP fix, and the default mixer setup change ot turn off the loopback - Lots of updates for ASoC Intel drivers, mostly board support and bug fixing, and to the NAU8825 driver - Work on generalizing bits of simple-card to allow more code sharing with the Renesas rsrc-card (which can't use simple-card due to DPCM) - Removal of the Odroid X2 driver due to replacement with simple-card - Support for several new Mediatek platforms and associated boards - New ASoC drivers for Allwinner A10, Analog Devices ADAU7002, Broadcom Cygnus, Cirrus Logic CS35L33 and CS53L30, Maxim MAX8960 and MAX98504, Realtek RT5514 and Wolfson WM8758" * tag 'sound-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (278 commits) sound: oss: Use kernel_read_file_from_path() for mod_firmware_load() ASoC: Intel: Skylake: Delete an unnecessary check before the function call "release_firmware" ASoC: Intel: Skylake: Fix NULL Pointer exception in dynamic_debug. ASoC: samsung: Specify DMA channels through struct snd_dmaengine_pcm_config ASoC: samsung: Fix error paths in the I2S driver's probe() ASoC: cs53l30: Fix bit shift issue of TDM mode ASoC: cs53l30: Fix a bug for TDM slot location validation ASoC: rockchip: correct the spdif clk ALSA: echoaudio: purge contradictions between dimension matrix members and total number of members ASoC: rsrc-card: use asoc_simple_card_parse_card_name() ASoC: rsrc-card: use asoc_simple_dai instead of rsrc_card_dai ASoC: rsrc-card: use asoc_simple_card_parse_dailink_name() ASoC: simple-card: use asoc_simple_card_parse_card_name() ASoC: simple-card-utils: add asoc_simple_card_parse_card_name() ASoC: simple-card: use asoc_simple_card_parse_dailink_name() ASoC: simple-card-utils: add asoc_simple_card_set_dailink_name() ASoC: nau8825: drop redundant idiom when converting integer to boolean ASoC: nau8825: jack connection decision with different insertion logic ASoC: mediatek: Add HDMI dai-links to the mt8173-rt5650 machine driver ASoC: mediatek: mt2701: fix non static symbol warning ... |
|
Linus Torvalds | bad60e6f25 |
powerpc updates for 4.8 # 1
Highlights: - PowerNV PCI hotplug support. - Lots more Power9 support. - eBPF JIT support on ppc64le. - Lots of cxl updates. - Boot code consolidation. Bug fixes: - Fix spin_unlock_wait() from Boqun Feng - Fix stack pointer corruption in __tm_recheckpoint() from Michael Neuling - Fix multiple bugs in memory_hotplug_max() from Bharata B Rao - mm: Ensure "special" zones are empty from Oliver O'Halloran - ftrace: Separate the heuristics for checking call sites from Michael Ellerman - modules: Never restore r2 for a mprofile-kernel style mcount() call from Michael Ellerman - Fix endianness when reading TCEs from Alexey Kardashevskiy - start rtasd before PCI probing from Greg Kurz - PCI: rpaphp: Fix slot registration for multiple slots under a PHB from Tyrel Datwyler - powerpc/mm: Add memory barrier in __hugepte_alloc() from Sukadev Bhattiprolu Cleanups & fixes: - Drop support for MPIC in pseries from Rashmica Gupta - Define and use PPC64_ELF_ABI_v2/v1 from Michael Ellerman - Remove unused symbols in asm-offsets.c from Rashmica Gupta - Fix SRIOV not building without EEH enabled from Russell Currey - Remove kretprobe_trampoline_holder. from Thiago Jung Bauermann - Reduce log level of PCI I/O space warning from Benjamin Herrenschmidt - Add array bounds checking to crash_shutdown_handlers from Suraj Jitindar Singh - Avoid -maltivec when using clang integrated assembler from Anton Blanchard - Fix array overrun in ppc_rtas() syscall from Andrew Donnellan - Fix error return value in cmm_mem_going_offline() from Rasmus Villemoes - export cpu_to_core_id() from Mauricio Faria de Oliveira - Remove old symbols from defconfigs from Andrew Donnellan - Update obsolete comments in setup_32.c about entry conditions from Benjamin Herrenschmidt - Add comment explaining the purpose of setup_kdump_trampoline() from Benjamin Herrenschmidt - Merge the RELOCATABLE config entries for ppc32 and ppc64 from Kevin Hao - Remove RELOCATABLE_PPC32 from Kevin Hao - Fix .long's in tlb-radix.c to more meaningful from Balbir Singh Minor cleanups & fixes: - Andrew Donnellan, Anna-Maria Gleixner, Anton Blanchard, Benjamin Herrenschmidt, Bharata B Rao, Christophe Leroy, Colin Ian King, Geliang Tang, Greg Kurz, Madhavan Srinivasan, Michael Ellerman, Michael Ellerman, Stephen Rothwell, Stewart Smith. Freescale updates from Scott: - "Highlights include more 8xx optimizations, device tree updates, and MVME7100 support." PowerNV PCI hotplug from Gavin Shan: - PCI: Add pcibios_setup_bridge() - Override pcibios_setup_bridge() - Remove PCI_RESET_DELAY_US - Move pnv_pci_ioda_setup_opal_tce_kill() around - Increase PE# capacity - Allocate PE# in reverse order - Create PEs in pcibios_setup_bridge() - Setup PE for root bus - Extend PCI bridge resources - Make pnv_ioda_deconfigure_pe() visible - Dynamically release PE - Update bridge windows on PCI plug - Delay populating pdn - Support PCI slot ID - Use PCI slot reset infrastructure - Introduce pnv_pci_get_slot_id() - Functions to get/set PCI slot state - PCI/hotplug: PowerPC PowerNV PCI hotplug driver - Print correct PHB type names Power9 idle support from Shreyas B. Prabhu: - set power_save func after the idle states are initialized - Use PNV_THREAD_WINKLE macro while requesting for winkle - make hypervisor state restore a function - Rename idle_power7.S to idle_book3s.S - Rename reusable idle functions to hardware agnostic names - Make pnv_powersave_common more generic - abstraction for saving SPRs before entering deep idle states - Add platform support for stop instruction - cpuidle/powernv: Use CPUIDLE_STATE_MAX instead of MAX_POWERNV_IDLE_STATES - cpuidle/powernv: cleanup cpuidle-powernv.c - cpuidle/powernv: Add support for POWER ISA v3 idle states - Use deepest stop state when cpu is offlined Power9 PMU from Madhavan Srinivasan: - factor out power8 pmu macros and defines - factor out power8 pmu functions - factor out power8 __init_pmu code - Add power9 event list macros for generic and cache events - Power9 PMU support - Export Power9 generic and cache events to sysfs Power9 preliminary interrupt & PCI support from Benjamin Herrenschmidt: - Add XICS emulation APIs - Move a few exception common handlers to make room - Add support for HV virtualization interrupts - Add mechanism to force a replay of interrupts - Add ICP OPAL backend - Discover IODA3 PHBs - pci: Remove obsolete SW invalidate - opal: Add real mode call wrappers - Rename TCE invalidation calls - Remove SWINV constants and obsolete TCE code - Rework accessing the TCE invalidate register - Fallback to OPAL for TCE invalidations - Use the device-tree to get available range of M64's - Check status of a PHB before using it - pci: Don't try to allocate resources that will be reassigned Other Power9: - Send SIGBUS on unaligned copy and paste from Chris Smart - Large Decrementer support from Oliver O'Halloran - Load Monitor Register Support from Jack Miller Performance improvements from Anton Blanchard: - Avoid load hit store in __giveup_fpu() and __giveup_altivec() - Avoid load hit store in setup_sigcontext() - Remove assembly versions of strcpy, strcat, strlen and strcmp - Align hot loops of some string functions eBPF JIT from Naveen N. Rao: - Fix/enhance 32-bit Load Immediate implementation - Optimize 64-bit Immediate loads - Introduce rotate immediate instructions - A few cleanups - Isolate classic BPF JIT specifics into a separate header - Implement JIT compiler for extended BPF Operator Panel driver from Suraj Jitindar Singh: - devicetree/bindings: Add binding for operator panel on FSP machines - Add inline function to get rc from an ASYNC_COMP opal_msg - Add driver for operator panel on FSP machines Sparse fixes from Daniel Axtens: - make some things static - Introduce asm-prototypes.h - Include headers containing prototypes - Use #ifdef __BIG_ENDIAN__ #else for REG_BYTE - kvm: Clarify __user annotations - Pass endianness to sparse - Make ppc_md.{halt, restart} __noreturn MM fixes & cleanups from Aneesh Kumar K.V: - radix: Update LPCR HR bit as per ISA - use _raw variant of page table accessors - Compile out radix related functions if RADIX_MMU is disabled - Clear top 16 bits of va only on older cpus - Print formation regarding the the MMU mode - hash: Update SDR1 size encoding as documented in ISA 3.0 - radix: Update PID switch sequence - radix: Update machine call back to support new HCALL. - radix: Add LPID based tlb flush helpers - radix: Add a kernel command line to disable radix - Cleanup LPCR defines Boot code consolidation from Benjamin Herrenschmidt: - Move epapr_paravirt_early_init() to early_init_devtree() - cell: Don't use flat device-tree after boot - ge_imp3a: Don't use the flat device-tree after boot - mpc85xx_ds: Don't use the flat device-tree after boot - mpc85xx_rdb: Don't use the flat device-tree after boot - Don't test for machine type in rtas_initialize() - Don't test for machine type in smp_setup_cpu_maps() - dt: Add of_device_compatible_match() - Factor do_feature_fixup calls - Move 64-bit feature fixup earlier - Move 64-bit memory reserves to setup_arch() - Use a cachable DART - Move FW feature probing out of pseries probe() - Put exception configuration in a common place - Remove early allocation of the SMU command buffer - Move MMU backend selection out of platform code - pasemi: Remove IOBMAP allocation from platform probe() - mm/hash: Don't use machine_is() early during boot - Don't test for machine type to detect HEA special case - pmac: Remove spurrious machine type test - Move hash table ops to a separate structure - Ensure that ppc_md is empty before probing for machine type - Move 64-bit probe_machine() to later in the boot process - Move 32-bit probe() machine to later in the boot process - Get rid of ppc_md.init_early() - Move the boot time info banner to a separate function - Move setting of {i,d}cache_bsize to initialize_cache_info() - Move the content of setup_system() to setup_arch() - Move cache info inits to a separate function - Re-order the call to smp_setup_cpu_maps() - Re-order setup_panic() - Make a few boot functions __init - Merge 32-bit and 64-bit setup_arch() Other new features: - tty/hvc: Use IRQF_SHARED for OPAL hvc consoles from Sam Mendoza-Jonas - tty/hvc: Use opal irqchip interface if available from Sam Mendoza-Jonas - powerpc: Add module autoloading based on CPU features from Alastair D'Silva - crypto: vmx - Convert to CPU feature based module autoloading from Alastair D'Silva - Wake up kopald polling thread before waiting for events from Benjamin Herrenschmidt - xmon: Dump ISA 2.06 SPRs from Michael Ellerman - xmon: Dump ISA 2.07 SPRs from Michael Ellerman - Add a parameter to disable 1TB segs from Oliver O'Halloran - powerpc/boot: Add OPAL console to epapr wrappers from Oliver O'Halloran - Assign fixed PHB number based on device-tree properties from Guilherme G. Piccoli - pseries: Add pseries hotplug workqueue from John Allen - pseries: Add support for hotplug interrupt source from John Allen - pseries: Use kernel hotplug queue for PowerVM hotplug events from John Allen - pseries: Move property cloning into its own routine from Nathan Fontenot - pseries: Dynamic add entires to associativity lookup array from Nathan Fontenot - pseries: Auto-online hotplugged memory from Nathan Fontenot - pseries: Remove call to memblock_add() from Nathan Fontenot cxl: - Add set and get private data to context struct from Michael Neuling - make base more explicitly non-modular from Paul Gortmaker - Use for_each_compatible_node() macro from Wei Yongjun - Frederic Barrat - Abstract the differences between the PSL and XSL - Make vPHB device node match adapter's - Philippe Bergheaud - Add mechanism for delivering AFU driver specific events - Ignore CAPI adapters misplaced in switched slots - Refine slice error debug messages - Andrew Donnellan - static-ify variables to fix sparse warnings - PCI/hotplug: pnv_php: export symbols and move struct types needed by cxl - PCI/hotplug: pnv_php: handle OPAL_PCI_SLOT_OFFLINE power state - Add cxl_check_and_switch_mode() API to switch bi-modal cards - remove dead Kconfig options - fix potential NULL dereference in free_adapter() - Ian Munsie - Update process element after allocating interrupts - Add support for CAPP DMA mode - Fix allowing bogus AFU descriptors with 0 maximum processes - Fix allocating a minimum of 2 pages for the SPA - Fix bug where AFU disable operation had no effect - Workaround XSL bug that does not clear the RA bit after a reset - Fix NULL pointer dereference on kernel contexts with no AFU interrupts - powerpc/powernv: Split cxl code out into a separate file - Add cxl_slot_is_supported API - Enable bus mastering for devices using CAPP DMA mode - Move cxl_afu_get / cxl_afu_put to base - Allow a default context to be associated with an external pci_dev - Do not create vPHB if there are no AFU configuration records - powerpc/powernv: Add support for the cxl kernel api on the real phb - Add support for using the kernel API with a real PHB - Add kernel APIs to get & set the max irqs per context - Add preliminary workaround for CX4 interrupt limitation - Add support for interrupts on the Mellanox CX4 - Workaround PE=0 hardware limitation in Mellanox CX4 - powerpc/powernv: Fix pci-cxl.c build when CONFIG_MODULES=n selftests: - Test unaligned copy and paste from Chris Smart - Load Monitor Register Tests from Jack Miller - Cyril Bur - exec() with suspended transaction - Use signed long to read perf_event_paranoid - Fix usage message in context_switch - Fix generation of vector instructions/types in context_switch - Michael Ellerman - Use "Delta" rather than "Error" in normal output - Import Anton's mmap & futex micro benchmarks - Add a test for PROT_SAO -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJXnWchAAoJEFHr6jzI4aWAe64P/36Vd9yJLptjkoyZp8/IQtu1 Cv8buQwGdKuSMzdkcUAOXcC3fe2u70ZWXMKKLfY3koIV1IAiqdWk5/XWRKMP2XmE dG0LhSf0uu7uh+mE0WvQnRu46ImeKtQ+mPp4Hbs/s9SxMSeYjruv3vdWWmgUq0cl Gac2qJSRtAMmgLuHWMjf7N5mxOTOnKejU4o2i9cJ+YHmWKOdCigv2Ge1UadOQFlC E7tRPiUR3asfDfj+e+LVTTdToH6p8pk+mOUzIoZ8jIkQ+IXzi62UDl5+Rw9mqiuX 1CtqEMUXxo2qwX+d4TcV/QUOp0YKPuIcUZ9NMMS+S3lOyJ4NFt+j2Izk7QJp5kNP gKVqB68TjDQsBuDr3P9ynlHbduxTIhZAqopbTrLe0FIg48nUe4n1yHJBVzqaVajX rFBJSsSUffBLAARNPSXJJhIgc2C1/qOC8dgMeDMcR2kPirDHaQZ/lY1yEpq1yiqR q6e3v5hvIAm4IjbYk0mF7TUxBrPGVE/ExyBINyASRoYxAJ1PyeD/iljZ9vI3asRA s+hhxT8H3f7lnqTrmJqMjHgAdGkmag07EdmvFNX4xK4aADSy7Y6g4dw25ffRopo9 p9Jf9HX+dZv65Y3UjbV/6HuXcaSEBJJLSVWvii65PebqSN0LuHEFvNeIJ6Iblx0B AWh/hd0Iin2gdkcG39Mr =Z5kM -----END PGP SIGNATURE----- Merge tag 'powerpc-4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Highlights: - PowerNV PCI hotplug support. - Lots more Power9 support. - eBPF JIT support on ppc64le. - Lots of cxl updates. - Boot code consolidation. Bug fixes: - Fix spin_unlock_wait() from Boqun Feng - Fix stack pointer corruption in __tm_recheckpoint() from Michael Neuling - Fix multiple bugs in memory_hotplug_max() from Bharata B Rao - mm: Ensure "special" zones are empty from Oliver O'Halloran - ftrace: Separate the heuristics for checking call sites from Michael Ellerman - modules: Never restore r2 for a mprofile-kernel style mcount() call from Michael Ellerman - Fix endianness when reading TCEs from Alexey Kardashevskiy - start rtasd before PCI probing from Greg Kurz - PCI: rpaphp: Fix slot registration for multiple slots under a PHB from Tyrel Datwyler - powerpc/mm: Add memory barrier in __hugepte_alloc() from Sukadev Bhattiprolu Cleanups & fixes: - Drop support for MPIC in pseries from Rashmica Gupta - Define and use PPC64_ELF_ABI_v2/v1 from Michael Ellerman - Remove unused symbols in asm-offsets.c from Rashmica Gupta - Fix SRIOV not building without EEH enabled from Russell Currey - Remove kretprobe_trampoline_holder from Thiago Jung Bauermann - Reduce log level of PCI I/O space warning from Benjamin Herrenschmidt - Add array bounds checking to crash_shutdown_handlers from Suraj Jitindar Singh - Avoid -maltivec when using clang integrated assembler from Anton Blanchard - Fix array overrun in ppc_rtas() syscall from Andrew Donnellan - Fix error return value in cmm_mem_going_offline() from Rasmus Villemoes - export cpu_to_core_id() from Mauricio Faria de Oliveira - Remove old symbols from defconfigs from Andrew Donnellan - Update obsolete comments in setup_32.c about entry conditions from Benjamin Herrenschmidt - Add comment explaining the purpose of setup_kdump_trampoline() from Benjamin Herrenschmidt - Merge the RELOCATABLE config entries for ppc32 and ppc64 from Kevin Hao - Remove RELOCATABLE_PPC32 from Kevin Hao - Fix .long's in tlb-radix.c to more meaningful from Balbir Singh Minor cleanups & fixes: - Andrew Donnellan, Anna-Maria Gleixner, Anton Blanchard, Benjamin Herrenschmidt, Bharata B Rao, Christophe Leroy, Colin Ian King, Geliang Tang, Greg Kurz, Madhavan Srinivasan, Michael Ellerman, Michael Ellerman, Stephen Rothwell, Stewart Smith. Freescale updates from Scott: - "Highlights include more 8xx optimizations, device tree updates, and MVME7100 support." PowerNV PCI hotplug from Gavin Shan: - PCI: Add pcibios_setup_bridge() - Override pcibios_setup_bridge() - Remove PCI_RESET_DELAY_US - Move pnv_pci_ioda_setup_opal_tce_kill() around - Increase PE# capacity - Allocate PE# in reverse order - Create PEs in pcibios_setup_bridge() - Setup PE for root bus - Extend PCI bridge resources - Make pnv_ioda_deconfigure_pe() visible - Dynamically release PE - Update bridge windows on PCI plug - Delay populating pdn - Support PCI slot ID - Use PCI slot reset infrastructure - Introduce pnv_pci_get_slot_id() - Functions to get/set PCI slot state - PCI/hotplug: PowerPC PowerNV PCI hotplug driver - Print correct PHB type names Power9 idle support from Shreyas B. Prabhu: - set power_save func after the idle states are initialized - Use PNV_THREAD_WINKLE macro while requesting for winkle - make hypervisor state restore a function - Rename idle_power7.S to idle_book3s.S - Rename reusable idle functions to hardware agnostic names - Make pnv_powersave_common more generic - abstraction for saving SPRs before entering deep idle states - Add platform support for stop instruction - cpuidle/powernv: Use CPUIDLE_STATE_MAX instead of MAX_POWERNV_IDLE_STATES - cpuidle/powernv: cleanup cpuidle-powernv.c - cpuidle/powernv: Add support for POWER ISA v3 idle states - Use deepest stop state when cpu is offlined Power9 PMU from Madhavan Srinivasan: - factor out power8 pmu macros and defines - factor out power8 pmu functions - factor out power8 __init_pmu code - Add power9 event list macros for generic and cache events - Power9 PMU support - Export Power9 generic and cache events to sysfs Power9 preliminary interrupt & PCI support from Benjamin Herrenschmidt: - Add XICS emulation APIs - Move a few exception common handlers to make room - Add support for HV virtualization interrupts - Add mechanism to force a replay of interrupts - Add ICP OPAL backend - Discover IODA3 PHBs - pci: Remove obsolete SW invalidate - opal: Add real mode call wrappers - Rename TCE invalidation calls - Remove SWINV constants and obsolete TCE code - Rework accessing the TCE invalidate register - Fallback to OPAL for TCE invalidations - Use the device-tree to get available range of M64's - Check status of a PHB before using it - pci: Don't try to allocate resources that will be reassigned Other Power9: - Send SIGBUS on unaligned copy and paste from Chris Smart - Large Decrementer support from Oliver O'Halloran - Load Monitor Register Support from Jack Miller Performance improvements from Anton Blanchard: - Avoid load hit store in __giveup_fpu() and __giveup_altivec() - Avoid load hit store in setup_sigcontext() - Remove assembly versions of strcpy, strcat, strlen and strcmp - Align hot loops of some string functions eBPF JIT from Naveen N. Rao: - Fix/enhance 32-bit Load Immediate implementation - Optimize 64-bit Immediate loads - Introduce rotate immediate instructions - A few cleanups - Isolate classic BPF JIT specifics into a separate header - Implement JIT compiler for extended BPF Operator Panel driver from Suraj Jitindar Singh: - devicetree/bindings: Add binding for operator panel on FSP machines - Add inline function to get rc from an ASYNC_COMP opal_msg - Add driver for operator panel on FSP machines Sparse fixes from Daniel Axtens: - make some things static - Introduce asm-prototypes.h - Include headers containing prototypes - Use #ifdef __BIG_ENDIAN__ #else for REG_BYTE - kvm: Clarify __user annotations - Pass endianness to sparse - Make ppc_md.{halt, restart} __noreturn MM fixes & cleanups from Aneesh Kumar K.V: - radix: Update LPCR HR bit as per ISA - use _raw variant of page table accessors - Compile out radix related functions if RADIX_MMU is disabled - Clear top 16 bits of va only on older cpus - Print formation regarding the the MMU mode - hash: Update SDR1 size encoding as documented in ISA 3.0 - radix: Update PID switch sequence - radix: Update machine call back to support new HCALL. - radix: Add LPID based tlb flush helpers - radix: Add a kernel command line to disable radix - Cleanup LPCR defines Boot code consolidation from Benjamin Herrenschmidt: - Move epapr_paravirt_early_init() to early_init_devtree() - cell: Don't use flat device-tree after boot - ge_imp3a: Don't use the flat device-tree after boot - mpc85xx_ds: Don't use the flat device-tree after boot - mpc85xx_rdb: Don't use the flat device-tree after boot - Don't test for machine type in rtas_initialize() - Don't test for machine type in smp_setup_cpu_maps() - dt: Add of_device_compatible_match() - Factor do_feature_fixup calls - Move 64-bit feature fixup earlier - Move 64-bit memory reserves to setup_arch() - Use a cachable DART - Move FW feature probing out of pseries probe() - Put exception configuration in a common place - Remove early allocation of the SMU command buffer - Move MMU backend selection out of platform code - pasemi: Remove IOBMAP allocation from platform probe() - mm/hash: Don't use machine_is() early during boot - Don't test for machine type to detect HEA special case - pmac: Remove spurrious machine type test - Move hash table ops to a separate structure - Ensure that ppc_md is empty before probing for machine type - Move 64-bit probe_machine() to later in the boot process - Move 32-bit probe() machine to later in the boot process - Get rid of ppc_md.init_early() - Move the boot time info banner to a separate function - Move setting of {i,d}cache_bsize to initialize_cache_info() - Move the content of setup_system() to setup_arch() - Move cache info inits to a separate function - Re-order the call to smp_setup_cpu_maps() - Re-order setup_panic() - Make a few boot functions __init - Merge 32-bit and 64-bit setup_arch() Other new features: - tty/hvc: Use IRQF_SHARED for OPAL hvc consoles from Sam Mendoza-Jonas - tty/hvc: Use opal irqchip interface if available from Sam Mendoza-Jonas - powerpc: Add module autoloading based on CPU features from Alastair D'Silva - crypto: vmx - Convert to CPU feature based module autoloading from Alastair D'Silva - Wake up kopald polling thread before waiting for events from Benjamin Herrenschmidt - xmon: Dump ISA 2.06 SPRs from Michael Ellerman - xmon: Dump ISA 2.07 SPRs from Michael Ellerman - Add a parameter to disable 1TB segs from Oliver O'Halloran - powerpc/boot: Add OPAL console to epapr wrappers from Oliver O'Halloran - Assign fixed PHB number based on device-tree properties from Guilherme G. Piccoli - pseries: Add pseries hotplug workqueue from John Allen - pseries: Add support for hotplug interrupt source from John Allen - pseries: Use kernel hotplug queue for PowerVM hotplug events from John Allen - pseries: Move property cloning into its own routine from Nathan Fontenot - pseries: Dynamic add entires to associativity lookup array from Nathan Fontenot - pseries: Auto-online hotplugged memory from Nathan Fontenot - pseries: Remove call to memblock_add() from Nathan Fontenot cxl: - Add set and get private data to context struct from Michael Neuling - make base more explicitly non-modular from Paul Gortmaker - Use for_each_compatible_node() macro from Wei Yongjun - Frederic Barrat - Abstract the differences between the PSL and XSL - Make vPHB device node match adapter's - Philippe Bergheaud - Add mechanism for delivering AFU driver specific events - Ignore CAPI adapters misplaced in switched slots - Refine slice error debug messages - Andrew Donnellan - static-ify variables to fix sparse warnings - PCI/hotplug: pnv_php: export symbols and move struct types needed by cxl - PCI/hotplug: pnv_php: handle OPAL_PCI_SLOT_OFFLINE power state - Add cxl_check_and_switch_mode() API to switch bi-modal cards - remove dead Kconfig options - fix potential NULL dereference in free_adapter() - Ian Munsie - Update process element after allocating interrupts - Add support for CAPP DMA mode - Fix allowing bogus AFU descriptors with 0 maximum processes - Fix allocating a minimum of 2 pages for the SPA - Fix bug where AFU disable operation had no effect - Workaround XSL bug that does not clear the RA bit after a reset - Fix NULL pointer dereference on kernel contexts with no AFU interrupts - powerpc/powernv: Split cxl code out into a separate file - Add cxl_slot_is_supported API - Enable bus mastering for devices using CAPP DMA mode - Move cxl_afu_get / cxl_afu_put to base - Allow a default context to be associated with an external pci_dev - Do not create vPHB if there are no AFU configuration records - powerpc/powernv: Add support for the cxl kernel api on the real phb - Add support for using the kernel API with a real PHB - Add kernel APIs to get & set the max irqs per context - Add preliminary workaround for CX4 interrupt limitation - Add support for interrupts on the Mellanox CX4 - Workaround PE=0 hardware limitation in Mellanox CX4 - powerpc/powernv: Fix pci-cxl.c build when CONFIG_MODULES=n selftests: - Test unaligned copy and paste from Chris Smart - Load Monitor Register Tests from Jack Miller - Cyril Bur - exec() with suspended transaction - Use signed long to read perf_event_paranoid - Fix usage message in context_switch - Fix generation of vector instructions/types in context_switch - Michael Ellerman - Use "Delta" rather than "Error" in normal output - Import Anton's mmap & futex micro benchmarks - Add a test for PROT_SAO" * tag 'powerpc-4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (263 commits) powerpc/mm: Parenthesise IS_ENABLED() in if condition tty/hvc: Use opal irqchip interface if available tty/hvc: Use IRQF_SHARED for OPAL hvc consoles selftests/powerpc: exec() with suspended transaction powerpc: Improve comment explaining why we modify VRSAVE powerpc/mm: Drop unused externs for hpte_init_beat[_v3]() powerpc/mm: Rename hpte_init_lpar() and move the fallback to a header powerpc/mm: Fix build break when PPC_NATIVE=n crypto: vmx - Convert to CPU feature based module autoloading powerpc: Add module autoloading based on CPU features powerpc/powernv/ioda: Fix endianness when reading TCEs powerpc/mm: Add memory barrier in __hugepte_alloc() powerpc/modules: Never restore r2 for a mprofile-kernel style mcount() call powerpc/ftrace: Separate the heuristics for checking call sites powerpc: Merge 32-bit and 64-bit setup_arch() powerpc/64: Make a few boot functions __init powerpc: Re-order setup_panic() powerpc: Re-order the call to smp_setup_cpu_maps() powerpc/32: Move cache info inits to a separate function powerpc/64: Move the content of setup_system() to setup_arch() ... |
|
Linus Torvalds | f64d6e2aaa |
DeviceTree update for 4.8:
- Removal of most of_platform_populate() calls in arch code. Now the DT core code calls it in the default case and platforms only need to call it if they have special needs. - Use pr_fmt on all the DT core print statements. - CoreSight binding doc improvements to block name descriptions. - Add dt_to_config script which can parse dts files and list corresponding kernel config options. - Fix memory leak hit with a PowerMac DT. - Correct a bunch of STMicro compatible strings to use the correct vendor prefix. - Fix DA9052 PMIC binding doc to match what is actually used in dts files. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJXm9KcAAoJEPr7XbWNvGHDRT4QAIIIOSB4AWHardnMLROgGge9 aOQKZ/05O9feOcxYKe8FkQbcH+IujJjrUL+yrRD36yGQPAyBP21gtcmmfrkCcwFM kH915f/JbGvXpfwEf8dcarHhzYH6FFJiQGduPpWfwSSWynx+xq5EKPwCqYzMg8bN SExxt7vUx1MKFOExZ0K8BNCo8VMVLUWQoJ1DNeJDuL25Op4EU3i2l1HQNYV/3XDk BSA3x7Lw3GjrWEH20VWYn2Azq1OFLY+E2FC2lnG4nbkk5X8dZbUH9PR1Sk7uTQDj uxTjWe59NBpliCxKSAbMbTAU/WwSB1pJ0I+zDJBiQsdFT+nb5F4zOrs3qSKHa/A9 Rv6AC8k5gdSMrDB1dOspfF2vWvOOInXgNV4/Kza0D92mbCpwyUuF+vhE6rfcMrZU OiD7rj2/fvO7Y9fUAhrp6zrfrOfH9B1Z9vS+940AlK96YwPE2+J0SA2vBxR/wg8H 7fj4Ud5X+SFisXWQhh5Wlv0W9o6e7C7fsi8vpkQ7gufmezLFWVnJKsUfQaxGEwhG Hkhm9kuSHHMd+6dEnn2756DnNfJAtQv6rSR0/QR4Lf9y5L4dvR3kAQIci8X/nx4P sIk+IJWGZG6wziZq59hh+SO6HEqdSNuvh+5sbR0iUimdE/1HsDBdPiocXf/r8iwK NY9nGeZPRrXmFgdpoZfm =wLMr -----END PGP SIGNATURE----- Merge tag 'devicetree-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree updates from Rob Herring: - remove most of_platform_populate() calls in arch code. Now the DT core code calls it in the default case and platforms only need to call it if they have special needs - use pr_fmt on all the DT core print statements - CoreSight binding doc improvements to block name descriptions - add dt_to_config script which can parse dts files and list corresponding kernel config options - fix memory leak hit with a PowerMac DT - correct a bunch of STMicro compatible strings to use the correct vendor prefix - fix DA9052 PMIC binding doc to match what is actually used in dts files * tag 'devicetree-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (35 commits) documentation: da9052: Update regulator bindings names to match DA9052/53 DTS expectations xtensa: Partially Revert "xtensa: Remove unnecessary of_platform_populate with default match table" xtensa: Fix build error due to missing include file MIPS: ath79: Add missing include file Fix spelling errors in Documentation/devicetree ARM: dts: fix STMicroelectronics compatible strings powerpc/dts: fix STMicroelectronics compatible strings Documentation: dt: i2c: use correct STMicroelectronics vendor prefix scripts/dtc: dt_to_config - kernel config options for a devicetree of: fdt: mark unflattened tree as detached of: overlay: add resolver error prints coresight: document binding acronyms Documentation/devicetree: document cavium-pip rx-delay/tx-delay properties of: use pr_fmt prefix for all console printing of/irq: Mark initialised interrupt controllers as populated of: fix memory leak related to safe_name() Revert "of/platform: export of_default_bus_match_table" of: unittest: use of_platform_default_populate() to populate default bus memory: omap-gpmc: use of_platform_default_populate() to populate default bus bus: uniphier-system-bus: use of_platform_default_populate() to populate default bus ... |
|
Linus Torvalds | 1056c9bd27 |
The bulk of the changes are updates and fixes to existing clk provider
drivers, along with a pretty standard number of new drivers. The core recieved a small number of updates as well. Core changes of note: * Removed CLK_IS_ROOT flag New clk provider drivers: * Renesas r8a7796 Clock Pulse Generator / Module Standby and Software Reset * Allwinner sun8i H3 Clock Controller Unit * AmLogic meson8b clock controller (rewritten) * AmLogic gxbb clock controller * Support for some new ICs was added by simple changes to static data tables for chips sharing the same family Driver updates of note: * the Allwinner sunxi clock driver infrastucture was rewritten to comform to the state of the art at drivers/clk/sunxi-ng. The old implementation is still supported for backwards compatibility with the DT ABI -----BEGIN PGP SIGNATURE----- iQIcBAABCAAGBQJXm9LNAAoJEKI6nJvDJaTUHYcP/1oKTHA4uSPux2+5l9vApEJc eSV0oSEP/zDDwYfV4xRt1byAOtzHe3R4p5zDGShnk3+CCwXbQSLGmFJFmZDoSs5E ulftXA8uRV4ac0SEh86BOlstdJHGOVo7Q38XtdPvgKRTv58+ZqHuFcvB726bWY/I GMzVTkpugbn5U7e3MLM58gkBoqa8BS9uIdsf5q/JIxdpe+VgUtjmioH9Rz6G5U5Y T6ObeU6HNusDaz6kUJIiAEkl4UNHk+aebnY7FTbwd9JGGySp5nEknVY7tSMeC6iU hG/knzdMiasa5yv0xdW3/OxnKCQtEeuPPHnJDSXWc9yb20vNs2QhRtd8uckMGHOH X7fXq9xoLxDH81AggW188g7+xfhx7J+ASpjHmHs74itUIoqhhy61PM3I95yQ8m6s QDkInqSszFd2C7OiYsy6m5XS0K8g0jyA2tzWhxlIZNVAl7yP71+HVLJ45NNKCPkb oYbMx4ho538Tl6+c6HHJG0vC3XWSdHbvwMOKyE9k/GyrIJ7FxLZS3BLOYPm6u9t4 9n041MbtBb/UrWVi8kMSdmBjIIs6VSGjq5gwRFAqoPQt3VkPuy0IfnwIpjdE1aFz PbDJQF4ze7D3JgH2rWtivXbCTRthTANmoar299xjSwwb99TSlP2IABY3cNnJrhPr 9/PGShM3hqRpBEUnEmt+ =1dpY -----END PGP SIGNATURE----- Merge tag 'clk-for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Michael Turquette: "The bulk of the changes are updates and fixes to existing clk provider drivers, along with a pretty standard number of new drivers. The core recieved a small number of updates as well. Core changes of note: - removed CLK_IS_ROOT flag New clk provider drivers: - Renesas r8a7796 clock pulse generator / module standby and software reset - Allwinner sun8i H3 clock controller unit - AmLogic meson8b clock controller (rewritten) - AmLogic gxbb clock controller - support for some new ICs was added by simple changes to static data tables for chips sharing the same family Driver updates of note: - the Allwinner sunxi clock driver infrastucture was rewritten to comform to the state of the art at drivers/clk/sunxi-ng. The old implementation is still supported for backwards compatibility with the DT ABI" * tag 'clk-for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (162 commits) clk: Makefile: re-sort and clean up Revert "clk: gxbb: expose CLKID_MMC_PCLK" clk: samsung: Allow modular build of the Audio Subsystem CLKCON driver clk: samsung: make clk-s5pv210-audss explicitly non-modular clk: exynos5433: remove CLK_IGNORE_UNUSED flag from SPI clocks clk: oxnas: Add hardware dependencies clk: imx7d: do not set parent of ethernet time/ref clocks ARM: dt: sun8i: switch the H3 to the new CCU driver clk: sunxi-ng: h3: Fix Kconfig symbol typo clk: sunxi-ng: h3: Fix audio clock divider offset clk: sunxi-ng: Add H3 clocks clk: sunxi-ng: Add N-K-M-P factor clock clk: sunxi-ng: Add N-K-M Factor clock clk: sunxi-ng: Add N-M-factor clock support clk: sunxi-ng: Add N-K-factor clock support clk: sunxi-ng: Add M-P factor clock support clk: sunxi-ng: Add divider clk: sunxi-ng: Add phase clock support clk: sunxi-ng: Add mux clock support clk: sunxi-ng: Add gate clock support ... |
|
Linus Torvalds | 7a1e8b80fb |
Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security subsystem updates from James Morris: "Highlights: - TPM core and driver updates/fixes - IPv6 security labeling (CALIPSO) - Lots of Apparmor fixes - Seccomp: remove 2-phase API, close hole where ptrace can change syscall #" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (156 commits) apparmor: fix SECURITY_APPARMOR_HASH_DEFAULT parameter handling tpm: Add TPM 2.0 support to the Nuvoton i2c driver (NPCT6xx family) tpm: Factor out common startup code tpm: use devm_add_action_or_reset tpm2_i2c_nuvoton: add irq validity check tpm: read burstcount from TPM_STS in one 32-bit transaction tpm: fix byte-order for the value read by tpm2_get_tpm_pt tpm_tis_core: convert max timeouts from msec to jiffies apparmor: fix arg_size computation for when setprocattr is null terminated apparmor: fix oops, validate buffer size in apparmor_setprocattr() apparmor: do not expose kernel stack apparmor: fix module parameters can be changed after policy is locked apparmor: fix oops in profile_unpack() when policy_db is not present apparmor: don't check for vmalloc_addr if kvzalloc() failed apparmor: add missing id bounds check on dfa verification apparmor: allow SYS_CAP_RESOURCE to be sufficient to prlimit another task apparmor: use list_next_entry instead of list_entry_next apparmor: fix refcount race when finding a child profile apparmor: fix ref count leak when profile sha1 hash is read apparmor: check that xindex is in trans_table bounds ... |
|
Steve Twiss | 099c0cbd20 |
documentation: da9052: Update regulator bindings names to match DA9052/53 DTS expectations
Buck and LDO binding name changes. The binding names for the regulators have been changed to match the current expectation from existing device tree source files. This fix rectifies the disparity between what currently exists in some .dts[i] board files and what is listed in this binding document. This change re-aligns those differences and also brings the binding document in-line with the expectations of the product datasheet from Dialog Semiconductor. Bucks and LDOs now follow the expected notation: { buck1, buck2, buck3, buck4 } { ldo1, ldo2, ldo3, ldo4, ldo5, ldo6, ldo7, ldo8, ldo9, ldo10 } Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Rob Herring <robh@kernel.org> |
|
Linus Torvalds | d94ba9e7d8 |
This is the bulk of pin control changes for the v4.8 kernel cycle.
New drivers: - New driver for Oxnas pin control and GPIO. This ARM-based chipset is used in a few storage (NAS) type devices. - New driver for the MAX77620/MAX20024 pin controller portions. - New driver for the Intel Merrifield pin controller. New subdrivers: - New subdriver for the Qualcomm MDM9615 - New subdriver for the STM32F746 MCU - New subdriver for the Broadcom NSP SoC. Cleanups: - Demodularization of bool compiled-in drivers. Apart from this there is just regular incremental improvements to a lot of drivers, especially Uniphier and PFC. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJXmcthAAoJEEEQszewGV1z2ukP/1T34tgMllEzBcnyTM28pnPl 80anOiCi/jkLuW1hYTLc4Rx0tZT2oWw9hrZdKGNMuzNCaJSmFaRhUrbzxhZ8E+6O 3AHYSopAYUTKVYJsuY+fs3HbNajKBsSWYdmxin4e953BPudLjhZ2WliDXxupsbwZ /KI6s8J2pDZcPurrlozT5Avp3BTwwCq+fo12NIMkkmuhURb69OsDAVjPlwjocq73 BKcdH8AdgO7w5Ss5/IQbvrhyuFc2kCQ/wH1tiuE2a4iYWhp+QkMOEqWUSdYs33bx Sbn3KTK6IYYS1eb4xharh7H/zoBs20aCQ2kS8qbYmG+Fv7rB7qboI0qM7m7+25O8 7F6Tf4F0HUg6IjcABcI5lFuTxACBG8p5ZlmQAp/36EaeIblLALBCvd1ArmZ6fdG+ Pzu5vLaZBAmxQn6EseHLAJkH4FEzV7II/Sk7U23TINHUpl/L2GJO+6irz7eelKAk XED6mrNU8rRnZMka02ZnIgIbABG7ELNJsRxEnf8k9CX7cfi4p568eZeR1nfKcy4+ uldJLipNv3NfwuRY5JEEa7pFW4azYmnzS1GcoVYPy7snYc4Rr8cbBD6YvcxyMhVz RXHc21mj45JnboldAYU59t5BbVZNwZqF8hmg935ngoaZjYfhhnfGoNQF7hy6/1fS bwojoQtBqGcriKZYGs0o =po0g -----END PGP SIGNATURE----- Merge tag 'pinctrl-v4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v4.8 kernel cycle. Nothing stands out as especially exiting: new drivers, new subdrivers, lots of cleanups and incremental features. Business as usual. New drivers: - New driver for Oxnas pin control and GPIO. This ARM-based chipset is used in a few storage (NAS) type devices. - New driver for the MAX77620/MAX20024 pin controller portions. - New driver for the Intel Merrifield pin controller. New subdrivers: - New subdriver for the Qualcomm MDM9615 - New subdriver for the STM32F746 MCU - New subdriver for the Broadcom NSP SoC. Cleanups: - Demodularization of bool compiled-in drivers. Apart from this there is just regular incremental improvements to a lot of drivers, especially Uniphier and PFC" * tag 'pinctrl-v4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (131 commits) pinctrl: fix pincontrol definition for marvell pinctrl: xway: fix typo Revert "pinctrl: amd: make it explicitly non-modular" pinctrl: iproc: Add NSP and Stingray GPIO support pinctrl: Update iProc GPIO DT bindings pinctrl: bcm: add OF dependencies pinctrl: ns2: remove redundant dev_err call in ns2_pinmux_probe() pinctrl: Add STM32F746 MCU support pinctrl: intel: Protect set wake flow by spin lock pinctrl: nsp: remove redundant dev_err call in nsp_pinmux_probe() pinctrl: uniphier: add Ethernet pin-mux settings sh-pfc: Use PTR_ERR_OR_ZERO() to simplify the code pinctrl: ns2: fix return value check in ns2_pinmux_probe() pinctrl: qcom: update DT bindings with ebi2 groups pinctrl: qcom: establish proper EBI2 pin groups pinctrl: imx21: Remove the MODULE_DEVICE_TABLE() macro Documentation: dt: Add new compatible to STM32 pinctrl driver bindings includes: dt-bindings: Add STM32F746 pinctrl DT bindings pinctrl: sunxi: fix nand0 function name for sun8i pinctrl: uniphier: remove pointless pin-mux settings for PH1-LD11 ... |
|
Linus Torvalds | 6039b80eb5 |
dmaengine updates for 4.8-rc1
This time we have bit of largish changes: New drivers: - Xilinx zynqmp dma engine driver. - Marvell xor2 driver. Updates: - dmatest sg support. - updates and enhancements to Xilinx drivers, adding of cyclic mode. - clock handling fixes across drivers. - removal of OOM messages on kzalloc across subsystem. - interleaved transfers support in omap driver. - runtime pm support in qcom bam dma. - tasklet kill freeup across drivers. - irq cleanup on remove across drivers. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJXmZj8AAoJEHwUBw8lI4NHANYP/0e7LkiopiBdxKyYNwViyrfL XGsB3Fcd8MvYnojzlRUNUi5dt86YfXM5JixMWg8e2WeDSK9AXBEpRBHlEJXA7FNn /BXy8FZxW4YkXOBSOL+GbDgC48CRiQrmoHSsYE1e9qosJTTpDJlTMd0I3EmdAK53 wjNKBYGv5ORNMXdYXJe/6uUqbN0QT7Qr7a9+Q1qgwhF1wd8pKjVXvDD6Qj2NeM8L OCySngBECDWTCEYpuNXHbtp/s8QpWteGwCTyQYTkuNsFYM2H3nQCXi9ObMOGR9IN 44FpLgeLeIgW03F/1DmVvMWDYgCgow+b1usqHRWC7x33K/ArqzZzAsPyKePqOBU5 B9zzAla+/QKi73mKauqgHl/Siokr9FZdFpvTVWf2ssm/k3b3GJMO9tPPJ2ocyvZ6 lwlHrTMOV9n2tzeBkkadgLPWO6yDlcYlDVjj1P36DzC88GhjEfFOlq3tqcEJWxmR adDFX2yRXdtpA6XSiI9l7jxUHxBWZwOTPJ6h1gznk/wVVd0TjyzZteX2gPc8lkcL Aedhyx0zgGl5bE4+eBsNKLiOrUj468j7Cb87Hhe4YygDw/2T2Ff5RDGxQ9iRrkCb YRPP21453VS01GuF2T1vzziJ/tGl8IwIon1EOSsTXuImH1sm7Or3W+Cyrke9AZgo 0M8kfHJ2EfcRnwHE8N2H =tYp0 -----END PGP SIGNATURE----- Merge tag 'dmaengine-4.8-rc1' of git://git.infradead.org/users/vkoul/slave-dma Pull dmaengine updates from Vinod Koul: "This time we have bit of largish changes: two new drivers, bunch of updates and cleanups to existing set. Nothing super exciting though. New drivers: - Xilinx zynqmp dma engine driver - Marvell xor2 driver Updates: - dmatest sg support - updates and enhancements to Xilinx drivers, adding of cyclic mode - clock handling fixes across drivers - removal of OOM messages on kzalloc across subsystem - interleaved transfers support in omap driver - runtime pm support in qcom bam dma - tasklet kill freeup across drivers - irq cleanup on remove across drivers" * tag 'dmaengine-4.8-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (94 commits) dmaengine: k3dma: add missing clk_disable_unprepare() on error in k3_dma_probe() dmaengine: zynqmp_dma: add missing MODULE_LICENSE dmaengine: qcom_hidma: use for_each_matching_node() macro dmaengine: zynqmp_dma: Fix static checker warning dmaengine: omap-dma: Support for interleaved transfer dmaengine: ioat: statify symbol dmaengine: pxa_dma: implement device_synchronize dmaengine: imx-sdma: remove assignment never used dmaengine: imx-sdma: remove dummy assignment dmaengine: cppi: remove unused and bogus check dmaengine: qcom_hidma_lli: kill the tasklets upon exit dmaengine: pxa_dma: remove owner assignment dmaengine: fsl_raid: remove owner assignment dmaengine: coh901318: remove owner assignment dmaengine: qcom_hidma: kill the tasklets upon exit dmaengine: txx9dmac: explicitly freeup irq dmaengine: sirf-dma: kill the tasklets upon exit dmaengine: s3c24xx: kill the tasklets upon exit dmaengine: s3c24xx: explicitly freeup irq dmaengine: pl330: explicitly freeup irq ... |
|
Linus Torvalds | ce8c891c34 |
remoteproc updates for v4.8
Introduce remoteproc driver for controlling the modem/DSP Hexagon CPU found in a multitude of Qualcomm platform. Also cleans up a race condition/potential leak during registration of remoteprocs and includes devicetree bindings in the MAINTAINERS entry. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJXmQY5AAoJEAsfOT8Nma3FzGMP/jq1S/DLm2vRIw547Ev04LQ0 4suaKkovLMhGp2xsGsz50gxpV1YBo4MTI3DYXBP/kr4U3aCHIw+1mXwiJ1pWsv30 4MWVheD5hLeyK0JMFiEPwmI22zlX81YA0WPOimu82WUAyqQ86Zcix1KPVfHbq5SP 80aiX64BZu0PXUFAhhBUaW4qy/2nj4gcvN6Ied8LCwDTmCIBSE2LsjxaxKvxLIgA OMWpMGfz6jIleC4kqFDs2qL4rhQh/5cRm+QOntlehOsJfrp7QN1yaJ0WahsQWRjk AQjweQn7zgbzj5VPcpqCx9K4NhOa1Y/vZM/i3EPlYUKwV3cJnk5BgsyB1zyXd2s5 +Ul42y8pPTeBgwKisT6BhWLQE13uYViuM4N+rqCX1sH4c5wTzScCDz5tC300Plj9 omXiJmLRnAJ6soQGEnoYl6S7+e873hqOuHFvqCfkxFWVOlJ5blODOFAHXC/8Gwch cKG2P0Hpp8KZNljgBhIvU7AHRWOfeojZvezx5epb902rZKLXrvgKOOkbAwklr9wu lAKdbS/lunPIA5Lbom4db7zOAPa8QWNHpHGsCc4MDMY6hcoGA5FZALIdEdqimnro rrG52apH2EKyWPpsLtJ0vglpmFUz1euabQCGkR1roYvDjXxN8SpC08mcX92r4XOM cFxetFZDcF4f98PG96AY =XlWX -----END PGP SIGNATURE----- Merge tag 'rproc-v4.8' of git://github.com/andersson/remoteproc Pull remoteproc updates from Bjorn Andersson: "Introduce remoteproc driver for controlling the modem/DSP Hexagon CPU found in a multitude of Qualcomm platform. Also cleans up a race condition/potential leak during registration of remoteprocs and includes devicetree bindings in the MAINTAINERS entry" * tag 'rproc-v4.8' of git://github.com/andersson/remoteproc: remoteproc: qcom: hexagon: Clean up mpss validation remoteproc: qcom: remove redundant dev_err call in q6v5_init_mem() remoteproc: qcom: Driver for the self-authenticating Hexagon v5 dt-binding: remoteproc: Introduce Hexagon loader binding remoteproc: Fix potential race condition in rproc_add MAINTAINERS: Add file patterns for remoteproc device tree bindings |
|
Rob Rice | b04f127286 |
dt-bindings: add bindings documentation for PDC driver.
Add the device tree binding documentation for the PDC hardware in Broadcom iProc SoCs. Signed-off-by: Rob Rice <rob.rice@broadcom.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Ray Jui <ray.jui@broadcom.com> Reviewed-by: Anup Patel <anup.patel@broadcom.com> Reviewed-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> |
|
Linus Torvalds | 6a492b0f23 |
SCSI misc on 20160727
This update includes the usual round of driver updates (fcoe, lpfc, ufs, qla2xxx, hisi_sas). The most important other change is removing the flag to allow non-blk_mq on a per host basis (it's unused); there is still a global module parameter for all of SCSI just in case. The rest are an assortment of minor fixes and typo updates. Signed-off-by: James Bottomley <jejb@linux.vnet.ibm.com> -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAABAgAGBQJXmKE4AAoJEAVr7HOZEZN4Ph0P/0WbMd2+KF0PMcSmejEfZnYF v63+bldM5745VyDoMmicz8pd5HmoxXNQKLRKO6Wk5r95cZ1BHsWKzXzULP22BlIm 67ca12s7vUI0jaDR3RkVYtzW2MDU3sLH4dgt/12zr1aKd7Y+N+nk+FPwpiatJMzK FQoSmGgy5m3g93oI4g0ou3zyJQ+eorh/wY6b554xrnh5p+Sgam2Gy9T5WOnCriKg o2Luxh93hIqabvN8cjWkmtLNYYRAdNRexqrUJ+h/3id5xSsqMDllwkJk457MnRn+ sKHKCCuorz0N5V/knBw1d9gtcv+lTNC4n3k8Bi4BA7Az0wB0tkP6TIQtY1EJpLno UCAghj9k8OgIMav7/vjH8zAEqAbSDQWIb/C8r2j4gQkknNL7POXEo2Epxdcm1uwy KTRQVBjhKSq9euyKMLD5EzWo4fUdaSFS5wffOxH3oUxfuQsMyO4MfgZ37fi1WWX3 d/KGWBjjSIV1oWd74exdXkZhXcI08WLMDtm6BBBBK9lB/BaGLvwyEvvKSQmgf84p 7t+0TgZ592RCQhgaGJMh9/k9Y2XSqXYS3/J4Yab2kmvqXdQgwMiOx5hYbrJtAIIF RaaIvIICsIDplLTUhn56ngzmPQsh9mKcc2Uf4cMEjy/Y0Bdr+PiN/BzSoj63pkPR QWh8B+JSPJBwjlpsqtL5 =vRgI -----END PGP SIGNATURE----- Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI updates from James Bottomley: "This update includes the usual round of driver updates (fcoe, lpfc, ufs, qla2xxx, hisi_sas). The most important other change is removing the flag to allow non-blk_mq on a per host basis (it's unused); there is still a global module parameter for all of SCSI just in case. The rest are an assortment of minor fixes and typo updates" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (101 commits) scsi:libsas: fix oops caused by assigning a freed task to ->lldd_task fnic: pci_dma_mapping_error() doesn't return an error code scsi: lpfc: avoid harmless comparison warning fcoe: implement FIP VLAN responder fcoe: Rename 'fip_frame' to 'fip_vn2vn_notify_frame' lpfc: call lpfc_sli_validate_fcp_iocb() with the hbalock held scsi: ufs: remove unnecessary goto label hpsa: change hpsa_passthru_ioctl timeout hpsa: correct skipping masked peripherals qla2xxx: Update driver version to 8.07.00.38-k qla2xxx: Fix BBCR offset qla2xxx: Fix duplicate message id. qla2xxx: Disable the adapter and skip error recovery in case of register disconnect. qla2xxx: Separate ISP type bits out from device type. qla2xxx: Correction to function qla26xx_dport_diagnostics(). qla2xxx: Add support to handle Loop Init error Asynchronus event. qla2xxx: Let DPORT be enabled purely by nvram. qla2xxx: Add bsg interface to support statistics counter reset. qla2xxx: Add bsg interface to support D_Port Diagnostics. qla2xxx: Check for device state before unloading the driver. ... |
|
Linus Torvalds | d85486d471 |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov: "Updates for the input subsystem. This contains the following new drivers promised in the last merge window: - driver for touchscreen controller found in Surface 3 - driver for Pegasus Notetaker tablet - driver for Atmel Captouch Buttons - driver for Raydium I2C touchscreen controllers - powerkey driver for HISI 65xx SoC plus a few fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (40 commits) Input: tty/vt/keyboard - use memdup_user() Input: pegasus_notetaker - set device mode in reset_resume() if in use Input: pegasus_notetaker - cancel workqueue's work in suspend() Input: pegasus_notetaker - fix usb_autopm calls to be balanced Input: pegasus_notetaker - handle usb control msg errors Input: wacom_w8001 - handle errors from input_mt_init_slots() Input: wacom_w8001 - resolution wasn't set for ABS_MT_POSITION_X/Y Input: pixcir_ts - add support for axis inversion / swapping Input: icn8318 - use of_touchscreen helpers for inverting / swapping axes Input: edt-ft5x06 - add support for inverting / swapping axes Input: of_touchscreen - add support for inverted / swapped axes Input: synaptics-rmi4 - use the RMI_F11_REL_BYTES define in rmi_f11_rel_pos_report Input: synaptics-rmi4 - remove unneeded variable Input: synaptics-rmi4 - remove pointer to rmi_function in f12_data Input: synaptics-rmi4 - support regulator supplies Input: raydium_i2c_ts - check CRC of incoming packets Input: xen-kbdfront - prefer xenbus_write() over xenbus_printf() where possible Input: fix a double word "is is" in include/linux/input.h Input: add powerkey driver for HISI 65xx SoC Input: apanel - spelling mistake - "skiping" -> "skipping" ... |
|
Linus Torvalds | 66304207cd |
Merge branch 'i2c/for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang: "Here is the I2C pull request for 4.8: - the core and i801 driver gained support for SMBus Host Notify - core support for more than one address in DT - i2c_add_adapter() has now better error messages. We can remove all error messages from drivers calling it as a next step. - bigger updates to rk3x driver to support rk3399 SoC - the at24 eeprom driver got refactored and can now read special variants with unique serials or fixed MAC addresses. The rest is regular driver updates and bugfixes" * 'i2c/for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (66 commits) i2c: i801: use IS_ENABLED() instead of checking for built-in or module Documentation: i2c: slave: give proper example for pm usage Documentation: i2c: slave: describe buffer problems a bit better i2c: bcm2835: Don't complain on -EPROBE_DEFER from getting our clock i2c: i2c-smbus: drop useless stubs i2c: efm32: fix a failure path in efm32_i2c_probe() Revert "i2c: core: Cleanup I2C ACPI namespace" Revert "i2c: core: Add function for finding the bus speed from ACPI" i2c: Update the description of I2C_SMBUS i2c: i2c-smbus: fix i2c_handle_smbus_host_notify documentation eeprom: at24: tweak the loop_until_timeout() macro eeprom: at24: add support for at24mac series eeprom: at24: support reading the serial number for 24csxx eeprom: at24: platform_data: use BIT() macro eeprom: at24: split at24_eeprom_write() into specialized functions eeprom: at24: split at24_eeprom_read() into specialized functions eeprom: at24: hide the read/write loop behind a macro eeprom: at24: call read/write functions via function pointers eeprom: at24: coding style fixes eeprom: at24: move at24_read() below at24_eeprom_write() ... |
|
Linus Torvalds | 7ae0ae4a02 |
spi: Updates for v4.8
Quite a lot of cleanup and maintainence work going on this release in various drivers, and also a fix for a nasty locking issue in the core: - A fix for locking issues when external drivers explicitly locked the bus with spi_bus_lock() - we were using the same lock to both control access to the physical bus in multi-threaded I/O operations and exclude multiple callers. Confusion between these two caused us to have scenarios where we were dropping locks. These are fixed by splitting into two separate locks like should have been done originally, making everything much clearer and correct. - Support for DMA in spi_flash_read(). - Support for instantiating spidev on ACPI systems, including some test devices used in Windows validation. - Use of the core DMA mapping functionality in the McSPI driver. - Start of support for ThunderX SPI controllers, involving a very big set of changes to the Cavium driver. - Support for Braswell, Exynos 5433, Kaby Lake, Merrifield, RK3036, RK3228, RK3368 controllers. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQEcBAABAgAGBQJXmPFBAAoJECTWi3JdVIfQbisH/355nT/cyqc08l9iC+a1zRDw /Bf5kN8pqmu6+y3sMjAIdptZQTlXhgR4q1ZH+oNSfowCVgvJYWF6RVCEXDBh6XHs YBQAFlYeSOO5cLTPQSDnn06oFucV/HZJppC6hM0SNclbVboeMBBS6S6aljXqMbj+ mFvtq6/iEsG6kgQcmcl3fm/SMOYF2OFDJyr66NimBXQGzjx84xJcG0eGk8kCIwEw xyiE/WmB9WT2scFSgAsfaOEE27ozaq9iANNUA/ceUibQgQYpQveBgy4XVXFjEzFo 3BVvPYGGzjebzaXbMwDV6OvSgMwnTsMxjtZGsraxIEOcMdeeMEpn1/Ze4ksWi4c= =R4Zx -----END PGP SIGNATURE----- Merge tag 'spi-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "Quite a lot of cleanup and maintainence work going on this release in various drivers, and also a fix for a nasty locking issue in the core: - A fix for locking issues when external drivers explicitly locked the bus with spi_bus_lock() - we were using the same lock to both control access to the physical bus in multi-threaded I/O operations and exclude multiple callers. Confusion between these two caused us to have scenarios where we were dropping locks. These are fixed by splitting into two separate locks like should have been done originally, making everything much clearer and correct. - Support for DMA in spi_flash_read(). - Support for instantiating spidev on ACPI systems, including some test devices used in Windows validation. - Use of the core DMA mapping functionality in the McSPI driver. - Start of support for ThunderX SPI controllers, involving a very big set of changes to the Cavium driver. - Support for Braswell, Exynos 5433, Kaby Lake, Merrifield, RK3036, RK3228, RK3368 controllers" * tag 'spi-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (64 commits) spi: Split bus and I/O locking spi: octeon: Split driver into Octeon specific and common parts spi: octeon: Move include file from arch/mips to drivers/spi spi: octeon: Put register offsets into a struct spi: octeon: Store system clock freqency in struct octeon_spi spi: octeon: Convert driver to use readq()/writeq() functions spi: pic32-sqi: fixup wait_for_completion_timeout return handling spi: pic32: fixup wait_for_completion_timeout return handling spi: rockchip: limit transfers to (64K - 1) bytes spi: xilinx: Return IRQ_NONE if no interrupts were detected spi: xilinx: Handle errors from platform_get_irq() spi: s3c64xx: restore removed comments spi: s3c64xx: add Exynos5433 compatible for ioclk handling spi: s3c64xx: use error code from clk_prepare_enable() spi: s3c64xx: rename goto labels to meaningful names spi: s3c64xx: document the clocks and the clock-name property spi: s3c64xx: add exynos5433 spi compatible spi: s3c64xx: fix reference leak to master in s3c64xx_spi_remove() spi: spi-sh: Remove deprecated create_singlethread_workqueue spi: spi-topcliff-pch: Remove deprecated create_singlethread_workqueue ... |
|
Linus Torvalds | 607e11ab66 |
New LED class driver:
- LED driver for TI LP3952 6-Channel Color LED LED core improvements: - Only descend into leds directory when CONFIG_NEW_LEDS is set - Add no-op gpio_led_register_device when LED subsystem is disabled - MAINTAINERS: Add file patterns for led device tree bindings LED Trigger core improvements: - return error if invalid trigger name is provided via sysfs LED class drivers improvements - is31fl32xx: define complete i2c_device_id table - is31fl32xx: fix typo in id and match table names - leds-gpio: Set of_node for created LED devices - pca9532: Add device tree support Conversion of IDE trigger to common disk trigger: - leds: convert IDE trigger to common disk trigger - leds: documentation: 'ide-disk' to 'disk-activity' - unicore32: use the new LED disk activity trigger - parisc: use the new LED disk activity trigger - mips: use the new LED disk activity trigger - arm: use the new LED disk activity trigger - powerpc: use the new LED disk activity trigger -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.17 (GNU/Linux) iQIcBAABAgAGBQJXlbvcAAoJEL1qUBy3i3wm1NoP/1ujmu9eljBO/0VyyrZNSWvM F367twUAmfyrC+xos/lyxn8u8yknyLNfbUStU0L/cpz2GQRNwuIS4h+xrkyqsDCj JBCKrZQCqi/Hsj6jBuIUW+s0OFjxhBJpEkeYW7FM6i2+O9EUxZvCuuG2WPQBNayx 73qG4RdHmB+qFWMlIp//iF8OviSSm2sd5+UEAJH8mYwrbCcv2gT7UjIaIRczpo4H JTkc/onR6y/qliUUrbLpMr40bJLA4+p9ZkqEGPS4lsKiUKf5SF7bLg59RNebIF75 FZ52yhAw55KLiF0yokthlay8cBUjsd52lROjANkIe1iEHBiKoJRKLOA9WozY37qu 3/9fKcddiPHxVF3ItcwhrldVru2ZxfWFRz/44rCPDTjKEfsuNN/2EkY8aVYCiHpO 8gSXw/HjLPCSQIp6PVcqGSVZd1VWUYKcJY/xvCa3zQi0r7JdAmYUp76KCkmq9FgB DuQTkxM57ndKiz5WqlGU70mzht43/raqzPOQwLMwz5mGKj/nXvNMKFLQ1xhnyfeY vw7D2f/wqm74cTMhMS40IDlpJ81EoCYpsnzvtIHti3FPeo8wmVNz30H51JvFRdJm hzeju1tdSLwazGBIIAtjLSCLpnkaOq7rMwwGndGO5QCO/+A6gAC3iAKe4YFl+AXV CrS9BAdZSslYg+ddJYg6 =8lmX -----END PGP SIGNATURE----- Merge tag 'leds_for_4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED updates from Jacek Anaszewski: "New LED class driver: - LED driver for TI LP3952 6-Channel Color LED LED core improvements: - Only descend into leds directory when CONFIG_NEW_LEDS is set - Add no-op gpio_led_register_device when LED subsystem is disabled - MAINTAINERS: Add file patterns for led device tree bindings LED Trigger core improvements: - return error if invalid trigger name is provided via sysfs LED class drivers improvements - is31fl32xx: define complete i2c_device_id table - is31fl32xx: fix typo in id and match table names - leds-gpio: Set of_node for created LED devices - pca9532: Add device tree support Conversion of IDE trigger to common disk trigger: - leds: convert IDE trigger to common disk trigger - leds: documentation: 'ide-disk' to 'disk-activity' - unicore32: use the new LED disk activity trigger - parisc: use the new LED disk activity trigger - mips: use the new LED disk activity trigger - arm: use the new LED disk activity trigger - powerpc: use the new LED disk activity trigger" * tag 'leds_for_4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: leds: is31fl32xx: define complete i2c_device_id table leds: is31fl32xx: fix typo in id and match table names leds: LED driver for TI LP3952 6-Channel Color LED leds: leds-gpio: Set of_node for created LED devices leds: triggers: return error if invalid trigger name is provided via sysfs leds: Only descend into leds directory when CONFIG_NEW_LEDS is set leds: Add no-op gpio_led_register_device when LED subsystem is disabled unicore32: use the new LED disk activity trigger parisc: use the new LED disk activity trigger mips: use the new LED disk activity trigger arm: use the new LED disk activity trigger powerpc: use the new LED disk activity trigger leds: documentation: 'ide-disk' to 'disk-activity' leds: convert IDE trigger to common disk trigger leds: pca9532: Add device tree support MAINTAINERS: Add file patterns for led device tree bindings |
|
Linus Torvalds | c79a14defb |
* Altera Arria10 ethernet FIFO buffer support (Thor Thayer)
* Minor cleanups -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJXlbvGAAoJEBLB8Bhh3lVK9g0P/16Z5/WIqrrLjJegcZ3qKb4m u2b5FBwbTDQyj/smZmfZfhZUleO7HDayL188fHPKO11my+Mvjyws8IZCvHshy7+3 b6Krno8NXZuNYtm32srSQQoLE4eN5pookOPMe2KJcRFghwnDqOo0ZfMZ8Lt6RVGg YtqiVZ3DwaqoHUbvxkHvdJuMbtVEZIEC6SzK9t4URmdncAx+3/BTLqDSYc4LaL+B tI6REgMy+QT1IUMImuUbOA5ktd78K+D26YKF9NuTSWNQvwzjSYy4y6WmDsjYpZF6 h6YWgGwERIy6gws5IdvkBMKX0s1RV7/sY6xFBsEQrX+IFywyY5OcI1gPRttD6VAn ORJ4j7WNH8Phqld9YxjEX8yTwGxlxge88J/lb0i9s5jXPMX7ioxAqAjdpsJj6PlA sNDP0fTyCECqME73cWaAS9bdrzB2dgOxEDfcWKWR24vZeHfnh72owD1k+J0iWu9c 0R2usPB1Yjbo6ODGpqG1R+u09LR+RpNe38oT5GcsFrj6/EaGz0kn2QulaNtylsDo J5qkm02X1h3+F8/UHrzKavOGk82IQzLCbcW7eHPmyzkH8PTe1semLk9jHnXN5sK3 uL2nirZQVIF6QLbYxf0Uf2oSVs05xc7u9ZT+QOl6hqh/6/K7DWC45SoABwMXDaHH jXr+y4vtr5IR8GQfZ/nd =mdxx -----END PGP SIGNATURE----- Merge tag 'edac_for_4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp Pull EDAC updates from Borislav Petkov: "This last cycle, Thor was busy adding Arria10 eth FIFO support to the altera_edac driver along with other improvements. We have two cleanups/fixes too. Summary: - Altera Arria10 ethernet FIFO buffer support (Thor Thayer) - Minor cleanups" * tag 'edac_for_4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: ARM: dts: Add Arria10 Ethernet EDAC devicetree entry EDAC, altera: Add Arria10 Ethernet EDAC support EDAC, altera: Add Arria10 ECC memory init functions Documentation: dt: socfpga: Add Arria10 Ethernet binding EDAC, altera: Drop some ifdeffery EDAC, altera: Add panic flag check to A10 IRQ EDAC, altera: Check parent status for Arria10 EDAC block EDAC, altera: Make all private data structures static EDAC: Correct channel count limit EDAC, amd64_edac: Init opstate at the proper time during init EDAC, altera: Handle Arria10 SDRAM child node EDAC, altera: Add ECC Manager IRQ controller support Documentation: dt: socfpga: Add interrupt-controller to ecc-manager |
|
Linus Torvalds | 468fc7ed55 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller: 1) Unified UDP encapsulation offload methods for drivers, from Alexander Duyck. 2) Make DSA binding more sane, from Andrew Lunn. 3) Support QCA9888 chips in ath10k, from Anilkumar Kolli. 4) Several workqueue usage cleanups, from Bhaktipriya Shridhar. 5) Add XDP (eXpress Data Path), essentially running BPF programs on RX packets as soon as the device sees them, with the option to mirror the packet on TX via the same interface. From Brenden Blanco and others. 6) Allow qdisc/class stats dumps to run lockless, from Eric Dumazet. 7) Add VLAN support to b53 and bcm_sf2, from Florian Fainelli. 8) Simplify netlink conntrack entry layout, from Florian Westphal. 9) Add ipv4 forwarding support to mlxsw spectrum driver, from Ido Schimmel, Yotam Gigi, and Jiri Pirko. 10) Add SKB array infrastructure and convert tun and macvtap over to it. From Michael S Tsirkin and Jason Wang. 11) Support qdisc packet injection in pktgen, from John Fastabend. 12) Add neighbour monitoring framework to TIPC, from Jon Paul Maloy. 13) Add NV congestion control support to TCP, from Lawrence Brakmo. 14) Add GSO support to SCTP, from Marcelo Ricardo Leitner. 15) Allow GRO and RPS to function on macsec devices, from Paolo Abeni. 16) Support MPLS over IPV4, from Simon Horman. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1622 commits) xgene: Fix build warning with ACPI disabled. be2net: perform temperature query in adapter regardless of its interface state l2tp: Correctly return -EBADF from pppol2tp_getname. net/mlx5_core/health: Remove deprecated create_singlethread_workqueue net: ipmr/ip6mr: update lastuse on entry change macsec: ensure rx_sa is set when validation is disabled tipc: dump monitor attributes tipc: add a function to get the bearer name tipc: get monitor threshold for the cluster tipc: make cluster size threshold for monitoring configurable tipc: introduce constants for tipc address validation net: neigh: disallow transition to NUD_STALE if lladdr is unchanged in neigh_update() MAINTAINERS: xgene: Add driver and documentation path Documentation: dtb: xgene: Add MDIO node dtb: xgene: Add MDIO node drivers: net: xgene: ethtool: Use phy_ethtool_gset and sset drivers: net: xgene: Use exported functions drivers: net: xgene: Enable MDIO driver drivers: net: xgene: Add backward compatibility drivers: net: phy: xgene: Add MDIO driver ... |
|
Linus Torvalds | 08fd8c1768 |
xen: features and fixes for 4.8-rc0
- ACPI support for guests on ARM platforms. - Generic steal time support for arm and x86. - Support cases where kernel cpu is not Xen VCPU number (e.g., if in-guest kexec is used). - Use the system workqueue instead of a custom workqueue in various places. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQEcBAABAgAGBQJXmLlrAAoJEFxbo/MsZsTRvRQH/1wOMF8BmlbZfR7H3qwDfjst ApNifCiZE08xDtWBlwUaBFAQxyflQS9BBiNZDVK0sysIdXeOdpWV7V0ZjRoLL+xr czsaaGXDcmXxJxApoMDVuT7FeP6rEk6LVAYRoHpVjJjMZGW3BbX1vZaMW4DXl2WM 9YNaF2Lj+rpc1f8iG31nUxwkpmcXFog6ct4tu7HiyCFT3hDkHt/a4ghuBdQItCkd vqBa1pTpcGtQBhSmWzlylN/PV2+NKcRd+kGiwd09/O/rNzogTMCTTWeHKAtMpPYb Cu6oSqJtlK5o0vtr0qyLSWEGIoyjE2gE92s0wN3iCzFY1PldqdsxUO622nIj+6o= =G6q3 -----END PGP SIGNATURE----- Merge tag 'for-linus-4.8-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from David Vrabel: "Features and fixes for 4.8-rc0: - ACPI support for guests on ARM platforms. - Generic steal time support for arm and x86. - Support cases where kernel cpu is not Xen VCPU number (e.g., if in-guest kexec is used). - Use the system workqueue instead of a custom workqueue in various places" * tag 'for-linus-4.8-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (47 commits) xen: add static initialization of steal_clock op to xen_time_ops xen/pvhvm: run xen_vcpu_setup() for the boot CPU xen/evtchn: use xen_vcpu_id mapping xen/events: fifo: use xen_vcpu_id mapping xen/events: use xen_vcpu_id mapping in events_base x86/xen: use xen_vcpu_id mapping when pointing vcpu_info to shared_info x86/xen: use xen_vcpu_id mapping for HYPERVISOR_vcpu_op xen: introduce xen_vcpu_id mapping x86/acpi: store ACPI ids from MADT for future usage x86/xen: update cpuid.h from Xen-4.7 xen/evtchn: add IOCTL_EVTCHN_RESTRICT xen-blkback: really don't leak mode property xen-blkback: constify instance of "struct attribute_group" xen-blkfront: prefer xenbus_scanf() over xenbus_gather() xen-blkback: prefer xenbus_scanf() over xenbus_gather() xen: support runqueue steal time on xen arm/xen: add support for vm_assist hypercall xen: update xen headers xen-pciback: drop superfluous variables xen-pciback: short-circuit read path used for merging write values ... |
|
Linus Torvalds | e831101a73 |
arm64 updates for 4.8:
- Kexec support for arm64 - Kprobes support - Expose MIDR_EL1 and REVIDR_EL1 CPU identification registers to sysfs - Trapping of user space cache maintenance operations and emulation in the kernel (CPU errata workaround) - Clean-up of the early page tables creation (kernel linear mapping, EFI run-time maps) to avoid splitting larger blocks (e.g. pmds) into smaller ones (e.g. ptes) - VDSO support for CLOCK_MONOTONIC_RAW in clock_gettime() - ARCH_HAS_KCOV enabled for arm64 - Optimise IP checksum helpers - SWIOTLB optimisation to only allocate/initialise the buffer if the available RAM is beyond the 32-bit mask - Properly handle the "nosmp" command line argument - Fix for the initialisation of the CPU debug state during early boot - vdso-offsets.h build dependency workaround - Build fix when RANDOMIZE_BASE is enabled with MODULES off -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJXmF/UAAoJEGvWsS0AyF7x+jwP/2fErtX6FTXmdG0c3HBkTpuy gEuzN2ByWbP6Io+unLC6NvbQQb1q6c73PTqjsoeMHUx2o8YK3jgWEBcC+7AuepoZ YGl3r08e75a/fGrgNwEQQC1lNlgjpog4kzVDh5ji6oRXNq+OkjJGUtRPe3gBoqxv NAjviciID/MegQaq4SaMd26AmnjuUGKogo5vlIaXK0SemX9it+ytW7eLAXuVY+gW EvO3Nxk0Y5oZKJF8qRw6oLSmw1bwn2dD26OgfXfCiI30QBookRyWIoXRedUOZmJq D0+Tipd7muO4PbjlxS8aY/wd/alfnM5+TJ6HpGDo+Y1BDauXfiXMf3ktDFE5QvJB KgtICmC0stWwbDT35dHvz8sETsrCMA2Q/IMrnyxG+nj9BxVQU7rbNrxfCXesJy7Q 4EsQbcTyJwu+ECildBezfoei99XbFZyWk2vKSkTCFKzgwXpftGFaffgZ3DIzBAHH IjecDqIFENC8ymrjyAgrGjeFG+2WB/DBgoSS3Baiz6xwQqC4wFMnI3jPECtJjb/U 6e13f+onXu5lF1YFKAiRjGmqa/G1ZMr+uKZFsembuGqsZdAPkzzUHyAE9g4JVO8p t3gc3/M3T7oLSHuw4xi1/Ow5VGb2UvbslFrp7OpuFZ7CJAvhKlHL5rPe385utsFE 7++5WHXHAegeJCDNAKY2 =iJOY -----END PGP SIGNATURE----- Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: - Kexec support for arm64 - Kprobes support - Expose MIDR_EL1 and REVIDR_EL1 CPU identification registers to sysfs - Trapping of user space cache maintenance operations and emulation in the kernel (CPU errata workaround) - Clean-up of the early page tables creation (kernel linear mapping, EFI run-time maps) to avoid splitting larger blocks (e.g. pmds) into smaller ones (e.g. ptes) - VDSO support for CLOCK_MONOTONIC_RAW in clock_gettime() - ARCH_HAS_KCOV enabled for arm64 - Optimise IP checksum helpers - SWIOTLB optimisation to only allocate/initialise the buffer if the available RAM is beyond the 32-bit mask - Properly handle the "nosmp" command line argument - Fix for the initialisation of the CPU debug state during early boot - vdso-offsets.h build dependency workaround - Build fix when RANDOMIZE_BASE is enabled with MODULES off * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (64 commits) arm64: arm: Fix-up the removal of the arm64 regs_query_register_name() prototype arm64: Only select ARM64_MODULE_PLTS if MODULES=y arm64: mm: run pgtable_page_ctor() on non-swapper translation table pages arm64: mm: make create_mapping_late() non-allocating arm64: Honor nosmp kernel command line option arm64: Fix incorrect per-cpu usage for boot CPU arm64: kprobes: Add KASAN instrumentation around stack accesses arm64: kprobes: Cleanup jprobe_return arm64: kprobes: Fix overflow when saving stack arm64: kprobes: WARN if attempting to step with PSTATE.D=1 arm64: debug: remove unused local_dbg_{enable, disable} macros arm64: debug: remove redundant spsr manipulation arm64: debug: unmask PSTATE.D earlier arm64: localise Image objcopy flags arm64: ptrace: remove extra define for CPSR's E bit kprobes: Add arm64 case in kprobe example module arm64: Add kernel return probes support (kretprobes) arm64: Add trampoline code for kretprobes arm64: kprobes instruction simulation support arm64: Treat all entry code as non-kprobe-able ... |
|
Linus Torvalds | f7816ad0f8 |
power supply and reset changes for the v4.8 series
* introduce reboot mode driver * add DT support to max8903 * add power supply support for axp221 * misc. fixes -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABCgAGBQJXlm+bAAoJENju1/PIO/qaHCsP/0bwvb3PlvPozVs7iXba4hbK It6RxQDHl9Q0tvsgRitqoibomBlGqdMXADwr2yXsio255IYqNTKErJasiOn0KkO6 Wuoo9FSiZV6KL1JMBvZOgMydK/x8q2yBKKJKm9JG9srLueJWuZa/4BqOWS4JSFJ6 xlevxxA0XqUzWr6VUXFRTd/YXa0OaRDHaG9JN1NN8qvJWvvYZJLhpDzWdDu83KzU CPEP7g8UeOFLylcmjeHgT9rJuiHbd6UCr4yKjFqLvM6uM9SY/Uinz62u4tKL5zcp /9V4oo8/9RjJnG/gkm4ozAL2Rb1fpeajTZivUX3t+CiEV4Nc8xiQMCMDI2nKSqr4 IF9nghYub+q6q7EfonWZ22Aa6VhGdI6ToG5iK3euag2vkypLYe9GD1tPyAnnxx1o xlnziiveGKcKwSIY3tTOFVAoGqhCWIpM06ZC7/Y9HvM6EPhAr4q4Pq1xNFwr0Rrs OoEobm5cRB7IUtu2Gl0GU/Ku5mDoen2LvSVzIjF36/aGN+atpd7Tkoam7LBtedZA aqsEV/qMfgsIUYWj5/lmLZOQuG6viEou/BWvQz8cczA0U2mFDcgY6UCLMwVeJ7sj ZT+1uVoupcO5UNEULwdzufUmaC0ze7HrGNeXZZwt5S1IWqNsRg71FzqFYYaIwZGy Rnt3P3tSqhxZrz1xeZ6r =bMvA -----END PGP SIGNATURE----- Merge tag 'for-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: - introduce reboot mode driver - add DT support to max8903 - add power supply support for axp221 - misc fixes * tag 'for-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: power: reset: add reboot mode driver dt-bindings: power: reset: add document for reboot-mode driver power_supply: fix return value of get_property power: qcom_smbb: Make an extcon for usb cable detection max8903: adds support for initiation via device tree max8903: adds documentation for device tree bindings. max8903: remove unnecessary 'out of memory' error message. max8903: removes non zero validity checks on gpios. max8903: adds requesting of gpios. max8903: cleans up confusing relationship between dc_valid, dok and dcm. max8903: store pointer to pdata instead of copying it. power_supply: bq27xxx_battery: Group register mappings into one table docs: Move brcm,bcm21664-resetmgr.txt power/reset: make syscon_poweroff() static power: axp20x_usb: Add support for usb power-supply on axp22x pmics power_supply: bq27xxx_battery: Index register numbers by enum power_supply: bq27xxx_battery: Fix copy/paste error in header comment MAINTAINERS: Add file patterns for power supply device tree bindings power: reset: keystone: Enable COMPILE_TEST |
|
Linus Torvalds | 6097d55e10 |
regulator: Updates for v4.8
A quiet regulator API release, a few new drivers and some fixes but nothing too notable. There will also be some updates for the PWM regulator coming through the PWM tree which provide much smoother operation when taking over an already running PWM regulator after boot using some new PWM APIs. - Support for configuration of the initial suspend state from DT. - New drivers for Mediatek MT6323, Ricoh RN5T567 and X-Powers AXP809. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQEcBAABAgAGBQJXlk49AAoJECTWi3JdVIfQM4QH/jg2BGgdQSiuQspidmyN9tpL hZgvUzrKm0eXEvzvTaL4cPymqpDHgQgaWEFo3Kv2WiU+34XIzfKPTt8m0WI37HY9 t4rTMlN8vL4WEMtAlB0i4DH1/jcEOJG2c88+tnSBGb5R8AXXIvx+F9xjWxOoJKJY ccf5QcupDfCJw99rs3Li5eIbHOW2RAcZgurGGUyV01kH+G/9LliNpIKa9uCxK4dw 72aMH6QX+Hjid4UAqwL13C5W3sBDSebYYTwtTW61HosydLv818BfZC8IoezgjBRE unjh6kdxOpcZk0ftciNiNQFLTUhobdYAuQFjUZywNqijpqK28lbFypweP8yhoxg= =rDhl -----END PGP SIGNATURE----- Merge tag 'regulator-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: "A quiet regulator API release, a few new drivers and some fixes but nothing too notable. There will also be some updates for the PWM regulator coming through the PWM tree which provide much smoother operation when taking over an already running PWM regulator after boot using some new PWM APIs. Summary: - Support for configuration of the initial suspend state from DT. - New drivers for Mediatek MT6323, Ricoh RN5T567 and X-Powers AXP809" * tag 'regulator-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (38 commits) regulator: da9053/52: Fix incorrectly stated minimum and maximum voltage limits regulator: mt6323: Constify struct regulator_ops regulator: mt6323: Fix module description regulator: mt6323: Add support for MT6323 regulator regulator: Add document for MT6323 regulator regulator: da9210: addition of device tree support regulator: act8865: Fix missing of_node_put() in act8865_pdata_from_dt() regulator: qcom_smd: Avoid overlapping linear voltage ranges regulator: s2mps11: Fix the voltage linear range for s2mps15 regulator: pwm: Fix regulator ramp delay for continuous mode regulator: da9211: add descriptions for da9212/da9214 mfd: rn5t618: Register restart handler mfd: rn5t618: Register power off callback optionally regulator: rn5t618: Add RN5T567 PMIC support mfd: rn5t618: Add Ricoh RN5T567 PMIC support ARM: dts: meson: minix-neo-x8: define PMIC as power controller regulator: tps65218: force set power-up/down strobe to 3 for dcdc3 regulator: tps65218: Enable suspend configuration regulator: tps65217: Enable suspend configuration regulator: qcom_spmi: Add support for get_mode/set_mode on switches ... |
|
Linus Torvalds | 1cd04d293c |
This is the bulk of GPIO changes for the v4.8 kernel cycle.
Core changes: - The big item is of course the completion of the character device ABI. It has now replaced and surpassed the former unmaintainable sysfs ABI: we can now hammer (bitbang) individual lines or sets of lines and read individual lines or sets of lines from userspace, and we can also register to listen to GPIO events from userspace. As a tie-in we have two new tools in tools/gpio: gpio-hammer and gpio-event-mon that illustrate the proper use of the new ABI. As someone said: the wild west days of GPIO are now over. - Continued to remove the pointless ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB Kconfig symbols. I'm patching hexagon, openrisc, powerpc, sh, unicore, ia64 and microblaze. These are either ACKed by their maintainers or patched anyways after a grace period and no response from maintainers. Some archs (ARM) come in from their trees, and others (x86) are still not fixed, so I might send a second pull request to root it out later in this merge window, or just defer to v4.9. - The GPIO tools are moved to the tools build system. New drivers: - New driver for the MAX77620/MAX20024. - New driver for the Intel Merrifield. - Enabled PCA953x for the TI PCA9536. - Enabled PCA953x for the Intel Edison. - Enabled R8A7792 in the RCAR driver. Driver improvements: - The STMPE and F7188x now supports the .get_direction() callback. - The Xilinx driver supports setting multiple lines at once. - ACPI support for the Vulcan GPIO controller. - The MMIO GPIO driver supports device tree probing. - The Acer One 10 is supported through the _DEP ACPI attribute. Cleanups: - A major cleanup of the OF/DT support code. It is way easier to read and understand now, probably this improves performance too. - Drop a few redundant .owner assignments. - Remove CLPS711x boardfile support: we are 100% DT. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJXlcT4AAoJEEEQszewGV1zACwQAK5SZr0F5c3QvYbJSiJBCGA7 MZKUYHnYoBpZaPKcFKoOXEM1WOvlABlh9U0y0xkL8gQ6giyKup1wYJJCuYgW29gL ny4r7Z8rs2Wm1ujL+FLAwuxIwCY3BnhUucp8YiSaHPBuKRfsHorFPvXiAgLZjNYC Qk3Q48xYW4inw9sy2BbMfsU3CZnkvgy5euooyy1ezwachRhuHdBy/MVCG012PC4s 0d6LGdByEx1uK4NeV7ssPys444M8unep2EWgy6Rvc1U+FmGA487EvL+X8nxTQTj3 uTMxA8nddmZTEeEIqhpRw/dPiFlWxPFwfWmNEre05gKLb/LUK2tgsUOnmIFgVUw/ t41IzdQNLQQZxmiXplZn6s5mAr2VNuTxkRq1CIl4SwQW+Uy4TU3q8aDPkKzsyhiR yw6o6ul0pQs8UZEggnht8ie6JiSnJ55ehI/nlRxpK/797Ff6Yp4FARs3ZtFnQDDu SWewnbRatZQ89lvy4BA7QCWeV4Scjk4k/e2HjUAFnkfMDaYqpi4vTdzwnWdVjd+F hMgu6VnkN3oSE7ZMrKJMh7b7h1uMnIwKBFWbkrlOEuhT1X0ZDsEOBv5juSBPYomN EOIJUyWqxn0ZfxeONbdbCPteYlfJF+TW/rE9LQMxS1nNwsqw2IQW6NCmrM9Nx6Fv FP++26nYMTSh82gwOYw3 =NwcK -----END PGP SIGNATURE----- Merge tag 'gpio-v4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.8 kernel cycle. The big news is the completion of the chardev ABI which I'm very happy about and apart from that it's an ordinary, quite busy cycle. The details are below. The patches are tested in linux-next for some time, patches to other subsystem mostly have ACKs. I got overly ambitious with configureing lines as input for IRQ lines but it turns out that some controllers have their interrupt-enable and input-enabling in orthogonal settings so the assumption that all IRQ lines are input lines does not hold. Oh well, revert and back to the drawing board with that. Core changes: - The big item is of course the completion of the character device ABI. It has now replaced and surpassed the former unmaintainable sysfs ABI: we can now hammer (bitbang) individual lines or sets of lines and read individual lines or sets of lines from userspace, and we can also register to listen to GPIO events from userspace. As a tie-in we have two new tools in tools/gpio: gpio-hammer and gpio-event-mon that illustrate the proper use of the new ABI. As someone said: the wild west days of GPIO are now over. - Continued to remove the pointless ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB Kconfig symbols. I'm patching hexagon, openrisc, powerpc, sh, unicore, ia64 and microblaze. These are either ACKed by their maintainers or patched anyways after a grace period and no response from maintainers. Some archs (ARM) come in from their trees, and others (x86) are still not fixed, so I might send a second pull request to root it out later in this merge window, or just defer to v4.9. - The GPIO tools are moved to the tools build system. New drivers: - New driver for the MAX77620/MAX20024. - New driver for the Intel Merrifield. - Enabled PCA953x for the TI PCA9536. - Enabled PCA953x for the Intel Edison. - Enabled R8A7792 in the RCAR driver. Driver improvements: - The STMPE and F7188x now supports the .get_direction() callback. - The Xilinx driver supports setting multiple lines at once. - ACPI support for the Vulcan GPIO controller. - The MMIO GPIO driver supports device tree probing. - The Acer One 10 is supported through the _DEP ACPI attribute. Cleanups: - A major cleanup of the OF/DT support code. It is way easier to read and understand now, probably this improves performance too. - Drop a few redundant .owner assignments. - Remove CLPS711x boardfile support: we are 100% DT" * tag 'gpio-v4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (67 commits) MAINTAINERS: Add INTEL MERRIFIELD GPIO entry gpio: dwapb: add missing fwnode_handle_put() in dwapb_gpio_get_pdata() gpio: merrifield: Protect irq_ack() and gpio_set() by lock gpio: merrifield: Introduce GPIO driver to support Merrifield gpio: intel-mid: Make it depend to X86_INTEL_MID gpio: intel-mid: Sort header block alphabetically gpio: intel-mid: Remove potentially harmful code gpio: rcar: add R8A7792 support gpiolib: remove duplicated include from gpiolib.c Revert "gpio: convince line to become input in irq helper" gpiolib: of_find_gpio(): Don't discard errors gpio: of: Allow overriding the device node gpio: free handles in fringe cases gpio: tps65218: Add platform_device_id table gpio: max77620: get gpio value based on direction gpio: lynxpoint: avoid potential warning on error path tools/gpio: add install section tools/gpio: move to tools buildsystem gpio: intel-mid: switch to devm_gpiochip_add_data() gpio: 74x164: Use spi_write() helper instead of open coding ... |
|
Linus Torvalds | 9c1958fc32 |
media updates for v4.8-rc1
-----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJXlfJvAAoJEAhfPr2O5OEVtLUP/RpCQ+W3YVryIdmLkdmYXoY7 m2rXtUh7GmzBjaBkFzbRCGZtgROF7zl0e1R3nm4tLbCV4Becw8HO7YiMjqFJm9xr b6IngIyshsHf60Eii3RpLqUFvYrc/DDIMeYf8miwj/PvFAfI2BV9apraexJlpUuI wdyi28cfBHq4WYhubaXKoAyBQ8YRA/t8KNRAkDlifaOaMbSAxWHlmqoSmJWeQx73 KHkSvbRPu4Hjo3R6q/ab8VhqmXeSnbqnQB9lgnxz7AmAZGhOlMYeAhV/K2ZwbBH8 swv36RmJVO59Ov+vNR4p7GGGDL3+qk8JLj4LNVVfOcW0A+t7WrPQEmrL6VsyaZAy /+r4NEOcQN6Z5nFwbr3E0tYJ2Y5jFHOvsBfKd3EEGwty+hCl634akgb0vqtg06cg E2KG+XW983RBadVwEBnEudxJb0fWPWHGhXEqRrwOD+718FNmTqYM6dEvTEyxRup8 EtCLj+eQQ4LmAyZxWyE8A+keKoMFQlHqk9LN9vQ7t7Wxq9mQ+V2l12T/lN4VhdTq 4QZ4mrCMCGEvNcNzgSg6R/9lVb6RHDtMXZ3htbB/w+5xET/IKIANYyg1Hr7ahtdh rTW/4q6n3jtsu6tp5poteFvPzZKAblbrj2EptVzZYkonQ5BeAUisFTtneUL10Jmj EUf/sH0fqoOA0VvV6Tu+ =mrOW -----END PGP SIGNATURE----- Merge tag 'media/v4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - new framework support for HDMI CEC and remote control support - new encoding codec driver for Mediatek SoC - new frontend driver: helene tuner - added support for NetUp almost universal devices, with supports DVB-C/S/S2/T/T2 and ISDB-T - the mn88472 frontend driver got promoted from staging - a new driver for RCar video input - some soc_camera legacy drivers got removed: timb, omap1, mx2, mx3 - lots of driver cleanups, improvements and fixups * tag 'media/v4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (377 commits) [media] cec: always check all_device_types and features [media] cec: poll should check if there is room in the tx queue [media] vivid: support monitor all mode [media] cec: fix test for unconfigured adapter in main message loop [media] cec: limit the size of the transmit queue [media] cec: zero unused msg part after msg->len [media] cec: don't set fh to NULL in CEC_TRANSMIT [media] cec: clear all status fields before transmit and always fill in sequence [media] cec: CEC_RECEIVE overwrote the timeout field [media] cxd2841er: Reading SNR for DVB-C added [media] cxd2841er: Reading BER and UCB for DVB-C added [media] cxd2841er: fix switch-case for DVB-C [media] cxd2841er: fix signal strength scale for ISDB-T [media] cxd2841er: adjust the dB scale for DVB-C [media] cxd2841er: provide signal strength for DVB-C [media] cxd2841er: fix BER report via DVBv5 stats API [media] mb86a20s: apply mask to val after checking for read failure [media] airspy: fix error logic during device register [media] s5p-cec/TODO: add TODO item [media] cec/TODO: drop comment about sphinx documentation ... |
|
Linus Torvalds | 1b3fc0bef8 |
pstore subsystem updates for v4.8
-----BEGIN PGP SIGNATURE----- Version: GnuPG v1 Comment: Kees Cook <kees@outflux.net> iQIcBAABCgAGBQJXloQYAAoJEIly9N/cbcAmGC0QAIpyoiqEuDiJq/XpRg1ux+PC Vyr15Pub9yQYwcrWffMH1Zr0GhlFmXb1iP9rp36zdtMhjBEfq7wegvblLVMlzl6G 7nYt8hJjDh/h8iw1lElgDL2kwUbTym43HoczJNvY/lOmFuUMK8AoDIRYjFTLAKfQ S4KA9MFJe3kDh4OUoQVfQNrC2VReLD4uvXk4EUF0wDYoqjVKyU3WBHOMgEmggKTR cb+fwhg3Lj4cuMMtZqy8wCqZ/hqhaH8giHC9YbIZQyre3ylncH9xUZyfiqS6nQGc eLc03qxqDNsmZvcY6cJgXldLQ3tXM4o96Moakzn2n4sQcW9vh/3oZzDPd7gC8Ei1 GfIXmRBXFhj5JaeHNGJxL6oCywK+JaqxG8nqD7cEcXTzJiHzjn5kKKSFlr3GmI7w 47htXv9t07SMgQW0IlBws5yApfeB62dQXmhZc1kMtbonhGdAZCCUg2Nrv34VxrjX Dp+LCmD5bg/fBrnAt8f+IIQEd3pElngay+SmSEB9XFUejf3pKw8SvcoDbmE3LD7M zGh5bEkptHll2GMInVAt4b4tiC44e7u+0H1Rsi/ttA1cktXZ9hOtFewhXNvfOS2I hAMGSngOdpzR5v9Mof5hJAWrr1CLkoh757UoYMsb8u2V9aQw7oVZ5JRMzjZBU6iC qXqHm4h5P1bpAeit3DLF =fiRI -----END PGP SIGNATURE----- Merge tag 'pstore-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull pstore subsystem updates from Kees Cook: "This expands the supported compressors, fixes some bugs, and finally adds DT bindings" * tag 'pstore-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: pstore/ram: add Device Tree bindings efi-pstore: implement efivars_pstore_exit() pstore: drop file opened reference count pstore: add lzo/lz4 compression support pstore: Cleanup pstore_dump() pstore: Enable compression on normal path (again) ramoops: Only unregister when registered |
|
Linus Torvalds | 75a442efb1 |
Merge branch 'for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata updates from Tejun Heo: "libata saw quite a bit of activities in this cycle: - SMR drive support still being worked on - bug fixes and improvements to misc SCSI command emulation - some low level driver updates" * 'for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (39 commits) libata-scsi: better style in ata_msense_*() AHCI: Clear GHC.IS to prevent unexpectly asserting INTx ata: sata_dwc_460ex: remove redundant dev_err call ata: define ATA_PROT_* in terms of ATA_PROT_FLAG_* libata: remove ATA_PROT_FLAG_DATA libata: remove ata_is_nodata ata: make lba_{28,48}_ok() use ATA_MAX_SECTORS{,_LBA48} libata-scsi: minor cleanup for ata_scsi_zbc_out_xlat libata-scsi: Fix ZBC management out command translation libata-scsi: Fix translation of REPORT ZONES command ata: Handle ATA NCQ NO-DATA commands correctly libata-eh: decode all taskfile protocols ata: fixup ATA_PROT_NODATA libsas: use ata_is_ncq() and ata_has_dma() accessors libata: use ata_is_ncq() accessors libata: return boolean values from ata_is_* libata-scsi: avoid repeated calculation of number of TRIM ranges libata-scsi: reject WRITE SAME (16) with n_block that exceeds limit libata-scsi: rename ata_msense_ctl_mode() to ata_msense_control() libata-scsi: fix D_SENSE bit relection in control mode page ... |
|
Thomas Petazzoni | 0a00ab1204 |
dt-bindings: add DT binding for the Aardvark PCIe controller
Add the documentation for the Device Tree binding for the Aardvark PCIe controller, found on Marvell Armada 3700 ARM64 SoCs. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
|
Linus Torvalds | bbce2ad2d7 |
Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu: "Here is the crypto update for 4.8: API: - first part of skcipher low-level conversions - add KPP (Key-agreement Protocol Primitives) interface. Algorithms: - fix IPsec/cryptd reordering issues that affects aesni - RSA no longer does explicit leading zero removal - add SHA3 - add DH - add ECDH - improve DRBG performance by not doing CTR by hand Drivers: - add x86 AVX2 multibuffer SHA256/512 - add POWER8 optimised crc32c - add xts support to vmx - add DH support to qat - add RSA support to caam - add Layerscape support to caam - add SEC1 AEAD support to talitos - improve performance by chaining requests in marvell/cesa - add support for Araneus Alea I USB RNG - add support for Broadcom BCM5301 RNG - add support for Amlogic Meson RNG - add support Broadcom NSP SoC RNG" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (180 commits) crypto: vmx - Fix aes_p8_xts_decrypt build failure crypto: vmx - Ignore generated files crypto: vmx - Adding support for XTS crypto: vmx - Adding asm subroutines for XTS crypto: skcipher - add comment for skcipher_alg->base crypto: testmgr - Print akcipher algorithm name crypto: marvell - Fix wrong flag used for GFP in mv_cesa_dma_add_iv_op crypto: nx - off by one bug in nx_of_update_msc() crypto: rsa-pkcs1pad - fix rsa-pkcs1pad request struct crypto: scatterwalk - Inline start/map/done crypto: scatterwalk - Remove unnecessary BUG in scatterwalk_start crypto: scatterwalk - Remove unnecessary advance in scatterwalk_pagedone crypto: scatterwalk - Fix test in scatterwalk_done crypto: api - Optimise away crypto_yield when hard preemption is on crypto: scatterwalk - add no-copy support to copychunks crypto: scatterwalk - Remove scatterwalk_bytes_sglen crypto: omap - Stop using crypto scatterwalk_bytes_sglen crypto: skcipher - Remove top-level givcipher interface crypto: user - Remove crypto_lookup_skcipher call crypto: cts - Convert to skcipher ... |
|
Joerg Roedel | f360d3241f | Merge branches 'x86/amd', 'x86/vt-d', 'arm/exynos', 'arm/mediatek', 'arm/msm', 'arm/rockchip', 'arm/smmu' and 'core' into next | |
Iyappan Subramanian | 792a1107fe |
Documentation: dtb: xgene: Add MDIO node
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Tested-by: Fushen Chen <fchen@apm.com> Tested-by: Toan Le <toanle@apm.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> |
|
Linus Torvalds | e65805251f |
Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner: "The irq department delivers: - new core infrastructure to allow better management of multi-queue devices (interrupt spreading, node aware descriptor allocation ...) - a new interrupt flow handler to support the new fangled Intel VMD devices. - yet another new interrupt controller driver. - a series of fixes which addresses sparse warnings, missing includes, missing static declarations etc from Ben Dooks. - a fix for the error handling in the hierarchical domain allocation code. - the usual pile of small updates to core and driver code" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits) genirq: Fix missing irq allocation affinity hint irqdomain: Fix irq_domain_alloc_irqs_recursive() error handling irq/Documentation: Correct result of echnoing 5 to smp_affinity MAINTAINERS: Remove Jiang Liu from irq domains genirq/msi: Fix broken debug output genirq: Add a helper to spread an affinity mask for MSI/MSI-X vectors genirq/msi: Make use of affinity aware allocations genirq: Use affinity hint in irqdesc allocation genirq: Add affinity hint to irq allocation genirq: Introduce IRQD_AFFINITY_MANAGED flag genirq/msi: Remove unused MSI_FLAG_IDENTITY_MAP irqchip/s3c24xx: Fixup IO accessors for big endian irqchip/exynos-combiner: Fix usage of __raw IO irqdomain: Fix disposal of mappings for interrupt hierarchies irqchip/aspeed-vic: Add irq controller for Aspeed doc/devicetree: Add Aspeed VIC bindings x86/PCI/VMD: Use untracked irq handler genirq: Add untracked irq handler irqchip/mips-gic: Populate irq_domain names irqchip/gicv3-its: Implement two-level(indirect) device table support ... |
|
Linus Torvalds | 55392c4c06 |
Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner: "This update provides the following changes: - The rework of the timer wheel which addresses the shortcomings of the current wheel (cascading, slow search for next expiring timer, etc). That's the first major change of the wheel in almost 20 years since Finn implemted it. - A large overhaul of the clocksource drivers init functions to consolidate the Device Tree initialization - Some more Y2038 updates - A capability fix for timerfd - Yet another clock chip driver - The usual pile of updates, comment improvements all over the place" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (130 commits) tick/nohz: Optimize nohz idle enter clockevents: Make clockevents_subsys static clocksource/drivers/time-armada-370-xp: Fix return value check timers: Implement optimization for same expiry time in mod_timer() timers: Split out index calculation timers: Only wake softirq if necessary timers: Forward the wheel clock whenever possible timers/nohz: Remove pointless tick_nohz_kick_tick() function timers: Optimize collect_expired_timers() for NOHZ timers: Move __run_timers() function timers: Remove set_timer_slack() leftovers timers: Switch to a non-cascading wheel timers: Reduce the CPU index space to 256k timers: Give a few structs and members proper names hlist: Add hlist_is_singular_node() helper signals: Use hrtimer for sigtimedwait() timers: Remove the deprecated mod_timer_pinned() API timers, net/ipv4/inet: Initialize connection request timers as pinned timers, drivers/tty/mips_ejtag: Initialize the poll timer as pinned timers, drivers/tty/metag_da: Initialize the poll timer as pinned ... |
|
Kees Cook | 74e630a758 |
Linux 4.7
-----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQEcBAABAgAGBQJXlRXSAAoJEHm+PkMAQRiGG/gH/0Z8O4zWOsrwO+X1mRToRDBH joFOjAmCVe83T1VpF5LYNB+9+owL/dEDt6+ZIswnhH7AfQPjs4RqwS4PcuMbCDVO +mDm0PmfcKaYcQZrB2Z2OwIzRNnfCTVcsDPhIHwuIHk0m4z/xuGZonD8KoAj0+tO 3yJF6sbE1KubDVjOb+lmZZSP3cXA0pDXrNhkYhE4Tsr8fiihGjeXSNJ8t2zPLjxo W3MPqo0rzDvQsOwoF4TWHHagVaFSJlhLBBgqu33fI7uO3jtfQD2G8wG68JCND1j3 qbMoBfTLFV/yQmSIJUt0Wv1axaCcwnjpweEB35A/GEeZ0mNB1rDdoBeI1eKEQkc= =DGFC -----END PGP SIGNATURE----- Merge tag 'v4.7' into for-linus/pstore Linux 4.7 |
|
Geert Uytterhoeven | c682b5cb7e |
watchdog: renesas-wdt: Add support for the r8a7796 wdt
Document support for the Watchdog Timer (WDT) Controller in the Renesas R-Car M3-W (r8a7796) SoC. No driver update is needed. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> |
|
Dong Aisheng | 152f05c783 |
doc: dt: fsl-imx-esdhc: add set tuning start point binding
add tuning start point binding Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> |
|
Shawn Lin | 5f1d1434b7 |
Documentation: mmc: add description for new no-sd* and no-mmc
This patch adds description for no-sd, no-sdio, no-mmc. We expose these to DT as some of the controllers are unable to deal with special cmd type due to hw limitation. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> |